Merge branch 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...

* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: ap325rxa: Revert ov772x support.
  serial: sh-sci: fix overrun error handling for SH7785 SCIF.
  sh: Storage class should be before const qualifier

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7c35787..72da416 100644 (file)
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <media/ov772x.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -224,7 +223,6 @@ static void camera_power(int val)
 }
 
 #ifdef CONFIG_I2C
-/* support for the old ncm03j camera */
 static unsigned char camera_ncm03j_magic[] =
 {
        0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -245,23 +243,6 @@ static unsigned char camera_ncm03j_magic[] =
        0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
 };
 
-static int camera_probe(void)
-{
-       struct i2c_adapter *a = i2c_get_adapter(0);
-       struct i2c_msg msg;
-       int ret;
-
-       camera_power(1);
-       msg.addr = 0x6e;
-       msg.buf = camera_ncm03j_magic;
-       msg.len = 2;
-       msg.flags = 0;
-       ret = i2c_transfer(a, &msg, 1);
-       camera_power(0);
-
-       return ret;
-}
-
 static int camera_set_capture(struct soc_camera_platform_info *info,
                              int enable)
 {
@@ -313,35 +294,8 @@ static struct platform_device camera_device = {
                .platform_data  = &camera_info,
        },
 };
-
-static int __init camera_setup(void)
-{
-       if (camera_probe() > 0)
-               platform_device_register(&camera_device);
-
-       return 0;
-}
-late_initcall(camera_setup);
-
 #endif /* CONFIG_I2C */
 
-static int ov7725_power(struct device *dev, int mode)
-{
-       camera_power(0);
-       if (mode)
-               camera_power(1);
-
-       return 0;
-}
-
-static struct ov772x_camera_info ov7725_info = {
-       .buswidth  = SOCAM_DATAWIDTH_8,
-       .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
-       .link = {
-               .power  = ov7725_power,
-       },
-};
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
        .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
        SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
@@ -392,6 +346,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
        &ap325rxa_nor_flash_device,
        &lcdc_device,
        &ceu_device,
+#ifdef CONFIG_I2C
+       &camera_device,
+#endif
        &nand_flash_device,
        &sdcard_cn3_device,
 };
@@ -400,10 +357,6 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
        {
                I2C_BOARD_INFO("pcf8563", 0x51),
        },
-       {
-               I2C_BOARD_INFO("ov772x", 0x21),
-               .platform_data = &ov7725_info,
-       },
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {

diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 020a96f..4a5e597 100644 (file)
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -18,8 +18,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
 #if (CONFIG_SH_CLK_MD == 0)

diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 3599828..022e89f 100644 (file)
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,7 +133,7 @@
 # define SCSPTR3       0xffed0024      /* 16 bit SCIF */
 # define SCSPTR4       0xffee0024      /* 16 bit SCIF */
 # define SCSPTR5       0xffef0024      /* 16 bit SCIF */
-# define SCIF_OPER     0x0001          /* Overrun error bit */
+# define SCIF_ORER     0x0001          /* Overrun error bit */
 # define SCSCR_INIT(port)      0x3a    /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \