[PATCH] dvb: let other frontends support FE_DISHNETWORK_SEND_LEGACY_CMD

Add support to FE_DISHNETWORK_SEND_LEGACY_CMD code to support other frontends
besides stv0299.  The generic code is a fallback in the case that it doesn't
work for some specific frontends (again stv0299 being a good example).

Signed-off-by: NooneImportant <nxhxzi702@sneakemail.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index a8bc842..e36dbd9 100644 (file)
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -577,6 +577,49 @@ static void dvb_frontend_stop(struct dvb_frontend *fe)
                                fepriv->thread_pid);
 }
 
+s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime)
+{
+       return ((curtime.tv_usec < lasttime.tv_usec) ?
+               1000000 - lasttime.tv_usec + curtime.tv_usec :
+               curtime.tv_usec - lasttime.tv_usec);
+}
+EXPORT_SYMBOL(timeval_usec_diff);
+
+static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec)
+{
+       curtime->tv_usec += add_usec;
+       if (curtime->tv_usec >= 1000000) {
+               curtime->tv_usec -= 1000000;
+               curtime->tv_sec++;
+       }
+}
+
+/*
+ * Sleep until gettimeofday() > waketime + add_usec
+ * This needs to be as precise as possible, but as the delay is
+ * usually between 2ms and 32ms, it is done using a scheduled msleep
+ * followed by usleep (normally a busy-wait loop) for the remainder
+ */
+void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec)
+{
+       struct timeval lasttime;
+       s32 delta, newdelta;
+
+       timeval_usec_add(waketime, add_usec);
+
+       do_gettimeofday(&lasttime);
+       delta = timeval_usec_diff(lasttime, *waketime);
+       if (delta > 2500) {
+               msleep((delta - 1500) / 1000);
+               do_gettimeofday(&lasttime);
+               newdelta = timeval_usec_diff(lasttime, *waketime);
+               delta = (newdelta > delta) ? 0 : newdelta;
+       }
+       if (delta > 0)
+               udelay(delta);
+}
+EXPORT_SYMBOL(dvb_frontend_sleep_until);
+
 static int dvb_frontend_start(struct dvb_frontend *fe)
 {
        int ret;
@@ -728,6 +771,60 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
                        err = fe->ops->dishnetwork_send_legacy_command(fe, (unsigned int) parg);
                        fepriv->state = FESTATE_DISEQC;
                        fepriv->status = 0;
+               } else if (fe->ops->set_voltage) {
+                       /*
+                        * NOTE: This is a fallback condition.  Some frontends
+                        * (stv0299 for instance) take longer than 8msec to
+                        * respond to a set_voltage command.  Those switches
+                        * need custom routines to switch properly.  For all
+                        * other frontends, the following shoule work ok.
+                        * Dish network legacy switches (as used by Dish500)
+                        * are controlled by sending 9-bit command words
+                        * spaced 8msec apart.
+                        * the actual command word is switch/port dependant
+                        * so it is up to the userspace application to send
+                        * the right command.
+                        * The command must always start with a '0' after
+                        * initialization, so parg is 8 bits and does not
+                        * include the initialization or start bit
+                        */
+                       unsigned int cmd = ((unsigned int) parg) << 1;
+                       struct timeval nexttime;
+                       struct timeval tv[10];
+                       int i;
+                       u8 last = 1;
+                       if (dvb_frontend_debug)
+                               printk("%s switch command: 0x%04x\n", __FUNCTION__, cmd);
+                       do_gettimeofday(&nexttime);
+                       if (dvb_frontend_debug)
+                               memcpy(&tv[0], &nexttime, sizeof(struct timeval));
+                       /* before sending a command, initialize by sending
+                        * a 32ms 18V to the switch
+                        */
+                       fe->ops->set_voltage(fe, SEC_VOLTAGE_18);
+                       dvb_frontend_sleep_until(&nexttime, 32000);
+
+                       for (i = 0; i < 9; i++) {
+                               if (dvb_frontend_debug)
+                                       do_gettimeofday(&tv[i + 1]);
+                               if ((cmd & 0x01) != last) {
+                                       /* set voltage to (last ? 13V : 18V) */
+                                       fe->ops->set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
+                                       last = (last) ? 0 : 1;
+                               }
+                               cmd = cmd >> 1;
+                               if (i != 8)
+                                       dvb_frontend_sleep_until(&nexttime, 8000);
+                       }
+                       if (dvb_frontend_debug) {
+                               printk("%s(%d): switch delay (should be 32k followed by all 8k\n",
+                                       __FUNCTION__, fe->dvb->num);
+                               for (i = 1; i < 10; i++)
+                                       printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i]));
+                       }
+                       err = 0;
+                       fepriv->state = FESTATE_DISEQC;
+                       fepriv->status = 0;
                }
                break;
 

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 9c2c1d1..348c9b0 100644 (file)
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -101,4 +101,7 @@ extern int dvb_register_frontend(struct dvb_adapter* dvb,
 
 extern int dvb_unregister_frontend(struct dvb_frontend* fe);
 
+extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec);
+extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime);
+
 #endif

diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c
index b187661..ae00d7a 100644 (file)
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -387,36 +387,6 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag
        };
 }
 
-static inline s32 stv0299_calc_usec_delay (struct timeval lasttime, struct timeval curtime)
-{
-       return ((curtime.tv_usec < lasttime.tv_usec) ?
-               1000000 - lasttime.tv_usec + curtime.tv_usec :
-               curtime.tv_usec - lasttime.tv_usec);
-}
-
-static void stv0299_sleep_until (struct timeval *waketime, u32 add_usec)
-{
-       struct timeval lasttime;
-       s32 delta, newdelta;
-
-       waketime->tv_usec += add_usec;
-       if (waketime->tv_usec >= 1000000) {
-               waketime->tv_usec -= 1000000;
-               waketime->tv_sec++;
-       }
-
-       do_gettimeofday (&lasttime);
-       delta = stv0299_calc_usec_delay (lasttime, *waketime);
-       if (delta > 2500) {
-               msleep ((delta - 1500) / 1000);
-               do_gettimeofday (&lasttime);
-               newdelta = stv0299_calc_usec_delay (lasttime, *waketime);
-               delta = (newdelta > delta) ? 0 : newdelta;
-       }
-       if (delta > 0)
-               udelay (delta);
-}
-
 static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
 {
        struct stv0299_state* state = fe->demodulator_priv;
@@ -444,7 +414,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
                memcpy (&tv[0], &nexttime, sizeof (struct timeval));
        stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */
 
-       stv0299_sleep_until (&nexttime, 32000);
+       dvb_frontend_sleep_until(&nexttime, 32000);
 
        for (i=0; i<9; i++) {
                if (debug_legacy_dish_switch)
@@ -458,13 +428,13 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd)
                cmd = cmd >> 1;
 
                if (i != 8)
-                       stv0299_sleep_until (&nexttime, 8000);
+                       dvb_frontend_sleep_until(&nexttime, 8000);
        }
        if (debug_legacy_dish_switch) {
                printk ("%s(%d): switch delay (should be 32k followed by all 8k\n",
                        __FUNCTION__, fe->dvb->num);
-               for (i=1; i < 10; i++)
-                       printk ("%d: %d\n", i, stv0299_calc_usec_delay (tv[i-1] , tv[i]));
+               for (i = 1; i < 10; i++)
+                       printk ("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i]));
        }
 
        return 0;