Staging: rtxx70: merge rt3070 with rt2870

* remove RT30xx ifdefs
* add -DRT3070 to rt2870's EXTRA_CFLAGS
* because of changes in the way that hardware is initialized/accessed
  rt3070 driver's firmware should be now also used by rt2870 driver
  (this is also done by newer out-of-tree vendor driver versions, i.e.
  2.1.0.0, historically in-kernel driver was based on 1.4.0.0 version)
* change RT28xx_CHIP_NAME to RTxx70
* update rt2870's help entry text
* add MODULE_ALIAS("rt3070sta") to rt2870
* update rt3070's dependencies

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c
index 0562397..9d589c2 100644 (file)
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -1419,17 +1419,6 @@ VOID     RTMPSetHT(
                pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0;
        }
 
-#ifndef RT30xx
-#ifdef RT2870
-       /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/
-       if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
-       {
-               pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0;
-               pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0;
-       }
-#endif // RT2870 //
-#endif
-
        if(pHTPhyMode->SHORTGI == GI_400)
        {
                pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1;

diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 9de5e24..61a2a4e 100644 (file)
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -5565,8 +5565,7 @@ VOID      AsicUpdateProtect(
        }
 }
 
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
+#ifdef RT2870
 /*
        ==========================================================================
        Description:
@@ -5721,8 +5720,7 @@ VOID RT30xxReverseRFSleepModeSetup(
                RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
        }
 }
-// end johnli
-#endif // RT30xx //
+#endif
 
 /*
        ==========================================================================
@@ -5764,9 +5762,7 @@ VOID AsicSwitchChannel(
 #ifdef RT2870
        // The RF programming sequence is difference between 3xxx and 2xxx
        if ((IS_RT3070(pAd) || IS_RT3090(pAd)) && (
-#ifdef RT30xx
             (pAd->RfIcType == RFIC_3022) || (pAd->RfIcType == RFIC_3021) ||
-#endif
             (pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020)))
        {
                /* modify by WY for Read RF Reg. error */
@@ -5789,7 +5785,6 @@ VOID AsicSwitchChannel(
                                RFValue = (RFValue & 0xE0) | TxPwer;
                                RT30xxWriteRFRegister(pAd, RF_R12, RFValue);
 
-#ifdef RT30xx
                                // Set Tx1 Power
                                RT30xxReadRFRegister(pAd, RF_R13, &RFValue);
                                RFValue = (RFValue & 0xE0) | TxPwer2;
@@ -5809,7 +5804,6 @@ VOID AsicSwitchChannel(
                                else if (pAd->Antenna.field.RxPath == 2)
                                        RFValue |= 0x40;
                                RT30xxWriteRFRegister(pAd, RF_R01, RFValue);
-#endif
 
                                // Set RF offset
                                RT30xxReadRFRegister(pAd, RF_R23, &RFValue);
@@ -5827,9 +5821,8 @@ VOID AsicSwitchChannel(
                                        RFValue = pAd->Mlme.CaliBW20RfR24;
                                }
                                RT30xxWriteRFRegister(pAd, RF_R24, RFValue);
-#ifdef RT30xx
                                RT30xxWriteRFRegister(pAd, RF_R31, RFValue);
-#endif
+
                                // Enable RF tuning
                                RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
                                RFValue = RFValue | 0x1;
@@ -5838,7 +5831,6 @@ VOID AsicSwitchChannel(
                                // latch channel for future usage.
                                pAd->LatchRfRegs.Channel = Channel;
 
-#ifdef RT30xx
                                DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
                                        Channel,
                                        pAd->RfIcType,
@@ -5848,8 +5840,6 @@ VOID AsicSwitchChannel(
                                        FreqItems3020[index].N,
                                        FreqItems3020[index].K,
                                        FreqItems3020[index].R));
-#endif
-
                                break;
                        }
                }
@@ -6828,13 +6818,13 @@ VOID AsicSetEdcaParm(
                                Ac2Cfg.field.AcTxop = 5;
                        }
 
-#ifdef RT30xx
+#ifdef RT2870
                        if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
                        {
                                // Tuning for WiFi WMM S3-T07: connexant legacy sta ==> broadcom 11n sta.
                                Ac2Cfg.field.Aifsn = 5;
                        }
-#endif // RT30xx //
+#endif
                }
 
                Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
@@ -6915,11 +6905,10 @@ VOID AsicSetEdcaParm(
                }
 
                AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#ifdef RT30xx
+#ifdef RT2870
                if (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
                        AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
-#endif // RT30xx //
-
+#endif
                RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
                NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -8493,12 +8482,7 @@ VOID AsicStaBbpTuning(
 #ifdef RT2870
                        // RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
                        // Otherwise, it will have some throughput side effect when low RSSI
-#ifndef RT30xx
-                       if (IS_RT3070(pAd))
-#endif
-#ifdef RT30xx
                        if (IS_RT30xx(pAd))
-#endif
                        {
                                if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
                                {

diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index e6a43b6..e7d1ed1 100644 (file)
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -38,16 +38,12 @@
     Jan Lee  2006-09-15    RT2860. Change for 802.11n , EEPROM, Led, BA, HT.
 */
 #include "../rt_config.h"
-#ifndef RT30xx
 #ifdef RT2860
 #include "firmware.h"
 #include <linux/bitrev.h>
 #endif
 #ifdef RT2870
-#include "../../rt2870/common/firmware.h"
-#endif
-#endif
-#ifdef RT30xx
+/* New firmware handles both RT2870 and RT3070. */
 #include "../../rt3070/firmware.h"
 #endif
 
@@ -147,12 +143,7 @@ REG_PAIR   RT30xx_RFRegTable[] = {
         {RF_R06,          0x02},
         {RF_R07,          0x70},
         {RF_R09,          0x0F},
-#ifndef RT30xx
-        {RF_R10,          0x71},
-#endif
-#ifdef RT30xx
         {RF_R10,          0x41},
-#endif
         {RF_R11,          0x21},
         {RF_R12,          0x7B},
         {RF_R14,          0x90},
@@ -165,9 +156,6 @@ REG_PAIR   RT30xx_RFRegTable[] = {
         {RF_R21,          0xDB},
         {RF_R24,          0x16},
         {RF_R25,          0x01},
-#ifndef RT30xx
-        {RF_R27,          0x03},
-#endif
         {RF_R29,          0x1F},
 };
 #define        NUM_RF_REG_PARMS        (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR))
@@ -1107,7 +1095,7 @@ VOID RTMPFilterCalibration(
        UCHAR   RF_R24_Value = 0;
 
        // Give bbp filter initial value
-#ifndef RT30xx
+#ifndef RT2870
        pAd->Mlme.CaliBW20RfR24 = 0x16;
        pAd->Mlme.CaliBW40RfR24 = 0x36;  //Bit[5] must be 1 for BW 40
 #else
@@ -1131,7 +1119,7 @@ VOID RTMPFilterCalibration(
                        BBPValue&= (~0x18);
                        BBPValue|= (0x10);
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-#ifdef RT30xx
+#ifdef RT2870
                        // set to BW40
                        RT30xxReadRFRegister(pAd, RF_R31, &value);
                        value |= 0x20;
@@ -1147,7 +1135,7 @@ VOID RTMPFilterCalibration(
                                FilterTarget = 0x13;
                        else
                                FilterTarget = 0x16;
-#ifdef RT30xx
+#ifdef RT2870
                        // set to BW20
                        RT30xxReadRFRegister(pAd, RF_R31, &value);
                        value &= (~0x20);
@@ -1263,20 +1251,13 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
        INT i;
        // Driver must read EEPROM to get RfIcType before initial RF registers
        // Initialize RF register to default value
-       if (IS_RT3070(pAd)
-#ifdef RT30xx
-           || IS_RT3071(pAd)
-#else
-           && (pAd->RfIcType == RFIC_3020 || pAd->RfIcType == RFIC_2020)
-#endif
-          )
+       if (IS_RT3070(pAd) || IS_RT3071(pAd))
        {
                // Init RF calibration
                // Driver should toggle RF R30 bit7 before init RF registers
                UINT32 RfReg = 0;
-#ifdef RT30xx
                UINT32 data;
-#endif
+
                RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg);
                RfReg |= 0x80;
                RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg);
@@ -1290,7 +1271,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
                        RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value);
                }
 
