mxc nand: remove debug param

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 325645c..f981a1f 100644 (file)
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -165,7 +165,7 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
  * complete by checking the INT bit of config2 register.
  */
 static void wait_op_done(struct mxc_nand_host *host, int max_retries,
-                               uint16_t param, int useirq)
+                               int useirq)
 {
        uint32_t tmp;
 
@@ -194,8 +194,8 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
                        udelay(1);
                }
                if (max_retries < 0)
-                       DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
-                             __func__, param);
+                       DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n",
+                             __func__);
        }
 }
 
@@ -209,7 +209,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
        writew(NFC_CMD, host->regs + NFC_CONFIG2);
 
        /* Wait for operation to complete */
-       wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+       wait_op_done(host, TROP_US_DELAY, useirq);
 }
 
 /* This function sends an address (or partial address) to the
@@ -223,7 +223,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast)
        writew(NFC_ADDR, host->regs + NFC_CONFIG2);
 
        /* Wait for operation to complete */
-       wait_op_done(host, TROP_US_DELAY, addr, islast);
+       wait_op_done(host, TROP_US_DELAY, islast);
 }
 
 static void send_page(struct mxc_nand_host *host, uint8_t buf_id,
@@ -247,7 +247,7 @@ static void send_page(struct mxc_nand_host *host, uint8_t buf_id,
        writew(ops, host->regs + NFC_CONFIG2);
 
        /* Wait for operation to complete */
-       wait_op_done(host, TROP_US_DELAY, spare_only, true);
+       wait_op_done(host, TROP_US_DELAY, true);
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
@@ -267,7 +267,7 @@ static void send_read_id(struct mxc_nand_host *host)
        writew(NFC_ID, host->regs + NFC_CONFIG2);
 
        /* Wait for operation to complete */
-       wait_op_done(host, TROP_US_DELAY, 0, true);
+       wait_op_done(host, TROP_US_DELAY, true);
 
        if (this->options & NAND_BUSWIDTH_16) {
                void __iomem *main_buf = host->regs + MAIN_AREA0;
@@ -303,7 +303,7 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
        writew(NFC_STATUS, host->regs + NFC_CONFIG2);
 
        /* Wait for operation to complete */
-       wait_op_done(host, TROP_US_DELAY, 0, true);
+       wait_op_done(host, TROP_US_DELAY, true);
 
        /* Status is placed in first word of main buffer */
        /* get status, then recovery area 1 data */