Staging: et131x: attack the config stuff
authorAlan Cox <alan@linux.intel.com>
Thu, 27 Aug 2009 10:00:06 +0000 (11:00 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 15 Sep 2009 19:02:27 +0000 (12:02 -0700)
Prune this back as most of it isn't relevant or used

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/et131x/et131x_adapter.h
drivers/staging/et131x/et131x_config.c
drivers/staging/et131x/et131x_initpci.c

index bbbada0..63d7c8a 100644 (file)
@@ -256,8 +256,6 @@ struct et131x_adapter {
        u8 RegistryPhyComa;     /* Phy Coma mode enable/disable */
 
        u32 RegistryRxMemEnd;   /* Size of internal rx memory */
-       u8 RegistryMACStat;     /* If set, read MACSTAT, else don't */
-       u32 RegistryVlanTag;    /* 802.1q Vlan TAG */
        u32 RegistryJumboPacket;        /* Max supported ethernet packet size */
 
        /* Validation helpers */
index a31f82a..358e6f6 100644 (file)
@@ -105,22 +105,10 @@ extern dbg_info_t *et131x_dbginfo;
 #define PARM_SPEED_DUPLEX_MIN   0
 #define PARM_SPEED_DUPLEX_MAX   5
 
-#define PARM_VLAN_TAG_DEF       0
-#define PARM_VLAN_TAG_MIN       0
-#define PARM_VLAN_TAG_MAX       4095
-
 #define PARM_FLOW_CTL_DEF       0
 #define PARM_FLOW_CTL_MIN       0
 #define PARM_FLOW_CTL_MAX       3
 
-#define PARM_WOL_LINK_DEF       3
-#define PARM_WOL_LINK_MIN       0
-#define PARM_WOL_LINK_MAX       3
-
-#define PARM_WOL_MATCH_DEF      7
-#define PARM_WOL_MATCH_MIN      0
-#define PARM_WOL_MATCH_MAX      7
-
 #define PARM_JUMBO_PKT_DEF      1514
 #define PARM_JUMBO_PKT_MIN      1514
 #define PARM_JUMBO_PKT_MAX      9216
@@ -129,10 +117,6 @@ extern dbg_info_t *et131x_dbginfo;
 #define PARM_PHY_COMA_MIN       0
 #define PARM_PHY_COMA_MAX       1
 
-#define PARM_MAC_STAT_DEF       1
-#define PARM_MAC_STAT_MIN       0
-#define PARM_MAC_STAT_MAX       1
-
 #define PARM_SC_GAIN_DEF        7
 #define PARM_SC_GAIN_MIN        0
 #define PARM_SC_GAIN_MAX        7
@@ -145,13 +129,7 @@ extern dbg_info_t *et131x_dbginfo;
 #define PARM_NMI_DISABLE_MIN    0
 #define PARM_NMI_DISABLE_MAX    2
 
-#define PARM_DMA_CACHE_DEF      0
-
-#define PARM_PHY_LOOPBK_DEF     0
-#define PARM_PHY_LOOPBK_MIN     0
-#define PARM_PHY_LOOPBK_MAX     1
 
-#define PARM_MAC_ADDRESS_DEF    { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }
 
 /* Module parameter for disabling NMI
  * et131x_speed_set :
@@ -184,109 +162,61 @@ MODULE_PARM_DESC(et131x_speed_set,
  * @etdev: pointer to the private adapter struct
  *
  * Parses a configuration from some location (module parameters, for example)
- * into the private adapter struct
+ * into the private adapter struct. This really has no sensible analogy in
+ * Linux as sysfs parameters are dynamic. Several things that were hee could
+ * go into sysfs, but other stuff like speed handling is part of the mii
+ * interfaces/ethtool.
  */
 void et131x_config_parse(struct et131x_adapter *etdev)
 {
-       uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF;
+       static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
+       static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 };
+       static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 };
 
        DBG_ENTER(et131x_dbginfo);
 
-       /*
-        * The NDIS driver uses the registry to store persistent per-device
-        * configuration, and reads this configuration into the appropriate
-        * elements of the private adapter structure on initialization.
-        * Because Linux has no analog to the registry, use this function to
-        * initialize the private adapter structure with a default
-        * configuration.
-        *
-        * One other possibility is to use a series of module parameters which
-        * can be passed in by the caller when the module is initialized.
-        * However, this implementation does not allow for seperate
-        * configurations in the event multiple devices are present, and hence
-        * will not suffice.
-        *
-        * If another method is derived which addresses this problem, this is
-        * where it should be implemented.
-        */
+       etdev->SpeedDuplex = et131x_speed_set;
 
-        /* Set the private adapter struct with default values for the
-         * corresponding parameters
-         */
-       if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) {
+       if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN ||
+           et131x_speed_set > PARM_SPEED_DUPLEX_MAX) {
+               dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n");
+               et131x_speed_set = PARM_SPEED_DUPLEX_DEF;
+       }
+       else if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF)
                DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n",
                            et131x_speed_set);
-               etdev->SpeedDuplex = et131x_speed_set;
-       } else {
-               etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF;
-       }
 
        /*  etdev->SpeedDuplex            = PARM_SPEED_DUPLEX_DEF; */
 
-       etdev->RegistryVlanTag = PARM_VLAN_TAG_DEF;
        etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF;
        etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF;
        etdev->RegistryPhyComa = PARM_PHY_COMA_DEF;
-       etdev->RegistryMACStat = PARM_MAC_STAT_DEF;
 
        if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF)
                etdev->RegistryNMIDisable = et131x_nmi_disable;
        else
                etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF;
 
-       etdev->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF;
+       etdev->RegistryPhyLoopbk = 0;   /* 0 off 1 on */
 
        /* Set the MAC address to a default */
-       memcpy(etdev->CurrentAddress, macAddrDef, ETH_ALEN);
+       memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN);
        etdev->bOverrideAddress = false;
 
-       DBG_TRACE(et131x_dbginfo,
-                 "Default MAC Address  : %02x:%02x:%02x:%02x:%02x:%02x\n",
-                 etdev->CurrentAddress[0], etdev->CurrentAddress[1],
-                 etdev->CurrentAddress[2], etdev->CurrentAddress[3],
-                 etdev->CurrentAddress[4], etdev->CurrentAddress[5]);
-
        /* Decode SpeedDuplex
         *
         * Set up as if we are auto negotiating always and then change if we
         * go into force mode
-        */
-       etdev->AiForceSpeed = 0;        /* Auto speed */
-       etdev->AiForceDpx = 0;  /* Auto FDX */
-
-       /* If we are the 10/100 device, and gigabit is somehow requested then
+        *
+        * If we are the 10/100 device, and gigabit is somehow requested then
         * knock it down to 100 full.
         */
        if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST &&
            etdev->SpeedDuplex == 5)
                etdev->SpeedDuplex = 4;
 
-       switch (etdev->SpeedDuplex) {
-       case 1:         /* 10Mb   Half-Duplex */
-               etdev->AiForceSpeed = 10;
-               etdev->AiForceDpx = 1;
-               break;
-
-       case 2:         /* 10Mb   Full-Duplex */
-               etdev->AiForceSpeed = 10;
-               etdev->AiForceDpx = 2;
-               break;
-
-       case 3:         /* 100Mb  Half-Duplex */
-               etdev->AiForceSpeed = 100;
-               etdev->AiForceDpx = 1;
-               break;
-
-       case 4:         /* 100Mb  Full-Duplex */
-               etdev->AiForceSpeed = 100;
-               etdev->AiForceDpx = 2;
-               break;
-
-       case 5:         /* 1000Mb Full-Duplex */
-               etdev->AiForceSpeed = 1000;
-               etdev->AiForceDpx = 2;
-               break;
-       }
+       etdev->AiForceSpeed = speed[etdev->SpeedDuplex];
+       etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */
 
        DBG_LEAVE(et131x_dbginfo);
 }
index 4d45941..c489090 100644 (file)
@@ -442,10 +442,9 @@ void et131x_error_timer_handler(unsigned long data)
 
        pm_csr.value = readl(&etdev->regs->global.pm_csr.value);
 
-       if (pm_csr.bits.pm_phy_sw_coma == 0) {
-               if (etdev->RegistryMACStat)
-                       UpdateMacStatHostCounters(etdev);
-       } else
+       if (pm_csr.bits.pm_phy_sw_coma == 0)
+               UpdateMacStatHostCounters(etdev);
+       else
                DBG_VERBOSE(et131x_dbginfo,
                            "No interrupts, in PHY coma, pm_csr = 0x%x\n",
                            pm_csr.value);