/* File descriptors for the Waker. */
struct {
int pipe[2];
- int lguest_fd;
} waker_fds;
/* The pointer to the start of guest memory. */
/* The pipe for signal hander to write to. */
static int timeoutpipe[2];
static unsigned int timeout_usec = 500;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
/* a per-cpu variable indicating whose vcpu is currently running */
static unsigned int __thread cpu_id;
/* If handle_input is set, it wants to be called when this file
* descriptor is ready. */
int fd;
- bool (*handle_input)(int fd, struct device *me);
+ bool (*handle_input)(struct device *me);
/* Any queues attached to this device */
struct virtqueue *vq;
u16 last_avail_idx;
/* The routine to call when the Guest pings us, or timeout. */
- void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
+ void (*handle_output)(struct virtqueue *me, bool timeout);
/* Outstanding buffers */
unsigned int inflight;
* saw the arguments it expects when we looked at initialize() in lguest_user.c:
* the base of Guest "physical" memory, the top physical page to allow and the
* entry point for the Guest. */
-static int tell_kernel(unsigned long start)
+static void tell_kernel(unsigned long start)
{
unsigned long args[] = { LHREQ_INITIALIZE,
(unsigned long)guest_base,
guest_limit / getpagesize(), start };
- int fd;
-
verbose("Guest: %p - %p (%#lx)\n",
guest_base, guest_base + guest_limit, guest_limit);
- fd = open_or_die("/dev/lguest", O_RDWR);
- if (write(fd, args, sizeof(args)) < 0)
+ lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+ if (write(lguest_fd, args, sizeof(args)) < 0)
err(1, "Writing to /dev/lguest");
-
- /* We return the /dev/lguest file descriptor to control this Guest */
- return fd;
}
/*:*/
}
/* Send LHREQ_BREAK command to snap the Launcher out of it. */
- pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
+ pwrite(lguest_fd, args, sizeof(args), cpu_id);
}
return 0;
}
/* This routine just sets up a pipe to the Waker process. */
-static void setup_waker(int lguest_fd)
+static void setup_waker(void)
{
/* This pipe is closed when Launcher dies, telling Waker. */
if (pipe(waker_fds.pipe) != 0)
err(1, "Creating pipe for Waker");
- /* Waker also needs to know the lguest fd */
- waker_fds.lguest_fd = lguest_fd;
-
if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
err(1, "Creating Waker");
}
}
/* This actually sends the interrupt for this virtqueue */
-static void trigger_irq(int fd, struct virtqueue *vq)
+static void trigger_irq(struct virtqueue *vq)
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
return;
/* Send the Guest an interrupt tell them we used something up. */
- if (write(fd, buf, sizeof(buf)) != 0)
+ if (write(lguest_fd, buf, sizeof(buf)) != 0)
err(1, "Triggering irq %i", vq->config.irq);
}
/* And here's the combo meal deal. Supersize me! */
-static void add_used_and_trigger(int fd, struct virtqueue *vq,
- unsigned int head, int len)
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
{
add_used(vq, head, len);
- trigger_irq(fd, vq);
+ trigger_irq(vq);
}
/*
};
/* This is the routine which handles console input (ie. stdin). */
-static bool handle_console_input(int fd, struct device *dev)
+static bool handle_console_input(struct device *dev)
{
int len;
unsigned int head, in_num, out_num;
}
/* Tell the Guest about the new input. */
- add_used_and_trigger(fd, dev->vq, head, len);
+ add_used_and_trigger(dev->vq, head, len);
/* Three ^C within one second? Exit.
*
close(waker_fds.pipe[1]);
/* Just in case Waker is blocked in BREAK, send
* unbreak now. */
- write(fd, args, sizeof(args));
+ write(lguest_fd, args, sizeof(args));
exit(2);
}
abort->count = 0;
/* Handling output for console is simple: we just get all the output buffers
* and write them to stdout. */
-static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
+static void handle_console_output(struct virtqueue *vq, bool timeout)
{
unsigned int head, out, in;
int len;
if (in)
errx(1, "Input buffers in output queue?");
len = writev(STDOUT_FILENO, iov, out);
- add_used_and_trigger(fd, vq, head, len);
+ add_used_and_trigger(vq, head, len);
}
}
* and write them (ignoring the first element) to this device's file descriptor
* (/dev/net/tun).
*/
-static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
+static void handle_net_output(struct virtqueue *vq, bool timeout)
{
unsigned int head, out, in, num = 0;
int len;
len = writev(vq->dev->fd, iov, out);
if (len < 0)
err(1, "Writing network packet to tun");
- add_used_and_trigger(fd, vq, head, len);
+ add_used_and_trigger(vq, head, len);
num++;
}
/* This is where we handle a packet coming in from the tun device to our
* Guest. */
-static bool handle_tun_input(int fd, struct device *dev)
+static bool handle_tun_input(struct device *dev)
{
unsigned int head, in_num, out_num;
int len;
err(1, "reading network");
/* Tell the Guest about the new packet. */
- add_used_and_trigger(fd, dev->vq, head, len);
+ add_used_and_trigger(dev->vq, head, len);
verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
/*L:215 This is the callback attached to the network and console input
* virtqueues: it ensures we try again, in case we stopped console or net
* delivery because Guest didn't have any buffers. */
-static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
+static void enable_fd(struct virtqueue *vq, bool timeout)
{
add_device_fd(vq->dev->fd);
/* Snap the Waker out of its select loop. */
write(waker_fds.pipe[1], "", 1);
}
-static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
+static void net_enable_fd(struct virtqueue *vq, bool timeout)
{
/* We don't need to know again when Guest refills receive buffer. */
vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
- enable_fd(fd, vq, timeout);
+ enable_fd(vq, timeout);
}
/* When the Guest tells us they updated the status field, we handle it. */
}
/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
-static void handle_output(int fd, unsigned long addr)
+static void handle_output(unsigned long addr)
{
struct device *i;
struct virtqueue *vq;
if (strcmp(vq->dev->name, "console") != 0)
verbose("Output to %s\n", vq->dev->name);
if (vq->handle_output)
- vq->handle_output(fd, vq, false);
+ vq->handle_output(vq, false);
return;
}
}
strnlen(from_guest_phys(addr), guest_limit - addr));
}
-static void handle_timeout(int fd)
+static void handle_timeout(void)
{
char buf[32];
struct device *i;
vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
vq->blocked = false;
if (vq->handle_output)
- vq->handle_output(fd, vq, true);
+ vq->handle_output(vq, true);
}
}
}
/* This is called when the Waker wakes us up: check for incoming file
* descriptors. */
-static void handle_input(int fd)
+static void handle_input(void)
{
/* select() wants a zeroed timeval to mean "don't wait". */
struct timeval poll = { .tv_sec = 0, .tv_usec = 0 };
* descriptors and a method of handling them. */
for (i = devices.dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
- if (i->handle_input(fd, i))
+ if (i->handle_input(i))
continue;
/* If handle_input() returns false, it means we
/* Is this the timeout fd? */
if (FD_ISSET(timeoutpipe[0], &fds))
- handle_timeout(fd);
+ handle_timeout();
}
}
/* Each device descriptor is followed by the description of its virtqueues. We
* specify how many descriptors the virtqueue is to have. */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
- void (*handle_output)(int, struct virtqueue *, bool))
+ void (*handle_output)(struct virtqueue *, bool))
{
unsigned int pages;
struct virtqueue **i, *vq = malloc(sizeof(*vq));
*
* See what I mean about userspace being boring? */
static struct device *new_device(const char *name, u16 type, int fd,
- bool (*handle_input)(int, struct device *))
+ bool (*handle_input)(struct device *))
{
struct device *dev = malloc(sizeof(*dev));
/* Now we've seen the I/O thread, we return to the Launcher to see what happens
* when that thread tells us it's completed some I/O. */
-static bool handle_io_finish(int fd, struct device *dev)
+static bool handle_io_finish(struct device *dev)
{
char c;
exit(1);
/* It did some work, so trigger the irq. */
- trigger_irq(fd, dev->vq);
+ trigger_irq(dev->vq);
return true;
}
/* When the Guest submits some I/O, we just need to wake the I/O thread. */
-static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
+static void handle_virtblk_output(struct virtqueue *vq, bool timeout)
{
struct vblk_info *vblk = vq->dev->priv;
char c = 0;
* console is the reverse.
*
* The same logic applies, however. */
-static bool handle_rng_input(int fd, struct device *dev)
+static bool handle_rng_input(struct device *dev)
{
int len;
unsigned int head, in_num, out_num, totlen = 0;
}
/* Tell the Guest about the new input. */
- add_used_and_trigger(fd, dev->vq, head, totlen);
+ add_used_and_trigger(dev->vq, head, totlen);
/* Everything went OK! */
return true;
/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
* its input and output, and finally, lays it to rest. */
-static void __attribute__((noreturn)) run_guest(int lguest_fd)
+static void __attribute__((noreturn)) run_guest(void)
{
for (;;) {
unsigned long args[] = { LHREQ_BREAK, 0 };
/* One unsigned long means the Guest did HCALL_NOTIFY */
if (readval == sizeof(notify_addr)) {
verbose("Notify on address %#lx\n", notify_addr);
- handle_output(lguest_fd, notify_addr);
+ handle_output(notify_addr);
continue;
/* ENOENT means the Guest died. Reading tells us why. */
} else if (errno == ENOENT) {
continue;
/* Service input, then unset the BREAK to release the Waker. */
- handle_input(lguest_fd);
+ handle_input();
if (pwrite(lguest_fd, args, sizeof(args), cpu_id) < 0)
err(1, "Resetting break");
}
/* Memory, top-level pagetable, code startpoint and size of the
* (optional) initrd. */
unsigned long mem = 0, start, initrd_size = 0;
- /* Two temporaries and the /dev/lguest file descriptor. */
- int i, c, lguest_fd;
+ /* Two temporaries. */
+ int i, c;
/* The boot information for the Guest. */
struct boot_params *boot;
/* If they specify an initrd file to load. */
/* We tell the kernel to initialize the Guest: this returns the open
* /dev/lguest file descriptor. */
- lguest_fd = tell_kernel(start);
+ tell_kernel(start);
/* We clone off a thread, which wakes the Launcher whenever one of the
* input file descriptors needs attention. We call this the Waker, and
* we'll cover it in a moment. */
- setup_waker(lguest_fd);
+ setup_waker();
/* Finally, run the Guest. This doesn't return. */
- run_guest(lguest_fd);
+ run_guest();
}
/*:*/
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff