V4L/DVB (5314): Added support for tda827x tuners with preamlifiers
authorHartmut Hackmann <hartmut.hackmann@t-online.de>
Fri, 27 Apr 2007 15:31:12 +0000 (12:31 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Fri, 27 Apr 2007 18:43:32 +0000 (15:43 -0300)
This patch contains
- new tuning code for the tda827xa silicon tuner.
- controls the preamplifier of some boards with this tuner.
- support for the Philips Tiger S hybrid DVB-T reference design.
- reworked the saa7134-dvb modulue to get rid of most of the
  small board specific functions.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Documentation/video4linux/CARDLIST.saa7134
drivers/media/video/saa7134/saa7134-cards.c
drivers/media/video/saa7134/saa7134-core.c
drivers/media/video/saa7134/saa7134-dvb.c
drivers/media/video/saa7134/saa7134-video.c
drivers/media/video/saa7134/saa7134.h
drivers/media/video/tda8290.c

index a12246a..f18533f 100644 (file)
 106 -> Encore ENLTV                             [1131:2342,1131:2341,3016:2344]
 107 -> Encore ENLTV-FM                          [1131:230f]
 108 -> Terratec Cinergy HT PCI                  [153b:1175]
+109 -> Philips Tiger - S Reference design
index 4399d13..782832e 100644 (file)
@@ -2543,10 +2543,10 @@ struct saa7134_board saa7134_boards[] = {
                .name           = "Philips Tiger reference design",
                .audio_clock    = 0x00187de7,
                .tuner_type     = TUNER_PHILIPS_TDA8290,
-               .tuner_config   = 0,
                .radio_type     = UNSET,
                .tuner_addr     = ADDR_UNSET,
                .radio_addr     = ADDR_UNSET,
+               .tuner_config   = 0,
                .mpeg           = SAA7134_MPEG_DVB,
                .gpiomask       = 0x0200000,
                .inputs = {{
@@ -2625,7 +2625,7 @@ struct saa7134_board saa7134_boards[] = {
                }},
                .radio = {
                        .name   = name_radio,
-                       .amux   = LINE1,
+                       .amux   = TV,
                        .gpio   = 0x0200000,
                },
        },
@@ -3044,6 +3044,7 @@ struct saa7134_board saa7134_boards[] = {
                .radio_type     = UNSET,
                .tuner_addr     = ADDR_UNSET,
                .radio_addr     = ADDR_UNSET,
+               .tuner_config   = 1,
                .mpeg           = SAA7134_MPEG_DVB,
                .gpiomask       = 0x000200000,
                .inputs         = {{
@@ -3290,6 +3291,36 @@ struct saa7134_board saa7134_boards[] = {
                        .amux   = LINE1,
                }},
        },
+       [SAA7134_BOARD_PHILIPS_TIGER_S] = {
+               .name           = "Philips Tiger - S Reference design",
+               .audio_clock    = 0x00187de7,
+               .tuner_type     = TUNER_PHILIPS_TDA8290,
+               .radio_type     = UNSET,
+               .tuner_addr     = ADDR_UNSET,
+               .radio_addr     = ADDR_UNSET,
+               .tuner_config   = 2,
+               .mpeg           = SAA7134_MPEG_DVB,
+               .gpiomask       = 0x0200000,
+               .inputs = {{
+                       .name   = name_tv,
+                       .vmux   = 1,
+                       .amux   = TV,
+                       .tv     = 1,
+               },{
+                       .name   = name_comp1,
+                       .vmux   = 3,
+                       .amux   = LINE1,
+               },{
+                       .name   = name_svideo,
+                       .vmux   = 8,
+                       .amux   = LINE1,
+               }},
+               .radio = {
+                       .name   = name_radio,
+                       .amux   = TV,
+                       .gpio   = 0x0200000,
+               },
+       },
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -4104,8 +4135,8 @@ int saa7134_board_init1(struct saa7134_dev *dev)
                break;
        case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
        case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
-               saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
-               saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
+               saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x08000000, 0x08000000);
+               saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000);
                break;
        case SAA7134_BOARD_AVERMEDIA_CARDBUS:
                /* power-up tuner chip */
@@ -4168,6 +4199,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                                tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
                                tun_setup.type = dev->tuner_type;
                                tun_setup.addr = ADDR_UNSET;
+                               tun_setup.config = 0;
+                               tun_setup.gpio_func = NULL;
 
                                saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR, &tun_setup);
                }
@@ -4235,6 +4268,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
                tun_setup.type = dev->tuner_type;
                tun_setup.addr = ADDR_UNSET;
+               tun_setup.config = 0;
+               tun_setup.gpio_func = NULL;
 
                saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
                }
@@ -4254,11 +4289,36 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
                tun_setup.type = dev->tuner_type;
                tun_setup.addr = dev->tuner_addr;
+               tun_setup.config = 0;
+               tun_setup.gpio_func = NULL;
 
                saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
                }
                break;
        case SAA7134_BOARD_PHILIPS_TIGER:
+       case SAA7134_BOARD_PHILIPS_TIGER_S:
+               {
+               u8 data[] = { 0x3c, 0x33, 0x60};
+               struct tuner_setup tun_setup;
+               struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+               if(dev->autodetected && (dev->eedata[0x49] == 0x50)) {
+                       dev->board = SAA7134_BOARD_PHILIPS_TIGER_S;
+                       printk(KERN_INFO "%s: Reconfigured board as %s\n",
+                               dev->name, saa7134_boards[dev->board].name);
+               }
+               if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
+                       tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+                       tun_setup.type = TUNER_PHILIPS_TDA8290;
+                       tun_setup.addr = 0x4b;
+                       tun_setup.config = 2;
+                       tun_setup.gpio_func = (tuner_gpio_func_t) saa7134_set_gpio;
+
+                       saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
+                       data[2] = 0x68;
+               }
+               i2c_transfer(&dev->i2c_adap, &msg, 1);
+               }
+               break;
        case SAA7134_BOARD_PINNACLE_PCTV_310i:
        case SAA7134_BOARD_TEVION_DVBT_220RF:
        case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
@@ -4268,7 +4328,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                 * and configure firmware eeprom address
                 */
                {
-               u8 data[] = { 0x3c, 0x33, 0x68};
+               u8 data[] = { 0x3c, 0x33, 0x60};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
                }
@@ -4282,18 +4342,18 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                break;
        case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
        case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
-               /* make the tda10046 find its eeprom */
+               /* initialize analog mode  */
                {
-               u8 data[] = { 0x3c, 0x33, 0x62};
+               u8 data[] = { 0x3c, 0x33, 0x6a};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
                }
                break;
        case SAA7134_BOARD_CINERGY_HT_PCMCIA:
        case SAA7134_BOARD_CINERGY_HT_PCI:
-               /* make the tda10046 find its eeprom */
+               /* initialize analog mode */
                {
-               u8 data[] = { 0x3c, 0x33, 0x60};
+               u8 data[] = { 0x3c, 0x33, 0x68};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
                }
index 2e0518b..8ed03d6 100644 (file)
@@ -1205,6 +1205,7 @@ module_exit(saa7134_fini);
 
 /* ----------------------------------------------------------- */
 
+EXPORT_SYMBOL(saa7134_set_gpio);
 EXPORT_SYMBOL(saa7134_i2c_call_clients);
 EXPORT_SYMBOL(saa7134_devlist);
 EXPORT_SYMBOL(saa7134_boards);
index 6d148a7..61a68c6 100644 (file)
@@ -54,7 +54,17 @@ static int use_frontend = 0;
 module_param(use_frontend, int, 0644);
 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
 
-/* ------------------------------------------------------------------ */
+static int debug = 0;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
+
+#define dprintk(fmt, arg...)   if (debug) \
+       printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg)
+
+/* ------------------------------------------------------------------
+ * mt352 based DVB-T cards
+ */
+
 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
 {
        u32 ok;
@@ -185,10 +195,35 @@ static struct mt352_config avermedia_777 = {
        .demod_init    = mt352_aver777_init,
 };
 
-/* ------------------------------------------------------------------ */
-static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+/* ==================================================================
+ * tda1004x based DVB-T cards, helper functions
+ */
+
+static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
+                                          const struct firmware **fw, char *name)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       return request_firmware(fw, name, &dev->pci->dev);
+}
+
+static void philips_tda1004x_set_board_name(struct dvb_frontend *fe, char *name)
+{
+       size_t len;
+
+       len = sizeof(fe->ops.info.name);
+       strncpy(fe->ops.info.name, name, len);
+       fe->ops.info.name[len - 1] = 0;
+}
+
+/* ------------------------------------------------------------------
+ * these tuners are tu1216, td1316(a)
+ */
+
+static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+       struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        u8 tuner_buf[4];
        struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
                        sizeof(tuner_buf) };
@@ -263,15 +298,19 @@ static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_
 
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
-       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
+       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
+               printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
                return -EIO;
+       }
        msleep(1);
        return 0;
 }
 
-static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe)
+static int philips_tu1216_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
        struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
 
@@ -287,46 +326,17 @@ static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe)
 
 /* ------------------------------------------------------------------ */
 
-static int philips_tu1216_tuner_60_init(struct dvb_frontend *fe)
-{
-       return philips_tda6651_pll_init(0x60, fe);
-}
-
-static int philips_tu1216_tuner_60_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-       return philips_tda6651_pll_set(0x60, fe, params);
-}
-
-static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
-                                          const struct firmware **fw, char *name)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       return request_firmware(fw, name, &dev->pci->dev);
-}
-
 static struct tda1004x_config philips_tu1216_60_config = {
-
        .demod_address = 0x8,
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_4M,
        .agc_config    = TDA10046_AGC_DEFAULT,
        .if_freq       = TDA10046_FREQ_3617,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x60,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
-static int philips_tu1216_tuner_61_init(struct dvb_frontend *fe)
-{
-       return philips_tda6651_pll_init(0x61, fe);
-}
-
-static int philips_tu1216_tuner_61_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-       return philips_tda6651_pll_set(0x61, fe, params);
-}
-
 static struct tda1004x_config philips_tu1216_61_config = {
 
        .demod_address = 0x8,
@@ -335,7 +345,8 @@ static struct tda1004x_config philips_tu1216_61_config = {
        .xtal_freq     = TDA10046_XTAL_4M,
        .agc_config    = TDA10046_AGC_DEFAULT,
        .if_freq       = TDA10046_FREQ_3617,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x61,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
 /* ------------------------------------------------------------------ */
@@ -343,24 +354,42 @@ static struct tda1004x_config philips_tu1216_61_config = {
 static int philips_td1316_tuner_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
-       struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
+       struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
 
        /* setup PLL configuration */
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
                return -EIO;
-       if (fe->ops.i2c_gate_ctrl)
-               fe->ops.i2c_gate_ctrl(fe, 0);
        return 0;
 }
 
 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
-       return philips_tda6651_pll_set(0x61, fe, params);
+       return philips_tda6651_pll_set(fe, params);
+}
+
+static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
+{
+       struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
+       static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
+       struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
+
+       /* switch the tuner to analog mode */
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
+               return -EIO;
+       return 0;
 }
 
+/* ------------------------------------------------------------------ */
+
 static int philips_europa_tuner_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
@@ -380,18 +409,14 @@ static int philips_europa_tuner_init(struct dvb_frontend *fe)
 static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
-       /* this message actually turns the tuner back to analog mode */
-       static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
-       struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
 
-       i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
-       msleep(1);
+       static u8 msg[] = { 0x00, 0x14 };
+       struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
+
+       if (philips_td1316_tuner_sleep(fe))
+               return -EIO;
 
        /* switch the board to analog mode */
-       analog_msg.addr = 0x43;
-       analog_msg.len  = 0x02;
-       msg[0] = 0x00;
-       msg[1] = 0x14;
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
@@ -416,7 +441,8 @@ static struct tda1004x_config philips_europa_config = {
        .xtal_freq     = TDA10046_XTAL_4M,
        .agc_config    = TDA10046_AGC_IFO_AUTO_POS,
        .if_freq       = TDA10046_FREQ_052,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x61,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
 /* ------------------------------------------------------------------ */
@@ -424,9 +450,11 @@ static struct tda1004x_config philips_europa_config = {
 static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        /* this message is to set up ATC and ALC */
        static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
-       struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
 
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
@@ -440,9 +468,11 @@ static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
 static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        /* this message actually turns the tuner back to analog mode */
        static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
-       struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
 
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
@@ -460,8 +490,10 @@ static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
 static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        u8 tuner_buf[4];
-       struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len =
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
                        sizeof(tuner_buf) };
        int tuner_frequency = 0;
        int divider = 0;
@@ -536,8 +568,10 @@ static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_
 
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
-       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
+       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
+               printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
                return -EIO;
+       }
        return 0;
 }
 
@@ -548,9 +582,76 @@ static struct tda1004x_config medion_cardbus = {
        .xtal_freq     = TDA10046_XTAL_16M,
        .agc_config    = TDA10046_AGC_IFO_AUTO_NEG,
        .if_freq       = TDA10046_FREQ_3613,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x61,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
+/* ------------------------------------------------------------------
+ * tda 1004x based cards with philips silicon tuner
+ */
+
+static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high)
+{
+       struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->i2c_gate;
+       u8 config = state->config->tuner_config;
+       u8 GP00_CF[] = {0x20, 0x01};
+       u8 GP00_LEV[] = {0x22, 0x00};
+
+       struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2};
+       if (config) {
+               if (high) {
+                       dprintk("setting LNA to high gain\n");
+               } else {
+                       dprintk("setting LNA to low gain\n");
+               }
+       }
+       switch (config) {
+       case 0: /* no LNA */
+               break;
+       case 1: /* switch is GPIO 0 of tda8290 */
+       case 2:
+               /* turn Vsync off */
+               saa7134_set_gpio(dev, 22, 0);
+               GP00_LEV[1] = high ? 0 : 1;
+               if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+                       printk("%s/dvb: could not access tda8290 at addr: 0x%02x\n",dev->name, addr << 1);
+                       return;
+               }
+               msg.buf = GP00_LEV;
+               if (config == 2)
+                       GP00_LEV[1] = high ? 1 : 0;
+               i2c_transfer(&dev->i2c_adap, &msg, 1);
+               break;
+       case 3: /* switch with GPIO of saa713x */
+               saa7134_set_gpio(dev, 22, high);
+               break;
+       }
+}
+
+static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
+{
+       struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+
+       u8 addr = state->config->i2c_gate;
+       static u8 tda8290_close[] = { 0x21, 0xc0};
+       static u8 tda8290_open[]  = { 0x21, 0x80};
+       struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
+       if (enable) {
+               tda8290_msg.buf = tda8290_close;
+       } else {
+               tda8290_msg.buf = tda8290_open;
+       }
+       if (i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1) != 1) {
+               printk("%s/dvb: could not access tda8290 I2C gate\n",dev->name);
+               return -EIO;
+       }
+       msleep(20);
+       return 0;
+}
+
 /* ------------------------------------------------------------------ */
 
 struct tda827x_data {
@@ -595,17 +696,14 @@ static struct tda827x_data tda827x_dvbt[] = {
        { .lomax =         0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
 };
 
-static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
-{
-       return 0;
-}
-
-static int philips_tda827x_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tda827xo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        u8 tuner_buf[14];
 
-       struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,
                                        .len = sizeof(tuner_buf) };
        int i, tuner_freq, if_freq;
        u32 N;
@@ -649,9 +747,10 @@ static int philips_tda827x_tuner_set_params(struct dvb_frontend *fe, struct dvb_
        tuner_msg.len = 14;
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
-       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
+       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
+               printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
                return -EIO;
-
+       }
        msleep(500);
        /* correct CP value */
        tuner_buf[0] = 0x30;
@@ -664,11 +763,13 @@ static int philips_tda827x_tuner_set_params(struct dvb_frontend *fe, struct dvb_
        return 0;
 }
 
-static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
+static int philips_tda827xo_tuner_sleep(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        static u8 tda827x_sleep[] = { 0x30, 0xd0};
-       struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep,
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827x_sleep,
                                    .len = sizeof(tda827x_sleep) };
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
@@ -676,17 +777,6 @@ static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
        return 0;
 }
 
-static struct tda1004x_config tda827x_lifeview_config = {
-       .demod_address = 0x08,
-       .invert        = 1,
-       .invert_oclk   = 0,
-       .xtal_freq     = TDA10046_XTAL_16M,
-       .agc_config    = TDA10046_AGC_TDA827X,
-       .gpio_config   = TDA10046_GP11_I,
-       .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
-};
-
 /* ------------------------------------------------------------------ */
 
 struct tda827xa_data {
@@ -727,17 +817,20 @@ static struct tda827xa_data tda827xa_dvbt[] = {
        { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0},
        { .lomax =         0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}};
 
-
-static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tda827xa_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
-       u8 tuner_buf[14];
-       unsigned char reg2[2];
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
+       u8 tuner_buf[10];
 
        struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = tuner_buf};
        int i, tuner_freq, if_freq;
        u32 N;
 
+       philips_tda827x_lna_gain( fe, 1);
+       msleep(20);
+
        switch (params->u.ofdm.bandwidth) {
        case BANDWIDTH_6_MHZ:
                if_freq = 4000000;
@@ -767,45 +860,82 @@ static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb
        tuner_buf[5] = (tda827xa_dvbt[i].spd << 5) + (tda827xa_dvbt[i].svco << 3) +
                        tda827xa_dvbt[i].sbs;
        tuner_buf[6] = 0x4b + (tda827xa_dvbt[i].gc3 << 4);
-       tuner_buf[7] = 0x0c;
+       tuner_buf[7] = 0x1c;
        tuner_buf[8] = 0x06;
        tuner_buf[9] = 0x24;
-       tuner_buf[10] = 0xff;
-       tuner_buf[11] = 0x60;
-       tuner_buf[12] = 0x00;
-       tuner_buf[13] = 0x39;  // lpsel
-       msg.len = 14;
+       tuner_buf[10] = 0x00;
+       msg.len = 11;
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
-       if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+       if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+               printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
                return -EIO;
+       }
+       tuner_buf[0] = 0x90;
+       tuner_buf[1] = 0xff;
+       tuner_buf[2] = 0x60;
+       tuner_buf[3] = 0x00;
+       tuner_buf[4] = 0x59;  // lpsel, for 6MHz + 2
+       msg.len = 5;
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       i2c_transfer(&dev->i2c_adap, &msg, 1);
 
-       msg.buf= reg2;
+       tuner_buf[0] = 0xa0;
+       tuner_buf[1] = 0x40;
        msg.len = 2;
-       reg2[0] = 0x60;
-       reg2[1] = 0x3c;
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        i2c_transfer(&dev->i2c_adap, &msg, 1);
 
-       reg2[0] = 0xa0;
-       reg2[1] = 0x40;
+       msleep(11);
+       msg.flags = I2C_M_RD;
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       i2c_transfer(&dev->i2c_adap, &msg, 1);
+       msg.flags = 0;
+
+       tuner_buf[1] >>= 4;
+       dprintk("tda8275a AGC2 gain is: %d\n", tuner_buf[1]);
+       if ((tuner_buf[1]) < 2) {
+               philips_tda827x_lna_gain(fe, 0);
+               tuner_buf[0] = 0x60;
+               tuner_buf[1] = 0x0c;
+               if (fe->ops.i2c_gate_ctrl)
+                       fe->ops.i2c_gate_ctrl(fe, 1);
+               i2c_transfer(&dev->i2c_adap, &msg, 1);
+       }
+
+       tuner_buf[0] = 0xc0;
+       tuner_buf[1] = 0x99;    // lpsel, for 6MHz + 2
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+       tuner_buf[0] = 0x60;
+       tuner_buf[1] = 0x3c;
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        i2c_transfer(&dev->i2c_adap, &msg, 1);
 
-       msleep(2);
        /* correct CP value */
-       reg2[0] = 0x30;
-       reg2[1] = 0x10 + tda827xa_dvbt[i].scr;
-       msg.len = 2;
+       tuner_buf[0] = 0x30;
+       tuner_buf[1] = 0x10 + tda827xa_dvbt[i].scr;
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+       msleep(163);
+       tuner_buf[0] = 0xc0;
+       tuner_buf[1] = 0x39;  // lpsel, for 6MHz + 2
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        i2c_transfer(&dev->i2c_adap, &msg, 1);
 
-       msleep(550);
-       reg2[0] = 0x50;
-       reg2[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4);
+       msleep(3);
+       /* freeze AGC1 */
+       tuner_buf[0] = 0x50;
+       tuner_buf[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4);
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
        i2c_transfer(&dev->i2c_adap, &msg, 1);
@@ -814,9 +944,11 @@ static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb
 
 }
 
-static int philips_tda827xa_tuner_sleep(u8 addr, struct dvb_frontend *fe)
+static int philips_tda827xa_tuner_sleep(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
        static u8 tda827xa_sleep[] = { 0x30, 0x90};
        struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827xa_sleep,
                                    .len = sizeof(tda827xa_sleep) };
@@ -828,60 +960,98 @@ static int philips_tda827xa_tuner_sleep(u8 addr, struct dvb_frontend *fe)
        return 0;
 }
 
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------
+ * upper layer: distinguish the silicon tuner versions
+ */
 
-static int tda8290_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
+static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 tda8290_close[] = { 0x21, 0xc0};
-       static u8 tda8290_open[]  = { 0x21, 0x80};
-       struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
-       if (enable) {
-               tda8290_msg.buf = tda8290_close;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       u8 addr = state->config->tuner_address;
+       u8 data;
+       struct i2c_msg tuner_msg = {.addr = addr,.flags = I2C_M_RD,.buf = &data, .len = 1};
+       state->conf_probed = 0;
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
+               printk("%s/dvb: could not read from tuner at addr: 0x%02x\n",dev->name, addr << 1);
+               return -EIO;
+       }
+       if ((data & 0x3c) == 0) {
+               dprintk("tda827x tuner found\n");
+               state->conf_probed = 1;
        } else {
-               tda8290_msg.buf = tda8290_open;
+               dprintk("tda827xa tuner found\n");
+               state->conf_probed = 2;
+       }
+       switch (state->config->antenna_switch) {
+       case 0: break;
+       case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
+               saa7134_set_gpio(dev, 21, 0);
+               break;
+       case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
+               saa7134_set_gpio(dev, 21, 1);
+               break;
        }
-       if (i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1) != 1)
-               return -EIO;
-       msleep(20);
        return 0;
 }
 
-/* ------------------------------------------------------------------ */
-
-static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
 {
-       int ret;
-
-       ret = philips_tda827xa_pll_set(0x61, fe, params);
-       if (ret != 0)
-               return ret;
+       struct saa7134_dev *dev = fe->dvb->priv;
+       struct tda1004x_state *state = fe->demodulator_priv;
+       switch (state->conf_probed) {
+       case 1: philips_tda827xo_tuner_sleep(fe);
+               break;
+       case 2: philips_tda827xa_tuner_sleep(fe);
+               break;
+       default: dprintk("Huh? unknown tda827x version!\n");
+               return -EIO;
+       }
+       switch (state->config->antenna_switch) {
+       case 0: break;
+       case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
+               saa7134_set_gpio(dev, 21, 1);
+               break;
+       case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
+               saa7134_set_gpio(dev, 21, 0);
+               break;
+       }
        return 0;
 }
 
-static int philips_tiger_tuner_init(struct dvb_frontend *fe)
+static int philips_tda827x_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x6a};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+       struct tda1004x_state *state = fe->demodulator_priv;
+       switch (state->conf_probed) {
+       case 1: philips_tda827xo_pll_set(fe, params);
+               break;
+       case 2: philips_tda827xa_pll_set(fe, params);
+               break;
+       default: dprintk("Huh? unknown tda827x version!\n");
                return -EIO;
+       }
        return 0;
 }
 
-static int philips_tiger_tuner_sleep(struct dvb_frontend *fe)
+static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf,
+                                char *board_name)
 {
-       struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x68};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       i2c_transfer(&dev->i2c_adap, &msg, 1);
-       philips_tda827xa_tuner_sleep( 0x61, fe);
-       return 0;
+       dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap);
+       if (dev->dvb.frontend) {
+               if (tda_conf->i2c_gate)
+                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+               dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
+               dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
+               dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_pll_set;
+       }
+       philips_tda1004x_set_board_name(dev->dvb.frontend, board_name);
 }
 
