igb: Correctly determine pci-e function number in virtual environment

When running in a virtual environment the ports of an 82575/6 can appear to
be single function devices which is not correct.  To resolve this we rely
on the function number stored in the status register.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index e18747c..137269d 100644 (file)
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -83,8 +83,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
 {
        struct e1000_bus_info *bus = &hw->bus;
        s32 ret_val;
-       u32 status;
-       u16 pcie_link_status, pci_header_type;
+       u32 reg;
+       u16 pcie_link_status;
 
        bus->type = e1000_bus_type_pci_express;
        bus->speed = e1000_bus_speed_2500;
@@ -99,14 +99,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
                                                     PCIE_LINK_WIDTH_MASK) >>
                                                     PCIE_LINK_WIDTH_SHIFT);
 
-       igb_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type);
-       if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) {
-               status = rd32(E1000_STATUS);
-               bus->func = (status & E1000_STATUS_FUNC_MASK)
-                           >> E1000_STATUS_FUNC_SHIFT;
-       } else {
-               bus->func = 0;
-       }
+       reg = rd32(E1000_STATUS);
+       bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
 
        return 0;
 }
@@ -229,8 +223,8 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
        if (!hw->mac.disable_av)
                rar_high |= E1000_RAH_AV;
 
-       array_wr32(E1000_RA, (index << 1), rar_low);
-       array_wr32(E1000_RA, ((index << 1) + 1), rar_high);
+       wr32(E1000_RAL(index), rar_low);
+       wr32(E1000_RAH(index), rar_high);
 }
 
 /**

diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 95523af..bdf5d83 100644 (file)
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -221,6 +221,10 @@
 #define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
 #define E1000_RA       0x05400  /* Receive Address - RW Array */
 #define E1000_RA2      0x054E0  /* 2nd half of receive address array - RW Array */
+#define E1000_RAL(_i)  (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+                                       (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i)  (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+                                       (0x054E4 + ((_i - 16) * 8)))
 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
 #define E1000_VMD_CTL  0x0581C  /* VMDq Control - RW */
 #define E1000_WUC      0x05800  /* Wakeup Control - RW */

diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index d5efbcc..3c831f1 100644 (file)
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -494,8 +494,6 @@ static void igb_get_regs(struct net_device *netdev,
 
        /* These should probably be added to e1000_regs.h instead */
        #define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4))
-       #define E1000_RAL(_i)         (0x05400 + ((_i) * 8))
-       #define E1000_RAH(_i)         (0x05404 + ((_i) * 8))
        #define E1000_IP4AT_REG(_i)   (0x05840 + ((_i) * 8))
        #define E1000_IP6AT_REG(_i)   (0x05880 + ((_i) * 4))
        #define E1000_WUPM_REG(_i)    (0x05A00 + ((_i) * 4))