m68knommu: fix system reset for ColdFire 527x family

The sofwtare reset control for the 527x ColdFire family is based on
the same Reset Control Unit as the 528x ColdFire family. So use the
same reset code for both.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h
index 4496c0a..5fbc96d 100644 (file)
--- a/arch/m68k/include/asm/system_no.h
+++ b/arch/m68k/include/asm/system_no.h
@@ -264,18 +264,18 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
        : /* No output */               \
        : "o" (*(char *)MCF_MBAR) );    \
 })
-#elif defined(CONFIG_M528x)
+#elif defined(CONFIG_M528x) || defined(CONFIG_M527x)
 /*
- * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
- * that when set, resets the MCF528x.
+ * Most of the newer ColdFire family members have a proper RESET unit.
+ * Use the software reset control bit in the Reset Control Register (RCR).
  */
 #define HARD_RESET_NOW() \
-({                                             \
-       unsigned char volatile *reset;          \
-       asm("move.w     #0x2700, %sr");         \
+({                                                                     \
+       unsigned char volatile *reset;                                  \
+       asm("move.w #0x2700, %sr");                                     \
        reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));    \
-       while(1)                                \
-       *reset |= (0x01 << 7);\
+       while (1)                                                       \
+               *reset |= (0x01 << 7);                                  \
 })
 #elif defined(CONFIG_M523x)
 #define HARD_RESET_NOW() ({            \