N: David Woodhouse
E: dwmw2@infradead.org
-D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE,
-D: some Alpha platform porting from 2.0, Memory Technology Devices,
-D: Acquire watchdog timer, PC speaker driver maintenance,
+D: JFFS2 file system, Memory Technology Device subsystem,
D: various other stuff that annoyed me by not working.
-S: c/o Red Hat Engineering
-S: Rustat House
-S: 60 Clifton Road
-S: Cambridge. CB1 7EG
+S: c/o Intel Corporation
+S: Pipers Way
+S: Swindon. SN3 1RJ
S: England
N: Chris Wright
u64
dma_get_required_mask(struct device *dev)
-After setting the mask with dma_set_mask(), this API returns the
-actual mask (within that already set) that the platform actually
-requires to operate efficiently. Usually this means the returned mask
+This API returns the mask that the platform requires to
+operate efficiently. Usually this means the returned mask
is the minimum required to cover all of memory. Examining the
required mask gives drivers with variable descriptor sizes the
opportunity to use smaller descriptors as necessary.
Requesting the required mask does not alter the current mask. If you
-wish to take advantage of it, you should issue another dma_set_mask()
-call to lower the mask again.
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
Part Id - Streaming DMA mappings
goto err;
}
}
+ if (!maskset && !tid && !containerset) {
+ usage();
+ goto err;
+ }
do {
int i;
CGROUPS
-------
-Written by Paul Menage <menage@google.com> based on Documentation/cpusets.txt
+Written by Paul Menage <menage@google.com> based on
+Documentation/cgroups/cpusets.txt
Original copyright statements from cpusets.txt:
Portions Copyright (C) 2004 BULL SA.
tracking. The intention is that other subsystems hook into the generic
cgroup support to provide new attributes for cgroups, such as
accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cpusets.txt) allows
+access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows
you to associate a set of CPUs and a set of memory nodes with the
tasks in each cgroup.
is complex. This is a document for memcg's internal behavior.
Please note that implementation details can be changed.
-(*) Topics on API should be in Documentation/controllers/memory.txt)
+(*) Topics on API should be in Documentation/cgroups/memory.txt)
0. How to record usage ?
2 objects are used.
2.4 /proc/sys/vm - The virtual memory subsystem
-----------------------------------------------
-The files in this directory can be used to tune the operation of the virtual
-memory (VM) subsystem of the Linux kernel.
-
-vfs_cache_pressure
-------------------
-
-Controls the tendency of the kernel to reclaim the memory which is used for
-caching of directory and inode objects.
-
-At the default value of vfs_cache_pressure=100 the kernel will attempt to
-reclaim dentries and inodes at a "fair" rate with respect to pagecache and
-swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
-to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
-causes the kernel to prefer to reclaim dentries and inodes.
-
-dirty_background_bytes
-----------------------
-
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
-
-If dirty_background_bytes is written, dirty_background_ratio becomes a function
-of its value (dirty_background_bytes / the amount of dirtyable system memory).
-
-dirty_background_ratio
-----------------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which the pdflush background writeback daemon will start writing out
-dirty data.
-
-If dirty_background_ratio is written, dirty_background_bytes becomes a function
-of its value (dirty_background_ratio * the amount of dirtyable system memory).
-
-dirty_bytes
------------
-
-Contains the amount of dirty memory at which a process generating disk writes
-will itself start writeback.
-
-If dirty_bytes is written, dirty_ratio becomes a function of its value
-(dirty_bytes / the amount of dirtyable system memory).
-
-dirty_ratio
------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which a process which is generating disk writes will itself start
-writing out dirty data.
-
-If dirty_ratio is written, dirty_bytes becomes a function of its value
-(dirty_ratio * the amount of dirtyable system memory).
-
-dirty_writeback_centisecs
--------------------------
-
-The pdflush writeback daemons will periodically wake up and write `old' data
-out to disk. This tunable expresses the interval between those wakeups, in
-100'ths of a second.
-
-Setting this to zero disables periodic writeback altogether.
-
-dirty_expire_centisecs
-----------------------
-
-This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
-
-highmem_is_dirtyable
---------------------
-
-Only present if CONFIG_HIGHMEM is set.
-
-This defaults to 0 (false), meaning that the ratios set above are calculated
-as a percentage of lowmem only. This protects against excessive scanning
-in page reclaim, swapping and general VM distress.
-
-Setting this to 1 can be useful on 32 bit machines where you want to make
-random changes within an MMAPed file that is larger than your available
-lowmem without causing large quantities of random IO. Is is safe if the
-behavior of all programs running on the machine is known and memory will
-not be otherwise stressed.
-
-legacy_va_layout
-----------------
-
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
-will use the legacy (2.4) layout for all processes.
-
-lowmem_reserve_ratio
----------------------
-
-For some specialised workloads on highmem machines it is dangerous for
-the kernel to allow process memory to be allocated from the "lowmem"
-zone. This is because that memory could then be pinned via the mlock()
-system call, or by unavailability of swapspace.
-
-And on large highmem machines this lack of reclaimable lowmem memory
-can be fatal.
-
-So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem. This means that
-a certain amount of lowmem is defended from the possibility of being
-captured into pinned user memory.
-
-(The same argument applies to the old 16 megabyte ISA DMA region. This
-mechanism will also defend that region from allocations which could use
-highmem or lowmem).
-
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
-in defending these lower zones.
-
-If you have a machine which uses highmem or ISA DMA and your
-applications are using mlock(), or if you are running with no swap then
-you probably should change the lowmem_reserve_ratio setting.
-
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256 256 32
--
-Note: # of this elements is one fewer than number of zones. Because the highest
- zone's value is not necessary for following calculation.
-
-But, these values are not used directly. The kernel calculates # of protection
-pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
-
--
-Node 0, zone DMA
- pages free 1355
- min 3
- low 3
- high 4
- :
- :
- numa_other 0
- protection: (0, 2004, 2004, 2004)
- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- pagesets
- cpu: 0 pcp: 0
- :
--
-These protections are added to score to judge whether this zone should be used
-for page allocation or should be reclaimed.
-
-In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
-(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
-normal page requirement. If requirement is DMA zone(index=0), protection[0]
-(=0) is used.
-
-zone[i]'s protection[j] is calculated by following expression.
-
-(i < j):
- zone[i]->protection[j]
- = (total sums of present_pages from zone[i+1] to zone[j] on the node)
- / lowmem_reserve_ratio[i];
-(i = j):
- (should not be protected. = 0;
-(i > j):
- (not necessary, but looks 0)
-
-The default values of lowmem_reserve_ratio[i] are
- 256 (if zone[i] means DMA or DMA32 zone)
- 32 (others).
-As above expression, they are reciprocal number of ratio.
-256 means 1/256. # of protection pages becomes about "0.39%" of total present
-pages of higher zones on the node.
-
-If you would like to protect more pages, smaller values are effective.
-The minimum value is 1 (1/1 -> 100%).
-
-page-cluster
-------------
-
-page-cluster controls the number of pages which are written to swap in
-a single attempt. The swap I/O size.
-
-It is a logarithmic value - setting it to zero means "1 page", setting
-it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
-
-The default value is three (eight pages at a time). There may be some
-small benefits in tuning this to a different value if your workload is
-swap-intensive.
-
-overcommit_memory
------------------
-
-Controls overcommit of system memory, possibly allowing processes
-to allocate (but not use) more memory than is actually available.
-
-
-0 - Heuristic overcommit handling. Obvious overcommits of
- address space are refused. Used for a typical system. It
- ensures a seriously wild allocation fails while allowing
- overcommit to reduce swap usage. root is allowed to
- allocate slightly more memory in this mode. This is the
- default.
-
-1 - Always overcommit. Appropriate for some scientific
- applications.
-
-2 - Don't overcommit. The total address space commit
- for the system is not permitted to exceed swap plus a
- configurable percentage (default is 50) of physical RAM.
- Depending on the percentage you use, in most situations
- this means a process will not be killed while attempting
- to use already-allocated memory but will receive errors
- on memory allocation as appropriate.
-
-overcommit_ratio
-----------------
-
-Percentage of physical memory size to include in overcommit calculations
-(see above.)
-
-Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
-
- swapspace = total size of all swap areas
- physmem = size of physical memory in system
-
-nr_hugepages and hugetlb_shm_group
-----------------------------------
-
-nr_hugepages configures number of hugetlb page reserved for the system.
-
-hugetlb_shm_group contains group id that is allowed to create SysV shared
-memory segment using hugetlb page.
-
-hugepages_treat_as_movable
---------------------------
-
-This parameter is only useful when kernelcore= is specified at boot time to
-create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
-are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
-value written to hugepages_treat_as_movable allows huge pages to be allocated
-from ZONE_MOVABLE.
-
-Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
-pages pool can easily grow or shrink within. Assuming that applications are
-not running that mlock() a lot of memory, it is likely the huge pages pool
-can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
-into nr_hugepages and triggering page reclaim.
-
-laptop_mode
------------
-
-laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-
-block_dump
-----------
-
-block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
-
-swap_token_timeout
-------------------
-
-This file contains valid hold time of swap out protection token. The Linux
-VM has token based thrashing control mechanism and uses the token to prevent
-unnecessary page faults in thrashing situation. The unit of the value is
-second. The value would be useful to tune thrashing behavior.
-
-drop_caches
------------
-
-Writing to this will cause the kernel to drop clean caches, dentries and
-inodes from memory, causing that memory to become free.
-
-To free pagecache:
- echo 1 > /proc/sys/vm/drop_caches
-To free dentries and inodes:
- echo 2 > /proc/sys/vm/drop_caches
-To free pagecache, dentries and inodes:
- echo 3 > /proc/sys/vm/drop_caches
-
-As this is a non-destructive operation and dirty objects are not freeable, the
-user should run `sync' first.
+Please see: Documentation/sysctls/vm.txt for a description of these
+entries.
2.5 /proc/sys/dev - Device specific parameters
--- /dev/null
+This describes the interface for the ADT7475 driver:
+
+(there are 4 fans, numbered fan1 to fan4):
+
+fanX_input Read the current speed of the fan (in RPMs)
+fanX_min Read/write the minimum speed of the fan. Dropping
+ below this sets an alarm.
+
+(there are three PWMs, numbered pwm1 to pwm3):
+
+pwmX Read/write the current duty cycle of the PWM. Writes
+ only have effect when auto mode is turned off (see
+ below). Range is 0 - 255.
+
+pwmX_enable Fan speed control method:
+
+ 0 - No control (fan at full speed)
+ 1 - Manual fan speed control (using pwm[1-*])
+ 2 - Automatic fan speed control
+
+pwmX_auto_channels_temp Select which channels affect this PWM
+
+ 1 - TEMP1 controls PWM
+ 2 - TEMP2 controls PWM
+ 4 - TEMP3 controls PWM
+ 6 - TEMP2 and TEMP3 control PWM
+ 7 - All three inputs control PWM
+
+pwmX_freq Read/write the PWM frequency in Hz. The number
+ should be one of the following:
+
+ 11 Hz
+ 14 Hz
+ 22 Hz
+ 29 Hz
+ 35 Hz
+ 44 Hz
+ 58 Hz
+ 88 Hz
+
+pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode
+
+pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode
+
+(there are three temperature settings numbered temp1 to temp3):
+
+tempX_input Read the current temperature. The value is in milli
+ degrees of Celsius.
+
+tempX_max Read/write the upper temperature limit - exceeding this
+ will cause an alarm.
+
+tempX_min Read/write the lower temperature limit - exceeding this
+ will cause an alarm.
+
+tempX_offset Read/write the temperature adjustment offset
+
+tempX_crit Read/write the THERM limit for remote1.
+
+tempX_crit_hyst Set the temperature value below crit where the
+ fans will stay on - this helps drive the temperature
+ low enough so it doesn't stay near the edge and
+ cause THERM to keep tripping.
+
+tempX_auto_point1_temp Read/write the minimum temperature where the fans will
+ turn on in automatic mode.
+
+tempX_auto_point2_temp Read/write the maximum temperature over which the fans
+ will run in automatic mode. tempX_auto_point1_temp
+ and tempX_auto_point2_temp together define the
+ range of automatic control.
+
+tempX_alarm Read a 1 if the max/min alarm is set
+tempX_fault Read a 1 if either temp1 or temp3 diode has a fault
+
+(There are two voltage settings, in1 and in2):
+
+inX_input Read the current voltage on VCC. Value is in
+ millivolts.
+
+inX_min read/write the minimum voltage limit.
+ Dropping below this causes an alarm.
+
+inX_max read/write the maximum voltage limit.
+ Exceeding this causes an alarm.
+
+inX_alarm Read a 1 if the max/min alarm is set.
Description
-----------
-This driver provides support for the accelerometer found in various HP laptops
-sporting the feature officially called "HP Mobile Data Protection System 3D" or
-"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
-(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
-have their axis automatically oriented on standard way (eg: you can directly
-play neverball). The accelerometer data is readable via
+This driver provides support for the accelerometer found in various HP
+laptops sporting the feature officially called "HP Mobile Data
+Protection System 3D" or "HP 3D DriveGuard". It detect automatically
+laptops with this sensor. Known models (for now the HP 2133, nc6420,
+nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
+automatically oriented on standard way (eg: you can directly play
+neverball). The accelerometer data is readable via
/sys/devices/platform/lis3lv02d.
Sysfs attributes under /sys/devices/platform/lis3lv02d/:
position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input class device operation.
- write: forces the base to be recalibrated with the current position.
+calibrate - read: values (x, y, z) that are used as the base for input
+ class device operation.
+ write: forces the base to be recalibrated with the current
+ position.
rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing
* When the laptop is horizontal the position reported is about 0 for X and Y
and a positive value for Z
* If the left side is elevated, X increases (becomes positive)
- * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the front side (where the touchpad is) is elevated, Y decreases
+ (becomes negative)
* If the laptop is put upside-down, Z becomes negative
-If your laptop model is not recognized (cf "dmesg"), you can send an email to the
-authors to add it to the database. When reporting a new laptop, please include
-the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
-in these four cases.
+If your laptop model is not recognized (cf "dmesg"), you can send an
+email to the authors to add it to the database. When reporting a new
+laptop, please include the output of "dmidecode" plus the value of
+/sys/devices/platform/lis3lv02d/position in these four cases.
ThinkPad ACPI Extras Driver
- Version 0.21
- May 29th, 2008
+ Version 0.22
+ November 23rd, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
This driver used to be named ibm-acpi until kernel 2.6.21 and release
0.13-20070314. It used to be in the drivers/acpi tree, but it was
moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
-2.6.22, and release 0.14.
+2.6.22, and release 0.14. It was moved to drivers/platform/x86 for
+kernel 2.6.29 and release 0.22.
The driver is named "thinkpad-acpi". In some places, like module
names, "thinkpad_acpi" is used because of userspace issues.
rfkill controller switch "tpacpi_wwan_sw": refer to
Documentation/rfkill.txt for details.
+EXPERIMENTAL: UWB
+-----------------
+
+This feature is marked EXPERIMENTAL because it has not been extensively
+tested and validated in various ThinkPad models yet. The feature may not
+work as expected. USE WITH CAUTION! To use this feature, you need to supply
+the experimental=1 parameter when loading the module.
+
+sysfs rfkill class: switch "tpacpi_uwb_sw"
+
+This feature exports an rfkill controller for the UWB device, if one is
+present and enabled in the BIOS.
+
+Sysfs notes:
+
+ rfkill controller switch "tpacpi_uwb_sw": refer to
+ Documentation/rfkill.txt for details.
+
Multiple Commands, Module Parameters
------------------------------------
b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver
-Four configs variables are introduced:
+Following extra configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
controller
- CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
- per descriptor
SUPPORTED IDE MODES
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
This options needs CONFIG_CGROUPS to be defined, and lets the administrator
create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See
- Documentation/cgroups.txt for more information about this filesystem.
+ Documentation/cgroups/cgroups.txt for more information about this filesystem.
Only one of these options to group tasks can be chosen and not both.
-Documentation for /proc/sys/vm/* kernel version 2.2.10
+Documentation for /proc/sys/vm/* kernel version 2.6.29
(c) 1998, 1999, Rik van Riel <riel@nl.linux.org>
+ (c) 2008 Peter W. Morreale <pmorreale@novell.com>
For general info and legal blurb, please look in README.
==============================================================
This file contains the documentation for the sysctl files in
-/proc/sys/vm and is valid for Linux kernel version 2.2.
+/proc/sys/vm and is valid for Linux kernel version 2.6.29.
The files in this directory can be used to tune the operation
of the virtual memory (VM) subsystem of the Linux kernel and
files can be found in mm/swap.c.
Currently, these files are in /proc/sys/vm:
-- overcommit_memory
-- page-cluster
-- dirty_ratio
+
+- block_dump
+- dirty_background_bytes
- dirty_background_ratio
+- dirty_bytes
- dirty_expire_centisecs
+- dirty_ratio
- dirty_writeback_centisecs
-- highmem_is_dirtyable (only if CONFIG_HIGHMEM set)
+- drop_caches
+- hugepages_treat_as_movable
+- hugetlb_shm_group
+- laptop_mode
+- legacy_va_layout
+- lowmem_reserve_ratio
- max_map_count
- min_free_kbytes
-- laptop_mode
-- block_dump
-- drop-caches
-- zone_reclaim_mode
-- min_unmapped_ratio
- min_slab_ratio
-- panic_on_oom
-- oom_dump_tasks
-- oom_kill_allocating_task
-- mmap_min_address
-- numa_zonelist_order
+- min_unmapped_ratio
+- mmap_min_addr
- nr_hugepages
- nr_overcommit_hugepages
-- nr_trim_pages (only if CONFIG_MMU=n)
+- nr_pdflush_threads
+- nr_trim_pages (only if CONFIG_MMU=n)
+- numa_zonelist_order
+- oom_dump_tasks
+- oom_kill_allocating_task
+- overcommit_memory
+- overcommit_ratio
+- page-cluster
+- panic_on_oom
+- percpu_pagelist_fraction
+- stat_interval
+- swappiness
+- vfs_cache_pressure
+- zone_reclaim_mode
+
==============================================================
-dirty_bytes, dirty_ratio, dirty_background_bytes,
-dirty_background_ratio, dirty_expire_centisecs,
-dirty_writeback_centisecs, highmem_is_dirtyable,
-vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout,
-drop-caches, hugepages_treat_as_movable:
+block_dump
-See Documentation/filesystems/proc.txt
+block_dump enables block I/O debugging when set to a nonzero value. More
+information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
==============================================================
-overcommit_memory:
+dirty_background_bytes
-This value contains a flag that enables memory overcommitment.
+Contains the amount of dirty memory at which the pdflush background writeback
+daemon will start writeback.
-When this flag is 0, the kernel attempts to estimate the amount
-of free memory left when userspace requests more memory.
+If dirty_background_bytes is written, dirty_background_ratio becomes a function
+of its value (dirty_background_bytes / the amount of dirtyable system memory).
-When this flag is 1, the kernel pretends there is always enough
-memory until it actually runs out.
+==============================================================
-When this flag is 2, the kernel uses a "never overcommit"
-policy that attempts to prevent any overcommit of memory.
+dirty_background_ratio
-This feature can be very useful because there are a lot of
-programs that malloc() huge amounts of memory "just-in-case"
-and don't use much of it.
+Contains, as a percentage of total system memory, the number of pages at which
+the pdflush background writeback daemon will start writing out dirty data.
-The default value is 0.
+==============================================================
-See Documentation/vm/overcommit-accounting and
-security/commoncap.c::cap_vm_enough_memory() for more information.
+dirty_bytes
+
+Contains the amount of dirty memory at which a process generating disk writes
+will itself start writeback.
+
+If dirty_bytes is written, dirty_ratio becomes a function of its value
+(dirty_bytes / the amount of dirtyable system memory).
==============================================================
-overcommit_ratio:
+dirty_expire_centisecs
-When overcommit_memory is set to 2, the committed address
-space is not permitted to exceed swap plus this percentage
-of physical RAM. See above.
+This tunable is used to define when dirty data is old enough to be eligible
+for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
+Data which has been dirty in-memory for longer than this interval will be
+written out next time a pdflush daemon wakes up.
+
+==============================================================
+
+dirty_ratio
+
+Contains, as a percentage of total system memory, the number of pages at which
+a process which is generating disk writes will itself start writing out dirty
+data.
==============================================================
-page-cluster:
+dirty_writeback_centisecs
-The Linux VM subsystem avoids excessive disk seeks by reading
-multiple pages on a page fault. The number of pages it reads
-is dependent on the amount of memory in your machine.
+The pdflush writeback daemons will periodically wake up and write `old' data
+out to disk. This tunable expresses the interval between those wakeups, in
+100'ths of a second.
-The number of pages the kernel reads in at once is equal to
-2 ^ page-cluster. Values above 2 ^ 5 don't make much sense
-for swap because we only cluster swap data in 32-page groups.
+Setting this to zero disables periodic writeback altogether.
==============================================================
-max_map_count:
+drop_caches
-This file contains the maximum number of memory map areas a process
-may have. Memory map areas are used as a side-effect of calling
-malloc, directly by mmap and mprotect, and also when loading shared
-libraries.
+Writing to this will cause the kernel to drop clean caches, dentries and
+inodes from memory, causing that memory to become free.
-While most applications need less than a thousand maps, certain
-programs, particularly malloc debuggers, may consume lots of them,
-e.g., up to one or two maps per allocation.
+To free pagecache:
+ echo 1 > /proc/sys/vm/drop_caches
+To free dentries and inodes:
+ echo 2 > /proc/sys/vm/drop_caches
+To free pagecache, dentries and inodes:
+ echo 3 > /proc/sys/vm/drop_caches
-The default value is 65536.
+As this is a non-destructive operation and dirty objects are not freeable, the
+user should run `sync' first.
==============================================================
-min_free_kbytes:
+hugepages_treat_as_movable
-This is used to force the Linux VM to keep a minimum number
-of kilobytes free. The VM uses this number to compute a pages_min
-value for each lowmem zone in the system. Each lowmem zone gets
-a number of reserved free pages based proportionally on its size.
+This parameter is only useful when kernelcore= is specified at boot time to
+create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
+are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
+value written to hugepages_treat_as_movable allows huge pages to be allocated
+from ZONE_MOVABLE.
-Some minimal amount of memory is needed to satisfy PF_MEMALLOC
-allocations; if you set this to lower than 1024KB, your system will
-become subtly broken, and prone to deadlock under high loads.
-
-Setting this too high will OOM your machine instantly.
+Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
+pages pool can easily grow or shrink within. Assuming that applications are
+not running that mlock() a lot of memory, it is likely the huge pages pool
+can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
+into nr_hugepages and triggering page reclaim.
==============================================================
-percpu_pagelist_fraction
+hugetlb_shm_group
-This is the fraction of pages at most (high mark pcp->high) in each zone that
-are allocated for each per cpu page list. The min value for this is 8. It
-means that we don't allow more than 1/8th of pages in each zone to be
-allocated in any single per_cpu_pagelist. This entry only changes the value
-of hot per cpu pagelists. User can specify a number like 100 to allocate
-1/100th of each zone to each per cpu page list.
+hugetlb_shm_group contains group id that is allowed to create SysV
+shared memory segment using hugetlb page.
-The batch value of each per cpu pagelist is also updated as a result. It is
-set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
+==============================================================
-The initial value is zero. Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
+laptop_mode
-===============================================================
+laptop_mode is a knob that controls "laptop mode". All the things that are
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-zone_reclaim_mode:
+==============================================================
-Zone_reclaim_mode allows someone to set more or less aggressive approaches to
-reclaim memory when a zone runs out of memory. If it is set to zero then no
-zone reclaim occurs. Allocations will be satisfied from other zones / nodes
-in the system.
+legacy_va_layout
-This is value ORed together of
+If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+will use the legacy (2.4) layout for all processes.
-1 = Zone reclaim on
-2 = Zone reclaim writes dirty pages out
-4 = Zone reclaim swaps pages
+==============================================================
-zone_reclaim_mode is set during bootup to 1 if it is determined that pages
-from remote zones will cause a measurable performance reduction. The
-page allocator will then reclaim easily reusable pages (those page
-cache pages that are currently not used) before allocating off node pages.
+lowmem_reserve_ratio
+
+For some specialised workloads on highmem machines it is dangerous for
+the kernel to allow process memory to be allocated from the "lowmem"
+zone. This is because that memory could then be pinned via the mlock()
+system call, or by unavailability of swapspace.
+
+And on large highmem machines this lack of reclaimable lowmem memory
+can be fatal.
+
+So the Linux page allocator has a mechanism which prevents allocations
+which _could_ use highmem from using too much lowmem. This means that
+a certain amount of lowmem is defended from the possibility of being
+captured into pinned user memory.
+
+(The same argument applies to the old 16 megabyte ISA DMA region. This
+mechanism will also defend that region from allocations which could use
+highmem or lowmem).
+
+The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+in defending these lower zones.
+
+If you have a machine which uses highmem or ISA DMA and your
+applications are using mlock(), or if you are running with no swap then
+you probably should change the lowmem_reserve_ratio setting.
+
+The lowmem_reserve_ratio is an array. You can see them by reading this file.
+-
+% cat /proc/sys/vm/lowmem_reserve_ratio
+256 256 32
+-
+Note: # of this elements is one fewer than number of zones. Because the highest
+ zone's value is not necessary for following calculation.
+
+But, these values are not used directly. The kernel calculates # of protection
+pages for each zones from them. These are shown as array of protection pages
+in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+Each zone has an array of protection pages like this.
+
+-
+Node 0, zone DMA
+ pages free 1355
+ min 3
+ low 3
+ high 4
+ :
+ :
+ numa_other 0
+ protection: (0, 2004, 2004, 2004)
+ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ pagesets
+ cpu: 0 pcp: 0
+ :
+-
+These protections are added to score to judge whether this zone should be used
+for page allocation or should be reclaimed.
+
+In this example, if normal pages (index=2) are required to this DMA zone and
+pages_high is used for watermark, the kernel judges this zone should not be
+used because pages_free(1355) is smaller than watermark + protection[2]
+(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
+normal page requirement. If requirement is DMA zone(index=0), protection[0]
+(=0) is used.
+
+zone[i]'s protection[j] is calculated by following expression.
+
+(i < j):
+ zone[i]->protection[j]
+ = (total sums of present_pages from zone[i+1] to zone[j] on the node)
+ / lowmem_reserve_ratio[i];
+(i = j):
+ (should not be protected. = 0;
+(i > j):
+ (not necessary, but looks 0)
+
+The default values of lowmem_reserve_ratio[i] are
+ 256 (if zone[i] means DMA or DMA32 zone)
+ 32 (others).
+As above expression, they are reciprocal number of ratio.
+256 means 1/256. # of protection pages becomes about "0.39%" of total present
+pages of higher zones on the node.
+
+If you would like to protect more pages, smaller values are effective.
+The minimum value is 1 (1/1 -> 100%).
-It may be beneficial to switch off zone reclaim if the system is
-used for a file server and all of memory should be used for caching files
-from disk. In that case the caching effect is more important than
-data locality.
+==============================================================
-Allowing zone reclaim to write out pages stops processes that are
-writing large amounts of data from dirtying pages on other nodes. Zone
-reclaim will write out dirty pages if a zone fills up and so effectively
-throttle the process. This may decrease the performance of a single process
-since it cannot use all of system memory to buffer the outgoing writes
-anymore but it preserve the memory on other nodes so that the performance
-of other processes running on other nodes will not be affected.
+max_map_count:
-Allowing regular swap effectively restricts allocations to the local
-node unless explicitly overridden by memory policies or cpuset
-configurations.
+This file contains the maximum number of memory map areas a process
+may have. Memory map areas are used as a side-effect of calling
+malloc, directly by mmap and mprotect, and also when loading shared
+libraries.
-=============================================================
+While most applications need less than a thousand maps, certain
+programs, particularly malloc debuggers, may consume lots of them,
+e.g., up to one or two maps per allocation.
-min_unmapped_ratio:
+The default value is 65536.
-This is available only on NUMA kernels.
+==============================================================
-A percentage of the total pages in each zone. Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
+min_free_kbytes:
-The default is 1 percent.
+This is used to force the Linux VM to keep a minimum number
+of kilobytes free. The VM uses this number to compute a pages_min
+value for each lowmem zone in the system. Each lowmem zone gets
+a number of reserved free pages based proportionally on its size.
+
+Some minimal amount of memory is needed to satisfy PF_MEMALLOC
+allocations; if you set this to lower than 1024KB, your system will
+become subtly broken, and prone to deadlock under high loads.
+
+Setting this too high will OOM your machine instantly.
=============================================================
=============================================================
-panic_on_oom
+min_unmapped_ratio:
-This enables or disables panic on out-of-memory feature.
+This is available only on NUMA kernels.
-If this is set to 0, the kernel will kill some rogue process,
-called oom_killer. Usually, oom_killer can kill rogue processes and
-system will survive.
+A percentage of the total pages in each zone. Zone reclaim will only
+occur if more than this percentage of pages are file backed and unmapped.
+This is to insure that a minimal amount of local pages is still available for
+file I/O even if the node is overallocated.
-If this is set to 1, the kernel panics when out-of-memory happens.
-However, if a process limits using nodes by mempolicy/cpusets,
-and those nodes become memory exhaustion status, one process
-may be killed by oom-killer. No panic occurs in this case.
-Because other nodes' memory may be free. This means system total status
-may be not fatal yet.
+The default is 1 percent.
-If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+==============================================================
-The default value is 0.
-1 and 2 are for failover of clustering. Please select either
-according to your policy of failover.
+mmap_min_addr
-=============================================================
+This file indicates the amount of address space which a user process will
+be restricted from mmaping. Since kernel null dereference bugs could
+accidentally operate based on the information in the first couple of pages
+of memory userspace processes should not be allowed to write to them. By
+default this value is set to 0 and no protections will be enforced by the
+security module. Setting this value to something like 64k will allow the
+vast majority of applications to work correctly and provide defense in depth
+against future potential kernel bugs.
-oom_dump_tasks
+==============================================================
-Enables a system-wide task dump (excluding kernel threads) to be
-produced when the kernel performs an OOM-killing and includes such
-information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
-name. This is helpful to determine why the OOM killer was invoked
-and to identify the rogue task that caused it.
+nr_hugepages
-If this is set to zero, this information is suppressed. On very
-large systems with thousands of tasks it may not be feasible to dump
-the memory state information for each one. Such systems should not
-be forced to incur a performance penalty in OOM conditions when the
-information may not be desired.
+Change the minimum size of the hugepage pool.
-If this is set to non-zero, this information is shown whenever the
-OOM killer actually kills a memory-hogging task.
+See Documentation/vm/hugetlbpage.txt
-The default value is 0.
+==============================================================
-=============================================================
+nr_overcommit_hugepages
-oom_kill_allocating_task
+Change the maximum size of the hugepage pool. The maximum is
+nr_hugepages + nr_overcommit_hugepages.
-This enables or disables killing the OOM-triggering task in
-out-of-memory situations.
+See Documentation/vm/hugetlbpage.txt
-If this is set to zero, the OOM killer will scan through the entire
-tasklist and select a task based on heuristics to kill. This normally
-selects a rogue memory-hogging task that frees up a large amount of
-memory when killed.
+==============================================================
-If this is set to non-zero, the OOM killer simply kills the task that
-triggered the out-of-memory condition. This avoids the expensive
-tasklist scan.
+nr_pdflush_threads
-If panic_on_oom is selected, it takes precedence over whatever value
-is used in oom_kill_allocating_task.
+The current number of pdflush threads. This value is read-only.
+The value changes according to the number of dirty pages in the system.
-The default value is 0.
+When neccessary, additional pdflush threads are created, one per second, up to
+nr_pdflush_threads_max.
==============================================================
-mmap_min_addr
+nr_trim_pages
-This file indicates the amount of address space which a user process will
-be restricted from mmaping. Since kernel null dereference bugs could
-accidentally operate based on the information in the first couple of pages
-of memory userspace processes should not be allowed to write to them. By
-default this value is set to 0 and no protections will be enforced by the
-security module. Setting this value to something like 64k will allow the
-vast majority of applications to work correctly and provide defense in depth
-against future potential kernel bugs.
+This is available only on NOMMU kernels.
+
+This value adjusts the excess page trimming behaviour of power-of-2 aligned
+NOMMU mmap allocations.
+
+A value of 0 disables trimming of allocations entirely, while a value of 1
+trims excess pages aggressively. Any value >= 1 acts as the watermark where
+trimming of allocations is initiated.
+
+The default value is 1.
+
+See Documentation/nommu-mmap.txt for more information.
==============================================================
==============================================================
-nr_hugepages
+oom_dump_tasks
-Change the minimum size of the hugepage pool.
+Enables a system-wide task dump (excluding kernel threads) to be
+produced when the kernel performs an OOM-killing and includes such
+information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
+name. This is helpful to determine why the OOM killer was invoked
+and to identify the rogue task that caused it.
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, this information is suppressed. On very
+large systems with thousands of tasks it may not be feasible to dump
+the memory state information for each one. Such systems should not
+be forced to incur a performance penalty in OOM conditions when the
+information may not be desired.
+
+If this is set to non-zero, this information is shown whenever the
+OOM killer actually kills a memory-hogging task.
+
+The default value is 0.
==============================================================
-nr_overcommit_hugepages
+oom_kill_allocating_task
-Change the maximum size of the hugepage pool. The maximum is
-nr_hugepages + nr_overcommit_hugepages.
+This enables or disables killing the OOM-triggering task in
+out-of-memory situations.
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, the OOM killer will scan through the entire
+tasklist and select a task based on heuristics to kill. This normally
+selects a rogue memory-hogging task that frees up a large amount of
+memory when killed.
+
+If this is set to non-zero, the OOM killer simply kills the task that
+triggered the out-of-memory condition. This avoids the expensive
+tasklist scan.
+
+If panic_on_oom is selected, it takes precedence over whatever value
+is used in oom_kill_allocating_task.
+
+The default value is 0.
==============================================================
-nr_trim_pages
+overcommit_memory:
-This is available only on NOMMU kernels.
+This value contains a flag that enables memory overcommitment.
-This value adjusts the excess page trimming behaviour of power-of-2 aligned
-NOMMU mmap allocations.
+When this flag is 0, the kernel attempts to estimate the amount
+of free memory left when userspace requests more memory.
-A value of 0 disables trimming of allocations entirely, while a value of 1
-trims excess pages aggressively. Any value >= 1 acts as the watermark where
-trimming of allocations is initiated.
+When this flag is 1, the kernel pretends there is always enough
+memory until it actually runs out.
-The default value is 1.
+When this flag is 2, the kernel uses a "never overcommit"
+policy that attempts to prevent any overcommit of memory.
-See Documentation/nommu-mmap.txt for more information.
+This feature can be very useful because there are a lot of
+programs that malloc() huge amounts of memory "just-in-case"
+and don't use much of it.
+
+The default value is 0.
+
+See Documentation/vm/overcommit-accounting and
+security/commoncap.c::cap_vm_enough_memory() for more information.
+
+==============================================================
+
+overcommit_ratio:
+
+When overcommit_memory is set to 2, the committed address
+space is not permitted to exceed swap plus this percentage
+of physical RAM. See above.
+
+==============================================================
+
+page-cluster
+
+page-cluster controls the number of pages which are written to swap in
+a single attempt. The swap I/O size.
+
+It is a logarithmic value - setting it to zero means "1 page", setting
+it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
+
+The default value is three (eight pages at a time). There may be some
+small benefits in tuning this to a different value if your workload is
+swap-intensive.
+
+=============================================================
+
+panic_on_oom
+
+This enables or disables panic on out-of-memory feature.
+
+If this is set to 0, the kernel will kill some rogue process,
+called oom_killer. Usually, oom_killer can kill rogue processes and
+system will survive.
+
+If this is set to 1, the kernel panics when out-of-memory happens.
+However, if a process limits using nodes by mempolicy/cpusets,
+and those nodes become memory exhaustion status, one process
+may be killed by oom-killer. No panic occurs in this case.
+Because other nodes' memory may be free. This means system total status
+may be not fatal yet.
+
+If this is set to 2, the kernel panics compulsorily even on the
+above-mentioned.
+
+The default value is 0.
+1 and 2 are for failover of clustering. Please select either
+according to your policy of failover.
+
+=============================================================
+
+percpu_pagelist_fraction
+
+This is the fraction of pages at most (high mark pcp->high) in each zone that
+are allocated for each per cpu page list. The min value for this is 8. It
+means that we don't allow more than 1/8th of pages in each zone to be
+allocated in any single per_cpu_pagelist. This entry only changes the value
+of hot per cpu pagelists. User can specify a number like 100 to allocate
+1/100th of each zone to each per cpu page list.
+
+The batch value of each per cpu pagelist is also updated as a result. It is
+set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
+
+The initial value is zero. Kernel does not use this value at boot time to set
+the high water marks for each per cpu page list.
+
+==============================================================
+
+stat_interval
+
+The time interval between which vm statistics are updated. The default
+is 1 second.
+
+==============================================================
+
+swappiness
+
+This control is used to define how aggressive the kernel will swap
+memory pages. Higher values will increase agressiveness, lower values
+descrease the amount of swap.
+
+The default value is 60.
+
+==============================================================
+
+vfs_cache_pressure
+------------------
+
+Controls the tendency of the kernel to reclaim the memory which is used for
+caching of directory and inode objects.
+
+At the default value of vfs_cache_pressure=100 the kernel will attempt to
+reclaim dentries and inodes at a "fair" rate with respect to pagecache and
+swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
+to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
+causes the kernel to prefer to reclaim dentries and inodes.
+
+==============================================================
+
+zone_reclaim_mode:
+
+Zone_reclaim_mode allows someone to set more or less aggressive approaches to
+reclaim memory when a zone runs out of memory. If it is set to zero then no
+zone reclaim occurs. Allocations will be satisfied from other zones / nodes
+in the system.
+
+This is value ORed together of
+
+1 = Zone reclaim on
+2 = Zone reclaim writes dirty pages out
+4 = Zone reclaim swaps pages
+
+zone_reclaim_mode is set during bootup to 1 if it is determined that pages
+from remote zones will cause a measurable performance reduction. The
+page allocator will then reclaim easily reusable pages (those page
+cache pages that are currently not used) before allocating off node pages.
+
+It may be beneficial to switch off zone reclaim if the system is
+used for a file server and all of memory should be used for caching files
+from disk. In that case the caching effect is more important than
+data locality.
+
+Allowing zone reclaim to write out pages stops processes that are
+writing large amounts of data from dirtying pages on other nodes. Zone
+reclaim will write out dirty pages if a zone fills up and so effectively
+throttle the process. This may decrease the performance of a single process
+since it cannot use all of system memory to buffer the outgoing writes
+anymore but it preserve the memory on other nodes so that the performance
+of other processes running on other nodes will not be affected.
+
+Allowing regular swap effectively restricts allocations to the local
+node unless explicitly overridden by memory policies or cpuset
+configurations.
+
+============ End of Document =================================
Linux Magic System Request Key Hacks
Documentation for sysrq.c
-Last update: 2007-AUG-04
* What is the magic SysRq key?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
a lock (you are also in an interrupt handler, which means don't sleep!), so
you must call __handle_sysrq_nolock instead.
+* When I hit a SysRq key combination only the header appears on the console?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sysrq output is subject to the same console loglevel control as all
+other console output. This means that if the kernel was booted 'quiet'
+as is common on distro kernels the output may not appear on the actual
+console, even though it will appear in the dmesg buffer, and be accessible
+via the dmesg command and to the consumers of /proc/kmsg. As a specific
+exception the header line from the sysrq command is passed to all console
+consumers as if the current loglevel was maximum. If only the header
+is emitted it is almost certain that the kernel loglevel is too low.
+Should you require the output on the console channel then you will need
+to temporarily up the console loglevel using alt-sysrq-8 or:
+
+ echo 8 > /proc/sysrq-trigger
+
+Remember to return the loglevel to normal after triggering the sysrq
+command you are interested in.
+
* I have more questions, who can I ask?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And I'll answer any questions about the registration system you got, also
W: bluesmoke.sourceforge.net
S: Maintained
+EDAC-I5400
+P: Mauro Carvalho Chehab
+M: mchehab@redhat.com
+L: bluesmoke-devel@lists.sourceforge.net
+W: bluesmoke.sourceforge.net
+S: Maintained
+
EDAC-I82975X
P: Ranganathan Desikan
P: Arvind R.
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
+FREEZER
+P: Pavel Machek
+M: pavel@suse.cz
+P: Rafael J. Wysocki
+M: rjw@sisk.pl
+L: linux-pm@lists.linux-foundation.org
+S: Supported
+
FTRACE
P: Steven Rostedt
M: rostedt@goodmis.org
XFS FILESYSTEM
P: Silicon Graphics Inc
-P: Tim Shimmin
+P: Bill O'Donnell
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
-T: git git://oss.sgi.com:8090/xfs/xfs-2.6.git
+T: git://oss.sgi.com/xfs/xfs.git
S: Supported
XILINX SYSTEMACE DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
+config HAVE_SYSCALL_WRAPPERS
+ bool
+
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
unifdef-y += fpu.h
unifdef-y += sysinfo.h
unifdef-y += compiler.h
-unifdef-y += swab.h
#ifndef _ALPHA_BYTEORDER_H
#define _ALPHA_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ALPHA_BYTEORDER_H */
struct pci_ops;
struct pci_controller;
struct _alpha_agp_info;
+struct rtc_time;
struct alpha_machine_vector
{
struct _alpha_agp_info *(*agp_info)(void);
+ unsigned int (*rtc_get_time)(struct rtc_time *);
+ int (*rtc_set_time)(struct rtc_time *);
+
const char *vector_name;
/* NUMA information */
free_page((unsigned long)pmd);
}
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ return pte;
+}
static inline void
pte_free_kernel(struct mm_struct *mm, pte_t *pte)
#ifndef _ALPHA_RTC_H
#define _ALPHA_RTC_H
-/*
- * Alpha uses the default access methods for the RTC.
- */
+#if defined(CONFIG_ALPHA_GENERIC)
+# define get_rtc_time alpha_mv.rtc_get_time
+# define set_rtc_time alpha_mv.rtc_set_time
+#else
+# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
+# define get_rtc_time marvel_get_rtc_time
+# define set_rtc_time marvel_set_rtc_time
+# endif
+#endif
#include <asm-generic/rtc.h>
--- /dev/null
+vmlinux.lds
rtc_access.data = bcd2bin(b);
rtc_access.function = 0x48 + !write; /* GET/PUT_TOY */
-#ifdef CONFIG_SMP
- if (smp_processor_id() != boot_cpuid)
- smp_call_function_single(boot_cpuid,
- __marvel_access_rtc,
- &rtc_access, 1);
- else
- __marvel_access_rtc(&rtc_access);
-#else
__marvel_access_rtc(&rtc_access);
-#endif
+
ret = bin2bcd(rtc_access.data);
break;
.end sys_getxpid
.align 4
- .globl sys_pipe
- .ent sys_pipe
-sys_pipe:
+ .globl sys_alpha_pipe
+ .ent sys_alpha_pipe
+sys_alpha_pipe:
lda $sp, -16($sp)
stq $26, 0($sp)
.prologue 0
stq $1, 80+16($sp)
1: lda $sp, 16($sp)
ret
-.end sys_pipe
+.end sys_alpha_pipe
.align 4
.globl sys_execve
{
long i;
+ if (NR_IRQS <= 16)
+ return;
for (i = 16; i < max; ++i) {
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
#define CAT1(x,y) x##y
#define CAT(x,y) CAT1(x,y)
-#define DO_DEFAULT_RTC .rtc_port = 0x70
+#define DO_DEFAULT_RTC \
+ .rtc_port = 0x70, \
+ .rtc_get_time = common_get_rtc_time, \
+ .rtc_set_time = common_set_rtc_time
#define DO_EV4_MMU \
.max_asn = EV4_MAX_ASN, \
extern irqreturn_t timer_interrupt(int irq, void *dev);
extern void common_init_rtc(void);
extern unsigned long est_cycle_freq;
+extern unsigned int common_get_rtc_time(struct rtc_time *time);
+extern int common_set_rtc_time(struct rtc_time *time);
/* smc37c93x.c */
extern void SMC93x_Init(void);
.machine_check = jensen_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.rtc_port = 0x170,
+ .rtc_get_time = common_get_rtc_time,
+ .rtc_set_time = common_set_rtc_time,
.nr_irqs = 16,
.device_interrupt = jensen_device_interrupt,
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include <asm/vga.h>
+#include <asm/rtc.h>
#include "proto.h"
#include "err_impl.h"
init_rtc_irq();
}
+struct marvel_rtc_time {
+ struct rtc_time *time;
+ int retval;
+};
+
+#ifdef CONFIG_SMP
+static void
+smp_get_rtc_time(void *data)
+{
+ struct marvel_rtc_time *mrt = data;
+ mrt->retval = __get_rtc_time(mrt->time);
+}
+
+static void
+smp_set_rtc_time(void *data)
+{
+ struct marvel_rtc_time *mrt = data;
+ mrt->retval = __set_rtc_time(mrt->time);
+}
+#endif
+
+static unsigned int
+marvel_get_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+ struct marvel_rtc_time mrt;
+
+ if (smp_processor_id() != boot_cpuid) {
+ mrt.time = time;
+ smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
+ return mrt.retval;
+ }
+#endif
+ return __get_rtc_time(time);
+}
+
+static int
+marvel_set_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+ struct marvel_rtc_time mrt;
+
+ if (smp_processor_id() != boot_cpuid) {
+ mrt.time = time;
+ smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
+ return mrt.retval;
+ }
+#endif
+ return __set_rtc_time(time);
+}
+
static void
marvel_smp_callin(void)
{
struct alpha_machine_vector marvel_ev7_mv __initmv = {
.vector_name = "MARVEL/EV7",
DO_EV7_MMU,
- DO_DEFAULT_RTC,
+ .rtc_port = 0x70,
+ .rtc_get_time = marvel_get_rtc_time,
+ .rtc_set_time = marvel_set_rtc_time,
DO_MARVEL_IO,
.machine_check = marvel_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
IRONGATE0->pci_mem = pci_mem;
pci_bus_assign_resources(bus);
+
+ /* pci_common_swizzle() relies on bus->self being NULL
+ for the root bus, so just clear it. */
+ bus->self = NULL;
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
}
.quad sys_setpgid
.quad alpha_ni_syscall /* 40 */
.quad sys_dup
- .quad sys_pipe
+ .quad sys_alpha_pipe
.quad osf_set_program_attributes
.quad alpha_ni_syscall
.quad sys_open /* 45 */
#include <asm/io.h>
#include <asm/hwrpb.h>
#include <asm/8253pit.h>
+#include <asm/rtc.h>
#include <linux/mc146818rtc.h>
#include <linux/time.h>
init_rtc_irq();
}
+unsigned int common_get_rtc_time(struct rtc_time *time)
+{
+ return __get_rtc_time(time);
+}
+
+int common_set_rtc_time(struct rtc_time *time)
+{
+ return __set_rtc_time(time);
+}
/* Validate a computed cycle counter result against the known bounds for
the given processor core. There's too much brokenness in the way of
return ret;
}
-pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
- pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
- return pte;
-}
-
/*
* BAD_PAGE is the page that is used for page faults when linux
include include/asm-generic/Kbuild.asm
unifdef-y += hwcap.h
-unifdef-y += swab.h
#ifndef __ASM_ARM_BYTEORDER_H
#define __ASM_ARM_BYTEORDER_H
-#include <asm/swab.h>
-
#ifdef __ARMEB__
#include <linux/byteorder/big_endian.h>
#else
CALL(sys_uselib)
CALL(sys_swapon)
CALL(sys_reboot)
- CALL(OBSOLETE(old_readdir)) /* used by libc4 */
+ CALL(OBSOLETE(sys_old_readdir)) /* used by libc4 */
/* 90 */ CALL(OBSOLETE(old_mmap)) /* used by libc4 */
CALL(sys_munmap)
CALL(sys_truncate)
#include <linux/err.h>
#include <linux/io.h>
-#include <mach/imx-regs.h>
+#include <mach/hardware.h>
/*
* Very simple approach: We can't disable clocks, so we do
imx_mmc_device.dev.platform_data = info;
}
-static struct imxfb_mach_info imx_fb_info;
+static struct imx_fb_platform_data imx_fb_info;
-void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
+void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
{
- memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
+ memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
}
static struct resource imxfb_resources[] = {
#define TSTAT_CAPT (1<<1)
#define TSTAT_COMP (1<<0)
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y) ( (y) & 0x1ff )
-
-#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x) ( (x) & 0x3ff )
-
-#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1 (1<<31)
-#define CPOS_CC0 (1<<30)
-#define CPOS_OP (1<<28)
-#define CPOS_CXP(x) (((x) & 3ff) << 16)
-#define CPOS_CYP(y) ((y) & 0x1ff)
-
-#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN (1<<31)
-#define LCWHB_CW(w) (((w) & 0x1f) << 24)
-#define LCWHB_CH(h) (((h) & 0x1f) << 16)
-#define LCWHB_BD(x) ((x) & 0xff)
-
-#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT (1<<31)
-#define PCR_COLOR (1<<30)
-#define PCR_PBSIZ_1 (0<<28)
-#define PCR_PBSIZ_2 (1<<28)
-#define PCR_PBSIZ_4 (2<<28)
-#define PCR_PBSIZ_8 (3<<28)
-#define PCR_BPIX_1 (0<<25)
-#define PCR_BPIX_2 (1<<25)
-#define PCR_BPIX_4 (2<<25)
-#define PCR_BPIX_8 (3<<25)
-#define PCR_BPIX_12 (4<<25)
-#define PCR_BPIX_16 (4<<25)
-#define PCR_PIXPOL (1<<24)
-#define PCR_FLMPOL (1<<23)
-#define PCR_LPPOL (1<<22)
-#define PCR_CLKPOL (1<<21)
-#define PCR_OEPOL (1<<20)
-#define PCR_SCLKIDLE (1<<19)
-#define PCR_END_SEL (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS (1<<16)
-#define PCR_ACD_SEL (1<<15)
-#define PCR_ACD(x) (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL (1<<7)
-#define PCR_SHARP (1<<6)
-#define PCR_PCD(x) ((x) & 0x3f)
-
-#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x) ((x) & 1f)
-
-#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x) (((x) & 0xf))
-
-#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK (1<<15)
-#define PWMR_SCR1 (1<<10)
-#define PWMR_SCR0 (1<<9)
-#define PWMR_CC_EN (1<<8)
-#define PWMR_PW(x) ((x) & 0xff)
-
-#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST (1<<31)
-#define DMACR_HM(x) (((x) & 0xf) << 16)
-#define DMACR_TM(x) ((x) &0xf)
-
-#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN (1<<1)
-#define RMCR_SELF_REF (1<<0)
-
-#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN (1<<2)
-#define LCDICR_INT_CON (1)
-
-#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF (1<<1)
-#define LCDISR_BOF (1<<0)
-
#endif // _IMX_REGS_H
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
+#include <mach/map.h>
#include "cpu.h"
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <mach/system.h>
#include <mach/map.h>
#include <mach/regs-timer.h>
EXPORT_SYMBOL(__cpuc_flush_user_all);
EXPORT_SYMBOL(__cpuc_flush_user_range);
EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(dmac_inv_range); /* because of flush_ioremap_region() */
#else
EXPORT_SYMBOL(cpu_cache);
#endif
include include/asm-generic/Kbuild.asm
-header-y += swab.h
header-y += cachectl.h
#ifndef __ASM_AVR32_BYTEORDER_H
#define __ASM_AVR32_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* __ASM_AVR32_BYTEORDER_H */
include include/asm-generic/Kbuild.asm
unifdef-y += fixed_code.h
-unifdef-y += swab.h
#ifndef _BLACKFIN_BYTEORDER_H
#define _BLACKFIN_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _BLACKFIN_BYTEORDER_H */
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
-#ifndef _CRIS_ARCH_BYTEORDER_H
-#define _CRIS_ARCH_BYTEORDER_H
+#ifndef _CRIS_ARCH_SWAB_H
+#define _CRIS_ARCH_SWAB_H
#include <asm/types.h>
#include <linux/compiler.h>
+#define __SWAB_64_THRU_32__
+
/* we just define these two (as we can do the swap in a single
* asm instruction in CRIS) and the arch-independent files will put
* them together into ntohl etc.
*/
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
-
+
return(x);
}
+#define __arch_swab32 __arch_swab32
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__ ("swapb %0" : "=r" (x) : "0" (x));
-
+
return(x);
}
+#define __arch_swab16 __arch_swab16
#endif
+++ /dev/null
-#ifndef _ASM_CRIS_ARCH_BYTEORDER_H
-#define _ASM_CRIS_ARCH_BYTEORDER_H
-
-#include <asm/types.h>
-
-static inline __const__ __u32
-___arch__swab32(__u32 x)
-{
- __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
- return (x);
-}
-
-static inline __const__ __u16
-___arch__swab16(__u16 x)
-{
- __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
- return (x);
-}
-
-#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */
--- /dev/null
+#ifndef _ASM_CRIS_ARCH_SWAB_H
+#define _ASM_CRIS_ARCH_SWAB_H
+
+#include <asm/types.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __const__ __u32
+__arch_swab32(__u32 x)
+{
+ __asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
+ return (x);
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __const__ __u16
+__arch_swab16(__u16 x)
+{
+ __asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
+ return (x);
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _ASM_CRIS_ARCH_SWAB_H */
#ifndef _CRIS_BYTEORDER_H
#define _CRIS_BYTEORDER_H
-#ifdef __GNUC__
-
-#ifdef __KERNEL__
-#include <arch/byteorder.h>
-
-/* defines are necessary because the other files detect the presence
- * of a defined __arch_swab32, not an inline
- */
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#endif /* __KERNEL__ */
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
#include <linux/byteorder/little_endian.h>
#endif
--- /dev/null
+#ifndef _CRIS_SWAB_H
+#define _CRIS_SWAB_H
+
+#ifdef __KERNEL__
+#include <arch/swab.h>
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_SWAB_H */
include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
#ifndef _H8300_BYTEORDER_H
#define _H8300_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _H8300_BYTEORDER_H */
.long SYMBOL_NAME(sys_uselib)
.long SYMBOL_NAME(sys_swapon)
.long SYMBOL_NAME(sys_reboot)
- .long SYMBOL_NAME(old_readdir)
+ .long SYMBOL_NAME(sys_old_readdir)
.long SYMBOL_NAME(old_mmap) /* 90 */
.long SYMBOL_NAME(sys_munmap)
.long SYMBOL_NAME(sys_truncate)
select ACPI if (!IA64_HP_SIM)
select PM if (!IA64_HP_SIM)
select ARCH_SUPPORTS_MSI
+ select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
data8 sys_mkdir
data8 sys_rmdir /* 40 */
data8 sys_dup
- data8 sys_pipe
+ data8 sys_ia64_pipe
data8 compat_sys_times
data8 sys_ni_syscall /* old prof syscall holder */
data8 sys32_brk /* 45 */
unifdef-y += intrinsics.h
unifdef-y += perfmon.h
unifdef-y += ustack.h
-unifdef-y += swab.h
#ifndef _ASM_IA64_BYTEORDER_H
#define _ASM_IA64_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ASM_IA64_BYTEORDER_H */
#include <linux/scatterlist.h>
#include <asm/swiotlb.h>
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
struct dma_mapping_ops {
int (*mapping_error)(struct device *dev,
dma_addr_t dma_addr);
typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef u64 ia64_mv_dma_get_required_mask (struct device *);
/*
* WARNING: The legacy I/O space is _architected_. Platforms are
# define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
# define platform_dma_mapping_error ia64_mv.dma_mapping_error
# define platform_dma_supported ia64_mv.dma_supported
+# define platform_dma_get_required_mask ia64_mv.dma_get_required_mask
# define platform_irq_to_vector ia64_mv.irq_to_vector
# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq
# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem
ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
ia64_mv_dma_mapping_error *dma_mapping_error;
ia64_mv_dma_supported *dma_supported;
+ ia64_mv_dma_get_required_mask *dma_get_required_mask;
ia64_mv_irq_to_vector *irq_to_vector;
ia64_mv_local_vector_to_irq *local_vector_to_irq;
ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
platform_dma_sync_sg_for_device, \
platform_dma_mapping_error, \
platform_dma_supported, \
+ platform_dma_get_required_mask, \
platform_irq_to_vector, \
platform_local_vector_to_irq, \
platform_pci_get_legacy_mem, \
#ifndef platform_dma_supported
# define platform_dma_supported swiotlb_dma_supported
#endif
+#ifndef platform_dma_get_required_mask
+# define platform_dma_get_required_mask ia64_dma_get_required_mask
+#endif
#ifndef platform_irq_to_vector
# define platform_irq_to_vector __ia64_irq_to_vector
#endif
extern ia64_mv_send_ipi_t ia64_send_ipi;
extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_dma_get_required_mask ia64_dma_get_required_mask;
extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
extern ia64_mv_dma_sync_sg_for_device sn_dma_sync_sg_for_device;
extern ia64_mv_dma_mapping_error sn_dma_mapping_error;
extern ia64_mv_dma_supported sn_dma_supported;
+extern ia64_mv_dma_get_required_mask sn_dma_get_required_mask;
extern ia64_mv_migrate_t sn_migrate;
extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event;
extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq;
#define platform_dma_sync_sg_for_device sn_dma_sync_sg_for_device
#define platform_dma_mapping_error sn_dma_mapping_error
#define platform_dma_supported sn_dma_supported
+#define platform_dma_get_required_mask sn_dma_get_required_mask
#define platform_migrate sn_migrate
#define platform_kernel_launch_event sn_kernel_launch_event
#ifdef CONFIG_PCI_MSI
struct sigaction;
long sys_execve(char __user *filename, char __user * __user *argv,
char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
+asmlinkage long sys_ia64_pipe(void);
asmlinkage long sys_rt_sigaction(int sig,
const struct sigaction __user *act,
struct sigaction __user *oact,
data8 sys_mkdir // 1055
data8 sys_rmdir
data8 sys_dup
- data8 sys_pipe
+ data8 sys_ia64_pipe
data8 sys_times
data8 ia64_brk // 1060
data8 sys_setgid
return 1;
ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
ia64_psr(regs)->ri = p->ainsn.slot;
* and r9) as this is faster than doing a copy_to_user().
*/
asmlinkage long
-sys_pipe (void)
+sys_ia64_pipe (void)
{
struct pt_regs *regs = task_pt_regs(current);
int fd[2];
* (i.e. don't allow attacker to fill up logs with unaligned accesses).
*/
int no_unaligned_warning;
+int unaligned_dump_stack;
static int noprint_warning;
/*
}
}
} else {
- if (within_logging_rate_limit())
+ if (within_logging_rate_limit()) {
printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
ifa, regs->cr_iip + ipsr->ri);
+ if (unaligned_dump_stack)
+ dump_stack();
+ }
set_fs(KERNEL_DS);
}
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/bootmem.h>
#include <asm/machvec.h>
#include <asm/page.h>
pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
}
+u64 ia64_dma_get_required_mask(struct device *dev)
+{
+ u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
+ u32 high_totalram = ((max_pfn - 1) >> (32 - PAGE_SHIFT));
+ u64 mask;
+
+ if (!high_totalram) {
+ /* convert to mask just covering totalram */
+ low_totalram = (1 << (fls(low_totalram) - 1));
+ low_totalram += low_totalram - 1;
+ mask = low_totalram;
+ } else {
+ high_totalram = (1 << (fls(high_totalram) - 1));
+ high_totalram += high_totalram - 1;
+ mask = (((u64)high_totalram) << 32) + 0xffffffff;
+ }
+ return mask;
+}
+EXPORT_SYMBOL_GPL(ia64_dma_get_required_mask);
+
+u64 dma_get_required_mask(struct device *dev)
+{
+ return platform_dma_get_required_mask(dev);
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
static int __init pcibios_init(void)
{
set_pci_cacheline_size();
}
EXPORT_SYMBOL(sn_dma_mapping_error);
+u64 sn_dma_get_required_mask(struct device *dev)
+{
+ return DMA_64BIT_MASK;
+}
+EXPORT_SYMBOL_GPL(sn_dma_get_required_mask);
+
char *sn_pci_get_legacy_mem(struct pci_bus *bus)
{
if (!SN_PCIBUS_BUSSOFT(bus))
blocked = stolentick;
if (stolen > 0 || blocked > 0) {
- account_steal_time(NULL, jiffies_to_cputime(stolen));
- account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+ account_steal_ticks(stolen);
+ account_idle_ticks(blocked);
run_local_timers();
if (rcu_pending(cpu))
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
#ifndef _M68KNOMMU_BYTEORDER_H
#define _M68KNOMMU_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _M68KNOMMU_BYTEORDER_H */
.long sys_uselib
.long sys_ni_syscall /* sys_swapon */
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
header-y += cachectl.h sgidefs.h sysmips.h
-header-y += swab.h
#ifndef _ASM_BYTEORDER_H
#define _ASM_BYTEORDER_H
-#include <asm/swab.h>
-
#if defined(__MIPSEB__)
#include <linux/byteorder/big_endian.h>
#elif defined(__MIPSEL__)
sys sys_uselib 1
sys sys_swapon 2
sys sys_reboot 3
- sys old_readdir 3
+ sys sys_old_readdir 3
sys old_mmap 6 /* 4090 */
sys sys_munmap 2
sys sys_truncate 2
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
include include/asm-generic/Kbuild.asm
unifdef-y += pdc.h
-unifdef-y += swab.h
#ifndef _PARISC_BYTEORDER_H
#define _PARISC_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _PARISC_BYTEORDER_H */
select HAVE_DMA_ATTRS if PPC64
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_OPROFILE
+ select HAVE_SYSCALL_WRAPPERS if PPC64
config EARLY_PRINTK
bool
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <25 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <27 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <26 2>;
+ interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <27 2>;
+ interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_STORAGE=m
+CONFIG_PS3_DISK=m
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_PPC_CELLEB=y
+CONFIG_PPC_CELL_QPACE=y
#
# Cell Broadband Engine options
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=m
+CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_PS3=m
+CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_PS3=m
+CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
unifdef-y += termios.h
unifdef-y += types.h
unifdef-y += unistd.h
-unifdef-y += swab.h
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _ASM_POWERPC_BYTEORDER_H */
int (*map)(struct ps3_dma_region *,
unsigned long virt_addr,
unsigned long len,
- unsigned long *bus_addr,
+ dma_addr_t *bus_addr,
u64 iopte_pp);
int (*unmap)(struct ps3_dma_region *,
- unsigned long bus_addr,
+ dma_addr_t bus_addr,
unsigned long len);
};
/**
int ps3_dma_region_create(struct ps3_dma_region *r);
int ps3_dma_region_free(struct ps3_dma_region *r);
int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
- unsigned long len, unsigned long *bus_addr,
+ unsigned long len, dma_addr_t *bus_addr,
u64 iopte_pp);
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr,
unsigned long len);
/* mmio routines */
#define UCC_GETH_UCCE_RXF1 0x00000002
#define UCC_GETH_UCCE_RXF0 0x00000001
-/* UPSMR, when used as a UART */
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
#define UCC_UART_UPSMR_FLC 0x8000
#define UCC_UART_UPSMR_SL 0x4000
#define UCC_UART_UPSMR_CL_MASK 0x3000
#define UCC_UART_UPSMR_TPM_EVEN 0x0002
#define UCC_UART_UPSMR_TPM_HIGH 0x0003
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE 0x80000000
+#define UCC_GETH_UPSMR_PTPE 0x40000000
+#define UCC_GETH_UPSMR_ECM 0x04000000
+#define UCC_GETH_UPSMR_HSE 0x02000000
+#define UCC_GETH_UPSMR_PRO 0x00400000
+#define UCC_GETH_UPSMR_CAP 0x00200000
+#define UCC_GETH_UPSMR_RSH 0x00100000
+#define UCC_GETH_UPSMR_RPM 0x00080000
+#define UCC_GETH_UPSMR_R10M 0x00040000
+#define UCC_GETH_UPSMR_RLPB 0x00020000
+#define UCC_GETH_UPSMR_TBIM 0x00010000
+#define UCC_GETH_UPSMR_RES1 0x00002000
+#define UCC_GETH_UPSMR_RMM 0x00001000
+#define UCC_GETH_UPSMR_CAM 0x00000400
+#define UCC_GETH_UPSMR_BRO 0x00000200
+
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
*/
#define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */
/* Buffer size for ppc_rtas system call. */
#define RTAS_RMOBUF_MAX (64 * 1024)
SYSCALL(uselib)
SYSCALL(swapon)
SYSCALL(reboot)
-SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
SYSCALL_SPU(mmap)
SYSCALL_SPU(munmap)
SYSCALL_SPU(truncate)
#ifndef _ASM_POWERPC_TYPES_H
#define _ASM_POWERPC_TYPES_H
-#ifdef __powerpc64__
+/*
+ * This is here because we used to use l64 for 64bit powerpc
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ */
+#if defined(__powerpc64__) && !defined(__KERNEL__)
# include <asm-generic/int-l64.h>
#else
# include <asm-generic/int-ll64.h>
#include "head_booke.h"
#endif
+#if defined(CONFIG_FSL_BOOKE)
+#include "../mm/mmu_decl.h"
+#endif
+
int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(PGD_T_LOG2, PGD_T_LOG2);
DEFINE(PTE_T_LOG2, PTE_T_LOG2);
#endif
+#ifdef CONFIG_FSL_BOOKE
+ DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+#endif
#ifdef CONFIG_KVM_EXIT_TIMING
DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
struct cache *next_local; /* next cache of >= level */
};
-static DEFINE_PER_CPU(struct cache_dir *, cache_dir);
+static DEFINE_PER_CPU(struct cache_dir *, cache_dir_pcpu);
/* traversal/modification of this list occurs only at cpu hotplug time;
* access is serialized by cpu hotplug locking
cache_dir->kobj = kobj;
- WARN_ON_ONCE(per_cpu(cache_dir, cpu_id) != NULL);
+ WARN_ON_ONCE(per_cpu(cache_dir_pcpu, cpu_id) != NULL);
- per_cpu(cache_dir, cpu_id) = cache_dir;
+ per_cpu(cache_dir_pcpu, cpu_id) = cache_dir;
return cache_dir;
err:
/* Prevent userspace from seeing inconsistent state - remove
* the sysfs hierarchy first */
- cache_dir = per_cpu(cache_dir, cpu_id);
+ cache_dir = per_cpu(cache_dir_pcpu, cpu_id);
/* careful, sysfs population may have failed */
if (cache_dir)
remove_cache_dir(cache_dir);
- per_cpu(cache_dir, cpu_id) = NULL;
+ per_cpu(cache_dir_pcpu, cpu_id) = NULL;
/* clear the CPU's bit in its cache chain, possibly freeing
* cache objects */
"Warning: IOMMU offset too big for device mask\n");
if (tbl)
printk(KERN_INFO
- "mask: 0x%08lx, table offset: 0x%08lx\n",
+ "mask: 0x%08llx, table offset: 0x%08lx\n",
mask, tbl->it_offset);
else
- printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+ printk(KERN_INFO "mask: 0x%08llx, table unavailable\n",
mask);
return 0;
} else
/* turn on 64-bit mode */
bl .enable_64b_mode
+ li r0,0
+ mfspr r3,SPRN_HID4
+ rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
+ sync
+ mtspr SPRN_HID4,r3
+ isync
+ sync
+ slbia
+
/* get TOC pointer (real address) */
bl .relative_toc
#endif
#endif
- mfspr r3,SPRN_TLB1CFG
- andi. r3,r3,0xfff
- lis r4,num_tlbcam_entries@ha
- stw r3,num_tlbcam_entries@l(r4)
/*
* Decide what sort of machine this is and initialize the MMU.
*/
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
#ifdef CONFIG_PPC_E500MC
- EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD)
#endif
/* Debug Interrupt */
_GLOBAL(loadcam_entry)
lis r4,TLBCAM@ha
addi r4,r4,TLBCAM@l
- mulli r5,r3,20
+ mulli r5,r3,TLBCAM_SIZE
add r3,r5,r4
lwz r4,0(r3)
mtspr SPRN_MAS0,r4
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_free: invalid entry\n");
printk(KERN_INFO "\tentry = 0x%lx\n", entry);
- printk(KERN_INFO "\tdma_addr = 0x%lx\n", (u64)dma_addr);
- printk(KERN_INFO "\tTable = 0x%lx\n", (u64)tbl);
- printk(KERN_INFO "\tbus# = 0x%lx\n", (u64)tbl->it_busno);
- printk(KERN_INFO "\tsize = 0x%lx\n", (u64)tbl->it_size);
- printk(KERN_INFO "\tstartOff = 0x%lx\n", (u64)tbl->it_offset);
- printk(KERN_INFO "\tindex = 0x%lx\n", (u64)tbl->it_index);
+ printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr);
+ printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl);
+ printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno);
+ printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size);
+ printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset);
+ printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index);
WARN_ON(1);
}
return;
if (rc)
return;
- seq_printf(m, "partition_entitled_capacity=%ld\n",
+ seq_printf(m, "partition_entitled_capacity=%lld\n",
ppp_data.entitlement);
seq_printf(m, "group=%d\n", ppp_data.group_num);
seq_printf(m, "system_active_processors=%d\n",
ppp_data.unallocated_weight);
seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
seq_printf(m, "capped=%d\n", ppp_data.capped);
- seq_printf(m, "unallocated_capacity=%ld\n",
+ seq_printf(m, "unallocated_capacity=%lld\n",
ppp_data.unallocated_entitlement);
}
} else
return -EINVAL;
- pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+ pr_debug("%s: current_entitled = %llu, current_weight = %u\n",
__func__, ppp_data.entitlement, ppp_data.weight);
- pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+ pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
__func__, new_entitled, new_weight);
retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
__func__, mpp_data.entitled_mem, mpp_data.mem_weight);
- pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+ pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
__func__, new_entitled, new_weight);
rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
KDUMP_KERNELBASE);
crashk_res.start = KDUMP_KERNELBASE;
+#else
+ if (!crashk_res.start) {
+ /*
+ * unspecified address, choose a region of specified size
+ * can overlap with initrd (ignoring corruption when retained)
+ * ppc64 requires kernel and some stacks to be in first segemnt
+ */
+ crashk_res.start = KDUMP_KERNELBASE;
+ }
+
+ crash_base = PAGE_ALIGN(crashk_res.start);
+ if (crash_base != crashk_res.start) {
+ printk("Crash kernel base must be aligned to 0x%lx\n",
+ PAGE_SIZE);
+ crashk_res.start = crash_base;
+ }
+
#endif
crash_size = PAGE_ALIGN(crash_size);
crashk_res.end = crashk_res.start + crash_size - 1;
+ /* The crash region must not overlap the current kernel */
+ if (overlaps_crashkernel(__pa(_stext), _end - _stext)) {
+ printk(KERN_WARNING
+ "Crash kernel can not overlap current kernel\n");
+ crashk_res.start = crashk_res.end = 0;
+ return;
+ }
+
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
if (bus->self) {
pr_debug("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
- pr_debug(" virt=0x%016lx...0x%016lx\n",
+ pr_debug(" virt=0x%016llx...0x%016llx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
hose->io_base_phys - phys_page);
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
- pr_debug(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
+ pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
pr_debug(" size=0x%016lx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
- pr_debug(" hose->io_resource=0x%016lx...0x%016lx\n",
+ pr_debug(" hose->io_resource=0x%016llx...0x%016llx\n",
hose->io_resource.start, hose->io_resource.end);
return 0;
{
u32 *slb_size_ptr;
+ slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
+ if (slb_size_ptr != NULL) {
+ mmu_slb_size = *slb_size_ptr;
+ return;
+ }
slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
if (slb_size_ptr != NULL) {
mmu_slb_size = *slb_size_ptr;
printk("Starting Linux PPC64 %s\n", init_utsname()->version);
printk("-----------------------------------------------------\n");
- printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
+ printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
+ printk("physicalMemorySize = 0x%llx\n", lmb_phys_mem_size());
if (ppc64_caches.dline_size != 0x80)
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
- limit = min(0x10000000UL, lmb.rmo_size);
+ limit = min(0x10000000ULL, lmb.rmo_size);
for_each_possible_cpu(i) {
unsigned long sp;
/* The dummy segment contents for the bug workaround mentioned above
near PHDRS. */
.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
- LONG(0xf177)
+ LONG(0)
+ LONG(0)
+ LONG(0)
} :kernel :dummy
/*
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
static unsigned long __cam0, __cam1, __cam2;
#define NUM_TLBCAMS (16)
-struct tlbcam {
- u32 MAS0;
- u32 MAS1;
- u32 MAS2;
- u32 MAS3;
- u32 MAS7;
-} TLBCAM[NUM_TLBCAMS];
+struct tlbcam TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
unsigned long start;
#endif /* CONFIG_PPC_MMU_NOHASH */
#ifdef CONFIG_PPC32
+
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ u32 MAS2;
+ u32 MAS3;
+ u32 MAS7;
+};
+
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
extern void setbat(int index, unsigned long virt, phys_addr_t phys,
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
#endif
extern unsigned long ioremap_bot;
unsigned long len)
{
struct slice_mask mask, available;
+ unsigned int psize = mm->context.user_psize;
mask = slice_range_to_mask(addr, len);
- available = slice_mask_for_size(mm, mm->context.user_psize);
+ available = slice_mask_for_size(mm, psize);
+#ifdef CONFIG_PPC_64K_PAGES
+ /* We need to account for 4k slices too */
+ if (psize == MMU_PAGE_64K) {
+ struct slice_mask compat_mask;
+ compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+ or_mask(available, compat_mask);
+ }
+#endif
#if 0 /* too verbose */
slice_dbg("is_hugepage_only_range(mm=%p, addr=%lx, len=%lx)\n",
paca[cpu].stab_addr = newstab;
paca[cpu].stab_real = virt_to_abs(newstab);
- printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
- "virtual, 0x%lx absolute\n",
+ printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
+ "virtual, 0x%llx absolute\n",
cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
}
}
for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
/* counters are 40 bit. Move to cputable at some point? */
reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
- pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+ pr_debug("reset_value for pmc%u inited to 0x%llx\n",
pmc, reset_value[pmc]);
}
oprofile_running = 1;
- pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+ pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
return 0;
}
oprofile_running = 0;
- pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+ pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
}
/* handle the perfmon overflow vector */
int dev_match = 0;
int id_match = 0;
- if (dev == NULL && id == NULL)
+ if (dev == NULL || id == NULL)
return NULL;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
- if (dev && dev == p->dev)
+ if (dev == p->dev)
dev_match++;
if (strcmp(id, p->name) == 0)
id_match++;
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
- unsigned int ret;
return (in_be32(®s->status) & (1 << (31 - 23))) ? 1 : 0;
-
- return ret;
}
static void
static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
{
+ struct irq_desc *desc = get_irq_desc(virq);
u32 ctrl_reg, type;
int irq;
int l2irq;
type = 0;
}
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+
ctrl_reg = in_be32(&intr->ctrl);
ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
ctrl_reg |= (type << (22 - (l2irq * 2)));
}
static struct irq_chip mpc52xx_extirq_irqchip = {
- .typename = " MPC52xx IRQ[0-3] ",
+ .typename = "MPC52xx External",
.mask = mpc52xx_extirq_mask,
.unmask = mpc52xx_extirq_unmask,
.ack = mpc52xx_extirq_ack,
#
obj-y := misc.o usb.o
obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o
obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
chip-selects, Ethernet/USB PHY's power and various other small
on-board peripherals.
+config MCU_MPC8349EMITX
+ tristate "MPC8349E-mITX MCU driver"
+ depends on I2C && PPC_83xx
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Say Y here to enable soft power-off functionality on the Freescale
+ boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+ also register MCU GPIOs with the generic GPIO API, so you'll able
+ to use MCU pins as GPIOs.
+
endmenu
err = beat_downcount_of_interrupt(irq_plug);
if (err != 0) {
if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
- panic("Failed to downcount IRQ! Error = %16lx", err);
+ panic("Failed to downcount IRQ! Error = %16llx", err);
printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
}
hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
if (!hose->cfg_addr)
goto error;
- pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
+ pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
if (of_address_to_resource(node, 2, &r))
hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
if (!hose->cfg_data)
goto error;
- pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
+ pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
hose->ops = &celleb_epci_ops;
*/
if (np && size < lmb_end_of_DRAM()) {
printk(KERN_WARNING "iommu: force-enabled, dma window"
- " (%ldMB) smaller than total memory (%ldMB)\n",
+ " (%ldMB) smaller than total memory (%lldMB)\n",
size >> 20, lmb_end_of_DRAM() >> 20);
return -ENODEV;
}
addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
archdata->dma_data = (void *)addr;
- dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
+ dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
}
static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
/* Todo: do some nicer parsing of bits and based on them go down
* to other sub-units FIRs and not only IIC
*/
- printk(KERN_ERR "Global Checkstop FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global Checkstop FIR : 0x%016llx\n",
in_be64(&pregs->checkstop_fir));
- printk(KERN_ERR "Global Recoverable FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global Recoverable FIR : 0x%016llx\n",
in_be64(&pregs->checkstop_fir));
- printk(KERN_ERR "Global MachineCheck FIR : 0x%016lx\n",
+ printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n",
in_be64(&pregs->spec_att_mchk_fir));
if (iregs == NULL)
return;
- printk(KERN_ERR "IOC FIR : 0x%016lx\n",
+ printk(KERN_ERR "IOC FIR : 0x%016llx\n",
in_be64(&iregs->ioc_fir));
}
{
struct spu_priv2 __iomem *priv2 = spu->priv2;
- pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+ pr_debug("%s: adding SLB[%d] 0x%016llx 0x%016llx\n",
__func__, slbe, slb->vsid, slb->esid);
out_be64(&priv2->slb_index_W, slbe);
{
int ret;
- pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
+ pr_debug("%s, %llx, %lx\n", __func__, dsisr, ea);
/*
* Handle kernel space hash faults immediately. User hash
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
- pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
+ pr_debug("%s: invalid syscall #%lld", __func__, s->nr_ret);
return -ENOSYS;
}
return spufs_coredump_read[num].read(ctx, buffer, size, off);
data = spufs_coredump_read[num].get(ctx);
- ret = snprintf(buffer, size, "0x%.16lx", data);
+ ret = snprintf(buffer, size, "0x%.16llx", data);
if (ret >= size)
return size;
return ++ret; /* count trailing NULL */
spuctx_switch_state(ctx, SPU_UTIL_IOWAIT);
- pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea,
+ pr_debug("ctx %p: ea %016llx, dsisr %016llx state %d\n", ctx, ea,
dsisr, ctx->state);
ctx->stats.hash_flt++;
static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
{
- pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+ pr_debug("queueing DMA %x %llx %x %x %x\n", cmd->lsa,
cmd->ea, cmd->size, cmd->tag, cmd->cmd);
switch (cmd->cmd) {
}
if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
- pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+ pr_debug("invalid DMA alignment, ea %llx lsa %x\n",
cmd->ea, cmd->lsa);
return -EIO;
}
}
seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
- " %c %lx %lx %lx %lx %x %x\n",
+ " %c %llx %llx %llx %llx %x %x\n",
ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
ctx->flags,
ctx->sched_flags,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
{
rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce);
if (rc)
- panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+ panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
rc);
index++;
uaddr += TCE_PAGE_SIZE;
while (npages--) {
rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0);
if (rc)
- panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+ panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
rc);
index++;
}
#include <asm/pmac_low_i2c.h>
#include <asm/pmac_pfunc.h>
-#define DEBUG
+#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
goto fail_rights;
}
- pr_debug("%s:%d: pu_id %lu, rights %lu(%lxh)\n",
+ pr_debug("%s:%d: pu_id %llu, rights %llu(%llxh)\n",
__func__, __LINE__, dev->lpm.pu_id, dev->lpm.rights,
dev->lpm.rights);
return -ENODEV;
}
- pr_debug("%s:%u: (%u:%u:%u): port %lu blk_size %lu num_blocks %lu "
+ pr_debug("%s:%u: (%u:%u:%u): port %llu blk_size %llu num_blocks %llu "
"num_regions %u\n", __func__, __LINE__, repo->bus_index,
repo->dev_index, repo->dev_type, port, blk_size, num_blocks,
num_regions);
result = -ENODEV;
goto fail_read_region;
}
- pr_debug("%s:%u: region %u: id %u start %lu size %lu\n",
+ pr_debug("%s:%u: region %u: id %u start %llu size %llu\n",
__func__, __LINE__, i, id, start, size);
p->regions[i].id = id;
if (rem)
break;
}
- pr_warning("%s:%u: device %lu:%lu not found\n", __func__, __LINE__,
+ pr_warning("%s:%u: device %llu:%llu not found\n", __func__, __LINE__,
bus_id, dev_id);
return;
found:
if (retries)
- pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
+ pr_debug("%s:%u: device %llu:%llu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
ps3_setup_dynamic_device(&repo);
res = lv1_storage_get_async_status(PS3_NOTIFICATION_DEV_ID, &tag,
&status);
if (tag != dev->tag)
- pr_err("%s:%u: tag mismatch, got %lx, expected %lx\n",
+ pr_err("%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
- pr_err("%s:%u: res %d status 0x%lx\n", __func__, __LINE__, res,
+ pr_err("%s:%u: res %d status 0x%llx\n", __func__, __LINE__, res,
status);
} else {
- pr_debug("%s:%u: completed, status 0x%lx\n", __func__,
+ pr_debug("%s:%u: completed, status 0x%llx\n", __func__,
__LINE__, status);
dev->lv1_status = status;
complete(&dev->done);
}
if (dev->lv1_status) {
- pr_err("%s:%u: %s not completed, status 0x%lx\n", __func__,
+ pr_err("%s:%u: %s not completed, status 0x%llx\n", __func__,
__LINE__, op, dev->lv1_status);
return -EIO;
}
if (res)
break;
- pr_debug("%s:%u: notify event type 0x%lx bus id %lu dev id %lu"
- " type %lu port %lu\n", __func__, __LINE__,
+ pr_debug("%s:%u: notify event type 0x%llx bus id %llu dev id %llu"
+ " type %llu port %llu\n", __func__, __LINE__,
notify_event->event_type, notify_event->bus_id,
notify_event->dev_id, notify_event->dev_type,
notify_event->dev_port);
if (notify_event->event_type != notify_region_probe ||
notify_event->bus_id != dev.sbd.bus_id) {
- pr_warning("%s:%u: bad notify_event: event %lu, "
- "dev_id %lu, dev_type %lu\n",
+ pr_warning("%s:%u: bad notify_event: event %llu, "
+ "dev_id %llu, dev_type %llu\n",
__func__, __LINE__, notify_event->event_type,
notify_event->dev_id,
notify_event->dev_type);
if (result) {
/* all entries bolted !*/
- pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+ pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%llx r=%llx\n",
__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
BUG();
}
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
* that there is no constraint on how many in this set an individual thread
* can acquire.
+ *
+ * The mask is declared as unsigned long so we can use set/clear_bit on it.
*/
#define PS3_BMP_MINALIGN 64
struct {
u64 status;
u64 unused_1[3];
- u64 mask;
+ unsigned long mask;
u64 unused_2[3];
};
u64 ipi_debug_brk_mask;
struct ps3_private *pd = get_irq_chip_data(virq);
unsigned long flags;
- pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+ pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, virq);
local_irq_save(flags);
struct ps3_private *pd = get_irq_chip_data(virq);
unsigned long flags;
- pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+ pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, virq);
local_irq_save(flags);
{
const struct ps3_private *pd = get_irq_chip_data(virq);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
set_irq_chip_data(virq, NULL);
int result;
const struct ps3_private *pd = get_irq_chip_data(virq);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(virq);
int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
result = lv1_construct_event_receive_port(&outlet);
unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
u64 lpar_addr;
BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
unsigned int class, unsigned int *virq)
{
int result;
- unsigned long outlet;
+ u64 outlet;
BUG_ON(class > 2);
pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
- pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+ pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
cpu, virq, pd->bmp.ipi_debug_brk_mask);
}
plug &= 0x3f;
if (unlikely(plug == NO_IRQ)) {
- pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
+ pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
pd->thread_id = get_hard_smp_processor_id(cpu);
spin_lock_init(&pd->bmp.lock);
- pr_debug("%s:%d: ppe_id %lu, thread_id %lu, bmp %lxh\n",
+ pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
lv1_get_logical_ppe_id(&ppe_id);
result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
- DBG("%s:%d: lv1_configure_irq_state_bitmap (%lu:%lu/%d) %s\n", __func__,
+ DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__,
__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
}
*/
struct mem_region {
- unsigned long base;
- unsigned long size;
+ u64 base;
+ u64 size;
unsigned long offset;
};
*/
struct map {
- unsigned long total;
- unsigned long vas_id;
- unsigned long htab_size;
+ u64 total;
+ u64 vas_id;
+ u64 htab_size;
struct mem_region rm;
struct mem_region r1;
};
static void __maybe_unused _debug_dump_map(const struct map *m,
const char *func, int line)
{
- DBG("%s:%d: map.total = %lxh\n", func, line, m->total);
- DBG("%s:%d: map.rm.size = %lxh\n", func, line, m->rm.size);
- DBG("%s:%d: map.vas_id = %lu\n", func, line, m->vas_id);
- DBG("%s:%d: map.htab_size = %lxh\n", func, line, m->htab_size);
- DBG("%s:%d: map.r1.base = %lxh\n", func, line, m->r1.base);
+ DBG("%s:%d: map.total = %llxh\n", func, line, m->total);
+ DBG("%s:%d: map.rm.size = %llxh\n", func, line, m->rm.size);
+ DBG("%s:%d: map.vas_id = %llu\n", func, line, m->vas_id);
+ DBG("%s:%d: map.htab_size = %llxh\n", func, line, m->htab_size);
+ DBG("%s:%d: map.r1.base = %llxh\n", func, line, m->r1.base);
DBG("%s:%d: map.r1.offset = %lxh\n", func, line, m->r1.offset);
- DBG("%s:%d: map.r1.size = %lxh\n", func, line, m->r1.size);
+ DBG("%s:%d: map.r1.size = %llxh\n", func, line, m->r1.size);
}
static struct map map;
void __init ps3_mm_vas_create(unsigned long* htab_size)
{
int result;
- unsigned long start_address;
- unsigned long size;
- unsigned long access_right;
- unsigned long max_page_size;
- unsigned long flags;
+ u64 start_address;
+ u64 size;
+ u64 access_right;
+ u64 max_page_size;
+ u64 flags;
result = lv1_query_logical_partition_address_region_info(0,
&start_address, &size, &access_right, &max_page_size,
}
if (max_page_size < PAGE_SHIFT_16M) {
- DBG("%s:%d: bad max_page_size %lxh\n", __func__, __LINE__,
+ DBG("%s:%d: bad max_page_size %llxh\n", __func__, __LINE__,
max_page_size);
goto fail;
}
{
int result;
- DBG("%s:%d: map.vas_id = %lu\n", __func__, __LINE__, map.vas_id);
+ DBG("%s:%d: map.vas_id = %llu\n", __func__, __LINE__, map.vas_id);
if (map.vas_id) {
result = lv1_select_virtual_address_space(0);
static int ps3_mm_region_create(struct mem_region *r, unsigned long size)
{
int result;
- unsigned long muid;
+ u64 muid;
r->size = _ALIGN_DOWN(size, 1 << PAGE_SHIFT_16M);
DBG("%s:%d requested %lxh\n", __func__, __LINE__, size);
- DBG("%s:%d actual %lxh\n", __func__, __LINE__, r->size);
- DBG("%s:%d difference %lxh (%luMB)\n", __func__, __LINE__,
- (unsigned long)(size - r->size),
- (size - r->size) / 1024 / 1024);
+ DBG("%s:%d actual %llxh\n", __func__, __LINE__, r->size);
+ DBG("%s:%d difference %llxh (%lluMB)\n", __func__, __LINE__,
+ size - r->size, (size - r->size) / 1024 / 1024);
if (r->size == 0) {
DBG("%s:%d: size == 0\n", __func__, __LINE__);
{
int result;
- DBG("%s:%d: r->base = %lxh\n", __func__, __LINE__, r->base);
+ DBG("%s:%d: r->base = %llxh\n", __func__, __LINE__, r->base);
if (r->base) {
result = lv1_release_memory(r->base);
BUG_ON(result);
static void __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
const char *func, int line)
{
- DBG("%s:%d: dev %lu:%lu\n", func, line, r->dev->bus_id,
+ DBG("%s:%d: dev %llu:%llu\n", func, line, r->dev->bus_id,
r->dev->dev_id);
DBG("%s:%d: page_size %u\n", func, line, r->page_size);
DBG("%s:%d: bus_addr %lxh\n", func, line, r->bus_addr);
static void _dma_dump_chunk (const struct dma_chunk* c, const char* func,
int line)
{
- DBG("%s:%d: r.dev %lu:%lu\n", func, line,
+ DBG("%s:%d: r.dev %llu:%llu\n", func, line,
c->region->dev->bus_id, c->region->dev->dev_id);
DBG("%s:%d: r.bus_addr %lxh\n", func, line, c->region->bus_addr);
DBG("%s:%d: r.page_size %u\n", func, line, c->region->page_size);
/* build ioptes for the area */
pages = len >> r->page_size;
- DBG("%s: pgsize=%#x len=%#lx pages=%#x iopteflag=%#lx\n", __func__,
+ DBG("%s: pgsize=%#x len=%#lx pages=%#x iopteflag=%#llx\n", __func__,
r->page_size, r->len, pages, iopte_flag);
for (iopage = 0; iopage < pages; iopage++) {
offset = (1 << r->page_size) * iopage;
static int dma_sb_region_create(struct ps3_dma_region *r)
{
int result;
+ u64 bus_addr;
DBG(" -> %s:%d:\n", __func__, __LINE__);
BUG_ON(!r);
if (!r->dev->bus_id) {
- pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
+ pr_info("%s:%d: %llu:%llu no dma\n", __func__, __LINE__,
r->dev->bus_id, r->dev->dev_id);
return 0;
}
result = lv1_allocate_device_dma_region(r->dev->bus_id, r->dev->dev_id,
roundup_pow_of_two(r->len), r->page_size, r->region_type,
- &r->bus_addr);
+ &bus_addr);
+ r->bus_addr = bus_addr;
if (result) {
DBG("%s:%d: lv1_allocate_device_dma_region failed: %s\n",
static int dma_ioc0_region_create(struct ps3_dma_region *r)
{
int result;
+ u64 bus_addr;
INIT_LIST_HEAD(&r->chunk_list.head);
spin_lock_init(&r->chunk_list.lock);
result = lv1_allocate_io_segment(0,
r->len,
r->page_size,
- &r->bus_addr);
+ &bus_addr);
+ r->bus_addr = bus_addr;
if (result) {
DBG("%s:%d: lv1_allocate_io_segment failed: %s\n",
__func__, __LINE__, ps3_result(result));
BUG_ON(!r);
if (!r->dev->bus_id) {
- pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
+ pr_info("%s:%d: %llu:%llu no dma\n", __func__, __LINE__,
r->dev->bus_id, r->dev->dev_id);
return 0;
}
*/
static int dma_sb_map_area(struct ps3_dma_region *r, unsigned long virt_addr,
- unsigned long len, unsigned long *bus_addr,
+ unsigned long len, dma_addr_t *bus_addr,
u64 iopte_flag)
{
int result;
DBG("%s:%d lpar_addr %lxh\n", __func__, __LINE__,
lpar_addr);
DBG("%s:%d len %lxh\n", __func__, __LINE__, len);
- DBG("%s:%d bus_addr %lxh (%lxh)\n", __func__, __LINE__,
+ DBG("%s:%d bus_addr %llxh (%lxh)\n", __func__, __LINE__,
*bus_addr, len);
}
}
static int dma_ioc0_map_area(struct ps3_dma_region *r, unsigned long virt_addr,
- unsigned long len, unsigned long *bus_addr,
+ unsigned long len, dma_addr_t *bus_addr,
u64 iopte_flag)
{
int result;
return result;
}
*bus_addr = c->bus_addr + phys_addr - aligned_phys;
- DBG("%s: va=%#lx pa=%#lx a_pa=%#lx bus=%#lx\n", __func__,
+ DBG("%s: va=%#lx pa=%#lx a_pa=%#lx bus=%#llx\n", __func__,
virt_addr, phys_addr, aligned_phys, *bus_addr);
c->usage_count = 1;
* This is the common dma unmap routine.
*/
-static int dma_sb_unmap_area(struct ps3_dma_region *r, unsigned long bus_addr,
+static int dma_sb_unmap_area(struct ps3_dma_region *r, dma_addr_t bus_addr,
unsigned long len)
{
unsigned long flags;
1 << r->page_size);
unsigned long aligned_len = _ALIGN_UP(len + bus_addr
- aligned_bus, 1 << r->page_size);
- DBG("%s:%d: not found: bus_addr %lxh\n",
+ DBG("%s:%d: not found: bus_addr %llxh\n",
__func__, __LINE__, bus_addr);
DBG("%s:%d: not found: len %lxh\n",
__func__, __LINE__, len);
}
static int dma_ioc0_unmap_area(struct ps3_dma_region *r,
- unsigned long bus_addr, unsigned long len)
+ dma_addr_t bus_addr, unsigned long len)
{
unsigned long flags;
struct dma_chunk *c;
- DBG("%s: start a=%#lx l=%#lx\n", __func__, bus_addr, len);
+ DBG("%s: start a=%#llx l=%#lx\n", __func__, bus_addr, len);
spin_lock_irqsave(&r->chunk_list.lock, flags);
c = dma_find_chunk(r, bus_addr, len);
unsigned long aligned_len = _ALIGN_UP(len + bus_addr
- aligned_bus,
1 << r->page_size);
- DBG("%s:%d: not found: bus_addr %lxh\n",
+ DBG("%s:%d: not found: bus_addr %llxh\n",
__func__, __LINE__, bus_addr);
DBG("%s:%d: not found: len %lxh\n",
__func__, __LINE__, len);
static int dma_sb_region_create_linear(struct ps3_dma_region *r)
{
int result;
- unsigned long virt_addr, len, tmp;
+ unsigned long virt_addr, len;
+ dma_addr_t tmp;
if (r->len > 16*1024*1024) { /* FIXME: need proper fix */
/* force 16M dma pages for linear mapping */
static int dma_sb_region_free_linear(struct ps3_dma_region *r)
{
int result;
- unsigned long bus_addr, len, lpar_addr;
+ dma_addr_t bus_addr;
+ unsigned long len, lpar_addr;
if (r->offset < map.rm.size) {
/* Unmap (part of) 1st RAM chunk */
*/
static int dma_sb_map_area_linear(struct ps3_dma_region *r,
- unsigned long virt_addr, unsigned long len, unsigned long *bus_addr,
+ unsigned long virt_addr, unsigned long len, dma_addr_t *bus_addr,
u64 iopte_flag)
{
unsigned long phys_addr = is_kernel_addr(virt_addr) ? __pa(virt_addr)
*/
static int dma_sb_unmap_area_linear(struct ps3_dma_region *r,
- unsigned long bus_addr, unsigned long len)
+ dma_addr_t bus_addr, unsigned long len)
{
return 0;
};
EXPORT_SYMBOL(ps3_dma_region_free);
int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
- unsigned long len, unsigned long *bus_addr,
+ unsigned long len, dma_addr_t *bus_addr,
u64 iopte_flag)
{
return r->region_ops->map(r, virt_addr, len, bus_addr, iopte_flag);
}
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr,
unsigned long len)
{
return r->region_ops->unmap(r, bus_addr, len);
{
pr_debug("%s:%d: p.boot_flag: %u\n", func, line, p->boot_flag);
pr_debug("%s:%d: p.num_params: %u\n", func, line, p->num_params);
- pr_debug("%s:%d: p.rtc_diff %ld\n", func, line, p->rtc_diff);
+ pr_debug("%s:%d: p.rtc_diff %lld\n", func, line, p->rtc_diff);
pr_debug("%s:%d: p.av_multi_out %u\n", func, line, p->av_multi_out);
pr_debug("%s:%d: p.ctrl_button: %u\n", func, line, p->ctrl_button);
pr_debug("%s:%d: p.static_ip_addr: %u.%u.%u.%u\n", func, line,
s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
s[i] = 0;
- pr_debug("%s:%d: %s%016lx : %s\n", func, line, hdr, n, s);
+ pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
#endif
}
_dump_field("n2: ", n2, func, line);
_dump_field("n3: ", n3, func, line);
_dump_field("n4: ", n4, func, line);
- pr_debug("%s:%d: v1: %016lx\n", func, line, v1);
- pr_debug("%s:%d: v2: %016lx\n", func, line, v2);
+ pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
+ pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
}
/**
*_v2 = v2;
if (v1 && !_v1)
- pr_debug("%s:%d: warning: discarding non-zero v1: %016lx\n",
+ pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
__func__, __LINE__, v1);
if (v2 && !_v2)
- pr_debug("%s:%d: warning: discarding non-zero v2: %016lx\n",
+ pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
__func__, __LINE__, v2);
return 0;
return result;
}
- pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %lu, num_dev %u\n",
+ pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
num_dev);
return result;
}
- pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %lu\n",
+ pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
*repo = tmp;
struct ps3_repository_device tmp;
unsigned int num_dev;
- pr_debug(" -> %s:%u: find device by id %lu:%lu\n", __func__, __LINE__,
+ pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
bus_id, dev_id);
for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
if (tmp.bus_id == bus_id)
goto found_bus;
- pr_debug("%s:%u: skip, bus_id %lu\n", __func__, __LINE__,
+ pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
tmp.bus_id);
}
pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
if (tmp.dev_id == dev_id)
goto found_dev;
- pr_debug("%s:%u: skip, dev_id %lu\n", __func__, __LINE__,
+ pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
tmp.dev_id);
}
pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
return result;
}
- pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%lu:%lu)\n",
+ pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
__func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
tmp.dev_index, tmp.bus_id, tmp.dev_id);
*repo = tmp;
#define prealloc_ps3flash_bounce_buffer() do { } while (0)
#endif
-static int ps3_set_dabr(u64 dabr)
+static int ps3_set_dabr(unsigned long dabr)
{
enum {DABR_USER = 1, DABR_KERNEL = 2,};
static unsigned long get_vas_id(void)
{
- unsigned long id;
+ u64 id;
lv1_get_logical_ppe_id(&id);
lv1_get_virtual_address_space_id_of_ppe(id, &id);
static int __init construct_spu(struct spu *spu)
{
int result;
- unsigned long unused;
+ u64 unused;
+ u64 problem_phys;
+ u64 local_store_phys;
result = lv1_construct_logical_spe(PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT,
PAGE_SHIFT, PAGE_SHIFT, get_vas_id(), SPE_TYPE_LOGICAL,
- &spu_pdata(spu)->priv2_addr, &spu->problem_phys,
- &spu->local_store_phys, &unused,
+ &spu_pdata(spu)->priv2_addr, &problem_phys,
+ &local_store_phys, &unused,
&spu_pdata(spu)->shadow_addr,
&spu_pdata(spu)->spe_id);
+ spu->problem_phys = problem_phys;
+ spu->local_store_phys = local_store_phys;
if (result) {
pr_debug("%s:%d: lv1_construct_logical_spe failed: %s\n",
case PS3_MATCH_ID_SYSTEM_MANAGER:
pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
__LINE__, dev->match_id);
- pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+ pr_debug("%s:%d: bus_id: %llu\n", __func__, __LINE__,
dev->bus_id);
BUG();
return -EINVAL;
case PS3_MATCH_ID_SYSTEM_MANAGER:
pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
__LINE__, dev->match_id);
- pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+ pr_debug("%s:%d: bus_id: %llu\n", __func__, __LINE__,
dev->bus_id);
BUG();
return -EINVAL;
static void _dump_mmio_region(const struct ps3_mmio_region* r,
const char* func, int line)
{
- pr_debug("%s:%d: dev %lu:%lu\n", func, line, r->dev->bus_id,
+ pr_debug("%s:%d: dev %llu:%llu\n", func, line, r->dev->bus_id,
r->dev->dev_id);
pr_debug("%s:%d: bus_addr %lxh\n", func, line, r->bus_addr);
pr_debug("%s:%d: len %lxh\n", func, line, r->len);
static int ps3_sb_mmio_region_create(struct ps3_mmio_region *r)
{
int result;
+ u64 lpar_addr;
result = lv1_map_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
- r->bus_addr, r->len, r->page_size, &r->lpar_addr);
+ r->bus_addr, r->len, r->page_size, &lpar_addr);
+ r->lpar_addr = lpar_addr;
if (result) {
pr_debug("%s:%d: lv1_map_device_mmio_region failed: %s\n",
{
struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
int result;
- unsigned long bus_addr;
+ dma_addr_t bus_addr;
void *ptr = page_address(page) + offset;
result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
{
struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
int result;
- unsigned long bus_addr;
+ dma_addr_t bus_addr;
u64 iopte_flag;
void *ptr = page_address(page) + offset;
}
if (rc && printk_ratelimit()) {
- printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
- printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
- printk("\ttcenum = 0x%lx\n", (u64)tcenum);
- printk("\ttce val = 0x%lx\n", tce );
+ printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+ printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%llx\n", (u64)tcenum);
+ printk("\ttce val = 0x%llx\n", tce );
show_stack(current, (unsigned long *)__get_SP());
}
}
if (rc && printk_ratelimit()) {
- printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
- printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
- printk("\tnpages = 0x%lx\n", (u64)npages);
- printk("\ttce[0] val = 0x%lx\n", tcep[0]);
+ printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+ printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\tnpages = 0x%llx\n", (u64)npages);
+ printk("\ttce[0] val = 0x%llx\n", tcep[0]);
show_stack(current, (unsigned long *)__get_SP());
}
return ret;
rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
if (rc && printk_ratelimit()) {
- printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
- printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
- printk("\ttcenum = 0x%lx\n", (u64)tcenum);
+ printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+ printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%llx\n", (u64)tcenum);
show_stack(current, (unsigned long *)__get_SP());
}
if (rc && printk_ratelimit()) {
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
- printk("\trc = %ld\n", rc);
- printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
- printk("\tnpages = 0x%lx\n", (u64)npages);
+ printk("\trc = %lld\n", rc);
+ printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\tnpages = 0x%llx\n", (u64)npages);
show_stack(current, (unsigned long *)__get_SP());
}
}
rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
if (rc && printk_ratelimit()) {
- printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n",
- rc);
- printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
- printk("\ttcenum = 0x%lx\n", (u64)tcenum);
+ printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
+ printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
+ printk("\ttcenum = 0x%llx\n", (u64)tcenum);
show_stack(current, (unsigned long *)__get_SP());
}
#include <sysdev/fsl_pci.h>
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+ unsigned int index, const struct resource *res,
+ resource_size_t offset)
+{
+ resource_size_t pci_addr = res->start - offset;
+ resource_size_t phys_addr = res->start;
+ resource_size_t size = res->end - res->start + 1;
+ u32 flags = 0x80044000; /* enable & mem R/W */
+ unsigned int i;
+
+ pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
+ (u64)res->start, (u64)size);
+
+ if (res->flags & IORESOURCE_PREFETCH)
+ flags |= 0x10000000; /* enable relaxed ordering */
+
+ for (i = 0; size > 0; i++) {
+ unsigned int bits = min(__ilog2(size),
+ __ffs(pci_addr | phys_addr));
+
+ if (index + i >= 5)
+ return -1;
+
+ out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
+ out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
+ out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
+ out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
+
+ pci_addr += (resource_size_t)1U << bits;
+ phys_addr += (resource_size_t)1U << bits;
+ size -= (resource_size_t)1U << bits;
+ }
+
+ return i;
+}
+
/* atmu setup for fsl pci/pcie controller */
static void __init setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
- int i;
+ int i, j, n;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+ if (!pci) {
+ dev_err(hose->parent, "Unable to map ATMU registers\n");
+ return;
+ }
- /* Disable all windows (except powar0 since its ignored) */
+ /* Disable all windows (except powar0 since it's ignored) */
for(i = 1; i < 5; i++)
out_be32(&pci->pow[i].powar, 0);
for(i = 0; i < 3; i++)
out_be32(&pci->piw[i].piwar, 0);
/* Setup outbound MEM window */
- for(i = 0; i < 3; i++)
- if (hose->mem_resources[i].flags & IORESOURCE_MEM){
- resource_size_t pci_addr_start =
- hose->mem_resources[i].start -
- hose->pci_mem_offset;
- pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
- (u64)hose->mem_resources[i].start,
- (u64)hose->mem_resources[i].end
- - (u64)hose->mem_resources[i].start + 1);
- out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
- out_be32(&pci->pow[i+1].potear, 0);
- out_be32(&pci->pow[i+1].powbar,
- (hose->mem_resources[i].start >> 12));
- /* Enable, Mem R/W */
- out_be32(&pci->pow[i+1].powar, 0x80044000
- | (__ilog2(hose->mem_resources[i].end
- - hose->mem_resources[i].start + 1) - 1));
- }
+ for(i = 0, j = 1; i < 3; i++) {
+ if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
+ continue;
+
+ n = setup_one_atmu(pci, j, &hose->mem_resources[i],
+ hose->pci_mem_offset);
+
+ if (n < 0 || j >= 5) {
+ pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
+ hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
+ } else
+ j += n;
+ }
/* Setup outbound IO window */
- if (hose->io_resource.flags & IORESOURCE_IO){
- pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
- "phy base 0x%016llx.\n",
- (u64)hose->io_resource.start,
- (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
- (u64)hose->io_base_phys);
- out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
- out_be32(&pci->pow[i+1].potear, 0);
- out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
- /* Enable, IO R/W */
- out_be32(&pci->pow[i+1].powar, 0x80088000
- | (__ilog2(hose->io_resource.end
- - hose->io_resource.start + 1) - 1));
+ if (hose->io_resource.flags & IORESOURCE_IO) {
+ if (j >= 5) {
+ pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
+ } else {
+ pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
+ "phy base 0x%016llx.\n",
+ (u64)hose->io_resource.start,
+ (u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
+ (u64)hose->io_base_phys);
+ out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
+ out_be32(&pci->pow[j].potear, 0);
+ out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
+ /* Enable, IO R/W */
+ out_be32(&pci->pow[j].powar, 0x80088000
+ | (__ilog2(hose->io_resource.end
+ - hose->io_resource.start + 1) - 1));
+ }
}
/* Setup 2G inbound Memory Window @ 1 */
out_be32(&pci->piw[2].pitar, 0x00000000);
out_be32(&pci->piw[2].piwbar,0x00000000);
out_be32(&pci->piw[2].piwar, PIWAR_2G);
+
+ iounmap(pci);
}
static void __init setup_pci_cmd(struct pci_controller *hose)
addr = addr | ((u64)readl(base + HT_MSI_ADDR_HI) << 32);
}
- printk(KERN_DEBUG "mpic: - HT:%02x.%x %s MSI mapping found @ 0x%lx\n",
+ printk(KERN_DEBUG "mpic: - HT:%02x.%x %s MSI mapping found @ 0x%llx\n",
PCI_SLOT(devfn), PCI_FUNC(devfn),
flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled", addr);
config S390
def_bool y
select USE_GENERIC_SMP_HELPERS if SMP
+ select HAVE_SYSCALL_WRAPPERS
select HAVE_FUNCTION_TRACER
select HAVE_OPROFILE
select HAVE_KPROBES
unifdef-y += debug.h
unifdef-y += chpid.h
unifdef-y += schid.h
-unifdef-y += swab.h
#ifndef _S390_BYTEORDER_H
#define _S390_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _S390_BYTEORDER_H */
.globl sys32_newuname_wrapper
sys32_newuname_wrapper:
llgtr %r2,%r2 # struct new_utsname *
- jg s390x_newuname # branch to system call
+ jg sys_s390_newuname # branch to system call
.globl compat_sys_adjtimex_wrapper
compat_sys_adjtimex_wrapper:
.globl sys32_personality_wrapper
sys32_personality_wrapper:
llgfr %r2,%r2 # unsigned long
- jg s390x_personality # branch to system call
+ jg sys_s390_personality # branch to system call
.globl sys32_setfsuid16_wrapper
sys32_setfsuid16_wrapper:
struct old_sigaction;
struct sel_arg_struct;
-long sys_pipe(unsigned long __user *fildes);
long sys_mmap2(struct mmap_arg_struct __user *arg);
-long old_mmap(struct mmap_arg_struct __user *arg);
+long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
long sys_ipc(uint call, int first, unsigned long second,
unsigned long third, void __user *ptr);
-long s390x_newuname(struct new_utsname __user *name);
-long s390x_personality(unsigned long personality);
-long s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
+long sys_s390_newuname(struct new_utsname __user *name);
+long sys_s390_personality(unsigned long personality);
+long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
size_t len, int advice);
-long s390_fadvise64_64(struct fadvise64_64_args __user *args);
-long s390_fallocate(int fd, int mode, loff_t offset, u32 len_high, u32 len_low);
+long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
+long sys_s390_fallocate(int fd, int mode, loff_t offset, u32 len_high,
+ u32 len_low);
long sys_fork(void);
long sys_clone(void);
long sys_vfork(void);
void execve_tail(void);
long sys_execve(void);
-int sys_sigsuspend(int history0, int history1, old_sigset_t mask);
+long sys_sigsuspend(int history0, int history1, old_sigset_t mask);
long sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact);
long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss);
#include <linux/tick.h>
#include <linux/elfcore.h>
#include <linux/kernel_stat.h>
+#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
return 0;
}
-asmlinkage long sys_fork(void)
+SYSCALL_DEFINE0(fork)
{
struct pt_regs *regs = task_pt_regs(current);
return do_fork(SIGCHLD, regs->gprs[15], regs, 0, NULL, NULL);
}
-asmlinkage long sys_clone(void)
+SYSCALL_DEFINE0(clone)
{
struct pt_regs *regs = task_pt_regs(current);
unsigned long clone_flags;
* do not have enough call-clobbered registers to hold all
* the information you need.
*/
-asmlinkage long sys_vfork(void)
+SYSCALL_DEFINE0(vfork)
{
struct pt_regs *regs = task_pt_regs(current);
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
/*
* sys_execve() executes a new program.
*/
-asmlinkage long sys_execve(void)
+SYSCALL_DEFINE0(execve)
{
struct pt_regs *regs = task_pt_regs(current);
char *filename;
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/tracehook.h>
+#include <linux/syscalls.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
return -ERESTARTNOHAND;
}
-asmlinkage long
-sys_sigaction(int sig, const struct old_sigaction __user *act,
- struct old_sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct old_sigaction __user *, act,
+ struct old_sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
return ret;
}
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+SYSCALL_DEFINE2(sigaltstack, const stack_t __user *, uss,
+ stack_t __user *, uoss)
{
struct pt_regs *regs = task_pt_regs(current);
return do_sigaltstack(uss, uoss, regs->gprs[15]);
}
-
-
/* Returns non-zero on fault. */
static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
{
return 0;
}
-asmlinkage long sys_sigreturn(void)
+SYSCALL_DEFINE0(sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
sigframe __user *frame = (sigframe __user *)regs->gprs[15];
return 0;
}
-asmlinkage long sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
{
struct pt_regs *regs = task_pt_regs(current);
rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15];
#include <linux/personality.h>
#include <linux/unistd.h>
#include <linux/ipc.h>
+#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include "entry.h"
unsigned long offset;
};
-asmlinkage long sys_mmap2(struct mmap_arg_struct __user *arg)
+SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
{
struct mmap_arg_struct a;
int error = -EFAULT;
return error;
}
-asmlinkage long old_mmap(struct mmap_arg_struct __user *arg)
+SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
{
struct mmap_arg_struct a;
long error = -EFAULT;
*
* This is really horribly ugly.
*/
-asmlinkage long sys_ipc(uint call, int first, unsigned long second,
- unsigned long third, void __user *ptr)
+SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+ unsigned long, third, void __user *, ptr)
{
struct ipc_kludge tmp;
int ret;
}
#ifdef CONFIG_64BIT
-asmlinkage long s390x_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
{
int ret = sys_newuname(name);
return ret;
}
-asmlinkage long s390x_personality(unsigned long personality)
+SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
{
int ret;
*/
#ifndef CONFIG_64BIT
-asmlinkage long
-s390_fadvise64(int fd, u32 offset_high, u32 offset_low, size_t len, int advice)
+SYSCALL_DEFINE5(s390_fadvise64, int, fd, u32, offset_high, u32, offset_low,
+ size_t, len, int, advice)
{
return sys_fadvise64(fd, (u64) offset_high << 32 | offset_low,
len, advice);
}
-#endif
-
struct fadvise64_64_args {
int fd;
long long offset;
int advice;
};
-asmlinkage long
-s390_fadvise64_64(struct fadvise64_64_args __user *args)
+SYSCALL_DEFINE1(s390_fadvise64_64, struct fadvise64_64_args __user *, args)
{
struct fadvise64_64_args a;
return sys_fadvise64_64(a.fd, a.offset, a.len, a.advice);
}
-#ifndef CONFIG_64BIT
/*
* This is a wrapper to call sys_fallocate(). For 31 bit s390 the last
* 64 bit argument "len" is split into the upper and lower 32 bits. The
* to
* %r2: fd, %r3: mode, %r4/%r5: offset, 96(%r15)-103(%r15): len
*/
-asmlinkage long s390_fallocate(int fd, int mode, loff_t offset,
+SYSCALL_DEFINE(s390_fallocate)(int fd, int mode, loff_t offset,
u32 len_high, u32 len_low)
{
return sys_fallocate(fd, mode, offset, ((u64)len_high << 32) | len_low);
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_s390_fallocate(long fd, long mode, loff_t offset,
+ long len_high, long len_low)
+{
+ return SYSC_s390_fallocate((int) fd, (int) mode, offset,
+ (u32) len_high, (u32) len_low);
+}
+SYSCALL_ALIAS(sys_s390_fallocate, SyS_s390_fallocate);
+#endif
+
#endif
SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper) /* old readdir syscall */
-SYSCALL(old_mmap,old_mmap,old32_mmap_wrapper) /* 90 */
+SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper) /* 90 */
SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
SYSCALL(sys_clone,sys_clone,sys32_clone) /* 120 */
SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
NI_SYSCALL /* modify_ldt for i386 */
SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper) /* 125 */
SYSCALL(sys_fchdir,sys_fchdir,sys32_fchdir_wrapper)
SYSCALL(sys_bdflush,sys_bdflush,sys32_bdflush_wrapper)
SYSCALL(sys_sysfs,sys_sysfs,sys32_sysfs_wrapper) /* 135 */
-SYSCALL(sys_personality,s390x_personality,sys32_personality_wrapper)
+SYSCALL(sys_personality,sys_s390_personality,sys32_personality_wrapper)
NI_SYSCALL /* for afs_syscall */
SYSCALL(sys_setfsuid16,sys_ni_syscall,sys32_setfsuid16_wrapper) /* old setfsuid16 syscall */
SYSCALL(sys_setfsgid16,sys_ni_syscall,sys32_setfsgid16_wrapper) /* old setfsgid16 syscall */
SYSCALL(sys_epoll_ctl,sys_epoll_ctl,sys_epoll_ctl_wrapper) /* 250 */
SYSCALL(sys_epoll_wait,sys_epoll_wait,sys_epoll_wait_wrapper)
SYSCALL(sys_set_tid_address,sys_set_tid_address,sys32_set_tid_address_wrapper)
-SYSCALL(s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
+SYSCALL(sys_s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
SYSCALL(sys_timer_create,sys_timer_create,sys32_timer_create_wrapper)
SYSCALL(sys_timer_settime,sys_timer_settime,sys32_timer_settime_wrapper) /* 255 */
SYSCALL(sys_timer_gettime,sys_timer_gettime,sys32_timer_gettime_wrapper)
SYSCALL(sys_clock_getres,sys_clock_getres,sys32_clock_getres_wrapper)
SYSCALL(sys_clock_nanosleep,sys_clock_nanosleep,sys32_clock_nanosleep_wrapper)
NI_SYSCALL /* reserved for vserver */
-SYSCALL(s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
+SYSCALL(sys_s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
SYSCALL(sys_statfs64,sys_statfs64,compat_sys_statfs64_wrapper)
SYSCALL(sys_fstatfs64,sys_fstatfs64,compat_sys_fstatfs64_wrapper)
SYSCALL(sys_remap_file_pages,sys_remap_file_pages,sys32_remap_file_pages_wrapper)
SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper)
SYSCALL(sys_epoll_pwait,sys_epoll_pwait,compat_sys_epoll_pwait_wrapper)
SYSCALL(sys_utimes,sys_utimes,compat_sys_utimes_wrapper)
-SYSCALL(s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
+SYSCALL(sys_s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
SYSCALL(sys_utimensat,sys_utimensat,compat_sys_utimensat_wrapper) /* 315 */
SYSCALL(sys_signalfd,sys_signalfd,compat_sys_signalfd_wrapper)
NI_SYSCALL /* 317 old sys_timer_fd */
unifdef-y += unistd_64.h
unifdef-y += posix_types_32.h
unifdef-y += posix_types_64.h
-unifdef-y += swab.h
#ifndef __ASM_SH_BYTEORDER_H
#define __ASM_SH_BYTEORDER_H
-#include <asm/swab.h>
-
#ifdef __LITTLE_ENDIAN__
#include <linux/byteorder/little_endian.h>
#else
asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs __regs);
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs __regs);
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs __regs);
asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
size_t count, long dummy, loff_t pos);
asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
* sys_pipe() is the normal C calling standard for creating
* a pipe. It's not the way Unix traditionally does this, though.
*/
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs __regs)
{
.long sys_mkdir
.long sys_rmdir /* 40 */
.long sys_dup
- .long sys_pipe
+ .long sys_sh_pipe
.long sys_times
.long sys_ni_syscall /* old prof syscall holder */
.long sys_brk /* 45 */
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
header-y += uctx.h
header-y += utrap.h
header-y += watchdog.h
-header-y += swab.h
#ifndef _SPARC_BYTEORDER_H
#define _SPARC_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _SPARC_BYTEORDER_H */
ld [%sp + STACKFRAME_SZ + PT_I0], %o0
.align 4
- .globl sys_pipe
-sys_pipe:
+ .globl sys_sparc_pipe
+sys_sparc_pipe:
mov %o7, %l5
add %sp, STACKFRAME_SZ, %o0 ! pt_regs *regs arg
call sparc_pipe
#include <linux/pci.h>
#include <linux/init.h>
-#include <asm/spinlock.h>
#include <asm/system.h>
#include <asm/cpudata.h>
#include <asm/uaccess.h>
short revents;
};
-/* used by various drivers */
-#ifdef CONFIG_SMP
-/* Out of line rw-locking implementation. */
-EXPORT_SYMBOL(__read_lock);
-EXPORT_SYMBOL(__read_unlock);
-EXPORT_SYMBOL(__write_lock);
-EXPORT_SYMBOL(__write_unlock);
-EXPORT_SYMBOL(__write_trylock);
-#endif /* CONFIG_SMP */
-
/* from helpers.S */
EXPORT_SYMBOL(__flushw_user);
EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
add %sp, PTREGS_OFF, %o0
.align 32
-sys_pipe:
+sys_sparc_pipe:
ba,pt %xcc, sparc_pipe
add %sp, PTREGS_OFF, %o0
sys_nis_syscall:
/*25*/ .long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
/*30*/ .long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
/*35*/ .long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile
-/*40*/ .long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid
+/*40*/ .long sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_getuid
/*45*/ .long sys_umount, sys_setgid16, sys_getgid16, sys_signal, sys_geteuid16
/*50*/ .long sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, sys_ioctl
/*55*/ .long sys_reboot, sys_mmap2, sys_symlink, sys_readlink, sys_execve
/*185*/ .long sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
/*190*/ .long sys_init_module, sys_personality, sparc_remap_file_pages, sys_epoll_create, sys_epoll_ctl
/*195*/ .long sys_epoll_wait, sys_ioprio_set, sys_getppid, sparc_sigaction, sys_sgetmask
-/*200*/ .long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, old_readdir
+/*200*/ .long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, sys_old_readdir
/*205*/ .long sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
/*210*/ .long sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
/*215*/ .long sys_ipc, sys_sigreturn, sys_clone, sys_ioprio_get, sys_adjtimex
/*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
/*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
-/*40*/ .word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
+/*40*/ .word compat_sys_newlstat, sys_dup, sys_sparc_pipe, compat_sys_times, sys_getuid
.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
/*50*/ .word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
/*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
/*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
.word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64
-/*40*/ .word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall
+/*40*/ .word sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_nis_syscall
.word sys_umount, sys_setgid, sys_getgid, sys_signal, sys_geteuid
/*50*/ .word sys_getegid, sys_acct, sys_memory_ordering, sys_nis_syscall, sys_ioctl
.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
unifdef-y += unistd_64.h
unifdef-y += vm86.h
unifdef-y += vsyscall.h
-unifdef-y += swab.h
#ifndef _ASM_X86_BYTEORDER_H
#define _ASM_X86_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ASM_X86_BYTEORDER_H */
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
+static inline int is_new_memtype_allowed(unsigned long flags,
+ unsigned long new_flags)
+{
+ /*
+ * Certain new memtypes are not allowed with certain
+ * requested memtype:
+ * - request is uncached, return cannot be write-back
+ * - request is write-combine, return cannot be write-back
+ */
+ if ((flags == _PAGE_CACHE_UC_MINUS &&
+ new_flags == _PAGE_CACHE_WB) ||
+ (flags == _PAGE_CACHE_WC &&
+ new_flags == _PAGE_CACHE_WB)) {
+ return 0;
+ }
+
+ return 1;
+}
+
#ifndef __ASSEMBLY__
/* Indicate that x86 has its own track and untrack pfn vma functions */
#define __HAVE_PFNMAP_TRACKING
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- TRACE_IRQS_OFF
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- TRACE_IRQS_OFF
FIXUP_ESPFIX_STACK # %eax == %esp
xorl %edx,%edx # zero error code
call do_nmi
static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
if (p->ainsn.boostable == 1 && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
reset_current_kprobe();
.long sys_uselib
.long sys_swapon
.long sys_reboot
- .long old_readdir
+ .long sys_old_readdir
.long old_mmap /* 90 */
.long sys_munmap
.long sys_truncate
* Reserved non RAM regions only and after successful reserve_memtype,
* this func also keeps identity mapping (if any) in sync with this new prot.
*/
-static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t vma_prot)
+static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
+ int strict_prot)
{
int is_ram = 0;
int id_sz, ret;
unsigned long flags;
- unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
+ unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
is_ram = pagerange_is_ram(paddr, paddr + size);
return ret;
if (flags != want_flags) {
- free_memtype(paddr, paddr + size);
- printk(KERN_ERR
- "%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n",
- current->comm, current->pid,
- cattr_name(want_flags),
- (unsigned long long)paddr,
- (unsigned long long)(paddr + size),
- cattr_name(flags));
- return -EINVAL;
+ if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+ free_memtype(paddr, paddr + size);
+ printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
+ " for %Lx-%Lx, got %s\n",
+ current->comm, current->pid,
+ cattr_name(want_flags),
+ (unsigned long long)paddr,
+ (unsigned long long)(paddr + size),
+ cattr_name(flags));
+ return -EINVAL;
+ }
+ /*
+ * We allow returning different type than the one requested in
+ * non strict case.
+ */
+ *vma_prot = __pgprot((pgprot_val(*vma_prot) &
+ (~_PAGE_CACHE_MASK)) |
+ flags);
}
/* Need to keep identity mapping in sync */
unsigned long vma_start = vma->vm_start;
unsigned long vma_end = vma->vm_end;
unsigned long vma_size = vma_end - vma_start;
+ pgprot_t pgprot;
if (!pat_enabled)
return 0;
WARN_ON_ONCE(1);
return -EINVAL;
}
- return reserve_pfn_range(paddr, vma_size, __pgprot(prot));
+ pgprot = __pgprot(prot);
+ return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
}
/* reserve entire vma page by page, using pfn and prot from pte */
if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
continue;
- retval = reserve_pfn_range(paddr, PAGE_SIZE, __pgprot(prot));
+ pgprot = __pgprot(prot);
+ retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
if (retval)
goto cleanup_ret;
}
* Note that this function can be called with caller trying to map only a
* subrange/page inside the vma.
*/
-int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size)
{
int retval = 0;
if (is_linear_pfn_mapping(vma)) {
/* reserve the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
- return reserve_pfn_range(paddr, vma_size, prot);
+ return reserve_pfn_range(paddr, vma_size, prot, 0);
}
/* reserve page by page using pfn and size */
base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
for (i = 0; i < size; i += PAGE_SIZE) {
paddr = base_paddr + i;
- retval = reserve_pfn_range(paddr, PAGE_SIZE, prot);
+ retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
if (retval)
goto cleanup_ret;
}
return retval;
if (flags != new_flags) {
- /*
- * Do not fallback to certain memory types with certain
- * requested type:
- * - request is uncached, return cannot be write-back
- * - request is uncached, return cannot be write-combine
- * - request is write-combine, return cannot be write-back
- */
- if ((flags == _PAGE_CACHE_UC_MINUS &&
- (new_flags == _PAGE_CACHE_WB)) ||
- (flags == _PAGE_CACHE_WC &&
- new_flags == _PAGE_CACHE_WB)) {
+ if (!is_new_memtype_allowed(flags, new_flags)) {
free_memtype(addr, addr+len);
return -EINVAL;
}
include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
#ifndef _XTENSA_BYTEORDER_H
#define _XTENSA_BYTEORDER_H
-#include <asm/swab.h>
-
#ifdef __XTENSA_EL__
#include <linux/byteorder/little_endian.h>
#elif defined(__XTENSA_EB__)
# sleep related files
obj-y += wakeup.o
-obj-y += main.o
+obj-y += sleep.o
obj-$(CONFIG_ACPI_SLEEP) += proc.o
spinlock_t curr_lock;
} *boot_ec, *first_ec;
-/*
- * Some Asus system have exchanged ECDT data/command IO addresses.
- */
-static int print_ecdt_error(const struct dmi_system_id *id)
-{
- printk(KERN_NOTICE PREFIX "%s detected - "
- "ECDT has exchanged control/data I/O address\n",
- id->ident);
- return 0;
-}
-
-static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
- {
- print_ecdt_error, "Asus L4R", {
- DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
- DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
- DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
- {
- print_ecdt_error, "Asus M6R", {
- DMI_MATCH(DMI_BIOS_VERSION, "0207"),
- DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
- DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
- {},
-};
-
/* --------------------------------------------------------------------------
Transaction Management
-------------------------------------------------------------------------- */
int __init acpi_ec_ecdt_probe(void)
{
acpi_status status;
+ struct acpi_ec *saved_ec = NULL;
struct acpi_table_ecdt *ecdt_ptr;
- acpi_handle dummy;
boot_ec = make_acpi_ec();
if (!boot_ec)
pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
- if (dmi_check_system(ec_dmi_table)) {
- /*
- * If the board falls into ec_dmi_table, it means
- * that ECDT table gives the incorrect command/status
- * & data I/O address. Just fix it.
- */
- boot_ec->data_addr = ecdt_ptr->control.address;
- boot_ec->command_addr = ecdt_ptr->data.address;
- }
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
- /* Add some basic check against completely broken table */
- if (boot_ec->data_addr != boot_ec->command_addr)
+ /* Don't trust ECDT, which comes from ASUSTek */
+ if (!dmi_name_in_vendors("ASUS"))
goto install;
+ saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+ if (!saved_ec)
+ return -ENOMEM;
+ memcpy(&saved_ec, boot_ec, sizeof(saved_ec));
/* fall through */
}
/* This workaround is needed only on some broken machines,
/* Check that acpi_get_devices actually find something */
if (ACPI_FAILURE(status) || !boot_ec->handle)
goto error;
- /* We really need to limit this workaround, the only ASUS,
- * which needs it, has fake EC._INI method, so use it as flag.
- * Keep boot_ec struct as it will be needed soon.
- */
- if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &dummy)))
- return -ENODEV;
+ if (saved_ec) {
+ /* try to find good ECDT from ASUSTek */
+ if (saved_ec->command_addr != boot_ec->command_addr ||
+ saved_ec->data_addr != boot_ec->data_addr ||
+ saved_ec->gpe != boot_ec->gpe ||
+ saved_ec->handle != boot_ec->handle)
+ pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+ "ECDT tables, which are very hard to workaround. "
+ "Trying to use DSDT EC info instead. Please send "
+ "output of acpidump to linux-acpi@vger.kernel.org\n");
+ kfree(saved_ec);
+ saved_ec = NULL;
+ } else {
+ /* We really need to limit this workaround, the only ASUS,
+ * which needs it, has fake EC._INI method, so use it as flag.
+ * Keep boot_ec struct as it will be needed soon.
+ */
+ acpi_handle dummy;
+ if (!dmi_name_in_vendors("ASUS") ||
+ ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI",
+ &dummy)))
+ return -ENODEV;
+ }
install:
if (!ec_install_handlers(boot_ec)) {
first_ec = boot_ec;
}
/* Passive (optional) */
- if (flag & ACPI_TRIPS_PASSIVE) {
+ if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+ (flag == ACPI_TRIPS_INIT)) {
valid = tz->trips.passive.flags.valid;
if (psv == -1) {
status = AE_SUPPORT;
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle, "_PSL",
NULL, &devices);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid passive threshold\n");
tz->trips.passive.flags.valid = 0;
+ }
else
tz->trips.passive.flags.valid = 1;
if (act == -1)
break; /* disable all active trip points */
- if (flag & ACPI_TRIPS_ACTIVE) {
+ if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+ tz->trips.active[i].flags.valid)) {
status = acpi_evaluate_integer(tz->device->handle,
name, NULL, &tmp);
if (ACPI_FAILURE(status)) {
memset(&devices, 0, sizeof(struct acpi_handle_list));
status = acpi_evaluate_reference(tz->device->handle,
name, NULL, &devices);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_WARNING PREFIX
+ "Invalid active%d threshold\n", i);
tz->trips.active[i].flags.valid = 0;
+ }
else
tz->trips.active[i].flags.valid = 1;
If unsure, say N.
+config PATA_OCTEON_CF
+ tristate "OCTEON Boot Bus Compact Flash support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ This option enables a polled compact flash driver for use with
+ compact flash cards attached to the OCTEON boot bus.
+
+ If unsure, say N.
+
config PATA_SCC
tristate "Toshiba's Cell Reference Set IDE support"
depends on PCI && PPC_CELLEB
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
+obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
*/
static const struct ata_timing ata_timing[] = {
-/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
-
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
-
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
-
-/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
+ { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
+ { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
+
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
+
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
+ { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
+ { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
{
- q->setup = EZ(t->setup * 1000, T);
- q->act8b = EZ(t->act8b * 1000, T);
- q->rec8b = EZ(t->rec8b * 1000, T);
- q->cyc8b = EZ(t->cyc8b * 1000, T);
- q->active = EZ(t->active * 1000, T);
- q->recover = EZ(t->recover * 1000, T);
- q->cycle = EZ(t->cycle * 1000, T);
- q->udma = EZ(t->udma * 1000, UT);
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->dmack_hold = EZ(t->dmack_hold * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
}
void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
* RETURNS:
* Zero on success, negative errno on error.
*/
-static int ata_get_identity(struct scsi_device *sdev, void __user *arg)
+static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev,
+ void __user *arg)
{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
u16 __user *dst = arg;
char buf[40];
return rc;
}
-int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
+ int cmd, void __user *arg)
{
int val = -EINVAL, rc = -EINVAL;
return 0;
case HDIO_GET_IDENTITY:
- return ata_get_identity(scsidev, arg);
+ return ata_get_identity(ap, scsidev, arg);
case HDIO_DRIVE_CMD:
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
return rc;
}
+EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl);
+
+int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+{
+ return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host),
+ scsidev, cmd, arg);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
/**
* ata_scsi_qc_new - acquire new ata_queued_cmd reference
qc->cursg_ofs = 0;
}
- /* consumed can be larger than count only for the last transfer */
- WARN_ON_ONCE(qc->cursg && count != consumed);
-
+ /*
+ * There used to be a WARN_ON_ONCE(qc->cursg && count != consumed);
+ * Unfortunately __atapi_pio_bytes doesn't know enough to do the WARN
+ * check correctly as it doesn't know if it is the last request being
+ * made. Somebody should implement a proper sanity check.
+ */
if (bytes)
goto next_sg;
return 0;
module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
-static struct pci_dev *isa_bridge;
+static struct pci_dev *ali_isa_bridge;
/*
* Cable special cases
int port_bit = 4 << link->ap->port_no;
/* If our bridge is an ALI 1533 then do the extra work */
- if (isa_bridge) {
+ if (ali_isa_bridge) {
/* Tristate and re-enable the bus signals */
- pci_read_config_byte(isa_bridge, 0x58, &r);
+ pci_read_config_byte(ali_isa_bridge, 0x58, &r);
r &= ~port_bit;
- pci_write_config_byte(isa_bridge, 0x58, r);
+ pci_write_config_byte(ali_isa_bridge, 0x58, r);
r |= port_bit;
- pci_write_config_byte(isa_bridge, 0x58, r);
+ pci_write_config_byte(ali_isa_bridge, 0x58, r);
}
ata_sff_postreset(link, classes);
}
pci_write_config_byte(pdev, 0x53, tmp);
}
north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
- if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+ if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
- pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
if (pdev->revision == 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
}
pci_dev_put(north);
ata_pci_bmdma_clear_simplex(pdev);
ali_init_chipset(pdev);
- if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
+ if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
- pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+ pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
ppi[0] = &info_20_udma;
}
static int __init ali_init(void)
{
int ret;
- isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+ ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
ret = pci_register_driver(&ali_pci_driver);
if (ret < 0)
- pci_dev_put(isa_bridge);
+ pci_dev_put(ali_isa_bridge);
return ret;
}
static void __exit ali_exit(void)
{
pci_unregister_driver(&ali_pci_driver);
- pci_dev_put(isa_bridge);
+ pci_dev_put(ali_isa_bridge);
}
ATIIXP_IDE_UDMA_MODE = 0x56
};
-static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- static const struct pci_bits atiixp_enable_bits[] = {
- { 0x48, 1, 0x01, 0x00 },
- { 0x48, 1, 0x08, 0x00 }
- };
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_sff_prereset(link, deadline);
-}
-
static int atiixp_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
- .prereset = atiixp_pre_reset,
};
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.udma_mask = 0x3F,
.port_ops = &atiixp_port_ops
};
- const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
+ static const struct pci_bits atiixp_enable_bits[] = {
+ { 0x48, 1, 0x01, 0x00 },
+ { 0x48, 1, 0x08, 0x00 }
+ };
+ const struct ata_port_info *ppi[] = { &info, &info };
+ int i;
+
+ for (i = 0; i < 2; i++)
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
+ ppi[i] = &ata_dummy_port_info;
+
+ return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
}
static const struct pci_device_id atiixp[] = {
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.2"
struct it821x_dev
{
* special. In our case we need to lock the sector count to avoid
* blowing the brains out of the firmware with large LBA48 requests
*
- * FIXME: When FUA appears we need to block FUA too. And SMART and
- * basically we need to filter commands for this chip.
*/
static void it821x_dev_config(struct ata_device *adev)
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &it821x_rdc_port_ops
+ };
+ static const struct ata_port_info info_rdc_11 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
/* No UDMA */
.port_ops = &it821x_rdc_port_ops
};
return rc;
if (pdev->vendor == PCI_VENDOR_ID_RDC) {
- ppi[0] = &info_rdc;
+ /* Deal with Vortex86SX */
+ if (pdev->revision == 0x11)
+ ppi[0] = &info_rdc_11;
+ else
+ ppi[0] = &info_rdc;
} else {
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
--- /dev/null
+/*
+ * Driver for the Octeon bootbus compact flash.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 - 2009 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/octeon/octeon.h>
+
+/*
+ * The Octeon bootbus compact flash interface is connected in at least
+ * 3 different configurations on various evaluation boards:
+ *
+ * -- 8 bits no irq, no DMA
+ * -- 16 bits no irq, no DMA
+ * -- 16 bits True IDE mode with DMA, but no irq.
+ *
+ * In the last case the DMA engine can generate an interrupt when the
+ * transfer is complete. For the first two cases only PIO is supported.
+ *
+ */
+
+#define DRV_NAME "pata_octeon_cf"
+#define DRV_VERSION "2.1"
+
+
+struct octeon_cf_port {
+ struct workqueue_struct *wq;
+ struct delayed_work delayed_finish;
+ struct ata_port *ap;
+ int dma_finished;
+};
+
+static struct scsi_host_template octeon_cf_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+/**
+ * Convert nanosecond based time to setting used in the
+ * boot bus timing register, based on timing multiple
+ */
+static unsigned int ns_to_tim_reg(unsigned int tim_mult, unsigned int nsecs)
+{
+ unsigned int val;
+
+ /*
+ * Compute # of eclock periods to get desired duration in
+ * nanoseconds.
+ */
+ val = DIV_ROUND_UP(nsecs * (octeon_get_clock_rate() / 1000000),
+ 1000 * tim_mult);
+
+ return val;
+}
+
+static void octeon_cf_set_boot_reg_cfg(int cs)
+{
+ union cvmx_mio_boot_reg_cfgx reg_cfg;
+ reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
+ reg_cfg.s.dmack = 0; /* Don't assert DMACK on access */
+ reg_cfg.s.tim_mult = 2; /* Timing mutiplier 2x */
+ reg_cfg.s.rd_dly = 0; /* Sample on falling edge of BOOT_OE */
+ reg_cfg.s.sam = 0; /* Don't combine write and output enable */
+ reg_cfg.s.we_ext = 0; /* No write enable extension */
+ reg_cfg.s.oe_ext = 0; /* No read enable extension */
+ reg_cfg.s.en = 1; /* Enable this region */
+ reg_cfg.s.orbit = 0; /* Don't combine with previous region */
+ reg_cfg.s.ale = 0; /* Don't do address multiplexing */
+ cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64);
+}
+
+/**
+ * Called after libata determines the needed PIO mode. This
+ * function programs the Octeon bootbus regions to support the
+ * timing requirements of the PIO mode.
+ *
+ * @ap: ATA port information
+ * @dev: ATA device
+ */
+static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
+{
+ struct octeon_cf_data *ocd = ap->dev->platform_data;
+ union cvmx_mio_boot_reg_timx reg_tim;
+ int cs = ocd->base_region;
+ int T;
+ struct ata_timing timing;
+
+ int use_iordy;
+ int trh;
+ int pause;
+ /* These names are timing parameters from the ATA spec */
+ int t1;
+ int t2;
+ int t2i;
+
+ T = (int)(2000000000000LL / octeon_get_clock_rate());
+
+ if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T))
+ BUG();
+
+ t1 = timing.setup;
+ if (t1)
+ t1--;
+ t2 = timing.active;
+ if (t2)
+ t2--;
+ t2i = timing.act8b;
+ if (t2i)
+ t2i--;
+
+ trh = ns_to_tim_reg(2, 20);
+ if (trh)
+ trh--;
+
+ pause = timing.cycle - timing.active - timing.setup - trh;
+ if (pause)
+ pause--;
+
+ octeon_cf_set_boot_reg_cfg(cs);
+ if (ocd->dma_engine >= 0)
+ /* True IDE mode, program both chip selects. */
+ octeon_cf_set_boot_reg_cfg(cs + 1);
+
+
+ use_iordy = ata_pio_need_iordy(dev);
+
+ reg_tim.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_TIMX(cs));
+ /* Disable page mode */
+ reg_tim.s.pagem = 0;
+ /* Enable dynamic timing */
+ reg_tim.s.waitm = use_iordy;
+ /* Pages are disabled */
+ reg_tim.s.pages = 0;
+ /* We don't use multiplexed address mode */
+ reg_tim.s.ale = 0;
+ /* Not used */
+ reg_tim.s.page = 0;
+ /* Time after IORDY to coninue to assert the data */
+ reg_tim.s.wait = 0;
+ /* Time to wait to complete the cycle. */
+ reg_tim.s.pause = pause;
+ /* How long to hold after a write to de-assert CE. */
+ reg_tim.s.wr_hld = trh;
+ /* How long to wait after a read to de-assert CE. */
+ reg_tim.s.rd_hld = trh;
+ /* How long write enable is asserted */
+ reg_tim.s.we = t2;
+ /* How long read enable is asserted */
+ reg_tim.s.oe = t2;
+ /* Time after CE that read/write starts */
+ reg_tim.s.ce = ns_to_tim_reg(2, 5);
+ /* Time before CE that address is valid */
+ reg_tim.s.adr = 0;
+
+ /* Program the bootbus region timing for the data port chip select. */
+ cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs), reg_tim.u64);
+ if (ocd->dma_engine >= 0)
+ /* True IDE mode, program both chip selects. */
+ cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs + 1), reg_tim.u64);
+}
+
+static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
+{
+ struct octeon_cf_data *ocd = dev->link->ap->dev->platform_data;
+ union cvmx_mio_boot_dma_timx dma_tim;
+ unsigned int oe_a;
+ unsigned int oe_n;
+ unsigned int dma_ackh;
+ unsigned int dma_arq;
+ unsigned int pause;
+ unsigned int T0, Tkr, Td;
+ unsigned int tim_mult;
+
+ const struct ata_timing *timing;
+
+ timing = ata_timing_find_mode(dev->dma_mode);
+ T0 = timing->cycle;
+ Td = timing->active;
+ Tkr = timing->recover;
+ dma_ackh = timing->dmack_hold;
+
+ dma_tim.u64 = 0;
+ /* dma_tim.s.tim_mult = 0 --> 4x */
+ tim_mult = 4;
+
+ /* not spec'ed, value in eclocks, not affected by tim_mult */
+ dma_arq = 8;
+ pause = 25 - dma_arq * 1000 /
+ (octeon_get_clock_rate() / 1000000); /* Tz */
+
+ oe_a = Td;
+ /* Tkr from cf spec, lengthened to meet T0 */
+ oe_n = max(T0 - oe_a, Tkr);
+
+ dma_tim.s.dmack_pi = 1;
+
+ dma_tim.s.oe_n = ns_to_tim_reg(tim_mult, oe_n);
+ dma_tim.s.oe_a = ns_to_tim_reg(tim_mult, oe_a);
+
+ /*
+ * This is tI, C.F. spec. says 0, but Sony CF card requires
+ * more, we use 20 nS.
