Param[0]
Bitmask:
0:1 Data size:
- '00' 16 bit
+ '00' 16 bit
'01' 20 bit
'10' 24 bit
2:7 Unused
(for left justified MSB first mode, 20 bit only)
10:11 Unused
12:13 Channel format:
- '00' right justified MSB first mode
- '01' left justified MSB first mode
- '10' I2S mode
+ '00' right justified MSB first mode
+ '01' left justified MSB first mode
+ '10' I2S mode
14:15 Unused
16:21 Right justify bit count
22:31 Unused
Param[0]
Bitmask:
0:1 '00' 44.1Khz
- '01' 48Khz
- '10' 32Khz
- '11' reserved
+ '01' 48Khz
+ '10' 32Khz
+ '11' reserved
2:3 '01'=Layer I
'10'=Layer II
4:7 Bitrate:
- Index | Layer I | Layer II
- ------+-------------+------------
- '0000' | free format | free format
- '0001' | 32 kbit/s | 32 kbit/s
- '0010' | 64 kbit/s | 48 kbit/s
- '0011' | 96 kbit/s | 56 kbit/s
- '0100' | 128 kbit/s | 64 kbit/s
- '0101' | 160 kbit/s | 80 kbit/s
- '0110' | 192 kbit/s | 96 kbit/s
- '0111' | 224 kbit/s | 112 kbit/s
- '1000' | 256 kbit/s | 128 kbit/s
- '1001' | 288 kbit/s | 160 kbit/s
- '1010' | 320 kbit/s | 192 kbit/s
- '1011' | 352 kbit/s | 224 kbit/s
- '1100' | 384 kbit/s | 256 kbit/s
- '1101' | 416 kbit/s | 320 kbit/s
- '1110' | 448 kbit/s | 384 kbit/s
- Note: For Layer II, not all combinations of total bitrate
- and mode are allowed. See ISO11172-3 3-Annex B, Table 3-B.2
+ Index | Layer I | Layer II
+ ------+-------------+------------
+ '0000' | free format | free format
+ '0001' | 32 kbit/s | 32 kbit/s
+ '0010' | 64 kbit/s | 48 kbit/s
+ '0011' | 96 kbit/s | 56 kbit/s
+ '0100' | 128 kbit/s | 64 kbit/s
+ '0101' | 160 kbit/s | 80 kbit/s
+ '0110' | 192 kbit/s | 96 kbit/s
+ '0111' | 224 kbit/s | 112 kbit/s
+ '1000' | 256 kbit/s | 128 kbit/s
+ '1001' | 288 kbit/s | 160 kbit/s
+ '1010' | 320 kbit/s | 192 kbit/s
+ '1011' | 352 kbit/s | 224 kbit/s
+ '1100' | 384 kbit/s | 256 kbit/s
+ '1101' | 416 kbit/s | 320 kbit/s
+ '1110' | 448 kbit/s | 384 kbit/s
+ Note: For Layer II, not all combinations of total bitrate
+ and mode are allowed. See ISO11172-3 3-Annex B, Table 3-B.2
8:9 '00'=Stereo
- '01'=JointStereo
- '10'=Dual
- '11'=Mono
+ '01'=JointStereo
+ '10'=Dual
+ '11'=Mono
10:11 Mode Extension used in joint_stereo mode.
- In Layer I and II they indicate which subbands are in
+ In Layer I and II they indicate which subbands are in
intensity_stereo. All other subbands are coded in stereo.
- '00' subbands 4-31 in intensity_stereo, bound==4
- '01' subbands 8-31 in intensity_stereo, bound==8
- '10' subbands 12-31 in intensity_stereo, bound==12
- '11' subbands 16-31 in intensity_stereo, bound==16
+ '00' subbands 4-31 in intensity_stereo, bound==4
+ '01' subbands 8-31 in intensity_stereo, bound==8
+ '10' subbands 12-31 in intensity_stereo, bound==12
+ '11' subbands 16-31 in intensity_stereo, bound==16
12:13 Emphasis:
- '00' None
- '01' 50/15uS
- '10' reserved
- '11' CCITT J.17
+ '00' None
+ '01' 50/15uS
+ '10' reserved
+ '11' CCITT J.17
14 CRC:
- '0' off
- '1' on
+ '0' off
+ '1' on
15 Copyright:
- '0' off
- '1' on
+ '0' off
+ '1' on
16 Generation:
- '0' copy
- '1' original
+ '0' copy
+ '1' original
-------------------------------------------------------------------------------
if changed to 0xffffffff DMA write interrupts break.
0x50 - always 0xffffffff
0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are
- 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the
+ 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the
interrupt masks???).
0x60-0x7C - random values
0x80 - first write linked list reg, for Encoder Memory addr
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
if (!create_proc_info_entry("driver/radio-typhoon", 0, NULL,
typhoon_get_info))
- printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n");
+ printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n");
#endif
return 0;
ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */
ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */
- /* I2C CLK */
+ /* I2C CLK */
/* 50MH-100k */
if (freq == 75) {
ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
- { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
+ { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
if (ir->rc5_gpio) {
u32 gpio;
- /* enable remote irq */
+ /* enable remote irq */
bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4);
gpio = bttv_gpio_read(&btv->c);
bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
{
struct video_picture *p = arg;
if(p->palette!=VIDEO_PALETTE_GREY)
- return -EINVAL;
+ return -EINVAL;
if(p->depth!=4 && p->depth!=6)
return -EINVAL;
} else {
if(cam->params.flicker_control.cam_register &
CPIA2_VP_FLICKER_MODES_50HZ) {
- mode = FLICKER_50;
+ mode = FLICKER_50;
} else {
- mode = FLICKER_60;
+ mode = FLICKER_60;
}
}
for(i=0; i<NUM_FLICKER_CONTROLS; i++) {
#ifdef HAVE_LGDT330X
static int lgdt3302_tuner_set_params(struct dvb_frontend* fe,
- struct dvb_frontend_parameters* params)
+ struct dvb_frontend_parameters* params)
{
/* FIXME make this routine use the tuner-simple code.
* It could probably be shared with a number of ATSC
RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
if (frame->scanstate == STATE_LINES) {
- int nextf;
+ int nextf;
frame->grabstate = FRAME_DONE;
wake_up_interruptible(&frame->wq);
RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw);
if (frame->scanstate == STATE_LINES) {
- int nextf;
+ int nextf;
frame->grabstate = FRAME_DONE;
wake_up_interruptible(&frame->wq);
struct video_picture *p = arg;
if(!((p->palette==VIDEO_PALETTE_RGB565 && p->depth==16)
||(p->palette==VIDEO_PALETTE_RGB555 && p->depth==15)))
- return -EINVAL;
+ return -EINVAL;
pd->picture= *p;
/*
ARG_IN(leds)
ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
- break;
+ break;
}
static void build_table_color(const unsigned int romtable[16][8],
- unsigned char p0004[16][1024],
+ unsigned char p0004[16][1024],
unsigned char p8004[16][256])
{
int compression_mode, j, k, bit, pw;
*
*/
static void DecompressBandBayer(struct pwc_dec23_private *pdec,
- const unsigned char *rawyuv,
+ const unsigned char *rawyuv,
unsigned char *rgbbayer,
unsigned int compressed_image_width,
unsigned int real_image_width)
case 0x101:
return "PAL MR sensor";
default:
- return "unknown type of sensor";
+ return "unknown type of sensor";
}
}
#endif
(device_hint[hint].pdev == NULL)) {
/* so far, so good... try serial number */
if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) {
- /* match! */
- video_nr = device_hint[hint].device_node;
- PWC_DEBUG_PROBE("Found hint, will try to register as /dev/video%d\n", video_nr);
- break;
+ /* match! */
+ video_nr = device_hint[hint].device_node;
+ PWC_DEBUG_PROBE("Found hint, will try to register as /dev/video%d\n", video_nr);
+ break;
}
}
}
break;
}
- /* V4L2 Layer */
- case VIDIOC_QUERYCAP:
- {
+ /* V4L2 Layer */
+ case VIDIOC_QUERYCAP:
+ {
struct v4l2_capability *cap = arg;
PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCAP) This application "\
return 0;
}
- case VIDIOC_ENUMINPUT:
- {
+ case VIDIOC_ENUMINPUT:
+ {
struct v4l2_input *i = arg;
if ( i->index ) /* Only one INPUT is supported */
return 0;
}
- case VIDIOC_G_INPUT:
+ case VIDIOC_G_INPUT:
{
int *i = arg;
*i = 0; /* Only one INPUT is supported */
return 0;
}
- case VIDIOC_S_INPUT:
- {
+ case VIDIOC_S_INPUT:
+ {
int *i = arg;
if ( *i ) { /* Only one INPUT is supported */
}
/* TODO: */
- case VIDIOC_QUERYCTRL:
+ case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *c = arg;
int i;
case VIDIOC_ENUM_FMT:
{
- struct v4l2_fmtdesc *f = arg;
+ struct v4l2_fmtdesc *f = arg;
int index;
if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
- /* We only support two format: the raw format, and YUV */
+ /* We only support two format: the raw format, and YUV */
index = f->index;
memset(f,0,sizeof(struct v4l2_fmtdesc));
f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
{
case 0:
/* RAW format */
- f->pixelformat = pdev->type<=646?V4L2_PIX_FMT_PWC1:V4L2_PIX_FMT_PWC2;
+ f->pixelformat = pdev->type<=646?V4L2_PIX_FMT_PWC1:V4L2_PIX_FMT_PWC2;
f->flags = V4L2_FMT_FLAG_COMPRESSED;
- strlcpy(f->description,"Raw Philips Webcam",sizeof(f->description));
+ strlcpy(f->description,"Raw Philips Webcam",sizeof(f->description));
break;
case 1:
- f->pixelformat = V4L2_PIX_FMT_YUV420;
- strlcpy(f->description,"4:2:0, planar, Y-Cb-Cr",sizeof(f->description));
+ f->pixelformat = V4L2_PIX_FMT_YUV420;
+ strlcpy(f->description,"4:2:0, planar, Y-Cb-Cr",sizeof(f->description));
break;
- default:
+ default:
return -EINVAL;
}
return 0;
}
- case VIDIOC_G_FMT:
+ case VIDIOC_G_FMT:
{
- struct v4l2_format *f = arg;
+ struct v4l2_format *f = arg;
PWC_DEBUG_IOCTL("ioctl(VIDIOC_G_FMT) return size %dx%d\n",pdev->image.x,pdev->image.y);
if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
case VIDIOC_TRY_FMT:
return pwc_vidioc_try_fmt(pdev, arg);
- case VIDIOC_S_FMT:
+ case VIDIOC_S_FMT:
return pwc_vidioc_set_fmt(pdev, arg);
case VIDIOC_G_STD:
enum saa6752hs_command {
SAA6752HS_COMMAND_RESET = 0,
- SAA6752HS_COMMAND_STOP = 1,
- SAA6752HS_COMMAND_START = 2,
- SAA6752HS_COMMAND_PAUSE = 3,
- SAA6752HS_COMMAND_RECONFIGURE = 4,
- SAA6752HS_COMMAND_SLEEP = 5,
+ SAA6752HS_COMMAND_STOP = 1,
+ SAA6752HS_COMMAND_START = 2,
+ SAA6752HS_COMMAND_PAUSE = 3,
+ SAA6752HS_COMMAND_RECONFIGURE = 4,
+ SAA6752HS_COMMAND_SLEEP = 5,
SAA6752HS_COMMAND_RECONFIGURE_FORCE = 6,
SAA6752HS_COMMAND_MAX
if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) {
/* set the target bitrate */
buf[0] = 0x80;
- buf[1] = params->vi_bitrate.target >> 8;
+ buf[1] = params->vi_bitrate.target >> 8;
buf[2] = params->vi_bitrate.target & 0xff;
i2c_master_send(client, buf, 3);
/* set the max bitrate */
buf[0] = 0x81;
- buf[1] = params->vi_bitrate.max >> 8;
+ buf[1] = params->vi_bitrate.max >> 8;
buf[2] = params->vi_bitrate.max & 0xff;
i2c_master_send(client, buf, 3);
} else {
/* set the target bitrate (no max bitrate for CBR) */
buf[0] = 0x81;
- buf[1] = params->vi_bitrate.target >> 8;
+ buf[1] = params->vi_bitrate.target >> 8;
buf[2] = params->vi_bitrate.target & 0xff;
i2c_master_send(client, buf, 3);
}
buf[2] = 0x0D;
i2c_master_send(client,buf,3);
- /* Set minimum Q-scale {4} */
+ /* Set minimum Q-scale {4} */
buf[0] = 0x82;
buf[1] = 0x04;
i2c_master_send(client,buf,2);
- /* Set maximum Q-scale {12} */
+ /* Set maximum Q-scale {12} */
buf[0] = 0x83;
buf[1] = 0x0C;
i2c_master_send(client,buf,2);
- /* Set Output Protocol */
+ /* Set Output Protocol */
buf[0] = 0xD0;
buf[1] = 0x81;
i2c_master_send(client,buf,2);
- /* Set video output stream format {TS} */
+ /* Set video output stream format {TS} */
buf[0] = 0xB0;
buf[1] = 0x05;
i2c_master_send(client,buf,2);
localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF;
localPMT[sizeof(PMT) - 1] = crc & 0xFF;
- /* Set Audio PID */
+ /* Set Audio PID */
buf[0] = 0xC1;
buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF;
buf[2] = h->params.ts_pid_audio & 0xFF;
break;
}
- /* output xbar always main channel */
+ /* output xbar always main channel */
saa_dsp_writel(dev, SAA7133_DIGITAL_OUTPUT_SEL1, 0xbbbb10);
if (left || right) { // We've got data, turn the input on
.radio = {
.name = name_radio,
.amux = LINE2,
- },
+ },
},
[SAA7134_BOARD_GOTVIEW_7135] = {
/* Mike Baikov <mike@baikov.com> */
struct tda9875 *t = i2c_get_clientdata(client);
dprintk("In tda9875_init\n");
tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/
- tda9875_write(client, TDA9875_MSR, 0x03 ); /* Monitor 0b00000XXX*/
+ tda9875_write(client, TDA9875_MSR, 0x03 ); /* Monitor 0b00000XXX*/
tda9875_write(client, TDA9875_C1MSB, 0x00 ); /*Car1(FM) MSB XMHz*/
tda9875_write(client, TDA9875_C1MIB, 0x00 ); /*Car1(FM) MIB XMHz*/
tda9875_write(client, TDA9875_C1LSB, 0x00 ); /*Car1(FM) LSB XMHz*/
switch (t->type) {
case TUNER_PHILIPS_FM1216ME_MK3:
- case TUNER_PHILIPS_FM1236_MK3:
+ case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FM1256_IH3:
stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
break;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff