V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
authorIgor M. Liplianin <liplianin@me.by>
Sun, 5 Oct 2008 12:11:21 +0000 (09:11 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 13 Oct 2008 14:27:03 +0000 (12:27 -0200)
Add support for DvbWorld USB cards with STV0288 demodulator.
Those cards use Earda EDS-1547 tuner.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/dw2102.c
drivers/media/dvb/frontends/eds1547.h [new file with mode: 0644]

index 57bb470..3c13bcf 100644 (file)
@@ -253,6 +253,8 @@ config DVB_USB_DW2102
        depends on DVB_USB
        select DVB_PLL if !DVB_FE_CUSTOMISE
        select DVB_STV0299 if !DVB_FE_CUSTOMISE
+       select DVB_STV0288 if !DVB_FE_CUSTOMISE
+       select DVB_STB6000 if !DVB_FE_CUSTOMISE
        select DVB_CX24116 if !DVB_FE_CUSTOMISE
        select DVB_SI21XX if !DVB_FE_CUSTOMISE
        help
index 20ba3f1..ca53df6 100644 (file)
@@ -14,6 +14,9 @@
 #include "si21xx.h"
 #include "stv0299.h"
 #include "z0194a.h"
+#include "stv0288.h"
+#include "stb6000.h"
+#include "eds1547.h"
 #include "cx24116.h"
 
 #ifndef USB_PID_DW2102
@@ -199,6 +202,78 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap,
        mutex_unlock(&d->i2c_mutex);
        return num;
 }
+static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
+{
+       struct dvb_usb_device *d = i2c_get_adapdata(adap);
+       int ret = 0;
+
+       if (!d)
+               return -ENODEV;
+       if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+               return -EAGAIN;
+
+       switch (num) {
+       case 2: {
+               /* read */
+               /* first write first register number */
+               u8 ibuf [msg[1].len + 2], obuf[3];
+               obuf[0] = 0xd0;
+               obuf[1] = msg[0].len;
+               obuf[2] = msg[0].buf[0];
+               ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+                               obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+               /* second read registers */
+               ret = dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0,
+                               ibuf, msg[1].len + 2, DW210X_READ_MSG);
+               memcpy(msg[1].buf, ibuf + 2, msg[1].len);
+
+               break;
+       }
+       case 1:
+               switch (msg[0].addr) {
+               case 0x68: {
+                       /* write to register */
+                       u8 obuf[msg[0].len + 2];
+                       obuf[0] = 0xd0;
+                       obuf[1] = msg[0].len;
+                       memcpy(obuf + 2, msg[0].buf, msg[0].len);
+                       ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+                                       obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+                       break;
+               }
+               case 0x61: {
+                       /* write to tuner */
+                       u8 obuf[msg[0].len + 2];
+                       obuf[0] = 0xc2;
+                       obuf[1] = msg[0].len;
+                       memcpy(obuf + 2, msg[0].buf, msg[0].len);
+                       ret = dw210x_op_rw(d->udev, 0xc2, 0, 0,
+                                       obuf, msg[0].len + 2, DW210X_WRITE_MSG);
+                       break;
+               }
+               case(DW2102_RC_QUERY): {
+                       u8 ibuf[2];
+                       ret  = dw210x_op_rw(d->udev, 0xb8, 0, 0,
+                                       ibuf, 2, DW210X_READ_MSG);
+                       memcpy(msg[0].buf, ibuf , 2);
+                       break;
+               }
+               case(DW2102_VOLTAGE_CTRL): {
+                       u8 obuf[2];
+                       obuf[0] = 0x30;
+                       obuf[1] = msg[0].buf[0];
+                       ret = dw210x_op_rw(d->udev, 0xb2, 0, 0,
+                                       obuf, 2, DW210X_WRITE_MSG);
+                       break;
+               }
+               }
+
+               break;
+       }
+
+       mutex_unlock(&d->i2c_mutex);
+       return num;
+}
 
 static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 {
@@ -297,6 +372,11 @@ static struct i2c_algorithm dw2102_serit_i2c_algo = {
        .functionality = dw210x_i2c_func,
 };
 
+static struct i2c_algorithm dw2102_earda_i2c_algo = {
+       .master_xfer = dw2102_earda_i2c_transfer,
+       .functionality = dw210x_i2c_func,
+};
+
 static struct i2c_algorithm dw2104_i2c_algo = {
        .master_xfer = dw2104_i2c_transfer,
        .functionality = dw210x_i2c_func,
@@ -378,6 +458,17 @@ static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
                        return 0;
                }
        }
+       if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) {
+               /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
+               d->fe = dvb_attach(stv0288_attach, &earda_config,
+                                       &d->dev->i2c_adap);
+               if (d->fe != NULL) {
+                       d->fe->ops.set_voltage = dw210x_set_voltage;
+                       info("Attached stv0288!\n");
+                       return 0;
+               }
+       }
+
        if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) {
                /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/
                d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
@@ -398,6 +489,14 @@ static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
        return 0;
 }
 
+static int dw2102_earda_tuner_attach(struct dvb_usb_adapter *adap)
+{
+       dvb_attach(stb6000_attach, adap->fe, 0x61,
+               &adap->dev->i2c_adap);
+
+       return 0;
+}
+
 static struct dvb_usb_rc_key dw210x_rc_keys[] = {
        { 0xf8, 0x0a, KEY_Q },          /*power*/
        { 0xf8, 0x0c, KEY_M },          /*mute*/
@@ -478,7 +577,7 @@ static int dw2102_load_firmware(struct usb_device *dev,
        u8 *b, *p;
        int ret = 0, i;
        u8 reset;
-       u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
+       u8 reset16[] = {0, 0, 0, 0, 0, 0, 0};
        const struct firmware *fw;
        const char *filename = "dvb-usb-dw2101.fw";
        switch (dev->descriptor.idProduct) {
@@ -544,9 +643,25 @@ static int dw2102_load_firmware(struct usb_device *dev,
                        /* check STV0299 frontend  */
                        dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2,
                                        DW210X_READ_MSG);
-                       if (reset16[0] == 0xa1)
+                       if (reset16[0] == 0xa1) {
                                dw2102_properties.i2c_algo = &dw2102_i2c_algo;
-                       break;
+                               dw2102_properties.adapter->tuner_attach = &dw2102_tuner_attach;
+                               break;
+                       } else {
+                               /* check STV0288 frontend  */
+                               reset16[0] = 0xd0;
+                               reset16[1] = 1;
+                               reset16[2] = 0;
+                               dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3,
+                                               DW210X_WRITE_MSG);
+                               dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3,
+                                               DW210X_READ_MSG);
+                               if (reset16[2] == 0x11) {
+                                       dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo;
+                                       dw2102_properties.adapter->tuner_attach = &dw2102_earda_tuner_attach;
+                                       break;
+                               }
+                       }
                case 0x2101:
                        dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2,
                                        DW210X_READ_MSG);
@@ -586,7 +701,7 @@ static struct dvb_usb_device_properties dw2102_properties = {
                {
                        .frontend_attach = dw2102_frontend_attach,
                        .streaming_ctrl = NULL,
-                       .tuner_attach = dw2102_tuner_attach,
+                       .tuner_attach = NULL,
                        .stream = {
                                .type = USB_BULK,
                                .count = 8,
diff --git a/drivers/media/dvb/frontends/eds1547.h b/drivers/media/dvb/frontends/eds1547.h
new file mode 100644 (file)
index 0000000..fa79b7c
--- /dev/null
@@ -0,0 +1,133 @@
+/* eds1547.h Earda EDS-1547 tuner support
+*
+* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
+*
+*      This program is free software; you can redistribute it and/or modify it
+*      under the terms of the GNU General Public License as published by the
+*      Free Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#ifndef EDS1547
+#define EDS1547
+
+static u8 stv0288_earda_inittab[] = {
+       0x01, 0x57,
+       0x02, 0x20,
+       0x03, 0x8e,
+       0x04, 0x8e,
+       0x05, 0x12,
+       0x06, 0x00,
+       0x07, 0x00,
+       0x09, 0x00,
+       0x0a, 0x04,
+       0x0b, 0x00,
+       0x0c, 0x00,
+       0x0d, 0x00,
+       0x0e, 0xd4,
+       0x0f, 0x30,
+       0x11, 0x44,
+       0x12, 0x03,
+       0x13, 0x48,
+       0x14, 0x84,
+       0x15, 0x45,
+       0x16, 0xb7,
+       0x17, 0x9c,
+       0x18, 0x00,
+       0x19, 0xa6,
+       0x1a, 0x88,
+       0x1b, 0x8f,
+       0x1c, 0xf0,
+       0x20, 0x0b,
+       0x21, 0x54,
+       0x22, 0x00,
+       0x23, 0x00,
+       0x2b, 0xff,
+       0x2c, 0xf7,
+       0x30, 0x00,
+       0x31, 0x1e,
+       0x32, 0x14,
+       0x33, 0x0f,
+       0x34, 0x09,
+       0x35, 0x0c,
+       0x36, 0x05,
+       0x37, 0x2f,
+       0x38, 0x16,
+       0x39, 0xbd,
+       0x3a, 0x00,
+       0x3b, 0x13,
+       0x3c, 0x11,
+       0x3d, 0x30,
+       0x40, 0x63,
+       0x41, 0x04,
+       0x42, 0x60,
+       0x43, 0x00,
+       0x44, 0x00,
+       0x45, 0x00,
+       0x46, 0x00,
+       0x47, 0x00,
+       0x4a, 0x00,
+       0x50, 0x10,
+       0x51, 0x36,
+       0x52, 0x09,
+       0x53, 0x94,
+       0x54, 0x62,
+       0x55, 0x29,
+       0x56, 0x64,
+       0x57, 0x2b,
+       0x58, 0x54,
+       0x59, 0x86,
+       0x5a, 0x00,
+       0x5b, 0x9b,
+       0x5c, 0x08,
+       0x5d, 0x7f,
+       0x5e, 0x00,
+       0x5f, 0xff,
+       0x70, 0x00,
+       0x71, 0x00,
+       0x72, 0x00,
+       0x74, 0x00,
+       0x75, 0x00,
+       0x76, 0x00,
+       0x81, 0x00,
+       0x82, 0x3f,
+       0x83, 0x3f,
+       0x84, 0x00,
+       0x85, 0x00,
+       0x88, 0x00,
+       0x89, 0x00,
+       0x8a, 0x00,
+       0x8b, 0x00,
+       0x8c, 0x00,
+       0x90, 0x00,
+       0x91, 0x00,
+       0x92, 0x00,
+       0x93, 0x00,
+       0x94, 0x1c,
+       0x97, 0x00,
+       0xa0, 0x48,
+       0xa1, 0x00,
+       0xb0, 0xb8,
+       0xb1, 0x3a,
+       0xb2, 0x10,
+       0xb3, 0x82,
+       0xb4, 0x80,
+       0xb5, 0x82,
+       0xb6, 0x82,
+       0xb7, 0x82,
+       0xb8, 0x20,
+       0xb9, 0x00,
+       0xf0, 0x00,
+       0xf1, 0x00,
+       0xf2, 0xc0,
+       0xff,0xff,
+};
+
+static struct stv0288_config earda_config = {
+       .demod_address = 0x68,
+       .min_delay_ms = 100,
+       .inittab = stv0288_earda_inittab,
+};
+
+#endif