[ISDN] Hisax: eliminate many unnecessary references to CardType[]

For the vast majority of CardType[card->typ] uses (but not all!),
the string is constant for each driver.  Therefore, we may replace
CardType[card->typ] with the actual string describing the driver, making
each printk() a bit more simple.

This also has the nice, intended side effect of greatly reducing
external references to hisax global CardType[].  This will be of value
once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/isdn/hisax/asuscom.c b/drivers/isdn/hisax/asuscom.c
index 61e69e9..b96f318 100644 (file)
--- a/drivers/isdn/hisax/asuscom.c
+++ b/drivers/isdn/hisax/asuscom.c
@@ -20,8 +20,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *Asuscom_revision = "$Revision: 1.14.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -376,8 +374,7 @@ setup_asuscom(struct IsdnCard *card)
        cs->irq = card->para[0];
        if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %x-%x already in use\n",
-                      CardType[card->typ],
+                      "HiSax: ISDNLink config port %x-%x already in use\n",
                       cs->hw.asus.cfg_reg,
                       cs->hw.asus.cfg_reg + bytecnt);
                return (0);

diff --git a/drivers/isdn/hisax/avm_a1.c b/drivers/isdn/hisax/avm_a1.c
index d9028e9..eb6b432 100644 (file)
--- a/drivers/isdn/hisax/avm_a1.c
+++ b/drivers/isdn/hisax/avm_a1.c
@@ -16,7 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *avm_revision = "$Revision: 2.15.2.4 $";
 
 #define         AVM_A1_STAT_ISAC       0x01
@@ -200,16 +199,14 @@ setup_avm_a1(struct IsdnCard *card)
        cs->irq = card->para[0];
        if (!request_region(cs->hw.avm.cfg_reg, 8, "avm cfg")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %x-%x already in use\n",
-                      CardType[card->typ],
+                      "HiSax: AVM A1 config port %x-%x already in use\n",
                       cs->hw.avm.cfg_reg,
                       cs->hw.avm.cfg_reg + 8);
                return (0);
        }
        if (!request_region(cs->hw.avm.isac + 32, 32, "HiSax isac")) {
                printk(KERN_WARNING
-                      "HiSax: %s isac ports %x-%x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 isac ports %x-%x already in use\n",
                       cs->hw.avm.isac + 32,
                       cs->hw.avm.isac + 64);
                release_ioregs(cs, 0);
@@ -217,16 +214,14 @@ setup_avm_a1(struct IsdnCard *card)
        }
        if (!request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo")) {
                printk(KERN_WARNING
-                      "HiSax: %s isac fifo port %x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 isac fifo port %x already in use\n",
                       cs->hw.avm.isacfifo);
                release_ioregs(cs, 1);
                return (0);
        }
        if (!request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A")) {
                printk(KERN_WARNING
-                      "HiSax: %s hscx A ports %x-%x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 hscx A ports %x-%x already in use\n",
                       cs->hw.avm.hscx[0] + 32,
                       cs->hw.avm.hscx[0] + 64);
                release_ioregs(cs, 3);
@@ -234,16 +229,14 @@ setup_avm_a1(struct IsdnCard *card)
        }
        if (!request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo")) {
                printk(KERN_WARNING
-                      "HiSax: %s hscx A fifo port %x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 hscx A fifo port %x already in use\n",
                       cs->hw.avm.hscxfifo[0]);
                release_ioregs(cs, 7);
                return (0);
        }
        if (!request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B")) {
                printk(KERN_WARNING
-                      "HiSax: %s hscx B ports %x-%x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 hscx B ports %x-%x already in use\n",
                       cs->hw.avm.hscx[1] + 32,
                       cs->hw.avm.hscx[1] + 64);
                release_ioregs(cs, 0xf);
@@ -251,8 +244,7 @@ setup_avm_a1(struct IsdnCard *card)
        }
        if (!request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo")) {
                printk(KERN_WARNING
-                      "HiSax: %s hscx B fifo port %x already in use\n",
-                      CardType[cs->typ],
+                      "HiSax: AVM A1 hscx B fifo port %x already in use\n",
                       cs->hw.avm.hscxfifo[1]);
                release_ioregs(cs, 0x1f);
                return (0);
@@ -284,9 +276,8 @@ setup_avm_a1(struct IsdnCard *card)
        printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
               cs->hw.avm.cfg_reg, val);
 
-       printk(KERN_INFO
-              "HiSax: %s config irq:%d cfg:0x%X\n",
-              CardType[cs->typ], cs->irq,
+       printk(KERN_INFO "HiSax: AVM A1 config irq:%d cfg:0x%X\n",
+              cs->irq,
               cs->hw.avm.cfg_reg);
        printk(KERN_INFO
               "HiSax: isac:0x%X/0x%X\n",

diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 3d1bdc8..9ca2ee5 100644 (file)
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -20,8 +20,6 @@
 #include <linux/pci.h>
 #include "bkm_ax.h"
 
-extern const char *CardType[];
-
 static const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
 
 
@@ -284,15 +282,16 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
        I20_REGISTER_FILE *pI20_Regs;
 
        if (!cs->irq) {         /* IRQ range check ?? */
-               printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
                return (0);
        }
        cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
        /* Check suspecious address */
        pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
        if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
-               printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
-                      CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
+               printk(KERN_WARNING "HiSax: Telekom A4T address "
+                      "%lx-%lx suspicious\n",
+                      cs->hw.ax.base, cs->hw.ax.base + 4096);
                iounmap((void *) cs->hw.ax.base);
                cs->hw.ax.base = 0;
                return (0);
@@ -302,8 +301,9 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
        cs->hw.ax.isac_ale = GCS_1;
        cs->hw.ax.jade_ale = GCS_3;
 
-       printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
-              CardType[card->typ], cs->hw.ax.base, cs->irq);
+       printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
+              "0x%lX IRQ %d\n",
+              cs->hw.ax.base, cs->irq);
 
        setup_isac(cs);
        cs->readisac = &ReadISAC;
@@ -349,11 +349,12 @@ setup_bkm_a4t(struct IsdnCard *card)
                        break;
        }
        if (!found) {
-               printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
                return (0);
        }
        if (!pci_memaddr) {
-               printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Telekom A4T: "
+                      "No Memory base address\n");
                return (0);
        }
 

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 99ef3b4..e1ff471 100644 (file)
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -22,8 +22,6 @@
 
 #define        ATTEMPT_PCI_REMAPPING   /* Required for PLX rev 1 */
 
-extern const char *CardType[];
-
 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
 
 static const char *sct_quadro_subtypes[] =
@@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
                goto Start_IPAC;
        }
        if (!icnt)
-               printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
-                      CardType[cs->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
                       sct_quadro_subtypes[cs->subtyp]);
        writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
        writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
@@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card)
        if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
                cs->subtyp = card->para[0];
        else {
-               printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
-                       CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
+                      "subcontroller in configuration, default to 1\n");
                return (0);
        }
        if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
@@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card)
                        }
                }
                if (!found) {
-                       printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
-                               CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                               "Card not found\n",
                                sct_quadro_subtypes[cs->subtyp]);
                        return (0);
                }
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
                if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
-                       printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
-                               CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                               "PLX rev 1, remapping required!\n",
                                sct_quadro_subtypes[cs->subtyp]);
                        /* Restart PCI negotiation */
                        pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
@@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card)
 #endif /* End HACK */
        }
        if (!pci_irq) {         /* IRQ range check ?? */
-               printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
-                      CardType[card->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
                       sct_quadro_subtypes[cs->subtyp]);
                return (0);
        }
@@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card)
        pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
        pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
        if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
-               printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
-                      CardType[card->typ],
+               printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+                      "No IO base address(es)\n",
                       sct_quadro_subtypes[cs->subtyp]);
                return (0);
        }
@@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card)
        /* For isac and hscx data path */
        cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 
-       printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
-              CardType[card->typ],
+       printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
+              "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
               sct_quadro_subtypes[cs->subtyp],
               cs->hw.ax.plx_adr,
               cs->hw.ax.base,
@@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card)
        cs->cardmsg = &BKM_card_msg;
        cs->irq_func = &bkm_interrupt_ipac;
 
-       printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
-               CardType[card->typ],
+       printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
                sct_quadro_subtypes[cs->subtyp],
                readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
        return (1);

diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index f66620a..0ea3b46 100644 (file)
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -19,7 +19,6 @@
 #include "ipac.h"
 #include <linux/pci.h>
 
-extern const char *CardType[];
 static const char *gazel_revision = "$Revision: 2.19.2.4 $";
 
 #define R647      1
@@ -479,8 +478,8 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs)
        return 0;
 
       error:
-       printk(KERN_WARNING "Gazel: %s io ports 0x%x-0x%x already in use\n",
-              CardType[cs->typ], adr, adr + len);
+       printk(KERN_WARNING "Gazel: io ports 0x%x-0x%x already in use\n",
+              adr, adr + len);
        return 1;
 }
 

diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index fba8b62..f126566 100644 (file)
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -22,8 +22,6 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
-extern const char *CardType[];
-
 static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
 
 /* table entry in the PCI devices list */

diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 05482d2..f4a2138 100644 (file)
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -18,8 +18,6 @@
 #include <linux/interrupt.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
-
 static const char *hfcsx_revision = "$Revision: 1.12.2.5 $";
 
 /***************************************/

diff --git a/drivers/isdn/hisax/isurf.c b/drivers/isdn/hisax/isurf.c
index 55de069..ca41617 100644 (file)
--- a/drivers/isdn/hisax/isurf.c
+++ b/drivers/isdn/hisax/isurf.c
@@ -17,8 +17,6 @@
 #include "isdnl1.h"
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
-
 static const char *ISurf_revision = "$Revision: 1.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -251,22 +249,19 @@ setup_isurf(struct IsdnCard *card)
                        return(0);
                }
 #else
-               printk(KERN_WARNING "HiSax: %s port/mem not set\n",
-                       CardType[card->typ]);
+               printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
                return (0);
 #endif
        }
        if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
                printk(KERN_WARNING
-                       "HiSax: %s config port %x already in use\n",
-                       CardType[card->typ],
+                       "HiSax: Siemens I-Surf config port %x already in use\n",
                        cs->hw.isurf.reset);
                        return (0);
        }
        if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
-               printk(KERN_WARNING
-                       "HiSax: %s memory region %lx-%lx already in use\n",
-                       CardType[card->typ],
+               printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
+                       "%lx-%lx already in use\n",
                        cs->hw.isurf.phymem,
                        cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
                release_region(cs->hw.isurf.reset, 1);

diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c
index 252d79d..2d18d4f 100644 (file)
--- a/drivers/isdn/hisax/ix1_micro.c
+++ b/drivers/isdn/hisax/ix1_micro.c
@@ -24,7 +24,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *ix1_revision = "$Revision: 2.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -288,15 +287,15 @@ setup_ix1micro(struct IsdnCard *card)
        if (cs->hw.ix1.cfg_reg) {
                if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
                        printk(KERN_WARNING
-                         "HiSax: %s config port %x-%x already in use\n",
-                              CardType[card->typ],
+                         "HiSax: ITK ix1-micro Rev.2 config port "
+                         "%x-%x already in use\n",
                               cs->hw.ix1.cfg_reg,
                               cs->hw.ix1.cfg_reg + 4);
                        return (0);
                }
        }
-       printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
-               CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
+       printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
+               cs->irq, cs->hw.ix1.cfg_reg);
        setup_isac(cs);
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;

diff --git a/drivers/isdn/hisax/mic.c b/drivers/isdn/hisax/mic.c
index a81d175..2539430 100644 (file)
--- a/drivers/isdn/hisax/mic.c
+++ b/drivers/isdn/hisax/mic.c
@@ -16,8 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *mic_revision = "$Revision: 1.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -210,8 +208,7 @@ setup_mic(struct IsdnCard *card)
 
        if (!request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %x-%x already in use\n",
-                      CardType[card->typ],
+                      "HiSax: ith mic config port %x-%x already in use\n",
                       cs->hw.mic.cfg_reg,
                       cs->hw.mic.cfg_reg + bytecnt);
                return (0);

diff --git a/drivers/isdn/hisax/netjet.h b/drivers/isdn/hisax/netjet.h
index 4d89d3e..68e504d 100644 (file)
--- a/drivers/isdn/hisax/netjet.h
+++ b/drivers/isdn/hisax/netjet.h
@@ -12,8 +12,6 @@
  *
  */
 
-extern const char *CardType[];
-
 #define byteout(addr,val) outb(val,addr)
 #define bytein(addr) inb(addr)
 

diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index bd99211..421b8e6 100644 (file)
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
 static const char *niccy_revision = "$Revision: 1.21.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card)
                cs->subtyp = NICCY_PNP;
                cs->irq = card->para[0];
                if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
-                       printk(KERN_WARNING "HiSax: %s data port %x-%x "
-                               "already in use\n", CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
+                               "already in use\n",
                                cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
                        return 0;
                }
                if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
-                       printk(KERN_WARNING "HiSax: %s address port %x-%x "
-                               "already in use\n", CardType[card->typ],
+                       printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
+                               "already in use\n",
                                cs->hw.niccy.isac_ale,
                                cs->hw.niccy.isac_ale + 1);
                        release_region(cs->hw.niccy.isac, 2);
@@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card)
                cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
                if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
                        printk(KERN_WARNING
-                              "HiSax: %s data port %x-%x already in use\n",
-                              CardType[card->typ],
+                              "HiSax: NICCY data port %x-%x already in use\n",
                               cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
                        return 0;
                }
                if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
                        printk(KERN_WARNING
-                              "HiSax: %s pci port %x-%x already in use\n",
-                              CardType[card->typ],
+                              "HiSax: NICCY pci port %x-%x already in use\n",
                               cs->hw.niccy.cfg_reg,
                               cs->hw.niccy.cfg_reg + 0x40);
                        release_region(cs->hw.niccy.isac, 4);
@@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card)
                return 0;
 #endif                         /* CONFIG_PCI_LEGACY */
        }
-       printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
-               CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
+       printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
+               (cs->subtyp == 1) ? "PnP" : "PCI",
                cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
        setup_isac(cs);
        cs->readisac = &ReadISAC;

diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index a895dfe..8d36ccc 100644 (file)
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -235,8 +235,7 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card,
                cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
        if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %#lx-%#lx already in use\n",
-                      CardType[card->typ],
+                      "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
                       cs->hw.njet.base,
                       cs->hw.njet.base + bytecnt);
                return (0);

diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index f017d38..d306c94 100644 (file)
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -197,8 +197,8 @@ static int __devinit nju_cs_init_rest(struct IsdnCard *card,
                cs->hw.njet.base, cs->irq);
        if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %#lx-%#lx already in use\n",
-                      CardType[card->typ],
+                      "HiSax: NETspider-U config port %#lx-%#lx "
+                      "already in use\n",
                       cs->hw.njet.base,
                       cs->hw.njet.base + bytecnt);
                return (0);

diff --git a/drivers/isdn/hisax/s0box.c b/drivers/isdn/hisax/s0box.c
index 150ef68..16d00b5 100644 (file)
--- a/drivers/isdn/hisax/s0box.c
+++ b/drivers/isdn/hisax/s0box.c
@@ -16,7 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *s0box_revision = "$Revision: 2.6.2.4 $";
 
 static inline void
@@ -231,19 +230,15 @@ setup_s0box(struct IsdnCard *card)
        cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
        cs->irq = card->para[0];
        if (!request_region(cs->hw.teles3.cfg_reg,8, "S0Box parallel I/O")) {
-               printk(KERN_WARNING
-                      "HiSax: %s ports %x-%x already in use\n",
-                      CardType[cs->typ],
+               printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n",
                        cs->hw.teles3.cfg_reg,
                        cs->hw.teles3.cfg_reg + 7);
                return 0;
        }
-       printk(KERN_INFO
-               "HiSax: %s config irq:%d isac:0x%x  cfg:0x%x\n",
-               CardType[cs->typ], cs->irq,
+       printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x  cfg:0x%x\n",
+               cs->irq,
                cs->hw.teles3.isac, cs->hw.teles3.cfg_reg);
-       printk(KERN_INFO
-               "HiSax: hscx A:0x%x  hscx B:0x%x\n",
+       printk(KERN_INFO "HiSax: hscx A:0x%x  hscx B:0x%x\n",
                cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]);
        setup_isac(cs);
        cs->readisac = &ReadISAC;

diff --git a/drivers/isdn/hisax/saphir.c b/drivers/isdn/hisax/saphir.c
index c99b166..b34a81d 100644 (file)
--- a/drivers/isdn/hisax/saphir.c
+++ b/drivers/isdn/hisax/saphir.c
@@ -18,7 +18,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static char *saphir_rev = "$Revision: 1.10.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -260,15 +259,14 @@ setup_saphir(struct IsdnCard *card)
        cs->irq = card->para[0];
        if (!request_region(cs->hw.saphir.cfg_reg, 6, "saphir")) {
                printk(KERN_WARNING
-                       "HiSax: %s config port %x-%x already in use\n",
-                       CardType[card->typ],
+                       "HiSax: HST Saphir config port %x-%x already in use\n",
                        cs->hw.saphir.cfg_reg,
                        cs->hw.saphir.cfg_reg + 5);
                return (0);
        }
 
-       printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
-               CardType[cs->typ], cs->irq, cs->hw.saphir.cfg_reg);
+       printk(KERN_INFO "HiSax: HST Saphir config irq:%d io:0x%X\n",
+              cs->irq, cs->hw.saphir.cfg_reg);
 
        setup_isac(cs);
        cs->hw.saphir.timer.function = (void *) SaphirWatchDog;

diff --git a/drivers/isdn/hisax/sportster.c b/drivers/isdn/hisax/sportster.c
index 0220950..0a53759 100644 (file)
--- a/drivers/isdn/hisax/sportster.c
+++ b/drivers/isdn/hisax/sportster.c
@@ -18,7 +18,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *sportster_revision = "$Revision: 1.16.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -192,9 +191,9 @@ get_io_range(struct IsdnCardState *cs)
        for (i=0;i<64;i++) {
                adr = cs->hw.spt.cfg_reg + i *1024;
                if (!request_region(adr, 8, "sportster")) {
-                       printk(KERN_WARNING
-                               "HiSax: %s config port %x-%x already in use\n",
-                               CardType[cs->typ], adr, adr + 8);
+                       printk(KERN_WARNING "HiSax: USR Sportster config port "
+                               "%x-%x already in use\n",
+                               adr, adr + 8);
                        break;
                } 
        }
@@ -247,8 +246,8 @@ setup_sportster(struct IsdnCard *card)
                        printk(KERN_WARNING "Sportster: wrong IRQ\n");
                        return(0);
        }
-       printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
-               CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
+       printk(KERN_INFO "HiSax: USR Sportster config irq:%d cfg:0x%X\n",
+               cs->irq, cs->hw.spt.cfg_reg);
        setup_isac(cs);
        cs->readisac = &ReadISAC;
        cs->writeisac = &WriteISAC;

diff --git a/drivers/isdn/hisax/teleint.c b/drivers/isdn/hisax/teleint.c
index 0909662..b0ce4ae 100644 (file)
--- a/drivers/isdn/hisax/teleint.c
+++ b/drivers/isdn/hisax/teleint.c
@@ -16,8 +16,6 @@
 #include "hfc_2bs0.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *TeleInt_revision = "$Revision: 1.16.2.5 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -286,8 +284,7 @@ setup_TeleInt(struct IsdnCard *card)
        init_timer(&cs->hw.hfc.timer);
        if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) {
                printk(KERN_WARNING
-                      "HiSax: %s config port %x-%x already in use\n",
-                      CardType[card->typ],
+                      "HiSax: TeleInt config port %x-%x already in use\n",
                       cs->hw.hfc.addr,
                       cs->hw.hfc.addr + 2);
                return (0);

diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 4393003..28b08de 100644 (file)
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -19,7 +19,6 @@
 #include "isdnl1.h"
 #include <linux/pci.h>
 
-extern const char *CardType[];
 static const char *telespci_revision = "$Revision: 2.23.2.3 $";
 
 #define ZORAN_PO_RQ_PEN        0x02000000
@@ -329,8 +328,8 @@ setup_telespci(struct IsdnCard *card)
        /* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
 
        printk(KERN_INFO
-              "HiSax: %s config irq:%d mem:%p\n",
-              CardType[cs->typ], cs->irq,
+              "HiSax: Teles PCI config irq:%d mem:%p\n",
+              cs->irq,
               cs->hw.teles0.membase);
 
        setup_isac(cs);

diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 39129b9..bb1c8dd 100644 (file)
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -38,8 +38,6 @@ static const PCI_ENTRY id_list[] =
 #define W6692_DYNALINK 1
 #define W6692_USR      2
 
-extern const char *CardType[];
-
 static const char *w6692_revision = "$Revision: 1.18.2.4 $";
 
 #define DBUSY_TIMER_VALUE 80