V4L/DVB (9548): gspca: Fix Kconfig CodingStyle

Signed-off-by: Frederic Cand <frederic.cand@anevia.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index cfe0324..6b557c0 100644 (file)
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -3,16 +3,16 @@ menuconfig USB_GSPCA
        depends on VIDEO_V4L2
        default m
        ---help---
-       Say Y here if you want to enable selecting webcams based
-       on the GSPCA framework.
+         Say Y here if you want to enable selecting webcams based
+         on the GSPCA framework.
 
-       See <file:Documentation/video4linux/gspca.txt> for more info.
+         See <file:Documentation/video4linux/gspca.txt> for more info.
 
-       This driver uses the Video For Linux API. You must say Y or M to
-       "Video For Linux" to use this driver.
+         This driver uses the Video For Linux API. You must say Y or M to
+         "Video For Linux" to use this driver.
 
-       To compile this driver as modules, choose M here: the
-       modules will be called gspca_main.
+         To compile this driver as modules, choose M here: the
+         modules will be called gspca_main.
 
 
 if USB_GSPCA && VIDEO_V4L2
@@ -23,190 +23,190 @@ config USB_GSPCA_CONEX
        tristate "Conexant Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the Conexant chip.
+         Say Y here if you want support for cameras based on the Conexant chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_conex.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_conex.
 
 config USB_GSPCA_ETOMS
        tristate "Etoms USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the Etoms chip.
+         Say Y here if you want support for cameras based on the Etoms chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_etoms.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_etoms.
 
 config USB_GSPCA_FINEPIX
        tristate "Fujifilm FinePix USB V4L2 driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the FinePix chip.
+         Say Y here if you want support for cameras based on the FinePix chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_finepix.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_finepix.
 
 config USB_GSPCA_MARS
        tristate "Mars USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the Mars chip.
+         Say Y here if you want support for cameras based on the Mars chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_mars.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_mars.
 
 config USB_GSPCA_OV519
        tristate "OV519 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the OV519 chip.
+         Say Y here if you want support for cameras based on the OV519 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_ov519.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_ov519.
 
 config USB_GSPCA_PAC207
        tristate "Pixart PAC207 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the PAC207 chip.
+         Say Y here if you want support for cameras based on the PAC207 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_pac207.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_pac207.
 
 config USB_GSPCA_PAC7311
        tristate "Pixart PAC7311 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the PAC7311 chip.
+         Say Y here if you want support for cameras based on the PAC7311 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_pac7311.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_pac7311.
 
 config USB_GSPCA_SONIXB
        tristate "SN9C102 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SONIXB chip.
+         Say Y here if you want support for cameras based on the SONIXB chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_sonixb.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_sonixb.
 
 config USB_GSPCA_SONIXJ
        tristate "SONIX JPEG USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SONIXJ chip.
+         Say Y here if you want support for cameras based on the SONIXJ chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_sonixj
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_sonixj
 
 config USB_GSPCA_SPCA500
        tristate "SPCA500 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA500 chip.
+         Say Y here if you want support for cameras based on the SPCA500 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca500.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca500.
 
 config USB_GSPCA_SPCA501
        tristate "SPCA501 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA501 chip.
+         Say Y here if you want support for cameras based on the SPCA501 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca501.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca501.
 
 config USB_GSPCA_SPCA505
        tristate "SPCA505 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA505 chip.
+         Say Y here if you want support for cameras based on the SPCA505 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca505.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca505.
 
 config USB_GSPCA_SPCA506
        tristate "SPCA506 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA506 chip.
+         Say Y here if you want support for cameras based on the SPCA506 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca506.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca506.
 
 config USB_GSPCA_SPCA508
        tristate "SPCA508 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA508 chip.
+         Say Y here if you want support for cameras based on the SPCA508 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca508.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca508.
 
 config USB_GSPCA_SPCA561
        tristate "SPCA561 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the SPCA561 chip.
+         Say Y here if you want support for cameras based on the SPCA561 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca561.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca561.
 
 config USB_GSPCA_STK014
        tristate "Syntek DV4000 (STK014) USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the STK014 chip.
+         Say Y here if you want support for cameras based on the STK014 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_stk014.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_stk014.
 
 config USB_GSPCA_SUNPLUS
        tristate "SUNPLUS USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the Sunplus
-       SPCA504(abc) SPCA533 SPCA536 chips.
+         Say Y here if you want support for cameras based on the Sunplus
+         SPCA504(abc) SPCA533 SPCA536 chips.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_spca5xx.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_spca5xx.
 
 config USB_GSPCA_T613
        tristate "T613 (JPEG Compliance) USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the T613 chip.
+         Say Y here if you want support for cameras based on the T613 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_t613.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_t613.
 
 config USB_GSPCA_TV8532
        tristate "TV8532 USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the TV8531 chip.
+         Say Y here if you want support for cameras based on the TV8531 chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_tv8532.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_tv8532.
 
 config USB_GSPCA_VC032X
        tristate "VC032X USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the VC032X chip.
+         Say Y here if you want support for cameras based on the VC032X chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_vc032x.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_vc032x.
 
 config USB_GSPCA_ZC3XX
        tristate "ZC3XX USB Camera Driver"
        depends on VIDEO_V4L2 && USB_GSPCA
        help
-       Say Y here if you want support for cameras based on the ZC3XX chip.
+         Say Y here if you want support for cameras based on the ZC3XX chip.
 
-       To compile this driver as a module, choose M here: the
-       module will be called gspca_zc3xx.
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_zc3xx.
 
 endif