* I2C-channel of the flexcop.
*/
int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t,
- flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
+ flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len);
/* from flexcop-sram.c */
int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target);
}
static int lgdt3303_pll_set(struct dvb_frontend* fe,
- struct dvb_frontend_parameters* params)
+ struct dvb_frontend_parameters* params)
{
struct flexcop_device *fc = fe->dvb->priv;
u8 buf[4];
return -EREMOTEIO;
}
- return 0;
+ return 0;
}
static struct lgdt330x_config air2pc_atsc_hd5000_config = {
dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {
- printk(KERN_WARNING "dvb-bt8xx: %s error "
- "(addr %02x <- %02x, err = %i)\n",
- __FUNCTION__, buf[0], buf[1], err);
+ printk(KERN_WARNING "dvb-bt8xx: %s error "
+ "(addr %02x <- %02x, err = %i)\n",
+ __FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
}
static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe,
- struct dvb_diseqc_master_cmd *m)
+ struct dvb_diseqc_master_cmd *m)
{
struct vp702x_fe_state *st = fe->demodulator_priv;
u8 cmd[8],ibuf[10];
struct vp7045_fe_state *state = fe->demodulator_priv;
*ber = (vp7045_read_reg(state->d, 0x0D) << 16) |
(vp7045_read_reg(state->d, 0x0E) << 8) |
- vp7045_read_reg(state->d, 0x0F);
+ vp7045_read_reg(state->d, 0x0F);
return 0;
}
static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *fesettings)
{
- fesettings->min_delay_ms = 50;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
+ fesettings->min_delay_ms = 50;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
return 0;
}
#define dbufout(b,l,m) {\
int i; \
for (i = 0; i < l; i++) \
- m("%02x ",b[i]); \
+ m("%02x ",b[i]); \
}
#define deb_info(args...) dprintk(0x01,args)
#define deb_i2c(args...) dprintk(0x02,args)
.type = FE_ATSC,
.frequency_min = 54000000,
.frequency_max = 803000000,
- /* stepsize is just a guess */
+ /* stepsize is just a guess */
.frequency_stepsize = 0,
.caps =
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 150;
- fesettings->step_size = 166667;
- fesettings->max_drift = 166667*2;
- return 0;
+ fesettings->min_delay_ms = 150;
+ fesettings->step_size = 166667;
+ fesettings->max_drift = 166667*2;
+ return 0;
}
static void cx22700_release(struct dvb_frontend* fe)
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = cx22700_release,
Conexant 22702 DVB OFDM demodulator driver
based on:
- Alps TDMB7 DVB OFDM demodulator driver
+ Alps TDMB7 DVB OFDM demodulator driver
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
Conexant 22702 DVB OFDM demodulator driver
based on:
- Alps TDMB7 DVB OFDM demodulator driver
+ Alps TDMB7 DVB OFDM demodulator driver
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
} while (0)
static struct {u8 reg; u8 data;} cx24110_regdata[]=
- /* Comments beginning with @ denote this value should
- be the default */
- {{0x09,0x01}, /* SoftResetAll */
- {0x09,0x00}, /* release reset */
- {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
- {0x02,0x17}, /* middle byte " */
- {0x03,0x29}, /* LSB " */
- {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
- {0x06,0xa5}, /* @ PLL 60MHz */
- {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
- {0x0a,0x00}, /* @ partial chip disables, do not set */
- {0x0b,0x01}, /* set output clock in gapped mode, start signal low
- active for first byte */
- {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
- {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
- {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
- to avoid starting the BER counter. Reset the
- CRC test bit. Finite counting selected */
- {0x15,0xff}, /* @ size of the limited time window for RS BER
- estimation. It is <value>*256 RS blocks, this
- gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
- {0x16,0x00}, /* @ enable all RS output ports */
- {0x17,0x04}, /* @ time window allowed for the RS to sync */
- {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
- for automatically */
- /* leave the current code rate and normalization
- registers as they are after reset... */
- {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
- only once */
- {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
- estimation. It is <value>*65536 channel bits, i.e.
- approx. 38ms at 27.5MS/s, rate 3/4 */
- {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
- /* leave front-end AGC parameters at default values */
- /* leave decimation AGC parameters at default values */
- {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
- {0x36,0xff}, /* clear all interrupt pending flags */
- {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
- {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
- /* leave the equalizer parameters on their default values */
- /* leave the final AGC parameters on their default values */
- {0x41,0x00}, /* @ MSB of front-end derotator frequency */
- {0x42,0x00}, /* @ middle bytes " */
- {0x43,0x00}, /* @ LSB " */
- /* leave the carrier tracking loop parameters on default */
- /* leave the bit timing loop parameters at gefault */
- {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
- /* the cx24108 data sheet for symbol rates above 15MS/s */
- {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
- {0x61,0x95}, /* GPIO pins 1-4 have special function */
- {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
- {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
- {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
- {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
- {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
- {0x73,0x00}, /* @ disable several demod bypasses */
- {0x74,0x00}, /* @ " */
- {0x75,0x00} /* @ " */
- /* the remaining registers are for SEC */
+ /* Comments beginning with @ denote this value should
+ be the default */
+ {{0x09,0x01}, /* SoftResetAll */
+ {0x09,0x00}, /* release reset */
+ {0x01,0xe8}, /* MSB of code rate 27.5MS/s */
+ {0x02,0x17}, /* middle byte " */
+ {0x03,0x29}, /* LSB " */
+ {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */
+ {0x06,0xa5}, /* @ PLL 60MHz */
+ {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */
+ {0x0a,0x00}, /* @ partial chip disables, do not set */
+ {0x0b,0x01}, /* set output clock in gapped mode, start signal low
+ active for first byte */
+ {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */
+ {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */
+ {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1
+ to avoid starting the BER counter. Reset the
+ CRC test bit. Finite counting selected */
+ {0x15,0xff}, /* @ size of the limited time window for RS BER
+ estimation. It is <value>*256 RS blocks, this
+ gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */
+ {0x16,0x00}, /* @ enable all RS output ports */
+ {0x17,0x04}, /* @ time window allowed for the RS to sync */
+ {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned
+ for automatically */
+ /* leave the current code rate and normalization
+ registers as they are after reset... */
+ {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting
+ only once */
+ {0x23,0x18}, /* @ size of the limited time window for Viterbi BER
+ estimation. It is <value>*65536 channel bits, i.e.
+ approx. 38ms at 27.5MS/s, rate 3/4 */
+ {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */
+ /* leave front-end AGC parameters at default values */
+ /* leave decimation AGC parameters at default values */
+ {0x35,0x40}, /* disable all interrupts. They are not connected anyway */
+ {0x36,0xff}, /* clear all interrupt pending flags */
+ {0x37,0x00}, /* @ fully enable AutoAcqq state machine */
+ {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */
+ /* leave the equalizer parameters on their default values */
+ /* leave the final AGC parameters on their default values */
+ {0x41,0x00}, /* @ MSB of front-end derotator frequency */
+ {0x42,0x00}, /* @ middle bytes " */
+ {0x43,0x00}, /* @ LSB " */
+ /* leave the carrier tracking loop parameters on default */
+ /* leave the bit timing loop parameters at gefault */
+ {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
+ /* the cx24108 data sheet for symbol rates above 15MS/s */
+ {0x57,0x00}, /* @ Filter sigma delta enabled, positive */
+ {0x61,0x95}, /* GPIO pins 1-4 have special function */
+ {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */
+ {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */
+ {0x64,0x20}, /* GPIO 6 is input, all others are outputs */
+ {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */
+ {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */
+ {0x73,0x00}, /* @ disable several demod bypasses */
+ {0x74,0x00}, /* @ " */
+ {0x75,0x00} /* @ " */
+ /* the remaining registers are for SEC */
};
static int cx24110_writereg (struct cx24110_state* state, int reg, int data)
{
- u8 buf [] = { reg, data };
+ u8 buf [] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
int err;
- if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
+ if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
dprintk ("%s: writereg error (err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
return -EREMOTEIO;
}
- return 0;
+ return 0;
}
static int cx24110_readreg (struct cx24110_state* state, u8 reg)
switch (inversion) {
case INVERSION_OFF:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
- /* AcqSpectrInvDis on. No idea why someone should want this */
- cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
- /* Initial value 0 at start of acq */
- cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
- /* current value 0 */
- /* The cx24110 manual tells us this reg is read-only.
- But what the heck... set it ayways */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7);
+ /* Initial value 0 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef);
+ /* current value 0 */
+ /* The cx24110 manual tells us this reg is read-only.
+ But what the heck... set it ayways */
+ break;
case INVERSION_ON:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
- /* AcqSpectrInvDis on. No idea why someone should want this */
- cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
- /* Initial value 1 at start of acq */
- cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
- /* current value 1 */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1);
+ /* AcqSpectrInvDis on. No idea why someone should want this */
+ cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08);
+ /* Initial value 1 at start of acq */
+ cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10);
+ /* current value 1 */
+ break;
case INVERSION_AUTO:
- cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
- /* AcqSpectrInvDis off. Leave initial & current states as is */
- break;
+ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe);
+ /* AcqSpectrInvDis off. Leave initial & current states as is */
+ break;
default:
return -EINVAL;
}
{
/* fixme (low): error handling */
- static const int rate[]={-1,1,2,3,5,7,-1};
- static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
- static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
+ static const int rate[]={-1,1,2,3,5,7,-1};
+ static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1};
+ static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1};
- /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
- searches all enabled viterbi rates, and can handle non-standard
- rates as well. */
+ /* Well, the AutoAcq engine of the cx24106 and 24110 automatically
+ searches all enabled viterbi rates, and can handle non-standard
+ rates as well. */
- if (fec>FEC_AUTO)
- fec=FEC_AUTO;
+ if (fec>FEC_AUTO)
+ fec=FEC_AUTO;
- if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
+ if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */
cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf);
/* clear AcqVitDis bit */
cx24110_writereg(state,0x18,0xae);
cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06);
/* set the puncture registers for code rate 3/4 */
return 0;
- } else {
+ } else {
cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20);
/* set AcqVitDis bit */
if(rate[fec]>0) {
cx24110_writereg(state,0x1a,g1[fec]);
cx24110_writereg(state,0x1b,g2[fec]);
/* not sure if this is the right way: I always used AutoAcq mode */
- } else
+ } else
return -EOPNOTSUPP;
/* fixme (low): which is the correct return code? */
- };
+ };
return 0;
}
static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate)
{
/* fixme (low): add error handling */
- u32 ratio;
- u32 tmp, fclk, BDRI;
+ u32 ratio;
+ u32 tmp, fclk, BDRI;
- static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
- int i;
+ static const u32 bands[]={5000000UL,15000000UL,90999000UL/2};
+ int i;
dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate);
- if (srate>90999000UL/2)
- srate=90999000UL/2;
- if (srate<500000)
- srate=500000;
+ if (srate>90999000UL/2)
+ srate=90999000UL/2;
+ if (srate<500000)
+ srate=500000;
- for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
+ for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++)
;
- /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
- and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
- R06[3:0] PLLphaseDetGain */
- tmp=cx24110_readreg(state,0x07)&0xfc;
- if(srate<90999000UL/4) { /* sample rate 45MHz*/
+ /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz,
+ and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult,
+ R06[3:0] PLLphaseDetGain */
+ tmp=cx24110_readreg(state,0x07)&0xfc;
+ if(srate<90999000UL/4) { /* sample rate 45MHz*/
cx24110_writereg(state,0x07,tmp);
cx24110_writereg(state,0x06,0x78);
fclk=90999000UL/2;
- } else if(srate<60666000UL/2) { /* sample rate 60MHz */
+ } else if(srate<60666000UL/2) { /* sample rate 60MHz */
cx24110_writereg(state,0x07,tmp|0x1);
cx24110_writereg(state,0x06,0xa5);
fclk=60666000UL;
- } else if(srate<80888000UL/2) { /* sample rate 80MHz */
+ } else if(srate<80888000UL/2) { /* sample rate 80MHz */
cx24110_writereg(state,0x07,tmp|0x2);
cx24110_writereg(state,0x06,0x87);
fclk=80888000UL;
- } else { /* sample rate 90MHz */
+ } else { /* sample rate 90MHz */
cx24110_writereg(state,0x07,tmp|0x3);
cx24110_writereg(state,0x06,0x78);
fclk=90999000UL;
- };
- dprintk("cx24110 debug: fclk %d Hz\n",fclk);
- /* we need to divide two integers with approx. 27 bits in 32 bit
- arithmetic giving a 25 bit result */
- /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
- also the most complex divisor. Hence, the dividend has,
- assuming 32bit unsigned arithmetic, 6 clear bits on top, the
- divisor 2 unused bits at the bottom. Also, the quotient is
- always less than 1/2. Borrowed from VES1893.c, of course */
+ };
+ dprintk("cx24110 debug: fclk %d Hz\n",fclk);
+ /* we need to divide two integers with approx. 27 bits in 32 bit
+ arithmetic giving a 25 bit result */
+ /* the maximum dividend is 90999000/2, 0x02b6446c, this number is
+ also the most complex divisor. Hence, the dividend has,
+ assuming 32bit unsigned arithmetic, 6 clear bits on top, the
+ divisor 2 unused bits at the bottom. Also, the quotient is
+ always less than 1/2. Borrowed from VES1893.c, of course */
- tmp=srate<<6;
- BDRI=fclk>>2;
- ratio=(tmp/BDRI);
+ tmp=srate<<6;
+ BDRI=fclk>>2;
+ ratio=(tmp/BDRI);
- tmp=(tmp%BDRI)<<8;
- ratio=(ratio<<8)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
- tmp=(tmp%BDRI)<<8;
- ratio=(ratio<<8)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<8;
+ ratio=(ratio<<8)+(tmp/BDRI);
- tmp=(tmp%BDRI)<<1;
- ratio=(ratio<<1)+(tmp/BDRI);
+ tmp=(tmp%BDRI)<<1;
+ ratio=(ratio<<1)+(tmp/BDRI);
- dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
- dprintk("fclk = %d\n", fclk);
- dprintk("ratio= %08x\n", ratio);
+ dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]);
+ dprintk("fclk = %d\n", fclk);
+ dprintk("ratio= %08x\n", ratio);
- cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
- cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
- cx24110_writereg(state, 0x3, (ratio)&0xff);
+ cx24110_writereg(state, 0x1, (ratio>>16)&0xff);
+ cx24110_writereg(state, 0x2, (ratio>>8)&0xff);
+ cx24110_writereg(state, 0x3, (ratio)&0xff);
- return 0;
+ return 0;
}
dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data);
- cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
- cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
+ cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */
+ cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */
- /* if the auto tuner writer is still busy, clear it out */
- while (cx24110_readreg(state,0x6d)&0x80)
+ /* if the auto tuner writer is still busy, clear it out */
+ while (cx24110_readreg(state,0x6d)&0x80)
cx24110_writereg(state,0x72,0);
- /* write the topmost 8 bits */
- cx24110_writereg(state,0x72,(data>>24)&0xff);
+ /* write the topmost 8 bits */
+ cx24110_writereg(state,0x72,(data>>24)&0xff);
- /* wait for the send to be completed */
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* wait for the send to be completed */
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* send another 8 bytes */
- cx24110_writereg(state,0x72,(data>>16)&0xff);
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* send another 8 bytes */
+ cx24110_writereg(state,0x72,(data>>16)&0xff);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* and the topmost 5 bits of this byte */
- cx24110_writereg(state,0x72,(data>>8)&0xff);
- while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
+ /* and the topmost 5 bits of this byte */
+ cx24110_writereg(state,0x72,(data>>8)&0xff);
+ while ((cx24110_readreg(state,0x6d)&0xc0)==0x80)
;
- /* now strobe the enable line once */
- cx24110_writereg(state,0x6d,0x32);
- cx24110_writereg(state,0x6d,0x30);
+ /* now strobe the enable line once */
+ cx24110_writereg(state,0x6d,0x32);
+ cx24110_writereg(state,0x6d,0x30);
- return 0;
+ return 0;
}
static int cx24110_initfe(struct dvb_frontend* fe)
{
struct cx24110_state *state = fe->demodulator_priv;
/* fixme (low): error handling */
- int i;
+ int i;
dprintk("%s: init chip\n", __FUNCTION__);
- for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
+ for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) {
cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data);
- };
+ };
if (state->config->pll_init) state->config->pll_init(fe);
driver for LSI L64781 COFDM demodulator
Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
- Marko Kohtala <marko.kohtala@luukku.com>
+ Marko Kohtala <marko.kohtala@luukku.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
{
struct l64781_state* state = fe->demodulator_priv;
- reset_and_configure (state);
+ reset_and_configure (state);
/* Power up */
l64781_writereg (state, 0x3e, 0xa5);
l64781_writereg (state, 0x0d, 0x8c);
/* With ppm=8000, it seems the DTR_SENSITIVITY will result in
- value of 2 with all possible bandwidths and guard
- intervals, which is the initial value anyway. */
- /*l64781_writereg (state, 0x19, 0x92);*/
+ value of 2 with all possible bandwidths and guard
+ intervals, which is the initial value anyway. */
+ /*l64781_writereg (state, 0x19, 0x92);*/
/* Everything is two's complement, soft bit and CSI_OUT too */
l64781_writereg (state, 0x1e, 0x09);
static int l64781_get_tune_settings(struct dvb_frontend* fe,
struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 4000;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