+ */
+ dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20);;
+ dma_tim.s.dmack_h = ns_to_tim_reg(tim_mult, dma_ackh);
+
+ dma_tim.s.dmarq = dma_arq;
+ dma_tim.s.pause = ns_to_tim_reg(tim_mult, pause);
+
+ dma_tim.s.rd_dly = 0; /* Sample right on edge */
+
+ /* writes only */
+ dma_tim.s.we_n = ns_to_tim_reg(tim_mult, oe_n);
+ dma_tim.s.we_a = ns_to_tim_reg(tim_mult, oe_a);
+
+ pr_debug("ns to ticks (mult %d) of %d is: %d\n", tim_mult, 60,
+ ns_to_tim_reg(tim_mult, 60));
+ pr_debug("oe_n: %d, oe_a: %d, dmack_s: %d, dmack_h: "
+ "%d, dmarq: %d, pause: %d\n",
+ dma_tim.s.oe_n, dma_tim.s.oe_a, dma_tim.s.dmack_s,
+ dma_tim.s.dmack_h, dma_tim.s.dmarq, dma_tim.s.pause);
+
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_TIMX(ocd->dma_engine),
+ dma_tim.u64);
+
+}
+
+/**
+ * Handle an 8 bit I/O request.
+ *
+ * @dev: Device to access
+ * @buffer: Data buffer
+ * @buflen: Length of the buffer.
+ * @rw: True to write.
+ */
+static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
+ unsigned char *buffer,
+ unsigned int buflen,
+ int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned long words;
+ int count;
+
+ words = buflen;
+ if (rw) {
+ count = 16;
+ while (words--) {
+ iowrite8(*buffer, data_addr);
+ buffer++;
+ /*
+ * Every 16 writes do a read so the bootbus
+ * FIFO doesn't fill up.
+ */
+ if (--count == 0) {
+ ioread8(ap->ioaddr.altstatus_addr);
+ count = 16;
+ }
+ }
+ } else {
+ ioread8_rep(data_addr, buffer, words);
+ }
+ return buflen;
+}
+
+/**
+ * Handle a 16 bit I/O request.
+ *
+ * @dev: Device to access
+ * @buffer: Data buffer
+ * @buflen: Length of the buffer.
+ * @rw: True to write.
+ */
+static unsigned int octeon_cf_data_xfer16(struct ata_device *dev,
+ unsigned char *buffer,
+ unsigned int buflen,
+ int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned long words;
+ int count;
+
+ words = buflen / 2;
+ if (rw) {
+ count = 16;
+ while (words--) {
+ iowrite16(*(uint16_t *)buffer, data_addr);
+ buffer += sizeof(uint16_t);
+ /*
+ * Every 16 writes do a read so the bootbus
+ * FIFO doesn't fill up.
+ */
+ if (--count == 0) {
+ ioread8(ap->ioaddr.altstatus_addr);
+ count = 16;
+ }
+ }
+ } else {
+ while (words--) {
+ *(uint16_t *)buffer = ioread16(data_addr);
+ buffer += sizeof(uint16_t);
+ }
+ }
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ __le16 align_buf[1] = { 0 };
+
+ if (rw == READ) {
+ align_buf[0] = cpu_to_le16(ioread16(data_addr));
+ memcpy(buffer, align_buf, 1);
+ } else {
+ memcpy(align_buf, buffer, 1);
+ iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+ }
+ words++;
+ }
+ return buflen;
+}
+
+/**
+ * Read the taskfile for 16bit non-True IDE only.
+ */
+static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ u16 blob;
+ /* The base of the registers is at ioaddr.data_addr. */
+ void __iomem *base = ap->ioaddr.data_addr;
+
+ blob = __raw_readw(base + 0xc);
+ tf->feature = blob >> 8;
+
+ blob = __raw_readw(base + 2);
+ tf->nsect = blob & 0xff;
+ tf->lbal = blob >> 8;
+
+ blob = __raw_readw(base + 4);
+ tf->lbam = blob & 0xff;
+ tf->lbah = blob >> 8;
+
+ blob = __raw_readw(base + 6);
+ tf->device = blob & 0xff;
+ tf->command = blob >> 8;
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ if (likely(ap->ioaddr.ctl_addr)) {
+ iowrite8(tf->ctl | ATA_HOB, ap->ioaddr.ctl_addr);
+
+ blob = __raw_readw(base + 0xc);
+ tf->hob_feature = blob >> 8;
+
+ blob = __raw_readw(base + 2);
+ tf->hob_nsect = blob & 0xff;
+ tf->hob_lbal = blob >> 8;
+
+ blob = __raw_readw(base + 4);
+ tf->hob_lbam = blob & 0xff;
+ tf->hob_lbah = blob >> 8;
+
+ iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+ ap->last_ctl = tf->ctl;
+ } else {
+ WARN_ON(1);
+ }
+ }
+}
+
+static u8 octeon_cf_check_status16(struct ata_port *ap)
+{
+ u16 blob;
+ void __iomem *base = ap->ioaddr.data_addr;
+
+ blob = __raw_readw(base + 6);
+ return blob >> 8;
+}
+
+static int octeon_cf_softreset16(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *base = ap->ioaddr.data_addr;
+ int rc;
+ u8 err;
+
+ DPRINTK("about to softreset\n");
+ __raw_writew(ap->ctl, base + 0xe);
+ udelay(20);
+ __raw_writew(ap->ctl | ATA_SRST, base + 0xe);
+ udelay(20);
+ __raw_writew(ap->ctl, base + 0xe);
+
+ rc = ata_sff_wait_after_reset(link, 1, deadline);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ return rc;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_sff_dev_classify(&link->device[0], 1, &err);
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+}
+
+/**
+ * Load the taskfile for 16bit non-True IDE only. The device_addr is
+ * not loaded, we do this as part of octeon_cf_exec_command16.
+ */
+static void octeon_cf_tf_load16(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+ /* The base of the registers is at ioaddr.data_addr. */
+ void __iomem *base = ap->ioaddr.data_addr;
+
+ if (tf->ctl != ap->last_ctl) {
+ iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ __raw_writew(tf->hob_feature << 8, base + 0xc);
+ __raw_writew(tf->hob_nsect | tf->hob_lbal << 8, base + 2);
+ __raw_writew(tf->hob_lbam | tf->hob_lbah << 8, base + 4);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+ if (is_addr) {
+ __raw_writew(tf->feature << 8, base + 0xc);
+ __raw_writew(tf->nsect | tf->lbal << 8, base + 2);
+ __raw_writew(tf->lbam | tf->lbah << 8, base + 4);
+ VPRINTK("feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+ ata_wait_idle(ap);
+}
+
+
+static void octeon_cf_dev_select(struct ata_port *ap, unsigned int device)
+{
+/* There is only one device, do nothing. */
+ return;
+}
+
+/*
+ * Issue ATA command to host controller. The device_addr is also sent
+ * as it must be written in a combined write with the command.
+ */
+static void octeon_cf_exec_command16(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ /* The base of the registers is at ioaddr.data_addr. */
+ void __iomem *base = ap->ioaddr.data_addr;
+ u16 blob;
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ VPRINTK("device 0x%X\n", tf->device);
+ blob = tf->device;
+ } else {
+ blob = 0;
+ }
+
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+ blob |= (tf->command << 8);
+ __raw_writew(blob, base + 6);
+
+
+ ata_wait_idle(ap);
+}
+
+static u8 octeon_cf_irq_on(struct ata_port *ap)
+{
+ return 0;
+}
+
+static void octeon_cf_irq_clear(struct ata_port *ap)
+{
+ return;
+}
+
+static void octeon_cf_dma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct octeon_cf_port *cf_port;
+
+ cf_port = (struct octeon_cf_port *)ap->private_data;
+ DPRINTK("ENTER\n");
+ /* issue r/w command */
+ qc->cursg = qc->sg;
+ cf_port->dma_finished = 0;
+ ap->ops->sff_exec_command(ap, &qc->tf);
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * Start a DMA transfer that was already setup
+ *
+ * @qc: Information about the DMA
+ */
+static void octeon_cf_dma_start(struct ata_queued_cmd *qc)
+{
+ struct octeon_cf_data *ocd = qc->ap->dev->platform_data;
+ union cvmx_mio_boot_dma_cfgx mio_boot_dma_cfg;
+ union cvmx_mio_boot_dma_intx mio_boot_dma_int;
+ struct scatterlist *sg;
+
+ VPRINTK("%d scatterlists\n", qc->n_elem);
+
+ /* Get the scatter list entry we need to DMA into */
+ sg = qc->cursg;
+ BUG_ON(!sg);
+
+ /*
+ * Clear the DMA complete status.
+ */
+ mio_boot_dma_int.u64 = 0;
+ mio_boot_dma_int.s.done = 1;
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+ mio_boot_dma_int.u64);
+
+ /* Enable the interrupt. */
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine),
+ mio_boot_dma_int.u64);
+
+ /* Set the direction of the DMA */
+ mio_boot_dma_cfg.u64 = 0;
+ mio_boot_dma_cfg.s.en = 1;
+ mio_boot_dma_cfg.s.rw = ((qc->tf.flags & ATA_TFLAG_WRITE) != 0);
+
+ /*
+ * Don't stop the DMA if the device deasserts DMARQ. Many
+ * compact flashes deassert DMARQ for a short time between
+ * sectors. Instead of stopping and restarting the DMA, we'll
+ * let the hardware do it. If the DMA is really stopped early
+ * due to an error condition, a later timeout will force us to
+ * stop.
+ */
+ mio_boot_dma_cfg.s.clr = 0;
+
+ /* Size is specified in 16bit words and minus one notation */
+ mio_boot_dma_cfg.s.size = sg_dma_len(sg) / 2 - 1;
+
+ /* We need to swap the high and low bytes of every 16 bits */
+ mio_boot_dma_cfg.s.swap8 = 1;
+
+ mio_boot_dma_cfg.s.adr = sg_dma_address(sg);
+
+ VPRINTK("%s %d bytes address=%p\n",
+ (mio_boot_dma_cfg.s.rw) ? "write" : "read", sg->length,
+ (void *)(unsigned long)mio_boot_dma_cfg.s.adr);
+
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine),
+ mio_boot_dma_cfg.u64);
+}
+
+/**
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static unsigned int octeon_cf_dma_finished(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct octeon_cf_data *ocd = ap->dev->platform_data;
+ union cvmx_mio_boot_dma_cfgx dma_cfg;
+ union cvmx_mio_boot_dma_intx dma_int;
+ struct octeon_cf_port *cf_port;
+ u8 status;
+
+ VPRINTK("ata%u: protocol %d task_state %d\n",
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+
+ if (ap->hsm_task_state != HSM_ST_LAST)
+ return 0;
+
+ cf_port = (struct octeon_cf_port *)ap->private_data;
+
+ dma_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+ if (dma_cfg.s.size != 0xfffff) {
+ /* Error, the transfer was not complete. */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+
+ /* Stop and clear the dma engine. */
+ dma_cfg.u64 = 0;
+ dma_cfg.s.size = -1;
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine), dma_cfg.u64);
+
+ /* Disable the interrupt. */
+ dma_int.u64 = 0;
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine), dma_int.u64);
+
+ /* Clear the DMA complete status */
+ dma_int.s.done = 1;
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine), dma_int.u64);
+
+ status = ap->ops->sff_check_status(ap);
+
+ ata_sff_hsm_move(ap, qc, status, 0);
+
+ if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA))
+ ata_ehi_push_desc(ehi, "DMA stat 0x%x", status);
+
+ return 1;
+}
+
+/*
+ * Check if any queued commands have more DMAs, if so start the next
+ * transfer, else do end of transfer handling.
+ */
+static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct octeon_cf_port *cf_port;
+ int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ DPRINTK("ENTER\n");
+ for (i = 0; i < host->n_ports; i++) {
+ u8 status;
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ union cvmx_mio_boot_dma_intx dma_int;
+ union cvmx_mio_boot_dma_cfgx dma_cfg;
+ struct octeon_cf_data *ocd;
+
+ ap = host->ports[i];
+ ocd = ap->dev->platform_data;
+ if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+ continue;
+
+ ocd = ap->dev->platform_data;
+ cf_port = (struct octeon_cf_port *)ap->private_data;
+ dma_int.u64 =
+ cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
+ dma_cfg.u64 =
+ cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE)) {
+ if (dma_int.s.done && !dma_cfg.s.en) {
+ if (!sg_is_last(qc->cursg)) {
+ qc->cursg = sg_next(qc->cursg);
+ handled = 1;
+ octeon_cf_dma_start(qc);
+ continue;
+ } else {
+ cf_port->dma_finished = 1;
+ }
+ }
+ if (!cf_port->dma_finished)
+ continue;
+ status = ioread8(ap->ioaddr.altstatus_addr);
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ /*
+ * We are busy, try to handle it
+ * later. This is the DMA finished
+ * interrupt, and it could take a
+ * little while for the card to be
+ * ready for more commands.
+ */
+ /* Clear DMA irq. */
+ dma_int.u64 = 0;
+ dma_int.s.done = 1;
+ cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+ dma_int.u64);
+
+ queue_delayed_work(cf_port->wq,
+ &cf_port->delayed_finish, 1);
+ handled = 1;
+ } else {
+ handled |= octeon_cf_dma_finished(ap, qc);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ DPRINTK("EXIT\n");
+ return IRQ_RETVAL(handled);
+}
+
+static void octeon_cf_delayed_finish(struct work_struct *work)
+{
+ struct octeon_cf_port *cf_port = container_of(work,
+ struct octeon_cf_port,
+ delayed_finish.work);
+ struct ata_port *ap = cf_port->ap;
+ struct ata_host *host = ap->host;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ u8 status;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * If the port is not waiting for completion, it must have
+ * handled it previously. The hsm_task_state is
+ * protected by host->lock.
+ */
+ if (ap->hsm_task_state != HSM_ST_LAST || !cf_port->dma_finished)
+ goto out;
+
+ status = ioread8(ap->ioaddr.altstatus_addr);
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ /* Still busy, try again. */
+ queue_delayed_work(cf_port->wq,
+ &cf_port->delayed_finish, 1);
+ goto out;
+ }
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
+ octeon_cf_dma_finished(ap, qc);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void octeon_cf_dev_config(struct ata_device *dev)
+{
+ /*
+ * A maximum of 2^20 - 1 16 bit transfers are possible with
+ * the bootbus DMA. So we need to throttle max_sectors to
+ * (2^12 - 1 == 4095) to assure that this can never happen.
+ */
+ dev->max_sectors = min(dev->max_sectors, 4095U);
+}
+
+/*
+ * Trap if driver tries to do standard bmdma commands. They are not
+ * supported.
+ */
+static void unreachable_qc(struct ata_queued_cmd *qc)
+{
+ BUG();
+}
+
+static u8 unreachable_port(struct ata_port *ap)
+{
+ BUG();
+}
+
+/*
+ * We don't do ATAPI DMA so return 0.
+ */
+static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 0;
+}
+
+static unsigned int octeon_cf_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ octeon_cf_dma_setup(qc); /* set up dma */
+ octeon_cf_dma_start(qc); /* initiate dma */
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+
+ case ATAPI_PROT_DMA:
+ dev_err(ap->dev, "Error, ATAPI not supported\n");
+ BUG();
+
+ default:
+ return ata_sff_qc_issue(qc);
+ }
+
+ return 0;
+}
+
+static struct ata_port_operations octeon_cf_ops = {
+ .inherits = &ata_sff_port_ops,
+ .check_atapi_dma = octeon_cf_check_atapi_dma,
+ .qc_prep = ata_noop_qc_prep,
+ .qc_issue = octeon_cf_qc_issue,
+ .sff_dev_select = octeon_cf_dev_select,
+ .sff_irq_on = octeon_cf_irq_on,
+ .sff_irq_clear = octeon_cf_irq_clear,
+ .bmdma_setup = unreachable_qc,
+ .bmdma_start = unreachable_qc,
+ .bmdma_stop = unreachable_qc,
+ .bmdma_status = unreachable_port,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = octeon_cf_set_piomode,
+ .set_dmamode = octeon_cf_set_dmamode,
+ .dev_config = octeon_cf_dev_config,
+};
+
+static int __devinit octeon_cf_probe(struct platform_device *pdev)
+{
+ struct resource *res_cs0, *res_cs1;
+
+ void __iomem *cs0;
+ void __iomem *cs1 = NULL;
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct octeon_cf_data *ocd;
+ int irq = 0;
+ irq_handler_t irq_handler = NULL;
+ void __iomem *base;
+ struct octeon_cf_port *cf_port;
+
+ res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!res_cs0)
+ return -EINVAL;
+
+ ocd = pdev->dev.platform_data;
+
+ cs0 = devm_ioremap_nocache(&pdev->dev, res_cs0->start,
+ res_cs0->end - res_cs0->start + 1);
+
+ if (!cs0)
+ return -ENOMEM;
+
+ /* Determine from availability of DMA if True IDE mode or not */
+ if (ocd->dma_engine >= 0) {
+ res_cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res_cs1)
+ return -EINVAL;
+
+ cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
+ res_cs0->end - res_cs1->start + 1);
+
+ if (!cs1)
+ return -ENOMEM;
+ }
+
+ cf_port = kzalloc(sizeof(*cf_port), GFP_KERNEL);
+ if (!cf_port)
+ return -ENOMEM;
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto free_cf_port;
+
+ ap = host->ports[0];
+ ap->private_data = cf_port;
+ cf_port->ap = ap;
+ ap->ops = &octeon_cf_ops;
+ ap->pio_mask = 0x7f; /* Support PIO 0-6 */
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
+ | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING;
+
+ base = cs0 + ocd->base_region_bias;
+ if (!ocd->is16bit) {
+ ap->ioaddr.cmd_addr = base;
+ ata_sff_std_ports(&ap->ioaddr);
+
+ ap->ioaddr.altstatus_addr = base + 0xe;
+ ap->ioaddr.ctl_addr = base + 0xe;
+ octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer8;
+ } else if (cs1) {
+ /* Presence of cs1 indicates True IDE mode. */
+ ap->ioaddr.cmd_addr = base + (ATA_REG_CMD << 1) + 1;
+ ap->ioaddr.data_addr = base + (ATA_REG_DATA << 1);
+ ap->ioaddr.error_addr = base + (ATA_REG_ERR << 1) + 1;
+ ap->ioaddr.feature_addr = base + (ATA_REG_FEATURE << 1) + 1;
+ ap->ioaddr.nsect_addr = base + (ATA_REG_NSECT << 1) + 1;
+ ap->ioaddr.lbal_addr = base + (ATA_REG_LBAL << 1) + 1;
+ ap->ioaddr.lbam_addr = base + (ATA_REG_LBAM << 1) + 1;
+ ap->ioaddr.lbah_addr = base + (ATA_REG_LBAH << 1) + 1;
+ ap->ioaddr.device_addr = base + (ATA_REG_DEVICE << 1) + 1;
+ ap->ioaddr.status_addr = base + (ATA_REG_STATUS << 1) + 1;
+ ap->ioaddr.command_addr = base + (ATA_REG_CMD << 1) + 1;
+ ap->ioaddr.altstatus_addr = cs1 + (6 << 1) + 1;
+ ap->ioaddr.ctl_addr = cs1 + (6 << 1) + 1;
+ octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
+
+ ap->mwdma_mask = 0x1f; /* Support MWDMA 0-4 */
+ irq = platform_get_irq(pdev, 0);
+ irq_handler = octeon_cf_interrupt;
+
+ /* True IDE mode needs delayed work to poll for not-busy. */
+ cf_port->wq = create_singlethread_workqueue(DRV_NAME);
+ if (!cf_port->wq)
+ goto free_cf_port;
+ INIT_DELAYED_WORK(&cf_port->delayed_finish,
+ octeon_cf_delayed_finish);
+
+ } else {
+ /* 16 bit but not True IDE */
+ octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
+ octeon_cf_ops.softreset = octeon_cf_softreset16;
+ octeon_cf_ops.sff_check_status = octeon_cf_check_status16;
+ octeon_cf_ops.sff_tf_read = octeon_cf_tf_read16;
+ octeon_cf_ops.sff_tf_load = octeon_cf_tf_load16;
+ octeon_cf_ops.sff_exec_command = octeon_cf_exec_command16;
+
+ ap->ioaddr.data_addr = base + ATA_REG_DATA;
+ ap->ioaddr.nsect_addr = base + ATA_REG_NSECT;
+ ap->ioaddr.lbal_addr = base + ATA_REG_LBAL;
+ ap->ioaddr.ctl_addr = base + 0xe;
+ ap->ioaddr.altstatus_addr = base + 0xe;
+ }
+
+ ata_port_desc(ap, "cmd %p ctl %p", base, ap->ioaddr.ctl_addr);
+
+
+ dev_info(&pdev->dev, "version " DRV_VERSION" %d bit%s.\n",
+ (ocd->is16bit) ? 16 : 8,
+ (cs1) ? ", True IDE" : "");
+
+
+ return ata_host_activate(host, irq, irq_handler, 0, &octeon_cf_sht);
+
+free_cf_port:
+ kfree(cf_port);
+ return -ENOMEM;
+}
+
+static struct platform_driver octeon_cf_driver = {
+ .probe = octeon_cf_probe,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init octeon_cf_init(void)
+{
+ return platform_driver_register(&octeon_cf_driver);
+}
+
+
+MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
+MODULE_DESCRIPTION("low-level driver for Cavium OCTEON Compact Flash PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_cf_init);
static int sata_fsl_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- int retval = 0;
+ int retval = -ENXIO;
void __iomem *hcr_base = NULL;
void __iomem *ssr_base = NULL;
void __iomem *csr_base = NULL;
{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
+ { PCI_VDEVICE(VIA, 0x9000), vt8251 },
+ { PCI_VDEVICE(VIA, 0x9040), vt8251 },
{ } /* terminate list */
};
ret = sysfs_create_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
if (ret) {
printk(KERN_ERR "nbd: sysfs_create_file failed!");
+ lo->pid = 0;
return ret;
}
nbd_end_request(req);
sysfs_remove_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+ lo->pid = 0;
return 0;
}
set_capacity(lo->disk, lo->bytesize >> 9);
return 0;
case NBD_DO_IT:
+ if (lo->pid)
+ return -EBUSY;
if (!lo->file)
return -EINVAL;
thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
start_sector = req->sector * priv->blocking_factor;
sectors = req->nr_sectors * priv->blocking_factor;
- dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+ dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
__func__, __LINE__, op, sectors, start_sector);
if (write) {
LV1_STORAGE_ATA_HDDOUT, 0, 0, 0,
0, &dev->tag);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
__func__, __LINE__, res);
end_request(req, 0);
return 0;
if (tag != dev->tag)
dev_err(&dev->sbd.core,
- "%s:%u: tag mismatch, got %lx, expected %lx\n",
+ "%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
__func__, __LINE__, res, status);
return IRQ_HANDLED;
}
op = read ? "read" : "write";
}
if (status) {
- dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+ dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
__LINE__, op, status);
error = -EIO;
} else {
res = ps3stor_send_command(dev, LV1_STORAGE_ATA_HDDOUT, 0, 0, 0, 0);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
__func__, __LINE__, res);
return -EIO;
}
sizeof(ata_cmnd), ata_cmnd.buffer,
ata_cmnd.arglen);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%llx\n",
__func__, __LINE__, res);
return -EIO;
}
if (dev->blk_size < 512) {
dev_err(&dev->sbd.core,
- "%s:%u: cannot handle block size %lu\n", __func__,
+ "%s:%u: cannot handle block size %llu\n", __func__,
__LINE__, dev->blk_size);
return -EINVAL;
}
dev->regions[dev->region_idx].size*priv->blocking_factor);
dev_info(&dev->sbd.core,
- "%s is a %s (%lu MiB total, %lu MiB for OtherOS)\n",
+ "%s is a %s (%llu MiB total, %lu MiB for OtherOS)\n",
gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
get_capacity(gendisk) >> 11);
{ .compatible = "xlnx,opb-sysace-1.00.b", },
{ .compatible = "xlnx,opb-sysace-1.00.c", },
{ .compatible = "xlnx,xps-sysace-1.00.a", },
+ { .compatible = "xlnx,sysace", },
{},
};
MODULE_DEVICE_TABLE(of, ace_of_match);
bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct bsr_dev *bsr_dev = dev_get_drvdata(dev);
- return sprintf(buf, "%lu\n", bsr_dev->bsr_len);
+ return sprintf(buf, "%llu\n", bsr_dev->bsr_len);
}
static struct device_attribute bsr_dev_attrs[] = {
} /* else count == 0 */
tty->driver_data = hp;
- tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
hp->tty = tty;
return ERR_PTR(err);
}
- hp = kmalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
+ hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
GFP_KERNEL);
if (!hp)
return ERR_PTR(-ENOMEM);
- memset(hp, 0x00, sizeof(*hp));
-
hp->vtermno = vtermno;
hp->data = data;
hp->ops = ops;
goto stop_thread;
}
- /* FIXME: This mb() seems completely random. Remove it. */
- mb();
+ /*
+ * Make sure tty is fully registered before allowing it to be
+ * found by hvc_console_device.
+ */
+ smp_mb();
hvc_driver = drv;
return 0;
void notifier_del_irq(struct hvc_struct *hp, int irq)
{
- if (!irq)
+ if (!hp->irq_requested)
return;
free_irq(irq, hp);
hp->irq_requested = 0;
u64 res = ps3stor_read_write_sectors(dev, lpar, start_sector, sectors,
write);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+ dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
__LINE__, write ? "write" : "read", res);
return -EIO;
}
max_sectors = dev->bounce_size / dev->blk_size;
if (sectors > max_sectors) {
- dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %lu\n",
+ dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %llu\n",
__func__, __LINE__, max_sectors);
sectors = max_sectors;
}
goto fail;
}
- n = min(remaining, sectors_read*dev->blk_size-offset);
+ n = min_t(u64, remaining, sectors_read*dev->blk_size-offset);
dev_dbg(&dev->sbd.core,
"%s:%u: copy %lu bytes from 0x%p to user 0x%p\n",
__func__, __LINE__, n, dev->bounce_buf+offset, buf);
if (end_read_sector >= start_read_sector) {
/* Merge head and tail */
dev_dbg(&dev->sbd.core,
- "Merged head and tail: %lu sectors at %lu\n",
+ "Merged head and tail: %llu sectors at %llu\n",
chunk_sectors, start_write_sector);
res = ps3flash_read_sectors(dev, start_write_sector,
chunk_sectors, 0);
if (head) {
/* Read head */
dev_dbg(&dev->sbd.core,
- "head: %lu sectors at %lu\n", head,
+ "head: %llu sectors at %llu\n", head,
start_write_sector);
res = ps3flash_read_sectors(dev,
start_write_sector,
start_write_sector+chunk_sectors) {
/* Read tail */
dev_dbg(&dev->sbd.core,
- "tail: %lu sectors at %lu\n", tail,
+ "tail: %llu sectors at %llu\n", tail,
start_read_sector);
sec_off = start_read_sector-start_write_sector;
res = ps3flash_read_sectors(dev,
}
}
- n = min(remaining, dev->bounce_size-offset);
+ n = min_t(u64, remaining, dev->bounce_size-offset);
dev_dbg(&dev->sbd.core,
"%s:%u: copy %lu bytes from user 0x%p to 0x%p\n",
__func__, __LINE__, n, buf, dev->bounce_buf+offset);
if (tag != dev->tag)
dev_err(&dev->sbd.core,
- "%s:%u: tag mismatch, got %lx, expected %lx\n",
+ "%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
__func__, __LINE__, res, status);
} else {
dev->lv1_status = status;
/*
- * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
- *
* Device driver for Microgate SyncLink GT serial adapters.
*
* written by Paul Fulghum for Microgate Corporation
* module identification
*/
static char *driver_name = "SyncLink GT";
-static char *driver_version = "$Revision: 4.50 $";
static char *tty_driver_name = "synclink_gt";
static char *tty_dev_prefix = "ttySLG";
MODULE_LICENSE("GPL");
off_t begin = 0;
struct slgt_info *info;
- len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
+ len += sprintf(page, "synclink_gt driver\n");
info = slgt_device_list;
while( info ) {
info->ri_chkcount = 0;
info->dsr_chkcount = 0;
- slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
+ slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
get_signals(info);
if (info->netcount ||
struct slgt_info *info;
struct slgt_info *tmp;
- printk("unload %s %s\n", driver_name, driver_version);
+ printk(KERN_INFO "unload %s\n", driver_name);
if (serial_driver) {
for (info=slgt_device_list ; info != NULL ; info=info->next_device)
{
int rc;
- printk("%s %s\n", driver_name, driver_version);
+ printk(KERN_INFO "%s\n", driver_name);
serial_driver = alloc_tty_driver(MAX_DEVICES);
if (!serial_driver) {
goto error;
}
- printk("%s %s, tty major#%d\n",
- driver_name, driver_version,
- serial_driver->major);
+ printk(KERN_INFO "%s, tty major#%d\n",
+ driver_name, serial_driver->major);
slgt_device_count = 0;
if ((rc = pci_register_driver(&pci_driver)) < 0) {
unsigned long flags;
spin_lock_irqsave(&sysrq_key_table_lock, flags);
+ /*
+ * Raise the apparent loglevel to maximum so that the sysrq header
+ * is shown to provide the user with positive feedback. We do not
+ * simply emit this at KERN_EMERG as that would change message
+ * routing in the consumers of /proc/kmsg.
+ */
orig_log_level = console_loglevel;
console_loglevel = 7;
printk(KERN_INFO "SysRq : ");
if (retval)
return retval;
- ld = tty_ldisc_ref(tty);
+ ld = tty_ldisc_ref_wait(tty);
switch (arg) {
case TCIFLUSH:
if (ld && ld->ops->flush_buffer)
int i, ret;
pdata = spi->dev.platform_data;
- if (!pdata || !pdata->base)
- return -ENODEV;
+ if (!pdata || !pdata->base) {
+ dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+ return -EINVAL;
+ }
/*
* bits_per_word cannot be configured in platform data
int ret, nr_port;
pdata = client->dev.platform_data;
- if (pdata == NULL)
- return -ENODEV;
+ if (pdata == NULL) {
+ dev_dbg(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
if (chip == NULL)
unsigned base;
pdata = spi->dev.platform_data;
- if (!pdata || !gpio_is_valid(pdata->base))
- return -ENODEV;
+ if (!pdata || !gpio_is_valid(pdata->base)) {
+ dev_dbg(&spi->dev, "invalid or missing platform data\n");
+ return -EINVAL;
+ }
for (addr = 0; addr < 4; addr++) {
if (!pdata->chip[addr].is_present)
int ret;
pdata = client->dev.platform_data;
- if (pdata == NULL)
- return -ENODEV;
+ if (pdata == NULL) {
+ dev_dbg(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
if (chip == NULL)
int status;
pdata = client->dev.platform_data;
- if (!pdata)
- return -ENODEV;
+ if (!pdata) {
+ dev_dbg(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
/* Allocate, initialize, and register this gpio_chip. */
gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
else
status = i2c_read_le16(client);
- } else
- status = -ENODEV;
+ } else {
+ dev_dbg(&client->dev, "unsupported number of gpios\n");
+ status = -EINVAL;
+ }
if (status < 0)
goto fail;
/*
* Detailed mode info for 800x600@60Hz
*/
-static struct drm_display_mode std_mode[] = {
+static struct drm_display_mode std_modes[] = {
{ DRM_MODE("800x600", DRM_MODE_TYPE_DEFAULT, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
* changes have occurred.
*
* FIXME: take into account monitor limits
+ *
+ * RETURNS:
+ * Number of modes found on @connector.
*/
-void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
- uint32_t maxX, uint32_t maxY)
+int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+ uint32_t maxX, uint32_t maxY)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode, *t;
struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
- int ret;
+ int count = 0;
DRM_DEBUG("%s\n", drm_get_connector_name(connector));
/* set all modes to the unverified state */
DRM_DEBUG("%s is disconnected\n",
drm_get_connector_name(connector));
/* TODO set EDID to NULL */
- return;
+ return 0;
}
- ret = (*connector_funcs->get_modes)(connector);
+ count = (*connector_funcs->get_modes)(connector);
+ if (!count)
+ return 0;
- if (ret) {
- drm_mode_connector_list_update(connector);
- }
+ drm_mode_connector_list_update(connector);
if (maxX && maxY)
drm_mode_validate_size(dev, &connector->modes, maxX,
drm_mode_prune_invalid(dev, &connector->modes, true);
- if (list_empty(&connector->modes)) {
- struct drm_display_mode *stdmode;
-
- DRM_DEBUG("No valid modes on %s\n",
- drm_get_connector_name(connector));
-
- /* Should we do this here ???
- * When no valid EDID modes are available we end up
- * here and bailed in the past, now we add a standard
- * 640x480@60Hz mode and carry on.
- */
- stdmode = drm_mode_duplicate(dev, &std_mode[0]);
- drm_mode_probed_add(connector, stdmode);
- drm_mode_list_concat(&connector->probed_modes,
- &connector->modes);
-
- DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
- drm_get_connector_name(connector));
- }
+ if (list_empty(&connector->modes))
+ return 0;
drm_mode_sort(&connector->modes);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
drm_mode_debug_printmodeline(mode);
}
+
+ return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
-void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
+int drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
uint32_t maxY)
{
struct drm_connector *connector;
+ int count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+ count += drm_helper_probe_single_connector_modes(connector,
+ maxX, maxY);
}
+
+ return count;
}
EXPORT_SYMBOL(drm_helper_probe_connector_modes);
+static void drm_helper_add_std_modes(struct drm_device *dev,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode, *t;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(std_modes); i++) {
+ struct drm_display_mode *stdmode;
+
+ /*
+ * When no valid EDID modes are available we end up
+ * here and bailed in the past, now we add some standard
+ * modes and move on.
+ */
+ stdmode = drm_mode_duplicate(dev, &std_modes[i]);
+ drm_mode_probed_add(connector, stdmode);
+ drm_mode_list_concat(&connector->probed_modes,
+ &connector->modes);
+
+ DRM_DEBUG("Adding mode %s to %s\n", stdmode->name,
+ drm_get_connector_name(connector));
+ }
+ drm_mode_sort(&connector->modes);
+
+ DRM_DEBUG("Added std modes on %s\n", drm_get_connector_name(connector));
+ list_for_each_entry_safe(mode, t, &connector->modes, head) {
+ mode->vrefresh = drm_mode_vrefresh(mode);
+
+ drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+ drm_mode_debug_printmodeline(mode);
+ }
+}
/**
* drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
enabled[i] = drm_connector_enabled(connector, true);
+ DRM_DEBUG("connector %d enabled? %s\n", connector->base.id,
+ enabled[i] ? "yes" : "no");
any_enabled |= enabled[i];
i++;
}
continue;
}
+ DRM_DEBUG("looking for preferred mode on connector %d\n",
+ connector->base.id);
+
modes[i] = drm_has_preferred_mode(connector, width, height);
- if (!modes[i]) {
+ /* No preferred modes, pick one off the list */
+ if (!modes[i] && !list_empty(&connector->modes)) {
list_for_each_entry(modes[i], &connector->modes, head)
break;
}
+ DRM_DEBUG("found mode %s\n", modes[i] ? modes[i]->name :
+ "none");
i++;
}
return true;
int width, height;
int i, ret;
+ DRM_DEBUG("\n");
+
width = dev->mode_config.max_width;
height = dev->mode_config.max_height;
if (!ret)
DRM_ERROR("Unable to find initial modes\n");
+ DRM_DEBUG("picking CRTCs for %dx%d config\n", width, height);
+
drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
i = 0;
}
if (mode && crtc) {
+ DRM_DEBUG("desired mode %s set on crtc %d\n",
+ mode->name, crtc->base.id);
crtc->desired_mode = mode;
connector->encoder->crtc = crtc;
} else
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
+ bool depth_changed, bpp_changed;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!crtc->enabled)
return true;
+ if (old_fb && crtc->fb) {
+ depth_changed = (old_fb->depth != crtc->fb->depth);
+ bpp_changed = (old_fb->bits_per_pixel !=
+ crtc->fb->bits_per_pixel);
+ } else {
+ depth_changed = true;
+ bpp_changed = true;
+ }
+
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
crtc->y = y;
if (drm_mode_equal(&saved_mode, &crtc->mode)) {
- if (saved_x != crtc->x || saved_y != crtc->y) {
+ if (saved_x != crtc->x || saved_y != crtc->y ||
+ depth_changed || bpp_changed) {
crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
old_fb);
goto done;
struct drm_encoder **save_encoders, *new_encoder;
struct drm_framebuffer *old_fb;
bool save_enabled;
- bool changed = false;
- bool flip_or_move = false;
+ bool mode_changed = false;
+ bool fb_changed = false;
struct drm_connector *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
/* save previous config */
save_enabled = set->crtc->enabled;
- /* this is meant to be num_connector not num_crtc */
+ /*
+ * We do mode_config.num_connectors here since we'll look at the
+ * CRTC and encoder associated with each connector later.
+ */
save_crtcs = kzalloc(dev->mode_config.num_connector *
sizeof(struct drm_crtc *), GFP_KERNEL);
if (!save_crtcs)
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
- /* if we have no fb then its a change not a flip */
+ /* If we have no fb then treat it as a full mode set */
if (set->crtc->fb == NULL)
- changed = true;
+ mode_changed = true;
+ else if ((set->fb->bits_per_pixel !=
+ set->crtc->fb->bits_per_pixel) ||
+ set->fb->depth != set->crtc->fb->depth)
+ fb_changed = true;
else
- flip_or_move = true;
+ fb_changed = true;
}
if (set->x != set->crtc->x || set->y != set->crtc->y)
- flip_or_move = true;
+ fb_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
DRM_DEBUG("modes are different\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
- changed = true;
+ mode_changed = true;
}
/* a) traverse passed in connector list and get encoders for them */
}
if (new_encoder != connector->encoder) {
- changed = true;
+ mode_changed = true;
connector->encoder = new_encoder;
}
}
new_crtc = set->crtc;
}
if (new_crtc != connector->encoder->crtc) {
- changed = true;
+ mode_changed = true;
connector->encoder->crtc = new_crtc;
}
}
/* mode_set_base is not a required function */
- if (flip_or_move && !crtc_funcs->mode_set_base)
- changed = true;
+ if (fb_changed && !crtc_funcs->mode_set_base)
+ mode_changed = true;
- if (changed) {
+ if (mode_changed) {
old_fb = set->crtc->fb;
set->crtc->fb = set->fb;
set->crtc->enabled = (set->mode != NULL);
set->crtc->desired_mode = set->mode;
}
drm_helper_disable_unused_functions(dev);
- } else if (flip_or_move) {
+ } else if (fb_changed) {
old_fb = set->crtc->fb;
if (set->crtc->fb != set->fb)
set->crtc->fb = set->fb;
*/
bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
{
- int ret = false;
+ struct drm_connector *connector;
+ int count = 0;
- drm_helper_plugged_event(dev);
- return ret;
+ count = drm_helper_probe_connector_modes(dev,
+ dev->mode_config.max_width,
+ dev->mode_config.max_height);
+
+ /*
+ * None of the available connectors had any modes, so add some
+ * and try to light them up anyway
+ */
+ if (!count) {
+ DRM_ERROR("connectors have no modes, using standard modes\n");
+ list_for_each_entry(connector,
+ &dev->mode_config.connector_list,
+ head)
+ drm_helper_add_std_modes(dev, connector);
+ }
+
+ drm_setup_crtcs(dev);
+
+ /* alert the driver fb layer */
+ dev->mode_config.funcs->fb_changed(dev);
+
+ return 0;
}
EXPORT_SYMBOL(drm_helper_initial_config);
*/
int drm_irq_uninstall(struct drm_device * dev)
{
- int irq_enabled;
+ unsigned long irqflags;
+ int irq_enabled, i;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
dev->irq_enabled = 0;
mutex_unlock(&dev->struct_mutex);
+ /*
+ * Wake up any waiters so they don't hang.
+ */
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for (i = 0; i < dev->num_crtcs; i++) {
+ DRM_WAKEUP(&dev->vbl_queue[i]);
+ dev->vblank_enabled[i] = 0;
+ }
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+
if (!irq_enabled)
return -EINVAL;
vblwait->request.sequence, crtc);
dev->last_vblank_wait[crtc] = vblwait->request.sequence;
DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
- ((drm_vblank_count(dev, crtc)
- - vblwait->request.sequence) <= (1 << 23)));
+ (((drm_vblank_count(dev, crtc) -
+ vblwait->request.sequence) <= (1 << 23)) ||
+ !dev->irq_enabled));
if (ret != -EINTR) {
struct timeval now;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
+ master_priv->sarea = drm_getsarea(dev);
+ if (master_priv->sarea) {
+ master_priv->sarea_priv = (drm_i915_sarea_t *)
+ ((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
+ } else {
+ DRM_DEBUG("sarea not found assuming DRI2 userspace\n");
+ }
+
if (init->ring_size != 0) {
if (dev_priv->ring.ring_obj != NULL) {
i915_dma_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
+ i915_gem_free_all_phys_object(dev);
+
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
#define WATCH_INACTIVE 0
#define WATCH_PWRITE 0
+#define I915_GEM_PHYS_CURSOR_0 1
+#define I915_GEM_PHYS_CURSOR_1 2
+#define I915_GEM_PHYS_OVERLAY_REGS 3
+#define I915_MAX_PHYS_OBJECT (I915_GEM_PHYS_OVERLAY_REGS)
+
+struct drm_i915_gem_phys_object {
+ int id;
+ struct page **page_list;
+ drm_dma_handle_t *handle;
+ struct drm_gem_object *cur_obj;
+};
+
typedef struct _drm_i915_ring_buffer {
int tail_mask;
unsigned long Size;
uint32_t bit_6_swizzle_x;
/** Bit 6 swizzling required for Y tiling */
uint32_t bit_6_swizzle_y;
+
+ /* storage for physical objects */
+ struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
} mm;
} drm_i915_private_t;
/** User space pin count and filp owning the pin */
uint32_t user_pin_count;
struct drm_file *pin_filp;
+
+ /** for phy allocated objects */
+ struct drm_i915_gem_phys_object *phys_obj;
};
/**
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
+int i915_gem_attach_phys_object(struct drm_device *dev,
+ struct drm_gem_object *obj, int id);
+void i915_gem_detach_phys_object(struct drm_device *dev,
+ struct drm_gem_object *obj);
+void i915_gem_free_all_phys_object(struct drm_device *dev);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
static int i915_gem_evict_something(struct drm_device *dev);
+static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+ struct drm_i915_gem_pwrite *args,
+ struct drm_file *file_priv);
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end)
* pread/pwrite currently are reading and writing from the CPU
* perspective, requiring manual detiling by the client.
*/
- if (obj_priv->tiling_mode == I915_TILING_NONE &&
- dev->gtt_total != 0)
+ if (obj_priv->phys_obj)
+ ret = i915_gem_phys_pwrite(dev, obj, args, file_priv);
+ else if (obj_priv->tiling_mode == I915_TILING_NONE &&
+ dev->gtt_total != 0)
ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv);
else
ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv);
while (obj_priv->pin_count > 0)
i915_gem_object_unpin(obj);
+ if (obj_priv->phys_obj)
+ i915_gem_detach_phys_object(dev, obj);
+
i915_gem_object_unbind(obj);
list = &obj->map_list;
i915_gem_detect_bit_6_swizzle(dev);
}
+
+/*
+ * Create a physically contiguous memory object for this object
+ * e.g. for cursor + overlay regs
+ */
+int i915_gem_init_phys_object(struct drm_device *dev,
+ int id, int size)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_phys_object *phys_obj;
+ int ret;
+
+ if (dev_priv->mm.phys_objs[id - 1] || !size)
+ return 0;
+
+ phys_obj = drm_calloc(1, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+ if (!phys_obj)
+ return -ENOMEM;
+
+ phys_obj->id = id;
+
+ phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff);
+ if (!phys_obj->handle) {
+ ret = -ENOMEM;
+ goto kfree_obj;
+ }
+#ifdef CONFIG_X86
+ set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+
+ dev_priv->mm.phys_objs[id - 1] = phys_obj;
+
+ return 0;
+kfree_obj:
+ drm_free(phys_obj, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+ return ret;
+}
+
+void i915_gem_free_phys_object(struct drm_device *dev, int id)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_phys_object *phys_obj;
+
+ if (!dev_priv->mm.phys_objs[id - 1])
+ return;
+
+ phys_obj = dev_priv->mm.phys_objs[id - 1];
+ if (phys_obj->cur_obj) {
+ i915_gem_detach_phys_object(dev, phys_obj->cur_obj);
+ }
+
+#ifdef CONFIG_X86
+ set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+ drm_pci_free(dev, phys_obj->handle);
+ kfree(phys_obj);
+ dev_priv->mm.phys_objs[id - 1] = NULL;
+}
+
+void i915_gem_free_all_phys_object(struct drm_device *dev)
+{
+ int i;
+
+ for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+ i915_gem_free_phys_object(dev, i);
+}
+
+void i915_gem_detach_phys_object(struct drm_device *dev,
+ struct drm_gem_object *obj)
+{
+ struct drm_i915_gem_object *obj_priv;
+ int i;
+ int ret;
+ int page_count;
+
+ obj_priv = obj->driver_private;
+ if (!obj_priv->phys_obj)
+ return;
+
+ ret = i915_gem_object_get_page_list(obj);
+ if (ret)
+ goto out;
+
+ page_count = obj->size / PAGE_SIZE;
+
+ for (i = 0; i < page_count; i++) {
+ char *dst = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+ char *src = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+ memcpy(dst, src, PAGE_SIZE);
+ kunmap_atomic(dst, KM_USER0);
+ }
+ drm_clflush_pages(obj_priv->page_list, page_count);
+ drm_agp_chipset_flush(dev);
+out:
+ obj_priv->phys_obj->cur_obj = NULL;
+ obj_priv->phys_obj = NULL;
+}
+
+int
+i915_gem_attach_phys_object(struct drm_device *dev,
+ struct drm_gem_object *obj, int id)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv;
+ int ret = 0;
+ int page_count;
+ int i;
+
+ if (id > I915_MAX_PHYS_OBJECT)
+ return -EINVAL;
+
+ obj_priv = obj->driver_private;
+
+ if (obj_priv->phys_obj) {
+ if (obj_priv->phys_obj->id == id)
+ return 0;
+ i915_gem_detach_phys_object(dev, obj);
+ }
+
+
+ /* create a new object */
+ if (!dev_priv->mm.phys_objs[id - 1]) {
+ ret = i915_gem_init_phys_object(dev, id,
+ obj->size);
+ if (ret) {
+ DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+ goto out;
+ }
+ }
+
+ /* bind to the object */
+ obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
+ obj_priv->phys_obj->cur_obj = obj;
+
+ ret = i915_gem_object_get_page_list(obj);
+ if (ret) {
+ DRM_ERROR("failed to get page list\n");
+ goto out;
+ }
+
+ page_count = obj->size / PAGE_SIZE;
+
+ for (i = 0; i < page_count; i++) {
+ char *src = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+ char *dst = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+ memcpy(dst, src, PAGE_SIZE);
+ kunmap_atomic(src, KM_USER0);
+ }
+
+ return 0;
+out:
+ return ret;
+}
+
+static int
+i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+ struct drm_i915_gem_pwrite *args,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ void *obj_addr;
+ int ret;
+ char __user *user_data;
+
+ user_data = (char __user *) (uintptr_t) args->data_ptr;
+ obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+
+ DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+ ret = copy_from_user(obj_addr, user_data, args->size);
+ if (ret)
+ return -EFAULT;
+
+ drm_agp_chipset_flush(dev);
+ return 0;
+}
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ u32 pipeconf;
+
+ pipeconf = I915_READ(pipeconf_reg);
+ if (!(pipeconf & PIPEACONF_ENABLE))
+ return -EINVAL;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (IS_I965G(dev))
I915_WRITE(dspstride, crtc->fb->pitch);
dspcntr = I915_READ(dspcntr_reg);
+ /* Mask out pixel format bits in case we change it */
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
switch (crtc->fb->bits_per_pixel) {
case 8:
dspcntr |= DISPPLANE_8BPP;
if (bo->size < width * height * 4) {
DRM_ERROR("buffer is to small\n");
- drm_gem_object_unreference(bo);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail;
}
- if (dev_priv->cursor_needs_physical) {
- addr = dev->agp->base + obj_priv->gtt_offset;
- } else {
+ /* we only need to pin inside GTT if cursor is non-phy */
+ if (!dev_priv->cursor_needs_physical) {
+ ret = i915_gem_object_pin(bo, PAGE_SIZE);
+ if (ret) {
+ DRM_ERROR("failed to pin cursor bo\n");
+ goto fail;
+ }
addr = obj_priv->gtt_offset;
- }
-
- ret = i915_gem_object_pin(bo, PAGE_SIZE);
- if (ret) {
- DRM_ERROR("failed to pin cursor bo\n");
- drm_gem_object_unreference(bo);
- return ret;
+ } else {
+ ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+ if (ret) {
+ DRM_ERROR("failed to attach phys object\n");
+ goto fail;
+ }
+ addr = obj_priv->phys_obj->handle->busaddr;
}
temp = 0;
I915_WRITE(base, addr);
if (intel_crtc->cursor_bo) {
- i915_gem_object_unpin(intel_crtc->cursor_bo);
+ if (dev_priv->cursor_needs_physical) {
+ if (intel_crtc->cursor_bo != bo)
+ i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+ } else
+ i915_gem_object_unpin(intel_crtc->cursor_bo);
+ mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(intel_crtc->cursor_bo);
+ mutex_unlock(&dev->struct_mutex);
}
intel_crtc->cursor_addr = addr;
intel_crtc->cursor_bo = bo;
return 0;
+fail:
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(bo);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
}
static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, dev_priv->vbt_mode);
mutex_unlock(&dev->mode_config.mutex);
+ if (dev_priv->panel_fixed_mode) {
+ dev_priv->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(connector,
+ dev_priv->panel_fixed_mode);
+ goto out;
+ }
}
/*
This driver can also be built as a module. If so, the module
will be called adt7473.
+config SENSORS_ADT7475
+ tristate "Analog Devices ADT7475"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Analog Devices
+ ADT7475 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called adt7475.
+
config SENSORS_K8TEMP
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
config SENSORS_LIS3LV02D
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
depends on ACPI && INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
default n
help
This driver provides support for the LIS3LV02Dx accelerometer. In
/sys/devices/platform/lis3lv02d.
This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick.
+ the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ if the led infrastructure is activated, support for a led indicating
+ disk protection will be provided as hp:red:hddprotection.
- This driver can also be built as a module. If so, the module
- will be called lis3lv02d.
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for HP laptops will be
+ called hp_accel.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of lis3lv02d.
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
+obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
+
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
{ "OTES1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
+ { 0x0011, "AT8 32X", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0016, "AW9D-MAX (Intel i975-ICH7)", {
+ { 0x0016, "AW9D-MAX", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0019, NULL /* Unknown, need DMI string */, {
+ { 0x0019, "IN9 32X MAX", {
{ "CPU Core", 7, 0, 10, 1, 0 },
{ "DDR2", 13, 0, 20, 1, 0 },
{ "DDR2 VTT", 14, 0, 10, 1, 0 },
{ "AUX3 FAN", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
+ { 0x001A, "IP35 Pro", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{
const char *board_vendor, *board_name;
int i, err = (force) ? 1 : -ENODEV;
+ size_t sublen;
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
if (!board_name)
return err;
+ /* At the moment, we don't care about the part of the vendor
+ * DMI string contained in brackets. Truncate the string at
+ * the first occurrence of a bracket. Trim any trailing space
+ * from the substring.
+ */
+ sublen = strcspn(board_name, "(");
+ while (sublen > 0 && board_name[sublen - 1] == ' ')
+ sublen--;
+
for (i = 0; abituguru3_motherboards[i].id; i++) {
const char *dmi_name = abituguru3_motherboards[i].dmi_name;
- if (dmi_name && !strcmp(dmi_name, board_name))
+ if (!dmi_name || strlen(dmi_name) != sublen)
+ continue;
+ if (!strncasecmp(board_name, dmi_name, sublen))
break;
}
static inline int abituguru3_dmi_detect(void)
{
- return -ENODEV;
+ return 1;
}
#endif /* CONFIG_DMI */
--- /dev/null
+/*
+ * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
+ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
+ * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
+
+ * Derived from the lm83 driver by Jean Delvare
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+/* Indexes for the sysfs hooks */
+
+#define INPUT 0
+#define MIN 1
+#define MAX 2
+#define CONTROL 3
+#define OFFSET 3
+#define AUTOMIN 4
+#define THERM 5
+#define HYSTERSIS 6
+
+/* These are unique identifiers for the sysfs functions - unlike the
+ numbers above, these are not also indexes into an array
+*/
+
+#define ALARM 9
+#define FAULT 10
+
+/* 7475 Common Registers */
+
+#define REG_VOLTAGE_BASE 0x21
+#define REG_TEMP_BASE 0x25
+#define REG_TACH_BASE 0x28
+#define REG_PWM_BASE 0x30
+#define REG_PWM_MAX_BASE 0x38
+
+#define REG_DEVID 0x3D
+#define REG_VENDID 0x3E
+
+#define REG_STATUS1 0x41
+#define REG_STATUS2 0x42
+
+#define REG_VOLTAGE_MIN_BASE 0x46
+#define REG_VOLTAGE_MAX_BASE 0x47
+
+#define REG_TEMP_MIN_BASE 0x4E
+#define REG_TEMP_MAX_BASE 0x4F
+
+#define REG_TACH_MIN_BASE 0x54
+
+#define REG_PWM_CONFIG_BASE 0x5C
+
+#define REG_TEMP_TRANGE_BASE 0x5F
+
+#define REG_PWM_MIN_BASE 0x64
+
+#define REG_TEMP_TMIN_BASE 0x67
+#define REG_TEMP_THERM_BASE 0x6A
+
+#define REG_REMOTE1_HYSTERSIS 0x6D
+#define REG_REMOTE2_HYSTERSIS 0x6E
+
+#define REG_TEMP_OFFSET_BASE 0x70
+
+#define REG_EXTEND1 0x76
+#define REG_EXTEND2 0x77
+#define REG_CONFIG5 0x7C
+
+#define CONFIG5_TWOSCOMP 0x01
+#define CONFIG5_TEMPOFFSET 0x02
+
+/* ADT7475 Settings */
+
+#define ADT7475_VOLTAGE_COUNT 2
+#define ADT7475_TEMP_COUNT 3
+#define ADT7475_TACH_COUNT 4
+#define ADT7475_PWM_COUNT 3
+
+/* Macro to read the registers */
+
+#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
+
+/* Macros to easily index the registers */
+
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD_1(adt7475);
+
+static const struct i2c_device_id adt7475_id[] = {
+ { "adt7475", adt7475 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adt7475_id);
+
+struct adt7475_data {
+ struct device *hwmon_dev;
+ struct mutex lock;
+
+ unsigned long measure_updated;
+ unsigned long limits_updated;
+ char valid;
+
+ u8 config5;
+ u16 alarms;
+ u16 voltage[3][3];
+ u16 temp[7][3];
+ u16 tach[2][4];
+ u8 pwm[4][3];
+ u8 range[3];
+ u8 pwmctl[3];
+ u8 pwmchan[3];
+};
+
+static struct i2c_driver adt7475_driver;
+static struct adt7475_data *adt7475_update_device(struct device *dev);
+static void adt7475_read_hystersis(struct i2c_client *client);
+static void adt7475_read_pwm(struct i2c_client *client, int index);
+
+/* Given a temp value, convert it to register value */
+
+static inline u16 temp2reg(struct adt7475_data *data, long val)
+{
+ u16 ret;
+
+ if (!(data->config5 & CONFIG5_TWOSCOMP)) {
+ val = SENSORS_LIMIT(val, -64000, 191000);
+ ret = (val + 64500) / 1000;
+ } else {
+ val = SENSORS_LIMIT(val, -128000, 127000);
+ if (val < -500)
+ ret = (256500 + val) / 1000;
+ else
+ ret = (val + 500) / 1000;
+ }
+
+ return ret << 2;
+}
+
+/* Given a register value, convert it to a real temp value */
+
+static inline int reg2temp(struct adt7475_data *data, u16 reg)
+{
+ if (data->config5 & CONFIG5_TWOSCOMP) {
+ if (reg >= 512)
+ return (reg - 1024) * 250;
+ else
+ return reg * 250;
+ } else
+ return (reg - 256) * 250;
+}
+
+static inline int tach2rpm(u16 tach)
+{
+ if (tach == 0 || tach == 0xFFFF)
+ return 0;
+
+ return (90000 * 60) / tach;
+}
+
+static inline u16 rpm2tach(unsigned long rpm)
+{
+ if (rpm == 0)
+ return 0;
+
+ return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
+}
+
+static inline int reg2vcc(u16 reg)
+{
+ return (4296 * reg) / 1000;
+}
+
+static inline int reg2vccp(u16 reg)
+{
+ return (2929 * reg) / 1000;
+}
+
+static inline u16 vcc2reg(long vcc)
+{
+ vcc = SENSORS_LIMIT(vcc, 0, 4396);
+ return (vcc * 1000) / 4296;
+}
+
+static inline u16 vccp2reg(long vcc)
+{
+ vcc = SENSORS_LIMIT(vcc, 0, 2998);
+ return (vcc * 1000) / 2929;
+}
+
+static u16 adt7475_read_word(struct i2c_client *client, int reg)
+{
+ u16 val;
+
+ val = i2c_smbus_read_byte_data(client, reg);
+ val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+
+ return val;
+}
+
+static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
+{
+ i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+ i2c_smbus_write_byte_data(client, reg, val & 0xFF);
+}
+
+/* Find the nearest value in a table - used for pwm frequency and
+ auto temp range */
+static int find_nearest(long val, const int *array, int size)
+{
+ int i;
+
+ if (val < array[0])
+ return 0;
+
+ if (val > array[size - 1])
+ return size - 1;
+
+ for (i = 0; i < size - 1; i++) {
+ int a, b;
+
+ if (val > array[i + 1])
+ continue;
+
+ a = val - array[i];
+ b = array[i + 1] - val;
+
+ return (a <= b) ? i : i + 1;
+ }
+
+ return 0;
+}
+
+static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ unsigned short val;
+
+ switch (sattr->nr) {
+ case ALARM:
+ return sprintf(buf, "%d\n",
+ (data->alarms >> (sattr->index + 1)) & 1);
+ default:
+ val = data->voltage[sattr->nr][sattr->index];
+ return sprintf(buf, "%d\n",
+ sattr->index ==
+ 0 ? reg2vccp(val) : reg2vcc(val));
+ }
+}
+
+static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned char reg;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->voltage[sattr->nr][sattr->index] =
+ sattr->index ? vcc2reg(val) : vccp2reg(val);
+
+ if (sattr->nr == MIN)
+ reg = VOLTAGE_MIN_REG(sattr->index);
+ else
+ reg = VOLTAGE_MAX_REG(sattr->index);
+
+ i2c_smbus_write_byte_data(client, reg,
+ data->voltage[sattr->nr][sattr->index] >> 2);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out;
+
+ switch (sattr->nr) {
+ case HYSTERSIS:
+ mutex_lock(&data->lock);
+ out = data->temp[sattr->nr][sattr->index];
+ if (sattr->index != 1)
+ out = (out >> 4) & 0xF;
+ else
+ out = (out & 0xF);
+ /* Show the value as an absolute number tied to
+ * THERM */
+ out = reg2temp(data, data->temp[THERM][sattr->index]) -
+ out * 1000;
+ mutex_unlock(&data->lock);
+ break;
+
+ case OFFSET:
+ /* Offset is always 2's complement, regardless of the
+ * setting in CONFIG5 */
+ mutex_lock(&data->lock);
+ out = (s8)data->temp[sattr->nr][sattr->index];
+ if (data->config5 & CONFIG5_TEMPOFFSET)
+ out *= 1000;
+ else
+ out *= 500;
+ mutex_unlock(&data->lock);
+ break;
+
+ case ALARM:
+ out = (data->alarms >> (sattr->index + 4)) & 1;
+ break;
+
+ case FAULT:
+ /* Note - only for remote1 and remote2 */
+ out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
+ out = out ? 0 : 1;
+ break;
+
+ default:
+ /* All other temp values are in the configured format */
+ out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
+ }
+
+ return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned char reg = 0;
+ u8 out;
+ int temp;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ /* We need the config register in all cases for temp <-> reg conv. */
+ data->config5 = adt7475_read(REG_CONFIG5);
+
+ switch (sattr->nr) {
+ case OFFSET:
+ if (data->config5 & CONFIG5_TEMPOFFSET) {
+ val = SENSORS_LIMIT(val, -63000, 127000);
+ out = data->temp[OFFSET][sattr->index] = val / 1000;
+ } else {
+ val = SENSORS_LIMIT(val, -63000, 64000);
+ out = data->temp[OFFSET][sattr->index] = val / 500;
+ }
+ break;
+
+ case HYSTERSIS:
+ /* The value will be given as an absolute value, turn it
+ into an offset based on THERM */
+
+ /* Read fresh THERM and HYSTERSIS values from the chip */
+ data->temp[THERM][sattr->index] =
+ adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
+ adt7475_read_hystersis(client);
+
+ temp = reg2temp(data, data->temp[THERM][sattr->index]);
+ val = SENSORS_LIMIT(val, temp - 15000, temp);
+ val = (temp - val) / 1000;
+
+ if (sattr->index != 1) {
+ data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+ data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
+ } else {
+ data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+ data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
+ }
+
+ out = data->temp[HYSTERSIS][sattr->index];
+ break;
+
+ default:
+ data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
+
+ /* We maintain an extra 2 digits of precision for simplicity
+ * - shift those back off before writing the value */
+ out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
+ }
+
+ switch (sattr->nr) {
+ case MIN:
+ reg = TEMP_MIN_REG(sattr->index);
+ break;
+ case MAX:
+ reg = TEMP_MAX_REG(sattr->index);
+ break;
+ case OFFSET:
+ reg = TEMP_OFFSET_REG(sattr->index);
+ break;
+ case AUTOMIN:
+ reg = TEMP_TMIN_REG(sattr->index);
+ break;
+ case THERM:
+ reg = TEMP_THERM_REG(sattr->index);
+ break;
+ case HYSTERSIS:
+ if (sattr->index != 2)
+ reg = REG_REMOTE1_HYSTERSIS;
+ else
+ reg = REG_REMOTE2_HYSTERSIS;
+
+ break;
+ }
+
+ i2c_smbus_write_byte_data(client, reg, out);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+/* Table of autorange values - the user will write the value in millidegrees,
+ and we'll convert it */
+static const int autorange_table[] = {
+ 2000, 2500, 3330, 4000, 5000, 6670, 8000,
+ 10000, 13330, 16000, 20000, 26670, 32000, 40000,
+ 53330, 80000
+};
+
+static ssize_t show_point2(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out, val;
+
+ mutex_lock(&data->lock);
+ out = (data->range[sattr->index] >> 4) & 0x0F;
+ val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+ mutex_unlock(&data->lock);
+
+ return sprintf(buf, "%d\n", val + autorange_table[out]);
+}
+
+static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int temp;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ /* Get a fresh copy of the needed registers */
+ data->config5 = adt7475_read(REG_CONFIG5);
+ data->temp[AUTOMIN][sattr->index] =
+ adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
+ data->range[sattr->index] =
+ adt7475_read(TEMP_TRANGE_REG(sattr->index));
+
+ /* The user will write an absolute value, so subtract the start point
+ to figure the range */
+ temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+ val = SENSORS_LIMIT(val, temp + autorange_table[0],
+ temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
+ val -= temp;
+
+ /* Find the nearest table entry to what the user wrote */
+ val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
+
+ data->range[sattr->index] &= ~0xF0;
+ data->range[sattr->index] |= val << 4;
+
+ i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+ data->range[sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static ssize_t show_tach(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int out;
+
+ if (sattr->nr == ALARM)
+ out = (data->alarms >> (sattr->index + 10)) & 1;
+ else
+ out = tach2rpm(data->tach[sattr->nr][sattr->index]);
+
+ return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_tach(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ data->tach[MIN][sattr->index] = rpm2tach(val);
+
+ adt7475_write_word(client, TACH_MIN_REG(sattr->index),
+ data->tach[MIN][sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
+}
+
+static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned char reg = 0;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ switch (sattr->nr) {
+ case INPUT:
+ /* Get a fresh value for CONTROL */
+ data->pwm[CONTROL][sattr->index] =
+ adt7475_read(PWM_CONFIG_REG(sattr->index));
+
+ /* If we are not in manual mode, then we shouldn't allow
+ * the user to set the pwm speed */
+ if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
+ mutex_unlock(&data->lock);
+ return count;
+ }
+
+ reg = PWM_REG(sattr->index);
+ break;
+
+ case MIN:
+ reg = PWM_MIN_REG(sattr->index);
+ break;
+
+ case MAX:
+ reg = PWM_MAX_REG(sattr->index);
+ break;
+ }
+
+ data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
+ i2c_smbus_write_byte_data(client, reg,
+ data->pwm[sattr->nr][sattr->index]);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/* Called by set_pwmctrl and set_pwmchan */
+
+static int hw_set_pwm(struct i2c_client *client, int index,
+ unsigned int pwmctl, unsigned int pwmchan)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ long val = 0;
+
+ switch (pwmctl) {
+ case 0:
+ val = 0x03; /* Run at full speed */
+ break;
+ case 1:
+ val = 0x07; /* Manual mode */
+ break;
+ case 2:
+ switch (pwmchan) {
+ case 1:
+ /* Remote1 controls PWM */
+ val = 0x00;
+ break;
+ case 2:
+ /* local controls PWM */
+ val = 0x01;
+ break;
+ case 4:
+ /* remote2 controls PWM */
+ val = 0x02;
+ break;
+ case 6:
+ /* local/remote2 control PWM */
+ val = 0x05;
+ break;
+ case 7:
+ /* All three control PWM */
+ val = 0x06;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ data->pwmctl[index] = pwmctl;
+ data->pwmchan[index] = pwmchan;
+
+ data->pwm[CONTROL][index] &= ~0xE0;
+ data->pwm[CONTROL][index] |= (val & 7) << 5;
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[CONTROL][index]);
+
+ return 0;
+}
+
+static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ int r;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ /* Read Modify Write PWM values */
+ adt7475_read_pwm(client, sattr->index);
+ r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
+ if (r)
+ count = r;
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ int r;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ /* Read Modify Write PWM values */
+ adt7475_read_pwm(client, sattr->index);
+ r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
+ if (r)
+ count = r;
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+/* List of frequencies for the PWM */
+static const int pwmfreq_table[] = {
+ 11, 14, 22, 29, 35, 44, 58, 88
+};
+
+static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+ return sprintf(buf, "%d\n",
+ pwmfreq_table[data->range[sattr->index] & 7]);
+}
+
+static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ int out;
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+
+ mutex_lock(&data->lock);
+
+ data->range[sattr->index] =
+ adt7475_read(TEMP_TRANGE_REG(sattr->index));
+ data->range[sattr->index] &= ~7;
+ data->range[sattr->index] |= out;
+
+ i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+ data->range[sattr->index]);
+
+ mutex_unlock(&data->lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MAX, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, OFFSET, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_temp, set_temp, AUTOMIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_point2, set_point2, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ THERM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MAX, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, OFFSET, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_temp, set_temp, AUTOMIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_point2, set_point2, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ THERM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MAX, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ MIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, OFFSET, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_temp, set_temp, AUTOMIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_point2, set_point2, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ THERM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+ MIN, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+ MIN, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+ MIN, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+ MIN, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+ 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+ set_pwmfreq, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+ set_pwmctrl, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+ show_pwmchan, set_pwmchan, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+ 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+ set_pwmfreq, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+ set_pwmctrl, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+ show_pwmchan, set_pwmchan, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+ 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+ set_pwmfreq, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+ set_pwmctrl, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+ show_pwmchan, set_pwmchan, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+ set_pwm, MAX, 2);
+
+static struct attribute *adt7475_attrs[] = {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_offset.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ NULL,
+};
+
+struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+
+static int adt7475_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ if (kind <= 0) {
+ if (adt7475_read(REG_VENDID) != 0x41 ||
+ adt7475_read(REG_DEVID) != 0x75) {
+ dev_err(&adapter->dev,
+ "Couldn't detect a adt7475 part at 0x%02x\n",
+ (unsigned int)client->addr);
+ return -ENODEV;
+ }
+ }
+
+ strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int adt7475_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adt7475_data *data;
+ int i, ret = 0;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ mutex_init(&data->lock);
+ i2c_set_clientdata(client, data);
+
+ /* Call adt7475_read_pwm for all pwm's as this will reprogram any
+ pwm's which are disabled to manual mode with 0% duty cycle */
+ for (i = 0; i < ADT7475_PWM_COUNT; i++)
+ adt7475_read_pwm(client, i);
+
+ ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
+ if (ret)
+ goto efree;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto eremove;
+ }
+
+ return 0;
+
+eremove:
+ sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+efree:
+ kfree(data);
+ return ret;
+}
+
+static int adt7475_remove(struct i2c_client *client)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ kfree(data);
+
+ return 0;
+}
+
+static struct i2c_driver adt7475_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "adt7475",
+ },
+ .probe = adt7475_probe,
+ .remove = adt7475_remove,
+ .id_table = adt7475_id,
+ .detect = adt7475_detect,
+ .address_data = &addr_data,
+};
+
+static void adt7475_read_hystersis(struct i2c_client *client)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+
+ data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
+ data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
+ data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
+}
+
+static void adt7475_read_pwm(struct i2c_client *client, int index)
+{
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ unsigned int v;
+
+ data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
+
+ /* Figure out the internal value for pwmctrl and pwmchan
+ based on the current settings */
+ v = (data->pwm[CONTROL][index] >> 5) & 7;
+
+ if (v == 3)
+ data->pwmctl[index] = 0;
+ else if (v == 7)
+ data->pwmctl[index] = 1;
+ else if (v == 4) {
+ /* The fan is disabled - we don't want to
+ support that, so change to manual mode and
+ set the duty cycle to 0 instead
+ */
+ data->pwm[INPUT][index] = 0;
+ data->pwm[CONTROL][index] &= ~0xE0;
+ data->pwm[CONTROL][index] |= (7 << 5);
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[INPUT][index]);
+
+ i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+ data->pwm[CONTROL][index]);
+
+ data->pwmctl[index] = 1;
+ } else {
+ data->pwmctl[index] = 2;
+
+ switch (v) {
+ case 0:
+ data->pwmchan[index] = 1;
+ break;
+ case 1:
+ data->pwmchan[index] = 2;
+ break;
+ case 2:
+ data->pwmchan[index] = 4;
+ break;
+ case 5:
+ data->pwmchan[index] = 6;
+ break;
+ case 6:
+ data->pwmchan[index] = 7;
+ break;
+ }
+ }
+}
+
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ u8 ext;
+ int i;
+
+ mutex_lock(&data->lock);
+
+ /* Measurement values update every 2 seconds */
+ if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+ !data->valid) {
+ data->alarms = adt7475_read(REG_STATUS2) << 8;
+ data->alarms |= adt7475_read(REG_STATUS1);
+
+ ext = adt7475_read(REG_EXTEND1);
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+ data->voltage[INPUT][i] =
+ (adt7475_read(VOLTAGE_REG(i)) << 2) |
+ ((ext >> ((i + 1) * 2)) & 3);
+
+ ext = adt7475_read(REG_EXTEND2);
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++)
+ data->temp[INPUT][i] =
+ (adt7475_read(TEMP_REG(i)) << 2) |
+ ((ext >> ((i + 1) * 2)) & 3);
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ data->tach[INPUT][i] =
+ adt7475_read_word(client, TACH_REG(i));
+
+ /* Updated by hw when in auto mode */
+ for (i = 0; i < ADT7475_PWM_COUNT; i++)
+ data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+
+ data->measure_updated = jiffies;
+ }
+
+ /* Limits and settings, should never change update every 60 seconds */
+ if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+ !data->valid) {
+ data->config5 = adt7475_read(REG_CONFIG5);
+
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ /* Adjust values so they match the input precision */
+ data->voltage[MIN][i] =
+ adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
+ data->voltage[MAX][i] =
+ adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
+ }
+
+ for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+ /* Adjust values so they match the input precision */
+ data->temp[MIN][i] =
+ adt7475_read(TEMP_MIN_REG(i)) << 2;
+ data->temp[MAX][i] =
+ adt7475_read(TEMP_MAX_REG(i)) << 2;
+ data->temp[AUTOMIN][i] =
+ adt7475_read(TEMP_TMIN_REG(i)) << 2;
+ data->temp[THERM][i] =
+ adt7475_read(TEMP_THERM_REG(i)) << 2;
+ data->temp[OFFSET][i] =
+ adt7475_read(TEMP_OFFSET_REG(i));
+ }
+ adt7475_read_hystersis(client);
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ data->tach[MIN][i] =
+ adt7475_read_word(client, TACH_MIN_REG(i));
+
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
+ data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
+ /* Set the channel and control information */
+ adt7475_read_pwm(client, i);
+ }
+
+ data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
+ data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
+ data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+
+ data->limits_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return data;
+}
+
+static int __init sensors_adt7475_init(void)
+{
+ return i2c_add_driver(&adt7475_driver);
+}
+
+static void __exit sensors_adt7475_exit(void)
+{
+ i2c_del_driver(&adt7475_driver);
+}
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("adt7475 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adt7475_init);
+module_exit(sensors_adt7475_exit);
}
ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
+ /* newer macbooks report a single 10-bit bigendian value */
+ if (data_length == 10) {
+ left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
+ goto out;
+ }
left = buffer[2];
if (ret)
goto out;
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
- * Copyright (C) 2008 Pavel Machek
+ * Copyright (C) 2008-2009 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/freezer.h>
#include <linux/version.h>
#include <linux/uaccess.h>
+#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
#define DRIVER_NAME "lis3lv02d"
#define ACPI_MDPS_CLASS "accelerometer"
+/* Delayed LEDs infrastructure ------------------------------------ */
+
+/* Special LED class that can defer work */
+struct delayed_led_classdev {
+ struct led_classdev led_classdev;
+ struct work_struct work;
+ enum led_brightness new_brightness;
+
+ unsigned int led; /* For driver */
+ void (*set_brightness)(struct delayed_led_classdev *data, enum led_brightness value);
+};
+
+static inline void delayed_set_status_worker(struct work_struct *work)
+{
+ struct delayed_led_classdev *data =
+ container_of(work, struct delayed_led_classdev, work);
+
+ data->set_brightness(data, data->new_brightness);
+}
+
+static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct delayed_led_classdev *data = container_of(led_cdev,
+ struct delayed_led_classdev, led_classdev);
+ data->new_brightness = brightness;
+ schedule_work(&data->work);
+}
+
+/* HP-specific accelerometer driver ------------------------------------ */
/* For automatic insertion of the module */
static struct acpi_device_id lis3lv02d_device_ids[] = {
*/
};
+static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
+{
+ acpi_handle handle = adev.device->handle;
+ unsigned long long ret; /* Not used when writing */
+ union acpi_object in_obj[1];
+ struct acpi_object_list args = { 1, in_obj };
+
+ in_obj[0].type = ACPI_TYPE_INTEGER;
+ in_obj[0].integer.value = !!value;
+
+ acpi_evaluate_integer(handle, "ALED", &args, &ret);
+}
+
+static struct delayed_led_classdev hpled_led = {
+ .led_classdev = {
+ .name = "hp::hddprotect",
+ .default_trigger = "none",
+ .brightness_set = delayed_sysfs_set,
+ .flags = LED_CORE_SUSPENDRESUME,
+ },
+ .set_brightness = hpled_set,
+};
static int lis3lv02d_add(struct acpi_device *device)
{
u8 val;
+ int ret;
if (!device)
return -EINVAL;
adev.ac = lis3lv02d_axis_normal;
}
- return lis3lv02d_init_device(&adev);
+ INIT_WORK(&hpled_led.work, delayed_set_status_worker);
+ ret = led_classdev_register(NULL, &hpled_led.led_classdev);
+ if (ret)
+ return ret;
+
+ ret = lis3lv02d_init_device(&adev);
+ if (ret) {
+ flush_work(&hpled_led.work);
+ led_classdev_unregister(&hpled_led.led_classdev);
+ return ret;
+ }
+
+ return ret;
}
static int lis3lv02d_remove(struct acpi_device *device, int type)
lis3lv02d_joystick_disable();
lis3lv02d_poweroff(device->handle);
+ flush_work(&hpled_led.work);
+ led_classdev_unregister(&hpled_led.led_classdev);
+
return lis3lv02d_remove_fs();
}
acpi_bus_unregister_driver(&lis3lv02d_driver);
}
-MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS");
+MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.");
MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <asm/processor.h>
#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
#define REG_TEMP 0xe4
/* registers values */
u8 sensorsp; /* sensor presence bits - SEL_CORE & SEL_PLACE */
u32 temp[2][2]; /* core, place */
+ u8 swap_core_select; /* meaning of SEL_CORE is inverted */
+ u32 temp_offset;
};
static struct k8temp_data *k8temp_update_device(struct device *dev)
to_sensor_dev_attr_2(devattr);
int core = attr->nr;
int place = attr->index;
+ int temp;
struct k8temp_data *data = k8temp_update_device(dev);
- return sprintf(buf, "%d\n",
- TEMP_FROM_REG(data->temp[core][place]));
+ if (data->swap_core_select)
+ core = core ? 0 : 1;
+
+ temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+ return sprintf(buf, "%d\n", temp);
}
/* core, place */
int err;
u8 scfg;
u32 temp;
+ u8 model, stepping;
struct k8temp_data *data;
- u32 cpuid = cpuid_eax(1);
-
- /* this feature should be available since SH-C0 core */
- if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
- err = -ENODEV;
- goto exit;
- }
if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
+ model = boot_cpu_data.x86_model;
+ stepping = boot_cpu_data.x86_mask;
+
+ switch (boot_cpu_data.x86) {
+ case 0xf:
+ /* feature available since SH-C0, exclude older revisions */
+ if (((model == 4) && (stepping == 0)) ||
+ ((model == 5) && (stepping <= 1))) {
+ err = -ENODEV;
+ goto exit_free;
+ }
+
+ /*
+ * AMD NPT family 0fh, i.e. RevF and RevG:
+ * meaning of SEL_CORE bit is inverted
+ */
+ if (model >= 0x40) {
+ data->swap_core_select = 1;
+ dev_warn(&pdev->dev, "Temperature readouts might be "
+ "wrong - check erratum #141\n");
+ }
+
+ if ((model >= 0x69) &&
+ !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+ /*
+ * RevG desktop CPUs (i.e. no socket S1G1 parts)
+ * need additional offset, otherwise reported
+ * temperature is below ambient temperature
+ */
+ data->temp_offset = 21000;
+ }
+
+ break;
+ }
+
pci_read_config_byte(pdev, REG_TEMP, &scfg);
scfg &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
pci_write_config_byte(pdev, REG_TEMP, scfg);
This driver can also be built as a module. If so, the module
will be called tsl2550.
-config MCU_MPC8349EMITX
- tristate "MPC8349E-mITX MCU driver"
- depends on I2C && PPC_83xx
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Say Y here to enable soft power-off functionality on the Freescale
- boards with the MPC8349E-mITX-compatible MCU chips. This driver will
- also register MCU GPIOs with the generic GPIO API, so you'll able
- to use MCU pins as GPIOs.
-
endmenu
obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
endchoice
-config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
- int "Maximum transfer size (KB) per request (up to 128)"
- default "128"
- depends on BLK_DEV_IDE_AU1XXX
-
config BLK_DEV_IDE_TX4938
tristate "TX4938 internal IDE support"
depends on SOC_TX4938
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
q->max_sectors / 2);
- if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+ if (ata_id_is_ssd(id))
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
/* calculate drive capacity, and select LBA if possible */
stat = tp_ops->read_status(hwif);
if (stat & ATA_BUSY) {
- local_irq_save(flags);
+ local_save_flags(flags);
local_irq_enable_in_hardirq();
timeout += jiffies;
while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
blk_pm_suspend_request(rq) ? "suspend" : "resume");
#endif
spin_lock_irqsave(q->queue_lock, flags);
- if (blk_pm_suspend_request(rq)) {
+ if (blk_pm_suspend_request(rq))
blk_stop_queue(q);
- } else {
+ else
drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
- blk_start_queue(q);
- }
spin_unlock_irqrestore(q->queue_lock, flags);
drive->hwif->rq = NULL;
* point.
*/
ide_hwif_t *hwif = drive->hwif;
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
int rc;
#ifdef DEBUG_PM
printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
rc = ide_wait_not_busy(hwif, 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
}
}
if (irqd)
disable_irq(hwif->irq);
- local_irq_save(flags);
+ local_save_flags(flags);
local_irq_enable_in_hardirq();
if (ide_port_wait_ready(hwif) == -EBUSY)
#define DRV_NAME "it821x"
+#define QUIRK_VORTEX86 1
+
struct it821x_dev
{
unsigned int smart:1, /* Are we in smart raid mode */
u16 pio[2]; /* Cached PIO values */
u16 mwdma[2]; /* Cached MWDMA values */
u16 udma[2]; /* Cached UDMA values (per drive) */
+ u16 quirks;
};
#define ATA_66 0
* this is necessary.
*/
- pci_read_config_byte(dev, 0x08, &conf);
- if (conf == 0x10) {
+ if (dev->revision == 0x10) {
idev->timing10 = 1;
hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
if (idev->smart == 0)
hwif->ultra_mask = ATA_UDMA6;
hwif->mwdma_mask = ATA_MWDMA2;
+
+ /* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
+ if (idev->quirks & QUIRK_VORTEX86) {
+ if (dev->revision == 0x11)
+ hwif->ultra_mask = 0;
+ }
}
static void it8212_disable_raid(struct pci_dev *dev)
return -ENOMEM;
}
+ itdevs->quirks = id->driver_data;
+
rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
if (rc)
kfree(itdevs);
static const struct pci_device_id it821x_pci_tbl[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
+ { PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
{ 0, },
};
.dma_ops = &sl82c105_dma_ops,
.host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
- IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
IDE_HFLAG_SERIALIZE_DMA |
IDE_HFLAG_NO_AUTODMA,
.pio_mask = ATA_PIO5,
.exec_command = ide_exec_command,
.read_status = ide_read_status,
.read_altstatus = ide_read_altstatus,
- .read_sff_dma_status = ide_read_sff_dma_status,
.set_irq = ide_set_irq,
if (via_clock < 20000 || via_clock > 50000) {
printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
"impossible (%d), using 33 MHz instead.\n", via_clock);
- printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
- "to assume 80-wire cable.\n");
via_clock = 33333;
}
struct ehca_eq *eq = &shca->eq;
int max = 3;
volatile u64 q_ofs, q_ofs2;
- u64 flags;
+ unsigned long flags;
spin_lock_irqsave(&eq->spinlock, flags);
q_ofs = eq->ipz_queue.current_q_offset;
spin_unlock_irqrestore(&eq->spinlock, flags);
{
static int mlx4_ib_version_printed;
struct mlx4_ib_dev *ibdev;
+ int num_ports = 0;
int i;
-
if (!mlx4_ib_version_printed) {
printk(KERN_INFO "%s", mlx4_ib_version);
++mlx4_ib_version_printed;
}
+ mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+ num_ports++;
+
+ /* No point in registering a device with no ports... */
+ if (num_ports == 0)
+ return NULL;
+
ibdev = (struct mlx4_ib_dev *) ib_alloc_device(sizeof *ibdev);
if (!ibdev) {
dev_err(&dev->pdev->dev, "Device struct alloc failed\n");
ibdev->ib_dev.owner = THIS_MODULE;
ibdev->ib_dev.node_type = RDMA_NODE_IB_CA;
ibdev->ib_dev.local_dma_lkey = dev->caps.reserved_lkey;
- ibdev->num_ports = 0;
- mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
- ibdev->num_ports++;
+ ibdev->num_ports = num_ports;
ibdev->ib_dev.phys_port_cnt = ibdev->num_ports;
ibdev->ib_dev.num_comp_vectors = dev->caps.num_comp_vectors;
ibdev->ib_dev.dma_device = &dev->pdev->dev;
unsigned long flags;
struct list_head *hte;
struct nes_cm_node *cm_node;
+ __be32 tmp_addr = cpu_to_be32(loc_addr);
/* get a handle on the hte */
hte = &cm_core->connected_nodes;
nes_debug(NES_DBG_CM, "Searching for an owner node: %pI4:%x from core %p->%p\n",
- &loc_addr, loc_port, cm_core, hte);
+ &tmp_addr, loc_port, cm_core, hte);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->ht_lock, flags);
{
unsigned long flags;
struct nes_cm_listener *listen_node;
+ __be32 tmp_addr = cpu_to_be32(dst_addr);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->listen_list_lock, flags);
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
- &dst_addr, dst_port);
+ &tmp_addr, dst_port);
/* no listener */
return NULL;
struct tcphdr *tcph;
struct nes_cm_info nfo;
int skb_handled = 1;
+ __be32 tmp_daddr, tmp_saddr;
if (!skb)
return 0;
nfo.rem_addr = ntohl(iph->saddr);
nfo.rem_port = ntohs(tcph->source);
+ tmp_daddr = cpu_to_be32(iph->daddr);
+ tmp_saddr = cpu_to_be32(iph->saddr);
+
nes_debug(NES_DBG_CM, "Received packet: dest=%pI4:0x%04X src=%pI4:0x%04X\n",
- &iph->daddr, tcph->dest, &iph->saddr, tcph->source);
+ &tmp_daddr, tcph->dest, &tmp_saddr, tcph->source);
do {
cm_node = find_node(cm_core,
struct nes_adapter *nesadapter = nesdev->nesadapter;
int arp_index;
int err = 0;
+ __be32 tmp_addr;
for (arp_index = 0; (u32) arp_index < nesadapter->arp_table_size; arp_index++) {
if (nesadapter->arp_table[arp_index].ip_addr == ip_addr)
/* DELETE or RESOLVE */
if (arp_index == nesadapter->arp_table_size) {
+ tmp_addr = cpu_to_be32(ip_addr);
nes_debug(NES_DBG_NETDEV, "MAC for %pI4 not in ARP table - cannot %s\n",
- &ip_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
+ &tmp_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
return -1;
}
neigh = *to_ipoib_neigh(skb->dst->neighbour);
- if (neigh->ah)
- if (unlikely((memcmp(&neigh->dgid.raw,
- skb->dst->neighbour->ha + 4,
- sizeof(union ib_gid))) ||
- (neigh->dev != dev))) {
- spin_lock_irqsave(&priv->lock, flags);
- /*
- * It's safe to call ipoib_put_ah() inside
- * priv->lock here, because we know that
- * path->ah will always hold one more reference,
- * so ipoib_put_ah() will never do more than
- * decrement the ref count.
- */
+ if (unlikely((memcmp(&neigh->dgid.raw,
+ skb->dst->neighbour->ha + 4,
+ sizeof(union ib_gid))) ||
+ (neigh->dev != dev))) {
+ spin_lock_irqsave(&priv->lock, flags);
+ /*
+ * It's safe to call ipoib_put_ah() inside
+ * priv->lock here, because we know that
+ * path->ah will always hold one more reference,
+ * so ipoib_put_ah() will never do more than
+ * decrement the ref count.
+ */
+ if (neigh->ah)
ipoib_put_ah(neigh->ah);
- list_del(&neigh->list);
- ipoib_neigh_free(dev, neigh);
- spin_unlock_irqrestore(&priv->lock, flags);
- ipoib_path_lookup(skb, dev);
- return NETDEV_TX_OK;
- }
+ list_del(&neigh->list);
+ ipoib_neigh_free(dev, neigh);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ipoib_path_lookup(skb, dev);
+ return NETDEV_TX_OK;
+ }
if (ipoib_cm_get(neigh)) {
if (ipoib_cm_up(neigh)) {
if (!priv->broadcast) {
struct ipoib_mcast *broadcast;
+ if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+ return;
+
broadcast = ipoib_mcast_alloc(dev, 1);
if (!broadcast) {
ipoib_warn(priv, "failed to allocate broadcast group\n");
config INFINIBAND_ISER
tristate "iSCSI Extensions for RDMA (iSER)"
- depends on SCSI && INET
+ depends on SCSI && INET && INFINIBAND_ADDR_TRANS
select SCSI_ISCSI_ATTRS
---help---
Support for the iSCSI Extensions for RDMA (iSER) Protocol
lp->dialstate = 0;
dev->rx_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
dev->st_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
- isdn_free_channel(lp->isdn_device, lp->isdn_channel, ISDN_USAGE_NET);
+ if (lp->isdn_device != -1 && lp->isdn_channel != -1)
+ isdn_free_channel(lp->isdn_device, lp->isdn_channel,
+ ISDN_USAGE_NET);
lp->flags &= ~ISDN_NET_CONNECTED;
lp->isdn_device = -1;
lp->isdn_channel = -1;
.ndo_stop = isdn_net_close,
.ndo_do_ioctl = isdn_net_ioctl,
- .ndo_validate_addr = NULL,
.ndo_start_xmit = isdn_net_start_xmit,
.ndo_get_stats = isdn_net_get_stats,
.ndo_tx_timeout = isdn_net_tx_timeout,
ether_setup(dev);
- dev->flags = IFF_NOARP | IFF_POINTOPOINT;
/* Setup the generic properties */
- dev->mtu = 1500;
dev->flags = IFF_NOARP|IFF_POINTOPOINT;
- dev->type = ARPHRD_ETHER;
- dev->addr_len = ETH_ALEN;
dev->header_ops = NULL;
dev->netdev_ops = &isdn_netdev_ops;
outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines.
-config LEDS_HP_DISK
- tristate "LED Support for disk protection LED on HP notebooks"
- depends on LEDS_CLASS && ACPI
- help
- This option enable support for disk protection LED, found on
- newer HP notebooks.
-
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
-obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
# LED Triggers
+++ /dev/null
-/*
- * leds-hp-disk.c - driver for HP "hard disk protection" LED
- *
- * Copyright (C) 2008 Pavel Machek
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/leds.h>
-#include <acpi/acpi_drivers.h>
-
-#define DRIVER_NAME "leds-hp-disk"
-#define ACPI_MDPS_CLASS "led"
-
-/* For automatic insertion of the module */
-static struct acpi_device_id hpled_device_ids[] = {
- {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, hpled_device_ids);
-
-struct acpi_hpled {
- struct acpi_device *device; /* The ACPI device */
-};
-
-static struct acpi_hpled adev;
-
-static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
-{
- unsigned long long ret; /* Not used when writing */
- union acpi_object in_obj[1];
- struct acpi_object_list args = { 1, in_obj };
-
- in_obj[0].type = ACPI_TYPE_INTEGER;
- in_obj[0].integer.value = reg;
-
- return acpi_evaluate_integer(handle, "ALED", &args, &ret);
-}
-
-static void hpled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- hpled_acpi_write(adev.device->handle, !!value);
-}
-
-static struct led_classdev hpled_led = {
- .name = "hp:red:hddprotection",
- .default_trigger = "heartbeat",
- .brightness_set = hpled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static int hpled_add(struct acpi_device *device)
-{
- int ret;
-
- if (!device)
- return -EINVAL;
-
- adev.device = device;
- strcpy(acpi_device_name(device), DRIVER_NAME);
- strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
- device->driver_data = &adev;
-
- ret = led_classdev_register(NULL, &hpled_led);
- return ret;
-}
-
-static int hpled_remove(struct acpi_device *device, int type)
-{
- if (!device)
- return -EINVAL;
-
- led_classdev_unregister(&hpled_led);
- return 0;
-}
-
-
-
-static struct acpi_driver leds_hp_driver = {
- .name = DRIVER_NAME,
- .class = ACPI_MDPS_CLASS,
- .ids = hpled_device_ids,
- .ops = {
- .add = hpled_add,
- .remove = hpled_remove,
- }
-};
-
-static int __init hpled_init_module(void)
-{
- int ret;
-
- if (acpi_disabled)
- return -ENODEV;
-
- ret = acpi_bus_register_driver(&leds_hp_driver);
- if (ret < 0)
- return ret;
-
- printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
-
- return 0;
-}
-
-static void __exit hpled_exit_module(void)
-{
- acpi_bus_unregister_driver(&leds_hp_driver);
-}
-
-MODULE_DESCRIPTION("Driver for HP disk protection LED");
-MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>");
-MODULE_LICENSE("GPL");
-
-module_init(hpled_init_module);
-module_exit(hpled_exit_module);
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.13
+ * mpi.h Version: 01.05.16
*
* Version History
* ---------------
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x10)
+#define MPI_HEADER_VERSION_UNIT (0x13)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.15
+ * mpi_cnfg.h Version: 01.05.18
*
* Version History
* ---------------
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
*/
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
/* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT (0x0010)
#define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA (0x0008)
#define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE (0x0004)
#define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE (0x0002)
/* IOC Page 6 Capabilities Flags */
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT (0x00000010)
#define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING (0x00000008)
#define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006)
#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05)
#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U64 ReassignmentBaseWWID; /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+ BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION (0x00)
+
/****************************************************************************
* SCSI Port Config Pages
#define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
#define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX (1)
+#endif
+
typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
{
CONFIG_PAGE_HEADER Header; /* 00h */
U8 PhysDiskNum; /* 05h */
U16 Reserved2; /* 06h */
U32 Reserved1; /* 08h */
- RAID_PHYS_DISK1_PATH Path[1]; /* 0Ch */
+ RAID_PHYS_DISK1_PATH Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
} CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
#define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
/* specific values for SATA Init failures */
#define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
#define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_fc.h
MPI Header File Change History
==============================
- Copyright (c) 2000-2007 LSI Corporation.
+ Copyright (c) 2000-2008 LSI Corporation.
---------------------------------------
- Header Set Release Version: 01.05.16
- Header Set Release Date: 05-24-07
+ Header Set Release Version: 01.05.19
+ Header Set Release Date: 03-28-08
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.13 01.05.12
- mpi_ioc.h 01.05.14 01.05.13
- mpi_cnfg.h 01.05.15 01.05.14
+ mpi.h 01.05.16 01.05.15
+ mpi_ioc.h 01.05.16 01.05.15
+ mpi_cnfg.h 01.05.18 01.05.17
mpi_init.h 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
- mpi_raid.h 01.05.03 01.05.03
+ mpi_raid.h 01.05.05 01.05.05
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
- mpi_sas.h 01.05.04 01.05.04
+ mpi_sas.h 01.05.05 01.05.05
mpi_type.h 01.05.02 01.05.02
- mpi_history.txt 01.05.14 01.05.14
+ mpi_history.txt 01.05.19 01.05.18
* Date Version Description
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
* 08-08-01 01.02.01 Original release for v1.2 work.
* New format for FWVersion and ProductId in
* MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- * 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
* related structure and defines.
* Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
* Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
* Added MaxInitiators field to PortFacts reply.
* Added SAS Device Status Change ReasonCode for
- * asynchronous notification.
+ * asynchronous notificaiton.
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
* data structure.
* Added new ImageType values for FWDownload and FWUpload
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
mpi_cnfg.h
* Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
* page and updated the page version.
* Added Information field and _INFO_PARAMS_NEGOTIATED
- * definition to SCSI_DEVICE_0 page.
+ * definitionto SCSI_DEVICE_0 page.
* 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
* page version.
* Added BucketsRemaining to LAN_1 page, redefined the
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
mpi_init.h
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
mpi_tool.h
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
mpi_type.h
mpi_history.txt Parts list history
-Filename 01.05.15 01.05.15
----------- -------- --------
-mpi.h 01.05.12 01.05.13
-mpi_ioc.h 01.05.13 01.05.14
-mpi_cnfg.h 01.05.14 01.05.15
-mpi_init.h 01.05.09 01.05.09
-mpi_targ.h 01.05.06 01.05.06
-mpi_fc.h 01.05.01 01.05.01
-mpi_lan.h 01.05.01 01.05.01
-mpi_raid.h 01.05.03 01.05.03
-mpi_tool.h 01.05.03 01.05.03
-mpi_inb.h 01.05.01 01.05.01
-mpi_sas.h 01.05.04 01.05.04
-mpi_type.h 01.05.02 01.05.02
+Filename 01.05.19 01.05.18 01.05.17 01.05.16 01.05.15
+---------- -------- -------- -------- -------- --------
+mpi.h 01.05.16 01.05.15 01.05.14 01.05.13 01.05.12
+mpi_ioc.h 01.05.16 01.05.15 01.05.15 01.05.14 01.05.13
+mpi_cnfg.h 01.05.18 01.05.17 01.05.16 01.05.15 01.05.14
+mpi_init.h 01.05.09 01.05.09 01.05.09 01.05.09 01.05.09
+mpi_targ.h 01.05.06 01.05.06 01.05.06 01.05.06 01.05.06
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.05 01.05.05 01.05.04 01.05.03 01.05.03
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.05 01.05.05 01.05.04 01.05.04 01.05.04
+mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
---------- -------- -------- -------- -------- -------- --------
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_init.h
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.14
+ * mpi_ioc.h Version: 01.05.16
*
* Version History
* ---------------
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
*/
#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET (0x0E)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL (0x0F)
/* SCSI Event data for Queue Full event */
#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)
#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)
#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED (0x08)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED (0x09)
/* defines for logical disk states */
#define MPI_LD_STATE_OPTIMAL (0x00)
#define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE (0x00004000)
/* SAS SMP Error Event data */
/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI_EVENT_SAS_INIT_RC_REMOVED (0x02)
+#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE (0x03)
/* SAS Initiator Device Table Overflow Event data */
U8 MaxInit; /* 00h */
U8 CurrentInit; /* 01h */
U16 Reserved1; /* 02h */
+ U64 SASAddress; /* 04h */
} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MpiEventDataSasInitTableOverflow_t,
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_lan.h
/*
- * Copyright (c) 2000-2001 LSI Corporation. All rights reserved.
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
*
* NAME: fc_log.h
* SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
/***************************************************************************
* *
- * Copyright 2003 LSI Corporation. All rights reserved. *
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved. *
* *
* Description *
* ------------ *
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT (0x00080000)
+
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
-#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST (0x00000011)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
- /* Bit 0 is Status Bit 0: FrameXferErr */
- /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
- /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
+/* Bits 0-3 encode Transport Status Register (offset 0x08) */
+/* Bit 0 is Status Bit 0: FrameXferErr */
+/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION (0x00002000)
+/* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)
/* Activation failed trying to import the volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS (0x00010016)
/* Phys Disk failed, too many phys disks */
#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
/* Compatibility Error : IME size limited to < 2TB */
#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE (0x00010056)
+
/****************************************************************************/
/* Defines for convenience */
/*
- * Copyright (c) 2001-2007 LSI Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_raid.h
* Title: MPI RAID message and structures
* Creation Date: February 27, 2001
*
- * mpi_raid.h Version: 01.05.03
+ * mpi_raid.h Version: 01.05.05
*
* Version History
* ---------------
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
*/
#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)
#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)
#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME (0x16)
/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002)
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD (0x00000001)
+
/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
/*
- * Copyright (c) 2004-2006 LSI Corporation.
+ * Copyright (c) 2004-2008 LSI Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.04
+ * mpi_sas.h Version: 01.05.05
*
* Version History
* ---------------
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
*/
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
+
#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 TargetID; /* 0Ch */
U8 PrimFlags; /* 0Fh */
U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved4; /* 1Ch */
+ U32 IOCParameterValue; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_targ.h
/*
- * Copyright (c) 2001-2005 LSI Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_tool.h
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_type.h
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
- * mpi_type.h Version: 01.05.01
+ * mpi_type.h Version: 01.05.02
*
* Version History
* ---------------
/*
* cmd line parameters
*/
-static int mpt_msi_enable = -1;
-module_param(mpt_msi_enable, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
+static int mpt_msi_enable_spi;
+module_param(mpt_msi_enable_spi, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
+ controllers (default=0)");
+
+static int mpt_msi_enable_fc;
+module_param(mpt_msi_enable_fc, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
+ controllers (default=0)");
+
+static int mpt_msi_enable_sas;
+module_param(mpt_msi_enable_sas, int, 1);
+MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
+ controllers (default=1)");
+
static int mpt_channel_mapping;
module_param(mpt_channel_mapping, int, 0);
static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
&mpt_debug_level, 0600);
-MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h - (default=0)");
+MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
+ - (default=0)");
+
+int mpt_fwfault_debug;
+EXPORT_SYMBOL(mpt_fwfault_debug);
+module_param_call(mpt_fwfault_debug, param_set_int, param_get_int,
+ &mpt_fwfault_debug, 0600);
+MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
+ " and halt Firmware on fault - (default=0)");
+
+
#ifdef MFCNT
static int mfcounter = 0;
ioc->bus_type = SAS;
}
- if (mpt_msi_enable == -1) {
- /* Enable on SAS, disable on FC and SPI */
- if (ioc->bus_type == SAS)
- ioc->msi_enable = 1;
- else
- ioc->msi_enable = 0;
- } else
- /* follow flag: 0 - disable; 1 - enable */
- ioc->msi_enable = mpt_msi_enable;
+ switch (ioc->bus_type) {
+
+ case SAS:
+ ioc->msi_enable = mpt_msi_enable_sas;
+ break;
+
+ case SPI:
+ ioc->msi_enable = mpt_msi_enable_spi;
+ break;
+
+ case FC:
+ ioc->msi_enable = mpt_msi_enable_fc;
+ break;
+
+ default:
+ ioc->msi_enable = 0;
+ break;
+ }
if (ioc->errata_flag_1064)
pci_disable_io_access(pdev);
*size = y;
}
+
+/**
+ * mpt_halt_firmware - Halts the firmware if it is operational and panic
+ * the kernel
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_halt_firmware(MPT_ADAPTER *ioc)
+{
+ u32 ioc_raw_state;
+
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+ printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
+ ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
+ ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+ } else {
+ CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
+ panic("%s: Firmware is halted due to command timeout\n",
+ ioc->name);
+ }
+}
+EXPORT_SYMBOL(mpt_halt_firmware);
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Reset Handling
printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
printk("MF count 0x%x !\n", ioc->mfcnt);
#endif
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
/* Reset the adapter. Prevent more than 1 call to
* mpt_do_ioc_recovery at any instant in time.
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern void mpt_halt_firmware(MPT_ADAPTER *ioc);
+
/*
* Public data decl's...
*/
extern struct list_head ioc_list;
+extern int mpt_fwfault_debug;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif /* } __KERNEL__ */
if (hd->timeouts < -1)
hd->timeouts++;
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
+
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
* (the IO to be ABORT'd)
*
return e;
}
-static void __init clocks_init(void)
+static void __init clocks_init(struct device *dev)
{
int e = 0;
struct clk *osc;
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (cpu_is_omap2430())
- osc = clk_get(NULL, "osc_ck");
+ osc = clk_get(dev, "osc_ck");
else
- osc = clk_get(NULL, "osc_sys_ck");
+ osc = clk_get(dev, "osc_sys_ck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl4030 internal clock init and "
inuse = true;
/* setup clock framework */
- clocks_init();
+ clocks_init(&client->dev);
/* Maybe init the T2 Interrupt subsystem */
if (client->irq
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
-obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
part_sn2->remote_vars_pa);
- part->last_heartbeat = remote_vars->heartbeat;
+ part->last_heartbeat = remote_vars->heartbeat - 1;
dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
part->last_heartbeat);
.ndo_get_stats = ei_get_stats,
.ndo_set_multicast_list = ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_addr = eth_set_mac_addr,
+ .ndo_set_mac_address = eth_set_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ei_poll,
#define __ei_open ax_ei_open
#define __ei_close ax_ei_close
#define __ei_poll ax_ei_poll
+#define __ei_start_xmit ax_ei_start_xmit
#define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_get_stats ax_ei_get_stats
+#define __ei_set_multicast_list ax_ei_set_multicast_list
#define __ei_interrupt ax_ei_interrupt
#define ____alloc_ei_netdev ax__alloc_ei_netdev
#define __NS8390_init ax_NS8390_init
}
#endif
+static const struct net_device_ops ax_netdev_ops = {
+ .ndo_open = ax_open,
+ .ndo_stop = ax_close,
+ .ndo_do_ioctl = ax_ioctl,
+
+ .ndo_start_xmit = ax_ei_start_xmit,
+ .ndo_tx_timeout = ax_ei_tx_timeout,
+ .ndo_get_stats = ax_ei_get_stats,
+ .ndo_set_multicast_list = ax_ei_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ax_ei_poll,
+#endif
+};
+
/* setup code */
static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
ei_status.get_8390_hdr = &ax_get_8390_hdr;
ei_status.priv = 0;
- dev->open = ax_open;
- dev->stop = ax_close;
- dev->do_ioctl = ax_ioctl;
+ dev->netdev_ops = &ax_netdev_ops;
dev->ethtool_ops = &ax_ethtool_ops;
ax->msg_enable = NETIF_MSG_LINK;
ax->mii.mdio_write = ax_phy_write;
ax->mii.dev = dev;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ax_ei_poll;
-#endif
ax_NS8390_init(dev, 0);
if (first_init)
dev_kfree_skb_any(skb);
return -ENOMEM;
}
+ bp->force_copybreak = 1;
}
rh = (struct rx_header *) skb->data;
/* Omit CRC. */
len -= 4;
- if (len > RX_COPY_THRESHOLD) {
+ if (!bp->force_copybreak && len > RX_COPY_THRESHOLD) {
int skb_size;
skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
if (skb_size < 0)
bp = netdev_priv(dev);
bp->sdev = sdev;
bp->dev = dev;
+ bp->force_copybreak = 0;
bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
u32 rx_pending;
u32 tx_pending;
u8 phy_addr;
-
+ u8 force_copybreak;
struct mii_if_info mii_if;
};
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN 1
+#endif
+
+
/* error/debug prints */
#define DRV_MODULE_NAME "bnx2x"
#endif
-#ifdef NETIF_F_HW_VLAN_TX
-#define BCM_VLAN 1
-#endif
-
-
#define U64_LO(x) (u32)(((u64)(x)) & 0xffffffff)
#define U64_HI(x) (u32)(((u64)(x)) >> 32)
#define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo))
#define PAGES_PER_SGE_SHIFT 0
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
+#define SGE_PAGE_SIZE PAGE_SIZE
+#define SGE_PAGE_SHIFT PAGE_SHIFT
+#define SGE_PAGE_ALIGN(addr) PAGE_ALIGN(addr)
#define BCM_RX_ETH_PAYLOAD_ALIGN 64
struct bnx2x_fastpath fp[MAX_CONTEXT];
void __iomem *regview;
void __iomem *doorbells;
-#define BNX2X_DB_SIZE (16*2048)
+#define BNX2X_DB_SIZE (16*BCM_PAGE_SIZE)
struct net_device *dev;
struct pci_dev *pdev;
#define TPA_ENABLE_FLAG 0x80
#define NO_MCP_FLAG 0x100
#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG)
+#define HW_VLAN_TX_FLAG 0x400
+#define HW_VLAN_RX_FLAG 0x800
int func;
#define BP_PORT(bp) (bp->func % PORT_MAX)
int pm_cap;
int pcie_cap;
- struct work_struct sp_task;
+ struct delayed_work sp_task;
struct work_struct reset_task;
struct timer_list timer;
#include <linux/time.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
- #include <linux/if_vlan.h>
-#endif
+#include <linux/if_vlan.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <net/checksum.h>
module_param(use_multi, int, 0);
MODULE_PARM_DESC(use_multi, "use per-CPU queues");
#endif
+static struct workqueue_struct *bnx2x_wq;
enum bnx2x_board_type {
BCM57710 = 0,
synchronize_irq(bp->pdev->irq);
/* make sure sp_task is not running */
- cancel_work_sync(&bp->sp_task);
+ cancel_delayed_work(&bp->sp_task);
+ flush_workqueue(bnx2x_wq);
}
/* fast path */
return;
pci_unmap_page(bp->pdev, pci_unmap_addr(sw_buf, mapping),
- BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+ SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
__free_pages(page, PAGES_PER_SGE_SHIFT);
sw_buf->page = NULL;
if (unlikely(page == NULL))
return -ENOMEM;
- mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
+ mapping = pci_map_page(bp->pdev, page, 0, SGE_PAGE_SIZE*PAGES_PER_SGE,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
__free_pages(page, PAGES_PER_SGE_SHIFT);
struct eth_fast_path_rx_cqe *fp_cqe)
{
struct bnx2x *bp = fp->bp;
- u16 sge_len = BCM_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
+ u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
le16_to_cpu(fp_cqe->len_on_bd)) >>
- BCM_PAGE_SHIFT;
+ SGE_PAGE_SHIFT;
u16 last_max, last_elem, first_elem;
u16 delta = 0;
u16 i;
u16 cqe_idx)
{
struct sw_rx_page *rx_pg, old_rx_pg;
- struct page *sge;
u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
u32 i, frag_len, frag_size, pages;
int err;
int j;
frag_size = le16_to_cpu(fp_cqe->pkt_len) - len_on_bd;
- pages = BCM_PAGE_ALIGN(frag_size) >> BCM_PAGE_SHIFT;
+ pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
/* This is needed in order to enable forwarding support */
if (frag_size)
- skb_shinfo(skb)->gso_size = min((u32)BCM_PAGE_SIZE,
+ skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
max(frag_size, (u32)len_on_bd));
#ifdef BNX2X_STOP_ON_ERROR
- if (pages > 8*PAGES_PER_SGE) {
+ if (pages >
+ min((u32)8, (u32)MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE) {
BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
pages, cqe_idx);
BNX2X_ERR("fp_cqe->pkt_len = %d fp_cqe->len_on_bd = %d\n",
/* FW gives the indices of the SGE as if the ring is an array
(meaning that "next" element will consume 2 indices) */
- frag_len = min(frag_size, (u32)(BCM_PAGE_SIZE*PAGES_PER_SGE));
+ frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
rx_pg = &fp->rx_page_ring[sge_idx];
- sge = rx_pg->page;
old_rx_pg = *rx_pg;
/* If we fail to allocate a substitute page, we simply stop
/* Unmap the page as we r going to pass it to the stack */
pci_unmap_page(bp->pdev, pci_unmap_addr(&old_rx_pg, mapping),
- BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+ SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
/* Add one frag and update the appropriate fields in the skb */
skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
if (likely(new_skb)) {
/* fix ip xsum and give it to the stack */
/* (no need to map the new skb) */
+#ifdef BCM_VLAN
+ int is_vlan_cqe =
+ (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
+ PARSING_FLAGS_VLAN);
+ int is_not_hwaccel_vlan_cqe =
+ (is_vlan_cqe && (!(bp->flags & HW_VLAN_RX_FLAG)));
+#endif
prefetch(skb);
prefetch(((char *)(skb)) + 128);
struct iphdr *iph;
iph = (struct iphdr *)skb->data;
+#ifdef BCM_VLAN
+ /* If there is no Rx VLAN offloading -
+ take VLAN tag into an account */
+ if (unlikely(is_not_hwaccel_vlan_cqe))
+ iph = (struct iphdr *)((u8 *)iph + VLAN_HLEN);
+#endif
iph->check = 0;
iph->check = ip_fast_csum((u8 *)iph, iph->ihl);
}
if (!bnx2x_fill_frag_skb(bp, fp, skb,
&cqe->fast_path_cqe, cqe_idx)) {
#ifdef BCM_VLAN
- if ((bp->vlgrp != NULL) &&
- (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
- PARSING_FLAGS_VLAN))
+ if ((bp->vlgrp != NULL) && is_vlan_cqe &&
+ (!is_not_hwaccel_vlan_cqe))
vlan_hwaccel_receive_skb(skb, bp->vlgrp,
le16_to_cpu(cqe->fast_path_cqe.
vlan_tag));
rx_prods.cqe_prod = rx_comp_prod;
rx_prods.sge_prod = rx_sge_prod;
+ /*
+ * Make sure that the BD and SGE data is updated before updating the
+ * producers since FW might read the BD/SGE right after the producer
+ * is updated.
+ * This is only applicable for weak-ordered memory model archs such
+ * as IA-64. The following barrier is also mandatory since FW will
+ * assumes BDs must have buffers.
+ */
+ wmb();
+
for (i = 0; i < sizeof(struct tstorm_eth_rx_producers)/4; i++)
REG_WR(bp, BAR_TSTRORM_INTMEM +
TSTORM_RX_PRODS_OFFSET(BP_PORT(bp), FP_CL_ID(fp)) + i*4,
((u32 *)&rx_prods)[i]);
+ mmiowb(); /* keep prod updates ordered */
+
DP(NETIF_MSG_RX_STATUS,
"Wrote: bd_prod %u cqe_prod %u sge_prod %u\n",
bd_prod, rx_comp_prod, rx_sge_prod);
DP(NETIF_MSG_RX_STATUS, "CQE type %x err %x status %x"
" queue %x vlan %x len %u\n", CQE_TYPE(cqe_fp_flags),
cqe_fp_flags, cqe->fast_path_cqe.status_flags,
- cqe->fast_path_cqe.rss_hash_result,
+ le32_to_cpu(cqe->fast_path_cqe.rss_hash_result),
le16_to_cpu(cqe->fast_path_cqe.vlan_tag),
le16_to_cpu(cqe->fast_path_cqe.pkt_len));
}
#ifdef BCM_VLAN
- if ((bp->vlgrp != NULL) &&
+ if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) &&
(le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
PARSING_FLAGS_VLAN))
vlan_hwaccel_receive_skb(skb, bp->vlgrp,
/* Update producers */
bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
fp->rx_sge_prod);
- mmiowb(); /* keep prod updates ordered */
fp->rx_pkt += rx_pkt;
fp->rx_calls++;
if (unlikely(status & 0x1)) {
- schedule_work(&bp->sp_task);
+ queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
status &= ~0x1;
if (!status)
static void bnx2x_calc_fc_adv(struct bnx2x *bp)
{
- switch (bp->link_vars.ieee_fc) {
+ switch (bp->link_vars.ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
bnx2x_release_phy_lock(bp);
+ bnx2x_calc_fc_adv(bp);
+
if (bp->link_vars.link_up)
bnx2x_link_report(bp);
- bnx2x_calc_fc_adv(bp);
return rc;
}
/* Make sure that we are synced with the current statistics */
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
- bnx2x_acquire_phy_lock(bp);
bnx2x_link_update(&bp->link_params, &bp->link_vars);
- bnx2x_release_phy_lock(bp);
if (bp->link_vars.link_up) {
if (asserted & ATTN_HARD_WIRED_MASK) {
if (asserted & ATTN_NIG_FOR_FUNC) {
+ bnx2x_acquire_phy_lock(bp);
+
/* save nig interrupt mask */
bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
REG_WR(bp, nig_int_mask_addr, 0);
REG_WR(bp, hc_addr, asserted);
/* now set back the mask */
- if (asserted & ATTN_NIG_FOR_FUNC)
+ if (asserted & ATTN_NIG_FOR_FUNC) {
REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+ bnx2x_release_phy_lock(bp);
+ }
}
static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
static void bnx2x_attn_int(struct bnx2x *bp)
{
/* read local copy of bits */
- u32 attn_bits = bp->def_status_blk->atten_status_block.attn_bits;
- u32 attn_ack = bp->def_status_blk->atten_status_block.attn_bits_ack;
+ u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
+ attn_bits);
+ u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
+ attn_bits_ack);
u32 attn_state = bp->attn_state;
/* look for changed bits */
static void bnx2x_sp_task(struct work_struct *work)
{
- struct bnx2x *bp = container_of(work, struct bnx2x, sp_task);
+ struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
u16 status;
if (status & 0x2)
bp->stats_pending = 0;
- bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, bp->def_att_idx,
+ bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, le16_to_cpu(bp->def_att_idx),
IGU_INT_NOP, 1);
bnx2x_ack_sb(bp, DEF_SB_ID, USTORM_ID, le16_to_cpu(bp->def_u_idx),
IGU_INT_NOP, 1);
return IRQ_HANDLED;
#endif
- schedule_work(&bp->sp_task);
+ queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
return IRQ_HANDLED;
}
#define ADD_64(s_hi, a_hi, s_lo, a_lo) \
do { \
s_lo += a_lo; \
- s_hi += a_hi + (s_lo < a_lo) ? 1 : 0; \
+ s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \
} while (0)
/* difference = minuend - subtrahend */
static void bnx2x_init_ind_table(struct bnx2x *bp)
{
- int port = BP_PORT(bp);
+ int func = BP_FUNC(bp);
int i;
if (!is_multi(bp))
DP(NETIF_MSG_IFUP, "Initializing indirection table\n");
for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
REG_WR8(bp, BAR_TSTRORM_INTMEM +
- TSTORM_INDIRECTION_TABLE_OFFSET(port) + i,
- i % bp->num_queues);
-
- REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+ TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
+ BP_CL_ID(bp) + (i % bp->num_queues));
}
static void bnx2x_set_client_config(struct bnx2x *bp)
int port = BP_PORT(bp);
int i;
- tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
+ tstorm_client.mtu = bp->dev->mtu;
tstorm_client.statistics_counter_id = BP_CL_ID(bp);
tstorm_client.config_flags =
TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
#ifdef BCM_VLAN
- if (bp->rx_mode && bp->vlgrp) {
+ if (bp->rx_mode && bp->vlgrp && (bp->flags & HW_VLAN_RX_FLAG)) {
tstorm_client.config_flags |=
TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
if (bp->flags & TPA_ENABLE_FLAG) {
tstorm_client.max_sges_for_packet =
- BCM_PAGE_ALIGN(tstorm_client.mtu) >> BCM_PAGE_SHIFT;
+ SGE_PAGE_ALIGN(tstorm_client.mtu) >> SGE_PAGE_SHIFT;
tstorm_client.max_sges_for_packet =
((tstorm_client.max_sges_for_packet +
PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE - 1))) >>
bp->e1hov);
}
- /* Init CQ ring mapping and aggregation size */
- max_agg_size = min((u32)(bp->rx_buf_size +
- 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
- (u32)0xffff);
+ /* Init CQ ring mapping and aggregation size, the FW limit is 8 frags */
+ max_agg_size =
+ min((u32)(min((u32)8, (u32)MAX_SKB_FRAGS) *
+ SGE_PAGE_SIZE * PAGES_PER_SGE),
+ (u32)0xffff);
for_each_queue(bp, i) {
struct bnx2x_fastpath *fp = &bp->fp[i];
bnx2x_init_context(bp);
bnx2x_init_internal(bp, load_code);
bnx2x_init_ind_table(bp);
+ bnx2x_stats_init(bp);
+
+ /* At this point, we are ready for interrupts */
+ atomic_set(&bp->intr_sem, 0);
+
+ /* flush all before enabling interrupts */
+ mb();
+ mmiowb();
+
bnx2x_int_enable(bp);
}
REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
- REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 1);
/* REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
}
bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+ REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
/* set NIC mode */
REG_WR(bp, PRS_REG_NIC_MODE, 1);
if (CHIP_IS_E1H(bp))
}
}
- bnx2x_stats_init(bp);
-
bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
- /* Enable Rx interrupt handling before sending the ramrod
- as it's completed on Rx FP queue */
- bnx2x_napi_enable(bp);
-
- /* Enable interrupt handling */
- atomic_set(&bp->intr_sem, 0);
-
rc = bnx2x_setup_leading(bp);
if (rc) {
BNX2X_ERR("Setup leading failed!\n");
mutex_init(&bp->port.phy_mutex);
- INIT_WORK(&bp->sp_task, bnx2x_sp_task);
+ INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
INIT_WORK(&bp->reset_task, bnx2x_reset_task);
rc = bnx2x_get_hwinfo(bp);
tx_bd->general_data = ((UNICAST_ADDRESS <<
ETH_TX_BD_ETH_ADDR_TYPE_SHIFT) | 1);
+ wmb();
+
fp->hw_tx_prods->bds_prod =
cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + 1);
mb(); /* FW restriction: must not reorder writing nbd and packets */
/* Update producers */
bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
fp->rx_sge_prod);
- mmiowb(); /* keep prod updates ordered */
test_loopback_exit:
bp->link_params.loopback_mode = LOOPBACK_NONE;
"sending pkt %u @%p next_idx %u bd %u @%p\n",
pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_bd);
- if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb)) {
+#ifdef BCM_VLAN
+ if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb) &&
+ (bp->flags & HW_VLAN_TX_FLAG)) {
tx_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
vlan_off += 4;
} else
+#endif
tx_bd->vlan = cpu_to_le16(pkt_prod);
if (xmit_type) {
DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d bd %u\n", nbd, bd_prod);
+ /*
+ * Make sure that the BD data is updated before updating the producer
+ * since FW might read the BD right after the producer is updated.
+ * This is only applicable for weak-ordered memory model archs such
+ * as IA-64. The following barrier is also mandatory since FW will
+ * assumes packets must have BDs.
+ */
+ wmb();
+
fp->hw_tx_prods->bds_prod =
cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
mb(); /* FW restriction: must not reorder writing nbd and packets */
dev->trans_start = jiffies;
if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
+ /* We want bnx2x_tx_int to "see" the updated tx_bd_prod
+ if we put Tx into XOFF state. */
+ smp_mb();
netif_stop_queue(dev);
bp->eth_stats.driver_xoff++;
if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
struct bnx2x *bp = netdev_priv(dev);
bp->vlgrp = vlgrp;
+
+ /* Set flags according to the required capabilities */
+ bp->flags &= ~(HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+ if (dev->features & NETIF_F_HW_VLAN_TX)
+ bp->flags |= HW_VLAN_TX_FLAG;
+
+ if (dev->features & NETIF_F_HW_VLAN_RX)
+ bp->flags |= HW_VLAN_RX_FLAG;
+
if (netif_running(dev))
bnx2x_set_client_config(bp);
}
dev->features |= NETIF_F_HIGHDMA;
#ifdef BCM_VLAN
dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+ bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
#endif
dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
dev->features |= NETIF_F_TSO6;
static int __init bnx2x_init(void)
{
+ bnx2x_wq = create_singlethread_workqueue("bnx2x");
+ if (bnx2x_wq == NULL) {
+ printk(KERN_ERR PFX "Cannot create workqueue\n");
+ return -ENOMEM;
+ }
+
return pci_register_driver(&bnx2x_pci_driver);
}
static void __exit bnx2x_cleanup(void)
{
pci_unregister_driver(&bnx2x_pci_driver);
+
+ destroy_workqueue(bnx2x_wq);
}
module_init(bnx2x_init);
int x;
unsigned char *deb = adr;
for (x = 0; x < len; x += 16) {
- printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
+ printk(DRV_NAME " %s adr=%p ofs=%04x %016llx %016llx\n", msg,
deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
deb += 16;
}
while (eqe) {
qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
- ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
+ ehea_error("QP aff_err: entry=0x%llx, token=0x%x",
eqe->entry, qp_token);
qp = port->port_res[qp_token].qp;
netif_stop_queue(port->netdev);
break;
default:
- ehea_error("unknown event code %x, eqe=0x%lX", ec, eqe);
+ ehea_error("unknown event code %x, eqe=0x%llX", ec, eqe);
break;
}
}
}
if (dev->mc_count > port->adapter->max_mc_mac) {
- ehea_info("Mcast registration limit reached (0x%lx). "
+ ehea_info("Mcast registration limit reached (0x%llx). "
"Use ALLMULTI!",
port->adapter->max_mc_mac);
goto out;
cq->fw_handle, rpage, 1);
if (hret < H_SUCCESS) {
ehea_error("register_rpage_cq failed ehea_cq=%p "
- "hret=%lx counter=%i act_pages=%i",
+ "hret=%llx counter=%i act_pages=%i",
cq, hret, counter, cq->attr.nr_pages);
goto out_kill_hwq;
}
if ((hret != H_SUCCESS) || (vpage)) {
ehea_error("registration of pages not "
- "complete hret=%lx\n", hret);
+ "complete hret=%llx\n", hret);
goto out_kill_hwq;
}
} else {
if (hret != H_PAGE_REGISTERED) {
ehea_error("CQ: registration of page failed "
- "hret=%lx\n", hret);
+ "hret=%llx\n", hret);
goto out_kill_hwq;
}
}
length = EHEA_PAGESIZE;
if (type == 0x8) /* Queue Pair */
- ehea_error("QP (resource=%lX) state: AER=0x%lX, AERR=0x%lX, "
- "port=%lX", resource, data[6], data[12], data[22]);
+ ehea_error("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, "
+ "port=%llX", resource, data[6], data[12], data[22]);
if (type == 0x4) /* Completion Queue */
- ehea_error("CQ (resource=%lX) state: AER=0x%lX", resource,
+ ehea_error("CQ (resource=%llX) state: AER=0x%llX", resource,
data[6]);
if (type == 0x3) /* Event Queue */
- ehea_error("EQ (resource=%lX) state: AER=0x%lX", resource,
+ ehea_error("EQ (resource=%llX) state: AER=0x%llX", resource,
data[6]);
ehea_dump(data, length, "error data");
rblock);
if (ret == H_R_STATE)
- ehea_error("No error data is available: %lX.", res_handle);
+ ehea_error("No error data is available: %llX.", res_handle);
else if (ret == H_SUCCESS)
print_error_data(rblock);
else
- ehea_error("Error data could not be fetched: %lX", res_handle);
+ ehea_error("Error data could not be fetched: %llX", res_handle);
kfree(rblock);
}
err = fs_init_phy(dev);
if (err) {
+ free_irq(fep->interrupt, dev);
if (fep->fpi->use_napi)
napi_disable(&fep->napi);
return err;
static void gfar_schedule_cleanup(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->txlock, flags);
+ spin_lock(&priv->rxlock);
+
if (netif_rx_schedule_prep(&priv->napi)) {
gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
__netif_rx_schedule(&priv->napi);
}
+
+ spin_unlock(&priv->rxlock);
+ spin_unlock_irqrestore(&priv->txlock, flags);
}
/* Interrupt Handler for Transmit complete */
INIT_LIST_HEAD(&mal->list);
spin_lock_init(&mal->lock);
- netif_napi_add(NULL, &mal->napi, mal_poll,
+ init_dummy_netdev(&mal->dummy_dev);
+
+ netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll,
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
/* Load power-on reset defaults */
int index;
spinlock_t lock;
+ struct net_device dummy_dev;
+
unsigned int features;
};
if(lpar_rc != H_SUCCESS) {
ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
- ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
+ ibmveth_error_printk("buffer TCE:0x%llx filter TCE:0x%llx rxq desc:0x%llx MAC:0x%llx\n",
adapter->buffer_list_dma,
adapter->filter_list_dma,
rxq_desc.desc,
seq_printf(seq, "Firmware MAC: %pM\n", firmware_mac);
seq_printf(seq, "\nAdapter Statistics:\n");
- seq_printf(seq, " TX: vio_map_single failres: %ld\n", adapter->tx_map_failed);
- seq_printf(seq, " send failures: %ld\n", adapter->tx_send_failed);
- seq_printf(seq, " RX: replenish task cycles: %ld\n", adapter->replenish_task_cycles);
- seq_printf(seq, " alloc_skb_failures: %ld\n", adapter->replenish_no_mem);
- seq_printf(seq, " add buffer failures: %ld\n", adapter->replenish_add_buff_failure);
- seq_printf(seq, " invalid buffers: %ld\n", adapter->rx_invalid_buffer);
- seq_printf(seq, " no buffers: %ld\n", adapter->rx_no_buffer);
+ seq_printf(seq, " TX: vio_map_single failres: %lld\n", adapter->tx_map_failed);
+ seq_printf(seq, " send failures: %lld\n", adapter->tx_send_failed);
+ seq_printf(seq, " RX: replenish task cycles: %lld\n", adapter->replenish_task_cycles);
+ seq_printf(seq, " alloc_skb_failures: %lld\n", adapter->replenish_no_mem);
+ seq_printf(seq, " add buffer failures: %lld\n", adapter->replenish_add_buff_failure);
+ seq_printf(seq, " invalid buffers: %lld\n", adapter->rx_invalid_buffer);
+ seq_printf(seq, " no buffers: %lld\n", adapter->rx_no_buffer);
return 0;
}
{
unsigned int i;
int ret;
- char stir421x_fw_name[11];
+ char stir421x_fw_name[12];
const struct firmware *fw;
const unsigned char *fw_version_ptr; /* pointer to version string */
unsigned long fw_version = 0;
SIMPLE_PORT_ATTR(num_mcast);
CUSTOM_PORT_ATTR(lpar_map, "0x%X\n", port->lpar_map);
CUSTOM_PORT_ATTR(stopped_map, "0x%X\n", port->stopped_map);
-CUSTOM_PORT_ATTR(mac_addr, "0x%lX\n", port->mac_addr);
+CUSTOM_PORT_ATTR(mac_addr, "0x%llX\n", port->mac_addr);
#define GET_PORT_ATTR(_name) (&veth_port_attr_##_name.attr)
static struct attribute *veth_port_default_attrs[] = {
#define KORINA_NUM_RDS 64 /* number of receive descriptors */
#define KORINA_NUM_TDS 64 /* number of transmit descriptors */
-#define KORINA_RBSIZE 536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE 1536 /* size of one resource buffer = Ether MTU */
#define KORINA_RDS_MASK (KORINA_NUM_RDS - 1)
#define KORINA_TDS_MASK (KORINA_NUM_TDS - 1)
#define RD_RING_SIZE (KORINA_NUM_RDS * sizeof(struct dma_desc))
struct korina_private *lp = netdev_priv(dev);
unsigned long flags;
u32 length;
- u32 chain_index;
+ u32 chain_prev, chain_next;
struct dma_desc *td;
spin_lock_irqsave(&lp->lock, flags);
/* Setup the transmit descriptor. */
dma_cache_inv((u32) td, sizeof(*td));
td->ca = CPHYSADDR(skb->data);
- chain_index = (lp->tx_chain_tail - 1) &
- KORINA_TDS_MASK;
+ chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+ chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
if (lp->tx_chain_status == desc_empty) {
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&lp->tx_dma_regs->dmandptr);
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Link to prev */
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
/* Link to prev */
- lp->td_ring[chain_index].link = CPHYSADDR(td);
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
/* Write to NDPTR */
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
&(lp->tx_dma_regs->dmandptr));
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
/* Move tail */
- lp->tx_chain_tail = chain_index;
+ lp->tx_chain_tail = chain_next;
lp->tx_chain_status = desc_filled;
- netif_stop_queue(dev);
} else {
/* Update tail */
td->control = DMA_COUNT(length) |
DMA_DESC_COF | DMA_DESC_IOF;
- lp->td_ring[chain_index].control &=
+ lp->td_ring[chain_prev].control &=
~DMA_DESC_COF;
- lp->td_ring[chain_index].link = CPHYSADDR(td);
- lp->tx_chain_tail = chain_index;
+ lp->td_ring[chain_prev].link = CPHYSADDR(td);
+ lp->tx_chain_tail = chain_next;
}
}
dma_cache_wback((u32) td, sizeof(*td));
dmas = readl(&lp->rx_dma_regs->dmas);
if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
- netif_rx_schedule_prep(&lp->napi);
-
dmasm = readl(&lp->rx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_DONE |
DMA_STAT_HALT | DMA_STAT_ERR),
&lp->rx_dma_regs->dmasm);
+ netif_rx_schedule(&lp->napi);
+
if (dmas & DMA_STAT_ERR)
printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
struct sk_buff *skb, *skb_new;
u8 *pkt_buf;
- u32 devcs, pkt_len, dmas, rx_free_desc;
+ u32 devcs, pkt_len, dmas;
int count;
dma_cache_inv((u32)rd, sizeof(*rd));
for (count = 0; count < limit; count++) {
+ skb = lp->rx_skb[lp->rx_next_done];
+ skb_new = NULL;
devcs = rd->devcs;
+ if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+ break;
+
/* Update statistics counters */
if (devcs & ETH_RX_CRC)
dev->stats.rx_crc_errors++;
* in Rc32434 (errata ref #077) */
dev->stats.rx_errors++;
dev->stats.rx_dropped++;
- }
-
- while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
- /* init the var. used for the later
- * operations within the while loop */
- skb_new = NULL;
+ } else if ((devcs & ETH_RX_ROK)) {
pkt_len = RCVPKT_LENGTH(devcs);
- skb = lp->rx_skb[lp->rx_next_done];
-
- if ((devcs & ETH_RX_ROK)) {
- /* must be the (first and) last
- * descriptor then */
- pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-
- /* invalidate the cache */
- dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-
- /* Malloc up new buffer. */
- skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-
- if (!skb_new)
- break;
- /* Do not count the CRC */
- skb_put(skb, pkt_len - 4);
- skb->protocol = eth_type_trans(skb, dev);
-
- /* Pass the packet to upper layers */
- netif_receive_skb(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pkt_len;
-
- /* Update the mcast stats */
- if (devcs & ETH_RX_MP)
- dev->stats.multicast++;
-
- lp->rx_skb[lp->rx_next_done] = skb_new;
- }
-
- rd->devcs = 0;
-
- /* Restore descriptor's curr_addr */
- if (skb_new)
- rd->ca = CPHYSADDR(skb_new->data);
- else
- rd->ca = CPHYSADDR(skb->data);
-
- rd->control = DMA_COUNT(KORINA_RBSIZE) |
- DMA_DESC_COD | DMA_DESC_IOD;
- lp->rd_ring[(lp->rx_next_done - 1) &
- KORINA_RDS_MASK].control &=
- ~DMA_DESC_COD;
-
- lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
- dma_cache_wback((u32)rd, sizeof(*rd));
- rd = &lp->rd_ring[lp->rx_next_done];
- writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+
+ /* must be the (first and) last
+ * descriptor then */
+ pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+ /* invalidate the cache */
+ dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+ /* Malloc up new buffer. */
+ skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+ if (!skb_new)
+ break;
+ /* Do not count the CRC */
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Pass the packet to upper layers */
+ netif_receive_skb(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ /* Update the mcast stats */
+ if (devcs & ETH_RX_MP)
+ dev->stats.multicast++;
+
+ lp->rx_skb[lp->rx_next_done] = skb_new;
}
+
+ rd->devcs = 0;
+
+ /* Restore descriptor's curr_addr */
+ if (skb_new)
+ rd->ca = CPHYSADDR(skb_new->data);
+ else
+ rd->ca = CPHYSADDR(skb->data);
+
+ rd->control = DMA_COUNT(KORINA_RBSIZE) |
+ DMA_DESC_COD | DMA_DESC_IOD;
+ lp->rd_ring[(lp->rx_next_done - 1) &
+ KORINA_RDS_MASK].control &=
+ ~DMA_DESC_COD;
+
+ lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+ dma_cache_wback((u32)rd, sizeof(*rd));
+ rd = &lp->rd_ring[lp->rx_next_done];
+ writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
}
dmas = readl(&lp->rx_dma_regs->dmas);
dmas = readl(&lp->tx_dma_regs->dmas);
if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
- korina_tx(dev);
-
dmasm = readl(&lp->tx_dma_regs->dmasm);
writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
&lp->tx_dma_regs->dmasm);
+ korina_tx(dev);
+
if (lp->tx_chain_status == desc_filled &&
(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
ret = korina_init(dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
* that handles the Done Finished
* Ovr and Und Events */
ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+ IRQF_DISABLED, "Korina ethernet Rx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
dev->name, lp->rx_irq);
goto err_release;
}
ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+ IRQF_DISABLED, "Korina ethernet Tx", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
dev->name, lp->tx_irq);
/* Install handler for overrun error. */
ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+ IRQF_DISABLED, "Ethernet Overflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
dev->name, lp->ovr_irq);
/* Install handler for underflow error. */
ret = request_irq(lp->und_irq, &korina_und_interrupt,
- IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+ IRQF_DISABLED, "Ethernet Underflow", dev);
if (ret < 0) {
printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
dev->name, lp->und_irq);
korina_free_ring(dev);
+ napi_disable(&lp->napi);
+
free_irq(lp->rx_irq, dev);
free_irq(lp->tx_irq, dev);
free_irq(lp->ovr_irq, dev);
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
- platform_set_drvdata(pdev, dev);
lp = netdev_priv(dev);
bif->dev = dev;
int i;
if (msi_x) {
- nreq = min(dev->caps.num_eqs - dev->caps.reserved_eqs,
- num_possible_cpus() + 1);
+ nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
+ num_possible_cpus() + 1);
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
goto no_msi;
#define netxen_set_cmd_desc_ctxid(cmd_desc, var) \
((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
-#define netxen_set_cmd_desc_flags(cmd_desc, val) \
- (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
- ~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
-#define netxen_set_cmd_desc_opcode(cmd_desc, val) \
- (cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
- ~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
-
-#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val) \
- (cmd_desc)->num_of_buffers_total_length = \
- ((cmd_desc)->num_of_buffers_total_length & \
- ~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
-#define netxen_set_cmd_desc_totallength(cmd_desc, val) \
- (cmd_desc)->num_of_buffers_total_length = \
- ((cmd_desc)->num_of_buffers_total_length & \
- ~cpu_to_le32((u32)0xffffff << 8)) | \
- cpu_to_le32(((val) & 0xffffff) << 8)
-
-#define netxen_get_cmd_desc_opcode(cmd_desc) \
- ((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
-#define netxen_get_cmd_desc_totallength(cmd_desc) \
- ((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
+#define netxen_set_tx_port(_desc, _port) \
+ (_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
+
+#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
+ (_desc)->flags_opcode = \
+ cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
+
+#define netxen_set_tx_frags_len(_desc, _frags, _len) \
+ (_desc)->num_of_buffers_total_length = \
+ cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
struct cmd_desc_type0 {
u8 tcp_hdr_offset; /* For LSO only */
NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
- NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+ NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
+ NETXEN_BRDTYPE_P3_10G_TP = 0x0080
} netxen_brdtype_t;
*/
struct netxen_skb_frag {
u64 dma;
- u32 length;
+ ulong length;
};
#define _netxen_set_bits(config_word, start, bits, val) {\
struct netxen_cmd_buffer {
struct sk_buff *skb;
struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
- u32 total_length;
- u32 mss;
- u16 port;
- u8 cmd;
- u8 frag_count;
- unsigned long time_stamp;
- u32 state;
+ u32 frag_count;
};
/* In rx_buffer, we do not need multiple fragments as is a single buffer */
u32 skb_size;
struct netxen_rx_buffer *rx_buf_arr; /* rx buffers for receive */
struct list_head free_list;
- int begin_alloc;
};
/*
*/
typedef struct {
- u64 host_phys_addr; /* Ring base addr */
- u32 ring_size; /* Ring entries */
- u16 msi_index;
- u16 rsvd; /* Padding */
+ __le64 host_phys_addr; /* Ring base addr */
+ __le32 ring_size; /* Ring entries */
+ __le16 msi_index;
+ __le16 rsvd; /* Padding */
} nx_hostrq_sds_ring_t;
typedef struct {
- u64 host_phys_addr; /* Ring base addr */
- u64 buff_size; /* Packet buffer size */
- u32 ring_size; /* Ring entries */
- u32 ring_kind; /* Class of ring */
+ __le64 host_phys_addr; /* Ring base addr */
+ __le64 buff_size; /* Packet buffer size */
+ __le32 ring_size; /* Ring entries */
+ __le32 ring_kind; /* Class of ring */
} nx_hostrq_rds_ring_t;
typedef struct {
- u64 host_rsp_dma_addr; /* Response dma'd here */
- u32 capabilities[4]; /* Flag bit vector */
- u32 host_int_crb_mode; /* Interrupt crb usage */
- u32 host_rds_crb_mode; /* RDS crb usage */
+ __le64 host_rsp_dma_addr; /* Response dma'd here */
+ __le32 capabilities[4]; /* Flag bit vector */
+ __le32 host_int_crb_mode; /* Interrupt crb usage */
+ __le32 host_rds_crb_mode; /* RDS crb usage */
/* These ring offsets are relative to data[0] below */
- u32 rds_ring_offset; /* Offset to RDS config */
- u32 sds_ring_offset; /* Offset to SDS config */
- u16 num_rds_rings; /* Count of RDS rings */
- u16 num_sds_rings; /* Count of SDS rings */
- u16 rsvd1; /* Padding */
- u16 rsvd2; /* Padding */
+ __le32 rds_ring_offset; /* Offset to RDS config */
+ __le32 sds_ring_offset; /* Offset to SDS config */
+ __le16 num_rds_rings; /* Count of RDS rings */
+ __le16 num_sds_rings; /* Count of SDS rings */
+ __le16 rsvd1; /* Padding */
+ __le16 rsvd2; /* Padding */
u8 reserved[128]; /* reserve space for future expansion*/
/* MUST BE 64-bit aligned.
The following is packed:
} nx_hostrq_rx_ctx_t;
typedef struct {
- u32 host_producer_crb; /* Crb to use */
- u32 rsvd1; /* Padding */
+ __le32 host_producer_crb; /* Crb to use */
+ __le32 rsvd1; /* Padding */
} nx_cardrsp_rds_ring_t;
typedef struct {
- u32 host_consumer_crb; /* Crb to use */
- u32 interrupt_crb; /* Crb to use */
+ __le32 host_consumer_crb; /* Crb to use */
+ __le32 interrupt_crb; /* Crb to use */
} nx_cardrsp_sds_ring_t;
typedef struct {
/* These ring offsets are relative to data[0] below */
- u32 rds_ring_offset; /* Offset to RDS config */
- u32 sds_ring_offset; /* Offset to SDS config */
- u32 host_ctx_state; /* Starting State */
- u32 num_fn_per_port; /* How many PCI fn share the port */
- u16 num_rds_rings; /* Count of RDS rings */
- u16 num_sds_rings; /* Count of SDS rings */
- u16 context_id; /* Handle for context */
+ __le32 rds_ring_offset; /* Offset to RDS config */
+ __le32 sds_ring_offset; /* Offset to SDS config */
+ __le32 host_ctx_state; /* Starting State */
+ __le32 num_fn_per_port; /* How many PCI fn share the port */
+ __le16 num_rds_rings; /* Count of RDS rings */
+ __le16 num_sds_rings; /* Count of SDS rings */
+ __le16 context_id; /* Handle for context */
u8 phys_port; /* Physical id of port */
u8 virt_port; /* Virtual/Logical id of port */
u8 reserved[128]; /* save space for future expansion */
*/
typedef struct {
- u64 host_phys_addr; /* Ring base addr */
- u32 ring_size; /* Ring entries */
- u32 rsvd; /* Padding */
+ __le64 host_phys_addr; /* Ring base addr */
+ __le32 ring_size; /* Ring entries */
+ __le32 rsvd; /* Padding */
} nx_hostrq_cds_ring_t;
typedef struct {
- u64 host_rsp_dma_addr; /* Response dma'd here */
- u64 cmd_cons_dma_addr; /* */
- u64 dummy_dma_addr; /* */
- u32 capabilities[4]; /* Flag bit vector */
- u32 host_int_crb_mode; /* Interrupt crb usage */
- u32 rsvd1; /* Padding */
- u16 rsvd2; /* Padding */
- u16 interrupt_ctl;
- u16 msi_index;
- u16 rsvd3; /* Padding */
+ __le64 host_rsp_dma_addr; /* Response dma'd here */
+ __le64 cmd_cons_dma_addr; /* */
+ __le64 dummy_dma_addr; /* */
+ __le32 capabilities[4]; /* Flag bit vector */
+ __le32 host_int_crb_mode; /* Interrupt crb usage */
+ __le32 rsvd1; /* Padding */
+ __le16 rsvd2; /* Padding */
+ __le16 interrupt_ctl;
+ __le16 msi_index;
+ __le16 rsvd3; /* Padding */
nx_hostrq_cds_ring_t cds_ring; /* Desc of cds ring */
u8 reserved[128]; /* future expansion */
} nx_hostrq_tx_ctx_t;
typedef struct {
- u32 host_producer_crb; /* Crb to use */
- u32 interrupt_crb; /* Crb to use */
+ __le32 host_producer_crb; /* Crb to use */
+ __le32 interrupt_crb; /* Crb to use */
} nx_cardrsp_cds_ring_t;
typedef struct {
- u32 host_ctx_state; /* Starting state */
- u16 context_id; /* Handle for context */
+ __le32 host_ctx_state; /* Starting state */
+ __le16 context_id; /* Handle for context */
u8 phys_port; /* Physical id of port */
u8 virt_port; /* Virtual/Logical id of port */
nx_cardrsp_cds_ring_t cds_ring; /* Card cds settings */
#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */
typedef struct {
- u64 qhdr;
- u64 req_hdr;
- u64 words[6];
+ __le64 qhdr;
+ __le64 req_hdr;
+ __le64 words[6];
} nx_nic_req_t;
typedef struct {
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_tso_check(struct netxen_adapter *adapter,
- struct cmd_desc_type0 *desc, struct sk_buff *skb);
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
void netxen_watchdog_task(struct work_struct *work);
void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
void netxen_p2_nic_set_multi(struct net_device *netdev);
void netxen_p3_nic_set_multi(struct net_device *netdev);
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
static u32
netxen_poll_rsp(struct netxen_adapter *adapter)
{
- u32 raw_rsp, rsp = NX_CDRP_RSP_OK;
+ u32 rsp = NX_CDRP_RSP_OK;
int timeout = 0;
do {
if (++timeout > NX_OS_CRB_RETRY_COUNT)
return NX_CDRP_RSP_TIMEOUT;
- netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET,
- &raw_rsp);
-
- rsp = le32_to_cpu(raw_rsp);
+ netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
} while (!NX_CDRP_IS_RSP(rsp));
return rsp;
if (netxen_api_lock(adapter))
return NX_RCODE_TIMEOUT;
- netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET,
- cpu_to_le32(signature));
+ netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
- netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET,
- cpu_to_le32(arg1));
+ netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
- netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET,
- cpu_to_le32(arg2));
+ netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
- netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET,
- cpu_to_le32(arg3));
+ netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
- cpu_to_le32(NX_CDRP_FORM_CMD(cmd)));
+ NX_CDRP_FORM_CMD(cmd));
rsp = netxen_poll_rsp(adapter);
rcode = NX_RCODE_TIMEOUT;
} else if (rsp == NX_CDRP_RSP_FAIL) {
netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
- rcode = le32_to_cpu(rcode);
printk(KERN_ERR "%s: failed card response code:0x%x\n",
netxen_nic_driver_name, rcode);
int i, nrds_rings, nsds_rings;
size_t rq_size, rsp_size;
- u32 cap, reg;
+ u32 cap, reg, val;
int err;
prq->num_rds_rings = cpu_to_le16(nrds_rings);
prq->num_sds_rings = cpu_to_le16(nsds_rings);
- prq->rds_ring_offset = 0;
- prq->sds_ring_offset = prq->rds_ring_offset +
+ prq->rds_ring_offset = cpu_to_le32(0);
+
+ val = le32_to_cpu(prq->rds_ring_offset) +
(sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+ prq->sds_ring_offset = cpu_to_le32(val);
- prq_rds = (nx_hostrq_rds_ring_t *)(prq->data + prq->rds_ring_offset);
+ prq_rds = (nx_hostrq_rds_ring_t *)(prq->data +
+ le32_to_cpu(prq->rds_ring_offset));
for (i = 0; i < nrds_rings; i++) {
prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
}
- prq_sds = (nx_hostrq_sds_ring_t *)(prq->data + prq->sds_ring_offset);
+ prq_sds = (nx_hostrq_sds_ring_t *)(prq->data +
+ le32_to_cpu(prq->sds_ring_offset));
prq_sds[0].host_phys_addr =
cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
prq_sds[0].ring_size = cpu_to_le32(adapter->max_rx_desc_count);
/* only one msix vector for now */
- prq_sds[0].msi_index = cpu_to_le32(0);
-
- /* now byteswap offsets */
- prq->rds_ring_offset = cpu_to_le32(prq->rds_ring_offset);
- prq->sds_ring_offset = cpu_to_le32(prq->sds_ring_offset);
+ prq_sds[0].msi_index = cpu_to_le16(0);
phys_addr = hostrq_phys_addr;
err = netxen_issue_cmd(adapter,
prsp_rds = ((nx_cardrsp_rds_ring_t *)
- &prsp->data[prsp->rds_ring_offset]);
+ &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]);
- for (i = 0; i < le32_to_cpu(prsp->num_rds_rings); i++) {
+ for (i = 0; i < le16_to_cpu(prsp->num_rds_rings); i++) {
rds_ring = &recv_ctx->rds_rings[i];
reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
}
prsp_sds = ((nx_cardrsp_sds_ring_t *)
- &prsp->data[prsp->sds_ring_offset]);
+ &prsp->data[le32_to_cpu(prsp->sds_ring_offset)]);
reg = le32_to_cpu(prsp_sds[0].host_consumer_crb);
recv_ctx->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
recv_ctx->context_id = le16_to_cpu(prsp->context_id);
- recv_ctx->virt_port = le16_to_cpu(prsp->virt_port);
+ recv_ctx->virt_port = prsp->virt_port;
out_free_rsp:
pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
ecmd->port = PORT_TP;
- if (netif_running(dev)) {
- ecmd->speed = adapter->link_speed;
- ecmd->duplex = adapter->link_duplex;
- ecmd->autoneg = adapter->link_autoneg;
- }
+ ecmd->speed = adapter->link_speed;
+ ecmd->duplex = adapter->link_duplex;
+ ecmd->autoneg = adapter->link_autoneg;
} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
u32 val;
} else
return -EIO;
- ecmd->phy_address = adapter->portnum;
+ ecmd->phy_address = adapter->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
switch ((netxen_brdtype_t) boardinfo->board_type) {
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
- case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+ case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
- case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_SFP_CT:
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+ ecmd->advertising |= ADVERTISED_TP;
+ ecmd->supported |= SUPPORTED_TP;
+ case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+ ecmd->advertising |=
+ (ADVERTISED_FIBRE | ADVERTISED_TP);
+ ecmd->port = PORT_FIBRE;
+ } else {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+ ecmd->advertising |=
+ (ADVERTISED_TP | ADVERTISED_Autoneg);
+ ecmd->port = PORT_TP;
+ }
+ break;
default:
printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
(netxen_brdtype_t) boardinfo->board_type);
i = 0;
+ netif_tx_lock_bh(adapter->netdev);
+
producer = adapter->cmd_producer;
do {
cmd_desc = &cmd_desc_arr[i];
pbuf = &adapter->cmd_buf_arr[producer];
- pbuf->mss = 0;
- pbuf->total_length = 0;
pbuf->skb = NULL;
- pbuf->cmd = 0;
pbuf->frag_count = 0;
- pbuf->port = 0;
/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
memcpy(&adapter->ahw.cmd_desc_head[producer],
netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
+ netif_tx_unlock_bh(adapter->netdev);
+
return 0;
}
{
struct netxen_adapter *adapter = netdev_priv(dev);
nx_nic_req_t req;
- nx_mac_req_t mac_req;
+ nx_mac_req_t *mac_req;
+ u64 word;
int rv;
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr |= (NX_NIC_REQUEST << 23);
- req.req_hdr |= NX_MAC_EVENT;
- req.req_hdr |= ((u64)adapter->portnum << 16);
- mac_req.op = op;
- memcpy(&mac_req.mac_addr, addr, 6);
- req.words[0] = cpu_to_le64(*(u64 *)&mac_req);
+ req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+ word = NX_MAC_EVENT | ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
+
+ mac_req = (nx_mac_req_t *)&req.words[0];
+ mac_req->op = op;
+ memcpy(mac_req->mac_addr, addr, 6);
rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
if (rv != 0) {
int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
{
nx_nic_req_t req;
+ u64 word;
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr |= (NX_HOST_REQUEST << 23);
- req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
- req.req_hdr |= ((u64)adapter->portnum << 16);
+ req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+ word = NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+ ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
+
req.words[0] = cpu_to_le64(mode);
return netxen_send_cmd_descs(adapter,
(struct cmd_desc_type0 *)&req, 1);
}
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
+{
+ nx_mac_list_t *cur, *next;
+
+ cur = adapter->mac_list;
+
+ while (cur) {
+ next = cur->next;
+ kfree(cur);
+ cur = next;
+ }
+}
+
#define NETXEN_CONFIG_INTR_COALESCE 3
/*
int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
{
nx_nic_req_t req;
+ u64 word;
int rv;
memset(&req, 0, sizeof(nx_nic_req_t));
- req.qhdr |= (NX_NIC_REQUEST << 23);
- req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
- req.req_hdr |= ((u64)adapter->portnum << 16);
+ req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+ word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+ req.req_hdr = cpu_to_le64(word);
memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
- mac_hi = cpu_to_le32(mac_hi);
- mac_lo = cpu_to_le32(mac_lo);
-
if (pci_func & 1)
- *mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+ *mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
else
- *mac = ((mac_lo) | ((u64)mac_hi << 32));
+ *mac = le64_to_cpu((u64)mac_lo | ((u64)mac_hi << 32));
return 0;
}
{
int i;
u32 data, size = 0;
- u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+ u32 flashaddr = NETXEN_BOOTLD_START;
size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
return -EIO;
- adapter->pci_mem_write(adapter, memaddr, &data, 4);
+ adapter->pci_mem_write(adapter, flashaddr, &data, 4);
flashaddr += 4;
- memaddr += 4;
- cond_resched();
}
msleep(1);
rv = -1;
}
- DPRINTK(INFO, "Discovered board type:0x%x ", boardinfo->board_type);
+ if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+ u32 gpio = netxen_nic_reg_read(adapter,
+ NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+ if ((gpio & 0x8000) == 0)
+ boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+ }
+
switch ((netxen_brdtype_t) boardinfo->board_type) {
case NETXEN_BRDTYPE_P2_SB35_4G:
adapter->ahw.board_type = NETXEN_NIC_GBE;
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
case NETXEN_BRDTYPE_P3_10G_XFP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
adapter->ahw.board_type = NETXEN_NIC_XGBE;
break;
case NETXEN_BRDTYPE_P1_BD:
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
-
adapter->ahw.board_type = NETXEN_NIC_GBE;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ adapter->ahw.board_type = (adapter->portnum < 2) ?
+ NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+ break;
default:
printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
boardinfo->board_type);
{
__u32 status;
__u32 autoneg;
- __u32 mode;
__u32 port_mode;
- netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
- if (netxen_get_niu_enable_ge(mode)) { /* Gb 10/100/1000 Mbps mode */
+ if (!netif_carrier_ok(adapter->netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = -1;
+ adapter->link_autoneg = AUTONEG_ENABLE;
+ return;
+ }
+ if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
adapter->hw_read_wx(adapter,
NETXEN_PORT_MODE_ADDR, &port_mode, 4);
if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
adapter->link_speed = SPEED_1000;
break;
default:
- adapter->link_speed = -1;
+ adapter->link_speed = 0;
break;
}
switch (netxen_get_phy_duplex(status)) {
goto link_down;
} else {
link_down:
- adapter->link_speed = -1;
+ adapter->link_speed = 0;
adapter->link_duplex = -1;
}
}
}
memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
INIT_LIST_HEAD(&rds_ring->free_list);
- rds_ring->begin_alloc = 0;
/*
* Now go through all of them, set reference handles
* and put them in the queues.
long timeout = 0;
long done = 0;
+ cond_resched();
+
while (done == 0) {
done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
done &= 2;
static int do_rom_fast_read(struct netxen_adapter *adapter,
int addr, int *valp)
{
- cond_resched();
-
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
- netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
- udelay(100); /* prevent bursting on CRB */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+ netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
if (netxen_wait_rom_done(adapter)) {
printk("Error waiting for rom done\n");
}
/* reset abyte_cnt and dummy_byte_cnt */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
- udelay(100); /* prevent bursting on CRB */
+ udelay(10);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
int addr, val;
- int i, init_delay = 0;
+ int i, n, init_delay = 0;
struct crb_addr_pair *buf;
- unsigned offset, n;
+ unsigned offset;
u32 off;
/* resetall */
+ rom_lock(adapter);
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
0xffffffff);
+ netxen_rom_unlock(adapter);
if (verbose) {
if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
- (n != 0xcafecafeUL) ||
+ (n != 0xcafecafe) ||
netxen_rom_fast_read(adapter, 4, &n) != 0) {
printk(KERN_ERR "%s: ERROR Reading crb_init area: "
"n: %08x\n", netxen_nic_driver_name, n);
/* do not reset PCI */
if (off == (ROMUSB_GLB + 0xbc))
continue;
+ if (off == (ROMUSB_GLB + 0xa8))
+ continue;
+ if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+ continue;
+ if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+ continue;
+ if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+ continue;
if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
buf[i].data = 0x1020;
/* skip the function enable register */
continue;
}
+ init_delay = 1;
/* After writing this register, HW needs time for CRB */
/* to quiet down (else crb_window returns 0xffffffff) */
if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
- init_delay = 1;
+ init_delay = 1000;
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* hold xdma in reset also */
buf[i].data = NETXEN_NIC_XDMA_RESET;
+ buf[i].data = 0x8000ff;
}
}
adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
- if (init_delay == 1) {
- msleep(1000);
- init_delay = 0;
- }
- msleep(1);
+ msleep(init_delay);
}
kfree(buf);
dev_kfree_skb_any(skb);
for (i = 0; i < nr_frags; i++) {
- index = frag_desc->frag_handles[i];
+ index = le16_to_cpu(frag_desc->frag_handles[i]);
skb = netxen_process_rxbuf(adapter,
rds_ring, index, cksum);
if (skb)
struct rcv_desc *pdesc;
struct netxen_rx_buffer *buffer;
int count = 0;
- int index = 0;
netxen_ctx_msg msg = 0;
dma_addr_t dma;
struct list_head *head;
rds_ring = &recv_ctx->rds_rings[ringid];
producer = rds_ring->producer;
- index = rds_ring->begin_alloc;
head = &rds_ring->free_list;
/* We can start writing rx descriptors into the phantom memory. */
skb = dev_alloc_skb(rds_ring->skb_size);
if (unlikely(!skb)) {
- rds_ring->begin_alloc = index;
break;
}
+ if (!adapter->ahw.cut_through)
+ skb_reserve(skb, 2);
+
+ dma = pci_map_single(pdev, skb->data,
+ rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, dma)) {
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ count++;
buffer = list_entry(head->next, struct netxen_rx_buffer, list);
list_del(&buffer->list);
- count++; /* now there should be no failure */
- pdesc = &rds_ring->desc_head[producer];
-
- if (!adapter->ahw.cut_through)
- skb_reserve(skb, 2);
- /* This will be setup when we receive the
- * buffer after it has been filled FSL TBD TBD
- * skb->dev = netdev;
- */
- dma = pci_map_single(pdev, skb->data, rds_ring->dma_size,
- PCI_DMA_FROMDEVICE);
- pdesc->addr_buffer = cpu_to_le64(dma);
buffer->skb = skb;
buffer->state = NETXEN_BUFFER_BUSY;
buffer->dma = dma;
+
/* make a rcv descriptor */
+ pdesc = &rds_ring->desc_head[producer];
+ pdesc->addr_buffer = cpu_to_le64(dma);
pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
- DPRINTK(INFO, "done writing descripter\n");
- producer =
- get_next_index(producer, rds_ring->max_rx_desc_count);
- index = get_next_index(index, rds_ring->max_rx_desc_count);
+
+ producer = get_next_index(producer, rds_ring->max_rx_desc_count);
}
/* if we did allocate buffers, then write the count to Phantom */
if (count) {
- rds_ring->begin_alloc = index;
rds_ring->producer = producer;
/* Window = 1 */
adapter->pci_write_normalize(adapter,
struct rcv_desc *pdesc;
struct netxen_rx_buffer *buffer;
int count = 0;
- int index = 0;
struct list_head *head;
+ dma_addr_t dma;
rds_ring = &recv_ctx->rds_rings[ringid];
producer = rds_ring->producer;
- index = rds_ring->begin_alloc;
head = &rds_ring->free_list;
/* We can start writing rx descriptors into the phantom memory. */
while (!list_empty(head)) {
skb = dev_alloc_skb(rds_ring->skb_size);
if (unlikely(!skb)) {
- rds_ring->begin_alloc = index;
break;
}
+ if (!adapter->ahw.cut_through)
+ skb_reserve(skb, 2);
+
+ dma = pci_map_single(pdev, skb->data,
+ rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(pdev, dma)) {
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ count++;
buffer = list_entry(head->next, struct netxen_rx_buffer, list);
list_del(&buffer->list);
- count++; /* now there should be no failure */
- pdesc = &rds_ring->desc_head[producer];
- if (!adapter->ahw.cut_through)
- skb_reserve(skb, 2);
buffer->skb = skb;
buffer->state = NETXEN_BUFFER_BUSY;
- buffer->dma = pci_map_single(pdev, skb->data,
- rds_ring->dma_size,
- PCI_DMA_FROMDEVICE);
+ buffer->dma = dma;
/* make a rcv descriptor */
+ pdesc = &rds_ring->desc_head[producer];
pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
pdesc->addr_buffer = cpu_to_le64(buffer->dma);
- producer =
- get_next_index(producer, rds_ring->max_rx_desc_count);
- index = get_next_index(index, rds_ring->max_rx_desc_count);
- buffer = &rds_ring->rx_buf_arr[index];
+
+ producer = get_next_index(producer, rds_ring->max_rx_desc_count);
}
/* if we did allocate buffers, then write the count to Phantom */
if (count) {
- rds_ring->begin_alloc = index;
rds_ring->producer = producer;
/* Window = 1 */
adapter->pci_write_normalize(adapter,
#include "netxen_nic_phan_reg.h"
#include <linux/dma-mapping.h>
+#include <linux/if_vlan.h>
#include <net/ip.h>
+#include <linux/ipv6.h>
MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
MODULE_LICENSE("GPL");
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
adapter->msix_supported = !!use_msi_x;
- adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
break;
case NETXEN_BRDTYPE_P2_SB35_4G:
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ adapter->msix_supported = !!use_msi_x;
+ if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+ else
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+ break;
+
default:
adapter->msix_supported = 0;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
static int
netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
{
- int ret = 0;
+ u32 val, timeout;
if (first_boot == 0x55555555) {
/* This is the first boot after power up */
+ adapter->pci_write_normalize(adapter,
+ NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+
+ if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 0;
/* PCI bus master workaround */
adapter->hw_read_wx(adapter,
/* clear the register for future unloads/loads */
adapter->pci_write_normalize(adapter,
NETXEN_CAM_RAM(0x1fc), 0);
- ret = -1;
+ return -EIO;
}
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- /* Start P2 boot loader */
- adapter->pci_write_normalize(adapter,
- NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
- adapter->pci_write_normalize(adapter,
- NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
- }
+ /* Start P2 boot loader */
+ val = adapter->pci_read_normalize(adapter,
+ NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+ adapter->pci_write_normalize(adapter,
+ NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+ timeout = 0;
+ do {
+ msleep(1);
+ val = adapter->pci_read_normalize(adapter,
+ NETXEN_CAM_RAM(0x1fc));
+
+ if (++timeout > 5000)
+ return -EIO;
+
+ } while (val == NETXEN_BDINFO_MAGIC);
}
- return ret;
+ return 0;
}
static void netxen_set_port_mode(struct netxen_adapter *adapter)
CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
msleep(1);
- netxen_load_firmware(adapter);
}
+ netxen_load_firmware(adapter);
if (NX_IS_REVISION_P3(revision_id))
netxen_pcie_strap_init(adapter);
}
- if ((first_boot == 0x55555555) &&
- (NX_IS_REVISION_P2(revision_id))) {
- /* Unlock the HW, prompting the boot sequence */
- adapter->pci_write_normalize(adapter,
- NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
- }
-
err = netxen_initialize_adapter_offload(adapter);
if (err)
goto err_out_iounmap;
adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
/* Handshake with the card before we register the devices. */
- netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+ err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+ if (err)
+ goto err_out_free_offload;
} /* first_driver */
if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
pci_disable_msi(pdev);
+err_out_free_offload:
if (first_driver)
netxen_free_adapter_offload(adapter);
netxen_free_hw_resources(adapter);
netxen_release_rx_buffers(adapter);
netxen_free_sw_resources(adapter);
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ netxen_p3_free_mac_list(adapter);
}
if (adapter->portnum == 0)
iounmap(adapter->ahw.db_base);
iounmap(adapter->ahw.pci_base0);
- iounmap(adapter->ahw.pci_base1);
- iounmap(adapter->ahw.pci_base2);
+ if (adapter->ahw.pci_base1 != NULL)
+ iounmap(adapter->ahw.pci_base1);
+ if (adapter->ahw.pci_base2 != NULL)
+ iounmap(adapter->ahw.pci_base2);
pci_release_regions(pdev);
pci_disable_device(pdev);
return 0;
}
-void netxen_tso_check(struct netxen_adapter *adapter,
+static bool netxen_tso_check(struct net_device *netdev,
struct cmd_desc_type0 *desc, struct sk_buff *skb)
{
- if (desc->mss) {
- desc->total_hdr_length = (sizeof(struct ethhdr) +
- ip_hdrlen(skb) + tcp_hdrlen(skb));
+ bool tso = false;
+ u8 opcode = TX_ETHER_PKT;
- if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
- (skb->protocol == htons(ETH_P_IPV6)))
- netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
- else
- netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
+ if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+ skb_shinfo(skb)->gso_size > 0) {
+
+ desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+ desc->total_hdr_length =
+ skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+ opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+ TX_TCP_LSO6 : TX_TCP_LSO;
+ tso = true;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
- else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
- netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
- else
- return;
+ u8 l4proto;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ l4proto = ip_hdr(skb)->protocol;
+
+ if (l4proto == IPPROTO_TCP)
+ opcode = TX_TCP_PKT;
+ else if(l4proto == IPPROTO_UDP)
+ opcode = TX_UDP_PKT;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ l4proto = ipv6_hdr(skb)->nexthdr;
+
+ if (l4proto == IPPROTO_TCP)
+ opcode = TX_TCPV6_PKT;
+ else if(l4proto == IPPROTO_UDP)
+ opcode = TX_UDPV6_PKT;
+ }
}
desc->tcp_hdr_offset = skb_transport_offset(skb);
desc->ip_hdr_offset = skb_network_offset(skb);
+ netxen_set_tx_flags_opcode(desc, 0, opcode);
+ return tso;
+}
+
+static void
+netxen_clean_tx_dma_mapping(struct pci_dev *pdev,
+ struct netxen_cmd_buffer *pbuf, int last)
+{
+ int k;
+ struct netxen_skb_frag *buffrag;
+
+ buffrag = &pbuf->frag_array[0];
+ pci_unmap_single(pdev, buffrag->dma,
+ buffrag->length, PCI_DMA_TODEVICE);
+
+ for (k = 1; k < last; k++) {
+ buffrag = &pbuf->frag_array[k];
+ pci_unmap_page(pdev, buffrag->dma,
+ buffrag->length, PCI_DMA_TODEVICE);
+ }
}
static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
struct netxen_adapter *adapter = netdev_priv(netdev);
struct netxen_hardware_context *hw = &adapter->ahw;
unsigned int first_seg_len = skb->len - skb->data_len;
+ struct netxen_cmd_buffer *pbuf;
struct netxen_skb_frag *buffrag;
- unsigned int i;
+ struct cmd_desc_type0 *hwdesc;
+ struct pci_dev *pdev = adapter->pdev;
+ dma_addr_t temp_dma;
+ int i, k;
u32 producer, consumer;
- u32 saved_producer = 0;
- struct cmd_desc_type0 *hwdesc;
- int k;
- struct netxen_cmd_buffer *pbuf = NULL;
- int frag_count;
- int no_of_desc;
+ int frag_count, no_of_desc;
u32 num_txd = adapter->max_tx_desc_count;
+ bool is_tso = false;
frag_count = skb_shinfo(skb)->nr_frags + 1;
/* There 4 fragments per descriptor */
no_of_desc = (frag_count + 3) >> 2;
- if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
- if (skb_shinfo(skb)->gso_size > 0) {
-
- no_of_desc++;
- if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
- sizeof(struct ethhdr)) >
- (sizeof(struct cmd_desc_type0) - 2)) {
- no_of_desc++;
- }
- }
- }
producer = adapter->cmd_producer;
smp_mb();
}
/* Copy the descriptors into the hardware */
- saved_producer = producer;
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
/* Take skb->data itself */
pbuf = &adapter->cmd_buf_arr[producer];
- if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
- skb_shinfo(skb)->gso_size > 0) {
- pbuf->mss = skb_shinfo(skb)->gso_size;
- hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
- } else {
- pbuf->mss = 0;
- hwdesc->mss = 0;
- }
- pbuf->total_length = skb->len;
+
+ is_tso = netxen_tso_check(netdev, hwdesc, skb);
+
pbuf->skb = skb;
- pbuf->cmd = TX_ETHER_PKT;
pbuf->frag_count = frag_count;
- pbuf->port = adapter->portnum;
buffrag = &pbuf->frag_array[0];
- buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
+ temp_dma = pci_map_single(pdev, skb->data, first_seg_len,
PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, temp_dma))
+ goto drop_packet;
+
+ buffrag->dma = temp_dma;
buffrag->length = first_seg_len;
- netxen_set_cmd_desc_totallength(hwdesc, skb->len);
- netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
- netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
+ netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
+ netxen_set_tx_port(hwdesc, adapter->portnum);
- netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
- netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
struct skb_frag_struct *frag;
int len, temp_len;
unsigned long offset;
- dma_addr_t temp_dma;
/* move to next desc. if there is a need */
if ((i & 0x3) == 0) {
offset = frag->page_offset;
temp_len = len;
- temp_dma = pci_map_page(adapter->pdev, frag->page, offset,
+ temp_dma = pci_map_page(pdev, frag->page, offset,
len, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, temp_dma)) {
+ netxen_clean_tx_dma_mapping(pdev, pbuf, i);
+ goto drop_packet;
+ }
buffrag++;
buffrag->dma = temp_dma;
}
producer = get_next_index(producer, num_txd);
- /* might change opcode to TX_TCP_LSO */
- netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
-
/* For LSO, we need to copy the MAC/IP/TCP headers into
* the descriptor ring
*/
- if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
- == TX_TCP_LSO) {
+ if (is_tso) {
int hdr_len, first_hdr_len, more_hdr;
- hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
more_hdr = 1;
netdev->trans_start = jiffies;
return NETDEV_TX_OK;
+
+drop_packet:
+ adapter->stats.txdropped++;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
}
static int netxen_nic_check_temp(struct netxen_adapter *adapter)
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
+
+ netxen_nic_set_link_parameters(adapter);
} else if (!adapter->ahw.linkup && linkup) {
printk(KERN_INFO "%s: %s NIC Link is up\n",
netxen_nic_driver_name, netdev->name);
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
+
+ netxen_nic_set_link_parameters(adapter);
}
}
rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
ccmdsta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno));
- printk(KERN_ERR "pasemi_mac: rx error. macrx %016lx, rx status %lx\n",
+ printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
macrx, *chan->status);
printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
cmdsta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno));
- printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016lx, "\
- "tx status 0x%016lx\n", mactx, *chan->status);
+ printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
+ "tx status 0x%016llx\n", mactx, *chan->status);
printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
}
if ((phy_id & 0x1fffffff) == 0x1fffffff)
return NULL;
- /*
- * Broken hardware is sometimes missing the pull-up resistor on the
- * MDIO line, which results in reads to non-existent devices returning
- * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
- * device as well.
- */
- if (phy_id == 0)
- return NULL;
-
dev = phy_device_create(bus, addr, phy_id);
return dev;
static int ppp_disconnect_channel(struct channel *pch);
static void ppp_destroy_channel(struct channel *pch);
static int unit_get(struct idr *p, void *ptr);
+static int unit_set(struct idr *p, void *ptr, int n);
static void unit_put(struct idr *p, int n);
static void *unit_find(struct idr *p, int n);
} else {
if (unit_find(&ppp_units_idr, unit))
goto out2; /* unit already exists */
- else {
- /* darn, someone is cheating us? */
- *retp = -EINVAL;
+ /*
+ * if caller need a specified unit number
+ * lets try to satisfy him, otherwise --
+ * he should better ask us for new unit number
+ *
+ * NOTE: yes I know that returning EEXIST it's not
+ * fair but at least pppd will ask us to allocate
+ * new unit in this case so user is happy :)
+ */
+ unit = unit_set(&ppp_units_idr, ppp, unit);
+ if (unit < 0)
goto out2;
- }
}
/* Initialize the new ppp unit */
* by holding all_ppp_mutex
*/
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+ int unit, err;
+
+again:
+ if (!idr_pre_get(p, GFP_KERNEL)) {
+ printk(KERN_ERR "PPP: No free memory for idr\n");
+ return -ENOMEM;
+ }
+
+ err = idr_get_new_above(p, ptr, n, &unit);
+ if (err == -EAGAIN)
+ goto again;
+
+ if (unit != n) {
+ idr_remove(p, unit);
+ return -EINVAL;
+ }
+
+ return unit;
+}
+
/* get new free unit number and associate pointer with it */
static int unit_get(struct idr *p, void *ptr)
{
int unit, err;
again:
- if (idr_pre_get(p, GFP_KERNEL) == 0) {
- printk(KERN_ERR "Out of memory expanding drawable idr\n");
+ if (!idr_pre_get(p, GFP_KERNEL)) {
+ printk(KERN_ERR "PPP: No free memory for idr\n");
return -ENOMEM;
}
else
ret = sis900_get_mac_addr(pci_dev, net_dev);
- if (ret == 0) {
- printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
- ret = -ENODEV;
- goto err_unmap_rx;
+ if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) {
+ random_ether_addr(net_dev->dev_addr);
+ printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
+ "using random generated one\n", dev_name);
}
/* 630ET : set the mii access mode as software-mode */
/* setup */
spin_lock_irq(&serial->serial_lock);
tty->driver_data = serial;
+ tty_kref_put(serial->tty);
serial->tty = tty_kref_get(tty);
spin_unlock_irq(&serial->serial_lock);
/* initialize */
ctrl_req->wValue = 0;
- ctrl_req->wIndex = hso_port_to_mux(port);
- ctrl_req->wLength = size;
+ ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+ ctrl_req->wLength = cpu_to_le16(size);
if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
/* Reading command */
return -2;
}
- spin_lock(&serial->serial_lock);
+ /* All callers to put_rxbuf_data hold serial_lock */
tty = tty_kref_get(serial->tty);
- spin_unlock(&serial->serial_lock);
/* Push data to tty */
if (tty) {
serial->curr_rx_urb_offset;
D1("data to push to tty");
while (write_length_remaining) {
- if (test_bit(TTY_THROTTLED, &tty->flags))
+ if (test_bit(TTY_THROTTLED, &tty->flags)) {
+ tty_kref_put(tty);
return -1;
+ }
curr_write_len = tty_insert_flip_string
(tty, urb->transfer_buffer +
serial->curr_rx_urb_offset,
printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
#endif
qmgr_disable_irq(queue_ids[port->id].rx);
- netif_rx_schedule(dev, &port->napi);
+ netif_rx_schedule(&port->napi);
}
static int hss_hdlc_poll(struct napi_struct *napi, int budget)
printk(KERN_DEBUG "%s: hss_hdlc_poll"
" netif_rx_complete\n", dev->name);
#endif
- netif_rx_complete(dev, napi);
+ netif_rx_complete(napi);
qmgr_enable_irq(rxq);
if (!qmgr_stat_empty(rxq) &&
netif_rx_reschedule(napi)) {
hss_start_hdlc(port);
/* we may already have RX data, enables IRQ */
- netif_rx_schedule(dev, &port->napi);
+ netif_rx_schedule(&port->napi);
return 0;
err_unlock:
lets you choose drivers.
config PCMCIA_RAYCS
- tristate "Aviator/Raytheon 2.4MHz wireless support"
+ tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA && WLAN_80211
select WIRELESS_EXT
---help---
if (skb_headroom(skb) < padsize) {
ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
" headroom to pad %d\n", hdrlen, padsize);
- return -1;
+ return NETDEV_TX_BUSY;
}
skb_push(skb, padsize);
memmove(skb->data, skb->data+padsize, hdrlen);
ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
spin_unlock_irqrestore(&sc->txbuflock, flags);
ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
- return -1;
+ return NETDEV_TX_BUSY;
}
bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
list_del(&bf->list);
sc->txbuf_len++;
spin_unlock_irqrestore(&sc->txbuflock, flags);
dev_kfree_skb_any(skb);
- return 0;
+ return NETDEV_TX_OK;
}
- return 0;
+ return NETDEV_TX_OK;
}
static int
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
- AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
break;
case NL80211_IFTYPE_AP:
if (ah->ah_version == AR5K_AR5210)
pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
else
- AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
break;
case NL80211_IFTYPE_STATION:
#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */
#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */
#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */
-#define AR5K_CFG_ADHOC 0x00000020 /* AP/Adhoc indication [5211+] */
+#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */
#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */
#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */
config ATH9K
tristate "Atheros 802.11n wireless cards support"
depends on PCI && MAC80211 && WLAN_80211
+ depends on RFKILL || RFKILL=n
select MAC80211_LEDS
select LEDS_CLASS
select NEW_LEDS
conf->ht.channel_type);
}
+ ath_update_chainmask(sc, conf->ht.enabled);
+
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
return -EINVAL;
}
-
- ath_update_chainmask(sc, conf->ht.enabled);
}
if (changed & IEEE80211_CONF_CHANGE_POWER)
tx_info->flags |= IEEE80211_TX_STAT_ACK;
}
- tx_info->status.rates[0].count = tx_status->retries;
- if (tx_info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
- /* Change idx from internal table index to MCS index */
- int idx = tx_info->status.rates[0].idx;
- struct ath_rate_table *rate_table = sc->cur_rate_table;
- if (idx >= 0 && idx < rate_table->rate_cnt)
- tx_info->status.rates[0].idx =
- rate_table->info[idx].ratecode & 0x7f;
- }
+ tx_info->status.rates[0].count = tx_status->retries + 1;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
padsize = hdrlen & 3;
}
/* Get seqno */
-
- if (ieee80211_is_data(fc) && !is_pae(skb)) {
- /* For HT capable stations, we save tidno for later use.
- * We also override seqno set by upper layer with the one
- * in tx aggregation state.
- *
- * If fragmentation is on, the sequence number is
- * not overridden, since it has been
- * incremented by the fragmentation routine.
- *
- * FIXME: check if the fragmentation threshold exceeds
- * IEEE80211 max.
- */
- tid = ATH_AN_2_TID(an, bf->bf_tidno);
- hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
- IEEE80211_SEQ_SEQ_SHIFT);
- bf->bf_seqno = tid->seq_next;
- INCR(tid->seq_next, IEEE80211_SEQ_MAX);
- }
+ /* For HT capable stations, we save tidno for later use.
+ * We also override seqno set by upper layer with the one
+ * in tx aggregation state.
+ *
+ * If fragmentation is on, the sequence number is
+ * not overridden, since it has been
+ * incremented by the fragmentation routine.
+ *
+ * FIXME: check if the fragmentation threshold exceeds
+ * IEEE80211 max.
+ */
+ tid = ATH_AN_2_TID(an, bf->bf_tidno);
+ hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+ IEEE80211_SEQ_SEQ_SHIFT);
+ bf->bf_seqno = tid->seq_next;
+ INCR(tid->seq_next, IEEE80211_SEQ_MAX);
}
static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
/* Assign seqno, tidno */
- if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR))
+ if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR))
assign_aggr_tid_seqno(skb, bf);
/* DMA setup */
-
bf->bf_mpdu = skb;
bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data,
struct b43_wldev *down_dev;
struct b43_wldev *d;
int err;
- bool gmode;
+ bool uninitialized_var(gmode);
int prev_status;
/* Find a device and PHY which supports the band. */
static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
unsigned int new_mode)
{
- struct b43legacy_wldev *up_dev;
+ struct b43legacy_wldev *uninitialized_var(up_dev);
struct b43legacy_wldev *down_dev;
int err;
bool gmode = 0;
/* set tx power value for all OFDM rates */
for (rate_index = 0; rate_index < IWL_OFDM_RATES;
rate_index++) {
- s32 power_idx;
+ s32 uninitialized_var(power_idx);
int rc;
/* use channel group's clip-power table,
* 0x3) 54 Mbps
*
* Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- * 3-0: 10) 1 Mbps
+ * 6-0: 10) 1 Mbps
* 20) 2 Mbps
* 55) 5.5 Mbps
* 110) 11 Mbps
IWL_CMD(REPLY_REMOVE_STA);
IWL_CMD(REPLY_REMOVE_ALL_STA);
IWL_CMD(REPLY_WEPKEY);
+ IWL_CMD(REPLY_3945_RX);
IWL_CMD(REPLY_TX);
IWL_CMD(REPLY_RATE_SCALE);
IWL_CMD(REPLY_LEDS_CMD);
* there are no buffered multicast frames to send
*/
ieee80211_stop_queues(priv->hw);
- return 0;
+ return NETDEV_TX_OK;
}
static void lbtf_tx_work(struct work_struct *work)
struct orinoco_rx_data *rx_data, *temp;
struct hermes_rx_descriptor *desc;
struct sk_buff *skb;
+ unsigned long flags;
+
+ /* orinoco_rx requires the driver lock, and we also need to
+ * protect priv->rx_list, so just hold the lock over the
+ * lot.
+ *
+ * If orinoco_lock fails, we've unplugged the card. In this
+ * case just abort. */
+ if (orinoco_lock(priv, &flags) != 0)
+ return;
/* extract desc and skb from queue */
list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
kfree(desc);
}
+
+ orinoco_unlock(priv, &flags);
}
/********************************************************************/
void free_orinocodev(struct net_device *dev)
{
struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_rx_data *rx_data, *temp;
- /* No need to empty priv->rx_list: if the tasklet is scheduled
- * when we call tasklet_kill it will run one final time,
- * emptying the list */
+ /* If the tasklet is scheduled when we call tasklet_kill it
+ * will run one final time. However the tasklet will only
+ * drain priv->rx_list if the hw is still available. */
tasklet_kill(&priv->rx_tasklet);
+ /* Explicitly drain priv->rx_list */
+ list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+ list_del(&rx_data->list);
+
+ dev_kfree_skb(rx_data->skb);
+ kfree(rx_data->desc);
+ kfree(rx_data);
+ }
+
unregister_pm_notifier(&priv->pm_notifier);
orinoco_uncache_fw(priv);
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+ PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
u8 *fw_version = NULL;
size_t len;
int i;
+ int maxlen;
if (priv->rx_start)
return 0;
else
priv->rx_mtu = (size_t)
0x620 - priv->tx_hdr_len;
+ maxlen = priv->tx_hdr_len + /* USB devices */
+ sizeof(struct p54_rx_data) +
+ 4 + /* rx alignment */
+ IEEE80211_MAX_FRAG_THRESHOLD;
+ if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
+ printk(KERN_INFO "p54: rx_mtu reduced from %d "
+ "to %d\n", priv->rx_mtu,
+ maxlen);
+ priv->rx_mtu = maxlen;
+ }
break;
}
case BR_CODE_EXPOSED_IF:
u16 freq = le16_to_cpu(hdr->freq);
size_t header_len = sizeof(*hdr);
u32 tsf32;
+ u8 rate = hdr->rate & 0xf;
/*
* If the device is in a unspecified state we have to
rx_status.qual = (100 * hdr->rssi) / 127;
if (hdr->rate & 0x10)
rx_status.flag |= RX_FLAG_SHORTPRE;
- rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ?
- hdr->rate : (hdr->rate - 4)) & 0xf;
+ if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+ rx_status.rate_idx = (rate < 4) ? 0 : rate - 4;
+ else
+ rx_status.rate_idx = rate;
+
rx_status.freq = freq;
rx_status.band = dev->conf.channel->band;
rx_status.antenna = hdr->antenna;
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
info->status.ack_signal = p54_rssi_to_dbm(dev,
(int)payload->ack_rssi);
+
+ if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+ u8 *iv = (u8 *)(entry_data->align + pad +
+ entry_data->crypt_offset);
+
+ /* Restore the original TKIP IV. */
+ iv[2] = iv[0];
+ iv[0] = iv[1];
+ iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */
+ }
skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
ieee80211_tx_status_irqsafe(dev, entry);
goto out;
hdr->tries = ridx;
txhdr->rts_rate_idx = 0;
if (info->control.hw_key) {
- crypt_offset += info->control.hw_key->iv_len;
txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
}
/* reserve some space for ICV */
len += info->control.hw_key->icv_len;
+ memset(skb_put(skb, info->control.hw_key->icv_len), 0,
+ info->control.hw_key->icv_len);
} else {
txhdr->key_type = 0;
txhdr->key_len = 0;
static int p54_config(struct ieee80211_hw *dev, u32 changed)
{
- int ret;
+ int ret = 0;
struct p54_common *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
usb_fill_bulk_urb(data_urb, priv->udev,
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
skb->data, skb->len, p54u_tx_cb, skb);
+ data_urb->transfer_flags |= URB_ZERO_PACKET;
usb_anchor_urb(data_urb, &priv->submitted);
if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
/*
* Allow hardware encryption to be disabled.
*/
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
/*
* The driver does not support the IV/EIV generation
- * in hardware. However it doesn't support the IV/EIV
- * inside the ieee80211 frame either, but requires it
- * to be provided seperately for the descriptor.
- * rt2x00lib will cut the IV/EIV data out of all frames
- * given to us by mac80211, but we must tell mac80211
+ * in hardware. However it demands the data to be provided
+ * both seperately as well as inside the frame.
+ * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+ * to ensure rt2x00lib will not strip the data from the
+ * frame after the copy, now we must tell mac80211
* to generate the IV/EIV data.
*/
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
- rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
rt2x00_desc_write(txd, 0, word);
}
/* ICV is located at the end of frame */
- /*
- * Hardware has stripped IV/EIV data from 802.11 frame during
- * decryption. It has provided the data seperately but rt2x00lib
- * should decide if it should be reinserted.
- */
- rxdesc->flags |= RX_FLAG_IV_STRIPPED;
- if (rxdesc->cipher != CIPHER_TKIP)
- rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
rxdesc->flags |= RX_FLAG_DECRYPTED;
else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
{
entry->flags = 0;
entry->bitrate = rate->bitrate;
- entry->hw_value = rt2x00_create_rate_hw_value(index, 0);
- entry->hw_value_short = entry->hw_value;
+ entry->hw_value =index;
+ entry->hw_value_short = index;
- if (rate->flags & DEV_RATE_SHORT_PREAMBLE) {
+ if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
- entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1);
- }
}
static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled)
{
- if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC)
+ if (rt2x00dev->led_radio.type == LED_TYPE_RADIO)
rt2x00led_led_simple(&rt2x00dev->led_radio, enabled);
}
extern const struct rt2x00_rate rt2x00_supported_rates[12];
-static inline u16 rt2x00_create_rate_hw_value(const u16 index,
- const u16 short_preamble)
-{
- return (short_preamble << 8) | (index & 0xff);
-}
-
static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
{
return &rt2x00_supported_rates[hw_value & 0xff];
}
-static inline int rt2x00_get_rate_preamble(const u16 hw_value)
-{
- return (hw_value & 0xff00);
-}
-
/*
* Radio control handlers.
*/
* When preamble is enabled we should set the
* preamble bit for the signal.
*/
- if (rt2x00_get_rate_preamble(rate->hw_value))
+ if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
txdesc->signal |= 0x08;
}
}
if (usb_endpoint_is_bulk_in(ep_desc)) {
rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc);
- } else if (usb_endpoint_is_bulk_out(ep_desc)) {
+ } else if (usb_endpoint_is_bulk_out(ep_desc) &&
+ (queue != queue_end(rt2x00dev))) {
rt2x00usb_assign_endpoint(queue, ep_desc);
+ queue = queue_next(queue);
- if (queue != queue_end(rt2x00dev))
- queue = queue_next(queue);
tx_ep_desc = ep_desc;
}
}
/* Linksys */
{ USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
/* MSI */
{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->queues = 1;
dev->max_signal = 65;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
kfree_skb(skb);
- return -ENOMEM;
+ return NETDEV_TX_OK;
}
flags = skb->len;
}
usb_free_urb(urb);
- return rc;
+ return NETDEV_TX_OK;
}
static void rtl8187_rx_cb(struct urb *urb)
ieee80211_unregister_hw(dev);
priv = dev->priv;
+ usb_reset_device(priv->udev);
usb_put_dev(interface_to_usbdev(intf));
ieee80211_free_hw(dev);
}
}
EXPORT_SYMBOL(of_register_i2c_devices);
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return dev_archdata_get_node(&dev->archdata) == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, node,
+ of_dev_node_match);
+ if (!dev)
+ return NULL;
+
+ return to_i2c_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
MODULE_LICENSE("GPL");
serial_port.type = PORT_16550A;
serial_port.uartclk = 115200*16;
serial_port.fifosize = 16;
- spin_lock_init(&serial_port.lock);
/* serial port #1 */
serial_port.iobase = sio_dev.sp1_base;
int found = acpi_pci_detect_ejectable(pbus);
if (!found) {
acpi_handle bridge_handle = acpi_pci_get_bridge_handle(pbus);
+ if (!bridge_handle)
+ return 0;
acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
is_pci_dock_device, (void *)&found, NULL);
}
continue;
for (i = 0; i < drhd->devices_cnt; i++)
- if (drhd->devices[i]->bus->number == bus &&
+ if (drhd->devices[i] &&
+ drhd->devices[i]->bus->number == bus &&
drhd->devices[i]->devfn == devfn)
return drhd->iommu;
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
if (!pm)
- goto Exit;
-
+ return;
/* Check device's ability to generate PME# */
pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
pmc & PCI_PM_CAP_VER_MASK);
- goto Exit;
+ return;
}
dev->pm_cap = pm;
} else {
dev->pme_support = 0;
}
-
- Exit:
- pci_update_current_state(dev, PCI_D0);
}
/**
#include <asm/uaccess.h>
#include "pci.h"
-asmlinkage long
-sys_pciconfig_read(unsigned long bus, unsigned long dfn,
- unsigned long off, unsigned long len,
- void __user *buf)
+SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
+ unsigned long, off, unsigned long, len, void __user *, buf)
{
struct pci_dev *dev;
u8 byte;
return err;
}
-asmlinkage long
-sys_pciconfig_write(unsigned long bus, unsigned long dfn,
- unsigned long off, unsigned long len,
- void __user *buf)
+SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+ unsigned long, off, unsigned long, len, void __user *, buf)
{
struct pci_dev *dev;
u8 byte;
goto fail3;
}
- dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+ dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n",
cf->mem_phys, io.start, cf->irq);
cf->active = 1;
If you have an ACPI-compatible ASUS laptop, say Y or M here.
+config DELL_LAPTOP
+ tristate "Dell Laptop Extras (EXPERIMENTAL)"
+ depends on X86
+ depends on DCDBAS
+ depends on EXPERIMENTAL
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on RFKILL
+ default n
+ ---help---
+ This driver adds support for rfkill and backlight control to Dell
+ laptops.
+
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on ACPI
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+config THINKPAD_ACPI_DEBUGFACILITIES
+ bool "Maintainer debug facilities"
+ depends on THINKPAD_ACPI
+ default n
+ ---help---
+ Enables extra stuff in the thinkpad-acpi which is completely useless
+ for normal use. Read the driver source to find out what it does.
+
+ Say N here, unless you were told by a kernel maintainer to do
+ otherwise.
+
config THINKPAD_ACPI_DEBUG
bool "Verbose debug mode"
depends on THINKPAD_ACPI
obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
+obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_ACER_WMI) += acer-wmi.o
obj-$(CONFIG_HP_WMI) += hp-wmi.o
obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
#include <linux/rfkill.h>
#include <linux/power_supply.h>
#include <linux/acpi.h>
-#include "../firmware/dcdbas.h"
+#include "../../firmware/dcdbas.h"
#define BRIGHTNESS_TOKEN 0x7d
};
static const char *cm_getv[] = {
- "WLDG", NULL, NULL, NULL,
+ "WLDG", "BTHG", NULL, NULL,
"CAMG", NULL, NULL, NULL,
NULL, "PBLG", NULL, NULL,
"CFVG", NULL, NULL, NULL,
};
static const char *cm_setv[] = {
- "WLDS", NULL, NULL, NULL,
+ "WLDS", "BTHS", NULL, NULL,
"CAMS", NULL, NULL, NULL,
"SDSP", "PBLS", "HDPS", NULL,
"CFVS", NULL, NULL, NULL,
* 02110-1301, USA.
*/
-#define TPACPI_VERSION "0.21"
+#define TPACPI_VERSION "0.22"
#define TPACPI_SYSFS_VERSION 0x020200
/*
#define TPACPI_HKEY_INPUT_PRODUCT 0x5054 /* "TP" */
#define TPACPI_HKEY_INPUT_VERSION 0x4101
+/* ACPI \WGSV commands */
+enum {
+ TP_ACPI_WGSV_GET_STATE = 0x01, /* Get state information */
+ TP_ACPI_WGSV_PWR_ON_ON_RESUME = 0x02, /* Resume WWAN powered on */
+ TP_ACPI_WGSV_PWR_OFF_ON_RESUME = 0x03, /* Resume WWAN powered off */
+ TP_ACPI_WGSV_SAVE_STATE = 0x04, /* Save state for S4/S5 */
+};
+
+/* TP_ACPI_WGSV_GET_STATE bits */
+enum {
+ TP_ACPI_WGSV_STATE_WWANEXIST = 0x0001, /* WWAN hw available */
+ TP_ACPI_WGSV_STATE_WWANPWR = 0x0002, /* WWAN radio enabled */
+ TP_ACPI_WGSV_STATE_WWANPWRRES = 0x0004, /* WWAN state at resume */
+ TP_ACPI_WGSV_STATE_WWANBIOSOFF = 0x0008, /* WWAN disabled in BIOS */
+ TP_ACPI_WGSV_STATE_BLTHEXIST = 0x0001, /* BLTH hw available */
+ TP_ACPI_WGSV_STATE_BLTHPWR = 0x0002, /* BLTH radio enabled */
+ TP_ACPI_WGSV_STATE_BLTHPWRRES = 0x0004, /* BLTH state at resume */
+ TP_ACPI_WGSV_STATE_BLTHBIOSOFF = 0x0008, /* BLTH disabled in BIOS */
+ TP_ACPI_WGSV_STATE_UWBEXIST = 0x0010, /* UWB hw available */
+ TP_ACPI_WGSV_STATE_UWBPWR = 0x0020, /* UWB radio enabled */
+};
/****************************************************************************
* Main driver
enum {
TPACPI_RFK_BLUETOOTH_SW_ID = 0,
TPACPI_RFK_WWAN_SW_ID,
+ TPACPI_RFK_UWB_SW_ID,
};
/* Debugging */
#define TPACPI_LOG TPACPI_FILE ": "
-#define TPACPI_ERR KERN_ERR TPACPI_LOG
-#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG
-#define TPACPI_INFO KERN_INFO TPACPI_LOG
-#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG
+#define TPACPI_ALERT KERN_ALERT TPACPI_LOG
+#define TPACPI_CRIT KERN_CRIT TPACPI_LOG
+#define TPACPI_ERR KERN_ERR TPACPI_LOG
+#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG
+#define TPACPI_INFO KERN_INFO TPACPI_LOG
+#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG
#define TPACPI_DBG_ALL 0xffff
#define TPACPI_DBG_INIT 0x0001
void (*exit) (void);
void (*resume) (void);
void (*suspend) (pm_message_t state);
+ void (*shutdown) (void);
struct list_head all_drivers;
u32 bright_16levels:1;
u32 bright_acpimode:1;
u32 wan:1;
+ u32 uwb:1;
u32 fan_ctrl_status_undef:1;
u32 input_device_registered:1;
u32 platform_drv_registered:1;
unsigned int led;
};
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+static int dbg_wlswemul;
+static int tpacpi_wlsw_emulstate;
+static int dbg_bluetoothemul;
+static int tpacpi_bluetooth_emulstate;
+static int dbg_wwanemul;
+static int tpacpi_wwan_emulstate;
+static int dbg_uwbemul;
+static int tpacpi_uwb_emulstate;
+#endif
+
+
/****************************************************************************
****************************************************************************
*
return 0;
}
+static void tpacpi_shutdown_handler(struct platform_device *pdev)
+{
+ struct ibm_struct *ibm, *itmp;
+
+ list_for_each_entry_safe(ibm, itmp,
+ &tpacpi_all_drivers,
+ all_drivers) {
+ if (ibm->shutdown)
+ (ibm->shutdown)();
+ }
+}
+
static struct platform_driver tpacpi_pdriver = {
.driver = {
.name = TPACPI_DRVR_NAME,
},
.suspend = tpacpi_suspend_handler,
.resume = tpacpi_resume_handler,
+ .shutdown = tpacpi_shutdown_handler,
};
static struct platform_driver tpacpi_hwmon_pdriver = {
struct rfkill **rfk,
const enum rfkill_type rfktype,
const char *name,
+ const bool set_default,
int (*toggle_radio)(void *, enum rfkill_state),
int (*get_state)(void *, enum rfkill_state *))
{
int res;
- enum rfkill_state initial_state;
+ enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED;
+
+ res = get_state(NULL, &initial_state);
+ if (res < 0) {
+ printk(TPACPI_ERR
+ "failed to read initial state for %s, error %d; "
+ "will turn radio off\n", name, res);
+ } else if (set_default) {
+ /* try to set the initial state as the default for the rfkill
+ * type, since we ask the firmware to preserve it across S5 in
+ * NVRAM */
+ rfkill_set_default(rfktype,
+ (initial_state == RFKILL_STATE_UNBLOCKED) ?
+ RFKILL_STATE_UNBLOCKED :
+ RFKILL_STATE_SOFT_BLOCKED);
+ }
*rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
if (!*rfk) {
(*rfk)->name = name;
(*rfk)->get_state = get_state;
(*rfk)->toggle_radio = toggle_radio;
-
- if (!get_state(NULL, &initial_state))
- (*rfk)->state = initial_state;
+ (*rfk)->state = initial_state;
res = rfkill_register(*rfk);
if (res < 0) {
/* --------------------------------------------------------------------- */
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+
+static void tpacpi_send_radiosw_update(void);
+
+/* wlsw_emulstate ------------------------------------------------------ */
+static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wlsw_emulstate);
+}
+
+static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ if (tpacpi_wlsw_emulstate != t) {
+ tpacpi_wlsw_emulstate = !!t;
+ tpacpi_send_radiosw_update();
+ } else
+ tpacpi_wlsw_emulstate = !!t;
+
+ return count;
+}
+
+static DRIVER_ATTR(wlsw_emulstate, S_IWUSR | S_IRUGO,
+ tpacpi_driver_wlsw_emulstate_show,
+ tpacpi_driver_wlsw_emulstate_store);
+
+/* bluetooth_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_bluetooth_emulstate_show(
+ struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_bluetooth_emulstate);
+}
+
+static ssize_t tpacpi_driver_bluetooth_emulstate_store(
+ struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ tpacpi_bluetooth_emulstate = !!t;
+
+ return count;
+}
+
+static DRIVER_ATTR(bluetooth_emulstate, S_IWUSR | S_IRUGO,
+ tpacpi_driver_bluetooth_emulstate_show,
+ tpacpi_driver_bluetooth_emulstate_store);
+
+/* wwan_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_wwan_emulstate_show(
+ struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wwan_emulstate);
+}
+
+static ssize_t tpacpi_driver_wwan_emulstate_store(
+ struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ tpacpi_wwan_emulstate = !!t;
+
+ return count;
+}
+
+static DRIVER_ATTR(wwan_emulstate, S_IWUSR | S_IRUGO,
+ tpacpi_driver_wwan_emulstate_show,
+ tpacpi_driver_wwan_emulstate_store);
+
+/* uwb_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_uwb_emulstate_show(
+ struct device_driver *drv,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_uwb_emulstate);
+}
+
+static ssize_t tpacpi_driver_uwb_emulstate_store(
+ struct device_driver *drv,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ tpacpi_uwb_emulstate = !!t;
+
+ return count;
+}
+
+static DRIVER_ATTR(uwb_emulstate, S_IWUSR | S_IRUGO,
+ tpacpi_driver_uwb_emulstate_show,
+ tpacpi_driver_uwb_emulstate_store);
+#endif
+
+/* --------------------------------------------------------------------- */
+
static struct driver_attribute *tpacpi_driver_attributes[] = {
&driver_attr_debug_level, &driver_attr_version,
&driver_attr_interface_version,
i++;
}
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (!res && dbg_wlswemul)
+ res = driver_create_file(drv, &driver_attr_wlsw_emulstate);
+ if (!res && dbg_bluetoothemul)
+ res = driver_create_file(drv, &driver_attr_bluetooth_emulstate);
+ if (!res && dbg_wwanemul)
+ res = driver_create_file(drv, &driver_attr_wwan_emulstate);
+ if (!res && dbg_uwbemul)
+ res = driver_create_file(drv, &driver_attr_uwb_emulstate);
+#endif
+
return res;
}
for (i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
driver_remove_file(drv, tpacpi_driver_attributes[i]);
+
+#ifdef THINKPAD_ACPI_DEBUGFACILITIES
+ driver_remove_file(drv, &driver_attr_wlsw_emulstate);
+ driver_remove_file(drv, &driver_attr_bluetooth_emulstate);
+ driver_remove_file(drv, &driver_attr_wwan_emulstate);
+ driver_remove_file(drv, &driver_attr_uwb_emulstate);
+#endif
}
/****************************************************************************
static int hotkey_get_wlsw(int *status)
{
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_wlswemul) {
+ *status = !!tpacpi_wlsw_emulstate;
+ return 0;
+ }
+#endif
if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
return -EIO;
return 0;
{
int res;
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
res = hotkey_mask_get();
mutex_unlock(&hotkey_mutex);
if (parse_strtoul(buf, 0xffffffffUL, &t))
return -EINVAL;
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
res = hotkey_mask_set(t);
((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
return -EINVAL;
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
HOTKEY_CONFIG_CRITICAL_START
if (parse_strtoul(buf, 25, &t))
return -EINVAL;
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
hotkey_poll_freq = t;
static void bluetooth_update_rfk(void);
static void wan_update_rfk(void);
+static void uwb_update_rfk(void);
static void tpacpi_send_radiosw_update(void)
{
int wlsw;
bluetooth_update_rfk();
if (tp_features.wan)
wan_update_rfk();
+ if (tp_features.uwb)
+ uwb_update_rfk();
if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
mutex_lock(&tpacpi_inputdev_send_mutex);
hotkey_source_mask, hotkey_poll_freq);
#endif
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_wlswemul) {
+ tp_features.hotkey_wlsw = 1;
+ printk(TPACPI_INFO
+ "radio switch emulation enabled\n");
+ } else
+#endif
/* Not all thinkpads have a hardware radio switch */
if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
tp_features.hotkey_wlsw = 1;
return (res < 0)? res : 1;
}
+static bool hotkey_notify_hotkey(const u32 hkey,
+ bool *send_acpi_ev,
+ bool *ignore_acpi_ev)
+{
+ /* 0x1000-0x1FFF: key presses */
+ unsigned int scancode = hkey & 0xfff;
+ *send_acpi_ev = true;
+ *ignore_acpi_ev = false;
+
+ if (scancode > 0 && scancode < 0x21) {
+ scancode--;
+ if (!(hotkey_source_mask & (1 << scancode))) {
+ tpacpi_input_send_key(scancode);
+ *send_acpi_ev = false;
+ } else {
+ *ignore_acpi_ev = true;
+ }
+ return true;
+ }
+ return false;
+}
+
+static bool hotkey_notify_wakeup(const u32 hkey,
+ bool *send_acpi_ev,
+ bool *ignore_acpi_ev)
+{
+ /* 0x2000-0x2FFF: Wakeup reason */
+ *send_acpi_ev = true;
+ *ignore_acpi_ev = false;
+
+ switch (hkey) {
+ case 0x2304: /* suspend, undock */
+ case 0x2404: /* hibernation, undock */
+ hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
+ *ignore_acpi_ev = true;
+ break;
+
+ case 0x2305: /* suspend, bay eject */
+ case 0x2405: /* hibernation, bay eject */
+ hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
+ *ignore_acpi_ev = true;
+ break;
+
+ case 0x2313: /* Battery on critical low level (S3) */
+ case 0x2413: /* Battery on critical low level (S4) */
+ printk(TPACPI_ALERT
+ "EMERGENCY WAKEUP: battery almost empty\n");
+ /* how to auto-heal: */
+ /* 2313: woke up from S3, go to S4/S5 */
+ /* 2413: woke up from S4, go to S5 */
+ break;
+
+ default:
+ return false;
+ }
+
+ if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
+ printk(TPACPI_INFO
+ "woke up due to a hot-unplug "
+ "request...\n");
+ hotkey_wakeup_reason_notify_change();
+ }
+ return true;
+}
+
+static bool hotkey_notify_usrevent(const u32 hkey,
+ bool *send_acpi_ev,
+ bool *ignore_acpi_ev)
+{
+ /* 0x5000-0x5FFF: human interface helpers */
+ *send_acpi_ev = true;
+ *ignore_acpi_ev = false;
+
+ switch (hkey) {
+ case 0x5010: /* Lenovo new BIOS: brightness changed */
+ case 0x500b: /* X61t: tablet pen inserted into bay */
+ case 0x500c: /* X61t: tablet pen removed from bay */
+ return true;
+
+ case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
+ case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+ tpacpi_input_send_tabletsw();
+ hotkey_tablet_mode_notify_change();
+ *send_acpi_ev = false;
+ return true;
+
+ case 0x5001:
+ case 0x5002:
+ /* LID switch events. Do not propagate */
+ *ignore_acpi_ev = true;
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+static bool hotkey_notify_thermal(const u32 hkey,
+ bool *send_acpi_ev,
+ bool *ignore_acpi_ev)
+{
+ /* 0x6000-0x6FFF: thermal alarms */
+ *send_acpi_ev = true;
+ *ignore_acpi_ev = false;
+
+ switch (hkey) {
+ case 0x6011:
+ printk(TPACPI_CRIT
+ "THERMAL ALARM: battery is too hot!\n");
+ /* recommended action: warn user through gui */
+ return true;
+ case 0x6012:
+ printk(TPACPI_ALERT
+ "THERMAL EMERGENCY: battery is extremely hot!\n");
+ /* recommended action: immediate sleep/hibernate */
+ return true;
+ case 0x6021:
+ printk(TPACPI_CRIT
+ "THERMAL ALARM: "
+ "a sensor reports something is too hot!\n");
+ /* recommended action: warn user through gui, that */
+ /* some internal component is too hot */
+ return true;
+ case 0x6022:
+ printk(TPACPI_ALERT
+ "THERMAL EMERGENCY: "
+ "a sensor reports something is extremely hot!\n");
+ /* recommended action: immediate sleep/hibernate */
+ return true;
+ case 0x6030:
+ printk(TPACPI_INFO
+ "EC reports that Thermal Table has changed\n");
+ /* recommended action: do nothing, we don't have
+ * Lenovo ATM information */
+ return true;
+ default:
+ printk(TPACPI_ALERT
+ "THERMAL ALERT: unknown thermal alarm received\n");
+ return false;
+ }
+}
+
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
{
u32 hkey;
- unsigned int scancode;
- int send_acpi_ev;
- int ignore_acpi_ev;
- int unk_ev;
+ bool send_acpi_ev;
+ bool ignore_acpi_ev;
+ bool known_ev;
if (event != 0x80) {
printk(TPACPI_ERR
/* forward it to userspace, maybe it knows how to handle it */
acpi_bus_generate_netlink_event(
ibm->acpi->device->pnp.device_class,
- ibm->acpi->device->dev.bus_id,
+ dev_name(&ibm->acpi->device->dev),
event, 0);
return;
}
return;
}
- send_acpi_ev = 1;
- ignore_acpi_ev = 0;
- unk_ev = 0;
+ send_acpi_ev = true;
+ ignore_acpi_ev = false;
switch (hkey >> 12) {
case 1:
/* 0x1000-0x1FFF: key presses */
- scancode = hkey & 0xfff;
- if (scancode > 0 && scancode < 0x21) {
- scancode--;
- if (!(hotkey_source_mask & (1 << scancode))) {
- tpacpi_input_send_key(scancode);
- send_acpi_ev = 0;
- } else {
- ignore_acpi_ev = 1;
- }
- } else {
- unk_ev = 1;
- }
+ known_ev = hotkey_notify_hotkey(hkey, &send_acpi_ev,
+ &ignore_acpi_ev);
break;
case 2:
- /* Wakeup reason */
- switch (hkey) {
- case 0x2304: /* suspend, undock */
- case 0x2404: /* hibernation, undock */
- hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
- ignore_acpi_ev = 1;
- break;
- case 0x2305: /* suspend, bay eject */
- case 0x2405: /* hibernation, bay eject */
- hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
- ignore_acpi_ev = 1;
- break;
- default:
- unk_ev = 1;
- }
- if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
- printk(TPACPI_INFO
- "woke up due to a hot-unplug "
- "request...\n");
- hotkey_wakeup_reason_notify_change();
- }
+ /* 0x2000-0x2FFF: Wakeup reason */
+ known_ev = hotkey_notify_wakeup(hkey, &send_acpi_ev,
+ &ignore_acpi_ev);
break;
case 3:
- /* bay-related wakeups */
+ /* 0x3000-0x3FFF: bay-related wakeups */
if (hkey == 0x3003) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"bay ejected\n");
hotkey_wakeup_hotunplug_complete_notify_change();
+ known_ev = true;
} else {
- unk_ev = 1;
+ known_ev = false;
}
break;
case 4:
- /* dock-related wakeups */
+ /* 0x4000-0x4FFF: dock-related wakeups */
if (hkey == 0x4003) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"undocked\n");
hotkey_wakeup_hotunplug_complete_notify_change();
+ known_ev = true;
} else {
- unk_ev = 1;
+ known_ev = false;
}
break;
case 5:
/* 0x5000-0x5FFF: human interface helpers */
- switch (hkey) {
- case 0x5010: /* Lenovo new BIOS: brightness changed */
- case 0x500b: /* X61t: tablet pen inserted into bay */
- case 0x500c: /* X61t: tablet pen removed from bay */
- break;
- case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
- case 0x500a: /* X41t-X61t: swivel down (normal mode) */
- tpacpi_input_send_tabletsw();
- hotkey_tablet_mode_notify_change();
- send_acpi_ev = 0;
- break;
- case 0x5001:
- case 0x5002:
- /* LID switch events. Do not propagate */
- ignore_acpi_ev = 1;
- break;
- default:
- unk_ev = 1;
- }
+ known_ev = hotkey_notify_usrevent(hkey, &send_acpi_ev,
+ &ignore_acpi_ev);
+ break;
+ case 6:
+ /* 0x6000-0x6FFF: thermal alarms */
+ known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev,
+ &ignore_acpi_ev);
break;
case 7:
/* 0x7000-0x7FFF: misc */
if (tp_features.hotkey_wlsw && hkey == 0x7000) {
tpacpi_send_radiosw_update();
send_acpi_ev = 0;
+ known_ev = true;
break;
}
/* fallthrough to default */
default:
- unk_ev = 1;
+ known_ev = false;
}
- if (unk_ev) {
+ if (!known_ev) {
printk(TPACPI_NOTICE
"unhandled HKEY event 0x%04x\n", hkey);
+ printk(TPACPI_NOTICE
+ "please report the conditions when this "
+ "event happened to %s\n", TPACPI_MAIL);
}
/* Legacy events */
if (!ignore_acpi_ev && send_acpi_ev) {
acpi_bus_generate_netlink_event(
ibm->acpi->device->pnp.device_class,
- ibm->acpi->device->dev.bus_id,
+ dev_name(&ibm->acpi->device->dev),
event, hkey);
}
}
return len;
}
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
res = hotkey_status_get(&status);
if (!res)
if (!tp_features.hotkey)
return -ENODEV;
- if (mutex_lock_interruptible(&hotkey_mutex))
+ if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
status = -1;
/* ACPI GBDC/SBDC bits */
TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */
- TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */
+ TP_ACPI_BLUETOOTH_RESUMECTRL = 0x04, /* Bluetooth state at resume:
+ off / last state */
+};
+
+enum {
+ /* ACPI \BLTH commands */
+ TP_ACPI_BLTH_GET_ULTRAPORT_ID = 0x00, /* Get Ultraport BT ID */
+ TP_ACPI_BLTH_GET_PWR_ON_RESUME = 0x01, /* Get power-on-resume state */
+ TP_ACPI_BLTH_PWR_ON_ON_RESUME = 0x02, /* Resume powered on */
+ TP_ACPI_BLTH_PWR_OFF_ON_RESUME = 0x03, /* Resume powered off */
+ TP_ACPI_BLTH_SAVE_STATE = 0x05, /* Save state for S4/S5 */
};
static struct rfkill *tpacpi_bluetooth_rfkill;
+static void bluetooth_suspend(pm_message_t state)
+{
+ /* Try to make sure radio will resume powered off */
+ acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+ TP_ACPI_BLTH_PWR_OFF_ON_RESUME);
+}
+
static int bluetooth_get_radiosw(void)
{
int status;
if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
return RFKILL_STATE_HARD_BLOCKED;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_bluetoothemul)
+ return (tpacpi_bluetooth_emulstate) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
return -EIO;
&& radio_on)
return -EPERM;
- if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
- return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_bluetoothemul) {
+ tpacpi_bluetooth_emulstate = !!radio_on;
+ if (update_rfk)
+ bluetooth_update_rfk();
+ return 0;
+ }
+#endif
+
+ /* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
if (radio_on)
- status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+ status = TP_ACPI_BLUETOOTH_RADIOSSW;
else
- status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+ status = 0;
if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
return -EIO;
return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
}
+static void bluetooth_shutdown(void)
+{
+ /* Order firmware to save current state to NVRAM */
+ if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+ TP_ACPI_BLTH_SAVE_STATE))
+ printk(TPACPI_NOTICE
+ "failed to save bluetooth state to NVRAM\n");
+}
+
static void bluetooth_exit(void)
{
+ bluetooth_shutdown();
+
if (tpacpi_bluetooth_rfkill)
rfkill_unregister(tpacpi_bluetooth_rfkill);
str_supported(tp_features.bluetooth),
status);
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_bluetoothemul) {
+ tp_features.bluetooth = 1;
+ printk(TPACPI_INFO
+ "bluetooth switch emulation enabled\n");
+ } else
+#endif
if (tp_features.bluetooth &&
!(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
/* no bluetooth hardware present in system */
&tpacpi_bluetooth_rfkill,
RFKILL_TYPE_BLUETOOTH,
"tpacpi_bluetooth_sw",
+ true,
tpacpi_bluetooth_rfk_set,
tpacpi_bluetooth_rfk_get);
if (res) {
.read = bluetooth_read,
.write = bluetooth_write,
.exit = bluetooth_exit,
+ .suspend = bluetooth_suspend,
+ .shutdown = bluetooth_shutdown,
};
/*************************************************************************
/* ACPI GWAN/SWAN bits */
TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */
TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */
- TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */
+ TP_ACPI_WANCARD_RESUMECTRL = 0x04, /* Wan state at resume:
+ off / last state */
};
static struct rfkill *tpacpi_wan_rfkill;
+static void wan_suspend(pm_message_t state)
+{
+ /* Try to make sure radio will resume powered off */
+ acpi_evalf(NULL, NULL, "\\WGSV", "qvd",
+ TP_ACPI_WGSV_PWR_OFF_ON_RESUME);
+}
+
static int wan_get_radiosw(void)
{
int status;
if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
return RFKILL_STATE_HARD_BLOCKED;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_wwanemul)
+ return (tpacpi_wwan_emulstate) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
return -EIO;
&& radio_on)
return -EPERM;
- if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
- return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_wwanemul) {
+ tpacpi_wwan_emulstate = !!radio_on;
+ if (update_rfk)
+ wan_update_rfk();
+ return 0;
+ }
+#endif
+
+ /* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
if (radio_on)
- status |= TP_ACPI_WANCARD_RADIOSSW;
+ status = TP_ACPI_WANCARD_RADIOSSW;
else
- status &= ~TP_ACPI_WANCARD_RADIOSSW;
+ status = 0;
if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
return -EIO;
return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
}
+static void wan_shutdown(void)
+{
+ /* Order firmware to save current state to NVRAM */
+ if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd",
+ TP_ACPI_WGSV_SAVE_STATE))
+ printk(TPACPI_NOTICE
+ "failed to save WWAN state to NVRAM\n");
+}
+
static void wan_exit(void)
{
+ wan_shutdown();
+
if (tpacpi_wan_rfkill)
rfkill_unregister(tpacpi_wan_rfkill);
str_supported(tp_features.wan),
status);
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_wwanemul) {
+ tp_features.wan = 1;
+ printk(TPACPI_INFO
+ "wwan switch emulation enabled\n");
+ } else
+#endif
if (tp_features.wan &&
!(status & TP_ACPI_WANCARD_HWPRESENT)) {
/* no wan hardware present in system */
&tpacpi_wan_rfkill,
RFKILL_TYPE_WWAN,
"tpacpi_wwan_sw",
+ true,
tpacpi_wan_rfk_set,
tpacpi_wan_rfk_get);
if (res) {
.read = wan_read,
.write = wan_write,
.exit = wan_exit,
+ .suspend = wan_suspend,
+ .shutdown = wan_shutdown,
+};
+
+/*************************************************************************
+ * UWB subdriver
+ */
+
+enum {
+ /* ACPI GUWB/SUWB bits */
+ TP_ACPI_UWB_HWPRESENT = 0x01, /* UWB hw available */
+ TP_ACPI_UWB_RADIOSSW = 0x02, /* UWB radio enabled */
+};
+
+static struct rfkill *tpacpi_uwb_rfkill;
+
+static int uwb_get_radiosw(void)
+{
+ int status;
+
+ if (!tp_features.uwb)
+ return -ENODEV;
+
+ /* WLSW overrides UWB in firmware/hardware, reflect that */
+ if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
+ return RFKILL_STATE_HARD_BLOCKED;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_uwbemul)
+ return (tpacpi_uwb_emulstate) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
+ if (!acpi_evalf(hkey_handle, &status, "GUWB", "d"))
+ return -EIO;
+
+ return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static void uwb_update_rfk(void)
+{
+ int status;
+
+ if (!tpacpi_uwb_rfkill)
+ return;
+
+ status = uwb_get_radiosw();
+ if (status < 0)
+ return;
+ rfkill_force_state(tpacpi_uwb_rfkill, status);
+}
+
+static int uwb_set_radiosw(int radio_on, int update_rfk)
+{
+ int status;
+
+ if (!tp_features.uwb)
+ return -ENODEV;
+
+ /* WLSW overrides UWB in firmware/hardware, but there is no
+ * reason to risk weird behaviour. */
+ if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
+ && radio_on)
+ return -EPERM;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_uwbemul) {
+ tpacpi_uwb_emulstate = !!radio_on;
+ if (update_rfk)
+ uwb_update_rfk();
+ return 0;
+ }
+#endif
+
+ status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0;
+ if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status))
+ return -EIO;
+
+ if (update_rfk)
+ uwb_update_rfk();
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state)
+{
+ int uwbs = uwb_get_radiosw();
+
+ if (uwbs < 0)
+ return uwbs;
+
+ *state = uwbs;
+ return 0;
+}
+
+static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state)
+{
+ return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
+static void uwb_exit(void)
+{
+ if (tpacpi_uwb_rfkill)
+ rfkill_unregister(tpacpi_uwb_rfkill);
+}
+
+static int __init uwb_init(struct ibm_init_struct *iibm)
+{
+ int res;
+ int status = 0;
+
+ vdbg_printk(TPACPI_DBG_INIT, "initializing uwb subdriver\n");
+
+ TPACPI_ACPIHANDLE_INIT(hkey);
+
+ tp_features.uwb = hkey_handle &&
+ acpi_evalf(hkey_handle, &status, "GUWB", "qd");
+
+ vdbg_printk(TPACPI_DBG_INIT, "uwb is %s, status 0x%02x\n",
+ str_supported(tp_features.uwb),
+ status);
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+ if (dbg_uwbemul) {
+ tp_features.uwb = 1;
+ printk(TPACPI_INFO
+ "uwb switch emulation enabled\n");
+ } else
+#endif
+ if (tp_features.uwb &&
+ !(status & TP_ACPI_UWB_HWPRESENT)) {
+ /* no uwb hardware present in system */
+ tp_features.uwb = 0;
+ dbg_printk(TPACPI_DBG_INIT,
+ "uwb hardware not installed\n");
+ }
+
+ if (!tp_features.uwb)
+ return 1;
+
+ res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID,
+ &tpacpi_uwb_rfkill,
+ RFKILL_TYPE_UWB,
+ "tpacpi_uwb_sw",
+ false,
+ tpacpi_uwb_rfk_set,
+ tpacpi_uwb_rfk_get);
+
+ return res;
+}
+
+static struct ibm_struct uwb_driver_data = {
+ .name = "uwb",
+ .exit = uwb_exit,
+ .flags.experimental = 1,
};
/*************************************************************************
}
acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- ibm->acpi->device->dev.bus_id,
+ dev_name(&ibm->acpi->device->dev),
event, data);
}
{
acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
- ibm->acpi->device->dev.bus_id,
+ dev_name(&ibm->acpi->device->dev),
event, 0);
}
value < 0)
return -EINVAL;
- res = mutex_lock_interruptible(&brightness_mutex);
+ res = mutex_lock_killable(&brightness_mutex);
if (res < 0)
return res;
); /* all others */
/*
+ * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the
+ * HFSP register at boot, so it contains 0x07 but the Thinkpad could
+ * be in auto mode (0x80).
+ *
+ * This is corrected by any write to HFSP either by the driver, or
+ * by the firmware.
+ *
+ * We assume 0x07 really means auto mode while this quirk is active,
+ * as this is far more likely than the ThinkPad being in level 7,
+ * which is only used by the firmware during thermal emergencies.
+ */
+
+static void fan_quirk1_detect(void)
+{
+ /* In some ThinkPads, neither the EC nor the ACPI
+ * DSDT initialize the HFSP register, and it ends up
+ * being initially set to 0x07 when it *could* be
+ * either 0x07 or 0x80.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e),
+ * TP-76 (R52), TP-70 (T43, R52), which are known
+ * to be buggy. */
+ if (fan_control_initial_status == 0x07) {
+ switch (thinkpad_id.ec_model) {
+ case 0x5931: /* TP-1Y */
+ case 0x3837: /* TP-78 */
+ case 0x3637: /* TP-76 */
+ case 0x3037: /* TP-70 */
+ printk(TPACPI_NOTICE
+ "fan_init: initial fan status is unknown, "
+ "assuming it is in auto mode\n");
+ tp_features.fan_ctrl_status_undef = 1;
+ ;;
+ }
+ }
+}
+
+static void fan_quirk1_handle(u8 *fan_status)
+{
+ if (unlikely(tp_features.fan_ctrl_status_undef)) {
+ if (*fan_status != fan_control_initial_status) {
+ /* something changed the HFSP regisnter since
+ * driver init time, so it is not undefined
+ * anymore */
+ tp_features.fan_ctrl_status_undef = 0;
+ } else {
+ /* Return most likely status. In fact, it
+ * might be the only possible status */
+ *fan_status = TP_EC_FAN_AUTO;
+ }
+ }
+}
+
+/*
* Call with fan_mutex held
*/
static void fan_update_desired_level(u8 status)
if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
return -EIO;
- if (likely(status))
+ if (likely(status)) {
*status = s;
+ fan_quirk1_handle(status);
+ }
break;
int rc;
u8 s;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
rc = fan_get_status(&s);
if (!rc)
if (!fan_control_allowed)
return -EPERM;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
if (level == TPACPI_FAN_LAST_LEVEL)
if (!fan_control_allowed)
return -EPERM;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
switch (fan_control_access_mode) {
if (!fan_control_allowed)
return -EPERM;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
rc = 0;
if (!fan_control_allowed)
return -EPERM;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
rc = 0;
if (res)
return res;
- if (unlikely(tp_features.fan_ctrl_status_undef)) {
- if (status != fan_control_initial_status) {
- tp_features.fan_ctrl_status_undef = 0;
- } else {
- /* Return most likely status. In fact, it
- * might be the only possible status */
- status = TP_EC_FAN_AUTO;
- }
- }
-
if (status & TP_EC_FAN_FULLSPEED) {
mode = 0;
} else if (status & TP_EC_FAN_AUTO) {
if (res)
return res;
- if (unlikely(tp_features.fan_ctrl_status_undef)) {
- if (status != fan_control_initial_status) {
- tp_features.fan_ctrl_status_undef = 0;
- } else {
- status = TP_EC_FAN_AUTO;
- }
- }
-
if ((status &
(TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
status = fan_control_desired_level;
/* scale down from 0-255 to 0-7 */
newlevel = (s >> 5) & 0x07;
- if (mutex_lock_interruptible(&fan_mutex))
+ if (mutex_lock_killable(&fan_mutex))
return -ERESTARTSYS;
rc = fan_get_status(&status);
if (likely(acpi_ec_read(fan_status_offset,
&fan_control_initial_status))) {
fan_status_access_mode = TPACPI_FAN_RD_TPEC;
-
- /* In some ThinkPads, neither the EC nor the ACPI
- * DSDT initialize the fan status, and it ends up
- * being set to 0x07 when it *could* be either
- * 0x07 or 0x80.
- *
- * Enable for TP-1Y (T43), TP-78 (R51e),
- * TP-76 (R52), TP-70 (T43, R52), which are known
- * to be buggy. */
- if (fan_control_initial_status == 0x07) {
- switch (thinkpad_id.ec_model) {
- case 0x5931: /* TP-1Y */
- case 0x3837: /* TP-78 */
- case 0x3637: /* TP-76 */
- case 0x3037: /* TP-70 */
- printk(TPACPI_NOTICE
- "fan_init: initial fan status "
- "is unknown, assuming it is "
- "in auto mode\n");
- tp_features.fan_ctrl_status_undef = 1;
- ;;
- }
- }
+ fan_quirk1_detect();
} else {
printk(TPACPI_ERR
"ThinkPad ACPI EC access misbehaving, "
if (rc < 0)
return rc;
- if (unlikely(tp_features.fan_ctrl_status_undef)) {
- if (status != fan_control_initial_status)
- tp_features.fan_ctrl_status_undef = 0;
- else
- /* Return most likely status. In fact, it
- * might be the only possible status */
- status = TP_EC_FAN_AUTO;
- }
-
len += sprintf(p + len, "status:\t\t%s\n",
(status != 0) ? "enabled" : "disabled");
.init = wan_init,
.data = &wan_driver_data,
},
+ {
+ .init = uwb_init,
+ .data = &uwb_driver_data,
+ },
#ifdef CONFIG_THINKPAD_ACPI_VIDEO
{
.init = video_init,
TPACPI_PARAM(volume);
TPACPI_PARAM(fan);
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+module_param(dbg_wlswemul, uint, 0);
+MODULE_PARM_DESC(dbg_wlswemul, "Enables WLSW emulation");
+module_param_named(wlsw_state, tpacpi_wlsw_emulstate, bool, 0);
+MODULE_PARM_DESC(wlsw_state,
+ "Initial state of the emulated WLSW switch");
+
+module_param(dbg_bluetoothemul, uint, 0);
+MODULE_PARM_DESC(dbg_bluetoothemul, "Enables bluetooth switch emulation");
+module_param_named(bluetooth_state, tpacpi_bluetooth_emulstate, bool, 0);
+MODULE_PARM_DESC(bluetooth_state,
+ "Initial state of the emulated bluetooth switch");
+
+module_param(dbg_wwanemul, uint, 0);
+MODULE_PARM_DESC(dbg_wwanemul, "Enables WWAN switch emulation");
+module_param_named(wwan_state, tpacpi_wwan_emulstate, bool, 0);
+MODULE_PARM_DESC(wwan_state,
+ "Initial state of the emulated WWAN switch");
+
+module_param(dbg_uwbemul, uint, 0);
+MODULE_PARM_DESC(dbg_uwbemul, "Enables UWB switch emulation");
+module_param_named(uwb_state, tpacpi_uwb_emulstate, bool, 0);
+MODULE_PARM_DESC(uwb_state,
+ "Initial state of the emulated UWB switch");
+#endif
+
static void thinkpad_acpi_module_exit(void)
{
struct ibm_struct *ibm, *itmp;
case 8:
return pm_translate_signal_group_number_on_island8(subgroup);
default:
- dev_dbg(sbd_core(), "%s:%u: island not found: %lu\n", __func__,
+ dev_dbg(sbd_core(), "%s:%u: island not found: %llu\n", __func__,
__LINE__, group);
BUG();
break;
signal_select, attr1, attr2, attr3);
if (ret)
dev_err(sbd_core(),
- "%s:%u: error:%d 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+ "%s:%u: error:%d 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx\n",
__func__, __LINE__, ret, lv1_signal_group, bus_select,
signal_select, attr1, attr2, attr3);
lpm_priv->tb_count = tmp;
- dev_dbg(sbd_core(), "%s:%u: tb_count %lu (%lxh)\n", __func__, __LINE__,
+ dev_dbg(sbd_core(), "%s:%u: tb_count %llu (%llxh)\n", __func__, __LINE__,
lpm_priv->tb_count, lpm_priv->tb_count);
}
EXPORT_SYMBOL_GPL(ps3_disable_pm);
if (offset >= lpm_priv->tb_count)
return 0;
- count = min(count, lpm_priv->tb_count - offset);
+ count = min_t(u64, count, lpm_priv->tb_count - offset);
while (*bytes_copied < count) {
const unsigned long request = count - *bytes_copied;
if (offset >= lpm_priv->tb_count)
return 0;
- count = min(count, lpm_priv->tb_count - offset);
+ count = min_t(u64, count, lpm_priv->tb_count - offset);
while (*bytes_copied < count) {
const unsigned long request = count - *bytes_copied;
result = copy_to_user(buf, lpm_priv->tb_cache, tmp);
if (result) {
- dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%p\n",
+ dev_dbg(sbd_core(), "%s:%u: 0x%llx bytes at 0x%p\n",
__func__, __LINE__, tmp, buf);
dev_err(sbd_core(), "%s:%u: copy_to_user failed: %d\n",
__func__, __LINE__, result);
lpm_priv->shadow.group_control = PS3_LPM_SHADOW_REG_INIT;
lpm_priv->shadow.debug_bus_control = PS3_LPM_SHADOW_REG_INIT;
- dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%lx, outlet_id 0x%lx, "
- "tb_size 0x%lx\n", __func__, __LINE__, lpm_priv->lpm_id,
+ dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%llx, outlet_id 0x%llx, "
+ "tb_size 0x%llx\n", __func__, __LINE__, lpm_priv->lpm_id,
lpm_priv->outlet_id, tb_size);
return 0;
static void __maybe_unused _dump_ports_bmp(
const struct ports_bmp *bmp, const char *func, int line)
{
- pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
+ pr_debug("%s:%d: ports_bmp: %016llxh\n", func, line, bmp->status);
}
#define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
struct vuart_triggers *trig)
{
int result;
- unsigned long size;
- unsigned long val;
+ u64 size;
+ u64 val;
+ u64 tx;
result = lv1_get_virtual_uart_param(dev->port_number,
- PARAM_TX_TRIGGER, &trig->tx);
+ PARAM_TX_TRIGGER, &tx);
+ trig->tx = tx;
if (result) {
dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
unsigned int rx)
{
int result;
- unsigned long size;
+ u64 size;
result = lv1_set_virtual_uart_param(dev->port_number,
PARAM_TX_TRIGGER, tx);
dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n",
__func__, __LINE__, ps3_result(result));
- dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__,
+ dev_dbg(&dev->core, "%s:%d: %llxh\n", __func__, __LINE__,
*bytes_waiting);
return result;
}
*status = tmp & priv->interrupt_mask;
- dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
+ dev_dbg(&dev->core, "%s:%d: m %llxh, s %llxh, m&s %lxh\n",
__func__, __LINE__, priv->interrupt_mask, tmp, *status);
return result;
*/
static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
- const void *buf, unsigned int bytes, unsigned long *bytes_written)
+ const void *buf, unsigned int bytes, u64 *bytes_written)
{
int result;
struct ps3_vuart_port_priv *priv = to_port_priv(dev);
priv->stats.bytes_written += *bytes_written;
- dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__, __LINE__,
+ dev_dbg(&dev->core, "%s:%d: wrote %llxh/%xh=>%lxh\n", __func__, __LINE__,
*bytes_written, bytes, priv->stats.bytes_written);
return result;
*/
static int ps3_vuart_raw_read(struct ps3_system_bus_device *dev, void *buf,
- unsigned int bytes, unsigned long *bytes_read)
+ unsigned int bytes, u64 *bytes_read)
{
int result;
struct ps3_vuart_port_priv *priv = to_port_priv(dev);
priv->stats.bytes_read += *bytes_read;
- dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
+ dev_dbg(&dev->core, "%s:%d: read %llxh/%xh=>%lxh\n", __func__, __LINE__,
*bytes_read, bytes, priv->stats.bytes_read);
return result;
spin_lock_irqsave(&priv->tx_list.lock, flags);
if (list_empty(&priv->tx_list.head)) {
- unsigned long bytes_written;
+ u64 bytes_written;
result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
list_add_tail(&lb->link, &priv->rx_list.head);
priv->rx_list.bytes_held += bytes;
- dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %lxh bytes\n",
+ dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %llxh bytes\n",
__func__, __LINE__, lb->dbg_number, bytes);
*bytes_queued = bytes;
list_for_each_entry_safe(lb, n, &priv->tx_list.head, link) {
- unsigned long bytes_written;
+ u64 bytes_written;
result = ps3_vuart_raw_write(dev, lb->head, lb->tail - lb->head,
&bytes_written);
if (bytes_written < lb->tail - lb->head) {
lb->head += bytes_written;
dev_dbg(&dev->core,
- "%s:%d cleared buf_%lu, %lxh bytes\n",
+ "%s:%d cleared buf_%lu, %llxh bytes\n",
__func__, __LINE__, lb->dbg_number,
bytes_written);
goto port_full;
__func__, __LINE__, n);
dev->region_idx = __ffs(dev->accessible_regions);
dev_info(&dev->sbd.core,
- "First accessible region has index %u start %lu size %lu\n",
+ "First accessible region has index %u start %llu size %llu\n",
dev->region_idx, dev->regions[dev->region_idx].start,
dev->regions[dev->region_idx].size);
const char *op = write ? "write" : "read";
int res;
- dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+ dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
__func__, __LINE__, op, sectors, start_sector);
init_completion(&dev->done);
wait_for_completion(&dev->done);
if (dev->lv1_status) {
- dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+ dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
__LINE__, op, dev->lv1_status);
return dev->lv1_status;
}
{
int res;
- dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%lx\n", __func__,
+ dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%llx\n", __func__,
__LINE__, cmd);
init_completion(&dev->done);
arg2, arg3, arg4, &dev->tag);
if (res) {
dev_err(&dev->sbd.core,
- "%s:%u: send_device_command 0x%lx failed %d\n",
+ "%s:%u: send_device_command 0x%llx failed %d\n",
__func__, __LINE__, cmd, res);
return -1;
}
wait_for_completion(&dev->done);
if (dev->lv1_status) {
- dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx failed 0x%lx\n",
+ dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx failed 0x%llx\n",
__func__, __LINE__, cmd, dev->lv1_status);
return dev->lv1_status;
}
- dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx completed\n", __func__,
+ dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx completed\n", __func__,
__LINE__, cmd);
return 0;
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <mach/hardware.h>
+
#define TIMER_FREQ CLOCK_TICK_RATE
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
static unsigned char rtc_irq_bits;
/*
- * Enable timer and/or alarm interrupts.
+ * Enable 1/second update and/or alarm interrupts.
*/
static int set_rtc_irq_bit(unsigned char bit)
{
int ret;
val = rtc_irq_bits | bit;
+ val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
if (ret == 0)
rtc_irq_bits = val;
}
/*
- * Disable timer and/or alarm interrupts.
+ * Disable update and/or alarm interrupts.
*/
static int mask_rtc_irq_bit(unsigned char bit)
{
return ret;
}
-static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
+static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
{
int ret;
return ret;
}
-static inline int twl4030_rtc_irq_set_state(int enabled)
+static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
{
int ret;
unsigned char alarm_data[ALL_TIME_REGS + 1];
int ret;
- ret = twl4030_rtc_alarm_irq_set_state(0);
+ ret = twl4030_rtc_alarm_irq_enable(dev, 0);
if (ret)
goto out;
}
if (alm->enabled)
- ret = twl4030_rtc_alarm_irq_set_state(1);
+ ret = twl4030_rtc_alarm_irq_enable(dev, 1);
out:
return ret;
}
-#ifdef CONFIG_RTC_INTF_DEV
-
-static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
- unsigned long arg)
-{
- switch (cmd) {
- case RTC_AIE_OFF:
- return twl4030_rtc_alarm_irq_set_state(0);
- case RTC_AIE_ON:
- return twl4030_rtc_alarm_irq_set_state(1);
- case RTC_UIE_OFF:
- return twl4030_rtc_irq_set_state(0);
- case RTC_UIE_ON:
- return twl4030_rtc_irq_set_state(1);
-
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-#else
-#define twl4030_rtc_ioctl NULL
-#endif
-
static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
{
unsigned long events = 0;
}
static struct rtc_class_ops twl4030_rtc_ops = {
- .ioctl = twl4030_rtc_ioctl,
.read_time = twl4030_rtc_read_time,
.set_time = twl4030_rtc_set_time,
.read_alarm = twl4030_rtc_read_alarm,
.set_alarm = twl4030_rtc_set_alarm,
+ .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
+ .update_irq_enable = twl4030_rtc_update_irq_enable,
};
/*----------------------------------------------------------------------*/
rtc = rtc_device_register(pdev->name,
&pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- ret = -EINVAL;
+ ret = PTR_ERR(rtc);
dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
PTR_ERR(rtc));
goto out0;
platform_set_drvdata(pdev, rtc);
ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
-
if (ret < 0)
goto out1;
return ret;
-
out2:
free_irq(irq, rtc);
out1:
static void twl4030_rtc_shutdown(struct platform_device *pdev)
{
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
- BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ /* mask timer interrupts, but leave alarm interrupts on to enable
+ power-on when alarm is triggered */
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
}
#ifdef CONFIG_PM
fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
break;
default:
- ibmvfc_log(vhost, 3, "Unknown port speed: %ld Gbit\n",
+ ibmvfc_log(vhost, 3, "Unknown port speed: %lld Gbit\n",
vhost->login_buf->resp.link_speed / 100);
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
{
const char *desc = ibmvfc_get_ae_desc(crq->event);
- ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
- " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
+ ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
+ " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
switch (crq->event) {
case IBMVFC_AE_LINK_UP:
ibmvfc_link_down(vhost, IBMVFC_HALTED);
break;
default:
- dev_err(vhost->dev, "Unknown async event received: %ld\n", crq->event);
+ dev_err(vhost->dev, "Unknown async event received: %lld\n", crq->event);
break;
};
}
* actually sent
*/
if (unlikely(!ibmvfc_valid_event(&vhost->pool, evt))) {
- dev_err(vhost->dev, "Returned correlation_token 0x%08lx is invalid!\n",
+ dev_err(vhost->dev, "Returned correlation_token 0x%08llx is invalid!\n",
crq->ioba);
return;
}
if (unlikely(atomic_read(&evt->free))) {
- dev_err(vhost->dev, "Received duplicate correlation_token 0x%08lx!\n",
+ dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n",
crq->ioba);
return;
}
tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
if (!tgt) {
- dev_err(vhost->dev, "Target allocation failure for scsi id %08lx\n",
+ dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
scsi_id);
return -ENOMEM;
}
#define DBG_CMD(CMD) do { if (ibmvfc_debug) CMD; } while (0)
#define tgt_dbg(t, fmt, ...) \
- DBG_CMD(dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
+ DBG_CMD(dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
#define tgt_info(t, fmt, ...) \
- dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+ dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
#define tgt_err(t, fmt, ...) \
- dev_err((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+ dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
#define ibmvfc_dbg(vhost, ...) \
DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
}
sdev_printk(KERN_INFO, cmd->device,
- "aborting command. lun 0x%lx, tag 0x%lx\n",
+ "aborting command. lun 0x%llx, tag 0x%llx\n",
(((u64) lun) << 48), (u64) found_evt);
wait_for_completion(&evt->comp);
if (rsp_rc) {
if (printk_ratelimit())
sdev_printk(KERN_WARNING, cmd->device,
- "abort code %d for task tag 0x%lx\n",
+ "abort code %d for task tag 0x%llx\n",
rsp_rc, tsk_mgmt->task_tag);
return FAILED;
}
if (found_evt == NULL) {
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
- sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%lx completed\n",
+ sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%llx completed\n",
tsk_mgmt->task_tag);
return SUCCESS;
}
- sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%lx\n",
+ sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%llx\n",
tsk_mgmt->task_tag);
cmd->result = (DID_ABORT << 16);
return FAILED;
}
- sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n",
+ sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%llx\n",
(((u64) lun) << 48));
wait_for_completion(&evt->comp);
if (rsp_rc) {
if (printk_ratelimit())
sdev_printk(KERN_WARNING, cmd->device,
- "reset code %d for task tag 0x%lx\n",
+ "reset code %d for task tag 0x%llx\n",
rsp_rc, tsk_mgmt->task_tag);
return FAILED;
}
if (res && ipr_is_gata(res)) {
if (cmd == HDIO_GET_IDENTITY)
return -ENOTTY;
- return ata_scsi_ioctl(sdev, cmd, arg);
+ return ata_sas_scsi_ioctl(res->sata_port->ap, sdev, cmd, arg);
}
return -EINVAL;
struct iscsi_segment *segment, int recv,
unsigned copied)
{
- static unsigned char padbuf[ISCSI_PAD_LEN];
struct scatterlist sg;
unsigned int pad;
debug_tcp("consume %d pad bytes\n", pad);
segment->total_size += pad;
segment->size = pad;
- segment->data = padbuf;
+ segment->data = segment->padbuf;
return 0;
}
}
struct domain_device *dev = sdev_to_domain_dev(sdev);
if (dev_is_sata(dev))
- return ata_scsi_ioctl(sdev, cmd, arg);
+ return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg);
return -EINVAL;
}
if (tag != dev->tag)
dev_err(&dev->sbd.core,
- "%s:%u: tag mismatch, got %lx, expected %lx\n",
+ "%s:%u: tag mismatch, got %llx, expected %llx\n",
__func__, __LINE__, tag, dev->tag);
if (res) {
- dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+ dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
__func__, __LINE__, res, status);
return IRQ_HANDLED;
}
if (dev->blk_size != CD_FRAMESIZE) {
dev_err(&dev->sbd.core,
- "%s:%u: cannot handle block size %lu\n", __func__,
+ "%s:%u: cannot handle block size %llu\n", __func__,
__LINE__, dev->blk_size);
return -EINVAL;
}
{
int rval;
unsigned long flags = 0;
- int cnt;
+ int cnt, que;
struct qla_hw_data *ha = vha->hw;
- struct req_que *req = ha->req_q_map[0];
- struct rsp_que *rsp = ha->rsp_q_map[0];
+ struct req_que *req;
+ struct rsp_que *rsp;
+ struct scsi_qla_host *vp;
struct mid_init_cb_24xx *mid_init_cb =
(struct mid_init_cb_24xx *) ha->init_cb;
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Clear outstanding commands array. */
- for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
- req->outstanding_cmds[cnt] = NULL;
+ for (que = 0; que < ha->max_queues; que++) {
+ req = ha->req_q_map[que];
+ if (!req)
+ continue;
+ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+ req->outstanding_cmds[cnt] = NULL;
- req->current_outstanding_cmd = 0;
+ req->current_outstanding_cmd = 0;
- /* Clear RSCN queue. */
- vha->rscn_in_ptr = 0;
- vha->rscn_out_ptr = 0;
+ /* Initialize firmware. */
+ req->ring_ptr = req->ring;
+ req->ring_index = 0;
+ req->cnt = req->length;
+ }
- /* Initialize firmware. */
- req->ring_ptr = req->ring;
- req->ring_index = 0;
- req->cnt = req->length;
- rsp->ring_ptr = rsp->ring;
- rsp->ring_index = 0;
+ for (que = 0; que < ha->max_queues; que++) {
+ rsp = ha->rsp_q_map[que];
+ if (!rsp)
+ continue;
+ rsp->ring_ptr = rsp->ring;
+ rsp->ring_index = 0;
- /* Initialize response queue entries */
- qla2x00_init_response_q_entries(rsp);
+ /* Initialize response queue entries */
+ qla2x00_init_response_q_entries(rsp);
+ }
+ /* Clear RSCN queue. */
+ list_for_each_entry(vp, &ha->vp_list, list) {
+ vp->rscn_in_ptr = 0;
+ vp->rscn_out_ptr = 0;
+ }
ha->isp_ops->config_rings(vha);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
int rval = QLA_SUCCESS;
uint32_t wait_time;
struct qla_hw_data *ha = vha->hw;
- struct req_que *req = ha->req_q_map[0];
- struct rsp_que *rsp = ha->rsp_q_map[0];
+ struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+ struct rsp_que *rsp = req->rsp;
atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
}
req = ha->req_q_map[i];
if (req) {
+ /* Clear outstanding commands array. */
req->options &= ~BIT_0;
ret = qla25xx_init_req_que(base_vha, req, req->options);
if (ret != QLA_SUCCESS)
req->id));
else
DEBUG2_17(printk(KERN_WARNING
- "%s Rsp que:%d inited\n", __func__,
+ "%s Req que:%d inited\n", __func__,
req->id));
}
}
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
- struct req_que *req = ha->req_q_map[0];
- struct rsp_que *rsp = ha->rsp_q_map[0];
+ struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+ struct rsp_que *rsp = req->rsp;
if (!vha->vp_idx)
return -EINVAL;
req->ring_index = 0;
req->cnt = req->length;
req->id = que_id;
+ req->max_q_depth = ha->req_q_map[0]->max_q_depth;
mutex_unlock(&ha->vport_lock);
ret = qla25xx_init_req_que(base_vha, req, options);
struct req_que *req;
spin_lock_irqsave(&ha->hardware_lock, flags);
- for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
- req = ha->req_q_map[vha->req_ques[que]];
+ for (que = 0; que < ha->max_queues; que++) {
+ req = ha->req_q_map[que];
if (!req)
continue;
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct qla_hw_data *ha = vha->hw;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
- struct req_que *req = ha->req_q_map[0];
+ struct req_que *req = ha->req_q_map[vha->req_ques[0]];
if (sdev->tagged_supported)
scsi_activate_tcq(sdev, req->max_q_depth);
return 0;
probe_failed:
- qla2x00_free_que(ha, req, rsp);
qla2x00_free_device(base_vha);
scsi_host_put(base_vha->host);
* Description: Looks up the scsi_device with the specified @lun for a given
* @starget. The returned scsi_device does not have an additional
* reference. You must hold the host's host_lock over this call and
- * any access to the returned scsi_device.
+ * any access to the returned scsi_device. A scsi_device in state
+ * SDEV_DEL is skipped.
*
* Note: The only reason why drivers should use this is because
* they need to access the device list in irq context. Otherwise you
struct scsi_device *sdev;
list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
+ if (sdev->sdev_state == SDEV_DEL)
+ continue;
if (sdev->lun ==lun)
return sdev;
}
{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+ {"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
{"SONY", "TSL", NULL, BLIST_FORCELUN}, /* DDS3 & DDS4 autoloaders */
p->flags = port->flags;
p->mapbase = port->mapbase;
p->private_data = port->private_data;
+ p->type = port->type;
+ p->line = port->line;
set_io_from_upio(p);
if (port->serial_in)
/* subdevice 0x00PS means <P> parallel, <S> serial */
unsigned int num_serial = dev->subsystem_device & 0xf;
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+ dev->subsystem_device == 0x0299)
+ return 0;
+
if (num_serial == 0)
return -ENODEV;
return num_serial;
0,
pbn_b0_8_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ PCI_VENDOR_ID_IBM, 0x0299,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
{ "RSS0250", 0 },
/* SupraExpress 28.8 Data/Fax PnP modem */
{ "SUP1310", 0 },
+ /* SupraExpress 336i PnP Voice Modem */
+ { "SUP1381", 0 },
/* SupraExpress 33.6 Data/Fax PnP modem */
{ "SUP1421", 0 },
/* SupraExpress 33.6 Data/Fax PnP modem */
/* disable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
- if (!uart_circ_empty(xmit)) {
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
+ { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
- ch = serial_in(sport, PNX8XXX_FIFO);
+ ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
sport->port.icount.rx++;
* out of the main execution path
*/
if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
- PNX8XXX_UART_FIFO_RXPAR) |
+ PNX8XXX_UART_FIFO_RXPAR |
+ PNX8XXX_UART_FIFO_RXBRK) |
ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
- if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
+ if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
+ status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
+ FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
+ sport->port.icount.brk++;
+ if (uart_handle_break(&sport->port))
+ goto ignore_char;
+ } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
sport->port.icount.parity++;
else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
sport->port.icount.frame++;
/* Get the interrupts */
status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
- /* Break signal received */
- if (status & PNX8XXX_UART_INT_BREAK) {
- sport->port.icount.brk++;
- uart_handle_break(&sport->port);
- }
-
- /* Byte received */
- if (status & PNX8XXX_UART_INT_RX)
+ /* Byte or break signal received */
+ if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
pnx8xxx_rx_chars(sport);
/* TX holding register empty - transmit a byte */
dev_dbg(controller, "new message %p submitted for %s\n",
msg, spi->dev.bus_id);
- if (unlikely(list_empty(&msg->transfers)
- || !spi->max_speed_hz))
+ if (unlikely(list_empty(&msg->transfers)))
return -EINVAL;
if (as->stopping)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_spi.h>
+
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/io.h>
-#include <syslib/virtex_devices.h>
-
#define XILINX_SPI_NAME "xilinx_spi"
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
struct spi_transfer *t)
{
u8 bits_per_word;
- u32 hz;
- struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
- hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
return -EINVAL;
}
- if (hz && xspi->speed_hz > hz) {
- dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
- __func__, hz);
- return -EINVAL;
- }
-
return 0;
}
return IRQ_HANDLED;
}
-static int __init xilinx_spi_probe(struct platform_device *dev)
+static int __init xilinx_spi_of_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
{
- int ret = 0;
struct spi_master *master;
struct xilinx_spi *xspi;
- struct xspi_platform_data *pdata;
- struct resource *r;
+ struct resource r_irq_struct;
+ struct resource r_mem_struct;
+
+ struct resource *r_irq = &r_irq_struct;
+ struct resource *r_mem = &r_mem_struct;
+ int rc = 0;
+ const u32 *prop;
+ int len;
/* Get resources(memory, IRQ) associated with the device */
- master = spi_alloc_master(&dev->dev, sizeof(struct xilinx_spi));
+ master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
if (master == NULL) {
return -ENOMEM;
}
- platform_set_drvdata(dev, master);
- pdata = dev->dev.platform_data;
+ dev_set_drvdata(&ofdev->dev, master);
- if (pdata == NULL) {
- ret = -ENODEV;
+ rc = of_address_to_resource(ofdev->node, 0, r_mem);
+ if (rc) {
+ dev_warn(&ofdev->dev, "invalid address\n");
goto put_master;
}
- r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- ret = -ENODEV;
+ rc = of_irq_to_resource(ofdev->node, 0, r_irq);
+ if (rc == NO_IRQ) {
+ dev_warn(&ofdev->dev, "no IRQ found\n");
goto put_master;
}
xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
- if (!request_mem_region(r->start,
- r->end - r->start + 1, XILINX_SPI_NAME)) {
- ret = -ENXIO;
+ xspi->irq = r_irq->start;
+
+ if (!request_mem_region(r_mem->start,
+ r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
+ rc = -ENXIO;
+ dev_warn(&ofdev->dev, "memory request failure\n");
goto put_master;
}
- xspi->regs = ioremap(r->start, r->end - r->start + 1);
+ xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
if (xspi->regs == NULL) {
- ret = -ENOMEM;
+ rc = -ENOMEM;
+ dev_warn(&ofdev->dev, "ioremap failure\n");
goto put_master;
}
+ xspi->irq = r_irq->start;
- ret = platform_get_irq(dev, 0);
- if (ret < 0) {
- ret = -ENXIO;
- goto unmap_io;
- }
- xspi->irq = ret;
+ /* dynamic bus assignment */
+ master->bus_num = -1;
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
- xspi->speed_hz = pdata->speed_hz;
+ /* number of slave select bits is required */
+ prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
+ if (!prop || len < sizeof(*prop)) {
+ dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
+ goto put_master;
+ }
+ master->num_chipselect = *prop;
/* SPI controller initializations */
xspi_init_hw(xspi->regs);
/* Register for SPI Interrupt */
- ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
- if (ret != 0)
+ rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+ if (rc != 0) {
+ dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
goto unmap_io;
+ }
- ret = spi_bitbang_start(&xspi->bitbang);
- if (ret != 0) {
- dev_err(&dev->dev, "spi_bitbang_start FAILED\n");
+ rc = spi_bitbang_start(&xspi->bitbang);
+ if (rc != 0) {
+ dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
goto free_irq;
}
- dev_info(&dev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
- r->start, (u32)xspi->regs, xspi->irq);
+ dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
+ (unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
- return ret;
+ /* Add any subnodes on the SPI bus */
+ of_register_spi_devices(master, ofdev->node);
+
+ return rc;
free_irq:
free_irq(xspi->irq, xspi);
iounmap(xspi->regs);
put_master:
spi_master_put(master);
- return ret;
+ return rc;
}
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
+static int __devexit xilinx_spi_remove(struct of_device *ofdev)
{
struct xilinx_spi *xspi;
struct spi_master *master;
- master = platform_get_drvdata(dev);
+ master = platform_get_drvdata(ofdev);
xspi = spi_master_get_devdata(master);
spi_bitbang_stop(&xspi->bitbang);
free_irq(xspi->irq, xspi);
iounmap(xspi->regs);
- platform_set_drvdata(dev, 0);
+ dev_set_drvdata(&ofdev->dev, 0);
spi_master_put(xspi->bitbang.master);
return 0;
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:" XILINX_SPI_NAME);
-static struct platform_driver xilinx_spi_driver = {
- .probe = xilinx_spi_probe,
- .remove = __devexit_p(xilinx_spi_remove),
+static int __exit xilinx_spi_of_remove(struct of_device *op)
+{
+ return xilinx_spi_remove(op);
+}
+
+static struct of_device_id xilinx_spi_of_match[] = {
+ { .compatible = "xlnx,xps-spi-2.00.a", },
+ { .compatible = "xlnx,xps-spi-2.00.b", },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+
+static struct of_platform_driver xilinx_spi_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "xilinx-xps-spi",
+ .match_table = xilinx_spi_of_match,
+ .probe = xilinx_spi_of_probe,
+ .remove = __exit_p(xilinx_spi_of_remove),
.driver = {
- .name = XILINX_SPI_NAME,
+ .name = "xilinx-xps-spi",
.owner = THIS_MODULE,
},
};
static int __init xilinx_spi_init(void)
{
- return platform_driver_register(&xilinx_spi_driver);
+ return of_register_platform_driver(&xilinx_spi_of_driver);
}
module_init(xilinx_spi_init);
static void __exit xilinx_spi_exit(void)
{
- platform_driver_unregister(&xilinx_spi_driver);
+ of_unregister_platform_driver(&xilinx_spi_of_driver);
}
module_exit(xilinx_spi_exit);
-
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
MODULE_LICENSE("GPL");
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- err = usb_port_suspend(udev);
+ err = usb_port_suspend(udev, PMSG_SUSPEND);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
spin_unlock_irqrestore(&priv->rx_lock, flags);
dbg("%s - deferring remainder until unthrottled",
__func__);
- return;
+ goto out;
}
spin_unlock_irqrestore(&priv->rx_lock, flags);
/* if the port is closed stop trying to read */
struct fb_info *info)
{
- if (var->bits_per_pixel != LCD_BPP) {
+ switch (var->bits_per_pixel) {
+ case 24:/* TRUECOLOUR, 16m */
+ var->red.offset = 16;
+ var->green.offset = 8;
+ var->blue.offset = 0;
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ break;
+ default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
struct fb_info *info)
{
- if (var->bits_per_pixel != LCD_BPP) {
+ switch (var->bits_per_pixel) {
+ case 24:/* TRUECOLOUR, 16m */
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
+ var->red.length = var->green.length = var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ break;
+ default:
pr_debug("%s: depth not supported: %u BPP\n", __func__,
var->bits_per_pixel);
return -EINVAL;
__func__, status);
return -ENXIO;
}
- dev_dbg(dev, "video:%p ioif:%lx lpar:%lx size:%lx\n",
+ dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
ps3fb_videomemory.size);
__func__, status);
goto err;
}
- dev_dbg(&dev->core, "ddr:lpar:0x%lx\n", ddr_lpar);
+ dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
status = lv1_gpu_context_allocate(ps3fb.memory_handle, 0,
&ps3fb.context_handle,
* pointer is passed for ctxp. Will fail with -ENOSYS if not
* implemented.
*/
-asmlinkage long sys_io_setup(unsigned nr_events, aio_context_t __user *ctxp)
+SYSCALL_DEFINE2(io_setup, unsigned, nr_events, aio_context_t __user *, ctxp)
{
struct kioctx *ioctx = NULL;
unsigned long ctx;
* implemented. May fail with -EFAULT if the context pointed to
* is invalid.
*/
-asmlinkage long sys_io_destroy(aio_context_t ctx)
+SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx)
{
struct kioctx *ioctx = lookup_ioctx(ctx);
if (likely(NULL != ioctx)) {
* are available to queue any iocbs. Will return 0 if nr is 0. Will
* fail with -ENOSYS if not implemented.
*/
-asmlinkage long sys_io_submit(aio_context_t ctx_id, long nr,
- struct iocb __user * __user *iocbpp)
+SYSCALL_DEFINE3(io_submit, aio_context_t, ctx_id, long, nr,
+ struct iocb __user * __user *, iocbpp)
{
struct kioctx *ctx;
long ret = 0;
* invalid. May fail with -EAGAIN if the iocb specified was not
* cancelled. Will fail with -ENOSYS if not implemented.
*/
-asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
- struct io_event __user *result)
+SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb,
+ struct io_event __user *, result)
{
int (*cancel)(struct kiocb *iocb, struct io_event *res);
struct kioctx *ctx;
* will be updated if not NULL and the operation blocks. Will fail
* with -ENOSYS if not implemented.
*/
-asmlinkage long sys_io_getevents(aio_context_t ctx_id,
- long min_nr,
- long nr,
- struct io_event __user *events,
- struct timespec __user *timeout)
+SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
+ long, min_nr,
+ long, nr,
+ struct io_event __user *, events,
+ struct timespec __user *, timeout)
{
struct kioctx *ioctx = lookup_ioctx(ctx_id);
long ret = -EINVAL;
#define BTRFS_IOCTL_MAGIC 0x94
#define BTRFS_VOL_NAME_MAX 255
-#define BTRFS_PATH_NAME_MAX 3072
+#define BTRFS_PATH_NAME_MAX 4087
+/* this should be 4k */
struct btrfs_ioctl_vol_args {
__s64 fd;
char name[BTRFS_PATH_NAME_MAX + 1];
};
+struct btrfs_ioctl_clone_range_args {
+ __s64 src_fd;
+ __u64 src_offset, src_length;
+ __u64 dest_offset;
+};
+
#define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \
struct btrfs_ioctl_vol_args)
#define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \
struct btrfs_ioctl_vol_args)
#define BTRFS_IOC_BALANCE _IOW(BTRFS_IOCTL_MAGIC, 12, \
struct btrfs_ioctl_vol_args)
-struct btrfs_ioctl_clone_range_args {
- __s64 src_fd;
- __u64 src_offset, src_length;
- __u64 dest_offset;
-};
#define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \
struct btrfs_ioctl_clone_range_args)
#include <linux/namei.h>
#include <linux/miscdevice.h>
#include <linux/version.h>
+#include <linux/magic.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
#include "export.h"
#include "compression.h"
-#define BTRFS_SUPER_MAGIC 0x9123683E
static struct super_operations btrfs_super_ops;
{
struct btrfs_ioctl_vol_args *vol;
struct btrfs_fs_devices *fs_devices;
- int ret = 0;
+ int ret = -ENOTTY;
int len;
if (!capable(CAP_SYS_ADMIN))
goto out;
}
len = strnlen(vol->name, BTRFS_PATH_NAME_MAX);
+
switch (cmd) {
case BTRFS_IOC_SCAN_DEV:
ret = btrfs_scan_one_device(vol->name, FMODE_READ,
tail->bi_next = old_head;
else
device->pending_bio_tail = tail;
+ device->running_pending = 0;
spin_unlock(&device->io_lock);
btrfs_requeue_work(&device->work);
* Use of bdflush() is deprecated and will be removed in a future kernel.
* The `pdflush' kernel threads fully replace bdflush daemons and this call.
*/
-asmlinkage long sys_bdflush(int func, long data)
+SYSCALL_DEFINE2(bdflush, int, func, long, data)
{
static int msg_count;
}
#ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
+static long do_compat_pselect(int n, compat_ulong_t __user *inp,
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
struct compat_timespec __user *tsp, compat_sigset_t __user *sigmask,
compat_size_t sigsetsize)
(compat_size_t __user *)(sig+sizeof(up))))
return -EFAULT;
}
- return compat_sys_pselect7(n, inp, outp, exp, tsp, compat_ptr(up),
- sigsetsize);
+ return do_compat_pselect(n, inp, outp, exp, tsp, compat_ptr(up),
+ sigsetsize);
}
asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
* return NULL;
* }
*/
-asmlinkage long sys_getcwd(char __user *buf, unsigned long size)
+SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
{
int error;
struct path pwd, root;
/* And here is where the userspace process can look up the cookie value
* to retrieve the path.
*/
-asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user * buf, size_t len)
+SYSCALL_DEFINE(lookup_dcookie)(u64 cookie64, char __user * buf, size_t len)
{
unsigned long cookie = (unsigned long)cookie64;
int err = -EINVAL;
mutex_unlock(&dcookie_mutex);
return err;
}
-
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_lookup_dcookie(u64 cookie64, long buf, long len)
+{
+ return SYSC_lookup_dcookie(cookie64, (char __user *) buf, (size_t) len);
+}
+SYSCALL_ALIAS(sys_lookup_dcookie, SyS_lookup_dcookie);
+#endif
static int dcookie_init(void)
{
return file;
}
-asmlinkage long sys_eventfd2(unsigned int count, int flags)
+SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
{
int fd;
struct eventfd_ctx *ctx;
return fd;
}
-asmlinkage long sys_eventfd(unsigned int count)
+SYSCALL_DEFINE1(eventfd, unsigned int, count)
{
return sys_eventfd2(count, 0);
}
-
/*
* Open an eventpoll file descriptor.
*/
-asmlinkage long sys_epoll_create1(int flags)
+SYSCALL_DEFINE1(epoll_create1, int, flags)
{
int error, fd = -1;
struct eventpoll *ep;
return fd;
}
-asmlinkage long sys_epoll_create(int size)
+SYSCALL_DEFINE1(epoll_create, int, size)
{
if (size < 0)
return -EINVAL;
* the eventpoll file that enables the insertion/removal/change of
* file descriptors inside the interest set.
*/
-asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
- struct epoll_event __user *event)
+SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd,
+ struct epoll_event __user *, event)
{
int error;
struct file *file, *tfile;
* Implement the event wait interface for the eventpoll file. It is the kernel
* part of the user space epoll_wait(2).
*/
-asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
- int maxevents, int timeout)
+SYSCALL_DEFINE4(epoll_wait, int, epfd, struct epoll_event __user *, events,
+ int, maxevents, int, timeout)
{
int error;
struct file *file;
* Implement the event wait interface for the eventpoll file. It is the kernel
* part of the user space epoll_pwait(2).
*/
-asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
- int maxevents, int timeout, const sigset_t __user *sigmask,
- size_t sigsetsize)
+SYSCALL_DEFINE6(epoll_pwait, int, epfd, struct epoll_event __user *, events,
+ int, maxevents, int, timeout, const sigset_t __user *, sigmask,
+ size_t, sigsetsize)
{
int error;
sigset_t ksigmask, sigsaved;
*
* Also note that we take the address to load from from the file itself.
*/
-asmlinkage long sys_uselib(const char __user * library)
+SYSCALL_DEFINE1(uselib, const char __user *, library)
{
struct file *file;
struct nameidata nd;
mark_inode_dirty(dir);
}
- if (IS_DIRSYNC(dir))
+ if (IS_DIRSYNC(dir)) {
err = write_one_page(page, 1);
- else
+ if (!err)
+ err = ext2_sync_inode(dir);
+ } else {
unlock_page(page);
+ }
return err;
}
return res;
}
-asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
+SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags)
{
int err = -EBADF;
struct file * file, *tofree;
return err;
}
-asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
{
if (unlikely(newfd == oldfd)) { /* corner case */
struct files_struct *files = current->files;
return sys_dup3(oldfd, newfd, 0);
}
-asmlinkage long sys_dup(unsigned int fildes)
+SYSCALL_DEFINE1(dup, unsigned int, fildes)
{
int ret = -EBADF;
struct file *file = fget(fildes);
return err;
}
-asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
{
struct file *filp;
long err = -EBADF;
}
#if BITS_PER_LONG == 32
-asmlinkage long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl64, unsigned int, fd, unsigned int, cmd,
+ unsigned long, arg)
{
struct file * filp;
long err;
/*
* Whee.. Weird sysv syscall.
*/
-asmlinkage long sys_sysfs(int option, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2)
{
int retval = -EINVAL;
return error;
}
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
{
struct file *filp;
int error = -EBADF;
}
EXPORT_SYMBOL_GPL(set_task_ioprio);
-asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
+SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
{
int class = IOPRIO_PRIO_CLASS(ioprio);
int data = IOPRIO_PRIO_DATA(ioprio);
return aprio;
}
-asmlinkage long sys_ioprio_get(int which, int who)
+SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
{
struct task_struct *g, *p;
struct user_struct *user;
read_unlock(&tasklist_lock);
return ret;
}
-
* %LOCK_MAND can be combined with %LOCK_READ or %LOCK_WRITE to allow other
* processes read and write access respectively.
*/
-asmlinkage long sys_flock(unsigned int fd, unsigned int cmd)
+SYSCALL_DEFINE2(flock, unsigned int, fd, unsigned int, cmd)
{
struct file *filp;
struct file_lock *lock;
}
}
-asmlinkage long sys_mknodat(int dfd, const char __user *filename, int mode,
- unsigned dev)
+SYSCALL_DEFINE4(mknodat, int, dfd, const char __user *, filename, int, mode,
+ unsigned, dev)
{
int error;
char *tmp;
return error;
}
-asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
+SYSCALL_DEFINE3(mknod, const char __user *, filename, int, mode, unsigned, dev)
{
return sys_mknodat(AT_FDCWD, filename, mode, dev);
}
return error;
}
-asmlinkage long sys_mkdirat(int dfd, const char __user *pathname, int mode)
+SYSCALL_DEFINE3(mkdirat, int, dfd, const char __user *, pathname, int, mode)
{
int error = 0;
char * tmp;
return error;
}
-asmlinkage long sys_mkdir(const char __user *pathname, int mode)
+SYSCALL_DEFINE2(mkdir, const char __user *, pathname, int, mode)
{
return sys_mkdirat(AT_FDCWD, pathname, mode);
}
return error;
}
-asmlinkage long sys_rmdir(const char __user *pathname)
+SYSCALL_DEFINE1(rmdir, const char __user *, pathname)
{
return do_rmdir(AT_FDCWD, pathname);
}
goto exit2;
}
-asmlinkage long sys_unlinkat(int dfd, const char __user *pathname, int flag)
+SYSCALL_DEFINE3(unlinkat, int, dfd, const char __user *, pathname, int, flag)
{
if ((flag & ~AT_REMOVEDIR) != 0)
return -EINVAL;
return do_unlinkat(dfd, pathname);
}
-asmlinkage long sys_unlink(const char __user *pathname)
+SYSCALL_DEFINE1(unlink, const char __user *, pathname)
{
return do_unlinkat(AT_FDCWD, pathname);
}
return error;
}
-asmlinkage long sys_symlinkat(const char __user *oldname,
- int newdfd, const char __user *newname)
+SYSCALL_DEFINE3(symlinkat, const char __user *, oldname,
+ int, newdfd, const char __user *, newname)
{
int error;
char *from;
return error;
}
-asmlinkage long sys_symlink(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(symlink, const char __user *, oldname, const char __user *, newname)
{
return sys_symlinkat(oldname, AT_FDCWD, newname);
}
* with linux 2.0, and to avoid hard-linking to directories
* and other special files. --ADM
*/
-asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname,
- int flags)
+SYSCALL_DEFINE5(linkat, int, olddfd, const char __user *, oldname,
+ int, newdfd, const char __user *, newname, int, flags)
{
struct dentry *new_dentry;
struct nameidata nd;
return error;
}
-asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(link, const char __user *, oldname, const char __user *, newname)
{
return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
return error;
}
-asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
- int newdfd, const char __user *newname)
+SYSCALL_DEFINE4(renameat, int, olddfd, const char __user *, oldname,
+ int, newdfd, const char __user *, newname)
{
struct dentry *old_dir, *new_dir;
struct dentry *old_dentry, *new_dentry;
return error;
}
-asmlinkage long sys_rename(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(rename, const char __user *, oldname, const char __user *, newname)
{
return sys_renameat(AT_FDCWD, oldname, AT_FDCWD, newname);
}
* unixes. Our API is identical to OSF/1 to avoid making a mess of AMD
*/
-asmlinkage long sys_umount(char __user * name, int flags)
+SYSCALL_DEFINE2(umount, char __user *, name, int, flags)
{
struct path path;
int retval;
/*
* The 2.0 compatible umount. No flags.
*/
-asmlinkage long sys_oldumount(char __user * name)
+SYSCALL_DEFINE1(oldumount, char __user *, name)
{
return sys_umount(name, 0);
}
return new_ns;
}
-asmlinkage long sys_mount(char __user * dev_name, char __user * dir_name,
- char __user * type, unsigned long flags,
- void __user * data)
+SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
+ char __user *, type, unsigned long, flags, void __user *, data)
{
int retval;
unsigned long data_page;
* though, so you may need to say mount --bind /nfs/my_root /nfs/my_root
* first.
*/
-asmlinkage long sys_pivot_root(const char __user * new_root,
- const char __user * put_old)
+SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
+ const char __user *, put_old)
{
struct vfsmount *tmp;
struct path new, old, parent_path, root_parent, root;
},
};
-long
-asmlinkage sys_nfsservctl(int cmd, struct nfsctl_arg __user *arg, void __user *res)
+SYSCALL_DEFINE3(nfsservctl, int, cmd, struct nfsctl_arg __user *, arg,
+ void __user *, res)
{
struct file *file;
void __user *p = &arg->u;
.destroy_watch = free_inotify_user_watch,
};
-asmlinkage long sys_inotify_init1(int flags)
+SYSCALL_DEFINE1(inotify_init1, int, flags)
{
struct inotify_device *dev;
struct inotify_handle *ih;
return ret;
}
-asmlinkage long sys_inotify_init(void)
+SYSCALL_DEFINE0(inotify_init)
{
return sys_inotify_init1(0);
}
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *pathname, u32 mask)
+SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
+ u32, mask)
{
struct inode *inode;
struct inotify_device *dev;
return ret;
}
-asmlinkage long sys_inotify_rm_watch(int fd, __s32 wd)
+SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
{
struct file *filp;
struct inotify_device *dev;
return 0;
}
-asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * buf)
+SYSCALL_DEFINE2(statfs, const char __user *, pathname, struct statfs __user *, buf)
{
struct path path;
int error;
return error;
}
-
-asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(statfs64, const char __user *, pathname, size_t, sz, struct statfs64 __user *, buf)
{
struct path path;
long error;
return error;
}
-
-asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user * buf)
+SYSCALL_DEFINE2(fstatfs, unsigned int, fd, struct statfs __user *, buf)
{
struct file * file;
struct statfs tmp;
return error;
}
-asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(fstatfs64, unsigned int, fd, size_t, sz, struct statfs64 __user *, buf)
{
struct file * file;
struct statfs64 tmp;
return error;
}
-asmlinkage long sys_truncate(const char __user * path, unsigned long length)
+SYSCALL_DEFINE2(truncate, const char __user *, path, unsigned long, length)
{
/* on 32-bit boxen it will cut the range 2^31--2^32-1 off */
return do_sys_truncate(path, (long)length);
return error;
}
-asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length)
+SYSCALL_DEFINE2(ftruncate, unsigned int, fd, unsigned long, length)
{
long ret = do_sys_ftruncate(fd, length, 1);
/* avoid REGPARM breakage on x86: */
/* LFS versions of truncate are only needed on 32 bit machines */
#if BITS_PER_LONG == 32
-asmlinkage long sys_truncate64(const char __user * path, loff_t length)
+SYSCALL_DEFINE(truncate64)(const char __user * path, loff_t length)
{
return do_sys_truncate(path, length);
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_truncate64(long path, loff_t length)
+{
+ return SYSC_truncate64((const char __user *) path, length);
+}
+SYSCALL_ALIAS(sys_truncate64, SyS_truncate64);
+#endif
-asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length)
+SYSCALL_DEFINE(ftruncate64)(unsigned int fd, loff_t length)
{
long ret = do_sys_ftruncate(fd, length, 0);
/* avoid REGPARM breakage on x86: */
asmlinkage_protect(2, ret, fd, length);
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_ftruncate64(long fd, loff_t length)
+{
+ return SYSC_ftruncate64((unsigned int) fd, length);
+}
+SYSCALL_ALIAS(sys_ftruncate64, SyS_ftruncate64);
#endif
+#endif /* BITS_PER_LONG == 32 */
-asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len)
+SYSCALL_DEFINE(fallocate)(int fd, int mode, loff_t offset, loff_t len)
{
struct file *file;
struct inode *inode;
out:
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fallocate(long fd, long mode, loff_t offset, loff_t len)
+{
+ return SYSC_fallocate((int)fd, (int)mode, offset, len);
+}
+SYSCALL_ALIAS(sys_fallocate, SyS_fallocate);
+#endif
/*
* access() needs to use the real uid/gid, not the effective uid/gid.
* We do this by temporarily clearing all FS-related capabilities and
* switching the fsuid/fsgid around to the real ones.
*/
-asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
+SYSCALL_DEFINE3(faccessat, int, dfd, const char __user *, filename, int, mode)
{
const struct cred *old_cred;
struct cred *override_cred;
return res;
}
-asmlinkage long sys_access(const char __user *filename, int mode)
+SYSCALL_DEFINE2(access, const char __user *, filename, int, mode)
{
return sys_faccessat(AT_FDCWD, filename, mode);
}
-asmlinkage long sys_chdir(const char __user * filename)
+SYSCALL_DEFINE1(chdir, const char __user *, filename)
{
struct path path;
int error;
return error;
}
-asmlinkage long sys_fchdir(unsigned int fd)
+SYSCALL_DEFINE1(fchdir, unsigned int, fd)
{
struct file *file;
struct inode *inode;
return error;
}
-asmlinkage long sys_chroot(const char __user * filename)
+SYSCALL_DEFINE1(chroot, const char __user *, filename)
{
struct path path;
int error;
return error;
}
-asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
+SYSCALL_DEFINE2(fchmod, unsigned int, fd, mode_t, mode)
{
struct inode * inode;
struct dentry * dentry;
return err;
}
-asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
- mode_t mode)
+SYSCALL_DEFINE3(fchmodat, int, dfd, const char __user *, filename, mode_t, mode)
{
struct path path;
struct inode *inode;
return error;
}
-asmlinkage long sys_chmod(const char __user *filename, mode_t mode)
+SYSCALL_DEFINE2(chmod, const char __user *, filename, mode_t, mode)
{
return sys_fchmodat(AT_FDCWD, filename, mode);
}
return error;
}
-asmlinkage long sys_chown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(chown, const char __user *, filename, uid_t, user, gid_t, group)
{
struct path path;
int error;
return error;
}
-asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
- gid_t group, int flag)
+SYSCALL_DEFINE5(fchownat, int, dfd, const char __user *, filename, uid_t, user,
+ gid_t, group, int, flag)
{
struct path path;
int error = -EINVAL;
return error;
}
-asmlinkage long sys_lchown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(lchown, const char __user *, filename, uid_t, user, gid_t, group)
{
struct path path;
int error;
return error;
}
-
-asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group)
+SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
{
struct file * file;
int error = -EBADF;
return fd;
}
-asmlinkage long sys_open(const char __user *filename, int flags, int mode)
+SYSCALL_DEFINE3(open, const char __user *, filename, int, flags, int, mode)
{
long ret;
return ret;
}
-asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
- int mode)
+SYSCALL_DEFINE4(openat, int, dfd, const char __user *, filename, int, flags,
+ int, mode)
{
long ret;
* For backward compatibility? Maybe this should be moved
* into arch/i386 instead?
*/
-asmlinkage long sys_creat(const char __user * pathname, int mode)
+SYSCALL_DEFINE2(creat, const char __user *, pathname, int, mode)
{
return sys_open(pathname, O_CREAT | O_WRONLY | O_TRUNC, mode);
}
* releasing the fd. This ensures that one clone task can't release
* an fd while another clone is opening it.
*/
-asmlinkage long sys_close(unsigned int fd)
+SYSCALL_DEFINE1(close, unsigned int, fd)
{
struct file * filp;
struct files_struct *files = current->files;
spin_unlock(&files->file_lock);
return -EBADF;
}
-
EXPORT_SYMBOL(sys_close);
/*
* This routine simulates a hangup on the tty, to arrange that users
* are given clean terminals at login time.
*/
-asmlinkage long sys_vhangup(void)
+SYSCALL_DEFINE0(vhangup)
{
if (capable(CAP_SYS_TTY_CONFIG)) {
tty_vhangup_self();
* sys_pipe() is the normal C calling standard for creating
* a pipe. It's not the way Unix traditionally does this, though.
*/
-asmlinkage long __weak sys_pipe2(int __user *fildes, int flags)
+SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
{
int fd[2];
int error;
return error;
}
-asmlinkage long __weak sys_pipe(int __user *fildes)
+SYSCALL_DEFINE1(pipe, int __user *, fildes)
{
return sys_pipe2(fildes, 0);
}
* calls. Maybe we need to add the process quotas etc. in the future,
* but we probably should use rlimits for that.
*/
-asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special, qid_t id, void __user *addr)
+SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special,
+ qid_t, id, void __user *, addr)
{
uint cmds, type;
struct super_block *sb = NULL;
}
EXPORT_SYMBOL(vfs_llseek);
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset, unsigned int origin)
+SYSCALL_DEFINE3(lseek, unsigned int, fd, off_t, offset, unsigned int, origin)
{
off_t retval;
struct file * file;
}
#ifdef __ARCH_WANT_SYS_LLSEEK
-asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
- unsigned long offset_low, loff_t __user * result,
- unsigned int origin)
+SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high,
+ unsigned long, offset_low, loff_t __user *, result,
+ unsigned int, origin)
{
int retval;
struct file * file;
file->f_pos = pos;
}
-asmlinkage ssize_t sys_read(unsigned int fd, char __user * buf, size_t count)
+SYSCALL_DEFINE3(read, unsigned int, fd, char __user *, buf, size_t, count)
{
struct file *file;
ssize_t ret = -EBADF;
return ret;
}
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t count)
+SYSCALL_DEFINE3(write, unsigned int, fd, const char __user *, buf,
+ size_t, count)
{
struct file *file;
ssize_t ret = -EBADF;
return ret;
}
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
- size_t count, loff_t pos)
+SYSCALL_DEFINE(pread64)(unsigned int fd, char __user *buf,
+ size_t count, loff_t pos)
{
struct file *file;
ssize_t ret = -EBADF;
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pread64(long fd, long buf, long count, loff_t pos)
+{
+ return SYSC_pread64((unsigned int) fd, (char __user *) buf,
+ (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pread64, SyS_pread64);
+#endif
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
- size_t count, loff_t pos)
+SYSCALL_DEFINE(pwrite64)(unsigned int fd, const char __user *buf,
+ size_t count, loff_t pos)
{
struct file *file;
ssize_t ret = -EBADF;
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pwrite64(long fd, long buf, long count, loff_t pos)
+{
+ return SYSC_pwrite64((unsigned int) fd, (const char __user *) buf,
+ (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pwrite64, SyS_pwrite64);
+#endif
/*
* Reduce an iovec's length in-place. Return the resulting number of segments
EXPORT_SYMBOL(vfs_writev);
-asmlinkage ssize_t
-sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(readv, unsigned long, fd, const struct iovec __user *, vec,
+ unsigned long, vlen)
{
struct file *file;
ssize_t ret = -EBADF;
return ret;
}
-asmlinkage ssize_t
-sys_writev(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(writev, unsigned long, fd, const struct iovec __user *, vec,
+ unsigned long, vlen)
{
struct file *file;
ssize_t ret = -EBADF;
return retval;
}
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd, off_t __user *, offset, size_t, count)
{
loff_t pos;
off_t off;
return do_sendfile(out_fd, in_fd, NULL, count, 0);
}
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd, loff_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd, loff_t __user *, offset, size_t, count)
{
loff_t pos;
ssize_t ret;
return -EFAULT;
}
-asmlinkage long old_readdir(unsigned int fd, struct old_linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(old_readdir, unsigned int, fd,
+ struct old_linux_dirent __user *, dirent, unsigned int, count)
{
int error;
struct file * file;
return -EFAULT;
}
-asmlinkage long sys_getdents(unsigned int fd, struct linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents, unsigned int, fd,
+ struct linux_dirent __user *, dirent, unsigned int, count)
{
struct file * file;
struct linux_dirent __user * lastdirent;
return -EFAULT;
}
-asmlinkage long sys_getdents64(unsigned int fd, struct linux_dirent64 __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents64, unsigned int, fd,
+ struct linux_dirent64 __user *, dirent, unsigned int, count)
{
struct file * file;
struct linux_dirent64 __user * lastdirent;
return ret;
}
-asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, struct timeval __user *tvp)
+SYSCALL_DEFINE5(select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+ fd_set __user *, exp, struct timeval __user *, tvp)
{
struct timespec end_time, *to = NULL;
struct timeval tv;
}
#ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, struct timespec __user *tsp,
- const sigset_t __user *sigmask, size_t sigsetsize)
+static long do_pselect(int n, fd_set __user *inp, fd_set __user *outp,
+ fd_set __user *exp, struct timespec __user *tsp,
+ const sigset_t __user *sigmask, size_t sigsetsize)
{
sigset_t ksigmask, sigsaved;
struct timespec ts, end_time, *to = NULL;
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
- ret = core_sys_select(n, inp, outp, exp, &end_time);
+ ret = core_sys_select(n, inp, outp, exp, to);
ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
if (ret == -ERESTARTNOHAND) {
* which has a pointer to the sigset_t itself followed by a size_t containing
* the sigset size.
*/
-asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, struct timespec __user *tsp, void __user *sig)
+SYSCALL_DEFINE6(pselect6, int, n, fd_set __user *, inp, fd_set __user *, outp,
+ fd_set __user *, exp, struct timespec __user *, tsp,
+ void __user *, sig)
{
size_t sigsetsize = 0;
sigset_t __user *up = NULL;
return -EFAULT;
}
- return sys_pselect7(n, inp, outp, exp, tsp, up, sigsetsize);
+ return do_pselect(n, inp, outp, exp, tsp, up, sigsetsize);
}
#endif /* HAVE_SET_RESTORE_SIGMASK */
return ret;
}
-asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
- long timeout_msecs)
+SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
+ long, timeout_msecs)
{
struct timespec end_time, *to = NULL;
int ret;
}
#ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
- struct timespec __user *tsp, const sigset_t __user *sigmask,
- size_t sigsetsize)
+SYSCALL_DEFINE5(ppoll, struct pollfd __user *, ufds, unsigned int, nfds,
+ struct timespec __user *, tsp, const sigset_t __user *, sigmask,
+ size_t, sigsetsize)
{
sigset_t ksigmask, sigsaved;
struct timespec ts, end_time, *to = NULL;
.read = signalfd_read,
};
-asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
- size_t sizemask, int flags)
+SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask,
+ size_t, sizemask, int, flags)
{
sigset_t sigmask;
struct signalfd_ctx *ctx;
return ufd;
}
-asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask,
- size_t sizemask)
+SYSCALL_DEFINE3(signalfd, int, ufd, sigset_t __user *, user_mask,
+ size_t, sizemask)
{
return sys_signalfd4(ufd, user_mask, sizemask, 0);
}
* Currently we punt and implement it as a normal copy, see pipe_to_user().
*
*/
-asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
- unsigned long nr_segs, unsigned int flags)
+SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
+ unsigned long, nr_segs, unsigned int, flags)
{
struct file *file;
long error;
return error;
}
-asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
- int fd_out, loff_t __user *off_out,
- size_t len, unsigned int flags)
+SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
+ int, fd_out, loff_t __user *, off_out,
+ size_t, len, unsigned int, flags)
{
long error;
struct file *in, *out;
return ret;
}
-asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
+SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
{
struct file *in;
int error, fput_in;
#define SQUASHFS_CACHED_FRAGMENTS CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
#define SQUASHFS_MAJOR 4
#define SQUASHFS_MINOR 0
-#define SQUASHFS_MAGIC 0x73717368
#define SQUASHFS_START 0
/* size of metadata (inode and directory) blocks */
#include <linux/init.h>
#include <linux/module.h>
#include <linux/zlib.h>
+#include <linux/magic.h>
#include "squashfs_fs.h"
#include "squashfs_fs_sb.h"
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys_stat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
return error;
}
-asmlinkage long sys_lstat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
return error;
}
-asmlinkage long sys_fstat(unsigned int fd, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_fstat(fd, &stat);
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys_newstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
return error;
}
-asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
}
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
-asmlinkage long sys_newfstatat(int dfd, char __user *filename,
- struct stat __user *statbuf, int flag)
+SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename,
+ struct stat __user *, statbuf, int, flag)
{
struct kstat stat;
int error = -EINVAL;
}
#endif
-asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newfstat, unsigned int, fd, struct stat __user *, statbuf)
{
struct kstat stat;
int error = vfs_fstat(fd, &stat);
return error;
}
-asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
- char __user *buf, int bufsiz)
+SYSCALL_DEFINE4(readlinkat, int, dfd, const char __user *, pathname,
+ char __user *, buf, int, bufsiz)
{
struct path path;
int error;
return error;
}
-asmlinkage long sys_readlink(const char __user *path, char __user *buf,
- int bufsiz)
+SYSCALL_DEFINE3(readlink, const char __user *, path, char __user *, buf,
+ int, bufsiz)
{
return sys_readlinkat(AT_FDCWD, path, buf, bufsiz);
}
return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
}
-asmlinkage long sys_stat64(char __user * filename, struct stat64 __user * statbuf)
+SYSCALL_DEFINE2(stat64, char __user *, filename, struct stat64 __user *, statbuf)
{
struct kstat stat;
int error = vfs_stat(filename, &stat);
return error;
}
-asmlinkage long sys_lstat64(char __user * filename, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(lstat64, char __user *, filename, struct stat64 __user *, statbuf)
{
struct kstat stat;
int error = vfs_lstat(filename, &stat);
return error;
}
-asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(fstat64, unsigned long, fd, struct stat64 __user *, statbuf)
{
struct kstat stat;
int error = vfs_fstat(fd, &stat);
return error;
}
-asmlinkage long sys_fstatat64(int dfd, char __user *filename,
- struct stat64 __user *statbuf, int flag)
+SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename,
+ struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
int error = -EINVAL;
return NULL;
}
-asmlinkage long sys_ustat(unsigned dev, struct ustat __user * ubuf)
+SYSCALL_DEFINE2(ustat, unsigned, dev, struct ustat __user *, ubuf)
{
struct super_block *s;
struct ustat tmp;
laptop_sync_completion();
}
-asmlinkage long sys_sync(void)
+SYSCALL_DEFINE0(sync)
{
do_sync(1);
return 0;
return ret;
}
-asmlinkage long sys_fsync(unsigned int fd)
+SYSCALL_DEFINE1(fsync, unsigned int, fd)
{
return do_fsync(fd, 0);
}
-asmlinkage long sys_fdatasync(unsigned int fd)
+SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
{
return do_fsync(fd, 1);
}
* already-instantiated disk blocks, there are no guarantees here that the data
* will be available after a crash.
*/
-asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
- unsigned int flags)
+SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
+ unsigned int flags)
{
int ret;
struct file *file;
out:
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
+ long flags)
+{
+ return SYSC_sync_file_range((int) fd, offset, nbytes,
+ (unsigned int) flags);
+}
+SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
+#endif
/* It would be nice if people remember that not all the world's an i386
when they introduce new system calls */
-asmlinkage long sys_sync_file_range2(int fd, unsigned int flags,
- loff_t offset, loff_t nbytes)
+SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
+ loff_t offset, loff_t nbytes)
{
return sys_sync_file_range(fd, offset, nbytes, flags);
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range2(long fd, long flags,
+ loff_t offset, loff_t nbytes)
+{
+ return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
+ offset, nbytes);
+}
+SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);
+#endif
/*
* `endbyte' is inclusive
return file;
}
-asmlinkage long sys_timerfd_create(int clockid, int flags)
+SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags)
{
int ufd;
struct timerfd_ctx *ctx;
return ufd;
}
-asmlinkage long sys_timerfd_settime(int ufd, int flags,
- const struct itimerspec __user *utmr,
- struct itimerspec __user *otmr)
+SYSCALL_DEFINE4(timerfd_settime, int, ufd, int, flags,
+ const struct itimerspec __user *, utmr,
+ struct itimerspec __user *, otmr)
{
struct file *file;
struct timerfd_ctx *ctx;
return 0;
}
-asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr)
+SYSCALL_DEFINE2(timerfd_gettime, int, ufd, struct itimerspec __user *, otmr)
{
struct file *file;
struct timerfd_ctx *ctx;
* must be owner or have write permission.
* Else, update from *times, must be owner or super user.
*/
-asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times)
+SYSCALL_DEFINE2(utime, char __user *, filename, struct utimbuf __user *, times)
{
struct timespec tv[2];
return error;
}
-asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __user *utimes, int flags)
+SYSCALL_DEFINE4(utimensat, int, dfd, char __user *, filename,
+ struct timespec __user *, utimes, int, flags)
{
struct timespec tstimes[2];
return do_utimes(dfd, filename, utimes ? tstimes : NULL, flags);
}
-asmlinkage long sys_futimesat(int dfd, char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE3(futimesat, int, dfd, char __user *, filename,
+ struct timeval __user *, utimes)
{
struct timeval times[2];
struct timespec tstimes[2];
return do_utimes(dfd, filename, utimes ? tstimes : NULL, 0);
}
-asmlinkage long sys_utimes(char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE2(utimes, char __user *, filename,
+ struct timeval __user *, utimes)
{
return sys_futimesat(AT_FDCWD, filename, utimes);
}
return error;
}
-asmlinkage long
-sys_setxattr(const char __user *pathname, const char __user *name,
- const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(setxattr, const char __user *, pathname,
+ const char __user *, name, const void __user *, value,
+ size_t, size, int, flags)
{
struct path path;
int error;
return error;
}
-asmlinkage long
-sys_lsetxattr(const char __user *pathname, const char __user *name,
- const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(lsetxattr, const char __user *, pathname,
+ const char __user *, name, const void __user *, value,
+ size_t, size, int, flags)
{
struct path path;
int error;
return error;
}
-asmlinkage long
-sys_fsetxattr(int fd, const char __user *name, const void __user *value,
- size_t size, int flags)
+SYSCALL_DEFINE5(fsetxattr, int, fd, const char __user *, name,
+ const void __user *,value, size_t, size, int, flags)
{
struct file *f;
struct dentry *dentry;
return error;
}
-asmlinkage ssize_t
-sys_getxattr(const char __user *pathname, const char __user *name,
- void __user *value, size_t size)
+SYSCALL_DEFINE4(getxattr, const char __user *, pathname,
+ const char __user *, name, void __user *, value, size_t, size)
{
struct path path;
ssize_t error;
return error;
}
-asmlinkage ssize_t
-sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
- size_t size)
+SYSCALL_DEFINE4(lgetxattr, const char __user *, pathname,
+ const char __user *, name, void __user *, value, size_t, size)
{
struct path path;
ssize_t error;
return error;
}
-asmlinkage ssize_t
-sys_fgetxattr(int fd, const char __user *name, void __user *value, size_t size)
+SYSCALL_DEFINE4(fgetxattr, int, fd, const char __user *, name,
+ void __user *, value, size_t, size)
{
struct file *f;
ssize_t error = -EBADF;
return error;
}
-asmlinkage ssize_t
-sys_listxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(listxattr, const char __user *, pathname, char __user *, list,
+ size_t, size)
{
struct path path;
ssize_t error;
return error;
}
-asmlinkage ssize_t
-sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(llistxattr, const char __user *, pathname, char __user *, list,
+ size_t, size)
{
struct path path;
ssize_t error;
return error;
}
-asmlinkage ssize_t
-sys_flistxattr(int fd, char __user *list, size_t size)
+SYSCALL_DEFINE3(flistxattr, int, fd, char __user *, list, size_t, size)
{
struct file *f;
ssize_t error = -EBADF;
return vfs_removexattr(d, kname);
}
-asmlinkage long
-sys_removexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(removexattr, const char __user *, pathname,
+ const char __user *, name)
{
struct path path;
int error;
return error;
}
-asmlinkage long
-sys_lremovexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(lremovexattr, const char __user *, pathname,
+ const char __user *, name)
{
struct path path;
int error;
return error;
}
-asmlinkage long
-sys_fremovexattr(int fd, const char __user *name)
+SYSCALL_DEFINE2(fremovexattr, int, fd, const char __user *, name)
{
struct file *f;
struct dentry *dentry;
extern struct workqueue_struct *xfsdatad_workqueue;
extern mempool_t *xfs_ioend_pool;
-typedef void (*xfs_ioend_func_t)(void *);
-
/*
* xfs_ioend struct manages large extent writes for XFS.
* It can manage several multi-page bio's at once.
}
/*
- * Mapping of multi-page buffers into contiguous virtual space
- */
-
-typedef struct a_list {
- void *vm_addr;
- struct a_list *next;
-} a_list_t;
-
-static a_list_t *as_free_head;
-static int as_list_len;
-static DEFINE_SPINLOCK(as_lock);
-
-/*
- * Try to batch vunmaps because they are costly.
- */
-STATIC void
-free_address(
- void *addr)
-{
- a_list_t *aentry;
-
-#ifdef CONFIG_XEN
- /*
- * Xen needs to be able to make sure it can get an exclusive
- * RO mapping of pages it wants to turn into a pagetable. If
- * a newly allocated page is also still being vmap()ed by xfs,
- * it will cause pagetable construction to fail. This is a
- * quick workaround to always eagerly unmap pages so that Xen
- * is happy.
- */
- vunmap(addr);
- return;
-#endif
-
- aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
- if (likely(aentry)) {
- spin_lock(&as_lock);
- aentry->next = as_free_head;
- aentry->vm_addr = addr;
- as_free_head = aentry;
- as_list_len++;
- spin_unlock(&as_lock);
- } else {
- vunmap(addr);
- }
-}
-
-STATIC void
-purge_addresses(void)
-{
- a_list_t *aentry, *old;
-
- if (as_free_head == NULL)
- return;
-
- spin_lock(&as_lock);
- aentry = as_free_head;
- as_free_head = NULL;
- as_list_len = 0;
- spin_unlock(&as_lock);
-
- while ((old = aentry) != NULL) {
- vunmap(aentry->vm_addr);
- aentry = aentry->next;
- kfree(old);
- }
-}
-
-/*
* Internal xfs_buf_t object manipulation
*/
uint i;
if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
- free_address(bp->b_addr - bp->b_offset);
+ vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
for (i = 0; i < bp->b_page_count; i++) {
struct page *page = bp->b_pages[i];
bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
bp->b_flags |= XBF_MAPPED;
} else if (flags & XBF_MAPPED) {
- if (as_list_len > 64)
- purge_addresses();
- bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
- VM_MAP, PAGE_KERNEL);
+ bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
+ -1, PAGE_KERNEL);
if (unlikely(bp->b_addr == NULL))
return -ENOMEM;
bp->b_addr += bp->b_offset;
count++;
}
- if (as_list_len > 0)
- purge_addresses();
if (count)
blk_run_address_space(target->bt_mapping);
if (ino == 0)
return ERR_PTR(-ESTALE);
- error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
- if (error)
+ /*
+ * The XFS_IGET_BULKSTAT means that an invalid inode number is just
+ * fine and not an indication of a corrupted filesystem. Because
+ * clients can send any kind of invalid file handle, e.g. after
+ * a restore on the server we have to deal with this case gracefully.
+ */
+ error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
+ XFS_ILOCK_SHARED, &ip, 0);
+ if (error) {
+ /*
+ * EINVAL means the inode cluster doesn't exist anymore.
+ * This implies the filehandle is stale, so we should
+ * translate it here.
+ * We don't use ESTALE directly down the chain to not
+ * confuse applications using bulkstat that expect EINVAL.
+ */
+ if (error == EINVAL)
+ error = ESTALE;
return ERR_PTR(-error);
- if (!ip)
- return ERR_PTR(-EIO);
+ }
if (ip->i_d.di_gen != generation) {
xfs_iput_new(ip, XFS_ILOCK_SHARED);
* Access Control Lists
*/
typedef __uint16_t xfs_acl_perm_t;
-typedef __int32_t xfs_acl_type_t;
typedef __int32_t xfs_acl_tag_t;
typedef __int32_t xfs_acl_id_t;
#define XFS_FSB_TO_AGNO(mp,fsbno) \
((xfs_agnumber_t)((fsbno) >> (mp)->m_sb.sb_agblklog))
#define XFS_FSB_TO_AGBNO(mp,fsbno) \
- ((xfs_agblock_t)((fsbno) & XFS_MASK32LO((mp)->m_sb.sb_agblklog)))
+ ((xfs_agblock_t)((fsbno) & xfs_mask32lo((mp)->m_sb.sb_agblklog)))
#define XFS_AGB_TO_DADDR(mp,agno,agbno) \
((xfs_daddr_t)XFS_FSB_TO_BB(mp, \
(xfs_fsblock_t)(agno) * (mp)->m_sb.sb_agblocks + (agbno)))
continue; /* don't copy partial entries */
if (!(entry->flags & XFS_ATTR_LOCAL))
return(0);
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+ name_loc = xfs_attr_leaf_name_local(leaf, i);
if (name_loc->namelen >= XFS_ATTR_SF_ENTSIZE_MAX)
return(0);
if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX)
if (!entry->nameidx)
continue;
ASSERT(entry->flags & XFS_ATTR_LOCAL);
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+ name_loc = xfs_attr_leaf_name_local(leaf, i);
nargs.name = (char *)name_loc->nameval;
nargs.namelen = name_loc->namelen;
nargs.value = (char *)&name_loc->nameval[nargs.namelen];
* as part of this transaction (a split operation for example).
*/
if (entry->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+ name_loc = xfs_attr_leaf_name_local(leaf, args->index);
name_loc->namelen = args->namelen;
name_loc->valuelen = cpu_to_be16(args->valuelen);
memcpy((char *)name_loc->nameval, args->name, args->namelen);
memcpy((char *)&name_loc->nameval[args->namelen], args->value,
be16_to_cpu(name_loc->valuelen));
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
name_rmt->namelen = args->namelen;
memcpy((char *)name_rmt->name, args->name, args->namelen);
entry->flags |= XFS_ATTR_INCOMPLETE;
args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen);
}
xfs_da_log_buf(args->trans, bp,
- XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+ XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
xfs_attr_leaf_entsize(leaf, args->index)));
/*
/*
* Compress the remaining entries and zero out the removed stuff.
*/
- memset(XFS_ATTR_LEAF_NAME(leaf, args->index), 0, entsize);
+ memset(xfs_attr_leaf_name(leaf, args->index), 0, entsize);
be16_add_cpu(&hdr->usedbytes, -entsize);
xfs_da_log_buf(args->trans, bp,
- XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+ XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
entsize));
tmp = (be16_to_cpu(hdr->count) - args->index)
continue;
}
if (entry->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, probe);
+ name_loc = xfs_attr_leaf_name_local(leaf, probe);
if (name_loc->namelen != args->namelen)
continue;
if (memcmp(args->name, (char *)name_loc->nameval, args->namelen) != 0)
args->index = probe;
return(XFS_ERROR(EEXIST));
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, probe);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, probe);
if (name_rmt->namelen != args->namelen)
continue;
if (memcmp(args->name, (char *)name_rmt->name,
entry = &leaf->entries[args->index];
if (entry->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+ name_loc = xfs_attr_leaf_name_local(leaf, args->index);
ASSERT(name_loc->namelen == args->namelen);
ASSERT(memcmp(args->name, name_loc->nameval, args->namelen) == 0);
valuelen = be16_to_cpu(name_loc->valuelen);
args->valuelen = valuelen;
memcpy(args->value, &name_loc->nameval[args->namelen], valuelen);
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
ASSERT(name_rmt->namelen == args->namelen);
ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0);
valuelen = be32_to_cpu(name_rmt->valuelen);
* off for 6.2, should be revisited later.
*/
if (entry_s->flags & XFS_ATTR_INCOMPLETE) { /* skip partials? */
- memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+ memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
be16_add_cpu(&hdr_s->usedbytes, -tmp);
be16_add_cpu(&hdr_s->count, -1);
entry_d--; /* to compensate for ++ in loop hdr */
entry_d->flags = entry_s->flags;
ASSERT(be16_to_cpu(entry_d->nameidx) + tmp
<= XFS_LBSIZE(mp));
- memmove(XFS_ATTR_LEAF_NAME(leaf_d, desti),
- XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), tmp);
+ memmove(xfs_attr_leaf_name(leaf_d, desti),
+ xfs_attr_leaf_name(leaf_s, start_s + i), tmp);
ASSERT(be16_to_cpu(entry_s->nameidx) + tmp
<= XFS_LBSIZE(mp));
- memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+ memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
be16_add_cpu(&hdr_s->usedbytes, -tmp);
be16_add_cpu(&hdr_d->usedbytes, tmp);
be16_add_cpu(&hdr_s->count, -1);
ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_ATTR_LEAF_MAGIC);
if (leaf->entries[index].flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, index);
- size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(name_loc->namelen,
+ name_loc = xfs_attr_leaf_name_local(leaf, index);
+ size = xfs_attr_leaf_entsize_local(name_loc->namelen,
be16_to_cpu(name_loc->valuelen));
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, index);
- size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(name_rmt->namelen);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, index);
+ size = xfs_attr_leaf_entsize_remote(name_rmt->namelen);
}
return(size);
}
{
int size;
- size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(namelen, valuelen);
- if (size < XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(blocksize)) {
+ size = xfs_attr_leaf_entsize_local(namelen, valuelen);
+ if (size < xfs_attr_leaf_entsize_local_max(blocksize)) {
if (local) {
*local = 1;
}
} else {
- size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(namelen);
+ size = xfs_attr_leaf_entsize_remote(namelen);
if (local) {
*local = 0;
}
if (entry->flags & XFS_ATTR_LOCAL) {
xfs_attr_leaf_name_local_t *name_loc =
- XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+ xfs_attr_leaf_name_local(leaf, i);
retval = context->put_listent(context,
entry->flags,
return retval;
} else {
xfs_attr_leaf_name_remote_t *name_rmt =
- XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+ xfs_attr_leaf_name_remote(leaf, i);
int valuelen = be32_to_cpu(name_rmt->valuelen);
#ifdef DEBUG
if (entry->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+ name_loc = xfs_attr_leaf_name_local(leaf, args->index);
namelen = name_loc->namelen;
name = (char *)name_loc->nameval;
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
namelen = name_rmt->namelen;
name = (char *)name_rmt->name;
}
if (args->rmtblkno) {
ASSERT((entry->flags & XFS_ATTR_LOCAL) == 0);
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
name_rmt->valuelen = cpu_to_be32(args->valuelen);
xfs_da_log_buf(args->trans, bp,
xfs_da_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
if ((entry->flags & XFS_ATTR_LOCAL) == 0) {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
name_rmt->valueblk = 0;
name_rmt->valuelen = 0;
xfs_da_log_buf(args->trans, bp,
#ifdef DEBUG
if (entry1->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf1, args->index);
+ name_loc = xfs_attr_leaf_name_local(leaf1, args->index);
namelen1 = name_loc->namelen;
name1 = (char *)name_loc->nameval;
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
namelen1 = name_rmt->namelen;
name1 = (char *)name_rmt->name;
}
if (entry2->flags & XFS_ATTR_LOCAL) {
- name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf2, args->index2);
+ name_loc = xfs_attr_leaf_name_local(leaf2, args->index2);
namelen2 = name_loc->namelen;
name2 = (char *)name_loc->nameval;
} else {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+ name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
namelen2 = name_rmt->namelen;
name2 = (char *)name_rmt->name;
}
XFS_DA_LOGRANGE(leaf1, entry1, sizeof(*entry1)));
if (args->rmtblkno) {
ASSERT((entry1->flags & XFS_ATTR_LOCAL) == 0);
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+ name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
name_rmt->valuelen = cpu_to_be32(args->valuelen);
xfs_da_log_buf(args->trans, bp1,
xfs_da_log_buf(args->trans, bp2,
XFS_DA_LOGRANGE(leaf2, entry2, sizeof(*entry2)));
if ((entry2->flags & XFS_ATTR_LOCAL) == 0) {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+ name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
name_rmt->valueblk = 0;
name_rmt->valuelen = 0;
xfs_da_log_buf(args->trans, bp2,
for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
if (be16_to_cpu(entry->nameidx) &&
((entry->flags & XFS_ATTR_LOCAL) == 0)) {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, i);
if (name_rmt->valueblk)
count++;
}
for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
if (be16_to_cpu(entry->nameidx) &&
((entry->flags & XFS_ATTR_LOCAL) == 0)) {
- name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+ name_rmt = xfs_attr_leaf_name_remote(leaf, i);
if (name_rmt->valueblk) {
lp->valueblk = be32_to_cpu(name_rmt->valueblk);
lp->valuelen = XFS_B_TO_FSB(dp->i_mount,
/*
* Cast typed pointers for "local" and "remote" name/value structs.
*/
-#define XFS_ATTR_LEAF_NAME_REMOTE(leafp,idx) \
- xfs_attr_leaf_name_remote(leafp,idx)
static inline xfs_attr_leaf_name_remote_t *
xfs_attr_leaf_name_remote(xfs_attr_leafblock_t *leafp, int idx)
{
&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
}
-#define XFS_ATTR_LEAF_NAME_LOCAL(leafp,idx) \
- xfs_attr_leaf_name_local(leafp,idx)
static inline xfs_attr_leaf_name_local_t *
xfs_attr_leaf_name_local(xfs_attr_leafblock_t *leafp, int idx)
{
&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
}
-#define XFS_ATTR_LEAF_NAME(leafp,idx) \
- xfs_attr_leaf_name(leafp,idx)
static inline char *xfs_attr_leaf_name(xfs_attr_leafblock_t *leafp, int idx)
{
return &((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
* a "local" name/value structure, a "remote" name/value structure, and
* a pointer which might be either.
*/
-#define XFS_ATTR_LEAF_ENTSIZE_REMOTE(nlen) \
- xfs_attr_leaf_entsize_remote(nlen)
static inline int xfs_attr_leaf_entsize_remote(int nlen)
{
return ((uint)sizeof(xfs_attr_leaf_name_remote_t) - 1 + (nlen) + \
XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
}
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL(nlen,vlen) \
- xfs_attr_leaf_entsize_local(nlen,vlen)
static inline int xfs_attr_leaf_entsize_local(int nlen, int vlen)
{
return ((uint)sizeof(xfs_attr_leaf_name_local_t) - 1 + (nlen) + (vlen) +
XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
}
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(bsize) \
- xfs_attr_leaf_entsize_local_max(bsize)
static inline int xfs_attr_leaf_entsize_local_max(int bsize)
{
return (((bsize) >> 1) + ((bsize) >> 2));
*/
/*
- * masks with n high/low bits set, 32-bit values & 64-bit values
+ * masks with n high/low bits set, 64-bit values
*/
-#define XFS_MASK32HI(n) xfs_mask32hi(n)
-static inline __uint32_t xfs_mask32hi(int n)
-{
- return (__uint32_t)-1 << (32 - (n));
-}
-#define XFS_MASK64HI(n) xfs_mask64hi(n)
static inline __uint64_t xfs_mask64hi(int n)
{
return (__uint64_t)-1 << (64 - (n));
}
-#define XFS_MASK32LO(n) xfs_mask32lo(n)
static inline __uint32_t xfs_mask32lo(int n)
{
return ((__uint32_t)1 << (n)) - 1;
}
-#define XFS_MASK64LO(n) xfs_mask64lo(n)
static inline __uint64_t xfs_mask64lo(int n)
{
return ((__uint64_t)1 << (n)) - 1;
ext_flag = (int)(l0 >> (64 - BMBT_EXNTFLAG_BITLEN));
s->br_startoff = ((xfs_fileoff_t)l0 &
- XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+ xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
#if XFS_BIG_BLKNOS
- s->br_startblock = (((xfs_fsblock_t)l0 & XFS_MASK64LO(9)) << 43) |
+ s->br_startblock = (((xfs_fsblock_t)l0 & xfs_mask64lo(9)) << 43) |
(((xfs_fsblock_t)l1) >> 21);
#else
#ifdef DEBUG
{
xfs_dfsbno_t b;
- b = (((xfs_dfsbno_t)l0 & XFS_MASK64LO(9)) << 43) |
+ b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
(((xfs_dfsbno_t)l1) >> 21);
ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
s->br_startblock = (xfs_fsblock_t)b;
s->br_startblock = (xfs_fsblock_t)(((xfs_dfsbno_t)l1) >> 21);
#endif /* DEBUG */
#endif /* XFS_BIG_BLKNOS */
- s->br_blockcount = (xfs_filblks_t)(l1 & XFS_MASK64LO(21));
+ s->br_blockcount = (xfs_filblks_t)(l1 & xfs_mask64lo(21));
/* This is xfs_extent_state() in-line */
if (ext_flag) {
ASSERT(s->br_blockcount != 0); /* saved for DMIG */
xfs_bmbt_get_blockcount(
xfs_bmbt_rec_host_t *r)
{
- return (xfs_filblks_t)(r->l1 & XFS_MASK64LO(21));
+ return (xfs_filblks_t)(r->l1 & xfs_mask64lo(21));
}
/*
xfs_bmbt_rec_host_t *r)
{
#if XFS_BIG_BLKNOS
- return (((xfs_fsblock_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+ return (((xfs_fsblock_t)r->l0 & xfs_mask64lo(9)) << 43) |
(((xfs_fsblock_t)r->l1) >> 21);
#else
#ifdef DEBUG
xfs_dfsbno_t b;
- b = (((xfs_dfsbno_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+ b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
(((xfs_dfsbno_t)r->l1) >> 21);
ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
return (xfs_fsblock_t)b;
xfs_bmbt_rec_host_t *r)
{
return ((xfs_fileoff_t)r->l0 &
- XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+ xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
}
xfs_exntst_t
xfs_bmbt_disk_get_blockcount(
xfs_bmbt_rec_t *r)
{
- return (xfs_filblks_t)(be64_to_cpu(r->l1) & XFS_MASK64LO(21));
+ return (xfs_filblks_t)(be64_to_cpu(r->l1) & xfs_mask64lo(21));
}
/*
xfs_bmbt_rec_t *r)
{
return ((xfs_fileoff_t)be64_to_cpu(r->l0) &
- XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+ xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
}
int extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
- ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
- ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+ ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+ ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
#if XFS_BIG_BLKNOS
- ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+ ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9) |
((xfs_bmbt_rec_base_t)startblock >> 43);
r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
#else /* !XFS_BIG_BLKNOS */
if (ISNULLSTARTBLOCK(startblock)) {
r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9) |
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
- r->l1 = XFS_MASK64HI(11) |
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+ r->l1 = xfs_mask64hi(11) |
((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
} else {
r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9);
r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
}
#endif /* XFS_BIG_BLKNOS */
}
int extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
- ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
- ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+ ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+ ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
#if XFS_BIG_BLKNOS
- ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+ ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
r->l0 = cpu_to_be64(
((xfs_bmbt_rec_base_t)extent_flag << 63) |
r->l1 = cpu_to_be64(
((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
#else /* !XFS_BIG_BLKNOS */
if (ISNULLSTARTBLOCK(startblock)) {
r->l0 = cpu_to_be64(
((xfs_bmbt_rec_base_t)extent_flag << 63) |
((xfs_bmbt_rec_base_t)startoff << 9) |
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
- r->l1 = cpu_to_be64(XFS_MASK64HI(11) |
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
+ r->l1 = cpu_to_be64(xfs_mask64hi(11) |
((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
} else {
r->l0 = cpu_to_be64(
((xfs_bmbt_rec_base_t)extent_flag << 63) |
r->l1 = cpu_to_be64(
((xfs_bmbt_rec_base_t)startblock << 21) |
((xfs_bmbt_rec_base_t)blockcount &
- (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+ (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
}
#endif /* XFS_BIG_BLKNOS */
}
xfs_bmbt_rec_host_t *r,
xfs_filblks_t v)
{
- ASSERT((v & XFS_MASK64HI(43)) == 0);
- r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(43)) |
- (xfs_bmbt_rec_base_t)(v & XFS_MASK64LO(21));
+ ASSERT((v & xfs_mask64hi(43)) == 0);
+ r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64hi(43)) |
+ (xfs_bmbt_rec_base_t)(v & xfs_mask64lo(21));
}
/*
xfs_fsblock_t v)
{
#if XFS_BIG_BLKNOS
- ASSERT((v & XFS_MASK64HI(12)) == 0);
- r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(55)) |
+ ASSERT((v & xfs_mask64hi(12)) == 0);
+ r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64hi(55)) |
(xfs_bmbt_rec_base_t)(v >> 43);
- r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)) |
+ r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
(xfs_bmbt_rec_base_t)(v << 21);
#else /* !XFS_BIG_BLKNOS */
if (ISNULLSTARTBLOCK(v)) {
- r->l0 |= (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
- r->l1 = (xfs_bmbt_rec_base_t)XFS_MASK64HI(11) |
+ r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+ r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
((xfs_bmbt_rec_base_t)v << 21) |
- (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+ (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
} else {
- r->l0 &= ~(xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
+ r->l0 &= ~(xfs_bmbt_rec_base_t)xfs_mask64lo(9);
r->l1 = ((xfs_bmbt_rec_base_t)v << 21) |
- (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+ (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
}
#endif /* XFS_BIG_BLKNOS */
}
xfs_bmbt_rec_host_t *r,
xfs_fileoff_t v)
{
- ASSERT((v & XFS_MASK64HI(9)) == 0);
- r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) XFS_MASK64HI(1)) |
+ ASSERT((v & xfs_mask64hi(9)) == 0);
+ r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) xfs_mask64hi(1)) |
((xfs_bmbt_rec_base_t)v << 9) |
- (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
+ (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
}
/*
{
ASSERT(v == XFS_EXT_NORM || v == XFS_EXT_UNWRITTEN);
if (v == XFS_EXT_NORM)
- r->l0 &= XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN);
+ r->l0 &= xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN);
else
- r->l0 |= XFS_MASK64HI(BMBT_EXNTFLAG_BITLEN);
+ r->l0 |= xfs_mask64hi(BMBT_EXNTFLAG_BITLEN);
}
/*
struct xfs_btree_block *block)
{
int rval = 0;
- xfs_fsblock_t left = be64_to_cpu(block->bb_u.l.bb_leftsib);
- xfs_fsblock_t right = be64_to_cpu(block->bb_u.l.bb_rightsib);
+ xfs_dfsbno_t left = be64_to_cpu(block->bb_u.l.bb_leftsib);
+ xfs_dfsbno_t right = be64_to_cpu(block->bb_u.l.bb_rightsib);
if ((lr & XFS_BTCUR_LEFTRA) && left != NULLDFSBNO) {
xfs_btree_reada_bufl(cur->bc_mp, left, 1);
/*
* If it didn't fit, set the final offset to here & return.
*/
- if (filldir(dirent, dep->name, dep->namelen, cook,
+ if (filldir(dirent, dep->name, dep->namelen, cook & 0x7fffffff,
ino, DT_UNKNOWN)) {
- *offset = cook;
+ *offset = cook & 0x7fffffff;
xfs_da_brelse(NULL, bp);
return 0;
}
* Reached the end of the block.
* Set the offset to a non-existent block 1 and return.
*/
- *offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+ *offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+ 0x7fffffff;
xfs_da_brelse(NULL, bp);
return 0;
}
* Won't fit. Return to caller.
*/
if (filldir(dirent, dep->name, dep->namelen,
- xfs_dir2_byte_to_dataptr(mp, curoff),
+ xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff,
ino, DT_UNKNOWN))
break;
* All done. Set output offset value to current offset.
*/
if (curoff > xfs_dir2_dataptr_to_byte(mp, XFS_DIR2_MAX_DATAPTR))
- *offset = XFS_DIR2_MAX_DATAPTR;
+ *offset = XFS_DIR2_MAX_DATAPTR & 0x7fffffff;
else
- *offset = xfs_dir2_byte_to_dataptr(mp, curoff);
+ *offset = xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff;
kmem_free(map);
if (bp)
xfs_da_brelse(NULL, bp);
#if XFS_BIG_INUMS
ino += mp->m_inoadd;
#endif
- if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) {
- *offset = dot_offset;
+ if (filldir(dirent, ".", 1, dot_offset & 0x7fffffff, ino, DT_DIR)) {
+ *offset = dot_offset & 0x7fffffff;
return 0;
}
}
#if XFS_BIG_INUMS
ino += mp->m_inoadd;
#endif
- if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) {
- *offset = dotdot_offset;
+ if (filldir(dirent, "..", 2, dotdot_offset & 0x7fffffff, ino, DT_DIR)) {
+ *offset = dotdot_offset & 0x7fffffff;
return 0;
}
}
#endif
if (filldir(dirent, sfep->name, sfep->namelen,
- off, ino, DT_UNKNOWN)) {
- *offset = off;
+ off & 0x7fffffff, ino, DT_UNKNOWN)) {
+ *offset = off & 0x7fffffff;
return 0;
}
sfep = xfs_dir2_sf_nextentry(sfp, sfep);
}
- *offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+ *offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+ 0x7fffffff;
return 0;
}
typedef __uint32_t inst_t; /* an instruction */
typedef __s64 xfs_off_t; /* <file offset> type */
-typedef __u64 xfs_ino_t; /* <inode> type */
+typedef unsigned long long xfs_ino_t; /* <inode> type */
typedef __s64 xfs_daddr_t; /* <disk address> type */
typedef char * xfs_caddr_t; /* <core address> type */
typedef __u32 xfs_dev_t;
typedef __int64_t xfs_sfiloff_t; /* signed block number in a file */
typedef __uint64_t xfs_filblks_t; /* number of blocks in a file */
-typedef __uint8_t xfs_arch_t; /* architecture of an xfs fs */
-
/*
* Null values for the types.
*/
#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */
#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */
#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */
-#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */
+#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup possible from S4 */
#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */
#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */
header-y += registers.h
unifdef-y += termios.h
-unifdef-y += swab.h
#ifndef _ASM_BYTEORDER_H
#define _ASM_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _ASM_BYTEORDER_H */
unifdef-y += sockios.h
unifdef-y += stat.h
unifdef-y += statfs.h
+unifdef-y += swab.h
unifdef-y += termbits.h
unifdef-y += termios.h
unifdef-y += types.h
* track_pfn_vma_new is called when a _new_ pfn mapping is being established
* for physical range indicated by pfn and size.
*/
-static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size)
{
return 0;
{
}
#else
-extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size);
extern int track_pfn_vma_copy(struct vm_area_struct *vma);
extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
return uip;
}
-static inline unsigned int get_rtc_time(struct rtc_time *time)
+static inline unsigned int __get_rtc_time(struct rtc_time *time)
{
unsigned char ctrl;
unsigned long flags;
return RTC_24H;
}
+#ifndef get_rtc_time
+#define get_rtc_time __get_rtc_time
+#endif
+
/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
+static inline int __set_rtc_time(struct rtc_time *time)
{
unsigned long flags;
unsigned char mon, day, hrs, min, sec;
return 0;
}
+#ifndef set_rtc_time
+#define set_rtc_time __set_rtc_time
+#endif
+
static inline unsigned int get_rtc_ss(void)
{
struct rtc_time h;
- get_rtc_time(&h);
+ __get_rtc_time(&h);
return h.tm_sec;
}
include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
#ifndef _ASM_M32R_BYTEORDER_H
#define _ASM_M32R_BYTEORDER_H
-#include <asm/swab.h>
-
#if defined(__LITTLE_ENDIAN__)
# include <linux/byteorder/little_endian.h>
#else
include include/asm-generic/Kbuild.asm
header-y += cachectl.h
-unifdef-y += swab.h
#ifndef _M68K_BYTEORDER_H
#define _M68K_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/big_endian.h>
#endif /* _M68K_BYTEORDER_H */
include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
#ifndef _ASM_BYTEORDER_H
#define _ASM_BYTEORDER_H
-#include <asm/swab.h>
#include <linux/byteorder/little_endian.h>
#endif /* _ASM_BYTEORDER_H */
void (*save)(struct drm_connector *connector);
void (*restore)(struct drm_connector *connector);
enum drm_connector_status (*detect)(struct drm_connector *connector);
- void (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+ int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
void (*destroy)(struct drm_connector *connector);
struct drm_encoder *(*best_encoder)(struct drm_connector *connector);
};
-extern void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY);
+extern int drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY);
extern void drm_helper_disable_unused_functions(struct drm_device *dev);
extern int drm_helper_hotplug_stage_two(struct drm_device *dev);
extern bool drm_helper_initial_config(struct drm_device *dev, bool can_grow);
#ifndef __KERNEL__
#include <linux/types.h>
-#include <asm/types.h>
struct agp_version {
__u16 major;
#ifndef LINUX_ATM_IDT77105_H
#define LINUX_ATM_IDT77105_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/atmioc.h>
#include <linux/atmdev.h>
#ifndef __LINUX_CAPI_H__
#define __LINUX_CAPI_H__
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/ioctl.h>
#ifndef __KERNEL__
#include <linux/kernelcapi.h>
asmlinkage long compat_sys_timerfd_gettime(int ufd,
struct compat_itimerspec __user *otmr);
+asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
+ __u32 __user *pages,
+ const int __user *nodes,
+ int __user *status,
+ int flags);
+asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
+ struct compat_timeval __user *t);
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
+ struct compat_stat __user *statbuf,
+ int flag);
+asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
+ int flags, int mode);
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
#ifndef __CONNECTOR_H
#define __CONNECTOR_H
-#include <asm/types.h>
+#include <linux/types.h>
#define CN_IDX_CONNECTOR 0xffffffff
#define CN_VAL_CONNECTOR 0xffffffff
* architectures and compilers.
*/
-#include <asm/types.h>
-
typedef __u64 ucdouble; /* 64 bits, unsigned */
typedef __u32 uclong; /* 32 bits, unsigned */
typedef __u16 ucshort; /* 16 bits, unsigned */
#ifndef _LINUX_FB_H
#define _LINUX_FB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/i2c.h>
struct dentry;
ide_hwif_t *cur_port; /* for hosts requiring serialization */
/* used for hosts requiring serialization */
- volatile long host_busy;
+ volatile unsigned long host_busy;
};
#define IDE_HOST_BUSY 0
#ifndef __LINUX_IF_PPPOL2TP_H
#define __LINUX_IF_PPPOL2TP_H
-#include <asm/types.h>
+#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/in.h>
#define __LINUX_IF_PPPOX_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <asm/byteorder.h>
#ifdef __KERNEL__
#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
-#include <asm/types.h>
+#include <linux/types.h>
#endif
/*
extern struct resource * __request_region(struct resource *,
resource_size_t start,
- resource_size_t n, const char *name, int relaxed);
+ resource_size_t n,
+ const char *name, int flags);
/* Compatibility cruft */
#define release_region(start,n) __release_region(&ioport_resource, (start), (n))
* @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
* number that will fit in j_blocksize
* @j_last_sync_writer: most recent pid which did a synchronous write
+ * @j_average_commit_time: the average amount of time in nanoseconds it
+ * takes to commit a transaction to the disk.
* @j_private: An opaque pointer to fs-private information.
*/
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/input.h>
/*
* Note: you must update KVM_API_VERSION if you change this interface.
*/
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <asm/kvm.h>
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
- ATA_TIMING_CYCLE = (1 << 6),
- ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_DMACK_HOLD = (1 << 6),
+ ATA_TIMING_CYCLE = (1 << 7),
+ ATA_TIMING_UDMA = (1 << 8),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
- ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+ ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+ ATA_TIMING_UDMA,
};
enum ata_xfer_mask {
unsigned short cyc8b; /* t0 for 8-bit I/O */
unsigned short active; /* t2 or tD */
unsigned short recover; /* t2i or tK */
+ unsigned short dmack_hold; /* tj */
unsigned short cycle; /* t0 */
unsigned short udma; /* t2CYCTYP/2 */
};
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
+ int cmd, void __user *arg);
extern void ata_sas_port_destroy(struct ata_port *);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
struct ata_port_info *, struct Scsi_Host *);
};
#include <asm/posix_types.h> /* for __kernel_old_dev_t */
-#include <asm/types.h> /* for __u64 */
+#include <linux/types.h> /* for __u64 */
/* Backwards compatibility version */
struct loop_info {
#define SYSFS_MAGIC 0x62656572
#define SECURITYFS_MAGIC 0x73636673
#define TMPFS_MAGIC 0x01021994
+#define SQUASHFS_MAGIC 0x73717368
#define EFS_SUPER_MAGIC 0x414A53
#define EXT2_SUPER_MAGIC 0xEF53
#define EXT3_SUPER_MAGIC 0xEF53
#define XENFS_SUPER_MAGIC 0xabba1974
#define EXT4_SUPER_MAGIC 0xEF53
+#define BTRFS_SUPER_MAGIC 0x9123683E
#define HPFS_SUPER_MAGIC 0xf995e849
#define ISOFS_SUPER_MAGIC 0x9660
#define JFFS2_SUPER_MAGIC 0x72b6
#define __LINUX_MATROXFB_H__
#include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/videodev2.h>
struct matroxioc_output_mode {
*/
static inline int get_page_unless_zero(struct page *page)
{
- VM_BUG_ON(PageTail(page));
return atomic_inc_not_zero(&page->_count);
}
* This function is called when network device transistions to the down
* state.
*
- * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev);
+ * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
* Called when a packet needs to be transmitted.
* Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED,
* Required can not be NULL.
NETREG_UNREGISTERING, /* called unregister_netdevice */
NETREG_UNREGISTERED, /* completed unregister todo */
NETREG_RELEASED, /* called free_netdev */
+ NETREG_DUMMY, /* dummy device for NAPI poll */
} reg_state;
/* Called from unregister, can be used to call free_netdev */
extern void synchronize_net(void);
extern int register_netdevice_notifier(struct notifier_block *nb);
extern int unregister_netdevice_notifier(struct notifier_block *nb);
+extern int init_dummy_netdev(struct net_device *dev);
+
extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
extern struct net_device *dev_get_by_index(struct net *net, int ifindex);
extern struct net_device *__dev_get_by_index(struct net *net, int ifindex);
struct list_head list;
const char name[XT_FUNCTION_MAXNAMELEN-1];
+ u_int8_t revision;
/* Return true or false: return FALSE and set *hotdrop = 1 to
force immediate packet drop. */
unsigned short proto;
unsigned short family;
- u_int8_t revision;
};
/* Registration hooks for targets. */
void of_register_i2c_devices(struct i2c_adapter *adap,
struct device_node *adap_node);
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
#endif /* __LINUX_OF_I2C_H */
#define PCI_DEVICE_ID_RDC_R6040 0x6040
#define PCI_DEVICE_ID_RDC_R6060 0x6060
#define PCI_DEVICE_ID_RDC_R6061 0x6061
+#define PCI_DEVICE_ID_RDC_D1010 0x1010
#define PCI_VENDOR_ID_LENOVO 0x17aa
#ifndef __PHANTOM_H
#define __PHANTOM_H
-#include <asm/types.h>
+#include <linux/types.h>
/* PHN_(G/S)ET_REG param */
struct phm_reg {
#define __LINUX_RADEONFB_H__
#include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
#define ATY_RADEON_LCD_ON 0x00000001
#define ATY_RADEON_CRT_ON 0x00000002
*
* Author: Pavel Emelianov <xemul@openvz.org>
*
- * See Documentation/controllers/resource_counter.txt for more
+ * See Documentation/cgroups/resource_counter.txt for more
* info about what this counter is.
*/
#include <linux/types.h>
#include <linux/compiler.h>
-#include <asm/byteorder.h>
+#include <asm/swab.h>
/*
* casts are necessary for constants, because we never know how for sure
struct compat_timeval;
struct robust_list_head;
struct getcpu_cache;
+struct old_linux_dirent;
#include <linux/types.h>
#include <linux/aio_abi.h>
#include <linux/quota.h>
#include <linux/key.h>
+#define __SC_DECL1(t1, a1) t1 a1
+#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
+#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
+#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__)
+#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__)
+#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__)
+
+#define __SC_LONG1(t1, a1) long a1
+#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__)
+#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__)
+#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__)
+#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__)
+#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__)
+
+#define __SC_CAST1(t1, a1) (t1) a1
+#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__)
+#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__)
+#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__)
+#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__)
+#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__)
+
+#define __SC_TEST(type) BUILD_BUG_ON(sizeof(type) > sizeof(long))
+#define __SC_TEST1(t1, a1) __SC_TEST(t1)
+#define __SC_TEST2(t2, a2, ...) __SC_TEST(t2); __SC_TEST1(__VA_ARGS__)
+#define __SC_TEST3(t3, a3, ...) __SC_TEST(t3); __SC_TEST2(__VA_ARGS__)
+#define __SC_TEST4(t4, a4, ...) __SC_TEST(t4); __SC_TEST3(__VA_ARGS__)
+#define __SC_TEST5(t5, a5, ...) __SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
+#define __SC_TEST6(t6, a6, ...) __SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+
+#define SYSCALL_DEFINE0(name) asmlinkage long sys_##name(void)
+#define SYSCALL_DEFINE1(...) SYSCALL_DEFINEx(1, __VA_ARGS__)
+#define SYSCALL_DEFINE2(...) SYSCALL_DEFINEx(2, __VA_ARGS__)
+#define SYSCALL_DEFINE3(...) SYSCALL_DEFINEx(3, __VA_ARGS__)
+#define SYSCALL_DEFINE4(...) SYSCALL_DEFINEx(4, __VA_ARGS__)
+#define SYSCALL_DEFINE5(...) SYSCALL_DEFINEx(5, __VA_ARGS__)
+#define SYSCALL_DEFINE6(...) SYSCALL_DEFINEx(6, __VA_ARGS__)
+
+#ifdef CONFIG_PPC64
+#define SYSCALL_ALIAS(alias, name) \
+ asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
+ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
+#else
+#define SYSCALL_ALIAS(alias, name) \
+ asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+#endif
+
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+
+#define SYSCALL_DEFINE(name) static inline long SYSC_##name
+#define SYSCALL_DEFINEx(x, name, ...) \
+ asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__)); \
+ static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__)); \
+ asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__)) \
+ { \
+ __SC_TEST##x(__VA_ARGS__); \
+ return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__)); \
+ } \
+ SYSCALL_ALIAS(sys_##name, SyS_##name); \
+ static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__))
+
+#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
+#define SYSCALL_DEFINE(name) asmlinkage long sys_##name
+#define SYSCALL_DEFINEx(x, name, ...) \
+ asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__))
+
+#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
asmlinkage long sys_time(time_t __user *tloc);
asmlinkage long sys_stime(time_t __user *tptr);
asmlinkage long sys_gettimeofday(struct timeval __user *tv,
asmlinkage long sys_gettid(void);
asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
-asmlinkage unsigned long sys_alarm(unsigned int seconds);
+asmlinkage long sys_alarm(unsigned int seconds);
asmlinkage long sys_getpid(void);
asmlinkage long sys_getppid(void);
asmlinkage long sys_getuid(void);
unsigned long flags);
asmlinkage long sys_exit(int error_code);
-asmlinkage void sys_exit_group(int error_code);
+asmlinkage long sys_exit_group(int error_code);
asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
int options, struct rusage __user *ru);
asmlinkage long sys_waitid(int which, pid_t pid,
asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
asmlinkage long sys_sgetmask(void);
asmlinkage long sys_ssetmask(int newmask);
-asmlinkage unsigned long sys_signal(int sig, __sighandler_t handler);
+asmlinkage long sys_signal(int sig, __sighandler_t handler);
asmlinkage long sys_pause(void);
asmlinkage long sys_sync(void);
const void __user *value, size_t size, int flags);
asmlinkage long sys_fsetxattr(int fd, const char __user *name,
const void __user *value, size_t size, int flags);
-asmlinkage ssize_t sys_getxattr(const char __user *path, const char __user *name,
- void __user *value, size_t size);
-asmlinkage ssize_t sys_lgetxattr(const char __user *path, const char __user *name,
- void __user *value, size_t size);
-asmlinkage ssize_t sys_fgetxattr(int fd, const char __user *name,
- void __user *value, size_t size);
-asmlinkage ssize_t sys_listxattr(const char __user *path, char __user *list,
- size_t size);
-asmlinkage ssize_t sys_llistxattr(const char __user *path, char __user *list,
- size_t size);
-asmlinkage ssize_t sys_flistxattr(int fd, char __user *list, size_t size);
+asmlinkage long sys_getxattr(const char __user *path, const char __user *name,
+ void __user *value, size_t size);
+asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name,
+ void __user *value, size_t size);
+asmlinkage long sys_fgetxattr(int fd, const char __user *name,
+ void __user *value, size_t size);
+asmlinkage long sys_listxattr(const char __user *path, char __user *list,
+ size_t size);
+asmlinkage long sys_llistxattr(const char __user *path, char __user *list,
+ size_t size);
+asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size);
asmlinkage long sys_removexattr(const char __user *path,
const char __user *name);
asmlinkage long sys_lremovexattr(const char __user *path,
const char __user *name);
asmlinkage long sys_fremovexattr(int fd, const char __user *name);
-asmlinkage unsigned long sys_brk(unsigned long brk);
+asmlinkage long sys_brk(unsigned long brk);
asmlinkage long sys_mprotect(unsigned long start, size_t len,
unsigned long prot);
-asmlinkage unsigned long sys_mremap(unsigned long addr,
- unsigned long old_len, unsigned long new_len,
- unsigned long flags, unsigned long new_addr);
+asmlinkage long sys_mremap(unsigned long addr,
+ unsigned long old_len, unsigned long new_len,
+ unsigned long flags, unsigned long new_addr);
asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
unsigned long prot, unsigned long pgoff,
unsigned long flags);
struct iocb __user * __user *);
asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
struct io_event __user *result);
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd,
- off_t __user *offset, size_t count);
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd,
- loff_t __user *offset, size_t count);
+asmlinkage long sys_sendfile(int out_fd, int in_fd,
+ off_t __user *offset, size_t count);
+asmlinkage long sys_sendfile64(int out_fd, int in_fd,
+ loff_t __user *offset, size_t count);
asmlinkage long sys_readlink(const char __user *path,
char __user *buf, int bufsiz);
asmlinkage long sys_creat(const char __user *pathname, int mode);
struct utimbuf __user *times);
asmlinkage long sys_utimes(char __user *filename,
struct timeval __user *utimes);
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset,
- unsigned int origin);
+asmlinkage long sys_lseek(unsigned int fd, off_t offset,
+ unsigned int origin);
asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
unsigned long offset_low, loff_t __user *result,
unsigned int origin);
-asmlinkage ssize_t sys_read(unsigned int fd, char __user *buf,
- size_t count);
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count);
-asmlinkage ssize_t sys_readv(unsigned long fd,
- const struct iovec __user *vec,
- unsigned long vlen);
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user *buf,
- size_t count);
-asmlinkage ssize_t sys_writev(unsigned long fd,
- const struct iovec __user *vec,
- unsigned long vlen);
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
- size_t count, loff_t pos);
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
- size_t count, loff_t pos);
+asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count);
+asmlinkage long sys_readahead(int fd, loff_t offset, size_t count);
+asmlinkage long sys_readv(unsigned long fd,
+ const struct iovec __user *vec,
+ unsigned long vlen);
+asmlinkage long sys_write(unsigned int fd, const char __user *buf,
+ size_t count);
+asmlinkage long sys_writev(unsigned long fd,
+ const struct iovec __user *vec,
+ unsigned long vlen);
+asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
+ size_t count, loff_t pos);
+asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
+ size_t count, loff_t pos);
asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
asmlinkage long sys_mkdir(const char __user *pathname, int mode);
asmlinkage long sys_chdir(const char __user *filename);
asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
asmlinkage long sys_mq_unlink(const char __user *name);
asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
const int __user *nodes,
int __user *status,
int flags);
-asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
- __u32 __user *pages,
- const int __user *nodes,
- int __user *status,
- int flags);
asmlinkage long sys_mbind(unsigned long start, unsigned long len,
unsigned long mode,
unsigned long __user *nmask,
int bufsiz);
asmlinkage long sys_utimensat(int dfd, char __user *filename,
struct timespec __user *utimes, int flags);
-asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
- struct compat_timeval __user *t);
-asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
- struct compat_stat __user *statbuf,
- int flag);
-asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
- int flags, int mode);
asmlinkage long sys_unshare(unsigned long unshare_flags);
asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
asmlinkage long sys_eventfd(unsigned int count);
asmlinkage long sys_eventfd2(unsigned int count, int flags);
asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
+asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
+asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
+ fd_set __user *, struct timespec __user *,
+ void __user *);
+asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
+ struct timespec __user *, const sigset_t __user *,
+ size_t);
+asmlinkage long sys_pipe2(int __user *, int);
+asmlinkage long sys_pipe(int __user *);
int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
unsigned int total_copied;
struct hash_desc *hash;
+ unsigned char padbuf[ISCSI_PAD_LEN];
unsigned char recv_digest[ISCSI_DIGEST_SIZE];
unsigned char digest[ISCSI_DIGEST_SIZE];
unsigned int digest_len;
This option allows you to create arbitrary task groups
using the "cgroup" pseudo filesystem and control
the cpu bandwidth allocated to each such task group.
- Refer to Documentation/cgroups.txt for more information
- on "cgroup" pseudo filesystem.
+ Refer to Documentation/cgroups/cgroups.txt for more
+ information on "cgroup" pseudo filesystem.
endchoice
-menu "Control Group support"
-config CGROUPS
- bool "Control Group support"
+menuconfig CGROUPS
+ boolean "Control Group support"
help
- This option add support for grouping sets of processes together, for
+ This option adds support for grouping sets of processes together, for
use with process control subsystems such as Cpusets, CFS, memory
controls or device isolation.
See
- - Documentation/cpusets.txt (Cpusets)
- Documentation/scheduler/sched-design-CFS.txt (CFS)
- - Documentation/cgroups/ (features for grouping, isolation)
- - Documentation/controllers/ (features for resource control)
+ - Documentation/cgroups/ (features for grouping, isolation
+ and resource control)
Say N if unsure.
+if CGROUPS
+
config CGROUP_DEBUG
bool "Example debug cgroup subsystem"
depends on CGROUPS
help
This option enables a simple cgroup subsystem that
exports useful debugging information about the cgroups
- framework
+ framework.
- Say N if unsure
+ Say N if unsure.
config CGROUP_NS
- bool "Namespace cgroup subsystem"
- depends on CGROUPS
- help
- Provides a simple namespace cgroup subsystem to
- provide hierarchical naming of sets of namespaces,
- for instance virtual servers and checkpoint/restart
- jobs.
+ bool "Namespace cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a simple namespace cgroup subsystem to
+ provide hierarchical naming of sets of namespaces,
+ for instance virtual servers and checkpoint/restart
+ jobs.
config CGROUP_FREEZER
- bool "control group freezer subsystem"
- depends on CGROUPS
- help
- Provides a way to freeze and unfreeze all tasks in a
+ bool "Freezer cgroup subsystem"
+ depends on CGROUPS
+ help
+ Provides a way to freeze and unfreeze all tasks in a
cgroup.
config CGROUP_DEVICE
Say N if unsure.
+config PROC_PID_CPUSET
+ bool "Include legacy /proc/<pid>/cpuset file"
+ depends on CPUSETS
+ default y
+
config CGROUP_CPUACCT
bool "Simple CPU accounting cgroup subsystem"
depends on CGROUPS
help
Provides a simple Resource Controller for monitoring the
- total CPU consumed by the tasks in a cgroup
+ total CPU consumed by the tasks in a cgroup.
config RESOURCE_COUNTERS
bool "Resource counters"
help
This option enables controller independent resource accounting
- infrastructure that works with cgroups
+ infrastructure that works with cgroups.
depends on CGROUPS
config CGROUP_MEM_RES_CTLR
This config option also selects MM_OWNER config option, which
could in turn add some fork/exit overhead.
-config MM_OWNER
- bool
-
config CGROUP_MEM_RES_CTLR_SWAP
bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
there will be no overhead from this. Even when you set this config=y,
if boot option "noswapaccount" is set, swap will not be accounted.
+endif # CGROUPS
-endmenu
+config MM_OWNER
+ bool
config SYSFS_DEPRECATED
bool
if the original kernel, that came with your distribution, has
this option set to N.
-config PROC_PID_CPUSET
- bool "Include legacy /proc/<pid>/cpuset file"
- depends on CPUSETS
- default y
-
config RELAY
bool "Kernel->user space relay support (formerly relayfs)"
help
return dentry_open(dentry, mqueue_mnt, oflag, cred);
}
-asmlinkage long sys_mq_open(const char __user *u_name, int oflag, mode_t mode,
- struct mq_attr __user *u_attr)
+SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, mode_t, mode,
+ struct mq_attr __user *, u_attr)
{
struct dentry *dentry;
struct file *filp;
return fd;
}
-asmlinkage long sys_mq_unlink(const char __user *u_name)
+SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name)
{
int err;
char *name;
sender->state = STATE_READY;
}
-asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *u_msg_ptr,
- size_t msg_len, unsigned int msg_prio,
- const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedsend, mqd_t, mqdes, const char __user *, u_msg_ptr,
+ size_t, msg_len, unsigned int, msg_prio,
+ const struct timespec __user *, u_abs_timeout)
{
struct file *filp;
struct inode *inode;
return ret;
}
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *u_msg_ptr,
- size_t msg_len, unsigned int __user *u_msg_prio,
- const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedreceive, mqd_t, mqdes, char __user *, u_msg_ptr,
+ size_t, msg_len, unsigned int __user *, u_msg_prio,
+ const struct timespec __user *, u_abs_timeout)
{
long timeout;
ssize_t ret;
* and he isn't currently owner of notification, will be silently discarded.
* It isn't explicitly defined in the POSIX.
*/
-asmlinkage long sys_mq_notify(mqd_t mqdes,
- const struct sigevent __user *u_notification)
+SYSCALL_DEFINE2(mq_notify, mqd_t, mqdes,
+ const struct sigevent __user *, u_notification)
{
int ret;
struct file *filp;
return ret;
}
-asmlinkage long sys_mq_getsetattr(mqd_t mqdes,
- const struct mq_attr __user *u_mqstat,
- struct mq_attr __user *u_omqstat)
+SYSCALL_DEFINE3(mq_getsetattr, mqd_t, mqdes,
+ const struct mq_attr __user *, u_mqstat,
+ struct mq_attr __user *, u_omqstat)
{
int ret;
struct mq_attr mqstat, omqstat;
return security_msg_queue_associate(msq, msgflg);
}
-asmlinkage long sys_msgget(key_t key, int msgflg)
+SYSCALL_DEFINE2(msgget, key_t, key, int, msgflg)
{
struct ipc_namespace *ns;
struct ipc_ops msg_ops;
return err;
}
-asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf)
+SYSCALL_DEFINE3(msgctl, int, msqid, int, cmd, struct msqid_ds __user *, buf)
{
struct msg_queue *msq;
int err, version;
return err;
}
-asmlinkage long
-sys_msgsnd(int msqid, struct msgbuf __user *msgp, size_t msgsz, int msgflg)
+SYSCALL_DEFINE4(msgsnd, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+ int, msgflg)
{
long mtype;
return msgsz;
}
-asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp, size_t msgsz,
- long msgtyp, int msgflg)
+SYSCALL_DEFINE5(msgrcv, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+ long, msgtyp, int, msgflg)
{
long err, mtype;
return 0;
}
-asmlinkage long sys_semget(key_t key, int nsems, int semflg)
+SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
{
struct ipc_namespace *ns;
struct ipc_ops sem_ops;
return err;
}
-asmlinkage long sys_semctl (int semid, int semnum, int cmd, union semun arg)
+SYSCALL_DEFINE(semctl)(int semid, int semnum, int cmd, union semun arg)
{
int err = -EINVAL;
int version;
return -EINVAL;
}
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_semctl(int semid, int semnum, int cmd, union semun arg)
+{
+ return SYSC_semctl((int) semid, (int) semnum, (int) cmd, arg);
+}
+SYSCALL_ALIAS(sys_semctl, SyS_semctl);
+#endif
/* If the task doesn't already have a undo_list, then allocate one
* here. We guarantee there is only one thread using this undo list,
return un;
}
-asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
- unsigned nsops, const struct timespec __user *timeout)
+SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
+ unsigned, nsops, const struct timespec __user *, timeout)
{
int error = -EINVAL;
struct sem_array *sma;
return error;
}
-asmlinkage long sys_semop (int semid, struct sembuf __user *tsops, unsigned nsops)
+SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
+ unsigned, nsops)
{
return sys_semtimedop(semid, tsops, nsops, NULL);
}
return 0;
}
-asmlinkage long sys_shmget (key_t key, size_t size, int shmflg)
+SYSCALL_DEFINE3(shmget, key_t, key, size_t, size, int, shmflg)
{
struct ipc_namespace *ns;
struct ipc_ops shm_ops;
return err;
}
-asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf)
+SYSCALL_DEFINE3(shmctl, int, shmid, int, cmd, struct shmid_ds __user *, buf)
{
struct shmid_kernel *shp;
int err, version;
goto out_nattch;
}
-asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg)
+SYSCALL_DEFINE3(shmat, int, shmid, char __user *, shmaddr, int, shmflg)
{
unsigned long ret;
long err;
* detach and kill segment if marked destroyed.
* The work is done in shm_close.
*/
-asmlinkage long sys_shmdt(char __user *shmaddr)
+SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma, *next;
obj-$(CONFIG_DEBUG_RT_MUTEXES) += rtmutex-debug.o
obj-$(CONFIG_RT_MUTEX_TESTER) += rtmutex-tester.o
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
-ifeq ($(CONFIG_USE_GENERIC_SMP_HELPERS),y)
-obj-y += smp.o
-else
+obj-$(CONFIG_USE_GENERIC_SMP_HELPERS) += smp.o
+ifneq ($(CONFIG_SMP),y)
obj-y += up.o
endif
obj-$(CONFIG_SMP) += spinlock.o
* should be written. If the filename is NULL, accounting will be
* shutdown.
*/
-asmlinkage long sys_acct(const char __user *name)
+SYSCALL_DEFINE1(acct, const char __user *, name)
{
int error;
*
* Returns 0 on success and < 0 on error.
*/
-asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
+SYSCALL_DEFINE2(capget, cap_user_header_t, header, cap_user_data_t, dataptr)
{
int ret = 0;
pid_t pid;
*
* Returns 0 on success and < 0 on error.
*/
-asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
+SYSCALL_DEFINE2(capset, cap_user_header_t, header, const cap_user_data_t, data)
{
struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i, tocopy;
* load balancing domains (sched domains) as specified by that partial
* partition.
*
- * See "What is sched_load_balance" in Documentation/cpusets.txt
+ * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt
* for a background explanation of this.
*
* Does not return errors, on the theory that the callers of this
module_init(proc_execdomains_init);
#endif
-asmlinkage long
-sys_personality(u_long personality)
+SYSCALL_DEFINE1(personality, u_long, personality)
{
u_long old = current->personality;
EXPORT_SYMBOL(complete_and_exit);
-asmlinkage long sys_exit(int error_code)
+SYSCALL_DEFINE1(exit, int, error_code)
{
do_exit((error_code&0xff)<<8);
}
* wait4()-ing process will get the correct exit code - even if this
* thread is not the thread group leader.
*/
-asmlinkage void sys_exit_group(int error_code)
+SYSCALL_DEFINE1(exit_group, int, error_code)
{
do_group_exit((error_code & 0xff) << 8);
+ /* NOTREACHED */
+ return 0;
}
static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
return retval;
}
-asmlinkage long sys_waitid(int which, pid_t upid,
- struct siginfo __user *infop, int options,
- struct rusage __user *ru)
+SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
+ infop, int, options, struct rusage __user *, ru)
{
struct pid *pid = NULL;
enum pid_type type;
return ret;
}
-asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr,
- int options, struct rusage __user *ru)
+SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
+ int, options, struct rusage __user *, ru)
{
struct pid *pid = NULL;
enum pid_type type;
* sys_waitpid() remains for compatibility. waitpid() should be
* implemented by calling sys_wait4() from libc.a.
*/
-asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options)
+SYSCALL_DEFINE3(waitpid, pid_t, pid, int __user *, stat_addr, int, options)
{
return sys_wait4(pid, stat_addr, options, NULL);
}
clear_freeze_flag(p);
}
-asmlinkage long sys_set_tid_address(int __user *tidptr)
+SYSCALL_DEFINE1(set_tid_address, int __user *, tidptr)
{
current->clear_child_tid = tidptr;
* constructed. Here we are modifying the current, active,
* task_struct.
*/
-asmlinkage long sys_unshare(unsigned long unshare_flags)
+SYSCALL_DEFINE1(unshare, unsigned long, unshare_flags)
{
int err = 0;
struct fs_struct *fs, *new_fs = NULL;
* @head: pointer to the list-head
* @len: length of the list-head, as userspace expects
*/
-asmlinkage long
-sys_set_robust_list(struct robust_list_head __user *head,
- size_t len)
+SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
+ size_t, len)
{
if (!futex_cmpxchg_enabled)
return -ENOSYS;
* @head_ptr: pointer to a list-head pointer, the kernel fills it in
* @len_ptr: pointer to a length field, the kernel fills in the header size
*/
-asmlinkage long
-sys_get_robust_list(int pid, struct robust_list_head __user * __user *head_ptr,
- size_t __user *len_ptr)
+SYSCALL_DEFINE3(get_robust_list, int, pid,
+ struct robust_list_head __user * __user *, head_ptr,
+ size_t __user *, len_ptr)
{
struct robust_list_head __user *head;
unsigned long ret;
}
-asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
- struct timespec __user *utime, u32 __user *uaddr2,
- u32 val3)
+SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
+ struct timespec __user *, utime, u32 __user *, uaddr2,
+ u32, val3)
{
struct timespec ts;
ktime_t t, *tp = NULL;
return ret;
}
-asmlinkage long
-sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp)
+SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
+ struct timespec __user *, rmtp)
{
struct timespec tu;
return 0;
}
-asmlinkage long sys_getitimer(int which, struct itimerval __user *value)
+SYSCALL_DEFINE2(getitimer, int, which, struct itimerval __user *, value)
{
int error = -EFAULT;
struct itimerval get_buffer;
return it_old.it_value.tv_sec;
}
-asmlinkage long sys_setitimer(int which,
- struct itimerval __user *value,
- struct itimerval __user *ovalue)
+SYSCALL_DEFINE3(setitimer, int, which, struct itimerval __user *, value,
+ struct itimerval __user *, ovalue)
{
struct itimerval set_buffer, get_buffer;
int error;
static DEFINE_MUTEX(kexec_mutex);
-asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
- struct kexec_segment __user *segments,
- unsigned long flags)
+SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments,
+ struct kexec_segment __user *, segments, unsigned long, flags)
{
struct kimage **dest_image, *image;
int result;
static int __kprobes check_safety(void)
{
int ret = 0;
-#if defined(CONFIG_PREEMPT) && defined(CONFIG_PM)
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_FREEZER)
ret = freeze_processes();
if (ret == 0) {
struct task_struct *p, *q;
mutex_lock(&module_mutex);
}
-asmlinkage long
-sys_delete_module(const char __user *name_user, unsigned int flags)
+SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
+ unsigned int, flags)
{
struct module *mod;
char name[MODULE_NAME_LEN];
}
/* This is where the real work happens */
-asmlinkage long
-sys_init_module(void __user *umod,
- unsigned long len,
- const char __user *uargs)
+SYSCALL_DEFINE3(init_module, void __user *, umod,
+ unsigned long, len, const char __user *, uargs)
{
struct module *mod;
int ret = 0;
/* Create a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_create(const clockid_t which_clock,
- struct sigevent __user *timer_event_spec,
- timer_t __user * created_timer_id)
+SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
+ struct sigevent __user *, timer_event_spec,
+ timer_t __user *, created_timer_id)
{
struct k_itimer *new_timer;
int error, new_timer_id;
}
/* Get the time remaining on a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_gettime(timer_t timer_id, struct itimerspec __user *setting)
+SYSCALL_DEFINE2(timer_gettime, timer_t, timer_id,
+ struct itimerspec __user *, setting)
{
struct k_itimer *timr;
struct itimerspec cur_setting;
* the call back to do_schedule_next_timer(). So all we need to do is
* to pick up the frozen overrun.
*/
-asmlinkage long
-sys_timer_getoverrun(timer_t timer_id)
+SYSCALL_DEFINE1(timer_getoverrun, timer_t, timer_id)
{
struct k_itimer *timr;
int overrun;
}
/* Set a POSIX.1b interval timer */
-asmlinkage long
-sys_timer_settime(timer_t timer_id, int flags,
- const struct itimerspec __user *new_setting,
- struct itimerspec __user *old_setting)
+SYSCALL_DEFINE4(timer_settime, timer_t, timer_id, int, flags,
+ const struct itimerspec __user *, new_setting,
+ struct itimerspec __user *, old_setting)
{
struct k_itimer *timr;
struct itimerspec new_spec, old_spec;
}
/* Delete a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_delete(timer_t timer_id)
+SYSCALL_DEFINE1(timer_delete, timer_t, timer_id)
{
struct k_itimer *timer;
unsigned long flags;
}
EXPORT_SYMBOL_GPL(do_posix_clock_nonanosleep);
-asmlinkage long sys_clock_settime(const clockid_t which_clock,
- const struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_settime, const clockid_t, which_clock,
+ const struct timespec __user *, tp)
{
struct timespec new_tp;
return CLOCK_DISPATCH(which_clock, clock_set, (which_clock, &new_tp));
}
-asmlinkage long
-sys_clock_gettime(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_gettime, const clockid_t, which_clock,
+ struct timespec __user *,tp)
{
struct timespec kernel_tp;
int error;
}
-asmlinkage long
-sys_clock_getres(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_getres, const clockid_t, which_clock,
+ struct timespec __user *, tp)
{
struct timespec rtn_tp;
int error;
which_clock);
}
-asmlinkage long
-sys_clock_nanosleep(const clockid_t which_clock, int flags,
- const struct timespec __user *rqtp,
- struct timespec __user *rmtp)
+SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags,
+ const struct timespec __user *, rqtp,
+ struct timespec __user *, rmtp)
{
struct timespec t;
endif
obj-y := main.o
-obj-$(CONFIG_PM_SLEEP) += process.o console.o
+obj-$(CONFIG_PM_SLEEP) += console.o
+obj-$(CONFIG_FREEZER) += process.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
return error;
}
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
+SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
{
return do_syslog(type, buf, len);
}
#else
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
-{
- return -ENOSYS;
-}
-
static void call_console_drivers(unsigned start, unsigned end)
{
}
#define arch_ptrace_attach(child) do { } while (0)
#endif
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+SYSCALL_DEFINE4(ptrace, long, request, long, pid, long, addr, long, data)
{
struct task_struct *child;
long ret;
* @start: resource start address
* @n: resource region size
* @name: reserving caller's ID string
+ * @flags: IO resource flags
*/
struct resource * __request_region(struct resource *parent,
resource_size_t start, resource_size_t n,
* slice expiry etc.
*/
-#define WEIGHT_IDLEPRIO 2
-#define WMULT_IDLEPRIO (1 << 31)
+#define WEIGHT_IDLEPRIO 3
+#define WMULT_IDLEPRIO 1431655765
/*
* Nice levels are multiplicative, with a gentle 10% change for every
/*
* Underflow?
*/
- if (DEBUG_LOCKS_WARN_ON(val > preempt_count() - (!!kernel_locked())))
+ if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
return;
/*
* Is the spinlock portion underflowing?
* sys_setpriority is a more generic, but much slower function that
* does similar things.
*/
-asmlinkage long sys_nice(int increment)
+SYSCALL_DEFINE1(nice, int, increment)
{
long nice, retval;
* @policy: new policy.
* @param: structure containing the new RT priority.
*/
-asmlinkage long
-sys_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
+SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy,
+ struct sched_param __user *, param)
{
/* negative values for policy are not valid */
if (policy < 0)
* @pid: the pid in question.
* @param: structure containing the new RT priority.
*/
-asmlinkage long sys_sched_setparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
{
return do_sched_setscheduler(pid, -1, param);
}
* sys_sched_getscheduler - get the policy (scheduling class) of a thread
* @pid: the pid in question.
*/
-asmlinkage long sys_sched_getscheduler(pid_t pid)
+SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
{
struct task_struct *p;
int retval;
* @pid: the pid in question.
* @param: structure containing the RT priority.
*/
-asmlinkage long sys_sched_getparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
{
struct sched_param lp;
struct task_struct *p;
* @len: length in bytes of the bitmask pointed to by user_mask_ptr
* @user_mask_ptr: user-space pointer to the new cpu mask
*/
-asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
- unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
+ unsigned long __user *, user_mask_ptr)
{
cpumask_var_t new_mask;
int retval;
* @len: length in bytes of the bitmask pointed to by user_mask_ptr
* @user_mask_ptr: user-space pointer to hold the current cpu mask
*/
-asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
- unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
+ unsigned long __user *, user_mask_ptr)
{
int ret;
cpumask_var_t mask;
* This function yields the current CPU to other tasks. If there are no
* other threads running on this CPU then this function will return.
*/
-asmlinkage long sys_sched_yield(void)
+SYSCALL_DEFINE0(sched_yield)
{
struct rq *rq = this_rq_lock();
* this syscall returns the maximum rt_priority that can be used
* by a given scheduling class.
*/
-asmlinkage long sys_sched_get_priority_max(int policy)
+SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
{
int ret = -EINVAL;
* this syscall returns the minimum rt_priority that can be used
* by a given scheduling class.
*/
-asmlinkage long sys_sched_get_priority_min(int policy)
+SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
{
int ret = -EINVAL;
* this syscall writes the default timeslice value of a given process
* into the user-space timespec buffer. A value of '0' means infinity.
*/
-asmlinkage
-long sys_sched_rr_get_interval(pid_t pid, struct timespec __user *interval)
+SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
+ struct timespec __user *, interval)
{
struct task_struct *p;
unsigned int time_slice;
runtime = d->rt_runtime;
}
+#ifdef CONFIG_USER_SCHED
+ if (tg == &root_task_group) {
+ period = global_rt_period();
+ runtime = global_rt_runtime();
+ }
+#endif
+
/*
* Cannot have more runtime than the period.
*/
struct sched_entity,
run_node);
- if (vruntime == cfs_rq->min_vruntime)
+ if (!cfs_rq->curr)
vruntime = se->vruntime;
else
vruntime = min_vruntime(vruntime, se->vruntime);
u64 slice = __sched_period(cfs_rq->nr_running + !se->on_rq);
for_each_sched_entity(se) {
- struct load_weight *load = &cfs_rq->load;
+ struct load_weight *load;
+
+ cfs_rq = cfs_rq_of(se);
+ load = &cfs_rq->load;
if (unlikely(!se->on_rq)) {
struct load_weight lw = cfs_rq->load;
unsigned long thresh = sysctl_sched_latency;
/*
- * convert the sleeper threshold into virtual time
+ * Convert the sleeper threshold into virtual time.
+ * SCHED_IDLE is a special sub-class. We care about
+ * fairness only relative to other SCHED_IDLE tasks,
+ * all of which have the same weight.
*/
- if (sched_feat(NORMALIZED_SLEEPER))
+ if (sched_feat(NORMALIZED_SLEEPER) &&
+ task_of(se)->policy != SCHED_IDLE)
thresh = calc_delta_fair(thresh, se);
vruntime -= thresh;
static void set_last_buddy(struct sched_entity *se)
{
- for_each_sched_entity(se)
- cfs_rq_of(se)->last = se;
+ if (likely(task_of(se)->policy != SCHED_IDLE)) {
+ for_each_sched_entity(se)
+ cfs_rq_of(se)->last = se;
+ }
}
static void set_next_buddy(struct sched_entity *se)
{
- for_each_sched_entity(se)
- cfs_rq_of(se)->next = se;
+ if (likely(task_of(se)->policy != SCHED_IDLE)) {
+ for_each_sched_entity(se)
+ cfs_rq_of(se)->next = se;
+ }
}
/*
return;
/*
- * Batch tasks do not preempt (their preemption is driven by
+ * Batch and idle tasks do not preempt (their preemption is driven by
* the tick):
*/
- if (unlikely(p->policy == SCHED_BATCH))
+ if (unlikely(p->policy != SCHED_NORMAL))
return;
+ /* Idle tasks are by definition preempted by everybody. */
+ if (unlikely(curr->policy == SCHED_IDLE)) {
+ resched_task(curr);
+ return;
+ }
+
if (!sched_feat(WAKEUP_PREEMPT))
return;
* System call entry points.
*/
-asmlinkage long sys_restart_syscall(void)
+SYSCALL_DEFINE0(restart_syscall)
{
struct restart_block *restart = ¤t_thread_info()->restart_block;
return restart->fn(restart);
return error;
}
-asmlinkage long
-sys_rt_sigprocmask(int how, sigset_t __user *set, sigset_t __user *oset, size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
+ sigset_t __user *, oset, size_t, sigsetsize)
{
int error = -EINVAL;
sigset_t old_set, new_set;
return error;
}
-asmlinkage long
-sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
{
return do_sigpending(set, sigsetsize);
}
#endif
-asmlinkage long
-sys_rt_sigtimedwait(const sigset_t __user *uthese,
- siginfo_t __user *uinfo,
- const struct timespec __user *uts,
- size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
+ siginfo_t __user *, uinfo, const struct timespec __user *, uts,
+ size_t, sigsetsize)
{
int ret, sig;
sigset_t these;
return ret;
}
-asmlinkage long
-sys_kill(pid_t pid, int sig)
+SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
{
struct siginfo info;
* exists but it's not belonging to the target process anymore. This
* method solves the problem of threads exiting and PIDs getting reused.
*/
-asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
+SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
{
/* This is only valid for single tasks */
if (pid <= 0 || tgid <= 0)
/*
* Send a signal to only one task, even if it's a CLONE_THREAD task.
*/
-asmlinkage long
-sys_tkill(pid_t pid, int sig)
+SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
{
/* This is only valid for single tasks */
if (pid <= 0)
return do_tkill(0, pid, sig);
}
-asmlinkage long
-sys_rt_sigqueueinfo(pid_t pid, int sig, siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
+ siginfo_t __user *, uinfo)
{
siginfo_t info;
#ifdef __ARCH_WANT_SYS_SIGPENDING
-asmlinkage long
-sys_sigpending(old_sigset_t __user *set)
+SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
{
return do_sigpending(set, sizeof(*set));
}
/* Some platforms have their own version with special arguments others
support only sys_rt_sigprocmask. */
-asmlinkage long
-sys_sigprocmask(int how, old_sigset_t __user *set, old_sigset_t __user *oset)
+SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
+ old_sigset_t __user *, oset)
{
int error;
old_sigset_t old_set, new_set;
#endif /* __ARCH_WANT_SYS_SIGPROCMASK */
#ifdef __ARCH_WANT_SYS_RT_SIGACTION
-asmlinkage long
-sys_rt_sigaction(int sig,
- const struct sigaction __user *act,
- struct sigaction __user *oact,
- size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigaction, int, sig,
+ const struct sigaction __user *, act,
+ struct sigaction __user *, oact,
+ size_t, sigsetsize)
{
struct k_sigaction new_sa, old_sa;
int ret = -EINVAL;
/*
* For backwards compatibility. Functionality superseded by sigprocmask.
*/
-asmlinkage long
-sys_sgetmask(void)
+SYSCALL_DEFINE0(sgetmask)
{
/* SMP safe */
return current->blocked.sig[0];
}
-asmlinkage long
-sys_ssetmask(int newmask)
+SYSCALL_DEFINE1(ssetmask, int, newmask)
{
int old;
/*
* For backwards compatibility. Functionality superseded by sigaction.
*/
-asmlinkage unsigned long
-sys_signal(int sig, __sighandler_t handler)
+SYSCALL_DEFINE2(signal, int, sig, __sighandler_t, handler)
{
struct k_sigaction new_sa, old_sa;
int ret;
#ifdef __ARCH_WANT_SYS_PAUSE
-asmlinkage long
-sys_pause(void)
+SYSCALL_DEFINE0(pause)
{
current->state = TASK_INTERRUPTIBLE;
schedule();
#endif
#ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
{
sigset_t newset;
return error;
}
-asmlinkage long sys_setpriority(int which, int who, int niceval)
+SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
{
struct task_struct *g, *p;
struct user_struct *user;
* has been offset by 20 (ie it returns 40..1 instead of -20..19)
* to stay compatible.
*/
-asmlinkage long sys_getpriority(int which, int who)
+SYSCALL_DEFINE2(getpriority, int, which, int, who)
{
struct task_struct *g, *p;
struct user_struct *user;
*
* reboot doesn't sync: do that yourself before calling this.
*/
-asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
+SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
+ void __user *, arg)
{
char buffer[256];
* SMP: There are not races, the GIDs are checked only by filesystem
* operations (as far as semantic preservation is concerned).
*/
-asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
+SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
{
const struct cred *old;
struct cred *new;
*
* SMP: Same implicit races as above.
*/
-asmlinkage long sys_setgid(gid_t gid)
+SYSCALL_DEFINE1(setgid, gid_t, gid)
{
const struct cred *old;
struct cred *new;
* 100% compatible with BSD. A program which uses just setuid() will be
* 100% compatible with POSIX with saved IDs.
*/
-asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
+SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
{
const struct cred *old;
struct cred *new;
* will allow a root program to temporarily drop privileges and be able to
* regain them by swapping the real and effective uid.
*/
-asmlinkage long sys_setuid(uid_t uid)
+SYSCALL_DEFINE1(setuid, uid_t, uid)
{
const struct cred *old;
struct cred *new;
* This function implements a generic ability to update ruid, euid,
* and suid. This allows you to implement the 4.4 compatible seteuid().
*/
-asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
+SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
{
const struct cred *old;
struct cred *new;
return retval;
}
-asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)
{
const struct cred *cred = current_cred();
int retval;
/*
* Same as above, but for rgid, egid, sgid.
*/
-asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
+SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
{
const struct cred *old;
struct cred *new;
return retval;
}
-asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
+SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)
{
const struct cred *cred = current_cred();
int retval;
* whatever uid it wants to). It normally shadows "euid", except when
* explicitly set by setfsuid() or for access..
*/
-asmlinkage long sys_setfsuid(uid_t uid)
+SYSCALL_DEFINE1(setfsuid, uid_t, uid)
{
const struct cred *old;
struct cred *new;
/*
* Samma på svenska..
*/
-asmlinkage long sys_setfsgid(gid_t gid)
+SYSCALL_DEFINE1(setfsgid, gid_t, gid)
{
const struct cred *old;
struct cred *new;
tms->tms_cstime = cputime_to_clock_t(cstime);
}
-asmlinkage long sys_times(struct tms __user * tbuf)
+SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
{
if (tbuf) {
struct tms tmp;
* Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
* LBT 04.03.94
*/
-asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
+SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
{
struct task_struct *p;
struct task_struct *group_leader = current->group_leader;
return err;
}
-asmlinkage long sys_getpgid(pid_t pid)
+SYSCALL_DEFINE1(getpgid, pid_t, pid)
{
struct task_struct *p;
struct pid *grp;
#ifdef __ARCH_WANT_SYS_GETPGRP
-asmlinkage long sys_getpgrp(void)
+SYSCALL_DEFINE0(getpgrp)
{
return sys_getpgid(0);
}
#endif
-asmlinkage long sys_getsid(pid_t pid)
+SYSCALL_DEFINE1(getsid, pid_t, pid)
{
struct task_struct *p;
struct pid *sid;
return retval;
}
-asmlinkage long sys_setsid(void)
+SYSCALL_DEFINE0(setsid)
{
struct task_struct *group_leader = current->group_leader;
struct pid *sid = task_pid(group_leader);
EXPORT_SYMBOL(set_current_groups);
-asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
{
const struct cred *cred = current_cred();
int i;
* without another task interfering.
*/
-asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
{
struct group_info *group_info;
int retval;
DECLARE_RWSEM(uts_sem);
-asmlinkage long sys_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
int errno = 0;
return errno;
}
-asmlinkage long sys_sethostname(char __user *name, int len)
+SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
{
int errno;
char tmp[__NEW_UTS_LEN];
#ifdef __ARCH_WANT_SYS_GETHOSTNAME
-asmlinkage long sys_gethostname(char __user *name, int len)
+SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
{
int i, errno;
struct new_utsname *u;
* Only setdomainname; getdomainname can be implemented by calling
* uname()
*/
-asmlinkage long sys_setdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
{
int errno;
char tmp[__NEW_UTS_LEN];
return errno;
}
-asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
if (resource >= RLIM_NLIMITS)
return -EINVAL;
* Back compatibility for getrlimit. Needed for some apps.
*/
-asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
+ struct rlimit __user *, rlim)
{
struct rlimit x;
if (resource >= RLIM_NLIMITS)
#endif
-asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
{
struct rlimit new_rlim, *old_rlim;
int retval;
return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
}
-asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
+SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
{
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
who != RUSAGE_THREAD)
return getrusage(current, who, ru);
}
-asmlinkage long sys_umask(int mask)
+SYSCALL_DEFINE1(umask, int, mask)
{
mask = xchg(¤t->fs->umask, mask & S_IRWXUGO);
return mask;
}
-asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
- unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
+ unsigned long, arg4, unsigned long, arg5)
{
struct task_struct *me = current;
unsigned char comm[sizeof(me->comm)];
return error;
}
-asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
- struct getcpu_cache __user *unused)
+SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
+ struct getcpu_cache __user *, unused)
{
int err = 0;
int cpu = raw_smp_processor_id();
cond_syscall(sys_io_submit);
cond_syscall(sys_io_cancel);
cond_syscall(sys_io_getevents);
+cond_syscall(sys_syslog);
/* arch-specific weak syscall entries */
cond_syscall(sys_pciconfig_read);
#ifdef CONFIG_IA64
extern int no_unaligned_warning;
+extern int unaligned_dump_stack;
#endif
#ifdef CONFIG_RT_MUTEXES
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "unaligned-dump-stack",
+ .data = &unaligned_dump_stack,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#endif
#ifdef CONFIG_DETECT_SOFTLOCKUP
{
return error;
}
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
{
struct __sysctl_args tmp;
int error;
#else /* CONFIG_SYSCTL_SYSCALL */
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
{
struct __sysctl_args tmp;
int error;
* why not move it into the appropriate arch directory (for those
* architectures that need it).
*/
-asmlinkage long sys_time(time_t __user * tloc)
+SYSCALL_DEFINE1(time, time_t __user *, tloc)
{
time_t i = get_seconds();
* architectures that need it).
*/
-asmlinkage long sys_stime(time_t __user *tptr)
+SYSCALL_DEFINE1(stime, time_t __user *, tptr)
{
struct timespec tv;
int err;
#endif /* __ARCH_WANT_SYS_TIME */
-asmlinkage long sys_gettimeofday(struct timeval __user *tv,
- struct timezone __user *tz)
+SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv,
+ struct timezone __user *, tz)
{
if (likely(tv != NULL)) {
struct timeval ktv;
return 0;
}
-asmlinkage long sys_settimeofday(struct timeval __user *tv,
- struct timezone __user *tz)
+SYSCALL_DEFINE2(settimeofday, struct timeval __user *, tv,
+ struct timezone __user *, tz)
{
struct timeval user_tv;
struct timespec new_ts;
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
-asmlinkage long sys_adjtimex(struct timex __user *txc_p)
+SYSCALL_DEFINE1(adjtimex, struct timex __user *, txc_p)
{
struct timex txc; /* Local copy of parameter */
int ret;
* For backwards compatibility? This can be done in libc so Alpha
* and all newer ports shouldn't need it.
*/
-asmlinkage unsigned long sys_alarm(unsigned int seconds)
+SYSCALL_DEFINE1(alarm, unsigned int, seconds)
{
return alarm_setitimer(seconds);
}
*
* This is SMP safe as current->tgid does not change.
*/
-asmlinkage long sys_getpid(void)
+SYSCALL_DEFINE0(getpid)
{
return task_tgid_vnr(current);
}
* value of ->real_parent under rcu_read_lock(), see
* release_task()->call_rcu(delayed_put_task_struct).
*/
-asmlinkage long sys_getppid(void)
+SYSCALL_DEFINE0(getppid)
{
int pid;
return pid;
}
-asmlinkage long sys_getuid(void)
+SYSCALL_DEFINE0(getuid)
{
/* Only we change this so SMP safe */
return current_uid();
}
-asmlinkage long sys_geteuid(void)
+SYSCALL_DEFINE0(geteuid)
{
/* Only we change this so SMP safe */
return current_euid();
}
-asmlinkage long sys_getgid(void)
+SYSCALL_DEFINE0(getgid)
{
/* Only we change this so SMP safe */
return current_gid();
}
-asmlinkage long sys_getegid(void)
+SYSCALL_DEFINE0(getegid)
{
/* Only we change this so SMP safe */
return current_egid();
EXPORT_SYMBOL(schedule_timeout_uninterruptible);
/* Thread ID - the internal kernel "pid" */
-asmlinkage long sys_gettid(void)
+SYSCALL_DEFINE0(gettid)
{
return task_pid_vnr(current);
}
return 0;
}
-asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
{
struct sysinfo val;
#include <asm/uaccess.h>
-asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(chown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
{
long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(lchown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
{
long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(fchown16, unsigned int, fd, old_uid_t, user, old_gid_t, group)
{
long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid)
+SYSCALL_DEFINE2(setregid16, old_gid_t, rgid, old_gid_t, egid)
{
long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setgid16, old_gid_t, gid)
{
long ret = sys_setgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid)
+SYSCALL_DEFINE2(setreuid16, old_uid_t, ruid, old_uid_t, euid)
{
long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setuid16, old_uid_t, uid)
{
long ret = sys_setuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid)
+SYSCALL_DEFINE3(setresuid16, old_uid_t, ruid, old_uid_t, euid, old_uid_t, suid)
{
long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
low2highuid(suid));
return ret;
}
-asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid, old_uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid16, old_uid_t __user *, ruid, old_uid_t __user *, euid, old_uid_t __user *, suid)
{
const struct cred *cred = current_cred();
int retval;
return retval;
}
-asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid)
+SYSCALL_DEFINE3(setresgid16, old_gid_t, rgid, old_gid_t, egid, old_gid_t, sgid)
{
long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
low2highgid(sgid));
return ret;
}
-asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid, old_gid_t __user *sgid)
+
+SYSCALL_DEFINE3(getresgid16, old_gid_t __user *, rgid, old_gid_t __user *, egid, old_gid_t __user *, sgid)
{
const struct cred *cred = current_cred();
int retval;
return retval;
}
-asmlinkage long sys_setfsuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setfsuid16, old_uid_t, uid)
{
long ret = sys_setfsuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
return ret;
}
-asmlinkage long sys_setfsgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setfsgid16, old_gid_t, gid)
{
long ret = sys_setfsgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
return 0;
}
-asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
{
const struct cred *cred = current_cred();
int i;
return i;
}
-asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
{
struct group_info *group_info;
int retval;
return retval;
}
-asmlinkage long sys_getuid16(void)
+SYSCALL_DEFINE0(getuid16)
{
return high2lowuid(current_uid());
}
-asmlinkage long sys_geteuid16(void)
+SYSCALL_DEFINE0(geteuid16)
{
return high2lowuid(current_euid());
}
-asmlinkage long sys_getgid16(void)
+SYSCALL_DEFINE0(getgid16)
{
return high2lowgid(current_gid());
}
-asmlinkage long sys_getegid16(void)
+SYSCALL_DEFINE0(getegid16)
{
return high2lowgid(current_egid());
}
* Uniprocessor-only support functions. The counterpart to kernel/smp.c
*/
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/smp.h>
{
while (idp->id_free_cnt < IDR_FREE_MAX) {
struct idr_layer *new;
- new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
+ new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
if (new == NULL)
return (0);
move_to_free_list(idp, new);
* and go back to the idr_pre_get() call. If the idr is full, it will
* return -ENOSPC.
*
- * @id returns a value in the range 0 ... 0x7fffffff
+ * @id returns a value in the range @starting_id ... 0x7fffffff
*/
int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
{
}
EXPORT_SYMBOL(idr_replace);
-static void idr_cache_ctor(void *idr_layer)
-{
- memset(idr_layer, 0, sizeof(struct idr_layer));
-}
-
void __init idr_init_cache(void)
{
idr_layer_cache = kmem_cache_create("idr_layer_cache",
- sizeof(struct idr_layer), 0, SLAB_PANIC,
- idr_cache_ctor);
+ sizeof(struct idr_layer), 0, SLAB_PANIC, NULL);
}
/**
* and go back to the ida_pre_get() call. If the ida is full, it will
* return -ENOSPC.
*
- * @p_id returns a value in the range 0 ... 0x7fffffff.
+ * @p_id returns a value in the range @starting_id ... 0x7fffffff.
*/
int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
{
* POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
* deactivate the pages and clear PG_Referenced.
*/
-asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
+SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
{
struct file *file = fget(fd);
struct address_space *mapping;
fput(file);
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64_64(long fd, loff_t offset, loff_t len, long advice)
+{
+ return SYSC_fadvise64_64((int) fd, offset, len, (int) advice);
+}
+SYSCALL_ALIAS(sys_fadvise64_64, SyS_fadvise64_64);
+#endif
#ifdef __ARCH_WANT_SYS_FADVISE64
-asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice)
+SYSCALL_DEFINE(fadvise64)(int fd, loff_t offset, size_t len, int advice)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64(long fd, loff_t offset, long len, long advice)
+{
+ return SYSC_fadvise64((int) fd, offset, (size_t)len, (int)advice);
+}
+SYSCALL_ALIAS(sys_fadvise64, SyS_fadvise64);
+#endif
#endif
return 0;
}
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count)
+SYSCALL_DEFINE(readahead)(int fd, loff_t offset, size_t count)
{
ssize_t ret;
struct file *file;
}
return ret;
}
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_readahead(long fd, loff_t offset, long count)
+{
+ return SYSC_readahead((int) fd, offset, (size_t) count);
+}
+SYSCALL_ALIAS(sys_readahead, SyS_readahead);
+#endif
#ifdef CONFIG_MMU
/**
* and the vma's default protection is used. Arbitrary protections
* might be implemented in the future.
*/
-asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
- unsigned long prot, unsigned long pgoff, unsigned long flags)
+SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
+ unsigned long, prot, unsigned long, pgoff, unsigned long, flags)
{
struct mm_struct *mm = current->mm;
struct address_space *mapping;
* -EBADF - map exists, but area maps something that isn't a file.
* -EAGAIN - a kernel resource was temporarily unavailable.
*/
-asmlinkage long sys_madvise(unsigned long start, size_t len_in, int behavior)
+SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
{
unsigned long end, tmp;
struct vm_area_struct * vma, *prev;
return;
pc = lookup_page_cgroup(page);
+ /*
+ * Used bit is set without atomic ops but after smp_wmb().
+ * For making pc->mem_cgroup visible, insert smp_rmb() here.
+ */
smp_rmb();
/* unused page is not rotated. */
if (!PageCgroupUsed(pc))
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
- /* barrier to sync with "charge" */
+ /*
+ * Used bit is set without atomic ops but after smp_wmb().
+ * For making pc->mem_cgroup visible, insert smp_rmb() here.
+ */
smp_rmb();
if (!PageCgroupUsed(pc))
return;
return NULL;
pc = lookup_page_cgroup(page);
+ /*
+ * Used bit is set without atomic ops but after smp_wmb().
+ * For making pc->mem_cgroup visible, insert smp_rmb() here.
+ */
+ smp_rmb();
+ if (!PageCgroupUsed(pc))
+ return NULL;
+
mz = page_cgroup_zoneinfo(pc);
if (!mz)
return NULL;
* called with hierarchy_mutex held
*/
static struct mem_cgroup *
-mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
+__mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
{
struct cgroup *cgroup, *curr_cgroup, *root_cgroup;
/*
* Walk down to children
*/
- mem_cgroup_put(curr);
cgroup = list_entry(curr_cgroup->children.next,
struct cgroup, sibling);
curr = mem_cgroup_from_cont(cgroup);
- mem_cgroup_get(curr);
goto done;
}
visit_parent:
if (curr_cgroup == root_cgroup) {
- mem_cgroup_put(curr);
- curr = root_mem;
- mem_cgroup_get(curr);
+ /* caller handles NULL case */
+ curr = NULL;
goto done;
}
* Goto next sibling
*/
if (curr_cgroup->sibling.next != &curr_cgroup->parent->children) {
- mem_cgroup_put(curr);
cgroup = list_entry(curr_cgroup->sibling.next, struct cgroup,
sibling);
curr = mem_cgroup_from_cont(cgroup);
- mem_cgroup_get(curr);
goto done;
}
goto visit_parent;
done:
- root_mem->last_scanned_child = curr;
return curr;
}
* that to reclaim free pages from.
*/
static struct mem_cgroup *
-mem_cgroup_get_first_node(struct mem_cgroup *root_mem)
+mem_cgroup_get_next_node(struct mem_cgroup *root_mem)
{
struct cgroup *cgroup;
- struct mem_cgroup *ret;
+ struct mem_cgroup *orig, *next;
bool obsolete;
- obsolete = mem_cgroup_is_obsolete(root_mem->last_scanned_child);
-
/*
* Scan all children under the mem_cgroup mem
*/
mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
+
+ orig = root_mem->last_scanned_child;
+ obsolete = mem_cgroup_is_obsolete(orig);
+
if (list_empty(&root_mem->css.cgroup->children)) {
- ret = root_mem;
+ /*
+ * root_mem might have children before and last_scanned_child
+ * may point to one of them. We put it later.
+ */
+ if (orig)
+ VM_BUG_ON(!obsolete);
+ next = NULL;
goto done;
}
- if (!root_mem->last_scanned_child || obsolete) {
-
- if (obsolete && root_mem->last_scanned_child)
- mem_cgroup_put(root_mem->last_scanned_child);
-
+ if (!orig || obsolete) {
cgroup = list_first_entry(&root_mem->css.cgroup->children,
struct cgroup, sibling);
- ret = mem_cgroup_from_cont(cgroup);
- mem_cgroup_get(ret);
+ next = mem_cgroup_from_cont(cgroup);
} else
- ret = mem_cgroup_get_next_node(root_mem->last_scanned_child,
- root_mem);
+ next = __mem_cgroup_get_next_node(orig, root_mem);
done:
- root_mem->last_scanned_child = ret;
+ if (next)
+ mem_cgroup_get(next);
+ root_mem->last_scanned_child = next;
+ if (orig)
+ mem_cgroup_put(orig);
mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
- return ret;
+ return (next) ? next : root_mem;
}
static bool mem_cgroup_check_under_limit(struct mem_cgroup *mem)
* but there might be left over accounting, even after children
* have left.
*/
- ret = try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
+ ret += try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
get_swappiness(root_mem));
if (mem_cgroup_check_under_limit(root_mem))
- return 0;
+ return 1; /* indicate reclaim has succeeded */
if (!root_mem->use_hierarchy)
return ret;
- next_mem = mem_cgroup_get_first_node(root_mem);
+ next_mem = mem_cgroup_get_next_node(root_mem);
while (next_mem != root_mem) {
if (mem_cgroup_is_obsolete(next_mem)) {
- mem_cgroup_put(next_mem);
- next_mem = mem_cgroup_get_first_node(root_mem);
+ next_mem = mem_cgroup_get_next_node(root_mem);
continue;
}
- ret = try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
+ ret += try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
get_swappiness(next_mem));
if (mem_cgroup_check_under_limit(root_mem))
- return 0;
- mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
- next_mem = mem_cgroup_get_next_node(next_mem, root_mem);
- mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
+ return 1; /* indicate reclaim has succeeded */
+ next_mem = mem_cgroup_get_next_node(root_mem);
}
return ret;
}
ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, gfp_mask,
noswap);
+ if (ret)
+ continue;
/*
* try_to_free_mem_cgroup_pages() might not give us a full
if (pc->mem_cgroup != from)
goto out;
- css_put(&from->css);
res_counter_uncharge(&from->res, PAGE_SIZE);
mem_cgroup_charge_statistics(from, pc, false);
if (do_swap_account)
res_counter_uncharge(&from->memsw, PAGE_SIZE);
+ css_put(&from->css);
+
+ css_get(&to->css);
pc->mem_cgroup = to;
mem_cgroup_charge_statistics(to, pc, true);
- css_get(&to->css);
ret = 0;
out:
unlock_page_cgroup(pc);
if (ret || !parent)
return ret;
- if (!get_page_unless_zero(page))
- return -EBUSY;
+ if (!get_page_unless_zero(page)) {
+ ret = -EBUSY;
+ goto uncharge;
+ }
ret = isolate_lru_page(page);
ret = mem_cgroup_move_account(pc, child, parent);
- /* drop extra refcnt by try_charge() (move_account increment one) */
- css_put(&parent->css);
putback_lru_page(page);
if (!ret) {
put_page(page);
+ /* drop extra refcnt by try_charge() */
+ css_put(&parent->css);
return 0;
}
- /* uncharge if move fails */
+
cancel:
+ put_page(page);
+uncharge:
+ /* drop extra refcnt by try_charge() */
+ css_put(&parent->css);
+ /* uncharge if move fails */
res_counter_uncharge(&parent->res, PAGE_SIZE);
if (do_swap_account)
res_counter_uncharge(&parent->memsw, PAGE_SIZE);
- put_page(page);
return ret;
}
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup *parent;
+
if (val > 100)
return -EINVAL;
return -EINVAL;
parent = mem_cgroup_from_cont(cgrp->parent);
+
+ cgroup_lock();
+
/* If under hierarchy, only empty-root can set this value */
if ((parent->use_hierarchy) ||
- (memcg->use_hierarchy && !list_empty(&cgrp->children)))
+ (memcg->use_hierarchy && !list_empty(&cgrp->children))) {
+ cgroup_unlock();
return -EINVAL;
+ }
spin_lock(&memcg->reclaim_param_lock);
memcg->swappiness = val;
spin_unlock(&memcg->reclaim_param_lock);
+ cgroup_unlock();
+
return 0;
}
}
#endif
-static struct cgroup_subsys_state *
+static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
struct mem_cgroup *mem, *parent;
static void mem_cgroup_destroy(struct cgroup_subsys *ss,
struct cgroup *cont)
{
- mem_cgroup_put(mem_cgroup_from_cont(cont));
+ struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *last_scanned_child = mem->last_scanned_child;
+
+ if (last_scanned_child) {
+ VM_BUG_ON(!mem_cgroup_is_obsolete(last_scanned_child));
+ mem_cgroup_put(last_scanned_child);
+ }
+ mem_cgroup_put(mem);
}
static int mem_cgroup_populate(struct cgroup_subsys *ss,
unsigned long pfn)
{
int ret;
+ pgprot_t pgprot = vma->vm_page_prot;
/*
* Technically, architectures with pte_special can avoid all these
* restrictions (same for remap_pfn_range). However we would like
if (addr < vma->vm_start || addr >= vma->vm_end)
return -EFAULT;
- if (track_pfn_vma_new(vma, vma->vm_page_prot, pfn, PAGE_SIZE))
+ if (track_pfn_vma_new(vma, &pgprot, pfn, PAGE_SIZE))
return -EINVAL;
- ret = insert_pfn(vma, addr, pfn, vma->vm_page_prot);
+ ret = insert_pfn(vma, addr, pfn, pgprot);
if (ret)
untrack_pfn_vma(vma, pfn, PAGE_SIZE);
vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
- err = track_pfn_vma_new(vma, prot, pfn, PAGE_ALIGN(size));
- if (err)
+ err = track_pfn_vma_new(vma, &prot, pfn, PAGE_ALIGN(size));
+ if (err) {
+ /*
+ * To indicate that track_pfn related cleanup is not
+ * needed from higher level routine calling unmap_vmas
+ */
+ vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP);
return -EINVAL;
+ }
BUG_ON(addr >= end);
pfn -= addr >> PAGE_SHIFT;
#ifdef CONFIG_PROVE_LOCKING
void might_fault(void)
{
+ /*
+ * Some code (nfs/sunrpc) uses socket ops on kernel memory while
+ * holding the mmap_sem, this is safe because kernel memory doesn't
+ * get paged out, therefore we'll never actually fault, and the
+ * below annotations will generate false positives.
+ */
+ if (segment_eq(get_fs(), KERNEL_DS))
+ return;
+
might_sleep();
/*
* it would be nicer only to annotate paths which are not under
return copy_to_user(mask, nodes_addr(*nodes), copy) ? -EFAULT : 0;
}
-asmlinkage long sys_mbind(unsigned long start, unsigned long len,
- unsigned long mode,
- unsigned long __user *nmask, unsigned long maxnode,
- unsigned flags)
+SYSCALL_DEFINE6(mbind, unsigned long, start, unsigned long, len,
+ unsigned long, mode, unsigned long __user *, nmask,
+ unsigned long, maxnode, unsigned, flags)
{
nodemask_t nodes;
int err;
}
/* Set the process memory policy */
-asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
- unsigned long maxnode)
+SYSCALL_DEFINE3(set_mempolicy, int, mode, unsigned long __user *, nmask,
+ unsigned long, maxnode)
{
int err;
nodemask_t nodes;
return do_set_mempolicy(mode, flags, &nodes);
}
-asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
- const unsigned long __user *old_nodes,
- const unsigned long __user *new_nodes)
+SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
+ const unsigned long __user *, old_nodes,
+ const unsigned long __user *, new_nodes)
{
const struct cred *cred = current_cred(), *tcred;
struct mm_struct *mm;
/* Retrieve NUMA policy */
-asmlinkage long sys_get_mempolicy(int __user *policy,
- unsigned long __user *nmask,
- unsigned long maxnode,
- unsigned long addr, unsigned long flags)
+SYSCALL_DEFINE5(get_mempolicy, int __user *, policy,
+ unsigned long __user *, nmask, unsigned long, maxnode,
+ unsigned long, addr, unsigned long, flags)
{
int err;
int uninitialized_var(pval);
* Move a list of pages in the address space of the currently executing
* process.
*/
-asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
- const void __user * __user *pages,
- const int __user *nodes,
- int __user *status, int flags)
+SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
+ const void __user * __user *, pages,
+ const int __user *, nodes,
+ int __user *, status, int, flags)
{
const struct cred *cred = current_cred(), *tcred;
struct task_struct *task;
* mapped
* -EAGAIN - A kernel resource was temporarily unavailable.
*/
-asmlinkage long sys_mincore(unsigned long start, size_t len,
- unsigned char __user * vec)
+SYSCALL_DEFINE3(mincore, unsigned long, start, size_t, len,
+ unsigned char __user *, vec)
{
long retval;
unsigned long pages;
return error;
}
-asmlinkage long sys_mlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
{
unsigned long locked;
unsigned long lock_limit;
return error;
}
-asmlinkage long sys_munlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
{
int ret;
return 0;
}
-asmlinkage long sys_mlockall(int flags)
+SYSCALL_DEFINE1(mlockall, int, flags)
{
unsigned long lock_limit;
int ret = -EINVAL;
return ret;
}
-asmlinkage long sys_munlockall(void)
+SYSCALL_DEFINE0(munlockall)
{
int ret;
return next;
}
-asmlinkage unsigned long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
{
unsigned long rlim, retval;
unsigned long newbrk, oldbrk;
EXPORT_SYMBOL(do_munmap);
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
{
int ret;
struct mm_struct *mm = current->mm;
return error;
}
-asmlinkage long
-sys_mprotect(unsigned long start, size_t len, unsigned long prot)
+SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
+ unsigned long, prot)
{
unsigned long vm_flags, nstart, end, tmp, reqprot;
struct vm_area_struct *vma, *prev;
return ret;
}
-asmlinkage unsigned long sys_mremap(unsigned long addr,
- unsigned long old_len, unsigned long new_len,
- unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+ unsigned long, new_len, unsigned long, flags,
+ unsigned long, new_addr)
{
unsigned long ret;
* So by _not_ starting I/O in MS_ASYNC we provide complete flexibility to
* applications.
*/
-asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
+SYSCALL_DEFINE3(msync, unsigned long, start, size_t, len, int, flags)
{
unsigned long end;
struct mm_struct *mm = current->mm;
* to a regular file. in this case, the unmapping will need
* to invoke file system routines that need the global lock.
*/
-asmlinkage unsigned long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
{
struct mm_struct *mm = current->mm;
}
EXPORT_SYMBOL(do_munmap);
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
{
int ret;
struct mm_struct *mm = current->mm;
}
EXPORT_SYMBOL(do_mremap);
-asmlinkage
-unsigned long sys_mremap(unsigned long addr,
- unsigned long old_len, unsigned long new_len,
- unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+ unsigned long, new_len, unsigned long, flags,
+ unsigned long, new_addr)
{
unsigned long ret;
return ret;
}
-asmlinkage long sys_swapoff(const char __user * specialfile)
+SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
{
struct swap_info_struct * p = NULL;
unsigned short *swap_map;
*
* The swapon system call
*/
-asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
+SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
{
struct swap_info_struct * p;
char *name = NULL;
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/rbtree.h>
#include <linux/radix-tree.h>
#include <linux/rcupdate.h>
+#include <linux/bootmem.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
int sync, int force_flush)
{
- static DEFINE_MUTEX(purge_lock);
+ static DEFINE_SPINLOCK(purge_lock);
LIST_HEAD(valist);
struct vmap_area *va;
int nr = 0;
* the case that isn't actually used at the moment anyway.
*/
if (!sync && !force_flush) {
- if (!mutex_trylock(&purge_lock))
+ if (!spin_trylock(&purge_lock))
return;
} else
- mutex_lock(&purge_lock);
+ spin_lock(&purge_lock);
rcu_read_lock();
list_for_each_entry_rcu(va, &vmap_area_list, list) {
__free_vmap_area(va);
spin_unlock(&vmap_area_lock);
}
- mutex_unlock(&purge_lock);
+ spin_unlock(&purge_lock);
}
/*
void __init vmalloc_init(void)
{
+ struct vmap_area *va;
+ struct vm_struct *tmp;
int i;
for_each_possible_cpu(i) {
vbq->nr_dirty = 0;
}
+ /* Import existing vmlist entries. */
+ for (tmp = vmlist; tmp; tmp = tmp->next) {
+ va = alloc_bootmem(sizeof(struct vmap_area));
+ va->flags = tmp->flags | VM_VM_AREA;
+ va->va_start = (unsigned long)tmp->addr;
+ va->va_end = va->va_start + tmp->size;
+ __insert_vmap_area(va);
+ }
vmap_initialized = true;
}
guest partitions and a host partition.
config NET_9P_RDMA
- depends on INET && INFINIBAND && EXPERIMENTAL
+ depends on INET && INFINIBAND && INFINIBAND_ADDR_TRANS && EXPERIMENTAL
tristate "9P RDMA Transport (Experimental)"
help
This builds support for an RDMA transport.
static int brnf_call_iptables __read_mostly = 1;
static int brnf_call_ip6tables __read_mostly = 1;
static int brnf_call_arptables __read_mostly = 1;
-static int brnf_filter_vlan_tagged __read_mostly = 1;
-static int brnf_filter_pppoe_tagged __read_mostly = 1;
+static int brnf_filter_vlan_tagged __read_mostly = 0;
+static int brnf_filter_pppoe_tagged __read_mostly = 0;
#else
-#define brnf_filter_vlan_tagged 1
-#define brnf_filter_pppoe_tagged 1
+#define brnf_filter_vlan_tagged 0
+#define brnf_filter_pppoe_tagged 0
#endif
static inline __be16 vlan_proto(const struct sk_buff *skb)
if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
IS_PPPOE_IP(skb))
pf = PF_INET;
- else
+ else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+ IS_PPPOE_IPV6(skb))
pf = PF_INET6;
+ else
+ return NF_ACCEPT;
nf_bridge_pull_encap_header(skb);
if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
IS_PPPOE_IP(skb))
pf = PF_INET;
- else
+ else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+ IS_PPPOE_IPV6(skb))
pf = PF_INET6;
+ else
+ return NF_ACCEPT;
#ifdef CONFIG_NETFILTER_DEBUG
if (skb->dst == NULL) {
{
par->match = m->u.match;
par->matchinfo = m->data;
- return m->u.match->match(skb, par);
+ return m->u.match->match(skb, par) ? EBT_MATCH : EBT_NOMATCH;
}
static inline int ebt_dev_check(char *entry, const struct net_device *device)
struct bcm_op *op = (struct bcm_op *)data;
struct bcm_msg_head msg_head;
- /* create notification to user */
- msg_head.opcode = TX_EXPIRED;
- msg_head.flags = op->flags;
- msg_head.count = op->count;
- msg_head.ival1 = op->ival1;
- msg_head.ival2 = op->ival2;
- msg_head.can_id = op->can_id;
- msg_head.nframes = 0;
-
- bcm_send_to_user(op, &msg_head, NULL, 0);
-}
-
-/*
- * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions
- */
-static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
-{
- struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
- enum hrtimer_restart ret = HRTIMER_NORESTART;
-
if (op->kt_ival1.tv64 && (op->count > 0)) {
op->count--;
- if (!op->count && (op->flags & TX_COUNTEVT))
- tasklet_schedule(&op->tsklet);
+ if (!op->count && (op->flags & TX_COUNTEVT)) {
+
+ /* create notification to user */
+ msg_head.opcode = TX_EXPIRED;
+ msg_head.flags = op->flags;
+ msg_head.count = op->count;
+ msg_head.ival1 = op->ival1;
+ msg_head.ival2 = op->ival2;
+ msg_head.can_id = op->can_id;
+ msg_head.nframes = 0;
+
+ bcm_send_to_user(op, &msg_head, NULL, 0);
+ }
}
if (op->kt_ival1.tv64 && (op->count > 0)) {
/* send (next) frame */
bcm_can_tx(op);
- hrtimer_forward(hrtimer, ktime_get(), op->kt_ival1);
- ret = HRTIMER_RESTART;
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival1),
+ HRTIMER_MODE_ABS);
} else {
if (op->kt_ival2.tv64) {
/* send (next) frame */
bcm_can_tx(op);
- hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
- ret = HRTIMER_RESTART;
+ hrtimer_start(&op->timer,
+ ktime_add(ktime_get(), op->kt_ival2),
+ HRTIMER_MODE_ABS);
}
}
+}
- return ret;
+/*
+ * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions
+ */
+static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
+{
+ struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
+
+ tasklet_schedule(&op->tsklet);
+
+ return HRTIMER_NORESTART;
}
/*
if (!(skb->dev->features & NETIF_F_GRO))
goto normal;
+ if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list)
+ goto normal;
+
rcu_read_lock();
list_for_each_entry_rcu(ptype, head, list) {
struct sk_buff *p;
void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
{
- skb_shinfo(skb)->nr_frags = 0;
-
- skb->len -= skb->data_len;
- skb->truesize -= skb->data_len;
- skb->data_len = 0;
-
__skb_pull(skb, skb_headlen(skb));
skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb));
}
/**
+ * init_dummy_netdev - init a dummy network device for NAPI
+ * @dev: device to init
+ *
+ * This takes a network device structure and initialize the minimum
+ * amount of fields so it can be used to schedule NAPI polls without
+ * registering a full blown interface. This is to be used by drivers
+ * that need to tie several hardware interfaces to a single NAPI
+ * poll scheduler due to HW limitations.
+ */
+int init_dummy_netdev(struct net_device *dev)
+{
+ /* Clear everything. Note we don't initialize spinlocks
+ * are they aren't supposed to be taken by any of the
+ * NAPI code and this dummy netdev is supposed to be
+ * only ever used for NAPI polls
+ */
+ memset(dev, 0, sizeof(struct net_device));
+
+ /* make sure we BUG if trying to hit standard
+ * register/unregister code path
+ */
+ dev->reg_state = NETREG_DUMMY;
+
+ /* initialize the ref count */
+ atomic_set(&dev->refcnt, 1);
+
+ /* NAPI wants this */
+ INIT_LIST_HEAD(&dev->napi_list);
+
+ /* a dummy interface is started by default */
+ set_bit(__LINK_STATE_PRESENT, &dev->state);
+ set_bit(__LINK_STATE_START, &dev->state);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(init_dummy_netdev);
+
+
+/**
* register_netdev - register a network device
* @dev: device to register
*
skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags;
+ skb_shinfo(skb)->nr_frags = 0;
+
+ skb->truesize -= skb->data_len;
+ skb->len -= skb->data_len;
+ skb->data_len = 0;
+
NAPI_GRO_CB(skb)->free = 1;
goto done;
}
{
/* root is playing with raw sockets. */
if (skb->len < sizeof(struct iphdr) ||
- ip_hdrlen(skb) < sizeof(struct iphdr)) {
- if (net_ratelimit())
- printk("iptable_filter: ignoring short SOCK_RAW "
- "packet.\n");
+ ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- }
-
return ipt_do_table(skb, hook, in, out,
dev_net(out)->ipv4.iptable_filter);
}
/* root is playing with raw sockets. */
if (skb->len < sizeof(struct iphdr)
- || ip_hdrlen(skb) < sizeof(struct iphdr)) {
- if (net_ratelimit())
- printk("iptable_mangle: ignoring short SOCK_RAW "
- "packet.\n");
+ || ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- }
/* Save things which could affect route */
mark = skb->mark;
{
/* root is playing with raw sockets. */
if (skb->len < sizeof(struct iphdr) ||
- ip_hdrlen(skb) < sizeof(struct iphdr)) {
- if (net_ratelimit())
- printk("iptable_raw: ignoring short SOCK_RAW "
- "packet.\n");
+ ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- }
return ipt_do_table(skb, hook, in, out,
dev_net(out)->ipv4.iptable_raw);
}
{
/* Somebody is playing with raw sockets. */
if (skb->len < sizeof(struct iphdr)
- || ip_hdrlen(skb) < sizeof(struct iphdr)) {
- if (net_ratelimit())
- printk(KERN_INFO "iptable_security: ignoring short "
- "SOCK_RAW packet.\n");
+ || ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- }
return ipt_do_table(skb, hook, in, out,
dev_net(out)->ipv4.iptable_security);
}
{
/* root is playing with raw sockets. */
if (skb->len < sizeof(struct iphdr) ||
- ip_hdrlen(skb) < sizeof(struct iphdr)) {
- if (net_ratelimit())
- printk("ipt_hook: happy cracking.\n");
+ ip_hdrlen(skb) < sizeof(struct iphdr))
return NF_ACCEPT;
- }
return nf_conntrack_in(dev_net(out), PF_INET, hooknum, skb);
}
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/nf_log.h>
-static unsigned long nf_ct_icmp_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmp_timeout __read_mostly = 30*HZ;
static bool icmp_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
struct nf_conntrack_tuple *tuple)
unsigned int offset, size_t len)
{
struct tcp_splice_state *tss = rd_desc->arg.data;
+ int ret;
- return skb_splice_bits(skb, offset, tss->pipe, tss->len, tss->flags);
+ ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+ if (ret > 0)
+ rd_desc->count -= ret;
+ return ret;
}
static int __tcp_splice_read(struct sock *sk, struct tcp_splice_state *tss)
/* Store TCP splice context information in read_descriptor_t. */
read_descriptor_t rd_desc = {
.arg.data = tss,
+ .count = tss->len,
};
return tcp_read_sock(sk, &rd_desc, tcp_splice_data_recv);
tss.len -= ret;
spliced += ret;
+ if (!timeo)
+ break;
release_sock(sk);
lock_sock(sk);
if (sk->sk_err || sk->sk_state == TCP_CLOSE ||
- (sk->sk_shutdown & RCV_SHUTDOWN) || !timeo ||
+ (sk->sk_shutdown & RCV_SHUTDOWN) ||
signal_pending(current))
break;
}
unsigned int seq;
__be32 delta;
unsigned int oldlen;
- unsigned int len;
+ unsigned int mss;
if (!pskb_may_pull(skb, sizeof(*th)))
goto out;
oldlen = (u16)~skb->len;
__skb_pull(skb, thlen);
+ mss = skb_shinfo(skb)->gso_size;
+ if (unlikely(skb->len <= mss))
+ goto out;
+
if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
/* Packet is from an untrusted source, reset gso_segs. */
int type = skb_shinfo(skb)->gso_type;
- int mss;
if (unlikely(type &
~(SKB_GSO_TCPV4 |
!(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))))
goto out;
- mss = skb_shinfo(skb)->gso_size;
skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
segs = NULL;
if (IS_ERR(segs))
goto out;
- len = skb_shinfo(skb)->gso_size;
- delta = htonl(oldlen + (thlen + len));
+ delta = htonl(oldlen + (thlen + mss));
skb = segs;
th = tcp_hdr(skb);
csum_fold(csum_partial(skb_transport_header(skb),
thlen, skb->csum));
- seq += len;
+ seq += mss;
skb = skb->next;
th = tcp_hdr(skb);
struct fib6_walker_t *w = (void*)cb->args[2];
if (w) {
+ if (cb->args[4]) {
+ cb->args[4] = 0;
+ fib6_walker_unlink(w);
+ }
cb->args[2] = 0;
kfree(w);
}
read_lock_bh(&table->tb6_lock);
res = fib6_walk_continue(w);
read_unlock_bh(&table->tb6_lock);
- if (res != 0) {
- if (res < 0)
- fib6_walker_unlink(w);
- goto end;
+ if (res <= 0) {
+ fib6_walker_unlink(w);
+ cb->args[4] = 0;
}
- fib6_walker_unlink(w);
- cb->args[4] = 0;
}
-end:
+
return res;
}
#include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
#include <net/netfilter/nf_log.h>
-static unsigned long nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
static bool icmpv6_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
struct ieee80211_sub_if_data *sdata;
u16 start_seq_num;
u8 *state;
- int ret;
+ int ret = 0;
if ((tid >= STA_TID_NUM) || !(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
return -EINVAL;
return 0;
/* Setting ad-hoc mode on non-IBSS channel is not supported. */
- if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)
+ if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
+ type == NL80211_IFTYPE_ADHOC)
return -EOPNOTSUPP;
/*
sta->flags = WLAN_STA_AUTHORIZED;
sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+ rate_control_rate_init(sta);
return sta;
}
{
struct minstrel_sta_info *mi = priv_sta;
struct minstrel_priv *mp = priv;
- struct minstrel_rate *mr_ctl;
+ struct ieee80211_local *local = hw_to_local(mp->hw);
+ struct ieee80211_rate *ctl_rate;
unsigned int i, n = 0;
unsigned int t_slot = 9; /* FIXME: get real slot time */
mi->lowest_rix = rate_lowest_index(sband, sta);
- mr_ctl = &mi->r[rix_to_ndx(mi, mi->lowest_rix)];
- mi->sp_ack_dur = mr_ctl->ack_time;
+ ctl_rate = &sband->bitrates[mi->lowest_rix];
+ mi->sp_ack_dur = ieee80211_frame_duration(local, 10, ctl_rate->bitrate,
+ !!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1);
for (i = 0; i < sband->n_bitrates; i++) {
struct minstrel_rate *mr = &mi->r[n];
mr->rix = i;
mr->bitrate = sband->bitrates[i].bitrate / 5;
- calc_rate_durations(mi, hw_to_local(mp->hw), mr,
+ calc_rate_durations(mi, local, mr,
&sband->bitrates[i]);
/* calculate maximum number of retransmissions before
const struct nf_conntrack_tuple *repl,
gfp_t gfp)
{
- struct nf_conn *ct = NULL;
+ struct nf_conn *ct;
if (unlikely(!nf_conntrack_hash_rnd_initted)) {
get_random_bytes(&nf_conntrack_hash_rnd, 4);
}
ct = nf_conntrack_alloc(net, tuple, &repl_tuple, GFP_ATOMIC);
- if (ct == NULL || IS_ERR(ct)) {
+ if (IS_ERR(ct)) {
pr_debug("Can't allocate conntrack.\n");
return (struct nf_conntrack_tuple_hash *)ct;
}
struct nf_conntrack_helper *helper;
ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC);
- if (ct == NULL || IS_ERR(ct))
+ if (IS_ERR(ct))
return -ENOMEM;
if (!cda[CTA_TIMEOUT])
have_rev = 1;
}
}
+
+ if (af != NFPROTO_UNSPEC && !have_rev)
+ return match_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
return have_rev;
}
have_rev = 1;
}
}
+
+ if (af != NFPROTO_UNSPEC && !have_rev)
+ return target_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
return have_rev;
}
static int __init time_mt_init(void)
{
+ int minutes = sys_tz.tz_minuteswest;
+
+ if (minutes < 0) /* east of Greenwich */
+ printk(KERN_INFO KBUILD_MODNAME
+ ": kernel timezone is +%02d%02d\n",
+ -minutes / 60, -minutes % 60);
+ else /* west of Greenwich */
+ printk(KERN_INFO KBUILD_MODNAME
+ ": kernel timezone is -%02d%02d\n",
+ minutes / 60, minutes % 60);
+
return xt_register_match(&xt_time_mt_reg);
}
* next pending event (0 for no event in pq).
* Note: Applied are events whose have cl->pq_key <= q->now.
*/
-static psched_time_t htb_do_events(struct htb_sched *q, int level)
+static psched_time_t htb_do_events(struct htb_sched *q, int level,
+ unsigned long start)
{
/* don't run for longer than 2 jiffies; 2 is used instead of
1 to simplify things when jiffy is going to be incremented
too soon */
- unsigned long stop_at = jiffies + 2;
+ unsigned long stop_at = start + 2;
while (time_before(jiffies, stop_at)) {
struct htb_class *cl;
long diff;
if (cl->cmode != HTB_CAN_SEND)
htb_add_to_wait_tree(q, cl, diff);
}
- /* too much load - let's continue on next jiffie */
- return q->now + PSCHED_TICKS_PER_SEC / HZ;
+ /* too much load - let's continue on next jiffie (including above) */
+ return q->now + 2 * PSCHED_TICKS_PER_SEC / HZ;
}
/* Returns class->node+prio from id-tree where classe's id is >= id. NULL
struct htb_sched *q = qdisc_priv(sch);
int level;
psched_time_t next_event;
+ unsigned long start_at;
/* try to dequeue direct packets as high prio (!) to minimize cpu work */
skb = __skb_dequeue(&q->direct_queue);
if (!sch->q.qlen)
goto fin;
q->now = psched_get_time();
+ start_at = jiffies;
next_event = q->now + 5 * PSCHED_TICKS_PER_SEC;
psched_time_t event;
if (q->now >= q->near_ev_cache[level]) {
- event = htb_do_events(q, level);
+ event = htb_do_events(q, level, start_at);
if (!event)
event = q->now + PSCHED_TICKS_PER_SEC;
q->near_ev_cache[level] = event;
} else
event = q->near_ev_cache[level];
- if (event && next_event > event)
+ if (next_event > event)
next_event = event;
m = ~q->row_mask[level];
return __sock_create(&init_net, family, type, protocol, res, 1);
}
-asmlinkage long sys_socket(int family, int type, int protocol)
+SYSCALL_DEFINE3(socket, int, family, int, type, int, protocol)
{
int retval;
struct socket *sock;
* Create a pair of connected sockets.
*/
-asmlinkage long sys_socketpair(int family, int type, int protocol,
- int __user *usockvec)
+SYSCALL_DEFINE4(socketpair, int, family, int, type, int, protocol,
+ int __user *, usockvec)
{
struct socket *sock1, *sock2;
int fd1, fd2, err;
* the protocol layer (having also checked the address is ok).
*/
-asmlinkage long sys_bind(int fd, struct sockaddr __user *umyaddr, int addrlen)
+SYSCALL_DEFINE3(bind, int, fd, struct sockaddr __user *, umyaddr, int, addrlen)
{
struct socket *sock;
struct sockaddr_storage address;
* ready for listening.
*/
-asmlinkage long sys_listen(int fd, int backlog)
+SYSCALL_DEFINE2(listen, int, fd, int, backlog)
{
struct socket *sock;
int err, fput_needed;
* clean when we restucture accept also.
*/
-asmlinkage long sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen, int flags)
+SYSCALL_DEFINE4(accept4, int, fd, struct sockaddr __user *, upeer_sockaddr,
+ int __user *, upeer_addrlen, int, flags)
{
struct socket *sock, *newsock;
struct file *newfile;
goto out_put;
}
-asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
- int __user *upeer_addrlen)
+SYSCALL_DEFINE3(accept, int, fd, struct sockaddr __user *, upeer_sockaddr,
+ int __user *, upeer_addrlen)
{
return sys_accept4(fd, upeer_sockaddr, upeer_addrlen, 0);
}
* include the -EINPROGRESS status for such sockets.
*/
-asmlinkage long sys_connect(int fd, struct sockaddr __user *uservaddr,
- int addrlen)
+SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
+ int, addrlen)
{
struct socket *sock;
struct sockaddr_storage address;
* name to user space.
*/
-asmlinkage long sys_getsockname(int fd, struct sockaddr __user *usockaddr,
- int __user *usockaddr_len)
+SYSCALL_DEFINE3(getsockname, int, fd, struct sockaddr __user *, usockaddr,
+ int __user *, usockaddr_len)
{
struct socket *sock;
struct sockaddr_storage address;
* name to user space.
*/
-asmlinkage long sys_getpeername(int fd, struct sockaddr __user *usockaddr,
- int __user *usockaddr_len)
+SYSCALL_DEFINE3(getpeername, int, fd, struct sockaddr __user *, usockaddr,
+ int __user *, usockaddr_len)
{
struct socket *sock;
struct sockaddr_storage address;
* the protocol.
*/
-asmlinkage long sys_sendto(int fd, void __user *buff, size_t len,
- unsigned flags, struct sockaddr __user *addr,
- int addr_len)
+SYSCALL_DEFINE6(sendto, int, fd, void __user *, buff, size_t, len,
+ unsigned, flags, struct sockaddr __user *, addr,
+ int, addr_len)
{
struct socket *sock;
struct sockaddr_storage address;
* Send a datagram down a socket.
*/
-asmlinkage long sys_send(int fd, void __user *buff, size_t len, unsigned flags)
+SYSCALL_DEFINE4(send, int, fd, void __user *, buff, size_t, len,
+ unsigned, flags)
{
return sys_sendto(fd, buff, len, flags, NULL, 0);
}
* sender address from kernel to user space.
*/
-asmlinkage long sys_recvfrom(int fd, void __user *ubuf, size_t size,
- unsigned flags, struct sockaddr __user *addr,
- int __user *addr_len)
+SYSCALL_DEFINE6(recvfrom, int, fd, void __user *, ubuf, size_t, size,
+ unsigned, flags, struct sockaddr __user *, addr,
+ int __user *, addr_len)
{
struct socket *sock;
struct iovec iov;
* to pass the user mode parameter for the protocols to sort out.
*/
-asmlinkage long sys_setsockopt(int fd, int level, int optname,
- char __user *optval, int optlen)
+SYSCALL_DEFINE5(setsockopt, int, fd, int, level, int, optname,
+ char __user *, optval, int, optlen)
{
int err, fput_needed;
struct socket *sock;
* to pass a user mode parameter for the protocols to sort out.
*/
-asmlinkage long sys_getsockopt(int fd, int level, int optname,
- char __user *optval, int __user *optlen)
+SYSCALL_DEFINE5(getsockopt, int, fd, int, level, int, optname,
+ char __user *, optval, int __user *, optlen)
{
int err, fput_needed;
struct socket *sock;
* Shutdown a socket.
*/
-asmlinkage long sys_shutdown(int fd, int how)
+SYSCALL_DEFINE2(shutdown, int, fd, int, how)
{
int err, fput_needed;
struct socket *sock;
* BSD sendmsg interface
*/
-asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
{
struct compat_msghdr __user *msg_compat =
(struct compat_msghdr __user *)msg;
* BSD recvmsg interface
*/
-asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg,
- unsigned int flags)
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+ unsigned int, flags)
{
struct compat_msghdr __user *msg_compat =
(struct compat_msghdr __user *)msg;
* it is set by the callees.
*/
-asmlinkage long sys_socketcall(int call, unsigned long __user *args)
+SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
{
unsigned long a[6];
unsigned long a0, a1;
}
#endif
+/* For the xfrm_usersa_info cases we have to work around some 32-bit vs.
+ * 64-bit compatability issues. On 32-bit the structure is 220 bytes, but
+ * for 64-bit it gets padded out to 224 bytes. Those bytes are just
+ * padding and don't have any content we care about. Therefore as long
+ * as we have enough bytes for the content we can make both cases work.
+ */
+
#define XMSGSIZE(type) sizeof(struct type)
static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
- [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
+ [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = 220, /* see above */
[XFRM_MSG_DELSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
[XFRM_MSG_GETSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
[XFRM_MSG_NEWPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
[XFRM_MSG_ACQUIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire),
[XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire),
[XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
- [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
+ [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = 220, /* see above */
[XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire),
[XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush),
[XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0,
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.26';
+my $V = '0.27';
use Getopt::Long qw(:config no_auto_abbrev);
my $type = '';
my $level = 0;
- my @stack = ([$type, $level]);
+ my @stack = ();
my $p;
my $c;
my $len = 0;
my $remainder;
while (1) {
+ @stack = (['', 0]) if ($#stack == -1);
+
#warn "CSB: blk<$blk> remain<$remain>\n";
# If we are about to drop off the end, pull in more
# context.
# Should not end with a space.
$to =~ s/\s+$//;
# '*'s should not have spaces between.
- while ($to =~ s/(.)\s\*/$1\*/) {
+ while ($to =~ s/\*\s+\*/\*\*/) {
}
#print "from<$from> to<$to>\n";
# Should not end with a space.
$to =~ s/\s+$//;
# '*'s should not have spaces between.
- while ($to =~ s/(.)\s\*/$1\*/) {
+ while ($to =~ s/\*\s+\*/\*\*/) {
}
# Modifiers should have spaces.
$to =~ s/(\b$Modifier$)/$1 /;
# Flatten any parentheses
$value =~ s/\)\(/\) \(/g;
- while ($value !~ /(?:$Ident|-?$Constant)\s*$Compare\s*(?:$Ident|-?$Constant)/ && $value =~ s/\([^\(\)]*\)/1/) {
+ while ($value =~ s/\[[^\{\}]*\]/1/ ||
+ $value !~ /(?:$Ident|-?$Constant)\s*
+ $Compare\s*
+ (?:$Ident|-?$Constant)/x &&
+ $value =~ s/\([^\(\)]*\)/1/) {
}
if ($value =~ /^(?:$Ident|-?$Constant)$/) {
ERROR("trailing statements should be on next line\n" . $herecurr);
}
}
+# if should not continue a brace
+ if ($line =~ /}\s*if\b/) {
+ ERROR("trailing statements should be on next line\n" .
+ $herecurr);
+ }
# case and default should not have general statements after them
if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
$line !~ /\G(?:
WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
}
# check for struct file_operations, ensure they are const.
- if ($line =~ /\bstruct\s+file_operations\b/ &&
- $line !~ /\bconst\b/) {
- WARN("struct file_operations should normally be const\n" . $herecurr);
+ if ($line !~ /\bconst\b/ &&
+ $line =~ /\bstruct\s+(file_operations|seq_operations)\b/) {
+ WARN("struct $1 should normally be const\n" .
+ $herecurr);
}
# use of NR_CPUS is usually wrong
* - returns the new key's serial number
* - implements add_key()
*/
-asmlinkage long sys_add_key(const char __user *_type,
- const char __user *_description,
- const void __user *_payload,
- size_t plen,
- key_serial_t ringid)
+SYSCALL_DEFINE5(add_key, const char __user *, _type,
+ const char __user *, _description,
+ const void __user *, _payload,
+ size_t, plen,
+ key_serial_t, ringid)
{
key_ref_t keyring_ref, key_ref;
char type[32], *description;
* - if the _callout_info string is empty, it will be rendered as "-"
* - implements request_key()
*/
-asmlinkage long sys_request_key(const char __user *_type,
- const char __user *_description,
- const char __user *_callout_info,
- key_serial_t destringid)
+SYSCALL_DEFINE4(request_key, const char __user *, _type,
+ const char __user *, _description,
+ const char __user *, _callout_info,
+ key_serial_t, destringid)
{
struct key_type *ktype;
struct key *key;
/*
* the key control system call
*/
-asmlinkage long sys_keyctl(int option, unsigned long arg2, unsigned long arg3,
- unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3,
+ unsigned long, arg4, unsigned long, arg5)
{
switch (option) {
case KEYCTL_GET_KEYRING_ID:
* SPI 0 -> 1st PCM1796 (front)
* SPI 1 -> 2nd PCM1796 (surround)
* SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back)
+ * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
*
* GPIO 2 -> M0 of CS5381
* GPIO 3 -> M1 of CS5381
static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
u8 reg, u8 value)
{
+ /*
+ * We don't want to do writes on SPI 4 because the EEPROM, which shares
+ * the same pin, might get confused and broken. We'd better take care
+ * that the driver works with the default register values ...
+ */
+#if 0
/* maps ALSA channel pair number to SPI output */
static const u8 codec_map[4] = {
0, 1, 2, 4
(codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
(reg << 8) | value);
+#endif
}
static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
{
+ if (!strncmp(template->name, "Master Playback ", 16))
+ /* disable volume/mute because they would require SPI writes */
+ return 1;
if (!strncmp(template->name, "CD Capture ", 11))
/* CD in is actually connected to the video in pin */
template->private_value ^= AC97_CD ^ AC97_VIDEO;
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
.misc_flags = OXYGEN_MISC_MIDI,
- .function_flags = OXYGEN_FUNCTION_SPI |
- OXYGEN_FUNCTION_ENABLE_SPI_4_5,
- .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .function_flags = OXYGEN_FUNCTION_SPI,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
};
card->dma_start_bus_addr[SND_PS3_CH_R] =
runtime->dma_addr + (runtime->dma_bytes / 2);
- pr_debug("%s: vaddr=%p bus=%#lx\n", __func__,
+ pr_debug("%s: vaddr=%p bus=%#llx\n", __func__,
card->dma_start_vaddr[SND_PS3_CH_L],
card->dma_start_bus_addr[SND_PS3_CH_L]);
pr_info("%s: nullbuffer alloc failed\n", __func__);
goto clean_preallocate;
}
- pr_debug("%s: null vaddr=%p dma=%#lx\n", __func__,
+ pr_debug("%s: null vaddr=%p dma=%#llx\n", __func__,
the_card.null_buffer_start_vaddr,
the_card.null_buffer_start_dma_addr);
/* set default sample rate/word width */
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/hardware.h>
-
#include "atmel-pcm.h"
struct snd_soc_dapm_path *path;
int found = 0;
- if (widget->id != snd_soc_dapm_mux)
+ if (widget->id != snd_soc_dapm_mux &&
+ widget->id != snd_soc_dapm_value_mux)
return -ENODEV;
if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
.bInterfaceClass = USB_CLASS_AUDIO,
.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
},
+{
+ USB_DEVICE(0x046d, 0x0990),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Logitech, Inc.",
+ .product_name = "QuickCam Pro 9000",
+ .ifnum = QUIRK_NO_INTERFACE
+ }
+},
/*
* Yamaha devices
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff