--- /dev/null
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related functions.
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License"). You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/firmware.h>
+
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+#ifndef SDIO_DEVICE_ID_MARVELL_8688BT
+#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105
+#endif
+
+/* The btmrvl_sdio_remove() callback function is called
+ * when user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, a MODULE_SHUTDOWN_REQ
+ * command is sent to firmware and interrupt will be disabled.
+ * If the card is removed, there is no need to send command
+ * or disable interrupt.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
+static const struct sdio_device_id btmrvl_sdio_ids[] = {
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8688BT)},
+ {0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
+
+static struct btmrvl_sdio_device btmrvl_sdio_devices[] = {
+ {
+ .dev_id = SDIO_DEVICE_ID_MARVELL_8688BT,
+ .helper = "sd8688_helper.bin",
+ .firmware = "sd8688.bin",
+ },
+};
+
+static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
+{
+ u8 reg;
+ int ret;
+
+ BT_DBG("Enter");
+
+ reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+ if (!ret)
+ card->rx_unit = reg;
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
+{
+ int ret;
+ u8 fws0, fws1;
+
+ BT_DBG("Enter");
+
+ *dat = 0;
+
+ fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+
+ if (!ret)
+ fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+
+ if (ret) {
+ BT_DBG("Leave");
+ return -EIO;
+ }
+
+ *dat = (((u16) fws1) << 8) | fws0;
+
+ BT_DBG("Leave");
+
+ return 0;
+}
+
+static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
+{
+ int ret;
+ u8 reg;
+
+ BT_DBG("Enter");
+
+ reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+ if (!ret)
+ *dat = (u16) reg << card->rx_unit;
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
+ u8 mask)
+{
+ int ret;
+
+ BT_DBG("Enter");
+
+ sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+ if (ret) {
+ BT_ERR("Unable to enable the host interrupt!");
+ ret = -EIO;
+ }
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
+ u8 mask)
+{
+ int ret;
+ u8 host_int_mask;
+
+ BT_DBG("Enter");
+
+ host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+ if (ret) {
+ ret = -EIO;
+ goto done;
+ }
+
+ host_int_mask &= ~mask;
+
+ sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+ if (ret < 0) {
+ BT_ERR("Unable to disable the host interrupt!");
+ ret = -EIO;
+ goto done;
+ }
+
+ ret = 0;
+
+done:
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
+{
+ unsigned int tries;
+ int ret;
+ u8 status;
+
+ BT_DBG("Enter");
+
+ for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
+ status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+ if (ret)
+ goto failed;
+ if ((status & bits) == bits)
+ goto done;
+
+ udelay(1);
+ }
+
+ ret = -ETIMEDOUT;
+
+failed:
+ BT_ERR("FAILED! ret=%d", ret);
+
+done:
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
+ int pollnum)
+{
+ int ret = -ETIMEDOUT;
+ u16 firmwarestat;
+ unsigned int tries;
+
+ BT_DBG("Enter");
+
+ /* Wait for firmware to become ready */
+ for (tries = 0; tries < pollnum; tries++) {
+ if (btmrvl_sdio_read_fw_status(card, &firmwarestat) < 0)
+ continue;
+
+ if (firmwarestat == FIRMWARE_READY) {
+ ret = 0;
+ break;
+ } else {
+ msleep(10);
+ }
+ }
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
+{
+ const struct firmware *fw_helper = NULL;
+ const u8 *helper = NULL;
+ int ret;
+ void *tmphlprbuf = NULL;
+ int tmphlprbufsz, hlprblknow, helperlen;
+ u8 *helperbuf;
+ u32 tx_len;
+
+ BT_DBG("Enter");
+
+ ret = request_firmware(&fw_helper, card->helper,
+ &card->func->dev);
+ if ((ret < 0) || !fw_helper) {
+ BT_ERR("request_firmware(helper) failed, error code = %d",
+ ret);
+ ret = -ENOENT;
+ goto done;
+ }
+
+ helper = fw_helper->data;
+ helperlen = fw_helper->size;
+
+ BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
+ helperlen, SDIO_BLOCK_SIZE);
+
+ tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+
+ tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL);
+ if (!tmphlprbuf) {
+ BT_ERR("Unable to allocate buffer for helper."
+ " Terminating download");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ memset(tmphlprbuf, 0, tmphlprbufsz);
+
+ helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
+
+ /* Perform helper data transfer */
+ tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
+ - SDIO_HEADER_LEN;
+ hlprblknow = 0;
+
+ do {
+ ret = btmrvl_sdio_poll_card_status(card,
+ CARD_IO_READY | DN_LD_CARD_RDY);
+ if (ret < 0) {
+ BT_ERR("Helper download poll status timeout @ %d",
+ hlprblknow);
+ goto done;
+ }
+
+ /* Check if there is more data? */
+ if (hlprblknow >= helperlen)
+ break;
+
+ if (helperlen - hlprblknow < tx_len)
+ tx_len = helperlen - hlprblknow;
+
+ /* Little-endian */
+ helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
+ helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
+ helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
+ helperbuf[3] = ((tx_len & 0xff000000) >> 24);
+
+ memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
+ tx_len);
+
+ /* Now send the data */
+ ret = sdio_writesb(card->func, card->ioport,
+ helperbuf,
+ FIRMWARE_TRANSFER_NBLOCK *
+ SDIO_BLOCK_SIZE);
+ if (ret < 0) {
+ BT_ERR("IO error during helper download @ %d",
+ hlprblknow);
+ goto done;
+ }
+
+ hlprblknow += tx_len;
+ } while (true);
+
+ BT_DBG("Transferring helper image EOF block");
+
+ memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
+
+ ret = sdio_writesb(card->func, card->ioport, helperbuf,
+ SDIO_BLOCK_SIZE);
+ if (ret < 0) {
+ BT_ERR("IO error in writing helper image EOF block");
+ goto done;
+ }
+
+ ret = 0;
+
+done:
+ kfree(tmphlprbuf);
+ if (fw_helper)
+ release_firmware(fw_helper);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
+{
+ const struct firmware *fw_firmware = NULL;
+ const u8 *firmware = NULL;
+ int firmwarelen, tmpfwbufsz, ret;
+ unsigned int tries, offset;
+ u8 base0, base1;
+ void *tmpfwbuf = NULL;
+ u8 *fwbuf;
+ u16 len;
+ int txlen = 0, tx_blocks = 0, count = 0;
+
+ BT_DBG("Enter");
+
+ ret = request_firmware(&fw_firmware, card->firmware,
+ &card->func->dev);
+ if ((ret < 0) || !fw_firmware) {
+ BT_ERR("request_firmware(firmware) failed, error code = %d",
+ ret);
+ ret = -ENOENT;
+ goto done;
+ }
+
+ firmware = fw_firmware->data;
+ firmwarelen = fw_firmware->size;
+
+ BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
+
+ tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+ tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL);
+ if (!tmpfwbuf) {
+ BT_ERR("Unable to allocate buffer for firmware."
+ " Terminating download");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ memset(tmpfwbuf, 0, tmpfwbufsz);
+
+ /* Ensure aligned firmware buffer */
+ fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
+
+ /* Perform firmware data transfer */
+ offset = 0;
+ do {
+ ret = btmrvl_sdio_poll_card_status(card,
+ CARD_IO_READY | DN_LD_CARD_RDY);
+ if (ret < 0) {
+ BT_ERR("FW download with helper poll status"
+ " timeout @ %d", offset);
+ goto done;
+ }
+
+ /* Check if there is more data ? */
+ if (offset >= firmwarelen)
+ break;
+
+ for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+ base0 = sdio_readb(card->func,
+ SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+ if (ret) {
+ BT_ERR("BASE0 register read failed:"
+ " base0 = 0x%04X(%d)."
+ " Terminating download",
+ base0, base0);
+ ret = -EIO;
+ goto done;
+ }
+ base1 = sdio_readb(card->func,
+ SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+ if (ret) {
+ BT_ERR("BASE1 register read failed:"
+ " base1 = 0x%04X(%d)."
+ " Terminating download",
+ base1, base1);
+ ret = -EIO;
+ goto done;
+ }
+
+ len = (((u16) base1) << 8) | base0;
+ if (len)
+ break;
+
+ udelay(10);
+ }
+
+ if (!len)
+ break;
+ else if (len > BTM_UPLD_SIZE) {
+ BT_ERR("FW download failure @%d, invalid length %d",
+ offset, len);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ txlen = len;
+
+ if (len & BIT(0)) {
+ count++;
+ if (count > MAX_WRITE_IOMEM_RETRY) {
+ BT_ERR("FW download failure @%d, "
+ "over max retry count", offset);
+ ret = -EIO;
+ goto done;
+ }
+ BT_ERR("FW CRC error indicated by the helper: "
+ "len = 0x%04X, txlen = %d", len, txlen);
+ len &= ~BIT(0);
+ /* Set txlen to 0 so as to resend from same offset */
+ txlen = 0;
+ } else {
+ count = 0;
+
+ /* Last block ? */
+ if (firmwarelen - offset < txlen)
+ txlen = firmwarelen - offset;
+
+ tx_blocks =
+ (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+
+ memcpy(fwbuf, &firmware[offset], txlen);
+ }
+
+ ret = sdio_writesb(card->func, card->ioport, fwbuf,
+ tx_blocks * SDIO_BLOCK_SIZE);
+
+ if (ret < 0) {
+ BT_ERR("FW download, writesb(%d) failed @%d",
+ count, offset);
+ sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
+ &ret);
+ if (ret)
+ BT_ERR("writeb failed (CFG)");
+ }
+
+ offset += txlen;
+ } while (true);
+
+ BT_DBG("FW download over, size %d bytes", offset);
+
+ ret = 0;
+
+done:
+ kfree(tmpfwbuf);
+
+ if (fw_firmware)
+ release_firmware(fw_firmware);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
+{
+ u16 buf_len = 0;
+ int ret, buf_block_len, blksz;
+ struct sk_buff *skb = NULL;
+ u32 type;
+ u8 *payload = NULL;
+ struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* Read the length of data to be transferred */
+ ret = btmrvl_sdio_read_rx_len(card, &buf_len);
+ if (ret < 0) {
+ BT_ERR("read rx_len failed");
+ ret = -EIO;
+ goto exit;
+ }
+
+ blksz = SDIO_BLOCK_SIZE;
+ buf_block_len = (buf_len + blksz - 1) / blksz;
+
+ if (buf_len <= SDIO_HEADER_LEN
+ || (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
+ BT_ERR("invalid packet length: %d", buf_len);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* Allocate buffer */
+ skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
+ GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ goto exit;
+ }
+
+ if ((u32) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
+ skb_put(skb, (u32) skb->data & (BTSDIO_DMA_ALIGN - 1));
+ skb_pull(skb, (u32) skb->data & (BTSDIO_DMA_ALIGN - 1));
+ }
+
+ payload = skb->tail;
+
+ ret = sdio_readsb(card->func, payload, card->ioport,
+ buf_block_len * blksz);
+ if (ret < 0) {
+ BT_ERR("readsb failed: %d", ret);
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* This is SDIO specific header length: byte[2][1][0], type: byte[3]
+ * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
+ */
+
+ buf_len = payload[0];
+ buf_len |= (u16) payload[1] << 8;
+ type = payload[3];
+
+ switch (type) {
+ case HCI_ACLDATA_PKT:
+ case HCI_SCODATA_PKT:
+ case HCI_EVENT_PKT:
+ bt_cb(skb)->pkt_type = type;
+ skb->dev = (void *)hdev;
+ skb_put(skb, buf_len);
+ skb_pull(skb, SDIO_HEADER_LEN);
+
+ if (type == HCI_EVENT_PKT)
+ btmrvl_check_evtpkt(priv, skb);
+
+ hci_recv_frame(skb);
+ hdev->stat.byte_rx += buf_len;
+ break;
+
+ case MRVL_VENDOR_PKT:
+ bt_cb(skb)->pkt_type = HCI_VENDOR_PKT;
+ skb->dev = (void *)hdev;
+ skb_put(skb, buf_len);
+ skb_pull(skb, SDIO_HEADER_LEN);
+
+ if (btmrvl_process_event(priv, skb))
+ hci_recv_frame(skb);
+
+ hdev->stat.byte_rx += buf_len;
+ break;
+
+ default:
+ BT_ERR("Unknow packet type:%d", type);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
+ blksz * buf_block_len);
+
+ kfree_skb(skb);
+ skb = NULL;
+ break;
+ }
+
+exit:
+ if (ret) {
+ hdev->stat.err_rx++;
+ if (skb)
+ kfree_skb(skb);
+ }
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_get_int_status(struct btmrvl_private *priv, u8 * ireg)
+{
+ int ret;
+ u8 sdio_ireg = 0;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+ BT_DBG("Enter");
+
+ *ireg = 0;
+
+ sdio_ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+ if (ret) {
+ BT_ERR("sdio_readb: read int status register failed");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (sdio_ireg != 0) {
+ /*
+ * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+ * Clear the interrupt status register and re-enable the
+ * interrupt.
+ */
+ BT_DBG("sdio_ireg = 0x%x", sdio_ireg);
+
+ sdio_writeb(card->func, ~(sdio_ireg) & (DN_LD_HOST_INT_STATUS |
+ UP_LD_HOST_INT_STATUS),
+ HOST_INTSTATUS_REG, &ret);
+ if (ret) {
+ BT_ERR("sdio_writeb: clear int status register "
+ "failed");
+ ret = -EIO;
+ goto done;
+ }
+ }
+
+ if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
+ if (priv->btmrvl_dev.tx_dnld_rdy)
+ BT_DBG("tx_done already received: "
+ " int_status=0x%x", sdio_ireg);
+ else
+ priv->btmrvl_dev.tx_dnld_rdy = true;
+ }
+
+ if (sdio_ireg & UP_LD_HOST_INT_STATUS)
+ btmrvl_sdio_card_to_host(priv);
+
+ *ireg = sdio_ireg;
+
+ ret = 0;
+
+done:
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static void btmrvl_sdio_interrupt(struct sdio_func *func)
+{
+ struct btmrvl_private *priv;
+ struct hci_dev *hcidev;
+ struct btmrvl_sdio_card *card;
+ u8 ireg = 0;
+
+ BT_DBG("Enter");
+
+ card = sdio_get_drvdata(func);
+ if (card && card->priv) {
+ priv = card->priv;
+ hcidev = priv->btmrvl_dev.hcidev;
+
+ if (btmrvl_sdio_get_int_status(priv, &ireg))
+ BT_ERR("reading HOST_INT_STATUS_REG failed");
+ else
+ BT_DBG("HOST_INT_STATUS_REG %#x", ireg);
+
+ btmrvl_interrupt(priv);
+ }
+
+ BT_DBG("Leave");
+}
+
+static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
+{
+ int ret = 0, i;
+ u8 reg;
+ struct sdio_func *func;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_ERR("Error: card or function is NULL!");
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ func = card->func;
+
+ for (i = 0; i < ARRAY_SIZE(btmrvl_sdio_devices); i++) {
+ if (func->device == btmrvl_sdio_devices[i].dev_id)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(btmrvl_sdio_devices)) {
+ BT_ERR("Error: unknown device id 0x%x", func->device);
+ ret = -EINVAL;
+ goto failed;
+ }
+
+ card->helper = btmrvl_sdio_devices[i].helper;
+ card->firmware = btmrvl_sdio_devices[i].firmware;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret) {
+ BT_ERR("sdio_enable_func() failed: ret=%d", ret);
+ ret = -EIO;
+ goto release_host;
+ }
+
+ ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
+ if (ret) {
+ BT_ERR("sdio_claim_irq failed: ret=%d", ret);
+ ret = -EIO;
+ goto disable_func;
+ }
+
+ ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
+ if (ret) {
+ BT_ERR("cannot set SDIO block size");
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport = reg;
+
+ reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport |= (reg << 8);
+
+ reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+ if (ret < 0) {
+ ret = -EIO;
+ goto release_irq;
+ }
+
+ card->ioport |= (reg << 16);
+
+ BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
+
+ sdio_set_drvdata(func, card);
+
+ sdio_release_host(func);
+
+ BT_DBG("Leave");
+ return 0;
+
+release_irq:
+ sdio_release_irq(func);
+
+disable_func:
+ sdio_disable_func(func);
+
+release_host:
+ sdio_release_host(func);
+
+failed:
+ BT_DBG("Leave");
+ return ret;
+}
+
+static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
+{
+ BT_DBG("Enter");
+
+ if (card && card->func) {
+ sdio_claim_host(card->func);
+ sdio_release_irq(card->func);
+ sdio_disable_func(card->func);
+ sdio_release_host(card->func);
+ sdio_set_drvdata(card->func, NULL);
+ }
+
+ BT_DBG("Leave");
+
+ return 0;
+}
+
+static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
+{
+ int ret;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_DBG("Leave");
+ return -EINVAL;
+ }
+
+ sdio_claim_host(card->func);
+
+ ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
+
+ btmrvl_sdio_get_rx_unit(card);
+
+ sdio_release_host(card->func);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
+{
+ int ret;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_DBG("Leave");
+ return -EINVAL;
+ }
+
+ sdio_claim_host(card->func);
+
+ ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
+
+ sdio_release_host(card->func);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
+ u8 *payload, u16 nb)
+{
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+ int ret = 0;
+ int buf_block_len;
+ int blksz;
+ int i = 0;
+ u8 *buf = NULL;
+ void *tmpbuf = NULL;
+ int tmpbufsz;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ BT_DBG("Leave");
+ return -EINVAL;
+ }
+
+ buf = payload;
+ if ((u32) payload & (BTSDIO_DMA_ALIGN - 1)) {
+ tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN);
+ tmpbuf = kmalloc(tmpbufsz, GFP_KERNEL);
+ memset(tmpbuf, 0, tmpbufsz);
+ buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
+ memcpy(buf, payload, nb);
+ }
+
+ blksz = SDIO_BLOCK_SIZE;
+ buf_block_len = (nb + blksz - 1) / blksz;
+
+ sdio_claim_host(card->func);
+
+ do {
+ /* Transfer data to card */
+ ret = sdio_writesb(card->func, card->ioport, buf,
+ buf_block_len * blksz);
+ if (ret < 0) {
+ i++;
+ BT_ERR("i=%d writesb failed: %d", i, ret);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
+ payload, nb);
+ ret = -EIO;
+ if (i > MAX_WRITE_IOMEM_RETRY)
+ goto exit;
+ }
+ } while (ret);
+
+ priv->btmrvl_dev.tx_dnld_rdy = false;
+
+exit:
+ sdio_release_host(card->func);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
+{
+ int ret = 0;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ BT_DBG("Leave");
+ return -EINVAL;
+ }
+ sdio_claim_host(card->func);
+
+ if (!btmrvl_sdio_verify_fw_download(card, 1)) {
+ BT_DBG("Firmware already downloaded!");
+ goto done;
+ }
+
+ ret = btmrvl_sdio_download_helper(card);
+ if (ret) {
+ BT_ERR("Failed to download helper!");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (btmrvl_sdio_download_fw_w_helper(card)) {
+ BT_ERR("Failed to download firmware!");
+ ret = -EIO;
+ goto done;
+ }
+
+ if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+ BT_ERR("FW failed to be active in time!");
+ ret = -ETIMEDOUT;
+ goto done;
+ }
+
+done:
+ sdio_release_host(card->func);
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
+{
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+ int ret = 0;
+
+ BT_DBG("Enter");
+
+ if (!card || !card->func) {
+ BT_ERR("card or function is NULL!");
+ BT_DBG("Leave");
+ return -EINVAL;
+ }
+
+ sdio_claim_host(card->func);
+
+ sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+
+ sdio_release_host(card->func);
+
+ BT_DBG("wake up firmware");
+
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static int btmrvl_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ int ret = 0;
+ struct btmrvl_private *priv = NULL;
+ struct btmrvl_sdio_card *card = NULL;
+
+ BT_DBG("Enter");
+
+ BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
+ id->vendor, id->device, id->class, func->num);
+
+ card = kzalloc(sizeof(*card), GFP_KERNEL);
+ if (!card) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ card->func = func;
+
+ if (btmrvl_sdio_register_dev(card) < 0) {
+ BT_ERR("Failed to register BT device!");
+ ret = -ENODEV;
+ goto free_card;
+ }
+
+ /* Disable the interrupts on the card */
+ btmrvl_sdio_disable_host_int(card);
+
+ if (btmrvl_sdio_download_fw(card)) {
+ BT_ERR("Downloading firmware failed!");
+ ret = -ENODEV;
+ goto unreg_dev;
+ }
+
+ msleep(100);
+
+ btmrvl_sdio_enable_host_int(card);
+
+ priv = btmrvl_add_card(card);
+ if (!priv) {
+ BT_ERR("Initializing card failed!");
+ ret = -ENODEV;
+ goto disable_host_int;
+ }
+
+ card->priv = priv;
+
+ /* Initialize the interface specific function pointers */
+ priv->hw_host_to_card = btmrvl_sdio_host_to_card;
+ priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
+
+ strncpy(priv->btmrvl_dev.name, "btmrvl_sdio0",
+ sizeof(priv->btmrvl_dev.name));
+
+ btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+
+ BT_DBG("Leave");
+
+ return 0;
+
+disable_host_int:
+ btmrvl_sdio_disable_host_int(card);
+unreg_dev:
+ btmrvl_sdio_unregister_dev(card);
+free_card:
+ kfree(card);
+done:
+ BT_DBG("Leave");
+
+ return ret;
+}
+
+static void btmrvl_sdio_remove(struct sdio_func *func)
+{
+ struct btmrvl_sdio_card *card;
+
+ BT_DBG("Enter");
+
+ if (func) {
+ card = sdio_get_drvdata(func);
+ if (card) {
+ /* Send SHUTDOWN command & disable interrupt
+ * if user removes the module.
+ */
+ if (user_rmmod) {
+ btmrvl_send_module_cfg_cmd(card->priv,
+ MODULE_SHUTDOWN_REQ);
+ btmrvl_sdio_disable_host_int(card);
+ }
+ BT_DBG("unregester dev");
+ btmrvl_sdio_unregister_dev(card);
+ btmrvl_remove_card(card->priv);
+ kfree(card);
+ }
+ }
+
+ BT_DBG("Leave");
+}
+
+static struct sdio_driver bt_mrvl_sdio = {
+ .name = "btmrvl_sdio",
+ .id_table = btmrvl_sdio_ids,
+ .probe = btmrvl_sdio_probe,
+ .remove = btmrvl_sdio_remove,
+};
+
+static int btmrvl_sdio_init_module(void)
+{
+ BT_DBG("Enter");
+
+ if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
+ BT_ERR("SDIO Driver Registration Failed");
+ BT_DBG("Leave");
+ return -ENODEV;
+ }
+
+ /* Clear the flag in case user removes the card. */
+ user_rmmod = 0;
+
+ BT_DBG("Leave");
+
+ return 0;
+}
+
+static void btmrvl_sdio_exit_module(void)
+{
+ BT_DBG("Enter");
+
+ /* Set the flag as user is removing this module. */
+ user_rmmod = 1;
+
+ sdio_unregister_driver(&bt_mrvl_sdio);
+
+ BT_DBG("Leave");
+}
+
+module_init(btmrvl_sdio_init_module);
+module_exit(btmrvl_sdio_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell BT-over-SDIO Driver v" VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff