powerpc/virtex: fix various format/casting printk mismatches

Various printk format string in code used by the Xilinx Virtex platform
are not 32-bit/64-bit safe.  Add correct casting to fix the bugs.

Reported-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index b7aefd0..a22e1a2 100644 (file)
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np)
        }
        regs = ioremap(res.start, 32);
 
-       printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
-               res.start, regs);
+       printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+               (unsigned long long) res.start, regs);
 
        /* Setup interrupt controller */
        out_be32(regs + XINTC_IER, 0); /* disable all irqs */

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e6..e28fc3a 100644 (file)
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
 
                /* Okay, it's a data request, set it up for transfer */
                dev_dbg(ace->dev,
-                       "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
-                       req->sector, req->hard_nr_sectors,
+                       "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+                       (unsigned long long) req->sector, req->hard_nr_sectors,
                        req->current_nr_sectors, rq_data_dir(req));
 
                ace->req = req;

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index ed132fe..d161319 100644 (file)
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -626,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
        if (!request_mem_region(drvdata->mem_start,
                                        drvdata->mem_size, DRIVER_NAME)) {
                dev_err(dev, "Couldn't lock memory region at %Lx\n",
-                       regs_res->start);
+                       (unsigned long long) regs_res->start);
                retval = -EBUSY;
                goto failed1;
        }
@@ -645,9 +645,10 @@ static int __devinit hwicap_setup(struct device *dev, int id,
        mutex_init(&drvdata->sem);
        drvdata->is_open = 0;
 
-       dev_info(dev, "ioremap %lx to %p with size %Lx\n",
-                (unsigned long int)drvdata->mem_start,
-                       drvdata->base_address, drvdata->mem_size);
+       dev_info(dev, "ioremap %llx to %p with size %llx\n",
+                (unsigned long long) drvdata->mem_start,
+                drvdata->base_address,
+                (unsigned long long) drvdata->mem_size);
 
        cdev_init(&drvdata->cdev, &hwicap_fops);
        drvdata->cdev.owner = THIS_MODULE;

diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 6a3f8fb..3317148 100644 (file)
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
-       pr_debug("ulite console: port=%p; port->mapbase=%x\n",
-                port, port->mapbase);
+       pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+                port, (unsigned long long) port->mapbase);
 
        if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
                dev_err(port->dev, "Memory region busy\n");

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 5da3d24..40a3a2a 100644 (file)
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 
        /* Put a banner in the log (for DEBUG) */
        dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-       dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
-               (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+       dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+               (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+               fbsize);
 
        return 0;       /* success */