[PATCH] md: write-intent bitmap support for raid6
authorNeilBrown <neilb@cse.unsw.edu.au>
Fri, 9 Sep 2005 23:23:55 +0000 (16:23 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 9 Sep 2005 23:39:12 +0000 (16:39 -0700)
This is a direct port of the raid5 patch.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/md/md.c
drivers/md/raid6main.c

index dbf540a..008149e 100644 (file)
@@ -645,7 +645,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 
                if (sb->state & (1<<MD_SB_BITMAP_PRESENT) &&
                    mddev->bitmap_file == NULL) {
-                       if (mddev->level != 1 && mddev->level != 5) {
+                       if (mddev->level != 1 && mddev->level != 5 && mddev->level != 6) {
                                /* FIXME use a better test */
                                printk(KERN_WARNING "md: bitmaps only support for raid1\n");
                                return -EINVAL;
index 09cb727..267eb14 100644 (file)
@@ -29,6 +29,8 @@
 #include <asm/atomic.h>
 #include "raid6.h"
 
+#include <linux/raid/bitmap.h>
+
 /*
  * Stripe cache
  */
@@ -98,8 +100,13 @@ static inline void __release_stripe(raid6_conf_t *conf, struct stripe_head *sh)
                if (test_bit(STRIPE_HANDLE, &sh->state)) {
                        if (test_bit(STRIPE_DELAYED, &sh->state))
                                list_add_tail(&sh->lru, &conf->delayed_list);
-                       else
+                       else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
+                                conf->seq_write == sh->bm_seq)
+                               list_add_tail(&sh->lru, &conf->bitmap_list);
+                       else {
+                               clear_bit(STRIPE_BIT_DELAY, &sh->state);
                                list_add_tail(&sh->lru, &conf->handle_list);
+                       }
                        md_wakeup_thread(conf->mddev->thread);
                } else {
                        if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
@@ -262,6 +269,9 @@ static struct stripe_head *get_active_stripe(raid6_conf_t *conf, sector_t sector
        spin_lock_irq(&conf->device_lock);
 
        do {
+               wait_event_lock_irq(conf->wait_for_stripe,
+                                   conf->quiesce == 0,
+                                   conf->device_lock, /* nothing */);
                sh = __find_stripe(conf, sector);
                if (!sh) {
                        if (!conf->inactive_blocked)
@@ -906,6 +916,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 {
        struct bio **bip;
        raid6_conf_t *conf = sh->raid_conf;
+       int firstwrite=0;
 
        PRINTK("adding bh b#%llu to stripe s#%llu\n",
                (unsigned long long)bi->bi_sector,
@@ -914,9 +925,11 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
 
        spin_lock(&sh->lock);
        spin_lock_irq(&conf->device_lock);
-       if (forwrite)
+       if (forwrite) {
                bip = &sh->dev[dd_idx].towrite;
-       else
+               if (*bip == NULL && sh->dev[dd_idx].written == NULL)
+                       firstwrite = 1;
+       } else
                bip = &sh->dev[dd_idx].toread;
        while (*bip && (*bip)->bi_sector < bi->bi_sector) {
                if ((*bip)->bi_sector + ((*bip)->bi_size >> 9) > bi->bi_sector)
@@ -939,6 +952,13 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in
                (unsigned long long)bi->bi_sector,
                (unsigned long long)sh->sector, dd_idx);
 
+       if (conf->mddev->bitmap && firstwrite) {
+               sh->bm_seq = conf->seq_write;
+               bitmap_startwrite(conf->mddev->bitmap, sh->sector,
+                                 STRIPE_SECTORS, 0);
+               set_bit(STRIPE_BIT_DELAY, &sh->state);
+       }
+
        if (forwrite) {
                /* check if page is covered */
                sector_t sector = sh->dev[dd_idx].sector;
@@ -1066,12 +1086,13 @@ static void handle_stripe(struct stripe_head *sh)
         * need to be failed
         */
        if (failed > 2 && to_read+to_write+written) {
-               spin_lock_irq(&conf->device_lock);
                for (i=disks; i--; ) {
+                       int bitmap_end = 0;
+                       spin_lock_irq(&conf->device_lock);
                        /* fail all writes first */
                        bi = sh->dev[i].towrite;
                        sh->dev[i].towrite = NULL;
-                       if (bi) to_write--;
+                       if (bi) { to_write--; bitmap_end = 1; }
 
                        if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
                                wake_up(&conf->wait_for_overlap);
@@ -1089,6 +1110,7 @@ static void handle_stripe(struct stripe_head *sh)
                        /* and fail all 'written' */
                        bi = sh->dev[i].written;
                        sh->dev[i].written = NULL;
+                       if (bi) bitmap_end = 1;
                        while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) {
                                struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector);
                                clear_bit(BIO_UPTODATE, &bi->bi_flags);
@@ -1117,8 +1139,11 @@ static void handle_stripe(struct stripe_head *sh)
                                        bi = nextbi;
                                }
                        }
+                       spin_unlock_irq(&conf->device_lock);
+                       if (bitmap_end)
+                               bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+                                               STRIPE_SECTORS, 0, 0);
                }
-               spin_unlock_irq(&conf->device_lock);
        }
        if (failed > 2 && syncing) {
                md_done_sync(conf->mddev, STRIPE_SECTORS,0);
@@ -1155,6 +1180,7 @@ static void handle_stripe(struct stripe_head *sh)
                                if (!test_bit(R5_LOCKED, &dev->flags) &&
                                    test_bit(R5_UPTODATE, &dev->flags) ) {
                                        /* We can return any write requests */
+                                       int bitmap_end = 0;
                                        struct bio *wbi, *wbi2;
                                        PRINTK("Return write for stripe %llu disc %d\n",
                                               (unsigned long long)sh->sector, i);
@@ -1170,7 +1196,13 @@ static void handle_stripe(struct stripe_head *sh)
                                                }
                                                wbi = wbi2;
                                        }
+                                       if (dev->towrite == NULL)
+                                               bitmap_end = 1;
                                        spin_unlock_irq(&conf->device_lock);
+                                       if (bitmap_end)
+                                               bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+                                                               STRIPE_SECTORS,
+                                                               !test_bit(STRIPE_DEGRADED, &sh->state), 0);
                                }
                        }
        }
@@ -1285,7 +1317,8 @@ static void handle_stripe(struct stripe_head *sh)
                                }
                        }
                /* now if nothing is locked, and if we have enough data, we can start a write request */
-               if (locked == 0 && rcw == 0) {
+               if (locked == 0 && rcw == 0 &&
+                   !test_bit(STRIPE_BIT_DELAY, &sh->state)) {
                        if ( must_compute > 0 ) {
                                /* We have failed blocks and need to compute them */
                                switch ( failed ) {
@@ -1388,6 +1421,7 @@ static void handle_stripe(struct stripe_head *sh)
                        bdev = &sh->dev[failed_num[1]];
                        locked += !test_bit(R5_LOCKED, &bdev->flags);
                        set_bit(R5_LOCKED, &bdev->flags);
+                       clear_bit(STRIPE_DEGRADED, &sh->state);
                        set_bit(R5_Wantwrite, &bdev->flags);
 
                        set_bit(STRIPE_INSYNC, &sh->state);
@@ -1457,6 +1491,8 @@ static void handle_stripe(struct stripe_head *sh)
                        bi->bi_next = NULL;
                        generic_make_request(bi);
                } else {
+                       if (rw == 1)
+                               set_bit(STRIPE_DEGRADED, &sh->state);
                        PRINTK("skip op %ld on disc %d for sector %llu\n",
                                bi->bi_rw, i, (unsigned long long)sh->sector);
                        clear_bit(R5_LOCKED, &sh->dev[i].flags);
@@ -1481,6 +1517,20 @@ static inline void raid6_activate_delayed(raid6_conf_t *conf)
        }
 }
 
+static inline void activate_bit_delay(raid6_conf_t *conf)
+{
+       /* device_lock is held */
+       struct list_head head;
+       list_add(&head, &conf->bitmap_list);
+       list_del_init(&conf->bitmap_list);
+       while (!list_empty(&head)) {
+               struct stripe_head *sh = list_entry(head.next, struct stripe_head, lru);
+               list_del_init(&sh->lru);
+               atomic_inc(&sh->count);
+               __release_stripe(conf, sh);
+       }
+}
+
 static void unplug_slaves(mddev_t *mddev)
 {
        raid6_conf_t *conf = mddev_to_conf(mddev);
@@ -1513,8 +1563,10 @@ static void raid6_unplug_device(request_queue_t *q)
 
        spin_lock_irqsave(&conf->device_lock, flags);
 
-       if (blk_remove_plug(q))
+       if (blk_remove_plug(q)) {
+               conf->seq_flush++;
                raid6_activate_delayed(conf);
+       }
        md_wakeup_thread(mddev->thread);
 
        spin_unlock_irqrestore(&conf->device_lock, flags);
@@ -1652,10 +1704,20 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
        sector_t first_sector;
        int raid_disks = conf->raid_disks;
        int data_disks = raid_disks - 2;
+       sector_t max_sector = mddev->size << 1;
+       int sync_blocks;
 
-       if (sector_nr >= mddev->size <<1) {
+       if (sector_nr >= max_sector) {
                /* just being told to finish up .. nothing much to do */
                unplug_slaves(mddev);
+
+               if (mddev->curr_resync < max_sector) /* aborted */
+                       bitmap_end_sync(mddev->bitmap, mddev->curr_resync,
+                                       &sync_blocks, 1);
+               else /* compelted sync */
+                       conf->fullsync = 0;
+               bitmap_close_sync(mddev->bitmap);
+
                return 0;
        }
        /* if there are 2 or more failed drives and we are trying
@@ -1667,6 +1729,13 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
                *skipped = 1;
                return rv;
        }
+       if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) &&
+           !conf->fullsync && sync_blocks >= STRIPE_SECTORS) {
+               /* we can skip this block, and probably more */
+               sync_blocks /= STRIPE_SECTORS;
+               *skipped = 1;
+               return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */
+       }
 
        x = sector_nr;
        chunk_offset = sector_div(x, sectors_per_chunk);
@@ -1684,6 +1753,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
                set_current_state(TASK_UNINTERRUPTIBLE);
                schedule_timeout(1);
        }
+       bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0);
        spin_lock(&sh->lock);
        set_bit(STRIPE_SYNCING, &sh->state);
        clear_bit(STRIPE_INSYNC, &sh->state);
@@ -1717,6 +1787,13 @@ static void raid6d (mddev_t *mddev)
        while (1) {
                struct list_head *first;
 
+               if (conf->seq_flush - conf->seq_write > 0) {
+                       int seq = conf->seq_flush;
+                       bitmap_unplug(mddev->bitmap);
+                       conf->seq_write = seq;
+                       activate_bit_delay(conf);
+               }
+
                if (list_empty(&conf->handle_list) &&
                    atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD &&
                    !blk_queue_plugged(mddev->queue) &&
@@ -1750,7 +1827,7 @@ static void raid6d (mddev_t *mddev)
        PRINTK("--- raid6d inactive\n");
 }
 
-static int run (mddev_t *mddev)
+static int run(mddev_t *mddev)
 {
        raid6_conf_t *conf;
        int raid_disk, memory;
@@ -1780,6 +1857,7 @@ static int run (mddev_t *mddev)
        init_waitqueue_head(&conf->wait_for_overlap);
        INIT_LIST_HEAD(&conf->handle_list);
        INIT_LIST_HEAD(&conf->delayed_list);
+       INIT_LIST_HEAD(&conf->bitmap_list);
        INIT_LIST_HEAD(&conf->inactive_list);
        atomic_set(&conf->active_stripes, 0);
        atomic_set(&conf->preread_active_stripes, 0);
@@ -1899,6 +1977,9 @@ static int run (mddev_t *mddev)
        /* Ok, everything is just fine now */
        mddev->array_size =  mddev->size * (mddev->raid_disks - 2);
 
+       if (mddev->bitmap)
+               mddev->thread->timeout = mddev->bitmap->daemon_sleep * HZ;
+
        mddev->queue->unplug_fn = raid6_unplug_device;
        mddev->queue->issue_flush_fn = raid6_issue_flush;
        return 0;
@@ -2076,6 +2157,8 @@ static int raid6_add_disk(mddev_t *mddev, mdk_rdev_t *rdev)
                        rdev->in_sync = 0;
                        rdev->raid_disk = disk;
                        found = 1;
+                       if (rdev->saved_raid_disk != disk)
+                               conf->fullsync = 1;
                        p->rdev = rdev;
                        break;
                }
@@ -2105,6 +2188,35 @@ static int raid6_resize(mddev_t *mddev, sector_t sectors)
        return 0;
 }
 
+static void raid6_quiesce(mddev_t *mddev, int state)
+{
+       raid6_conf_t *conf = mddev_to_conf(mddev);
+
+       switch(state) {
+       case 1: /* stop all writes */
+               spin_lock_irq(&conf->device_lock);
+               conf->quiesce = 1;
+               wait_event_lock_irq(conf->wait_for_stripe,
+                                   atomic_read(&conf->active_stripes) == 0,
+                                   conf->device_lock, /* nothing */);
+               spin_unlock_irq(&conf->device_lock);
+               break;
+
+       case 0: /* re-enable writes */
+               spin_lock_irq(&conf->device_lock);
+               conf->quiesce = 0;
+               wake_up(&conf->wait_for_stripe);
+               spin_unlock_irq(&conf->device_lock);
+               break;
+       }
+       if (mddev->thread) {
+               if (mddev->bitmap)
+                       mddev->thread->timeout = mddev->bitmap->daemon_sleep * HZ;
+               else
+                       mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
+               md_wakeup_thread(mddev->thread);
+       }
+}
 static mdk_personality_t raid6_personality=
 {
        .name           = "raid6",
@@ -2119,6 +2231,7 @@ static mdk_personality_t raid6_personality=
        .spare_active   = raid6_spare_active,
        .sync_request   = sync_request,
        .resize         = raid6_resize,
+       .quiesce        = raid6_quiesce,
 };
 
 static int __init raid6_init (void)