+ fesettings->min_delay_ms = 4000;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
}
static void l64781_release(struct dvb_frontend* fe)
/* The chip always responds to reads */
if (i2c_transfer(state->i2c, msg, 2) != 2) {
- dprintk("No response to read on I2C bus\n");
+ dprintk("No response to read on I2C bus\n");
goto error;
}
/* Reading the POWER_DOWN register always returns 0 */
if (reg0x3e != 0) {
- dprintk("Device doesn't look like L64781\n");
+ dprintk("Device doesn't look like L64781\n");
goto error;
}
/* Responds to all reads with 0 */
if (l64781_readreg(state, 0x1a) != 0) {
- dprintk("Read 1 returned unexpcted value\n");
+ dprintk("Read 1 returned unexpcted value\n");
goto error;
}
/* Responds with register default value */
if (l64781_readreg(state, 0x1a) != 0xa1) {
- dprintk("Read 2 returned unexpcted value\n");
+ dprintk("Read 2 returned unexpcted value\n");
goto error;
}
driver for LSI L64781 COFDM demodulator
Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH
- Marko Kohtala <marko.kohtala@luukku.com>
+ Marko Kohtala <marko.kohtala@luukku.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static u8 lgdt3303_8vsb_44_data[] = {
0x04, 0x00,
0x0d, 0x40,
- 0x0e, 0x87,
- 0x0f, 0x8e,
- 0x10, 0x01,
- 0x47, 0x8b };
+ 0x0e, 0x87,
+ 0x0f, 0x8e,
+ 0x10, 0x01,
+ 0x47, 0x8b };
/*
* Array of byte pairs <address, value>
if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
return ret;
- mt312_reset(state, 0);
+ mt312_reset(state, 0);
return 0;
}
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = mt312_release,
else
snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
- /* the value reported back from the frontend will be FFFF=32db 0000=0db */
+ /* the value reported back from the frontend will be FFFF=32db 0000=0db */
*snr = snrdb * (0xFFFF/32000);
memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
state->initialised = 0;
- /* Check the first 5 registers to ensure this a revision we can handle */
+ /* Check the first 5 registers to ensure this a revision we can handle */
i2c_readbytes(state, 0x00, buf, 5);
if (buf[0] != 0x04) goto error; /* device id */
.type = FE_ATSC,
.frequency_min = 54000000,
.frequency_max = 860000000,
- /* stepsize is just a guess */
+ /* stepsize is just a guess */
.frequency_stepsize = 166666,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
switch (state->demod_chip) {
case NXT2004:
if (i2c_writebytes(state, state->config->pll_address, data, 4))
- printk(KERN_WARNING "nxt200x: error writing to tuner\n");
+ printk(KERN_WARNING "nxt200x: error writing to tuner\n");
/* wait until we have a lock */
while (count < 20) {
i2c_readbytes(state, state->config->pll_address, &buf, 1);
/* calculate firmware CRC */
for (position = 0; position < fw->size; position++) {
- crc = nxt200x_crc(crc, fw->data[position]);
+ crc = nxt200x_crc(crc, fw->data[position]);
}
buf[0] = rambase >> 8;
.symbol_rate_max = 9360000, /* FIXME */
.symbol_rate_tolerance = 4000,
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
- FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
- FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
- FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
- FE_CAN_HIERARCHY_AUTO,
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO,
},
.release = nxt6000_release,
rcvr_stat = rec_buf[1];
usK = (rcvr_stat & 0x10) ? 3 : 0;
- /* The value reported back from the frontend will be FFFF=100% 0000=0% */
+ /* The value reported back from the frontend will be FFFF=100% 0000=0% */
signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
if (signal_strength > 0xffff)
*strength = 0xffff;
}
static void s5h1420_setfec_inversion(struct s5h1420_state* state,
- struct dvb_frontend_parameters *p)
+ struct dvb_frontend_parameters *p)
{
u8 inversion = 0;
case FEC_3_4:
s5h1420_writereg(state, 0x30, 0x04);
- s5h1420_writereg(state, 0x31, 0x12 | inversion);
- break;
+ s5h1420_writereg(state, 0x31, 0x12 | inversion);
+ break;
case FEC_5_6:
s5h1420_writereg(state, 0x30, 0x08);
};
extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
- struct i2c_adapter* i2c);
+ struct i2c_adapter* i2c);
#endif // S5H1420_H
static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
{
- u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
+ u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
int err;
- if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
return -EREMOTEIO;
}
- return 0;
+ return 0;
}
static int sp8870_readreg (struct sp8870_state* state, u16 reg)
static int sp8870_init (struct dvb_frontend* fe)
{
struct sp8870_state* state = fe->demodulator_priv;
- const struct firmware *fw = NULL;
+ const struct firmware *fw = NULL;
sp8870_wake_up(state);
if (state->initialised) return 0;
static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 350;
- fesettings->step_size = 0;
- fesettings->max_drift = 0;
- return 0;
+ fesettings->min_delay_ms = 350;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
}
static void sp8870_release(struct dvb_frontend* fe)
u8 b1 [2];
int ret;
struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
printk("%s: readreg error (ret == %i)\n", __FUNCTION__, ret);
static int sp887x_init(struct dvb_frontend* fe)
{
struct sp887x_state* state = fe->demodulator_priv;
- const struct firmware *fw = NULL;
+ const struct firmware *fw = NULL;
int ret;
if (!state->initialised) {
static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- fesettings->min_delay_ms = 350;
- fesettings->step_size = 166666*2;
- fesettings->max_drift = (166666*2)+1;
- return 0;
+ fesettings->min_delay_ms = 350;
+ fesettings->step_size = 166666*2;
+ fesettings->max_drift = (166666*2)+1;
+ return 0;
}
static void sp887x_release(struct dvb_frontend* fe)
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_RECOVER
+ FE_CAN_RECOVER
},
.release = sp887x_release,
int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
return stv0299_writeregI(state, reg, data);
}
static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u64 big = srate;
u32 ratio;
static int stv0299_send_diseqc_msg (struct dvb_frontend* fe,
struct dvb_diseqc_master_cmd *m)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
int i;
static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
dprintk ("%s\n", __FUNCTION__);
static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 val;
if (stv0299_wait_diseqc_idle (state, 100) < 0)
static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 reg0x08;
u8 reg0x0c;
static int stv0299_init (struct dvb_frontend* fe)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int i;
dprintk("stv0299: init chip\n");
static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
u8 signal = 0xff - stv0299_readreg (state, 0x18);
u8 sync = stv0299_readreg (state, 0x1b);
static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_BER) return 0;
*ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8)
| stv0299_readreg (state, 0x19));
static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8)
| stv0299_readreg (state, 0x25));
static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0;
else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e);
static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
int invval = 0;
dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__);
static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
s32 derot_freq;
int invval;
static int stv0299_sleep(struct dvb_frontend* fe)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
stv0299_writeregI(state, 0x02, 0x80);
state->initialised = 0;
static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
{
- struct stv0299_state* state = fe->demodulator_priv;
+ struct stv0299_state* state = fe->demodulator_priv;
fesettings->min_delay_ms = state->config->min_delay_ms;
if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) {
/* create dvb_frontend */
state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
+ state->frontend.demodulator_priv = state;
return &state->frontend;
error:
MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver");
MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, "
- "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
+ "Andreas Oberritter, Andrew de Quincey, Kenneth Aafløy");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(stv0299_writereg);
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
- Support for TDA10021
+ Support for TDA10021
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static int tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
{
- u8 buf[] = { reg, data };
+ u8 buf[] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
- int ret;
+ int ret;
ret = i2c_transfer (state->i2c, &msg, 1);
if (ret != 1)
u8 b0 [] = { reg };
u8 b1 [] = { 0 };
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
- { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
int ret;
ret = i2c_transfer (state->i2c, msg, 2);
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
- Support for TDA10021
+ Support for TDA10021
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
if (ret) {
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
- return ret;
+ return ret;
}
tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
u8 buf [] = { reg, data };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
- ret = i2c_transfer(state->i2c, &msg, 1);
+ ret = i2c_transfer(state->i2c, &msg, 1);
- if (ret != 1)
- dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
+ if (ret != 1)
+ dprintk ("%s: writereg error (reg %02x, ret == %i)\n",
__FUNCTION__, reg, ret);
- return (ret != 1) ? -1 : 0;
+ return (ret != 1) ? -1 : 0;
}
static int tda8083_readregs (struct tda8083_state* state, u8 reg1, u8 *b, u8 len)
dprintk ("%s: readreg error (reg %02x, ret == %i)\n",
__FUNCTION__, reg1, ret);
- return ret == 2 ? 0 : -1;
+ return ret == 2 ? 0 : -1;
}
static inline u8 tda8083_readreg (struct tda8083_state* state, u8 reg)
static int tda8083_set_symbolrate (struct tda8083_state* state, u32 srate)
{
- u32 ratio;
+ u32 ratio;
u32 tmp;
u8 filter;
if (srate > 32000000)
- srate = 32000000;
- if (srate < 500000)
- srate = 500000;
+ srate = 32000000;
+ if (srate < 500000)
+ srate = 500000;
filter = 0;
if (srate < 24000000)
unsigned long start = jiffies;
while (jiffies - start < timeout &&
- !(tda8083_readreg(state, 0x02) & 0x80))
+ !(tda8083_readreg(state, 0x02) & 0x80))
{
msleep(50);
};
dprintk(4, "%p\n",av7110);
- lock_kernel();
- daemonize("arm_mon");
- sigfillset(¤t->blocked);
- unlock_kernel();
+ lock_kernel();
+ daemonize("arm_mon");
+ sigfillset(¤t->blocked);
+ unlock_kernel();
av7110->arm_thread = current;
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&av7110->i2c_adap, &msg, 1) != 1)
static int philips_cd1516_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
- struct av7110* av7110 = fe->dvb->priv;
+ struct av7110* av7110 = fe->dvb->priv;
u32 div;
u32 f = params->frequency;
u8 data[4];
struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
- if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ if ((i2c_transfer(&av7110->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
pwm = 0x48;
return pwm;
}
// Try the grundig 29504-451
- av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
+ av7110->fe = tda8083_attach(&grundig_29504_451_config, &av7110->i2c_adap);
if (av7110->fe) {
av7110->fe->ops->diseqc_send_master_cmd = av7110_diseqc_send_master_cmd;
av7110->fe->ops->diseqc_send_burst = av7110_diseqc_send_burst;
case 0x0001: // Hauppauge/TT Nexus-T premium rev1.X
// ALPS TDLB7
- av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
+ av7110->fe = sp8870_attach(&alps_tdlb7_config, &av7110->i2c_adap);
break;
case 0x0002: // Hauppauge/TT DVB-C premium rev2.X
- av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
+ av7110->fe = ves1820_attach(&alps_tdbe2_config, &av7110->i2c_adap, read_pwm(av7110));
break;
case 0x0006: /* Fujitsu-Siemens DVB-S rev 1.6 */
dprintk(4, "dev: %p\n", dev);
- /* Set RPS_IRQ to 1 to track rps1 activity.
- * Enabling this won't send any interrupt to PC CPU.
- */
+ /* Set RPS_IRQ to 1 to track rps1 activity.
+ * Enabling this won't send any interrupt to PC CPU.
+ */
#define RPS_IRQ 0
if (budgetpatch == 1) {
int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap)
{
- switch (cap->cmd) {
- case OSD_CAP_MEMSIZE:
- if (FW_4M_SDRAM(av7110->arm_app))
- cap->val = 1000000;
- else
- cap->val = 92000;
- return 0;
- default:
- return -EINVAL;
- }
+ switch (cap->cmd) {
+ case OSD_CAP_MEMSIZE:
+ if (FW_4M_SDRAM(av7110->arm_app))
+ cap->val = 1000000;
+ else
+ cap->val = 92000;
+ return 0;
+ default:
+ return -EINVAL;
+ }
}
#endif /* CONFIG_DVB_AV7110_OSD */
static int stv0297_writereg(struct saa7146_dev *dev, u8 addr, u8 reg, u8 data)
{
- u8 buf [] = { reg, data };
- struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 2 };
if (1 != saa7146_i2c_transfer(dev, &msg, 1, 1))
return -1;
* Pitch: 188, NumBytes3: 188, NumLines3: 1024
*/
- switch(budget->card->type) {
+ switch(budget->card->type) {
case BUDGET_FS_ACTIVY:
saa7146_write(dev, DD1_INIT, 0x04000000);
saa7146_write(dev, MC2, (MASK_09 | MASK_25));
//MAKE_BUDGET_INFO(satel,"TT-Budget/Patch SATELCO PCI", BUDGET_TT_HW_DISEQC);
static struct pci_device_id pci_tbl[] = {
- MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
+ MAKE_EXTENSION_PCI(ttbp,0x13c2, 0x0000),
// MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
- {
- .vendor = 0,
- }
+ {
+ .vendor = 0,
+ }
};
/* those lines are for budget-patch to be tried
static int budget_av7110_send_fw_cmd(struct budget_patch *budget, u16* buf, int length)
{
- int i;
-
- dprintk(2, "budget: %p\n", budget);
-
- for (i = 2; i < length; i++)
- {
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
- msleep(5);
- }
- if (length)
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
- else
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
- msleep(5);
- ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
- msleep(5);
- return 0;
+ int i;
+
+ dprintk(2, "budget: %p\n", budget);
+
+ for (i = 2; i < length; i++)
+ {
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2*i, 2, (u32) buf[i], 0,0);
+ msleep(5);
+ }
+ if (length)
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, (u32) buf[1], 0,0);
+ else
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND + 2, 2, 0, 0,0);
+ msleep(5);
+ ttpci_budget_debiwrite(budget, DEBINOSWAP, COMMAND, 2, (u32) buf[0], 0,0);
+ msleep(5);
+ return 0;
}
static void av7110_set22k(struct budget_patch *budget, int state)
{
- u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
+ u16 buf[2] = {( COMTYPE_AUDIODAC << 8) | (state ? ON22K : OFF22K), 0};
- dprintk(2, "budget: %p\n", budget);
- budget_av7110_send_fw_cmd(budget, buf, 2);
+ dprintk(2, "budget: %p\n", budget);
+ budget_av7110_send_fw_cmd(budget, buf, 2);
}
static int av7110_send_diseqc_msg(struct budget_patch *budget, int len, u8 *msg, int burst)
{
- int i;
- u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
- 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ int i;
+ u16 buf[18] = { ((COMTYPE_AUDIODAC << 8) | SendDiSEqC),
+ 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- dprintk(2, "budget: %p\n", budget);
+ dprintk(2, "budget: %p\n", budget);
- if (len>10)
- len=10;
+ if (len>10)
+ len=10;
- buf[1] = len+2;
- buf[2] = len;
+ buf[1] = len+2;
+ buf[2] = len;
- if (burst != -1)
- buf[3]=burst ? 0x01 : 0x00;
- else
- buf[3]=0xffff;
+ if (burst != -1)
+ buf[3]=burst ? 0x01 : 0x00;
+ else
+ buf[3]=0xffff;
- for (i=0; i<len; i++)
- buf[i+4]=msg[i];
+ for (i=0; i<len; i++)
+ buf[i+4]=msg[i];
- budget_av7110_send_fw_cmd(budget, buf, 18);
- return 0;
+ budget_av7110_send_fw_cmd(budget, buf, 18);
+ return 0;
}
static int budget_patch_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
0x01, 0x15,
0x02, 0x00,
0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
0x06, 0x40, /* DAC not used, set to high impendance mode */
0x07, 0x00, /* DAC LSB */
{
switch(budget->dev->pci->subsystem_device) {
case 0x0000: // Hauppauge/TT WinTV DVB-S rev1.X
- case 0x1013: // SATELCO Multimedia PCI
+ case 0x1013: // SATELCO Multimedia PCI
// try the ALPS BSRV2 first of all
budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
/* written by Emard */
static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
{
- struct budget_patch *budget;
- int err;
+ struct budget_patch *budget;
+ int err;
int count = 0;
int detected = 0;
#define RPS_IRQ 0
#define HPS_SETUP 0
#if PATCH_RESET
- saa7146_write(dev, MC1, MASK_31);
- msleep(40);
+ saa7146_write(dev, MC1, MASK_31);
+ msleep(40);
#endif
#if HPS_SETUP
- // initialize registers. Better to have it like this
- // than leaving something unconfigured
+ // initialize registers. Better to have it like this
+ // than leaving something unconfigured
saa7146_write(dev, DD1_STREAM_B, 0);
// port B VSYNC at rising edge
saa7146_write(dev, DD1_INIT, 0x00000200); // have this in budget-core too!
// debi config
// saa7146_write(dev, DEBI_CONFIG, MASK_30|MASK_28|MASK_18);
- // zero all HPS registers
- saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
- saa7146_write(dev, HPS_H_SCALE, 0); // r6c
- saa7146_write(dev, BCS_CTRL, 0); // r70
- saa7146_write(dev, HPS_V_SCALE, 0); // r60
- saa7146_write(dev, HPS_V_GAIN, 0); // r64
- saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
- saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
- // Set HPS prescaler for port B input
- saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
- saa7146_write(dev, MC2,
- 0 * (MASK_08 | MASK_24) | // BRS control
- 0 * (MASK_09 | MASK_25) | // a
- 0 * (MASK_10 | MASK_26) | // b
- 1 * (MASK_06 | MASK_22) | // HPS_CTRL1
- 1 * (MASK_05 | MASK_21) | // HPS_CTRL2
- 0 * (MASK_01 | MASK_15) // DEBI
- );
+ // zero all HPS registers
+ saa7146_write(dev, HPS_H_PRESCALE, 0); // r68
+ saa7146_write(dev, HPS_H_SCALE, 0); // r6c
+ saa7146_write(dev, BCS_CTRL, 0); // r70
+ saa7146_write(dev, HPS_V_SCALE, 0); // r60
+ saa7146_write(dev, HPS_V_GAIN, 0); // r64
+ saa7146_write(dev, CHROMA_KEY_RANGE, 0); // r74
+ saa7146_write(dev, CLIP_FORMAT_CTRL, 0); // r78
+ // Set HPS prescaler for port B input
+ saa7146_write(dev, HPS_CTRL, (1<<30) | (0<<29) | (1<<28) | (0<<12) );
+ saa7146_write(dev, MC2,
+ 0 * (MASK_08 | MASK_24) | // BRS control
+ 0 * (MASK_09 | MASK_25) | // a
+ 0 * (MASK_10 | MASK_26) | // b
+ 1 * (MASK_06 | MASK_22) | // HPS_CTRL1
+ 1 * (MASK_05 | MASK_21) | // HPS_CTRL2
+ 0 * (MASK_01 | MASK_15) // DEBI
+ );
#endif
// Disable RPS1 and RPS0
- saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
- // RPS1 timeout disable
- saa7146_write(dev, RPS_TOV1, 0);
+ saa7146_write(dev, MC1, ( MASK_29 | MASK_28));
+ // RPS1 timeout disable
+ saa7146_write(dev, RPS_TOV1, 0);
// code for autodetection
// will wait for VBI_B event (vertical blank at port B)
WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
#endif
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
#if RPS_IRQ
- // issue RPS1 interrupt to increment counter
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
- // at least a NOP is neede between two interrupts
- WRITE_RPS1(cpu_to_le32(CMD_NOP));
- // interrupt again
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt to increment counter
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // at least a NOP is neede between two interrupts
+ WRITE_RPS1(cpu_to_le32(CMD_NOP));
+ // interrupt again
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- WRITE_RPS1(cpu_to_le32(CMD_STOP));
+ WRITE_RPS1(cpu_to_le32(CMD_STOP));
#if RPS_IRQ
- // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
- // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
- // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
- saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- // set event counter 1 treshold to maximum allowed value (rEC p55)
- saa7146_write(dev, ECT1R, 0x3fff );
+ // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53)
+ // use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
+ // use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
+ saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
+ // set event counter 1 treshold to maximum allowed value (rEC p55)
+ saa7146_write(dev, ECT1R, 0x3fff );
#endif
- // Fix VSYNC level
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
- // Set RPS1 Address register to point to RPS code (r108 p42)
- saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
- // Enable RPS1, (rFC p33)
- saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ // Enable RPS1, (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29 ));
- mdelay(50);
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+ mdelay(50);
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
mdelay(150);
detected = 1;
#if RPS_IRQ
- printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
+ printk("Event Counter 1 0x%04x\n", saa7146_read(dev, EC1R) & 0x3fff );
#endif
// Disable RPS1
- saa7146_write(dev, MC1, ( MASK_29 ));
+ saa7146_write(dev, MC1, ( MASK_29 ));
if(detected == 0)
- printk("budget-patch not detected or saa7146 in non-default state.\n"
- "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
+ printk("budget-patch not detected or saa7146 in non-default state.\n"
+ "try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
else
- printk("BUDGET-PATCH DETECTED.\n");
+ printk("BUDGET-PATCH DETECTED.\n");
/* OLD (Original design by Roberto Deza):
*/
// Setup RPS1 "program" (p35)
- count = 0;
+ count = 0;
- // Wait Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
- // Set GPIO3=1 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+ // Wait Source Line Counter Threshold (p36)
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+ // Set GPIO3=1 (p42)
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
#if RPS_IRQ
- // issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- // Wait reset Source Line Counter Threshold (p36)
- WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
- // Set GPIO3=0 (p42)
- WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
- WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
- WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+ // Wait reset Source Line Counter Threshold (p36)
+ WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+ // Set GPIO3=0 (p42)
+ WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
+ WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
+ WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
#if RPS_IRQ
- // issue RPS1 interrupt
- WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+ // issue RPS1 interrupt
+ WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
#endif
- // Jump to begin of RPS program (p37)
- WRITE_RPS1(cpu_to_le32(CMD_JUMP));
- WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
-
- // Fix VSYNC level
- saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
- // Set RPS1 Address register to point to RPS code (r108 p42)
- saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
- // Set Source Line Counter Threshold, using BRS (rCC p43)
- // It generates HS event every TS_HEIGHT lines
- // this is related to TS_WIDTH set in register
- // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
- // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
- //,then RPS_THRESH1
- // should be set to trigger every TS_HEIGHT (512) lines.
- //
- saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+ // Jump to begin of RPS program (p37)
+ WRITE_RPS1(cpu_to_le32(CMD_JUMP));
+ WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
- // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
- // Enable RPS1 (rFC p33)
- saa7146_write(dev, MC1, (MASK_13 | MASK_29));
-
-
- if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
- return -ENOMEM;
+ // Fix VSYNC level
+ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+ // Set RPS1 Address register to point to RPS code (r108 p42)
+ saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+ // Set Source Line Counter Threshold, using BRS (rCC p43)
+ // It generates HS event every TS_HEIGHT lines
+ // this is related to TS_WIDTH set in register
+ // NUM_LINE_BYTE3 in budget-core.c. If NUM_LINE_BYTE
+ // low 16 bits are set to TS_WIDTH bytes (TS_WIDTH=2*188
+ //,then RPS_THRESH1
+ // should be set to trigger every TS_HEIGHT (512) lines.
+ //
+ saa7146_write(dev, RPS_THRESH1, (TS_HEIGHT*1) | MASK_12 );
+
+ // saa7146_write(dev, RPS_THRESH0, ((TS_HEIGHT/2)<<16) |MASK_28| (TS_HEIGHT/2) |MASK_12 );
+ // Enable RPS1 (rFC p33)
+ saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+
+ if (!(budget = kmalloc (sizeof(struct budget_patch), GFP_KERNEL)))
+ return -ENOMEM;
- dprintk(2, "budget: %p\n", budget);
+ dprintk(2, "budget: %p\n", budget);
- if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
- kfree (budget);
- return err;
- }
+ if ((err = ttpci_budget_init (budget, dev, info, THIS_MODULE))) {
+ kfree (budget);
+ return err;
+ }
- dev->ext_priv = budget;
+ dev->ext_priv = budget;
budget->dvb_adapter.priv = budget;
frontend_init(budget);
- return 0;
+ return 0;
}
static int budget_patch_detach (struct saa7146_dev* dev)
{
- struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
- int err;
+ struct budget_patch *budget = (struct budget_patch*) dev->ext_priv;
+ int err;
if (budget->dvb_frontend) dvb_unregister_frontend(budget->dvb_frontend);
- err = ttpci_budget_deinit (budget);
+ err = ttpci_budget_deinit (budget);
- kfree (budget);
+ kfree (budget);
- return err;
+ return err;
}
static int __init budget_patch_init(void)
static void __exit budget_patch_exit(void)
{
- saa7146_unregister_extension(&budget_extension);
+ saa7146_unregister_extension(&budget_extension);
}
static struct saa7146_extension budget_extension = {
- .name = "budget_patch dvb\0",
- .flags = 0,
+ .name = "budget_patch dvb\0",
+ .flags = 0,
- .module = THIS_MODULE,
- .pci_tbl = pci_tbl,
- .attach = budget_patch_attach,
- .detach = budget_patch_detach,
+ .module = THIS_MODULE,
+ .pci_tbl = pci_tbl,
+ .attach = budget_patch_attach,
+ .detach = budget_patch_detach,
- .irq_mask = MASK_10,
- .irq_func = ttpci_budget_irq10_handler,
+ .irq_mask = MASK_10,
+ .irq_func = ttpci_budget_irq10_handler,
};
module_init(budget_patch_init);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
- "based so-called Budget Patch cards");
+ "based so-called Budget Patch cards");
buf[2] = ((div & 0x18000) >> 10) | 0x95;
buf[3] = (pwr << 6) | 0x30;
- // NOTE: since we're using a prescaler of 2, we set the
+ // NOTE: since we're using a prescaler of 2, we set the
// divisor frequency to 62.5kHz and divide by 125 above
if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
{ .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
- if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+ if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
pwm = 0x48;
return pwm;
budget->dvb_frontend = ves1x93_attach(&alps_bsrv2_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops->diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
- budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
+ budget->dvb_frontend->ops->diseqc_send_burst = budget_diseqc_send_burst;
budget->dvb_frontend->ops->set_tone = budget_set_tone;
break;
}
#endif
#define dprintk(level,args...) \
- do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
+ do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
struct budget_info {
char *name;
}
fprintf(fd_out, "\n};\n\n");
-
+
fclose(fd_in);
fclose(fd_out);
Holger Waechtler Convergence
Copyright (C) 2002-2003 Ralph Metzler <rjkm@metzlerbros.de>
- Metzler Brothers Systementwicklung GbR
+ Metzler Brothers Systementwicklung GbR
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static int check_mac_tt(u8 *buf)
{
- int i;
- u16 tmp = 0xffff;
-
- for (i = 0; i < 8; i++) {
- tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
- tmp ^= (tmp >> 4) & 0x0f;
- tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
- }
- tmp ^= 0xffff;
- return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
+ int i;
+ u16 tmp = 0xffff;
+
+ for (i = 0; i < 8; i++) {
+ tmp = (tmp << 8) | ((tmp >> 8) ^ buf[i]);
+ tmp ^= (tmp >> 4) & 0x0f;
+ tmp ^= (tmp << 12) ^ ((tmp & 0xff) << 5);
+ }
+ tmp ^= 0xffff;
+ return (((tmp >> 8) ^ buf[8]) | ((tmp & 0xff) ^ buf[9]));
}
static int getmac_tt(u8 * decodedMAC, u8 * encodedMAC)
{
- u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
+ u8 xor[20] = { 0x72, 0x23, 0x68, 0x19, 0x5c, 0xa8, 0x71, 0x2c,
0x54, 0xd3, 0x7b, 0xf1, 0x9E, 0x23, 0x16, 0xf6,
0x1d, 0x36, 0x64, 0x78};
- u8 data[20];
- int i;
+ u8 data[20];
+ int i;
/* In case there is a sig check failure have the orig contents available */
memcpy(data, encodedMAC, 20);
for (i = 0; i < 20; i++)
- data[i] ^= xor[i];
- for (i = 0; i < 10; i++)
- data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
+ data[i] ^= xor[i];
+ for (i = 0; i < 10; i++)
+ data[i] = ((data[2 * i + 1] << 8) | data[2 * i])
>> ((data[2 * i + 1] >> 6) & 3);
- if (check_mac_tt(data))
- return -ENODEV;
+ if (check_mac_tt(data))
+ return -ENODEV;
decodedMAC[0] = data[2]; decodedMAC[1] = data[1]; decodedMAC[2] = data[0];
decodedMAC[3] = data[6]; decodedMAC[4] = data[5]; decodedMAC[5] = data[4];
- return 0;
+ return 0;
}
static int ttpci_eeprom_read_encodedMAC(struct i2c_adapter *adapter, u8 * encodedMAC)
err = ttusb_result(ttusb, b, 0x20);
- /* check if the i2c transaction was successful */
- if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
+ /* check if the i2c transaction was successful */
+ if ((snd_len != b[5]) || (rcv_len != b[6])) return -EREMOTEIO;
if (rcv_len > 0) {
static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
- struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
- int ret;
- u8 data[1];
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
-
- switch(voltage) {
- case SEC_VOLTAGE_OFF:
- data[0] = 0x00;
- break;
- case SEC_VOLTAGE_13:
- data[0] = 0x44;
- break;
- case SEC_VOLTAGE_18:
- data[0] = 0x4c;
- break;
- default:
- return -EINVAL;
- };
-
- ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
- return (ret != 1) ? -EIO : 0;
+ struct ttusb* ttusb = (struct ttusb*) fe->dvb->priv;
+ int ret;
+ u8 data[1];
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ data[0] = 0x00;
+ break;
+ case SEC_VOLTAGE_13:
+ data[0] = 0x44;
+ break;
+ case SEC_VOLTAGE_18:
+ data[0] = 0x4c;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ ret = i2c_transfer(&ttusb->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
}
static int ttusb_update_lnb(struct ttusb *ttusb)
};
static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92,
- 0xff, 0xff
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
};
static u8 alps_bsru6_inittab[] = {
u32 div;
struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
- div = params->frequency / 125;
+ div = params->frequency / 125;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
udev = interface_to_usbdev(intf);
- if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
+ if (intf->altsetting->desc.bInterfaceNumber != 1) return -ENODEV;
if (!(ttusb = kmalloc(sizeof(struct ttusb), GFP_KERNEL)))
return -ENOMEM;
input_dev->keycode = rc_keys;
for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
- set_bit(rc_keys[i], input_dev->keybit);
+ set_bit(rc_keys[i], input_dev->keybit);
input_register_device(input_dev);
usb_free_urb(dec->irq_urb);
usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
- dec->irq_buffer, dec->irq_dma_handle);
+ dec->irq_buffer, dec->irq_dma_handle);
if (dec->rc_input_dev) {
input_unregister_device(dec->rc_input_dev);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff