--- /dev/null
+What: /sys/kernel/slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The /sys/kernel/slab directory contains a snapshot of the
+ internal state of the SLUB allocator for each cache. Certain
+ files may be modified to change the behavior of the cache (and
+ any cache it aliases, if any).
+Users: kernel memory tuning tools
+
+What: /sys/kernel/slab/cache/aliases
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The aliases file is read-only and specifies how many caches
+ have merged into this cache.
+
+What: /sys/kernel/slab/cache/align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The align file is read-only and specifies the cache's object
+ alignment in bytes.
+
+What: /sys/kernel/slab/cache/alloc_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_calls file is read-only and lists the kernel code
+ locations from which allocations for this cache were performed.
+ The alloc_calls file only contains information if debugging is
+ enabled for that cache (see Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/alloc_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_fastpath file is read-only and specifies how many
+ objects have been allocated using the fast path.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_from_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_from_partial file is read-only and specifies how
+ many times a cpu slab has been full and it has been refilled
+ by using a slab from the list of partially used slabs.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_refill
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_refill file is read-only and specifies how many
+ times the per-cpu freelist was empty but there were objects
+ available as the result of remote cpu frees.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slab file is read-only and specifies how many times
+ a new slab had to be allocated from the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slowpath file is read-only and specifies how many
+ objects have been allocated using the slow path because of a
+ refill or allocation from a partial or new slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/cache_dma
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cache_dma file is read-only and specifies whether objects
+ are from ZONE_DMA.
+ Available when CONFIG_ZONE_DMA is enabled.
+
+What: /sys/kernel/slab/cache/cpu_slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cpu_slabs file is read-only and displays how many cpu slabs
+ are active and their NUMA locality.
+
+What: /sys/kernel/slab/cache/cpuslab_flush
+Date: April 2009
+KernelVersion: 2.6.31
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file cpuslab_flush is read-only and specifies how many
+ times a cache's cpu slabs have been flushed as the result of
+ destroying or shrinking a cache, a cpu going offline, or as
+ the result of forcing an allocation from a certain node.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/ctor
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The ctor file is read-only and specifies the cache's object
+ constructor function, which is invoked for each object when a
+ new slab is allocated.
+
+What: /sys/kernel/slab/cache/deactivate_empty
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_empty is read-only and specifies how many
+ times an empty cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_full
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_full is read-only and specifies how many
+ times a full cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_remote_frees
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_remote_frees is read-only and specifies how
+ many times a cpu slab has been deactivated and contained free
+ objects that were freed remotely.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_head
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_head is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ head of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_tail
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_tail is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ tail of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/destroy_by_rcu
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The destroy_by_rcu file is read-only and specifies whether
+ slabs (not objects) are freed by rcu.
+
+What: /sys/kernel/slab/cache/free_add_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_add_partial is read-only and specifies how many
+ times an object has been freed in a full slab so that it had to
+ added to its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_calls file is read-only and lists the locations of
+ object frees if slab debugging is enabled (see
+ Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/free_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_fastpath file is read-only and specifies how many
+ objects have been freed using the fast path because it was an
+ object from the cpu slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_frozen
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_frozen file is read-only and specifies how many
+ objects have been freed to a frozen slab (i.e. a remote cpu
+ slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_remove_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_remove_partial is read-only and specifies how
+ many times an object has been freed to a now-empty slab so
+ that it had to be removed from its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slab file is read-only and specifies how many times an
+ empty slab has been freed back to the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slowpath file is read-only and specifies how many
+ objects have been freed using the slow path (i.e. to a full or
+ partial slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/hwcache_align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The hwcache_align file is read-only and specifies whether
+ objects are aligned on cachelines.
+
+What: /sys/kernel/slab/cache/min_partial
+Date: February 2009
+KernelVersion: 2.6.30
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ David Rientjes <rientjes@google.com>
+Description:
+ The min_partial file specifies how many empty slabs shall
+ remain on a node's partial list to avoid the overhead of
+ allocating new slabs. Such slabs may be reclaimed by utilizing
+ the shrink file.
+
+What: /sys/kernel/slab/cache/object_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The object_size file is read-only and specifies the cache's
+ object size.
+
+What: /sys/kernel/slab/cache/objects
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects file is read-only and displays how many objects are
+ active and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/objects_partial
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects_partial file is read-only and displays how many
+ objects are on partial slabs and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/objs_per_slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file objs_per_slab is read-only and specifies how many
+ objects may be allocated from a single slab of the order
+ specified in /sys/kernel/slab/cache/order.
+
+What: /sys/kernel/slab/cache/order
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The order file specifies the page order at which new slabs are
+ allocated. It is writable and can be changed to increase the
+ number of objects per slab. If a slab cannot be allocated
+ because of fragmentation, SLUB will retry with the minimum order
+ possible depending on its characteristics.
+
+What: /sys/kernel/slab/cache/order_fallback
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file order_fallback is read-only and specifies how many
+ times an allocation of a new slab has not been possible at the
+ cache's order and instead fallen back to its minimum possible
+ order.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/partial
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The partial file is read-only and displays how long many
+ partial slabs there are and how long each node's list is.