-#ifdef RT30xx
                if (IS_RT3070(pAd))
                {
                        //  Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate
@@ -1328,10 +1308,10 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
                        data &= ~(0x20);
                        RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data);
                }
-#endif
+
                //For RF filter Calibration
                RTMPFilterCalibration(pAd);
-#ifdef RT30xx
+
                // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration()
                if ((pAd->MACVersion & 0xffff) < 0x0211)
                        RT30xxWriteRFRegister(pAd, RF_R27, 0x3);
@@ -1346,7 +1326,6 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
                        // add by johnli, RF power sequence setup, load RF normal operation-mode setup
                        RT30xxLoadRFNormalModeSetup(pAd);
                }
-#endif
        }
 }
 #endif // RT2870 //
@@ -1567,9 +1546,6 @@ VOID      NICReadEEPROMParameters(
        NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
        {
-#ifndef RT30xx
-               NicConfig2.word = 0;
-#endif
                if ((NicConfig2.word & 0x00ff) == 0xff)
                {
                        NicConfig2.word &= 0xff00;
@@ -1806,10 +1782,9 @@ VOID     NICInitAsicFromEEPROM(
                }
        }
 
-#ifndef RT30xx
+#ifndef RT2870
        Antenna.word = pAd->Antenna.word;
-#endif
-#ifdef RT30xx
+#else
        Antenna.word = pAd->EEPROMDefaultValue[0];
        if (Antenna.word == 0xFFFF)
        {
@@ -1820,7 +1795,7 @@ VOID      NICInitAsicFromEEPROM(
        pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath;
        pAd->RfIcType = (UCHAR) Antenna.field.RfIcType;
 
-#ifdef RT30xx
+#ifdef RT2870
        DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath));
 
        // Save the antenna for future use
@@ -1828,7 +1803,7 @@ VOID      NICInitAsicFromEEPROM(
 #endif
        NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-#ifdef RT30xx
+#ifdef RT2870
        {
                if ((NicConfig2.word & 0x00ff) == 0xff)
                {
@@ -1844,7 +1819,7 @@ VOID      NICInitAsicFromEEPROM(
        // Save the antenna for future use
        pAd->NicConfig2.word = NicConfig2.word;
 
-#ifdef RT30xx
+#ifdef RT2870
        // set default antenna as main
        if (pAd->RfIcType == RFIC_3020)
                AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
@@ -2251,21 +2226,8 @@ NDIS_STATUS      NICInitializeAsic(
 #endif // RT3070 //
                RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value);
        }
-
-#ifndef RT30xx
-       if(IS_RT3070(pAd))
-       {
-               // According to Frank Hsu (from Gary Tsao)
-               RTMP_IO_WRITE32(pAd, (USHORT)TX_SW_CFG0, 0x00000400);
-
-               // Initialize RT3070 serial MAC registers which is different from RT2870 serial
-               RTUSBWriteMACRegister(pAd, TX_SW_CFG1, 0);
-               RTUSBWriteMACRegister(pAd, TX_SW_CFG2, 0);
-       }
-#endif
 #endif // RT2870 //
 
-
        {
                for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
                {
@@ -2300,7 +2262,7 @@ NDIS_STATUS       NICInitializeAsic(
                        RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
                }
        }
-#ifdef RT30xx
+#ifdef RT2870
        else if (IS_RT3070(pAd))
        {
                RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
@@ -2347,22 +2309,11 @@ NDIS_STATUS     NICInitializeAsic(
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value);
        }
 
-#ifndef RT30xx
+#ifndef RT2870
        // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
        if ((pAd->MACVersion&0xffff) != 0x0101)
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);
-
-#ifdef RT2870
-       //write RT3070 BBP wchich different with 2870 after write RT2870 BBP
-       if (IS_RT3070(pAd))
-       {
-               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0a);
-               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x99);
-               RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R105, 0x05);
-       }
-#endif // RT2870 //
-#endif
-#ifdef RT30xx
+#else
        // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
        // RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
        if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd)))

diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index b4111e5..7f44414 100644 (file)
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -522,7 +522,7 @@ static int rt28xx_init(IN struct net_device *net_dev)
        AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
        AsicLockChannel(pAd, pAd->CommonCfg.Channel);
 
-#ifndef RT30xx
+#ifndef RT2870
        // 8051 firmware require the signal during booting time.
        AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
 #endif

diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index 8c17379..3f498f6 100644 (file)
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -391,14 +391,14 @@ typedef struct  _QUEUE_HEADER   {
     (_idx) = (_idx+1) % (_RingSize);       \
 }
 
-#ifdef RT30xx
+#ifdef RT2870
 // We will have a cost down version which mac version is 0x3090xxxx
 #define IS_RT3090(_pAd)                                ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
 #else
 #define IS_RT3090(_pAd)                                0
 #endif
 #define IS_RT3070(_pAd)                                (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
-#ifdef RT30xx
+#ifdef RT2870
 #define IS_RT3071(_pAd)                                (((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
 #define IS_RT30xx(_pAd)                                (((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
 #endif

diff --git a/drivers/staging/rt2870/2870_main_dev.c b/drivers/staging/rt2870/2870_main_dev.c
index b725c75..d0ed48b 100644 (file)
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -50,6 +50,7 @@ MODULE_LICENSE("GPL");
 #ifdef MODULE_VERSION
 MODULE_VERSION(STA_DRIVER_VERSION);
 #endif
+MODULE_ALIAS("rt3070sta");
 
 /* Kernel thread and vars, which handles packets that are completed. Only
  * packets that have a "complete" function are sent here. This way, the
@@ -65,19 +66,15 @@ struct usb_device_id rtusb_usb_id[] = {
        { USB_DEVICE(0x1737, 0x0070) }, /* Linksys */
        { USB_DEVICE(0x148F, 0x2870) }, /* Ralink */
        { USB_DEVICE(0x148F, 0x3070) }, /* Ralink 3070 */
-#ifdef RT30xx
        { USB_DEVICE(0x148F, 0x3071) }, /* Ralink 3071 */
        { USB_DEVICE(0x148F, 0x3072) }, /* Ralink 3072 */
-#endif
        { USB_DEVICE(0x0B05, 0x1731) }, /* Asus */
        { USB_DEVICE(0x0B05, 0x1732) }, /* Asus */
        { USB_DEVICE(0x0B05, 0x1742) }, /* Asus */
        { USB_DEVICE(0x0DF6, 0x0017) }, /* Sitecom */
        { USB_DEVICE(0x0DF6, 0x002B) }, /* Sitecom */
        { USB_DEVICE(0x0DF6, 0x002C) }, /* Sitecom */
-#ifdef RT30xx
        { USB_DEVICE(0x0DF6, 0x003E) }, /* Sitecom 3070 */
-#endif
        { USB_DEVICE(0x0DF6, 0x002D) }, /* Sitecom */
        { USB_DEVICE(0x0DF6, 0x0039) }, /* Sitecom 2770 */
        { USB_DEVICE(0x0DF6, 0x003F) }, /* Sitecom WL-608 */
@@ -88,10 +85,8 @@ struct usb_device_id rtusb_usb_id[] = {
        { USB_DEVICE(0x2019, 0xAB25) }, /* Planex Communications, Inc. RT3070 */
        { USB_DEVICE(0x07D1, 0x3C09) }, /* D-Link */
        { USB_DEVICE(0x07D1, 0x3C11) }, /* D-Link */
-#ifdef RT30xx
        { USB_DEVICE(0x2001, 0x3C09) }, /* D-Link */
        { USB_DEVICE(0x2001, 0x3C0A) }, /* D-Link 3072*/
-#endif
        { USB_DEVICE(0x14B2, 0x3C07) }, /* AL */
        { USB_DEVICE(0x14B2, 0x3C12) }, /* AL 3070 */
        { USB_DEVICE(0x050D, 0x8053) }, /* Belkin */
@@ -104,34 +99,24 @@ struct usb_device_id rtusb_usb_id[] = {
        { USB_DEVICE(0x07AA, 0x003F) }, /* Corega */
        { USB_DEVICE(0x18C5, 0x0012) }, /* Corega 3070 */
        { USB_DEVICE(0x1044, 0x800B) }, /* Gigabyte */
-#ifdef RT30xx
        { USB_DEVICE(0x1044, 0x800D) }, /* Gigabyte GN-WB32L 3070 */
-#endif
        { USB_DEVICE(0x15A9, 0x0006) }, /* Sparklan */
        { USB_DEVICE(0x083A, 0xB522) }, /* SMC */
        { USB_DEVICE(0x083A, 0xA618) }, /* SMC */
-#ifdef RT30xx
        { USB_DEVICE(0x083A, 0x8522) }, /* Arcadyan */
        { USB_DEVICE(0x083A, 0x7512) }, /* Arcadyan 2770 */
-#endif
        { USB_DEVICE(0x083A, 0x7522) }, /* Arcadyan */
-#ifdef RT30xx
        { USB_DEVICE(0x083A, 0x7511) }, /* Arcadyan 3070 */
-#endif
        { USB_DEVICE(0x0CDE, 0x0022) }, /* ZCOM */
        { USB_DEVICE(0x0586, 0x3416) }, /* Zyxel */
        { USB_DEVICE(0x0CDE, 0x0025) }, /* Zyxel */
        { USB_DEVICE(0x1740, 0x9701) }, /* EnGenius */
        { USB_DEVICE(0x1740, 0x9702) }, /* EnGenius */
-#ifdef RT30xx
        { USB_DEVICE(0x1740, 0x9703) }, /* EnGenius 3070 */
-#endif
        { USB_DEVICE(0x0471, 0x200f) }, /* Philips */
        { USB_DEVICE(0x14B2, 0x3C25) }, /* Draytek */
        { USB_DEVICE(0x13D3, 0x3247) }, /* AzureWave */
-#ifdef RT30xx
        { USB_DEVICE(0x13D3, 0x3273) }, /* AzureWave 3070*/
-#endif
        { USB_DEVICE(0x083A, 0x6618) }, /* Accton */
        { USB_DEVICE(0x15c5, 0x0008) }, /* Amit */
        { USB_DEVICE(0x0E66, 0x0001) }, /* Hawking */
@@ -146,23 +131,17 @@ struct usb_device_id rtusb_usb_id[] = {
        { USB_DEVICE(0x07B8, 0x3071) }, /* AboCom 3071 */
        { USB_DEVICE(0x07B8, 0x2870) }, /* AboCom */
        { USB_DEVICE(0x07B8, 0x2770) }, /* AboCom */
-#ifdef RT30xx
        { USB_DEVICE(0x07B8, 0x3072) }, /* Abocom 3072 */
-#endif
        { USB_DEVICE(0x7392, 0x7711) }, /* Edimax 3070 */
        { USB_DEVICE(0x5A57, 0x0280) }, /* Zinwell */
        { USB_DEVICE(0x5A57, 0x0282) }, /* Zinwell */
-#ifdef RT30xx
        { USB_DEVICE(0x1A32, 0x0304) }, /* Quanta 3070 */
-#endif
        { USB_DEVICE(0x0789, 0x0162) }, /* Logitec 2870 */
        { USB_DEVICE(0x0789, 0x0163) }, /* Logitec 2870 */
        { USB_DEVICE(0x0789, 0x0164) }, /* Logitec 2870 */
        { USB_DEVICE(0x7392, 0x7717) }, /* Edimax */
-#ifdef RT30xx
        { USB_DEVICE(0x1EDA, 0x2310) }, /* AirTies 3070 */
        { USB_DEVICE(0x1737, 0x0077) }, /* Linksys WUSB54GC-EU v3 */
-#endif
        { } /* Terminating entry */
 };
 

diff --git a/drivers/staging/rt2870/Kconfig b/drivers/staging/rt2870/Kconfig
index 8398d97..76841f6 100644 (file)
--- a/drivers/staging/rt2870/Kconfig
+++ b/drivers/staging/rt2870/Kconfig
@@ -1,6 +1,5 @@
 config RT2870
-       tristate "Ralink 2870 wireless support"
+       tristate "Ralink 2870/3070 wireless support"
        depends on USB && X86 && WLAN_80211
        ---help---
-         This is an experimental driver for the Ralink 2870 wireless chip.
-
+         This is an experimental driver for the Ralink xx70 wireless chips.

diff --git a/drivers/staging/rt2870/Makefile b/drivers/staging/rt2870/Makefile
index 3c17921..306c331 100644 (file)
--- a/drivers/staging/rt2870/Makefile
+++ b/drivers/staging/rt2870/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_RT2870)    += rt2870sta.o
 
 # TODO: all of these should be removed
 EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
-EXTRA_CFLAGS += -DRT2870
+EXTRA_CFLAGS += -DRT2870 -DRT3070
 EXTRA_CFLAGS += -DDBG
 
 rt2870sta-objs :=              \

diff --git a/drivers/staging/rt2870/common/cmm_data_2870.c b/drivers/staging/rt2870/common/cmm_data_2870.c
index d6fc056..3b63a48 100644 (file)
--- a/drivers/staging/rt2870/common/cmm_data_2870.c
+++ b/drivers/staging/rt2870/common/cmm_data_2870.c
@@ -810,12 +810,7 @@ VOID RT28xxUsbStaAsicForceWakeup(
        AutoWakeupCfg.word = 0;
        RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
 
-#ifndef RT30xx
-       AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
-#endif
-#ifdef RT30xx
        AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
-#endif
 
        OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
 }
@@ -852,12 +847,7 @@ VOID RT28xxUsbMlmeRadioOn(
        if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
                return;
 
-#ifndef RT30xx
-       AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
-#endif
-#ifdef RT30xx
        AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x02);
-#endif
                RTMPusecDelay(10000);
 
        NICResetFromError(pAd);
@@ -908,22 +898,6 @@ VOID RT28xxUsbMlmeRadioOFF(
                BssTableInit(&pAd->ScanTab);
        }
 
-#ifndef RT30xx
-       // Disable MAC Tx/Rx
-       RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-       Value &= (0xfffffff3);
-       RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-
-       // MAC_SYS_CTRL => value = 0x0 => 40mA
-       RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0);
-
-       // PWR_PIN_CFG => value = 0x0 => 40mA
-       RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0);
-
-       // TX_PIN_CFG => value = 0x0 => 20mA
-       RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
-#endif
-
        if (pAd->CommonCfg.BBPCurrentBW == BW_40)
        {
                // Must using 40MHz.
@@ -935,13 +909,11 @@ VOID RT28xxUsbMlmeRadioOFF(
                AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
        }
 
-#ifdef RT30xx
        // Disable Tx/Rx DMA
        RTUSBReadMACRegister(pAd, WPDMA_GLO_CFG, &GloCfg.word);    // disable DMA
        GloCfg.field.EnableTxDMA = 0;
        GloCfg.field.EnableRxDMA = 0;
        RTUSBWriteMACRegister(pAd, WPDMA_GLO_CFG, GloCfg.word);    // abort all TX rings
-#endif
 
        // Waiting for DMA idle
        i = 0;
@@ -954,12 +926,10 @@ VOID RT28xxUsbMlmeRadioOFF(
                RTMPusecDelay(1000);
        }while (i++ < 100);
 
-#ifdef RT30xx
        // Disable MAC Tx/Rx
        RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
        Value &= (0xfffffff3);
        RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-#endif
 
        AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
 }

diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index 94a3c5e..1d69590 100644 (file)
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -110,11 +110,9 @@ NTSTATUS RTUSBFirmwareWrite(
        Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
        Status = RTUSBFirmwareRun(pAd);
 
-#ifdef RT30xx
        RTMPusecDelay(10000);
        RTUSBWriteMACRegister(pAd,H2M_MAILBOX_CSR,0);
        AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00);//reset rf by MCU supported by new firmware
-#endif
 
        return Status;
 }

diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 131f332..4c67baf 100644 (file)
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -349,11 +349,8 @@ extern UCHAR EpToQueue[6];
        {       RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL);       \
                RTUSBKickBulkOut(pAd); }
 
-#ifdef RT30xx
-#define RT28xx_CHIP_NAME            "RT3070"
-#else
-#define RT28xx_CHIP_NAME            "RT2870"
-#endif
+#define RT28xx_CHIP_NAME            "RTxx70"
+
 #define USB_CYC_CFG                 0x02a4
 #define STATUS_SUCCESS                         0x00
 #define STATUS_UNSUCCESSFUL            0x01
@@ -462,9 +459,7 @@ typedef struct   _RT_SET_ASIC_WCID {
        ULONG WCID;          // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
        ULONG SetTid;        // time-based: seconds, packet-based: kilo-packets
        ULONG DeleteTid;        // time-based: seconds, packet-based: kilo-packets
-#ifndef RT30xx
        UCHAR Addr[MAC_ADDR_LEN];       // avoid in interrupt when write key
-#endif
 } RT_SET_ASIC_WCID,*PRT_SET_ASIC_WCID;
 
 typedef struct   _RT_SET_ASIC_WCID_ATTRI {

diff --git a/drivers/staging/rt3070/Kconfig b/drivers/staging/rt3070/Kconfig
index b37fb5d..652d825 100644 (file)
--- a/drivers/staging/rt3070/Kconfig
+++ b/drivers/staging/rt3070/Kconfig
@@ -1,6 +1,6 @@
 config RT3070
        tristate "Ralink 3070 wireless support"
-       depends on USB && X86 && WLAN_80211
+       depends on USB && X86 && WLAN_80211 && !RT2870
        ---help---
          This is an experimental driver for the Ralink 3070 wireless chip.