drivers/char/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 3ae57ec..fa194a4 100644 (file)
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -584,7 +584,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_RE_FOG_START                     0x4298
 
 /* Not sure why there are duplicate of factor and constant values.
- * My best guess so far is that there are seperate zbiases for test and write.
+ * My best guess so far is that there are separate zbiases for test and write.
  * Ordering might be wrong.
  * Some of the tests indicate that fgl has a fallback implementation of zbias
  * via pixel shaders.

diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 75d6b74..7009dbd 100644 (file)
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -400,7 +400,7 @@ static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
 }
 
 /*
- * This function is used internally by ring buffer mangement code.
+ * This function is used internally by ring buffer management code.
  *
  * Returns virtual pointer to ring buffer.
  */

diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 004141d..49233f5 100644 (file)
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -18,7 +18,7 @@
  *
  * NOTES:
  *     - Locking is required for safe execution of EFI calls with regards
- *       to interrrupts and SMP.
+ *       to interrupts and SMP.
  *
  * TODO (December 1999):
  *     - provide the API to set/get the WakeUp Alarm (different from the

diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ffcecde..ffd747c 100644 (file)
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -1797,7 +1797,7 @@ static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
        res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
        /*
         * This gets a little confusing. The Digi cards have their own
-        * representation of c_cflags controling baud rate. For the most part
+        * representation of c_cflags controlling baud rate. For the most part
         * this is identical to the Linux implementation. However; Digi
         * supports one rate (76800) that Linux doesn't. This means that the
         * c_cflag entry that would normally mean 76800 for Digi actually means
@@ -2068,7 +2068,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file,
                {
                        /*
                         * This call is made by the apps to complete the
-                        * initilization of the board(s). This routine is
+                        * initialization of the board(s). This routine is
                         * responsible for setting the card to its initial
                         * state and setting the drivers control fields to the
                         * sutianle settings for the card in question.

diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index 0e8ceea..712d9f2 100644 (file)
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c
@@ -26,7 +26,7 @@
  * The hangcheck-timer driver uses the TSC to catch delays that
  * jiffies does not notice.  A timer is set.  When the timer fires, it
  * checks whether it was delayed and if that delay exceeds a given
- * margin of error.  The hangcheck_tick module paramter takes the timer
+ * margin of error.  The hangcheck_tick module parameter takes the timer
  * duration in seconds.  The hangcheck_margin parameter defines the
  * margin of error, in seconds.  The defaults are 60 seconds for the
  * timer and 180 seconds for the margin of error.  IOW, a timer is set

diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index fd75590..3402def 100644 (file)
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -838,7 +838,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
        if (!hvcsd)
                return -ENODEV;
 
-       /* By this time the vty-server won't be getting any more interrups */
+       /* By this time the vty-server won't be getting any more interrupts */
 
        spin_lock_irqsave(&hvcsd->lock, flags);
 

diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index e46120d..d6567b3 100644 (file)
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -661,7 +661,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
                if (!in_interrupt()) {
                        schedule_timeout_interruptible(1);      // short nap
                } else {
-                       // we cannot sched/sleep in interrrupt silly
+                       // we cannot sched/sleep in interrupt silly
                        return 0;   
                }
                if (signal_pending(current)) {

diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index e04e66c..0f49ccf 100644 (file)
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1251,7 +1251,7 @@ ip2_poll(unsigned long arg)
 
        // Just polled boards, IRQ = 0 will hit all non-interrupt boards.
        // It will NOT poll boards handled by hard interrupts.
-       // The issue of queued BH interrups is handled in ip2_interrupt().
+       // The issue of queued BH interrupts is handled in ip2_interrupt().
        ip2_polled_interrupt();
 
        PollTimer.expires = POLL_TIMEOUT;

diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 905d1f5..d010ed9 100644 (file)
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -1544,7 +1544,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
 
 /* mgsl_isr_misc()
  * 
- *     Service a miscellaneos interrupt source.
+ *     Service a miscellaneous interrupt source.
  *     
  * Arguments:          info            pointer to device extension (instance data)
  * Return Value:       None

diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 5422f99..ce5ebe3 100644 (file)
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -505,7 +505,7 @@ static int __init toshiba_init(void)
        if (tosh_probe())
                return -ENODEV;
 
-       printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n");
+       printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
 
        /* set the port to use for Fn status if not specified as a parameter */
        if (tosh_fn==0x00)