[ARM] pxa: remove duplicate mfp definition in mach

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 4821850..271e249 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -16,305 +16,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#define mfp_to_gpio(m) ((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-       MFP_PIN_INVALID = -1,
-
-       MFP_PIN_GPIO0 = 0,
-       MFP_PIN_GPIO1,
-       MFP_PIN_GPIO2,
-       MFP_PIN_GPIO3,
-       MFP_PIN_GPIO4,
-       MFP_PIN_GPIO5,
-       MFP_PIN_GPIO6,
-       MFP_PIN_GPIO7,
-       MFP_PIN_GPIO8,
-       MFP_PIN_GPIO9,
-       MFP_PIN_GPIO10,
-       MFP_PIN_GPIO11,
-       MFP_PIN_GPIO12,
-       MFP_PIN_GPIO13,
-       MFP_PIN_GPIO14,
-       MFP_PIN_GPIO15,
-       MFP_PIN_GPIO16,
-       MFP_PIN_GPIO17,
-       MFP_PIN_GPIO18,
-       MFP_PIN_GPIO19,
-       MFP_PIN_GPIO20,
-       MFP_PIN_GPIO21,
-       MFP_PIN_GPIO22,
-       MFP_PIN_GPIO23,
-       MFP_PIN_GPIO24,
-       MFP_PIN_GPIO25,
-       MFP_PIN_GPIO26,
-       MFP_PIN_GPIO27,
-       MFP_PIN_GPIO28,
-       MFP_PIN_GPIO29,
-       MFP_PIN_GPIO30,
-       MFP_PIN_GPIO31,
-       MFP_PIN_GPIO32,
-       MFP_PIN_GPIO33,
-       MFP_PIN_GPIO34,
-       MFP_PIN_GPIO35,
-       MFP_PIN_GPIO36,
-       MFP_PIN_GPIO37,
-       MFP_PIN_GPIO38,
-       MFP_PIN_GPIO39,
-       MFP_PIN_GPIO40,
-       MFP_PIN_GPIO41,
-       MFP_PIN_GPIO42,
-       MFP_PIN_GPIO43,
-       MFP_PIN_GPIO44,
-       MFP_PIN_GPIO45,
-       MFP_PIN_GPIO46,
-       MFP_PIN_GPIO47,
-       MFP_PIN_GPIO48,
-       MFP_PIN_GPIO49,
-       MFP_PIN_GPIO50,
-       MFP_PIN_GPIO51,
-       MFP_PIN_GPIO52,
-       MFP_PIN_GPIO53,
-       MFP_PIN_GPIO54,
-       MFP_PIN_GPIO55,
-       MFP_PIN_GPIO56,
-       MFP_PIN_GPIO57,
-       MFP_PIN_GPIO58,
-       MFP_PIN_GPIO59,
-       MFP_PIN_GPIO60,
-       MFP_PIN_GPIO61,
-       MFP_PIN_GPIO62,
-       MFP_PIN_GPIO63,
-       MFP_PIN_GPIO64,
-       MFP_PIN_GPIO65,
-       MFP_PIN_GPIO66,
-       MFP_PIN_GPIO67,
-       MFP_PIN_GPIO68,
-       MFP_PIN_GPIO69,
-       MFP_PIN_GPIO70,
-       MFP_PIN_GPIO71,
-       MFP_PIN_GPIO72,
-       MFP_PIN_GPIO73,
-       MFP_PIN_GPIO74,
-       MFP_PIN_GPIO75,
-       MFP_PIN_GPIO76,
-       MFP_PIN_GPIO77,
-       MFP_PIN_GPIO78,
-       MFP_PIN_GPIO79,
-       MFP_PIN_GPIO80,
-       MFP_PIN_GPIO81,
-       MFP_PIN_GPIO82,
-       MFP_PIN_GPIO83,
-       MFP_PIN_GPIO84,
-       MFP_PIN_GPIO85,
-       MFP_PIN_GPIO86,
-       MFP_PIN_GPIO87,
-       MFP_PIN_GPIO88,
-       MFP_PIN_GPIO89,
-       MFP_PIN_GPIO90,
-       MFP_PIN_GPIO91,
-       MFP_PIN_GPIO92,
-       MFP_PIN_GPIO93,
-       MFP_PIN_GPIO94,
-       MFP_PIN_GPIO95,
-       MFP_PIN_GPIO96,
-       MFP_PIN_GPIO97,
-       MFP_PIN_GPIO98,
-       MFP_PIN_GPIO99,
-       MFP_PIN_GPIO100,
-       MFP_PIN_GPIO101,
-       MFP_PIN_GPIO102,
-       MFP_PIN_GPIO103,
-       MFP_PIN_GPIO104,
-       MFP_PIN_GPIO105,
-       MFP_PIN_GPIO106,
-       MFP_PIN_GPIO107,
-       MFP_PIN_GPIO108,
-       MFP_PIN_GPIO109,
-       MFP_PIN_GPIO110,
-       MFP_PIN_GPIO111,
-       MFP_PIN_GPIO112,
-       MFP_PIN_GPIO113,
-       MFP_PIN_GPIO114,
-       MFP_PIN_GPIO115,
-       MFP_PIN_GPIO116,
-       MFP_PIN_GPIO117,
-       MFP_PIN_GPIO118,
-       MFP_PIN_GPIO119,
-       MFP_PIN_GPIO120,
-       MFP_PIN_GPIO121,
-       MFP_PIN_GPIO122,
-       MFP_PIN_GPIO123,
-       MFP_PIN_GPIO124,
-       MFP_PIN_GPIO125,
-       MFP_PIN_GPIO126,
-       MFP_PIN_GPIO127,
-       MFP_PIN_GPIO0_2,
-       MFP_PIN_GPIO1_2,
-       MFP_PIN_GPIO2_2,
-       MFP_PIN_GPIO3_2,
-       MFP_PIN_GPIO4_2,
-       MFP_PIN_GPIO5_2,
-       MFP_PIN_GPIO6_2,
-       MFP_PIN_GPIO7_2,
-       MFP_PIN_GPIO8_2,
-       MFP_PIN_GPIO9_2,
-       MFP_PIN_GPIO10_2,
-       MFP_PIN_GPIO11_2,
-       MFP_PIN_GPIO12_2,
-       MFP_PIN_GPIO13_2,
-       MFP_PIN_GPIO14_2,
-       MFP_PIN_GPIO15_2,
-       MFP_PIN_GPIO16_2,
-       MFP_PIN_GPIO17_2,
-
-       MFP_PIN_ULPI_STP,
-       MFP_PIN_ULPI_NXT,
-       MFP_PIN_ULPI_DIR,
-
-       MFP_PIN_nXCVREN,
-       MFP_PIN_DF_CLE_nOE,
-       MFP_PIN_DF_nADV1_ALE,
-       MFP_PIN_DF_SCLK_E,
-       MFP_PIN_DF_SCLK_S,
-       MFP_PIN_nBE0,
-       MFP_PIN_nBE1,
-       MFP_PIN_DF_nADV2_ALE,
-       MFP_PIN_DF_INT_RnB,
-       MFP_PIN_DF_nCS0,
-       MFP_PIN_DF_nCS1,
-       MFP_PIN_nLUA,
-       MFP_PIN_nLLA,
-       MFP_PIN_DF_nWE,
-       MFP_PIN_DF_ALE_nWE,
-       MFP_PIN_DF_nRE_nOE,
-       MFP_PIN_DF_ADDR0,
-       MFP_PIN_DF_ADDR1,
-       MFP_PIN_DF_ADDR2,
-       MFP_PIN_DF_ADDR3,
-       MFP_PIN_DF_IO0,
-       MFP_PIN_DF_IO1,
-       MFP_PIN_DF_IO2,
-       MFP_PIN_DF_IO3,
-       MFP_PIN_DF_IO4,
-       MFP_PIN_DF_IO5,
-       MFP_PIN_DF_IO6,
-       MFP_PIN_DF_IO7,
-       MFP_PIN_DF_IO8,
-       MFP_PIN_DF_IO9,
-       MFP_PIN_DF_IO10,
-       MFP_PIN_DF_IO11,
-       MFP_PIN_DF_IO12,
-       MFP_PIN_DF_IO13,
-       MFP_PIN_DF_IO14,
-       MFP_PIN_DF_IO15,
-
-       /* additional pins on PXA930 */
-       MFP_PIN_GSIM_UIO,
-       MFP_PIN_GSIM_UCLK,
-       MFP_PIN_GSIM_UDET,
-       MFP_PIN_GSIM_nURST,
-       MFP_PIN_PMIC_INT,
-       MFP_PIN_RDY,
-
-       MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- *               alternate function = 0,
- *               drive strength = fast 3mA (MFP_DS03X)
- *               low power mode = default
- *               edge detection = none
- *
- * MFP_CFG     - default MFPR value with alternate function
- * MFP_CFG_DRV - default MFPR value with alternate function and
- *               pin drive strength
- * MFP_CFG_LPM - default MFPR value with alternate function and
- *               low power mode
- * MFP_CFG_X   - default MFPR value with alternate function,
- *               pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)             ((x) & 0x3ff)
-
-#define MFP_AF0                        (0x0 << 10)
-#define MFP_AF1                        (0x1 << 10)
-#define MFP_AF2                        (0x2 << 10)
-#define MFP_AF3                        (0x3 << 10)
-#define MFP_AF4                        (0x4 << 10)
-#define MFP_AF5                        (0x5 << 10)
-#define MFP_AF6                        (0x6 << 10)
-#define MFP_AF7                        (0x7 << 10)
-#define MFP_AF_MASK            (0x7 << 10)
-#define MFP_AF(x)              (((x) >> 10) & 0x7)
-
-#define MFP_DS01X              (0x0 << 13)
-#define MFP_DS02X              (0x1 << 13)
-#define MFP_DS03X              (0x2 << 13)
-#define MFP_DS04X              (0x3 << 13)
-#define MFP_DS06X              (0x4 << 13)
-#define MFP_DS08X              (0x5 << 13)
-#define MFP_DS10X              (0x6 << 13)
-#define MFP_DS13X              (0x7 << 13)
-#define MFP_DS_MASK            (0x7 << 13)
-#define MFP_DS(x)              (((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT                (0x0 << 16)
-#define MFP_LPM_DRIVE_LOW      (0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH     (0x2 << 16)
-#define MFP_LPM_PULL_LOW       (0x3 << 16)
-#define MFP_LPM_PULL_HIGH      (0x4 << 16)
-#define MFP_LPM_FLOAT          (0x5 << 16)
-#define MFP_LPM_INPUT          (0x6 << 16)
-#define MFP_LPM_STATE_MASK     (0x7 << 16)
-#define MFP_LPM_STATE(x)       (((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE      (0x0 << 19)
-#define MFP_LPM_EDGE_RISE      (0x1 << 19)
-#define MFP_LPM_EDGE_FALL      (0x2 << 19)
-#define MFP_LPM_EDGE_BOTH      (0x3 << 19)
-#define MFP_LPM_EDGE_MASK      (0x3 << 19)
-#define MFP_LPM_EDGE(x)                (((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE          (0x0 << 21)
-#define MFP_PULL_LOW           (0x1 << 21)
-#define MFP_PULL_HIGH          (0x2 << 21)
-#define MFP_PULL_BOTH          (0x3 << 21)
-#define MFP_PULL_MASK          (0x3 << 21)
-#define MFP_PULL(x)            (((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT                (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-                                MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)               \
-       ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-        (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)      \
-       ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-        (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)      \
-       ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-        (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)   \
-       ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-        (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */