[ARM] 5283/1: pxa: add CM-X255 pcmcia support

Signed-off-by: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 269a9e9..749dff2 100644 (file)
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -71,6 +71,6 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)             += sa1100_simpad.o
 pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)               += pxa2xx_lubbock.o sa1111_generic.o
 pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)             += pxa2xx_mainstone.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)                        += pxa2xx_sharpsl.o
-pxa2xx_cs-$(CONFIG_MACH_ARMCORE)               += pxa2xx_cm_x270.o
+pxa2xx_cs-$(CONFIG_MACH_ARMCORE)               += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
 pxa2xx_cs-$(CONFIG_MACH_PALMTX)                += pxa2xx_palmtx.o
 

diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
new file mode 100644 (file)
index 0000000..7c8bcb4
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -0,0 +1,154 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x255.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+
+#include "soc_common.h"
+
+#define GPIO_PCMCIA_SKTSEL     (54)
+#define GPIO_PCMCIA_S0_CD_VALID        (16)
+#define GPIO_PCMCIA_S1_CD_VALID        (17)
+#define GPIO_PCMCIA_S0_RDYINT  (6)
+#define GPIO_PCMCIA_S1_RDYINT  (8)
+#define GPIO_PCMCIA_RESET      (9)
+
+#define PCMCIA_S0_CD_VALID     IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID     IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT       IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT       IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+
+
+static struct pcmcia_irqs irqs[] = {
+       { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+       { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+};
+
+static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+       int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
+       if (ret)
+               return ret;
+       gpio_direction_output(GPIO_PCMCIA_RESET, 0);
+
+       skt->irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+       ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+       if (!ret)
+               gpio_free(GPIO_PCMCIA_RESET);
+
+       return ret;
+}
+
+static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
+{
+       soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+       gpio_free(GPIO_PCMCIA_RESET);
+}
+
+
+static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+                                      struct pcmcia_state *state)
+{
+       int cd = skt->nr ? GPIO_PCMCIA_S1_CD_VALID : GPIO_PCMCIA_S0_CD_VALID;
+       int rdy = skt->nr ? GPIO_PCMCIA_S0_RDYINT : GPIO_PCMCIA_S1_RDYINT;
+
+       state->detect = !gpio_get_value(cd);
+       state->ready  = !!gpio_get_value(rdy);
+       state->bvd1   = 1;
+       state->bvd2   = 1;
+       state->vs_3v  = 0;
+       state->vs_Xv  = 0;
+       state->wrprot = 0;  /* not available */
+}
+
+
+static int cmx255_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+                                         const socket_state_t *state)
+{
+       switch (skt->nr) {
+       case 0:
+               if (state->flags & SS_RESET) {
+                       gpio_set_value(GPIO_PCMCIA_SKTSEL, 0);
+                       udelay(1);
+                       gpio_set_value(GPIO_PCMCIA_RESET, 1);
+                       udelay(10);
+                       gpio_set_value(GPIO_PCMCIA_RESET, 0);
+               }
+               break;
+       case 1:
+               if (state->flags & SS_RESET) {
+                       gpio_set_value(GPIO_PCMCIA_SKTSEL, 1);
+                       udelay(1);
+                       gpio_set_value(GPIO_PCMCIA_RESET, 1);
+                       udelay(10);
+                       gpio_set_value(GPIO_PCMCIA_RESET, 0);
+               }
+               break;
+       }
+
+       return 0;
+}
+
+static void cmx255_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void cmx255_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+
+static struct pcmcia_low_level cmx255_pcmcia_ops __initdata = {
+       .owner                  = THIS_MODULE,
+       .hw_init                = cmx255_pcmcia_hw_init,
+       .hw_shutdown            = cmx255_pcmcia_shutdown,
+       .socket_state           = cmx255_pcmcia_socket_state,
+       .configure_socket       = cmx255_pcmcia_configure_socket,
+       .socket_init            = cmx255_pcmcia_socket_init,
+       .socket_suspend         = cmx255_pcmcia_socket_suspend,
+       .nr                     = 1,
+};
+
+static struct platform_device *cmx255_pcmcia_device;
+
+int __init cmx255_pcmcia_init(void)
+{
+       int ret;
+
+       cmx255_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
+       if (!cmx255_pcmcia_device)
+               return -ENOMEM;
+
+       ret = platform_device_add_data(cmx255_pcmcia_device, &cmx255_pcmcia_ops,
+                                      sizeof(cmx255_pcmcia_ops));
+
+       if (ret == 0) {
+               printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n");
+               ret = platform_device_add(cmx255_pcmcia_device);
+       }
+
+       if (ret)
+               platform_device_put(cmx255_pcmcia_device);
+
+       return ret;
+}
+
+void __exit cmx255_pcmcia_exit(void)
+{
+       platform_device_unregister(cmx255_pcmcia_device);
+}

diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bcff5cf..6c3aac3 100644 (file)
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -105,13 +105,10 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
 
 static struct platform_device *cmx270_pcmcia_device;
 
-static int __init cmx270_pcmcia_init(void)
+int __init cmx270_pcmcia_init(void)
 {
        int ret;
 
-       if (!machine_is_armcore())
-               return -ENODEV;
-
        cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 
        if (!cmx270_pcmcia_device)
@@ -131,14 +128,7 @@ static int __init cmx270_pcmcia_init(void)
        return ret;
 }
 
-static void __exit cmx270_pcmcia_exit(void)
+void __exit cmx270_pcmcia_exit(void)
 {
        platform_device_unregister(cmx270_pcmcia_device);
 }
-
-module_init(cmx270_pcmcia_init);
-module_exit(cmx270_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
-MODULE_DESCRIPTION("CM-x270 PCMCIA driver");

diff --git a/drivers/pcmcia/pxa2xx_cm_x2xx.c b/drivers/pcmcia/pxa2xx_cm_x2xx.c
new file mode 100644 (file)
index 0000000..4f09506
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x2xx.c
@@ -0,0 +1,49 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/system.h>
+
+int cmx255_pcmcia_init(void);
+int cmx270_pcmcia_init(void);
+void cmx255_pcmcia_exit(void);
+void cmx270_pcmcia_exit(void);
+
+static int __init cmx2xx_pcmcia_init(void)
+{
+       int ret = -ENODEV;
+
+       if (machine_is_armcore() && cpu_is_pxa25x())
+               ret = cmx255_pcmcia_init();
+       else if (machine_is_armcore() && cpu_is_pxa27x())
+               ret = cmx270_pcmcia_init();
+
+       return ret;
+}
+
+static void __exit cmx2xx_pcmcia_exit(void)
+{
+       if (machine_is_armcore() && cpu_is_pxa25x())
+               cmx255_pcmcia_exit();
+       else if (machine_is_armcore() && cpu_is_pxa27x())
+               cmx270_pcmcia_exit();
+}
+
+module_init(cmx2xx_pcmcia_init);
+module_exit(cmx2xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x2xx PCMCIA driver");