V4L/DVB (13002): Adds support for Zolid Hybrid PCI card:

http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner

test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
  switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
  lacks colour.
- No sound problems.
- radio untested.

Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.

Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.

Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 0ac4d25..2620d60 100644 (file)
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -171,3 +171,4 @@
 170 -> AverMedia AverTV Studio 505              [1461:a115]
 171 -> Beholder BeholdTV X7                     [5ace:7595]
 172 -> RoverMedia TV Link Pro FM                [19d1:0138]
+173 -> Zolid Hybrid TV Tuner PCI                [1131:2004]

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 14b9ba4..9210d3e 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5257,6 +5257,27 @@ struct saa7134_board saa7134_boards[] = {
                        .amux = TV,
                },
        },
+       [SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+               .name           = "Zolid Hybrid TV Tuner PCI",
+               .audio_clock    = 0x00187de7,
+               .tuner_type     = TUNER_PHILIPS_TDA8290,
+               .radio_type     = UNSET,
+               .tuner_addr     = ADDR_UNSET,
+               .radio_addr     = ADDR_UNSET,
+               .tuner_config   = 0,
+               .mpeg           = SAA7134_MPEG_DVB,
+               .ts_type        = SAA7134_MPEG_TS_PARALLEL,
+               .inputs         = {{
+                       .name = name_tv,
+                       .vmux = 1,
+                       .amux = TV,
+                       .tv   = 1,
+               } },
+               .radio = {      /* untested */
+                       .name = name_radio,
+                       .amux = TV,
+               },
+       },
 
 };
 
@@ -6390,6 +6411,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
                .subdevice    = 0x0138, /* LifeView FlyTV Prime30 OEM */
                .driver_data  = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
        }, {
+               .vendor       = PCI_VENDOR_ID_PHILIPS,
+               .device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+               .subvendor    = PCI_VENDOR_ID_PHILIPS,
+               .subdevice    = 0x2004,
+               .driver_data  = SAA7134_BOARD_ZOLID_HYBRID_PCI,
+       }, {
                /* --- boards without eeprom + subsystem ID --- */
                .vendor       = PCI_VENDOR_ID_PHILIPS,
                .device       = PCI_DEVICE_ID_PHILIPS_SAA7134,

diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 7e1ffd8..a26e997 100644 (file)
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = {
        .probe_tuner = TDA829X_DONT_PROBE,
 };
 
+static struct tda10048_config zolid_tda10048_config = {
+       .demod_address    = 0x10 >> 1,
+       .output_mode      = TDA10048_PARALLEL_OUTPUT,
+       .fwbulkwritelen   = TDA10048_BULKWRITE_200,
+       .inversion        = TDA10048_INVERSION_ON,
+       .dtv6_if_freq_khz = TDA10048_IF_3300,
+       .dtv7_if_freq_khz = TDA10048_IF_3500,
+       .dtv8_if_freq_khz = TDA10048_IF_4000,
+       .clk_freq_khz     = TDA10048_CLK_16000,
+       .disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+       .gate    = TDA18271_GATE_ANALOG,
+};
+
 /* ==================================================================
  * Core code
  */
@@ -1489,6 +1505,19 @@ static int dvb_init(struct saa7134_dev *dev)
                                        __func__);
 
                break;
+       case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+               fe0->dvb.frontend = dvb_attach(tda10048_attach,
+                                              &zolid_tda10048_config,
+                                              &dev->i2c_adap);
+               if (fe0->dvb.frontend != NULL) {
+                       dvb_attach(tda829x_attach, fe0->dvb.frontend,
+                                  &dev->i2c_adap, 0x4b,
+                                  &tda829x_no_probe);
+                       dvb_attach(tda18271_attach, fe0->dvb.frontend,
+                                  0x60, &dev->i2c_adap,
+                                  &zolid_tda18271_config);
+               }
+               break;
        default:
                wprintk("Huh? unknown DVB card?\n");
                break;

diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d18bb96..6ee3e9b 100644 (file)
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -296,6 +296,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_505  170
 #define SAA7134_BOARD_BEHOLD_X7             171
 #define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
+#define SAA7134_BOARD_ZOLID_HYBRID_PCI         173
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8