[PATCH] aoe: update the documentation to mention aoetools

update the documentation to mention aoetools

Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 1212987..3a4dbe4 100644 (file)
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
   It has many tips and hints!
 
+The aoetools are userland programs that are designed to work with this
+driver.  The aoetools are on sourceforge.
+
+  http://aoetools.sourceforge.net/
+
+The scripts in this Documentation/aoe directory are intended to
+document the use of the driver and are not necessary if you install
+the aoetools.
+
+
 CREATING DEVICE NODES
 
   Users of udev should find the block device nodes created
@@ -33,19 +43,17 @@ USING DEVICE NODES
   "cat /dev/etherd/err" blocks, waiting for error diagnostic output,
   like any retransmitted packets.
 
-  The /dev/etherd/interfaces special file is obsoleted by the
-  aoe_iflist boot option and module option (and its sysfs entry
-  described in the next section).
   "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
   limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic from
-  untrusted networks should be ignored as a matter of security.
+  untrusted networks should be ignored as a matter of security.  See
+  also the aoe_iflist driver option described below.
 
   "echo > /dev/etherd/discover" tells the driver to find out what AoE
   devices are available.
 
   These character devices may disappear and be replaced by sysfs
-  counterparts, so distribution maintainers are encouraged to create
-  scripts that use these devices.
+  counterparts.  Using the commands in aoetools insulates users from
+  these implementation details.
 
   The block devices are named like this:
 
@@ -69,7 +77,8 @@ USING SYSFS
   through which we are communicating with the remote AoE device.
 
   There is a script in this directory that formats this information
-  in a convenient way.
+  in a convenient way.  Users with aoetools can use the aoe-stat
+  command.
 
   root@makki root# sh Documentation/aoe/status.sh 
      e10.0            eth3              up
@@ -100,9 +109,9 @@ USING SYSFS
   sysfs entry can be read from as well as written to.
 
   It's helpful to trigger discovery after setting the list of allowed
-  interfaces.  If your distro provides an aoe-discover script, you can
-  use that.  Otherwise, you can directly use the /dev/etherd/discover
-  file described above.
+  interfaces.  The aoetools package provides an aoe-discover script
+  for this purpose.  You can also directly use the
+  /dev/etherd/discover special file described above.
 
 DRIVER OPTIONS