drm/i915: Fix FDI M/N setting according with correct color depth

FDI M/N calculation hasn't taken the current pipe color depth into account,
but always set as 24bpp. This one checks current pipe color depth setting,
and change FDI M/N calculation a little to use bits_per_pixel first, then
convert to bytes_per_pixel later.

This fixes display corrupt issue on Arrandle LVDS with 1600x900 panel
in 18bpp dual-channel mode.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5f92724..0dd87a7 100644 (file)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1782,6 +1782,11 @@
 #define   PIPE_START_VBLANK_INTERRUPT_STATUS   (1UL<<2) /* 965 or later */
 #define   PIPE_VBLANK_INTERRUPT_STATUS         (1UL<<1)
 #define   PIPE_OVERLAY_UPDATED_STATUS          (1UL<<0)
+#define   PIPE_BPC_MASK                        (7 << 5) /* Ironlake */
+#define   PIPE_8BPC                            (0 << 5)
+#define   PIPE_10BPC                           (1 << 5)
+#define   PIPE_6BPC                            (2 << 5)
+#define   PIPE_12BPC                           (3 << 5)
 
 #define DSPARB                 0x70030
 #define   DSPARB_CSTART_MASK   (0x7f << 7)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index be7fada..8278d9d 100644 (file)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2082,7 +2082,7 @@ fdi_reduce_ratio(u32 *num, u32 *den)
 #define LINK_N 0x80000
 
 static void
-igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+igdng_compute_m_n(int bits_per_pixel, int nlanes,
                int pixel_clock, int link_clock,
                struct fdi_m_n *m_n)
 {
@@ -2092,7 +2092,8 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes,
 
        temp = (u64) DATA_N * pixel_clock;
        temp = div_u64(temp, link_clock);
-       m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
+       m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
+       m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
        m_n->gmch_n = DATA_N;
        fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 
@@ -2766,7 +2767,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
        /* FDI link */
        if (IS_IGDNG(dev)) {
-               int lane, link_bw;
+               int lane, link_bw, bpp;
                /* eDP doesn't require FDI link, so just set DP M/N
                   according to current link config */
                if (is_edp) {
@@ -2785,7 +2786,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
                        lane = 4;
                        link_bw = 270000;
                }
-               igdng_compute_m_n(3, lane, target_clock,
+
+               /* determine panel color depth */
+               temp = I915_READ(pipeconf_reg);
+
+               switch (temp & PIPE_BPC_MASK) {
+               case PIPE_8BPC:
+                       bpp = 24;
+                       break;
+               case PIPE_10BPC:
+                       bpp = 30;
+                       break;
+               case PIPE_6BPC:
+                       bpp = 18;
+                       break;
+               case PIPE_12BPC:
+                       bpp = 36;
+                       break;
+               default:
+                       DRM_ERROR("unknown pipe bpc value\n");
+                       bpp = 24;
+               }
+
+               igdng_compute_m_n(bpp, lane, target_clock,
                                  link_bw, &m_n);
        }