#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/ctype.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_PCI
#include <linux/pci.h>
-#endif
/*****************************************************************************/
#define BRD_ECH64PCI 27
#define BRD_EASYIOPCI 28
-/*
- * Define a configuration structure to hold the board configuration.
- * Need to set this up in the code (for now) with the boards that are
- * to be configured into the system. This is what needs to be modified
- * when adding/removing/modifying boards. Each line entry in the
- * stl_brdconf[] array is a board. Each line contains io/irq/memory
- * ranges for that board (as well as what type of board it is).
- * Some examples:
- * { BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },
- * This line would configure an EasyIO board (4 or 8, no difference),
- * at io address 2a0 and irq 10.
- * Another example:
- * { BRD_ECH, 0x2a8, 0x280, 0, 12, 0 },
- * This line will configure an EasyConnection 8/32 board at primary io
- * address 2a8, secondary io address 280 and irq 12.
- * Enter as many lines into this array as you want (only the first 4
- * will actually be used!). Any combination of EasyIO and EasyConnection
- * boards can be specified. EasyConnection 8/32 boards can share their
- * secondary io addresses between each other.
- *
- * NOTE: there is no need to put any entries in this table for PCI
- * boards. They will be found automatically by the driver - provided
- * PCI BIOS32 support is compiled into the kernel.
- */
-
-static struct stlconf {
+struct stlconf {
int brdtype;
int ioaddr1;
int ioaddr2;
unsigned long memaddr;
int irq;
int irqtype;
-} stl_brdconf[] = {
- /*{ BRD_EASYIO, 0x2a0, 0, 0, 10, 0 },*/
};
-static int stl_nrbrds = ARRAY_SIZE(stl_brdconf);
+static unsigned int stl_nrbrds;
/*****************************************************************************/
9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
};
-/*
- * Define some handy local macros...
- */
-#undef MIN
-#define MIN(a,b) (((a) <= (b)) ? (a) : (b))
-
-#undef TOLOWER
-#define TOLOWER(x) ((((x) >= 'A') && ((x) <= 'Z')) ? ((x) + 0x20) : (x))
-
/*****************************************************************************/
/*
/*****************************************************************************/
/*
- * Convert an ascii string number into an unsigned long.
- */
-
-static unsigned long stl_atol(char *str)
-{
- unsigned long val;
- int base, c;
- char *sp;
-
- val = 0;
- sp = str;
- if ((*sp == '0') && (*(sp+1) == 'x')) {
- base = 16;
- sp += 2;
- } else if (*sp == '0') {
- base = 8;
- sp++;
- } else {
- base = 10;
- }
-
- for (; (*sp != 0); sp++) {
- c = (*sp > '9') ? (TOLOWER(*sp) - 'a' + 10) : (*sp - '0');
- if ((c < 0) || (c >= base)) {
- printk("STALLION: invalid argument %s\n", str);
- val = 0;
- break;
- }
- val = (val * base) + c;
- }
- return val;
-}
-
-/*****************************************************************************/
-
-/*
* Parse the supplied argument string, into the board conf struct.
*/
return 0;
for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
- *sp = TOLOWER(*sp);
+ *sp = tolower(*sp);
for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++) {
if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
i = 1;
if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->ioaddr1 = stl_atol(argp[i]);
+ confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0);
i++;
if (confp->brdtype == BRD_ECH) {
if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->ioaddr2 = stl_atol(argp[i]);
+ confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0);
i++;
}
if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->irq = stl_atol(argp[i]);
+ confp->irq = simple_strtoul(argp[i], NULL, 0);
return 1;
}
return brdp;
}
-static void __init stl_argbrds(void)
-{
- struct stlconf conf;
- struct stlbrd *brdp;
- int i;
-
- pr_debug("stl_argbrds()\n");
-
- for (i = stl_nrbrds; (i < stl_nargs); i++) {
- memset(&conf, 0, sizeof(conf));
- if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
- continue;
- if ((brdp = stl_allocbrd()) == NULL)
- continue;
- stl_nrbrds = i + 1;
- brdp->brdnr = i;
- brdp->brdtype = conf.brdtype;
- brdp->ioaddr1 = conf.ioaddr1;
- brdp->ioaddr2 = conf.ioaddr2;
- brdp->irq = conf.irq;
- brdp->irqtype = conf.irqtype;
- if (stl_brdinit(brdp))
- kfree(brdp);
- }
-}
-
/*****************************************************************************/
static int stl_open(struct tty_struct *tty, struct file *filp)
stlen = len;
}
- len = MIN(len, count);
+ len = min(len, (unsigned int)count);
count = 0;
while (len > 0) {
- stlen = MIN(len, stlen);
+ stlen = min(len, stlen);
memcpy(head, chbuf, stlen);
len -= stlen;
chbuf += stlen;
/*****************************************************************************/
/*
- * Scan through all the boards in the configuration and see what we
- * can find. Handle EIO and the ECH boards a little differently here
- * since the initial search and setup is too different.
- */
-
-static int __init stl_initbrds(void)
-{
- struct stlbrd *brdp;
- struct stlconf *confp;
- int i;
-
- pr_debug("stl_initbrds()\n");
-
- if (stl_nrbrds > STL_MAXBRDS) {
- printk("STALLION: too many boards in configuration table, "
- "truncating to %d\n", STL_MAXBRDS);
- stl_nrbrds = STL_MAXBRDS;
- }
-
-/*
- * Firstly scan the list of static boards configured. Allocate
- * resources and initialize the boards as found.
- */
- for (i = 0; (i < stl_nrbrds); i++) {
- confp = &stl_brdconf[i];
- stl_parsebrd(confp, stl_brdsp[i]);
- if ((brdp = stl_allocbrd()) == NULL)
- return(-ENOMEM);
- brdp->brdnr = i;
- brdp->brdtype = confp->brdtype;
- brdp->ioaddr1 = confp->ioaddr1;
- brdp->ioaddr2 = confp->ioaddr2;
- brdp->irq = confp->irq;
- brdp->irqtype = confp->irqtype;
- if (stl_brdinit(brdp))
- kfree(brdp);
- }
-
-/*
- * Find any dynamically supported boards. That is via module load
- * line options or auto-detected on the PCI bus.
- */
- stl_argbrds();
-
- return(0);
-}
-
-/*****************************************************************************/
-
-/*
* Return the board stats structure to user app.
*/
}
outb(srer, (ioaddr + EREG_DATA));
} else {
- len = MIN(len, CD1400_TXFIFOSIZE);
+ len = min(len, CD1400_TXFIFOSIZE);
portp->stats.txtotal += len;
- stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
outb((TDR + portp->uartaddr), ioaddr);
outsb((ioaddr + EREG_DATA), tail, stlen);
len -= stlen;
outb((RDCR + portp->uartaddr), ioaddr);
len = inb(ioaddr + EREG_DATA);
if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = MIN(len, sizeof(stl_unwanted));
+ len = min(len, sizeof(stl_unwanted));
outb((RDSR + portp->uartaddr), ioaddr);
insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
portp->stats.rxlost += len;
portp->stats.rxtotal += len;
} else {
- len = MIN(len, buflen);
+ len = min(len, buflen);
if (len > 0) {
unsigned char *ptr;
outb((RDSR + portp->uartaddr), ioaddr);
outb(mr0, (ioaddr + XP_DATA));
}
} else {
- len = MIN(len, SC26198_TXFIFOSIZE);
+ len = min(len, SC26198_TXFIFOSIZE);
portp->stats.txtotal += len;
- stlen = MIN(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
+ stlen = min(len, ((portp->tx.buf + STL_TXBUFSIZE) - tail));
outb(GTXFIFO, (ioaddr + XP_ADDR));
outsb((ioaddr + XP_DATA), tail, stlen);
len -= stlen;
if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = MIN(len, sizeof(stl_unwanted));
+ len = min(len, sizeof(stl_unwanted));
outb(GRXFIFO, (ioaddr + XP_ADDR));
insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
portp->stats.rxlost += len;
portp->stats.rxtotal += len;
} else {
- len = MIN(len, buflen);
+ len = min(len, buflen);
if (len > 0) {
unsigned char *ptr;
outb(GRXFIFO, (ioaddr + XP_ADDR));
*/
static int __init stallion_module_init(void)
{
+ struct stlbrd *brdp;
+ struct stlconf conf;
unsigned int i, retval;
printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
spin_lock_init(&stallion_lock);
spin_lock_init(&brd_lock);
- stl_initbrds();
+/*
+ * Find any dynamically supported boards. That is via module load
+ * line options.
+ */
+ for (i = stl_nrbrds; i < stl_nargs; i++) {
+ memset(&conf, 0, sizeof(conf));
+ if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
+ continue;
+ if ((brdp = stl_allocbrd()) == NULL)
+ continue;
+ brdp->brdnr = i;
+ brdp->brdtype = conf.brdtype;
+ brdp->ioaddr1 = conf.ioaddr1;
+ brdp->ioaddr2 = conf.ioaddr2;
+ brdp->irq = conf.irq;
+ brdp->irqtype = conf.irqtype;
+ if (stl_brdinit(brdp))
+ kfree(brdp);
+ else
+ stl_nrbrds = i + 1;
+ }
retval = pci_register_driver(&stl_pcidriver);
if (retval)
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff