sdhci: make sure to clear the error interrupt

The controller has a bit indicating that one of the higher bits (the
error bits) are set. A previous bug caused this bit to be masked, but
since that bug has been fixed we have to clear it explicictly.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 10d15c3..4a24db0 100644 (file)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1024,6 +1024,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 
        intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
 
+       intmask &= ~SDHCI_INT_ERROR;
+
        if (intmask & SDHCI_INT_BUS_POWER) {
                printk(KERN_ERR "%s: Card is consuming too much power!\n",
                        mmc_hostname(host->mmc));

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7400f4b..a6c8704 100644 (file)
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -107,6 +107,7 @@
 #define  SDHCI_INT_CARD_INSERT 0x00000040
 #define  SDHCI_INT_CARD_REMOVE 0x00000080
 #define  SDHCI_INT_CARD_INT    0x00000100
+#define  SDHCI_INT_ERROR       0x00008000
 #define  SDHCI_INT_TIMEOUT     0x00010000
 #define  SDHCI_INT_CRC         0x00020000
 #define  SDHCI_INT_END_BIT     0x00040000