-static struct tda1004x_config philips_tiger_config = {
+/* ------------------------------------------------------------------ */
+static struct tda1004x_config tda827x_lifeview_config = {
        .demod_address = 0x08,
        .invert        = 1,
        .invert_oclk   = 0,
@@ -889,31 +1059,24 @@ static struct tda1004x_config philips_tiger_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x60,
+       .request_firmware = philips_tda1004x_request_firmware
 };
-/* ------------------------------------------------------------------ */
-
-static int cinergy_ht_tuner_init(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x62};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
-               return -EIO;
-       return 0;
-}
-
-static int cinergy_ht_tuner_sleep(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x60};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
 
-       i2c_transfer(&dev->i2c_adap, &msg, 1);
-       philips_tda827xa_tuner_sleep( 0x61, fe);
-       return 0;
-}
+static struct tda1004x_config philips_tiger_config = {
+       .demod_address = 0x08,
+       .invert        = 1,
+       .invert_oclk   = 0,
+       .xtal_freq     = TDA10046_XTAL_16M,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP11_I,
+       .if_freq       = TDA10046_FREQ_045,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .tuner_config  = 0,
+       .antenna_switch= 1,
+       .request_firmware = philips_tda1004x_request_firmware
+};
 
 static struct tda1004x_config cinergy_ht_config = {
        .demod_address = 0x08,
@@ -923,10 +1086,40 @@ static struct tda1004x_config cinergy_ht_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP01_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .tuner_config  = 0,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
+static struct tda1004x_config cinergy_ht_pci_config = {
+       .demod_address = 0x08,
+       .invert        = 1,
+       .invert_oclk   = 0,
+       .xtal_freq     = TDA10046_XTAL_16M,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP01_I,
+       .if_freq       = TDA10046_FREQ_045,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x60,
+       .tuner_config  = 0,
+       .request_firmware = philips_tda1004x_request_firmware
+};
+
+static struct tda1004x_config philips_tiger_s_config = {
+       .demod_address = 0x08,
+       .invert        = 1,
+       .invert_oclk   = 0,
+       .xtal_freq     = TDA10046_XTAL_16M,
+       .agc_config    = TDA10046_AGC_TDA827X,
+       .gpio_config   = TDA10046_GP01_I,
+       .if_freq       = TDA10046_FREQ_045,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .tuner_config  = 2,
+       .antenna_switch= 1,
+       .request_firmware = philips_tda1004x_request_firmware
+};
 
 static struct tda1004x_config pinnacle_pctv_310i_config = {
        .demod_address = 0x08,
@@ -936,11 +1129,12 @@ static struct tda1004x_config pinnacle_pctv_310i_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .tuner_config  = 1,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
 static struct tda1004x_config hauppauge_hvr_1110_config = {
        .demod_address = 0x08,
        .invert        = 1,
@@ -949,11 +1143,11 @@ static struct tda1004x_config hauppauge_hvr_1110_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
 static struct tda1004x_config asus_p7131_dual_config = {
        .demod_address = 0x08,
        .invert        = 1,
@@ -962,51 +1156,13 @@ static struct tda1004x_config asus_p7131_dual_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x61,
+       .tuner_config  = 0,
+       .antenna_switch= 2,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-static int asus_p7131_dual_tuner_init(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x6a};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
-               return -EIO;
-       /* make sure the DVB-T antenna input is set */
-       saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0200000);
-       return 0;
-}
-
-static int asus_p7131_dual_tuner_sleep(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x68};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       i2c_transfer(&dev->i2c_adap, &msg, 1);
-       philips_tda827xa_tuner_sleep( 0x61, fe);
-       /* reset antenna inputs for analog usage */
-       saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0200000);
-       return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int lifeview_trio_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-       int ret;
-
-       ret = philips_tda827xa_pll_set(0x60, fe, params);
-       return ret;
-}
-
-static int lifeview_trio_tuner_sleep(struct dvb_frontend *fe)
-{
-       philips_tda827xa_tuner_sleep(0x60, fe);
-       return 0;
-}
-
 static struct tda1004x_config lifeview_trio_config = {
        .demod_address = 0x09,
        .invert        = 1,
@@ -1015,125 +1171,82 @@ static struct tda1004x_config lifeview_trio_config = {
        .agc_config    = TDA10046_AGC_TDA827X,
        .gpio_config   = TDA10046_GP00_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x60,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
-static int ads_duo_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-       int ret;
-
-       ret = philips_tda827xa_pll_set(0x61, fe, params);
-       return ret;
-}
-
-static int ads_duo_tuner_init(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       /* route TDA8275a AGC input to the channel decoder */
-       saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60);
-       return 0;
-}
-
-static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
-{
-       struct saa7134_dev *dev = fe->dvb->priv;
-       /* route TDA8275a AGC input to the analog IF chip*/
-       saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20);
-       philips_tda827xa_tuner_sleep( 0x61, fe);
-       return 0;
-}
-
-static struct tda1004x_config ads_tech_duo_config = {
+static struct tda1004x_config tevion_dvbt220rf_config = {
        .demod_address = 0x08,
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
        .agc_config    = TDA10046_AGC_TDA827X,
-       .gpio_config   = TDA10046_GP00_I,
+       .gpio_config   = TDA10046_GP11_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x60,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
-static int tevion_dvb220rf_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-       int ret;
-       ret = philips_tda827xa_pll_set(0x60, fe, params);
-       return ret;
-}
-
-static int tevion_dvb220rf_tuner_sleep(struct dvb_frontend *fe)
-{
-       philips_tda827xa_tuner_sleep( 0x61, fe);
-       return 0;
-}
-
-static struct tda1004x_config tevion_dvbt220rf_config = {
+static struct tda1004x_config md8800_dvbt_config = {
        .demod_address = 0x08,
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
        .agc_config    = TDA10046_AGC_TDA827X,
-       .gpio_config   = TDA10046_GP11_I,
+       .gpio_config   = TDA10046_GP01_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .i2c_gate      = 0x4b,
+       .tuner_address = 0x60,
+       .tuner_config  = 0,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
+/* ------------------------------------------------------------------
+ * special case: this card uses saa713x GPIO22 for the mode switch
+ */
 
-static int md8800_dvbt_analog_mode(struct dvb_frontend *fe)
+static int ads_duo_tuner_init(struct dvb_frontend *fe)
 {
        struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 data[] = { 0x3c, 0x33, 0x68};
-       struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
-       i2c_transfer(&dev->i2c_adap, &msg, 1);
-       philips_tda827xa_tuner_sleep( 0x61, fe);
+       philips_tda827x_tuner_init(fe);
+       /* route TDA8275a AGC input to the channel decoder */
+       saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0400000);
        return 0;
 }
 
-static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
 {
-       int ret;
        struct saa7134_dev *dev = fe->dvb->priv;
-       static u8 tda8290_close[] = { 0x21, 0xc0};
-       static u8 tda8290_open[]  = { 0x21, 0x80};
-       struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
-       /* close tda8290 i2c bridge */
-       tda8290_msg.buf = tda8290_close;
-       ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
-       if (ret != 1)
-               return -EIO;
-       msleep(20);
-       ret = philips_tda827xa_pll_set(0x60, fe, params);
-       if (ret != 0)
-               return ret;
-       /* open tda8290 i2c bridge */
-       tda8290_msg.buf = tda8290_open;
-       i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
-       return ret;
+       /* route TDA8275a AGC input to the analog IF chip*/
+       saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0400000);
+       philips_tda827x_tuner_sleep(fe);
+       return 0;
 }
 
-static struct tda1004x_config md8800_dvbt_config = {
+static struct tda1004x_config ads_tech_duo_config = {
        .demod_address = 0x08,
        .invert        = 1,
        .invert_oclk   = 0,
        .xtal_freq     = TDA10046_XTAL_16M,
        .agc_config    = TDA10046_AGC_TDA827X,
-       .gpio_config   = TDA10046_GP11_I,
+       .gpio_config   = TDA10046_GP00_I,
        .if_freq       = TDA10046_FREQ_045,
-       .request_firmware = philips_tda1004x_request_firmware,
+       .tuner_address = 0x61,
+       .request_firmware = philips_tda1004x_request_firmware
 };
 
+/* ==================================================================
+ * tda10086 based DVB-S cards, helper functions
+ */
+
 static struct tda10086_config flydvbs = {
        .demod_address = 0x0e,
        .invert = 0,
 };
 
-/* ------------------------------------------------------------------ */
+/* ==================================================================
+ * nxt200x based ATSC cards, helper functions
+ */
 
 static struct nxt200x_config avertvhda180 = {
        .demod_address    = 0x0a,
@@ -1153,10 +1266,13 @@ static struct nxt200x_config kworldatsc110 = {
        .set_pll_input    = nxt200x_set_pll_input,
 };
 
-/* ------------------------------------------------------------------ */
+/* ==================================================================
+ * Core code
+ */
 
 static int dvb_init(struct saa7134_dev *dev)
 {
+       char *board_name;
        /* init struct videobuf_dvb */
        dev->ts.nr_bufs    = 32;
        dev->ts.nr_packets = 32*4;
@@ -1194,6 +1310,7 @@ static int dvb_init(struct saa7134_dev *dev)
                        dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
                        dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
                        dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, "DVB-T Medion MD7134");
                }
                break;
        case SAA7134_BOARD_PHILIPS_TOUGH:
@@ -1201,42 +1318,16 @@ static int dvb_init(struct saa7134_dev *dev)
                                               &philips_tu1216_60_config,
                                               &dev->i2c_adap);
                if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_60_init;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_60_set_params;
+                       dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, "DVB-T Philips TOUGH");
                }
                break;
        case SAA7134_BOARD_FLYDVBTDUO:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &tda827x_lifeview_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
-               }
-               break;
        case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &tda827x_lifeview_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &tda827x_lifeview_config, "DVB-T Lifeview FlyDVB Duo");
                break;
        case SAA7134_BOARD_PHILIPS_EUROPA:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &philips_europa_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
-                       dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
-               }
-               break;
        case SAA7134_BOARD_VIDEOMATE_DVBT_300:
                dev->dvb.frontend = dvb_attach(tda10046_attach,
                                               &philips_europa_config,
@@ -1247,6 +1338,11 @@ static int dvb_init(struct saa7134_dev *dev)
                        dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
                        dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
                        dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+                       if (dev->board == SAA7134_BOARD_VIDEOMATE_DVBT_300)
+                               board_name = "DVB-T Compro VideoMate 300";
+                       else
+                               board_name = "DVB-T Philips Europa";
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, board_name);
                }
                break;
        case SAA7134_BOARD_VIDEOMATE_DVBT_200:
@@ -1254,74 +1350,29 @@ static int dvb_init(struct saa7134_dev *dev)
                                               &philips_tu1216_61_config,
                                               &dev->i2c_adap);
                if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_61_init;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_61_set_params;
+                       dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, "DVB-T Compro VideoMate 200");
                }
                break;
        case SAA7134_BOARD_PHILIPS_TIGER:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &philips_tiger_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &philips_tiger_config, "DVB-T Philips Tiger");
                break;
        case SAA7134_BOARD_PINNACLE_PCTV_310i:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &pinnacle_pctv_310i_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, "DVB-T Pinnacle PCTV 310i");
                break;
        case SAA7134_BOARD_HAUPPAUGE_HVR1110:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &hauppauge_hvr_1110_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, "DVB-T Hauppauge HVR 1110");
                break;
        case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &asus_p7131_dual_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = asus_p7131_dual_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = asus_p7131_dual_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &asus_p7131_dual_config, "DVB-T Asus P7137 Dual");
                break;
        case SAA7134_BOARD_FLYDVBT_LR301:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &tda827x_lifeview_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &tda827x_lifeview_config, "DVB-T Lifeview FlyDVBT LR301");
                break;
        case SAA7134_BOARD_FLYDVB_TRIO:
                if(! use_frontend) {    //terrestrial
-                       dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                                      &lifeview_trio_config,
-                                                      &dev->i2c_adap);
-                       if (dev->dvb.frontend) {
-                               dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
-                               dev->dvb.frontend->ops.tuner_ops.set_params =
-                                                               lifeview_trio_tuner_set_params;
-                       }
+                       configure_tda827x_fe(dev, &lifeview_trio_config, NULL);
                } else {              //satellite
                        dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
                        if (dev->dvb.frontend) {
@@ -1337,42 +1388,26 @@ static int dvb_init(struct saa7134_dev *dev)
                }
                break;
        case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+       case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
                dev->dvb.frontend = dvb_attach(tda10046_attach,
                                               &ads_tech_duo_config,
                                               &dev->i2c_adap);
                if (dev->dvb.frontend) {
                        dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
                        dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
+                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_pll_set;
+                       if (dev->board == SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331)
+                               board_name = "DVB-T ADS DUO Cardbus PTV331";
+                       else
+                               board_name = "DVB-T Lifeview FlyDVT Cardbus";
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, board_name);
                }
                break;
        case SAA7134_BOARD_TEVION_DVBT_220RF:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &tevion_dvbt220rf_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.sleep = tevion_dvb220rf_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = tevion_dvb220rf_tuner_set_params;
-               }
-               break;
-       case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &ads_tech_duo_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
-               }
+               configure_tda827x_fe(dev, &tevion_dvbt220rf_config, "DVB-T Tevion 220RF");
                break;
        case SAA7134_BOARD_MEDION_MD8800_QUADRO:
-               dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config,
-                                                   &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
-               }
+               configure_tda827x_fe(dev, &md8800_dvbt_config, "DVB-T Medion MD8800");
                break;
        case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
                dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
@@ -1413,6 +1448,7 @@ static int dvb_init(struct saa7134_dev *dev)
                        dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
                        dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
                        dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, "DVBT Asus Europa 2 Hybrid");
                }
                break;
        case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
@@ -1422,31 +1458,17 @@ static int dvb_init(struct saa7134_dev *dev)
                if (dev->dvb.frontend) {
                        dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
                        dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+                       philips_tda1004x_set_board_name(dev->dvb.frontend, "DVBT Compro Videomate 200a");
                }
                break;
        case SAA7134_BOARD_CINERGY_HT_PCMCIA:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &cinergy_ht_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
-
-               }
+               configure_tda827x_fe(dev, &cinergy_ht_config, "DVB-T Terratec Cinergy HT Cardbus");
                break;
        case SAA7134_BOARD_CINERGY_HT_PCI:
-               dev->dvb.frontend = dvb_attach(tda10046_attach,
-                                              &cinergy_ht_config,
-                                              &dev->i2c_adap);
-               if (dev->dvb.frontend) {
-                       dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-                       dev->dvb.frontend->ops.tuner_ops.init = cinergy_ht_tuner_init;
-                       dev->dvb.frontend->ops.tuner_ops.sleep = cinergy_ht_tuner_sleep;
-                       dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
-
-               }
+               configure_tda827x_fe(dev, &cinergy_ht_pci_config, "DVB-T Terratec Cinergy HT PCI");
+               break;
+       case SAA7134_BOARD_PHILIPS_TIGER_S:
+               configure_tda827x_fe(dev, &philips_tiger_s_config, "DVB-T Philips Tiger S");
                break;
        default:
                printk("%s: Huh? unknown DVB card?\n",dev->name);
index f2cb630..e1cb273 100644 (file)
@@ -603,7 +603,14 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
        saa_writeb(SAA7134_RAW_DATA_GAIN,         0x40);
        saa_writeb(SAA7134_RAW_DATA_OFFSET,       0x80);
 
-       saa7134_i2c_call_clients(dev,VIDIOC_S_STD,&norm->id);
+       /* only tell the tuner if this is a tv input */
+       if (card_in(dev,dev->ctl_input).tv) {
+               if ((card(dev).tuner_type == TUNER_PHILIPS_TDA8290)
+                               && ((card(dev).tuner_config == 1)
+                               ||  (card(dev).tuner_config == 2)))
+                       saa7134_set_gpio(dev, 22, 5);
+               saa7134_i2c_call_clients(dev,VIDIOC_S_STD,&norm->id);
+       }
 }
 
 static void video_mux(struct saa7134_dev *dev, int input)
index 303c080..b46265a 100644 (file)
@@ -231,6 +231,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_ENCORE_ENLTV         106
 #define SAA7134_BOARD_ENCORE_ENLTV_FM      107
 #define SAA7134_BOARD_CINERGY_HT_PCI       108
+#define SAA7134_BOARD_PHILIPS_TIGER_S      109
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8
index 027c8a0..e6c3e61 100644 (file)
@@ -192,14 +192,52 @@ static struct tda827xa_data tda827xa_analog[] = {
        { .lomax =     0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}   /* End */
 };
 
+static void tda827xa_lna_gain(struct i2c_client *c, int high)
+{
+       struct tuner *t = i2c_get_clientdata(c);
+       unsigned char buf[] = {0x22, 0x01};
+       int arg;
+       struct i2c_msg msg = {.addr = c->addr, .flags = 0, .buf = buf, .len = sizeof(buf)};
+       if (t->config) {
+               if (high)
+                       tuner_dbg("setting LNA to high gain\n");
+               else
+                       tuner_dbg("setting LNA to low gain\n");
+       }
+       switch (t->config) {
+       case 0: /* no LNA */
+               break;
+       case 1: /* switch is GPIO 0 of tda8290 */
+       case 2:
+               /* turn Vsync on */
+               if (t->std & V4L2_STD_MN)
+                       arg = 5;
+               else
+                       arg = 4;
+               if (t->gpio_func)
+                       t->gpio_func(c->adapter->algo_data, 22, 5);
+               buf[1] = high ? 0 : 1;
+               if (t->config == 2)
+                       buf[1] = high ? 1 : 0;
+               i2c_transfer(c->adapter, &msg, 1);
+               break;
+       case 3: /* switch with GPIO of saa713x */
+               if (t->gpio_func)
+                       t->gpio_func(c->adapter->algo_data, 22, high);
+               break;
+       }
+}
+
 static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
 {
-       unsigned char tuner_reg[14];
-       unsigned char reg2[2];
+       unsigned char tuner_reg[11];
        u32 N;
        int i;
        struct tuner *t = i2c_get_clientdata(c);
-       struct i2c_msg msg = {.addr = t->tda827x_addr, .flags = 0};
+       struct i2c_msg msg = {.addr = t->tda827x_addr, .flags = 0, .buf = tuner_reg};
+
+       tda827xa_lna_gain( c, 1);
+       msleep(10);
 
        if (t->mode == V4L2_TUNER_RADIO)
                freq = freq / 1000;
@@ -222,48 +260,58 @@ static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
        tuner_reg[5] = (tda827xa_analog[i].spd << 5) + (tda827xa_analog[i].svco << 3) +
                        tda827xa_analog[i].sbs;
        tuner_reg[6] = 0x8b + (tda827xa_analog[i].gc3 << 4);
-       tuner_reg[7] = 0x0c;
+       tuner_reg[7] = 0x1c;
        tuner_reg[8] = 4;
        tuner_reg[9] = 0x20;
-       tuner_reg[10] = 0xff;
-       tuner_reg[11] = 0xe0;
-       tuner_reg[12] = 0;
-       tuner_reg[13] = 0x39 + (t->tda827x_lpsel << 1);
+       tuner_reg[10] = 0x00;
+       msg.len = 11;
+       i2c_transfer(c->adapter, &msg, 1);
 
-       msg.buf = tuner_reg;
-       msg.len = 14;
+       tuner_reg[0] = 0x90;
+       tuner_reg[1] = 0xff;
+       tuner_reg[2] = 0xe0;
+       tuner_reg[3] = 0;
+       tuner_reg[4] = 0x99 + (t->tda827x_lpsel << 1);
+       msg.len = 5;
        i2c_transfer(c->adapter, &msg, 1);
 
-       msg.buf= reg2;
+       tuner_reg[0] = 0xa0;
+       tuner_reg[1] = 0xc0;
        msg.len = 2;
-       reg2[0] = 0x60;
-       reg2[1] = 0x3c;
        i2c_transfer(c->adapter, &msg, 1);
 
-       reg2[0] = 0xa0;
-       reg2[1] = 0xc0;
+       tuner_reg[0] = 0x30;
+       tuner_reg[1] = 0x10 + tda827xa_analog[i].scr;
        i2c_transfer(c->adapter, &msg, 1);
 
-       msleep(2);
-       reg2[0] = 0x30;
-       reg2[1] = 0x10 + tda827xa_analog[i].scr;
+       msg.flags = I2C_M_RD;
+       i2c_transfer(c->adapter, &msg, 1);
+       msg.flags = 0;
+       tuner_reg[1] >>= 4;
+       tuner_dbg("AGC2 gain is: %d\n", tuner_reg[1]);
+       if (tuner_reg[1] < 1)
+               tda827xa_lna_gain( c, 0);
+
+       msleep(100);
+       tuner_reg[0] = 0x60;
+       tuner_reg[1] = 0x3c;
        i2c_transfer(c->adapter, &msg, 1);
 
-       msleep(550);
-       reg2[0] = 0x50;
-       reg2[1] = 0x8f + (tda827xa_analog[i].gc3 << 4);
+       msleep(163);
+       tuner_reg[0] = 0x50;
+       tuner_reg[1] = 0x8f + (tda827xa_analog[i].gc3 << 4);
        i2c_transfer(c->adapter, &msg, 1);
 
-       reg2[0] = 0x80;
-       reg2[1] = 0x28;
+       tuner_reg[0] = 0x80;
+       tuner_reg[1] = 0x28;
        i2c_transfer(c->adapter, &msg, 1);
 
-       reg2[0] = 0xb0;
-       reg2[1] = 0x01;
+       tuner_reg[0] = 0xb0;
+       tuner_reg[1] = 0x01;
        i2c_transfer(c->adapter, &msg, 1);
 
-       reg2[0] = 0xc0;
-       reg2[1] = 0x19 + (t->tda827x_lpsel << 1);
+       tuner_reg[0] = 0xc0;
+       tuner_reg[1] = 0x19 + (t->tda827x_lpsel << 1);
        i2c_transfer(c->adapter, &msg, 1);
 }
 
@@ -319,7 +367,9 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
        unsigned char addr_pll_stat = 0x1b;
        unsigned char adc_sat, agc_stat,
                      pll_stat;
+       int i;
 
+       tuner_dbg("tda827xa config is 0x%02x\n", t->config);
        i2c_master_send(c, easy_mode, 2);
        i2c_master_send(c, agc_out_on, 2);
        i2c_master_send(c, soft_reset, 2);
@@ -340,17 +390,22 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq)
                tda827xa_tune(c, ifc, freq);
        else
                tda827x_tune(c, ifc, freq);
+       for (i = 0; i < 3; i++) {
+               i2c_master_send(c, &addr_pll_stat, 1);
+               i2c_master_recv(c, &pll_stat, 1);
+               if (pll_stat & 0x80) {
+                       i2c_master_send(c, &addr_adc_sat, 1);
+                       i2c_master_recv(c, &adc_sat, 1);
+                       i2c_master_send(c, &addr_agc_stat, 1);
+                       i2c_master_recv(c, &agc_stat, 1);
+                       tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat);
+                       break;
+               } else {
+                       tuner_dbg("tda8290 not locked, no signal?\n");
+                       msleep(100);
+               }
+       }
        /* adjust headroom resp. gain */
-       i2c_master_send(c, &addr_adc_sat, 1);
-       i2c_master_recv(c, &adc_sat, 1);
-       i2c_master_send(c, &addr_agc_stat, 1);
-       i2c_master_recv(c, &agc_stat, 1);
-       i2c_master_send(c, &addr_pll_stat, 1);
-       i2c_master_recv(c, &pll_stat, 1);
-       if (pll_stat & 0x80)
-               tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat);
-       else
-               tuner_dbg("tda8290 not locked, no signal?\n");
        if ((agc_stat > 115) || (!(pll_stat & 0x80) && (adc_sat < 20))) {
                tuner_dbg("adjust gain, step 1. Agc: %d, ADC stat: %d, lock: %d\n",
                           agc_stat, adc_sat, pll_stat & 0x80);
@@ -487,11 +542,16 @@ static void standby(struct i2c_client *c)
 
 static void tda8290_init_if(struct i2c_client *c)
 {
+       struct tuner *t = i2c_get_clientdata(c);
        unsigned char set_VS[] = { 0x30, 0x6F };
+       unsigned char set_GP00_CF[] = { 0x20, 0x01 };
        unsigned char set_GP01_CF[] = { 0x20, 0x0B };
 
+       if ((t->config == 1) || (t->config == 2))
+               i2c_master_send(c, set_GP00_CF, 2);
+       else
+               i2c_master_send(c, set_GP01_CF, 2);
        i2c_master_send(c, set_VS, 2);
-       i2c_master_send(c, set_GP01_CF, 2);
 }
 
 static void tda8290_init_tuner(struct i2c_client *c)