/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2006 Anton Altaparmakov
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
#include <linux/stddef.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h> /* For bdev_hardsect_size(). */
{
const char *read_err_str = "Unable to read %s boot sector.";
struct buffer_head *bh_primary, *bh_backup;
- long nr_blocks = NTFS_SB(sb)->nr_blocks;
+ sector_t nr_blocks = NTFS_SB(sb)->nr_blocks;
/* Try to read primary boot sector. */
if ((bh_primary = sb_bread(sb, 0))) {
/*
* If we managed to read sector zero and the volume is not
* read-only, copy the found, valid backup boot sector to the
- * primary boot sector.
+ * primary boot sector. Note we only copy the actual boot
+ * sector structure, not the actual whole device sector as that
+ * may be bigger and would potentially damage the $Boot system
+ * file (FIXME: Would be nice to know if the backup boot sector
+ * on a large sector device contains the whole boot loader or
+ * just the first 512 bytes).
*/
if (!(sb->s_flags & MS_RDONLY)) {
ntfs_warning(sb, "Hot-fix: Recovering invalid primary "
"boot sector from backup copy.");
memcpy(bh_primary->b_data, bh_backup->b_data,
- sb->s_blocksize);
+ NTFS_BLOCK_SIZE);
mark_buffer_dirty(bh_primary);
sync_dirty_buffer(bh_primary);
if (buffer_uptodate(bh_primary)) {
vol->sector_size);
ntfs_debug("vol->sector_size_bits = %i (0x%x)", vol->sector_size_bits,
vol->sector_size_bits);
- if (vol->sector_size != vol->sb->s_blocksize)
- ntfs_warning(vol->sb, "The boot sector indicates a sector size "
- "different from the device sector size.");
+ if (vol->sector_size < vol->sb->s_blocksize) {
+ ntfs_error(vol->sb, "Sector size (%i) is smaller than the "
+ "device block size (%lu). This is not "
+ "supported. Sorry.", vol->sector_size,
+ vol->sb->s_blocksize);
+ return FALSE;
+ }
ntfs_debug("sectors_per_cluster = 0x%x", b->bpb.sectors_per_cluster);
sectors_per_cluster_bits = ffs(b->bpb.sectors_per_cluster) - 1;
ntfs_debug("sectors_per_cluster_bits = 0x%x",
ntfs_debug("vol->cluster_size = %i (0x%x)", vol->cluster_size,
vol->cluster_size);
ntfs_debug("vol->cluster_size_mask = 0x%x", vol->cluster_size_mask);
- ntfs_debug("vol->cluster_size_bits = %i (0x%x)",
- vol->cluster_size_bits, vol->cluster_size_bits);
- if (vol->sector_size > vol->cluster_size) {
- ntfs_error(vol->sb, "Sector sizes above the cluster size are "
- "not supported. Sorry.");
- return FALSE;
- }
- if (vol->sb->s_blocksize > vol->cluster_size) {
- ntfs_error(vol->sb, "Cluster sizes smaller than the device "
- "sector size are not supported. Sorry.");
+ ntfs_debug("vol->cluster_size_bits = %i", vol->cluster_size_bits);
+ if (vol->cluster_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Cluster size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->cluster_size, vol->sector_size);
return FALSE;
}
clusters_per_mft_record = b->clusters_per_mft_record;
* we store $MFT/$DATA, the table of mft records in the page cache.
*/
if (vol->mft_record_size > PAGE_CACHE_SIZE) {
- ntfs_error(vol->sb, "Mft record size %i (0x%x) exceeds the "
- "page cache size on your system %lu (0x%lx). "
+ ntfs_error(vol->sb, "Mft record size (%i) exceeds the "
+ "PAGE_CACHE_SIZE on your system (%lu). "
"This is not supported. Sorry.",
- vol->mft_record_size, vol->mft_record_size,
- PAGE_CACHE_SIZE, PAGE_CACHE_SIZE);
+ vol->mft_record_size, PAGE_CACHE_SIZE);
+ return FALSE;
+ }
+ /* We cannot support mft record sizes below the sector size. */
+ if (vol->mft_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Mft record size (%i) is smaller than the "
+ "sector size (%i). This is not supported. "
+ "Sorry.", vol->mft_record_size,
+ vol->sector_size);
return FALSE;
}
clusters_per_index_record = b->clusters_per_index_record;
ntfs_debug("vol->index_record_size_bits = %i (0x%x)",
vol->index_record_size_bits,
vol->index_record_size_bits);
+ /* We cannot support index record sizes below the sector size. */
+ if (vol->index_record_size < vol->sector_size) {
+ ntfs_error(vol->sb, "Index record size (%i) is smaller than "
+ "the sector size (%i). This is not "
+ "supported. Sorry.", vol->index_record_size,
+ vol->sector_size);
+ return FALSE;
+ }
/*
* Get the size of the volume in clusters and check for 64-bit-ness.
* Windows currently only uses 32 bits to save the clusters so we do
}
ll = sle64_to_cpu(b->mft_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFT LCN is beyond end of volume. Weird.");
+ ntfs_error(vol->sb, "MFT LCN (%lli, 0x%llx) is beyond end of "
+ "volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mft_lcn = ll;
ntfs_debug("vol->mft_lcn = 0x%llx", (long long)vol->mft_lcn);
ll = sle64_to_cpu(b->mftmirr_lcn);
if (ll >= vol->nr_clusters) {
- ntfs_error(vol->sb, "MFTMirr LCN is beyond end of volume. "
- "Weird.");
+ ntfs_error(vol->sb, "MFTMirr LCN (%lli, 0x%llx) is beyond end "
+ "of volume. Weird.", (unsigned long long)ll,
+ (unsigned long long)ll);
return FALSE;
}
vol->mftmirr_lcn = ll;
ntfs_volume *vol;
struct buffer_head *bh;
struct inode *tmp_ino;
- int result;
+ int blocksize, result;
ntfs_debug("Entering.");
#ifndef NTFS_RW
if (!parse_options(vol, (char*)opt))
goto err_out_now;
+ /* We support sector sizes up to the PAGE_CACHE_SIZE. */
+ if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) {
+ if (!silent)
+ ntfs_error(sb, "Device has unsupported sector size "
+ "(%i). The maximum supported sector "
+ "size on this architecture is %lu "
+ "bytes.",
+ bdev_hardsect_size(sb->s_bdev),
+ PAGE_CACHE_SIZE);
+ goto err_out_now;
+ }
/*
- * TODO: Fail safety check. In the future we should really be able to
- * cope with this being the case, but for now just bail out.
+ * Setup the device access block size to NTFS_BLOCK_SIZE or the hard
+ * sector size, whichever is bigger.
*/
- if (bdev_hardsect_size(sb->s_bdev) > NTFS_BLOCK_SIZE) {
+ blocksize = sb_min_blocksize(sb, NTFS_BLOCK_SIZE);
+ if (blocksize < NTFS_BLOCK_SIZE) {
if (!silent)
- ntfs_error(sb, "Device has unsupported hardsect_size.");
+ ntfs_error(sb, "Unable to set device block size.");
goto err_out_now;
}
-
- /* Setup the device access block size to NTFS_BLOCK_SIZE. */
- if (sb_set_blocksize(sb, NTFS_BLOCK_SIZE) != NTFS_BLOCK_SIZE) {
+ BUG_ON(blocksize != sb->s_blocksize);
+ ntfs_debug("Set device block size to %i bytes (block size bits %i).",
+ blocksize, sb->s_blocksize_bits);
+ /* Determine the size of the device in units of block_size bytes. */
+ if (!i_size_read(sb->s_bdev->bd_inode)) {
if (!silent)
- ntfs_error(sb, "Unable to set block size.");
+ ntfs_error(sb, "Unable to determine device size.");
goto err_out_now;
}
-
- /* Get the size of the device in units of NTFS_BLOCK_SIZE bytes. */
vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
- NTFS_BLOCK_SIZE_BITS;
-
+ sb->s_blocksize_bits;
/* Read the boot sector and return unlocked buffer head to it. */
if (!(bh = read_ntfs_boot_sector(sb, silent))) {
if (!silent)
ntfs_error(sb, "Not an NTFS volume.");
goto err_out_now;
}
-
/*
- * Extract the data from the boot sector and setup the ntfs super block
+ * Extract the data from the boot sector and setup the ntfs volume
* using it.
*/
result = parse_ntfs_boot_sector(vol, (NTFS_BOOT_SECTOR*)bh->b_data);
-
- /* Initialize the cluster and mft allocators. */
- ntfs_setup_allocators(vol);
-
brelse(bh);
-
if (!result) {
if (!silent)
ntfs_error(sb, "Unsupported NTFS filesystem.");
goto err_out_now;
}
-
/*
- * TODO: When we start coping with sector sizes different from
- * NTFS_BLOCK_SIZE, we now probably need to set the blocksize of the
- * device (probably to NTFS_BLOCK_SIZE).
+ * If the boot sector indicates a sector size bigger than the current
+ * device block size, switch the device block size to the sector size.
+ * TODO: It may be possible to support this case even when the set
+ * below fails, we would just be breaking up the i/o for each sector
+ * into multiple blocks for i/o purposes but otherwise it should just
+ * work. However it is safer to leave disabled until someone hits this
+ * error message and then we can get them to try it without the setting
+ * so we know for sure that it works.
*/
-
+ if (vol->sector_size > blocksize) {
+ blocksize = sb_set_blocksize(sb, vol->sector_size);
+ if (blocksize != vol->sector_size) {
+ if (!silent)
+ ntfs_error(sb, "Unable to set device block "
+ "size to sector size (%i).",
+ vol->sector_size);
+ goto err_out_now;
+ }
+ BUG_ON(blocksize != sb->s_blocksize);
+ vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >>
+ sb->s_blocksize_bits;
+ ntfs_debug("Changed device block size to %i bytes (block size "
+ "bits %i) to match volume sector size.",
+ blocksize, sb->s_blocksize_bits);
+ }
+ /* Initialize the cluster and mft allocators. */
+ ntfs_setup_allocators(vol);
/* Setup remaining fields in the super block. */
sb->s_magic = NTFS_SB_MAGIC;
-
/*
* Ntfs allows 63 bits for the file size, i.e. correct would be:
* sb->s_maxbytes = ~0ULL >> 1;
* without overflowing the index or to 2^63 - 1, whichever is smaller.
*/
sb->s_maxbytes = MAX_LFS_FILESIZE;
-
+ /* Ntfs measures time in 100ns intervals. */
sb->s_time_gran = 100;
-
/*
* Now load the metadata required for the page cache and our address
* space operations to function. We do this by setting up a specialised
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff