V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER

This board has some special tea5767 configuration. Basically, radio
XTAL uses a different frequency than the other supported radios. It
uses a 13 MHz XTAL.

This patch adds the proper radio gpio and tea5767 configurations for
the board.

Also, with PAL/BG, the board requires some special init for tda9887:
port1=0 port2=0 qss=1

Thanks to Serge Kolotylo and MIDImaster for their help on identifying
the proper needs for this driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index a4eb6a8..f8a786a 100644 (file)
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 
 #include "cx88.h"
+#include "tea5767.h"
 
 static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
 static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
@@ -245,6 +246,10 @@ static const struct cx88_board cx88_boards[] = {
                }},
                .radio = {
                         .type   = CX88_RADIO,
+                        .vmux   = 3,
+                        .gpio0  = 0x000040bf,
+                        .gpio1  = 0x000080c0,
+                        .gpio2  = 0x0000ff20,
                },
        },
        [CX88_BOARD_WINFAST_DV2000] = {
@@ -1979,6 +1984,23 @@ static void cx88_card_setup(struct cx88_core *core)
                                                core->name, i);
                }
                break;
+       case CX88_BOARD_MSI_TVANYWHERE_MASTER:
+       {
+               struct v4l2_priv_tun_config tea5767_cfg;
+               struct tea5767_ctrl ctl;
+
+               memset(&ctl, 0, sizeof(ctl));
+
+               ctl.high_cut  = 1;
+               ctl.st_noise  = 1;
+               ctl.deemph_75 = 1;
+               ctl.xtal_freq = TEA5767_HIGH_LO_13MHz;
+
+               tea5767_cfg.tuner = TUNER_TEA5767;
+               tea5767_cfg.priv  = &ctl;
+
+               cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+       }
        }
 }