[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ce00c57..43bd17b 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -583,7 +583,7 @@ config LEDS
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-                  ARCH_AT91RM9200 || MACH_TRIZEPS4
+                  ARCH_AT91 || MACH_TRIZEPS4
        help
          If you say Y here, the LEDs on your machine will be used
          to provide useful information about your current system status.

diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index df8595a..abf3352 100644 (file)
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 

diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index b4cd4b4..9ab0e0a 100644 (file)
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 

diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig
index 8d44326..9f11db8 100644 (file)
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91rm9200/Kconfig
@@ -92,6 +92,13 @@ if ARCH_AT91SAM9260
 
 comment "AT91SAM9260 Board Type"
 
+config MACH_AT91SAM9260EK
+       bool "Atmel AT91SAM9260-EK Evaluation Kit"
+       depends on ARCH_AT91SAM9260
+       help
+         Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+         <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
 endif
 
 # ----------------------------------------------------------
@@ -100,8 +107,31 @@ if ARCH_AT91SAM9261
 
 comment "AT91SAM9261 Board Type"
 
+config MACH_AT91SAM9261EK
+       bool "Atmel AT91SAM9261-EK Evaluation Kit"
+       depends on ARCH_AT91SAM9261
+       help
+         Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+         <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
 endif
 
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+       bool "Enable DataFlash Card support"
+       depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+       help
+         Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+       bool "Enable 16-bit data bus interface to NAND flash"
+       depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+       help
+         On AT91SAM926x boards both types of NAND flash can be present
+         (8 and 16 bit data bus width).
 
 # ----------------------------------------------------------
 

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ea41852..fbef8da 100644 (file)
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -91,11 +91,11 @@ config MMC_AU1X
 
          If unsure, say N.
 
-config MMC_AT91RM9200
-       tristate "AT91RM9200 SD/MMC Card Interface support"
-       depends on ARCH_AT91RM9200 && MMC
+config MMC_AT91
+       tristate "AT91 SD/MMC Card Interface support"
+       depends on ARCH_AT91 && MMC
        help
-         This selects the AT91RM9200 MCI controller.
+         This selects the AT91 MCI controller.
 
          If unsure, say N.
 

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index acfd4de..83ffb93 100644 (file)
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI)               += sdhci.o
 obj-$(CONFIG_MMC_WBSD)         += wbsd.o
 obj-$(CONFIG_MMC_AU1X)         += au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)         += omap.o
-obj-$(CONFIG_MMC_AT91RM9200)   += at91_mci.o
+obj-$(CONFIG_MMC_AT91)         += at91_mci.o
 obj-$(CONFIG_MMC_TIFM_SD)      += tifm_sd.o
 
 mmc_core-y := mmc.o mmc_sysfs.o

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index f9b1719..9980a4d 100644 (file)
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
        default y if ARCH_S3C2410
        default y if PXA27x
        default y if ARCH_EP93XX
-       default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+       default y if ARCH_AT91
        default y if ARCH_PNX4008
        # PPC:
        default y if STB03xxx

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bbbc82a..4097a86 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -189,7 +189,7 @@ config USB_OTG
 
 config USB_GADGET_AT91
        boolean "AT91 USB Device Port"
-       depends on ARCH_AT91RM9200
+       depends on ARCH_AT91
        select USB_GADGET_SELECTED
        help
           Many Atmel AT91 processors (such as the AT91RM2000) have a

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ea4714e..4776b3b 100644 (file)
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -935,7 +935,7 @@ MODULE_LICENSE ("GPL");
 #include "ohci-ppc-soc.c"
 #endif
 
-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
+#ifdef CONFIG_ARCH_AT91
 #include "ohci-at91.c"
 #endif
 
@@ -952,8 +952,7 @@ MODULE_LICENSE ("GPL");
       || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
-      || defined (CONFIG_ARCH_AT91RM9200) \
-      || defined (CONFIG_ARCH_AT91SAM9261) \
+      || defined (CONFIG_ARCH_AT91) \
       || defined (CONFIG_ARCH_PNX4008) \
        )
 #error "missing bus glue for ohci-hcd"