+
+What: /sys/kernel/slab/cache/poison
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The poison file specifies whether objects should be poisoned
+ when a new slab is allocated.
+
+What: /sys/kernel/slab/cache/reclaim_account
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The reclaim_account file specifies whether the cache's objects
+ are reclaimable (and grouped by their mobility).
+
+What: /sys/kernel/slab/cache/red_zone
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The red_zone file specifies whether the cache's objects are red
+ zoned.
+
+What: /sys/kernel/slab/cache/remote_node_defrag_ratio
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file remote_node_defrag_ratio specifies the percentage of
+ times SLUB will attempt to refill the cpu slab with a partial
+ slab from a remote node as opposed to allocating a new slab on
+ the local node. This reduces the amount of wasted memory over
+ the entire system but can be expensive.
+ Available when CONFIG_NUMA is enabled.
+
+What: /sys/kernel/slab/cache/sanity_checks
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The sanity_checks file specifies whether expensive checks
+ should be performed on free and, at minimum, enables double free
+ checks. Caches that enable sanity_checks cannot be merged with
+ caches that do not.
+
+What: /sys/kernel/slab/cache/shrink
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The shrink file is written when memory should be reclaimed from
+ a cache. Empty partial slabs are freed and the partial list is
+ sorted so the slabs with the fewest available objects are used
+ first.
+
+What: /sys/kernel/slab/cache/slab_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slab_size file is read-only and specifies the object size
+ with metadata (debugging information and alignment) in bytes.
+
+What: /sys/kernel/slab/cache/slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slabs file is read-only and displays how long many slabs
+ there are (both cpu and partial) and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/store_user
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The store_user file specifies whether the location of
+ allocation or free should be tracked for a cache.
+
+What: /sys/kernel/slab/cache/total_objects
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The total_objects file is read-only and displays how many total
+ objects a cache has and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/trace
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The trace file specifies whether object allocations and frees
+ should be traced.
+
+What: /sys/kernel/slab/cache/validate
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ Writing to the validate file causes SLUB to traverse all of its
+ cache's objects and check the validity of metadata.
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
-UNDOCUMENTED:
/proc/sys/net/core/*
- dev_weight FIXME
+dev_weight - INTEGER
+ The maximum number of packets that kernel can handle on a NAPI
+ interrupt, it's a Per-CPU variable.
+
+ Default: 64
/proc/sys/net/unix/*
- max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+ The maximum length of dgram socket receive queue
+
+ Default: 10
+
+
+UNDOCUMENTED:
/proc/sys/net/irda/*
fast_poll_increase FIXME
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# Exectuable file formats
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
intr_type =
*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
- if (intr_type >= (1 << nr_irq))
- printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+ if (intr_type >= (1 << (nr_irq + 1)))
+ printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
#ifdef CONFIG_SELFMOD_INTC
selfmod_function((int *) arr_func, intc_baseaddr);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
* 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
*/
- pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+ pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
return -EFAULT;
}
- pr_debug(" %08x %08x", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
(int)((short)jmp[1]);
- pr_debug(" %x ", offset);
+ pr_devel(" %x ", offset);
/* get the address this jumps too */
tramp = mod->arch.toc + offset + 32;
- pr_debug("toc: %lx", tramp);
+ pr_devel("toc: %lx", tramp);
if (probe_kernel_read(jmp, (void *)tramp, 8)) {
printk(KERN_ERR "Failed to read %lx\n", tramp);
return -EFAULT;
}
- pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
- pr_debug("ip:%lx jumps to %lx", ip, tramp);
+ pr_devel("ip:%lx jumps to %lx", ip, tramp);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
return -EFAULT;
}
- pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
if (tramp & 0x8000)
tramp -= 0x10000;
- pr_debug(" %lx ", tramp);
+ pr_devel(" %lx ", tramp);
if (tramp != addr) {
printk(KERN_ERR
/* ld r2,40(r1) */
op[1] = 0xe8410028;
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
return -EPERM;
return -EINVAL;
}
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
return -EPERM;
PPC_LONG "2b,4b\n"
".previous"
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
*(.data.page_aligned)
}
+ . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
entry = do_dcache_icache_coherency(entry);
changed = !pte_same(*(ptep), entry);
if (changed) {
- assert_pte_locked(vma->vm_mm, address);
+ if (!(vma->vm_flags & VM_HUGETLB))
+ assert_pte_locked(vma->vm_mm, address);
__ptep_set_access_flags(ptep, entry);
flush_tlb_page_nohash(vma, address);
}
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_SPINLOCKS
+ bool "Paravirtualization layer for spinlocks"
+ depends on PARAVIRT && SMP && EXPERIMENTAL
+ ---help---
+ Paravirtualized spinlocks allow a pvops backend to replace the
+ spinlock implementation with something virtualization-friendly
+ (for example, block the virtual CPU rather than spinning).
+
+ Unfortunately the downside is an up to 5% performance hit on
+ native kernels, with various workloads.
+
+ If you are unsure how to answer this question, answer N.
+
config PARAVIRT_CLOCK
bool
default n
#define paravirt_nop ((void *)_paravirt_nop)
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
{
case 1: \
asm(op "b %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "qi" ((T__)(val))); \
break; \
case 2: \
asm(op "w %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 4: \
asm(op "l %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 8: \
asm(op "q %1,"__percpu_arg(0) \
: "+m" (var) \
- : "re" ((T__)val)); \
+ : "re" ((T__)(val))); \
break; \
default: __bad_percpu_size(); \
} \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
- : "=r" (ret__) \
+ : "=q" (ret__) \
: "m" (var)); \
break; \
case 2: \
/*
* X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. So regs will be the current sp.
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
*
* This is valid only for kernel mode traps.
*/
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
{
#ifdef CONFIG_X86_32
- return (unsigned long)regs;
+ return (unsigned long)(®s->sp);
#else
return regs->sp;
#endif
return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
}
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
{
__raw_spin_lock(lock);
}
-#endif
+#endif /* CONFIG_PARAVIRT_SPINLOCKS */
static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
{
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
}
#ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
{
struct acpi_table_header *header = NULL;
struct es7000_oem_table *table;
return 0;
}
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
{
if (!oem_addr)
return;
static int es7000_acpi_ret;
/* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
unsigned long oem_addr = 0;
int check_dsdt;
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
.name = "es7000",
.probe = probe_es7000,
}
printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
mtrr_state.enabled & 2 ? "en" : "dis");
- high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+ if (size_or_mask & 0xffffffffUL)
+ high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+ else
+ high_width = ffs(size_or_mask>>32) + 32 - 1;
+ high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
for (i = 0; i < num_var_ranges; ++i) {
if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n",
_ASM_EXTABLE(1b, 4b)
_ASM_EXTABLE(2b, 4b)
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
.pv_irq_ops = pv_irq_ops,
.pv_apic_ops = pv_apic_ops,
.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
.pv_lock_ops = pv_lock_ops,
+#endif
};
return *((void **)&tmpl + type);
}
x86_backtrace(struct pt_regs * const regs, unsigned int depth)
{
struct frame_head *head = (struct frame_head *)frame_pointer(regs);
- unsigned long stack = kernel_trap_sp(regs);
if (!user_mode_vm(regs)) {
+ unsigned long stack = kernel_stack_pointer(regs);
if (depth)
dump_trace(NULL, regs, (unsigned long *)stack, 0,
&backtrace_ops, &depth);
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
-obj-$(CONFIG_SMP) += smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
\ No newline at end of file
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
#include <linux/highmem.h>
#include <linux/debugfs.h>
#include <linux/bug.h>
+#include <linux/module.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_SMP
void xen_smp_init(void);
-void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
-void xen_uninit_lock_cpu(int cpu);
-
extern cpumask_var_t xen_cpu_initialized_map;
#else
static inline void xen_smp_init(void) {}
#endif
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+#else
+static inline void xen_init_spinlocks(void)
+{
+}
+static inline void xen_init_lock_cpu(int cpu)
+{
+}
+static inline void xen_uninit_lock_cpu(int cpu)
+{
+}
+#endif
/* Declare an asm function, along with symbols needed to make it
inlineable */
request_module(name);
- if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
+ CRYPTO_ALG_NEED_FALLBACK) &&
snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
request_module(tmp);
if (err)
goto out;
- eseqiv_complete2(req);
+ if (giv != req->giv)
+ eseqiv_complete2(req);
out:
return err;
spin_lock_irqsave(&blkif_io_lock, flags);
- del_gendisk(info->gd);
-
/* No more blkif_request(). */
blk_stop_queue(info->rq);
blk_cleanup_queue(info->rq);
info->rq = NULL;
+ del_gendisk(info->gd);
+
out:
xenbus_frontend_closed(dev);
}
break;
case XenbusStateClosing:
- if (info->gd == NULL)
- xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+ if (info->gd == NULL) {
+ xenbus_frontend_closed(dev);
+ break;
+ }
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
struct device_node *node = vdev->dev.archdata.of_node;
deviceno = vdev->unit_address;
- if (deviceno > VIOCD_MAX_CD)
+ if (deviceno >= VIOCD_MAX_CD)
return -ENODEV;
if (!node)
return -ENODEV;
int ret;
keyptr = get_keyptr();
- hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+ hash[0] += current->pid + jiffies + get_cycles();
ret = half_md4_transform(hash, keyptr->secret);
put_cpu_var(get_random_int_hash);
unsigned char * event_entry)
{
const char *name = "";
- char data[40] = "";
+ /* 41 so there is room for 40 data and 1 nul */
+ char data[41] = "";
int i, n_len = 0, d_len = 0;
struct tcpa_pc_event *pc_event;
static int init_ixp_crypto(void)
{
int ret = -ENODEV;
+ u32 msg[2] = { 0, 0 };
if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
return ret;
if (!npe_running(npe_c)) {
- npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ ret = npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ if (ret) {
+ return ret;
+ }
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+ } else {
+ if (npe_send_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
}
+ switch ((msg[1]>>16) & 0xff) {
+ case 3:
+ printk(KERN_WARNING "Firmware of %s lacks AES support\n",
+ npe_name(npe_c));
+ support_aes = 0;
+ break;
+ case 4:
+ case 5:
+ support_aes = 1;
+ break;
+ default:
+ printk(KERN_ERR "Firmware of %s lacks crypto support\n",
+ npe_name(npe_c));
+ return -ENODEV;
+ }
/* buffer_pool will also be used to sometimes store the hmac,
* so assure it is large enough
*/
qmgr_enable_irq(RECV_QID);
return 0;
+
+npe_error:
+ printk(KERN_ERR "%s not responding\n", npe_name(npe_c));
+ ret = -EIO;
err:
if (ctx_pool)
dma_pool_destroy(ctx_pool);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS("aes");
dev_dbg(pcf->dev, "pcf50633_irq\n");
get_device(pcf->dev);
- disable_irq(pcf->irq);
+ disable_irq_nosync(pcf->irq);
schedule_work(&pcf->irq_work);
return IRQ_HANDLED;
/* Cache is CPU endian */
dest[i - reg] = be16_to_cpu(dest[i - reg]);
- /* Satisfy non-volatile bits from cache */
- dest[i - reg] &= wm8350_reg_io_map[i].vol;
- dest[i - reg] |= wm8350->reg_cache[i];
-
/* Mask out non-readable bits */
dest[i - reg] &= wm8350_reg_io_map[i].readable;
}
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
| src[i - reg];
- /* Don't store volatile bits */
- wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
-
src[i - reg] = cpu_to_be16(src[i - reg]);
}
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
value = be16_to_cpu(wm8350->reg_cache[i]);
value &= wm8350_reg_io_map[i].readable;
- value &= ~wm8350_reg_io_map[i].vol;
wm8350->reg_cache[i] = value;
} else
wm8350->reg_cache[i] = reg_map[i];
/* Calculate flash page address; use block erase (for speed) if
* we're at a block boundary and need to erase the whole block.
*/
- pageaddr = div_u64(instr->len, priv->page_size);
+ pageaddr = div_u64(instr->addr, priv->page_size);
do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
pageaddr = pageaddr << priv->page_offset;
#define DRV_VER "2.0.348"
#define DRV_NAME "be2net"
#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC"
+#define OC_NAME "Emulex OneConnect 10Gbps NIC"
#define DRV_DESC BE_NAME "Driver"
+#define BE_VENDOR_ID 0x19a2
+#define BE_DEVICE_ID1 0x211
+#define OC_DEVICE_ID1 0x700
+#define OC_DEVICE_ID2 0x701
+
+static inline char *nic_name(struct pci_dev *pdev)
+{
+ if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+ return OC_NAME;
+ else
+ return BE_NAME;
+}
+
/* Number of bytes of an RX frame that are copied to skb->data */
#define BE_HDR_LEN 64
#define BE_MAX_JUMBO_FRAME_SIZE 9018
module_param(rx_frag_size, uint, S_IRUGO);
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
-#define BE_VENDOR_ID 0x19a2
-#define BE2_DEVICE_ID_1 0x0211
static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
- { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, be_dev_ids);
if (status != 0)
goto stats_clean;
- dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+ dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
return 0;
stats_clean:
disable_dev:
pci_disable_device(pdev);
do_none:
- dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+ dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
return status;
}
return best;
}
+static int agg_device_up(const struct aggregator *agg)
+{
+ return (netif_running(agg->slave->dev) &&
+ netif_carrier_ok(agg->slave->dev));
+}
+
/**
* ad_agg_selection_logic - select an aggregation group for a team
* @aggregator: the aggregator we're looking at
struct port *port;
origin = agg;
-
active = __get_active_agg(agg);
- best = active;
+ best = (active && agg_device_up(active)) ? active : NULL;
do {
agg->is_active = 0;
- if (agg->num_of_ports)
+ if (agg->num_of_ports && agg_device_up(agg))
best = ad_agg_selection_test(best, agg);
} while ((agg = __get_next_agg(agg)));
static int mdio_probe(struct meth_private *priv)
{
int i;
- unsigned long p2, p3;
+ unsigned long p2, p3, flags;
/* check if phy is detected already */
if(priv->phy_addr>=0&&priv->phy_addr<32)
return 0;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
for (i=0;i<32;++i){
priv->phy_addr=i;
p2=mdio_read(priv,2);
break;
}
}
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if(priv->phy_addr<32) {
return 0;
}
static void meth_rx(struct net_device* dev, unsigned long int_status)
{
struct sk_buff *skb;
- unsigned long status;
+ unsigned long status, flags;
struct meth_private *priv = netdev_priv(dev);
unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if (int_status & METH_INT_RX_UNDERFLOW) {
fifo_rptr = (fifo_rptr - 1) & 0x0f;
mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
ADVANCE_RX_PTR(priv->rx_write);
}
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* In case there was underflow, and Rx DMA was disabled */
priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
mace->eth.int_stat = METH_INT_RX_THRESHOLD;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static int meth_tx_full(struct net_device *dev)
static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
{
struct meth_private *priv = netdev_priv(dev);
- unsigned long status;
+ unsigned long status, flags;
struct sk_buff *skb;
unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* Stop DMA notification */
priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
}
mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static void meth_error(struct net_device* dev, unsigned status)
{
struct meth_private *priv = netdev_priv(dev);
+ unsigned long flags;
printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
/* check for errors too... */
printk(KERN_WARNING "meth: Rx overflow\n");
if (status & (METH_INT_RX_UNDERFLOW)) {
printk(KERN_WARNING "meth: Rx underflow\n");
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
/* more underflow interrupts will be delivered,
* effectively throwing us into an infinite loop.
priv->dma_ctrl &= ~METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
DPRINTK("Disabled meth Rx DMA temporarily\n");
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
mace->eth.int_stat = METH_INT_ERROR;
}
if (cq->is_tx)
del_timer(&cq->timer);
- else
+ else {
napi_disable(&cq->napi);
+ netif_napi_del(&cq->napi);
+ }
mlx4_cq_free(mdev->dev, &cq->mcq);
}
if (rxq->rx_curr_desc == rxq->rx_ring_size)
rxq->rx_curr_desc = 0;
- dma_unmap_single(NULL, rx_desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr,
rx_desc->buf_size, DMA_FROM_DEVICE);
rxq->rx_desc_count--;
rx++;
rx_desc = rxq->rx_desc_area + rx;
- rx_desc->buf_ptr = dma_map_single(NULL, skb->data,
- mp->skb_size, DMA_FROM_DEVICE);
+ rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
+ skb->data, mp->skb_size,
+ DMA_FROM_DEVICE);
rx_desc->buf_size = mp->skb_size;
rxq->rx_skb[rx] = skb;
wmb();
static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
int nr_frags = skb_shinfo(skb)->nr_frags;
int frag;
desc->l4i_chk = 0;
desc->byte_cnt = this_frag->size;
- desc->buf_ptr = dma_map_page(NULL, this_frag->page,
- this_frag->page_offset,
- this_frag->size,
- DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_page(mp->dev->dev.parent,
+ this_frag->page,
+ this_frag->page_offset,
+ this_frag->size, DMA_TO_DEVICE);
}
}
desc->l4i_chk = l4i_chk;
desc->byte_cnt = length;
- desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data,
+ length, DMA_TO_DEVICE);
__skb_queue_tail(&txq->tx_skb, skb);
}
if (cmd_sts & TX_FIRST_DESC) {
- dma_unmap_single(NULL, desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
} else {
- dma_unmap_page(NULL, desc->buf_ptr,
+ dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
}
mp->rx_desc_sram_size);
rxq->rx_desc_dma = mp->rx_desc_sram_addr;
} else {
- rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
- &rxq->rx_desc_dma,
- GFP_KERNEL);
+ rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &rxq->rx_desc_dma,
+ GFP_KERNEL);
}
if (rxq->rx_desc_area == NULL) {
if (index == 0 && size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, size,
+ dma_free_coherent(mp->dev->dev.parent, size,
rxq->rx_desc_area,
rxq->rx_desc_dma);
rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, rxq->rx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size,
rxq->rx_desc_area, rxq->rx_desc_dma);
kfree(rxq->rx_skb);
mp->tx_desc_sram_size);
txq->tx_desc_dma = mp->tx_desc_sram_addr;
} else {
- txq->tx_desc_area = dma_alloc_coherent(NULL, size,
- &txq->tx_desc_dma,
- GFP_KERNEL);
+ txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &txq->tx_desc_dma,
+ GFP_KERNEL);
}
if (txq->tx_desc_area == NULL) {
txq->tx_desc_area_size <= mp->tx_desc_sram_size)
iounmap(txq->tx_desc_area);
else
- dma_free_coherent(NULL, txq->tx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size,
txq->tx_desc_area, txq->tx_desc_dma);
}
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR|
- VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32),
+ VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32),
&vp_reg->kdfcctl_errors_mask);
__vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask);
roq_data = (struct i2400m_roq_data *) &skb->cb;
i2400m_net_erx(i2400m, skb, roq_data->cs);
}
- else {
+ else
__i2400m_roq_queue(i2400m, roq, skb, sn, nsn);
- __i2400m_roq_update_ws(i2400m, roq, sn + 1);
- }
+ __i2400m_roq_update_ws(i2400m, roq, sn + 1);
i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS,
old_ws, len, sn, nsn, roq->ws);
}
.owner = THIS_MODULE,
},
.probe = da903x_regulator_probe,
- .remove = da903x_regulator_remove,
+ .remove = __devexit_p(da903x_regulator_remove),
};
static int __init da903x_regulator_init(void)
remove_sysfs_attrs(port);
- /* all open ports are closed at this point
- * (by usbserial.c:__serial_close, which calls ftdi_close)
- */
-
- if (priv) {
- usb_set_serial_port_data(port, NULL);
- kref_put(&priv->kref, ftdi_sio_priv_release);
- }
+ kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
/* BB FIXME investigate remapping reserved chars here */
*symlinkinfo = cifs_strndup_from_ucs(data_start, count,
is_unicode, nls_codepage);
- if (!symlinkinfo)
+ if (!*symlinkinfo)
rc = -ENOMEM;
}
}
cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
{
struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
+ int rc = -ENOMEM;
int xid;
char *full_path = NULL;
- char *target_path = ERR_PTR(-ENOMEM);
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ char *target_path = NULL;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct cifsTconInfo *tcon = cifs_sb->tcon;
xid = GetXid();
- full_path = build_path_from_dentry(direntry);
+ /*
+ * For now, we just handle symlinks with unix extensions enabled.
+ * Eventually we should handle NTFS reparse points, and MacOS
+ * symlink support. For instance...
+ *
+ * rc = CIFSSMBQueryReparseLinkInfo(...)
+ *
+ * For now, just return -EACCES when the server doesn't support posix
+ * extensions. Note that we still allow querying symlinks when posix
+ * extensions are manually disabled. We could disable these as well
+ * but there doesn't seem to be any harm in allowing the client to
+ * read them.
+ */
+ if (!(tcon->ses->capabilities & CAP_UNIX)) {
+ rc = -EACCES;
+ goto out;
+ }
+ full_path = build_path_from_dentry(direntry);
if (!full_path)
goto out;
cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
-
- /* We could change this to:
- if (pTcon->unix_ext)
- but there does not seem any point in refusing to
- get symlink info if we can, even if unix extensions
- turned off for this mount */
-
- if (pTcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- &target_path,
- cifs_sb->local_nls);
- else {
- /* BB add read reparse point symlink code here */
- /* rc = CIFSSMBQueryReparseLinkInfo */
- /* BB Add code to Query ReparsePoint info */
- /* BB Add MAC style xsymlink check here if enabled */
- }
+ rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path,
+ cifs_sb->local_nls);
+ kfree(full_path);
+out:
if (rc != 0) {
kfree(target_path);
target_path = ERR_PTR(rc);
}
- kfree(full_path);
-out:
FreeXid(xid);
nd_set_link(nd, target_path);
return NULL;
case S_IFREG:
/* NFSv4 has atomic_open... */
if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
- && (mask & MAY_OPEN))
+ && (mask & MAY_OPEN)
+ && !(mask & MAY_EXEC))
goto out;
break;
case S_IFDIR:
static void reiserfs_kill_sb(struct super_block *s)
{
if (REISERFS_SB(s)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
if (REISERFS_SB(s)->xattr_root) {
d_invalidate(REISERFS_SB(s)->xattr_root);
dput(REISERFS_SB(s)->xattr_root);
REISERFS_SB(s)->xattr_root = NULL;
}
-#endif
if (REISERFS_SB(s)->priv_root) {
d_invalidate(REISERFS_SB(s)->priv_root);
dput(REISERFS_SB(s)->priv_root);
mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
xaroot = dget(REISERFS_SB(sb)->xattr_root);
- if (!xaroot->d_inode) {
+ if (!xaroot)
+ xaroot = ERR_PTR(-ENODATA);
+ else if (!xaroot->d_inode) {
int err = -ENODATA;
if (xattr_may_create(flags))
err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
return err;
}
-/* Actual operations that are exported to VFS-land */
-struct xattr_handler *reiserfs_xattr_handlers[] = {
- &reiserfs_xattr_user_handler,
- &reiserfs_xattr_trusted_handler,
-#ifdef CONFIG_REISERFS_FS_SECURITY
- &reiserfs_xattr_security_handler,
-#endif
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- &reiserfs_posix_acl_access_handler,
- &reiserfs_posix_acl_default_handler,
-#endif
- NULL
-};
-
/*
* In order to implement different sets of xattr operations for each xattr
* prefix with the generic xattr API, a filesystem should create a
return error;
}
-int reiserfs_permission(struct inode *inode, int mask)
-{
- /*
- * We don't do permission checks on the internal objects.
- * Permissions are determined by the "owning" object.
- */
- if (IS_PRIVATE(inode))
- return 0;
- /*
- * Stat data v1 doesn't support ACLs.
- */
- if (get_inode_sd_version(inode) == STAT_DATA_V1)
- return generic_permission(inode, mask, NULL);
- else
- return generic_permission(inode, mask, reiserfs_check_acl);
-}
-
static int create_privroot(struct dentry *dentry)
{
int err;
return 0;
}
+#else
+int __init reiserfs_xattr_register_handlers(void) { return 0; }
+void reiserfs_xattr_unregister_handlers(void) {}
+static int create_privroot(struct dentry *dentry) { return 0; }
+#endif
+
+/* Actual operations that are exported to VFS-land */
+struct xattr_handler *reiserfs_xattr_handlers[] = {
+#ifdef CONFIG_REISERFS_FS_XATTR
+ &reiserfs_xattr_user_handler,
+ &reiserfs_xattr_trusted_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_SECURITY
+ &reiserfs_xattr_security_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+ &reiserfs_posix_acl_access_handler,
+ &reiserfs_posix_acl_default_handler,
+#endif
+ NULL
+};
+
static int xattr_mount_check(struct super_block *s)
{
/* We need generation numbers to ensure that the oid mapping is correct
return 0;
}
-#else
-int __init reiserfs_xattr_register_handlers(void) { return 0; }
-void reiserfs_xattr_unregister_handlers(void) {}
+int reiserfs_permission(struct inode *inode, int mask)
+{
+ /*
+ * We don't do permission checks on the internal objects.
+ * Permissions are determined by the "owning" object.
+ */
+ if (IS_PRIVATE(inode))
+ return 0;
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+ /*
+ * Stat data v1 doesn't support ACLs.
+ */
+ if (get_inode_sd_version(inode) != STAT_DATA_V1)
+ return generic_permission(inode, mask, reiserfs_check_acl);
#endif
+ return generic_permission(inode, mask, NULL);
+}
/* This will catch lookups from the fs root to .reiserfs_priv */
static int
int err = 0;
struct dentry *privroot = REISERFS_SB(s)->priv_root;
-#ifdef CONFIG_REISERFS_FS_XATTR
err = xattr_mount_check(s);
if (err)
goto error;
clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt));
clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt));
}
-#endif
/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
if (reiserfs_posixacl(s))
s->s_flags |= MS_POSIXACL;
else
-#endif
s->s_flags &= ~MS_POSIXACL;
return err;
#define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
#define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
-#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
#define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
/* Non-atomic variants, ie. preemption disabled and won't be touched
int reiserfs_lookup_privroot(struct super_block *sb);
int reiserfs_delete_xattrs(struct inode *inode);
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
+int reiserfs_permission(struct inode *inode, int mask);
#ifdef CONFIG_REISERFS_FS_XATTR
#define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
const void *value, size_t size, int flags);
ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
int reiserfs_removexattr(struct dentry *dentry, const char *name);
-int reiserfs_permission(struct inode *inode, int mask);
int reiserfs_xattr_get(struct inode *, const char *, void *, size_t);
int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int);
#define reiserfs_listxattr NULL
#define reiserfs_removexattr NULL
-#define reiserfs_permission NULL
-
static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
{
}
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
*
* lock_page() might sleep, the caller should not hold a spinlock.
*/
-static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
+static int
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
}
again:
- err = get_user_pages_fast(address, 1, 0, &page);
+ err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
if (err < 0)
return err;
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out_put_key1;
int ret, drop_count = 0;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ);
if (unlikely(ret != 0))
goto out_put_key1;
q.bitset = bitset;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
q.pi_state = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
* table (if it's not there yet), and we check it for lock order
* conflicts and deadlocks.
*/
-#define MAX_LOCKDEP_ENTRIES 8192UL
+#define MAX_LOCKDEP_ENTRIES 16384UL
-#define MAX_LOCKDEP_CHAINS_BITS 14
+#define MAX_LOCKDEP_CHAINS_BITS 15
#define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS)
#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
local_irq_disable();
- sysdev_suspend(PMSG_FREEZE);
+ error = sysdev_suspend(PMSG_FREEZE);
if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down, "
+ printk(KERN_ERR "PM: Some system devices failed to power down, "
"aborting hibernation\n");
goto Enable_irqs;
}
*/
unsigned long long __attribute__((weak)) sched_clock(void)
{
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+ return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+ * (NSEC_PER_SEC / HZ);
}
static __read_mostly int sched_clock_running;
"# echo print-parent > /debug/tracing/trace_options\n"
"# echo 1 > /debug/tracing/tracing_enabled\n"
"# cat /debug/tracing/trace > /tmp/trace.txt\n"
- "echo 0 > /debug/tracing/tracing_enabled\n"
+ "# echo 0 > /debug/tracing/tracing_enabled\n"
;
static ssize_t
/*
* The interval between `kupdate'-style writebacks
*/
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
/*
* The longest time for which data is allowed to remain dirty
*/
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
/*
* Flag that makes the machine dump writes/reads and block dirtyings.
sync_supers();
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+ oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
start_jif = jiffies;
next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
nr_to_write = global_page_state(NR_FILE_DIRTY) +
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/module.h>
static void slob_free_pages(void *b, int order)
{
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += 1 << order;
free_pages((unsigned long)b, order);
}
spin_unlock_irqrestore(&slob_lock, flags);
clear_slob_page(sp);
free_slob_page(sp);
- free_page((unsigned long)b);
+ slob_free_pages(b, 0);
return;
}
*/
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/module.h>
#include <linux/bit_spinlock.h>
#include <linux/interrupt.h>
__ClearPageSlab(page);
reset_page_mapcount(page);
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += pages;
__free_pages(page, order);
}
* Doh this slab cannot be placed using slub_max_order.
*/
order = slab_order(size, 1, MAX_ORDER, 1);
- if (order <= MAX_ORDER)
+ if (order < MAX_ORDER)
return order;
return -ENOSYS;
}
static int __init setup_slub_max_order(char *str)
{
get_option(&str, &slub_max_order);
+ slub_max_order = min(slub_max_order, MAX_ORDER - 1);
return 1;
}
if (skb->protocol == htons(ETH_P_PAUSE))
goto drop;
+ /* If STP is turned off, then forward */
+ if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
+ goto forward;
+
if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
NULL, br_handle_local_finish))
return NULL; /* frame consumed by filter */
return skb; /* continue processing */
}
+forward:
switch (p->state) {
case BR_STATE_FORWARDING:
rhook = rcu_dereference(br_should_route_hook);
{
int isroot = br_is_root_bridge(br);
+ if (br->stp_enabled != BR_KERNEL_STP)
+ return;
+
pr_info("%s: topology change detected, %s\n", br->dev->name,
isroot ? "propagating" : "sending tcn bpdu");
NOTES.
- * The stored value for avbps is scaled by 2^5, so that maximal
- rate is ~1Gbit, avpps is scaled by 2^10.
-
+ * avbps is scaled by 2^5, avpps is scaled by 2^10.
+ * both values are reported as 32 bit unsigned values. bps can
+ overflow for fast links : max speed being 34360Mbit/sec
* Minimal interval is HZ/4=250msec (it is the greatest common divisor
for HZ=100 and HZ=1024 8)), maximal interval
is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
spinlock_t *stats_lock;
int ewma_log;
u64 last_bytes;
+ u64 avbps;
u32 last_packets;
u32 avpps;
- u32 avbps;
struct rcu_head e_rcu;
struct rb_node node;
};
rcu_read_lock();
list_for_each_entry_rcu(e, &elist[idx].list, list) {
u64 nbytes;
+ u64 brate;
u32 npackets;
u32 rate;
nbytes = e->bstats->bytes;
npackets = e->bstats->packets;
- rate = (nbytes - e->last_bytes)<<(7 - idx);
+ brate = (nbytes - e->last_bytes)<<(7 - idx);
e->last_bytes = nbytes;
- e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
+ e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
e->rate_est->bps = (e->avbps+0xF)>>5;
rate = (npackets - e->last_packets)<<(12 - idx);
void netpoll_poll(struct netpoll *np)
{
struct net_device *dev = np->dev;
- const struct net_device_ops *ops = dev->netdev_ops;
+ const struct net_device_ops *ops;
+
+ if (!dev || !netif_running(dev))
+ return;
- if (!dev || !netif_running(dev) || !ops->ndo_poll_controller)
+ ops = dev->netdev_ops;
+ if (!ops->ndo_poll_controller)
return;
/* Process pending work on NIC */
next_skb:
block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
- if (abs_offset < block_limit) {
+ if (abs_offset < block_limit && !st->frag_data) {
*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
return block_limit - abs_offset;
}
config INET_LRO
bool "Large Receive Offload (ipv4/tcp)"
-
+ default y
---help---
Support for Large Receive Offload (ipv4/tcp).
__be32 root_server_addr = NONE; /* Address of NFS server */
u8 root_server_path[256] = { 0, }; /* Path to mount as root */
+u32 ic_dev_xid; /* Device under configuration */
+
/* vendor class identifier */
static char vendor_class_identifier[253] __initdata;
goto drop_unlock;
}
+ /* Is it a reply for the device we are configuring? */
+ if (b->xid != ic_dev_xid) {
+ if (net_ratelimit())
+ printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n");
+ goto drop_unlock;
+ }
+
/* Parse extensions */
if (ext_len >= 4 &&
!memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
get_random_bytes(&timeout, sizeof(timeout));
timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM);
for (;;) {
+ /* Track the device we are configuring */
+ ic_dev_xid = d->xid;
+
#ifdef IPCONFIG_BOOTP
if (do_bootp && (d->able & IC_BOOTP))
ic_bootp_send_if(d, jiffies - start_jiffies);
struct task_struct *user_recv = NULL;
int copied_early = 0;
struct sk_buff *skb;
+ u32 urg_hole = 0;
lock_sock(sk);
}
}
}
- if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) {
+ if ((flags & MSG_PEEK) &&
+ (peek_seq - copied - urg_hole != tp->copied_seq)) {
if (net_ratelimit())
printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n",
current->comm, task_pid_nr(current));
if (!urg_offset) {
if (!sock_flag(sk, SOCK_URGINLINE)) {
++*seq;
+ urg_hole++;
offset++;
used--;
if (!used)
switch (teql_resolve(skb, skb_res, slave)) {
case 0:
if (__netif_tx_trylock(slave_txq)) {
+ unsigned int length = qdisc_pkt_len(skb);
+
if (!netif_tx_queue_stopped(slave_txq) &&
!netif_tx_queue_frozen(slave_txq) &&
slave_ops->ndo_start_xmit(skb, slave) == 0) {
master->slaves = NEXT_SLAVE(q);
netif_wake_queue(dev);
master->stats.tx_packets++;
- master->stats.tx_bytes +=
- qdisc_pkt_len(skb);
+ master->stats.tx_bytes += length;
return 0;
}
__netif_tx_unlock(slave_txq);
#!/bin/sh
-# Print additional version information for non-release trees.
+#
+# This scripts adds local version information from the version
+# control systems git, mercurial (hg) and subversion (svn).
+#
+# If something goes wrong, send a mail the kernel build mailinglist
+# (see MAINTAINERS) and CC Nico Schottelius
+# <nico-linuxsetlocalversion -at- schottelius.org>.
+#
+#
usage() {
echo "Usage: $0 [srctree]" >&2
# Check for git and a git repo.
if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # Do we have an untagged tag?
- if atag=`git describe 2>/dev/null`; then
- echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
- # add -g${head}, if there is no usable tag
- else
- printf '%s%s' -g $head
+
+ # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
+ # because this version is defined in the top level Makefile.
+ if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+ # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
+ # we pretty print it.
+ if atag="`git describe 2>/dev/null`"; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we don't have a tag at all we print -g{commitish}.
+ else
+ printf '%s%s' -g $head
+ fi
fi
# Is this git on svn?
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff