return default_chn;
}
-
-#if 0
-EXPORT_SYMBOL(Dot11d_Init);
-EXPORT_SYMBOL(Dot11d_Reset);
-EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
-EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
-EXPORT_SYMBOL(DOT11D_ScanComplete);
-EXPORT_SYMBOL(IsLegalChannel);
-EXPORT_SYMBOL(ToLegalChannel);
-#endif
}
kfree(hcrypt);
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
-EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
-EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
-
-EXPORT_SYMBOL(ieee80211_register_crypto_ops);
-EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
-EXPORT_SYMBOL(ieee80211_get_crypto_ops);
-#endif
-
-//module_init(ieee80211_crypto_init);
-//module_exit(ieee80211_crypto_deinit);
{
ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_ccmp_null);
-#endif
-
-//module_init(ieee80211_crypto_ccmp_init);
-//module_exit(ieee80211_crypto_ccmp_exit);
return -1;
hdr = (struct ieee80211_hdr *) skb->data;
-#if 0
-printk("@@ tkey\n");
-printk("%x|", ((u32*)tkey->key)[0]);
-printk("%x|", ((u32*)tkey->key)[1]);
-printk("%x|", ((u32*)tkey->key)[2]);
-printk("%x|", ((u32*)tkey->key)[3]);
-printk("%x|", ((u32*)tkey->key)[4]);
-printk("%x|", ((u32*)tkey->key)[5]);
-printk("%x|", ((u32*)tkey->key)[6]);
-printk("%x\n", ((u32*)tkey->key)[7]);
-#endif
if (!tkey->tx_phase1_done) {
tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
// printk("============>%s()\n", __func__);
return;
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_tkip_null);
-#endif
-
-
-//module_init(ieee80211_crypto_tkip_init);
-//module_exit(ieee80211_crypto_tkip_exit);
// printk("============>%s()\n", __func__);
return;
}
-#if 0
-EXPORT_SYMBOL(ieee80211_wep_null);
-#endif
-//module_init(ieee80211_crypto_wep_init);
-//module_exit(ieee80211_crypto_wep_exit);
free_netdev(dev);
}
-
-//#ifdef CONFIG_IEEE80211_DEBUG
-#if 0
-
-static int debug = 0;
-u32 ieee80211_debug_level = 0;
-struct proc_dir_entry *ieee80211_proc = NULL;
-
-static int show_debug_level(char *page, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- return snprintf(page, count, "0x%08X\n", ieee80211_debug_level);
-}
-
-static int store_debug_level(struct file *file, const char *buffer,
- unsigned long count, void *data)
-{
- char buf[] = "0x00000000";
- unsigned long len = min(sizeof(buf) - 1, (u32)count);
- char *p = (char *)buf;
- unsigned long val;
-
- if (copy_from_user(buf, buffer, len))
- return count;
- buf[len] = 0;
- if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
- p++;
- if (p[0] == 'x' || p[0] == 'X')
- p++;
- val = simple_strtoul(p, &p, 16);
- } else
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
- printk(KERN_INFO DRV_NAME
- ": %s is not in hex or decimal form.\n", buf);
- else
- ieee80211_debug_level = val;
-
- return strnlen(buf, count);
-}
-
-static int __init ieee80211_init(void)
-{
- struct proc_dir_entry *e;
-
- ieee80211_debug_level = debug;
- ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net);
- if (ieee80211_proc == NULL) {
- IEEE80211_ERROR("Unable to create " DRV_NAME
- " proc directory\n");
- return -EIO;
- }
- e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
- ieee80211_proc);
- if (!e) {
- remove_proc_entry(DRV_NAME, proc_net);
- ieee80211_proc = NULL;
- return -EIO;
- }
- e->read_proc = show_debug_level;
- e->write_proc = store_debug_level;
- e->data = NULL;
-
- return 0;
-}
-
-static void __exit ieee80211_exit(void)
-{
- if (ieee80211_proc) {
- remove_proc_entry("debug_level", ieee80211_proc);
- remove_proc_entry(DRV_NAME, proc_net);
- ieee80211_proc = NULL;
- }
-}
-
-#include <linux/moduleparam.h>
-module_param(debug, int, 0444);
-MODULE_PARM_DESC(debug, "debug output mask");
-
-
-module_exit(ieee80211_exit);
-module_init(ieee80211_init);
-#endif
-
-#if 0
-EXPORT_SYMBOL(alloc_ieee80211);
-EXPORT_SYMBOL(free_ieee80211);
-#endif
if (type == IEEE80211_FTYPE_MGMT) {
-
- #if 0
- if ( stype == IEEE80211_STYPE_AUTH &&
- fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
- (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
- {
- printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from " MAC_FMT "\n", dev->name,
- MAC_ARG(hdr->addr2));
- /* TODO: could inform hostapd about this so that it
- * could send auth failure report */
- goto rx_dropped;
- }
- #endif
-
-
if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
goto rx_dropped;
else
u8 * addr2
)
{
-#if 0
- u32 i = 0;
- u8 * p = (u8*)info_element->data;
- printk("-----------------------\n");
- printk("%s Country IE:", network->ssid);
- for(i=0; i<info_element->len; i++)
- printk("\t%2.2x", *(p+i));
- printk("\n-----------------------\n");
-#endif
if(IS_DOT11D_ENABLE(ieee))
{
if(info_element->len!= 0)
if(ieee->state != IEEE80211_LINKED)
break;
-#if 0
- network->last_dtim_sta_time[0] = stats->mac_time[0];
-#else
+
network->last_dtim_sta_time[0] = jiffies;
-#endif
network->last_dtim_sta_time[1] = stats->mac_time[1];
network->dtim_data = IEEE80211_DTIM_VALID;
if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
network->flags |= NETWORK_EMPTY_ESSID;
-#if 0
- stats->signal = ieee80211_SignalStrengthTranslate(stats->signal);
-#endif
+
stats->signal = ieee80211_TranslateToDbm(stats->signalstrength);
//stats->noise = stats->signal - stats->noise;
stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25;
(beacon->capability & (1<<0x2)) ? '1' : '0',
(beacon->capability & (1<<0x1)) ? '1' : '0',
(beacon->capability & (1<<0x0)) ? '1' : '0');
-#if 0
- if(strcmp(escape_essid(beacon->info_element.data, beacon->info_element.len), "rtl_softap") == 0)
- {
- if(WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON)
- {
- u32 i = 0, len = stats->len;
- u8 * p = (u8*)beacon;
- printk("-----------------------\n");
- printk("rtl_softap Beacon:");
- for(i=0; i<len; i++)
- printk("\t%2.2x", *(p+i));
- printk("\n-----------------------\n");
- }
- }
-#endif
+
if (ieee80211_network_init(ieee, beacon, &network, stats)) {
IEEE80211_DEBUG_SCAN("Dropped '%s' (" MAC_FMT ") via %s.\n",
escape_essid(info_element->data,
break;
}
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_rx_mgt);
-EXPORT_SYMBOL(ieee80211_rx);
-EXPORT_SYMBOL(ieee80211_network_init);
-#endif
DOT11D_ScanComplete(ieee);
}
-
-#if 0
-/* called both by wq with ieee->lock held */
-void ieee80211_softmac_scan(struct ieee80211_device *ieee)
-{
- short watchdog = 0;
-
- do{
- ieee->current_network.channel =
- (ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
- if (watchdog++ > MAX_CHANNEL_NUMBER)
- return; /* no good chans */
-
- }while(!ieee->channel_map[ieee->current_network.channel]);
-
-
- schedule_work(&ieee->softmac_scan_wq);
-}
-#endif
#ifdef ENABLE_IPS
void ieee80211_softmac_scan_wq(struct work_struct *work)
{
//add rsn==0 condition for ap's mix security mode(wpa+wpa2), john2007.8.9
//choose AES encryption as default algorithm while using mixed mode
-#if 0
- if(rsn_len == 0){
-
- tag = skb_put(skb,wpa_len);
-
- if(wpa_len) {
-
-
- //{add by david. 2006.8.31
- //fix linksys compatibility bug
- //}
- if(wpa_len > 24) {//22+2, mean include the capability
- beacon->wpa_ie[wpa_len - 2] = 0;
- }
- //multicast cipher OUI
- if( beacon->wpa_ie[11]==0x2 ){ //0x0050f202 is the oui of tkip
- ieee->broadcast_key_type = KEY_TYPE_TKIP;
- }
- else if( beacon->wpa_ie[11]==0x4 ){//0x0050f204 is the oui of ccmp
- ieee->broadcast_key_type = KEY_TYPE_CCMP;
- }
- //unicast cipher OUI
- if( beacon->wpa_ie[14]==0
- && beacon->wpa_ie[15]==0x50
- && beacon->wpa_ie[16]==0xf2
- && beacon->wpa_ie[17]==0x2 ){ //0x0050f202 is the oui of tkip
- ieee->pairwise_key_type = KEY_TYPE_TKIP;
- }
-
- else if( beacon->wpa_ie[14]==0
- && beacon->wpa_ie[15]==0x50
- && beacon->wpa_ie[16]==0xf2
- && beacon->wpa_ie[17]==0x4 ){//0x0050f204 is the oui of ccmp
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- }
- //indicate the wpa_ie content to WPA_SUPPLICANT
- buff = kmalloc(IW_CUSTOM_MAX, GFP_ATOMIC);
- memset(buff, 0, IW_CUSTOM_MAX);
- p=buff;
- p += sprintf(p, "ASSOCINFO(ReqIEs=");
- for(i=0;i<wpa_len;i++){
- p += sprintf(p, "%02x", beacon->wpa_ie[i]);
- }
- p += sprintf(p, ")");
- memset(&wrqu, 0, sizeof(wrqu) );
- wrqu.data.length = p - buff;
-
- wireless_send_event(dev, IWEVCUSTOM, &wrqu, buff);
- memcpy(tag,beacon->wpa_ie,wpa_len);
- }
-
- }
-
- if(rsn_len > 22) {
-
- if( beacon->rsn_ie[4]==0x0 &&
- beacon->rsn_ie[5]==0xf &&
- beacon->rsn_ie[6]==0xac){
-
- switch(beacon->rsn_ie[7]){
- case 0x1:
- ieee->broadcast_key_type = KEY_TYPE_WEP40;
- break;
- case 0x2:
- ieee->broadcast_key_type = KEY_TYPE_TKIP;
- break;
- case 0x4:
- ieee->broadcast_key_type = KEY_TYPE_CCMP;
- break;
- case 0x5:
- ieee->broadcast_key_type = KEY_TYPE_WEP104;
- break;
- default:
- printk("fault suite type in RSN broadcast key\n");
- break;
- }
- }
-
- if( beacon->rsn_ie[10]==0x0 &&
- beacon->rsn_ie[11]==0xf &&
- beacon->rsn_ie[12]==0xac){
- if(beacon->rsn_ie[8]==1){//not mixed mode
- switch(beacon->rsn_ie[13]){
- case 0x2:
- ieee->pairwise_key_type = KEY_TYPE_TKIP;
- break;
- case 0x4:
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- break;
- default:
- printk("fault suite type in RSN pairwise key\n");
- break;
- }
- }
- else if(beacon->rsn_ie[8]==2){//mixed mode
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- }
- }
-
-
-
- tag = skb_put(skb,22);
- memcpy(tag,(beacon->rsn_ie + info_addr),8);
- tag[1] = 20;
- tag += 8;
- info_addr += 8;
-
- spin_lock_irqsave(&ieee->wpax_suitlist_lock,flags);
- for (i = 0; i < 2; i++) {
- tag[0] = 1;
- tag[1] = 0;
- tag += 2;
- suite_count = beacon->rsn_ie[info_addr] + \
- (beacon->rsn_ie[info_addr + 1] << 8);
- info_addr += 2;
- if(1 == suite_count) {
- memcpy(tag,(beacon->rsn_ie + info_addr),4);
- info_addr += 4;
- } else {
- // if the wpax_type_notify has been set by the application,
- // just use it, otherwise just use the default one.
- if(ieee->wpax_type_set) {
- suit_select = ((0 == i) ? pairwise_type:authen_type)&0x0f ;
- memcpy(tag,rsn_authen_cipher_suite[suit_select],4);
- } else {
- //default set as ccmp, or none authentication
- if(i == 0) {
- memcpy(tag,rsn_authen_cipher_suite[4],4);
- } else {
- memcpy(tag,rsn_authen_cipher_suite[2],4);
- }
-
- }
-
- info_addr += (suite_count * 4);
- }
- tag += 4;
- }
- spin_unlock_irqrestore(&ieee->wpax_suitlist_lock,flags);
-
- tag[0] = 0;
- tag[1] = beacon->rsn_ie[info_addr+1];
-
- } else {
- tag = skb_put(skb,rsn_len);
- if(rsn_len) {
-
-
- if( beacon->rsn_ie[4]==0x0 &&
- beacon->rsn_ie[5]==0xf &&
- beacon->rsn_ie[6]==0xac){
- switch(beacon->rsn_ie[7]){
- case 0x1:
- ieee->broadcast_key_type = KEY_TYPE_WEP40;
- break;
- case 0x2:
- ieee->broadcast_key_type = KEY_TYPE_TKIP;
- break;
- case 0x4:
- ieee->broadcast_key_type = KEY_TYPE_CCMP;
- break;
- case 0x5:
- ieee->broadcast_key_type = KEY_TYPE_WEP104;
- break;
- default:
- printk("fault suite type in RSN broadcast key\n");
- break;
- }
- }
- if( beacon->rsn_ie[10]==0x0 &&
- beacon->rsn_ie[11]==0xf &&
- beacon->rsn_ie[12]==0xac){
- if(beacon->rsn_ie[8]==1){//not mixed mode
- switch(beacon->rsn_ie[13]){
- case 0x2:
- ieee->pairwise_key_type = KEY_TYPE_TKIP;
- break;
- case 0x4:
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- break;
- default:
- printk("fault suite type in RSN pairwise key\n");
- break;
- }
-
- }
- else if(beacon->rsn_ie[8]==2){//mixed mode
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- }
- }
-
- beacon->rsn_ie[rsn_len - 2] = 0;
- memcpy(tag,beacon->rsn_ie,rsn_len);
- }
- }
-#else
tag = skb_put(skb,ieee->wpa_ie_len);
memcpy(tag,ieee->wpa_ie,ieee->wpa_ie_len);
-#endif
+
tag = skb_put(skb,wmm_info_len);
if(wmm_info_len) {
ieee80211_WMM_Info(ieee, &tag);
}
printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest));
- //FIXME
- #if 0
- spin_lock_irqsave(&ieee->lock,flags);
- add_associate(ieee,dest);
- spin_unlock_irqrestore(&ieee->lock,flags);
- #endif
}
short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *time_l)
{
-#if 0
- int timeout = ieee->ps_timeout;
-#else
int timeout = 0;
-#endif
+
u8 dtim;
/*if(ieee->ps == IEEE80211_PS_DISABLED ||
ieee->iw_mode != IW_MODE_INFRA ||
if((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE ) &&
(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
return 0;
-#if 0
- if(time_l){
- *time_l = ieee->current_network.last_dtim_sta_time[0]
- + (ieee->current_network.beacon_interval
- * ieee->current_network.dtim_period) * 1000;
- }
-#else
+
if(time_l){
*time_l = ieee->current_network.last_dtim_sta_time[0]
+ MSECS((ieee->current_network.beacon_interval));
//printk("beacon_interval:%x, dtim_period:%x, totol to Msecs:%x, HZ:%x\n", ieee->current_network.beacon_interval, ieee->current_network.dtim_period, MSECS(((ieee->current_network.beacon_interval * ieee->current_network.dtim_period))), HZ);
}
-#endif
if(time_h){
*time_h = ieee->current_network.last_dtim_sta_time[1];
if(time_l && *time_l < ieee->current_network.last_dtim_sta_time[0])
int i;
spin_lock_irqsave(&ieee->lock,flags);
- #if 0
- if(ieee->queue_stop){
- IEEE80211DMESG("EE: IEEE hard_start_xmit invoked when kernel queue should be stopped");
- netif_stop_queue(ieee->dev);
- ieee->ieee_stats.swtxstop++;
- //dev_kfree_skb_any(skb);
- err = 1;
- goto exit;
- }
-
- ieee->stats.tx_bytes+=skb->len;
-
-
- txb=ieee80211_skb_to_txb(ieee,skb);
-
-
- if(txb==NULL){
- IEEE80211DMESG("WW: IEEE stack failed to provide txb");
- //dev_kfree_skb_any(skb);
- err = 1;
- goto exit;
- }
- #endif
/* called with 2nd parm 0, no tx mgmt lock required */
ieee80211_sta_wakeup(ieee,0);
//by amy
init_mgmt_queue(ieee);
-#if 0
- init_timer(&ieee->scan_timer);
- ieee->scan_timer.data = (unsigned long)ieee;
- ieee->scan_timer.function = ieee80211_softmac_scan_cb;
-#endif
+
ieee->tx_pending.txb = NULL;
init_timer(&ieee->associate_timer);
memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
}
-
-
-#if 0
-EXPORT_SYMBOL(ieee80211_get_beacon);
-EXPORT_SYMBOL(ieee80211_wake_queue);
-EXPORT_SYMBOL(ieee80211_stop_queue);
-EXPORT_SYMBOL(ieee80211_reset_queue);
-EXPORT_SYMBOL(ieee80211_softmac_stop_protocol);
-EXPORT_SYMBOL(ieee80211_softmac_start_protocol);
-EXPORT_SYMBOL(ieee80211_is_shortslot);
-EXPORT_SYMBOL(ieee80211_is_54g);
-EXPORT_SYMBOL(ieee80211_wpa_supplicant_ioctl);
-EXPORT_SYMBOL(ieee80211_ps_tx_ack);
-EXPORT_SYMBOL(ieee80211_start_protocol);
-EXPORT_SYMBOL(ieee80211_stop_protocol);
-EXPORT_SYMBOL(notify_wx_assoc_event);
-EXPORT_SYMBOL(ieee80211_stop_send_beacons);
-EXPORT_SYMBOL(SendDisassociation);
-EXPORT_SYMBOL(ieee80211_disassociate);
-EXPORT_SYMBOL(ieee80211_start_scan);
-EXPORT_SYMBOL(ieee80211_softmac_ips_scan_syncro);
-EXPORT_SYMBOL(ieee80211_sta_ps_send_null_frame);
-#endif
return ret;
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_wx_get_essid);
-EXPORT_SYMBOL(ieee80211_wx_set_essid);
-EXPORT_SYMBOL(ieee80211_wx_set_rate);
-EXPORT_SYMBOL(ieee80211_wx_get_rate);
-EXPORT_SYMBOL(ieee80211_wx_set_wap);
-EXPORT_SYMBOL(ieee80211_wx_get_wap);
-EXPORT_SYMBOL(ieee80211_wx_set_mode);
-EXPORT_SYMBOL(ieee80211_wx_get_mode);
-EXPORT_SYMBOL(ieee80211_wx_set_scan);
-EXPORT_SYMBOL(ieee80211_wx_get_freq);
-EXPORT_SYMBOL(ieee80211_wx_set_freq);
-EXPORT_SYMBOL(ieee80211_wx_set_rawtx);
-EXPORT_SYMBOL(ieee80211_wx_get_name);
-EXPORT_SYMBOL(ieee80211_wx_set_power);
-EXPORT_SYMBOL(ieee80211_wx_get_power);
-EXPORT_SYMBOL(ieee80211_wlan_frequencies);
-#endif
return NETDEV_TX_BUSY;
}
-
-#if 0
-EXPORT_SYMBOL(ieee80211_txb_free);
-#endif
if (iwe.u.data.length)
start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#if 0
- if (ieee->wpa_enabled && network->wpa_ie_len){
- char buf[MAX_WPA_IE_LEN * 2 + 30];
- // printk("WPA IE\n");
- u8 *p = buf;
- p += sprintf(p, "wpa_ie=");
- for (i = 0; i < network->wpa_ie_len; i++) {
- p += sprintf(p, "%02x", network->wpa_ie[i]);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = strlen(buf);
- start = iwe_stream_add_point(info, start, stop, &iwe, buf);
- }
-
- if (ieee->wpa_enabled && network->rsn_ie_len){
- char buf[MAX_WPA_IE_LEN * 2 + 30];
-
- u8 *p = buf;
- p += sprintf(p, "rsn_ie=");
- for (i = 0; i < network->rsn_ie_len; i++) {
- p += sprintf(p, "%02x", network->rsn_ie[i]);
- }
-
-
-#else
memset(&iwe, 0, sizeof(iwe));
if (network->wpa_ie_len) {
// printk("wpa_ie_len:%d\n", network->wpa_ie_len);
memset(&iwe, 0, sizeof(iwe));
if (network->rsn_ie_len) {
// printk("=====>rsn_ie_len:\n", network->rsn_ie_len);
- #if 0
- {
- int i;
- for (i=0; i<network->rsn_ie_len; i++);
- printk("%2x ", network->rsn_ie[i]);
- printk("\n");
- }
- #endif
char buf[MAX_WPA_IE_LEN];
memcpy(buf, network->rsn_ie, network->rsn_ie_len);
iwe.cmd = IWEVGENIE;
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
}
-#endif
-
/* Add EXTRA: Age to display seconds since last beacon/probe response
* for given network. */
iwe.cmd = IWEVCUSTOM;
sec.enabled = 1;
// sec.encrypt = 1;
-#if 0
- if (group_key ? !ieee->host_mc_decrypt :
- !(ieee->host_encrypt || ieee->host_decrypt ||
- ieee->host_encrypt_msdu))
- goto skip_host_crypt;
-#endif
+
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
#if 1
int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
-#if 0
- printk("====>%s()\n", __func__);
- {
- int i;
- for (i=0; i<len; i++)
- printk("%2x ", ie[i]&0xff);
- printk("\n");
- }
-#endif
u8 *buf = NULL;
if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
}
#endif
-
-#if 0
-EXPORT_SYMBOL(ieee80211_wx_set_gen_ie);
-EXPORT_SYMBOL(ieee80211_wx_set_mlme);
-EXPORT_SYMBOL(ieee80211_wx_set_auth);
-EXPORT_SYMBOL(ieee80211_wx_set_encode_ext);
-EXPORT_SYMBOL(ieee80211_wx_get_scan);
-EXPORT_SYMBOL(ieee80211_wx_set_encode);
-EXPORT_SYMBOL(ieee80211_wx_get_encode);
-#endif
add RTL8185 and RTL8225 support, and to David Young also.
*/
-#if 0
-double __floatsidf (int i) { return i; }
-unsigned int __fixunsdfsi (double d) { return d; }
-double __adddf3(double a, double b) { return a+b; }
-double __addsf3(float a, float b) { return a+b; }
-double __subdf3(double a, double b) { return a-b; }
-double __extendsfdf2(float a) {return a;}
-#endif
-
-
#undef DEBUG_TX_DESC2
#undef RX_DONT_PASS_UL
#undef DEBUG_EPROM
.subdevice = PCI_ANY_ID,
.driver_data = 0,
},
-#if 0
- {
- .vendor = PCI_VENDOR_ID_BELKIN,
- .device = 0x6001,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = 1,
- },
- { /* Belkin F5D6020 v3 */
- .vendor = PCI_VENDOR_ID_BELKIN,
- .device = 0x6020,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = 2,
- },
- { /* D-Link DWL-610 */
- .vendor = PCI_VENDOR_ID_DLINK,
- .device = 0x3300,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = 3,
- },
- {
- .vendor = PCI_VENDOR_ID_REALTEK,
- .device = 0x8185,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = 4,
- },
-#endif
{
.vendor = 0,
.device = 0,
return len;
}
-#if 0
-static int proc_get_stats_ieee(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- int len = 0;
-
- len += snprintf(page + len, count - len,
- "TXed association requests: %u\n"
- "TXed authentication requests: %u\n"
- "RXed successful association response: %u\n"
- "RXed failed association response: %u\n"
- "RXed successful authentication response: %u\n"
- "RXed failed authentication response: %u\n"
- "Association requests without response: %u\n"
- "Authentication requests without response: %u\n"
- "TX probe response: %u\n"
- "RX probe request: %u\n"
- "TX probe request: %lu\n"
- "RX authentication requests: %lu\n"
- "RX association requests: %lu\n"
- "Reassociations: %lu\n",
- priv->ieee80211->ieee_stats.tx_ass,
- priv->ieee80211->ieee_stats.tx_aut,
- priv->ieee80211->ieee_stats.rx_ass_ok,
- priv->ieee80211->ieee_stats.rx_ass_err,
- priv->ieee80211->ieee_stats.rx_aut_ok,
- priv->ieee80211->ieee_stats.rx_aut_err,
- priv->ieee80211->ieee_stats.ass_noresp,
- priv->ieee80211->ieee_stats.aut_noresp,
- priv->ieee80211->ieee_stats.tx_probe,
- priv->ieee80211->ieee_stats.rx_probe,
- priv->ieee80211->ieee_stats.tx_probe_rq,
- priv->ieee80211->ieee_stats.rx_auth_rq,
- priv->ieee80211->ieee_stats.rx_assoc_rq,
- priv->ieee80211->ieee_stats.reassoc);
-
- *eof = 1;
- return len;
-}
-#endif
-#if 0
-static int proc_get_stats_ap(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- struct mac_htable_t *list;
- int i;
- int len = 0;
-
- if(priv->ieee80211->iw_mode != IW_MODE_MASTER){
- len += snprintf(page + len, count - len,
- "Card is not acting as AP...\n"
- );
- }else{
- len += snprintf(page + len, count - len,
- "List of associated STA:\n"
- );
-
- for(i=0;i<MAC_HTABLE_ENTRY;i++)
- for (list = priv->ieee80211->assoc_htable[i]; list!=NULL; list = list->next){
- len += snprintf(page + len, count - len,
- MACSTR"\n",MAC2STR(list->adr));
- }
-
- }
- *eof = 1;
- return len;
-}
-#endif
-
static int proc_get_stats_tx(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
"/proc/net/r8180/%s/stats-tx\n",
dev->name);
}
- #if 0
- e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_ieee, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-ieee\n",
- dev->name);
- }
- #endif
- #if 0
- e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_ap, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-ap\n",
- dev->name);
- }
- #endif
e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_registers, dev);
/* FIXME FIXME FIXME FIXME */
-#if 0
- if( head <= tail ) return priv->txringcount-1 - (tail - head)/8;
- return (head - tail)/8/4;
-#else
if( head <= tail )
ret = priv->txringcount - (tail - head)/8;
else
if(ret > priv->txringcount ) DMESG("BUG");
return ret;
-#endif
}
dev_kfree_skb_any(priv->rx_skb);
}
-#if 0
-int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
-{
- int i;
- u32 *tmp;
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev,
- sizeof(u32)*8*count,
- &priv->txbeaconringdma);
- if (!priv->txbeaconring) return -1;
- for (tmp=priv->txbeaconring,i=0;i<count;i++){
- *tmp = *tmp &~ (1<<31); // descriptor empty, owned by the drv
- /*
- *(tmp+2) = (u32)dma_tmp;
- *(tmp+3) = bufsize;
- */
- if(i+1<count)
- *(tmp+4) = (u32)priv->txbeaconringdma+((i+1)*8*4);
- else
- *(tmp+4) = (u32)priv->txbeaconringdma;
-
- tmp=tmp+8;
- }
- return 0;
-}
-#endif
-
short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
int addr)
{
if (buf == NULL) return -ENOMEM;
switch(addr) {
-#if 0
- case TX_NORMPRIORITY_RING_ADDR:
- if(-1 == buffer_add(&(priv->txnpbufs),buf,dma_tmp,NULL)){
- DMESGE("Unable to allocate mem for buffer NP");
- return -ENOMEM;
- }
- break;
-
- case TX_LOWPRIORITY_RING_ADDR:
- if(-1 == buffer_add(&(priv->txlpbufs),buf,dma_tmp,NULL)){
- DMESGE("Unable to allocate mem for buffer LP");
- return -ENOMEM;
- }
- break;
-
- case TX_HIGHPRIORITY_RING_ADDR:
- if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){
- DMESGE("Unable to allocate mem for buffer HP");
- return -ENOMEM;
- }
- break;
-#else
case TX_MANAGEPRIORITY_RING_ADDR:
if(-1 == buffer_add(&(priv->txmapbufs),buf,dma_tmp,NULL)){
DMESGE("Unable to allocate mem for buffer NP");
return -ENOMEM;
}
break;
-#endif
case TX_HIGHPRIORITY_RING_ADDR:
if(-1 == buffer_add(&(priv->txhpbufs),buf,dma_tmp,NULL)){
DMESGE("Unable to allocate mem for buffer HP");
buffer_free(dev,&(priv->txbeaconbufs),priv->txbuffsize,1);
}
-#if 0
-void free_beacon_desc_ring(struct net_device *dev,int count)
-{
-
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- struct pci_dev *pdev=priv->pdev;
-
- pci_free_consistent(pdev, sizeof(u32)*8*count+256,
- priv->txbeaconring, priv->txbeaconringdma);
-
- if (priv->beacon_buf)
- pci_free_consistent(priv->pdev,
- priv->master_beaconsize,priv->beacon_buf,priv->beacondmabuf);
-
-}
-#endif
void free_rx_desc_ring(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
}else{*/
- #if 0
- /* Maybe it is possible that the NIC has skipped some descriptors or
- * it has reset its internal pointer to the beginning of the ring
- * we search for the first filled descriptor in the ring, or we break
- * putting again the pointer in the old location if we do not found any.
- * This is quite dangerous, what does happen if the nic writes
- * two descriptor (say A and B) when we have just checked the descriptor
- * A and we are going to check the descriptor B..This might happen if the
- * interrupt was dummy, there was not really filled descriptors and
- * the NIC didn't lose pointer
- */
-
- //priv->stats.rxwrkaround++;
-
- tmp = priv->rxringtail;
- while (*(priv->rxringtail) & (1<<31)){
-
- priv->rxringtail+=4;
-
- if(priv->rxringtail >=
- (priv->rxring)+(priv->rxringcount )*4)
- priv->rxringtail=priv->rxring;
-
- priv->rxbuffer=(priv->rxbuffer->next);
-
- if(priv->rxringtail == tmp ){
- //DMESG("EE: Could not find RX pointer");
- priv->stats.rxnopointer++;
- break;
- }
- }
- #else
-
tmp2 = NULL;
tmp = priv->rxringtail;
do{
}while(tmp != priv->rxring);
if(tmp2) priv->rxringtail = tmp2;
- #endif
//}
}
/* support for prism header has been originally added by Christian */
if(priv->prism_hdr && priv->ieee80211->iw_mode == IW_MODE_MONITOR){
-#if 0
- priv->rx_skb = dev_alloc_skb(len+2+PRISM_HDR_SIZE);
- if(! priv->rx_skb) goto drop;
-
- prism_hdr = (u32*) skb_put(priv->rx_skb,PRISM_HDR_SIZE);
- prism_hdr[0]=htonl(0x80211001); //version
- prism_hdr[1]=htonl(0x40); //length
- prism_hdr[2]=htonl(stats.mac_time[1]); //mactime (HIGH)
- prism_hdr[3]=htonl(stats.mac_time[0]); //mactime (LOW)
- rdtsc(prism_hdr[5], prism_hdr[4]); //hostime (LOW+HIGH)
- prism_hdr[4]=htonl(prism_hdr[4]); //Byte-Order aendern
- prism_hdr[5]=htonl(prism_hdr[5]); //Byte-Order aendern
- prism_hdr[6]=0x00; //phytype
- prism_hdr[7]=htonl(priv->chan); //channel
- prism_hdr[8]=htonl(stats.rate); //datarate
- prism_hdr[9]=0x00; //antenna
- prism_hdr[10]=0x00; //priority
- prism_hdr[11]=0x00; //ssi_type
- prism_hdr[12]=htonl(stats.signal); //ssi_signal
- prism_hdr[13]=htonl(stats.noise); //ssi_noise
- prism_hdr[14]=0x00; //preamble
- prism_hdr[15]=0x00; //encoding
-
-#endif
}else{
priv->rx_skb = dev_alloc_skb(len+2);
if( !priv->rx_skb) goto drop;
force_pci_posting(dev);
}
-#if 0
-void rtl8180_tx_queues_stop(struct net_device *dev)
-{
- //struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
-
- rtl8180_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask);
- rtl8180_set_mode(dev,EPROM_CMD_NORMAL);
-}
-#endif
-
void rtl8180_data_hard_stop(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
0,0,ieeerate2rtlrate(priv->ieee80211->basic_rate));
dev_kfree_skb_any(skb);
}
- #if 0
- //DMESG("size %x",len);
- if(*tail & (1<<31)){
-
- //DMESG("No more beacon TX desc");
- return ;
-
- }
- //while(! (*tail & (1<<31))){
- *tail= 0; // zeroes header
-
- *tail = *tail| (1<<29) ; //fist segment of the packet
- *tail = (*tail) | (1<<28); // last segment
- // *tail = *tail | (1<<18); // this is a beacon frame
- *(tail+3)=*(tail+3) &~ 0xfff;
- *(tail+3)=*(tail+3) | len; // buffer lenght
- *tail = *tail |len;
- // zeroes the second 32-bits dword of the descriptor
- *(tail+1)= 0;
- *tail = *tail | (rate << 24);
-
- duration = rtl8180_len2duration(len,rate,&ext);
-
- *(tail+1) = *(tail+1) | ((duration & 0x7fff)<<16);
-
- *tail = *tail | (1<<31);
- //^ descriptor ready to be txed
- if((tail - begin)/8 == priv->txbeaconcount-1)
- tail=begin;
- else
- tail=tail+8;
- //}
-#endif
}
/* This function do the real dirty work: it enqueues a TX command
//DMESG("rate %d",rate);
if(priv->card_8185){
-
- #if 0
- *(tail+5)&= ~(1<<24); /* tx ant 0 */
-
- *(tail+5) &= ~(1<<23); /* random tx agc 23-16 */
- *(tail+5) |= (1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16);
-
- *(tail+5) &=
-~((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8));
- *(tail+5) |= (7<<8); // Max retry limit
-
- *(tail+5) &= ~((1<<7)|(1<<6)|(1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1<<0));
- *(tail+5) |= (8<<4); // Max contention window
- *(tail+6) |= 4; // Min contention window
- #endif
// *(tail+5) = 0;
}
u16 = u16 &~ ATIM_MASK;
u16 = u16 | beacon->atim;
*/
-#if 0
- if (net->capability & WLAN_CAPABILITY_PRIVACY) {
- if (priv->hw_wep) {
- DMESG("Enabling hardware WEP support");
- rtl8180_set_hw_wep(dev);
- priv->ieee80211->host_encrypt=0;
- priv->ieee80211->host_decrypt=0;
- }
-#ifndef CONFIG_IEEE80211_NOWEP
- else {
- priv->ieee80211->host_encrypt=1;
- priv->ieee80211->host_decrypt=1;
- }
-#endif
- }
-#ifndef CONFIG_IEEE80211_NOWEP
- else{
- priv->ieee80211->host_encrypt=0;
- priv->ieee80211->host_decrypt=0;
- }
-#endif
-#endif
-
if(priv->card_8185)
rtl8180_set_chan(dev, priv->chan);
u16 tmpu16;
int i, j;
-#if 0
- for(i=0;i<0xFF;i++) {
- if(i%16 == 0)
- printk("\n[%x]: ", i/16);
- printk("\t%4.4x", eprom_read(dev,i));
- }
-#endif
priv->channel_plan = eprom_read(dev, EEPROM_COUNTRY_CODE>>1) & 0xFF;
if(priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN){
printk("rtl8180_init:Error channel plan! Set to default.\n");
priv->irq_enabled=0;
//YJ,modified,080828
-#if 0
- priv->stats.rxdmafail=0;
- priv->stats.txrdu=0;
- priv->stats.rxrdu=0;
- priv->stats.rxnolast=0;
- priv->stats.rxnodata=0;
- //priv->stats.rxreset=0;
- //priv->stats.rxwrkaround=0;
- priv->stats.rxnopointer=0;
- priv->stats.txnperr=0;
- priv->stats.txresumed=0;
- priv->stats.rxerr=0;
- priv->stats.rxoverflow=0;
- priv->stats.rxint=0;
- priv->stats.txnpokint=0;
- priv->stats.txhpokint=0;
- priv->stats.txhperr=0;
- priv->stats.ints=0;
- priv->stats.shints=0;
- priv->stats.txoverflow=0;
- priv->stats.txbeacon=0;
- priv->stats.txbeaconerr=0;
- priv->stats.txlperr=0;
- priv->stats.txlpokint=0;
- priv->stats.txretry=0;//tony 20060601
- priv->stats.rxcrcerrmin=0;
- priv->stats.rxcrcerrmid=0;
- priv->stats.rxcrcerrmax=0;
- priv->stats.rxicverr=0;
-#else
rtl8180_statistics_init(&priv->stats);
rtl8180_link_detect_init(&priv->link_detect);
-#endif
//YJ,modified,080828,end
adr |= 0x80;
phyw= ((data<<8) | adr);
-#if 0
-
- write_nic_dword(dev, PHY_ADR, phyw);
- //read_nic_dword(dev, PHY_ADR);
- for(i=0;i<10;i++){
- write_nic_dword(dev, PHY_ADR, 0xffffff7f & phyw);
- phyr = read_nic_byte(dev, PHY_READ);
- if(phyr == (data&0xff)) break;
-
- }
-#else
// Note that, we must write 0xff7c after 0x7d-0x7f to write BB register.
write_nic_byte(dev, 0x7f, ((phyw & 0xff000000) >> 24));
write_nic_byte(dev, 0x7e, ((phyw & 0x00ff0000) >> 16));
write_nic_byte(dev, 0x7d, ((phyw & 0x0000ff00) >> 8));
write_nic_byte(dev, 0x7c, ((phyw & 0x000000ff) ));
-#endif
+
/* this is ok to fail when we write AGC table. check for AGC table might be
* done by masking with 0x7f instead of 0xff
*/
rtl8180_prepare_beacon(dev);
rtl8180_irq_disable(dev);
rtl8180_beacon_tx_enable(dev);
-#if 0
- rtl8180_set_mode(dev,EPROM_CMD_CONFIG);
- //write_nic_byte(dev,0x9d,0x20); //DMA Poll
- //write_nic_word(dev,0x7a,0);
- //write_nic_word(dev,0x7a,0x8000);
-#if 0
- word = read_nic_word(dev, BcnItv);
- word &= ~BcnItv_BcnItv; // clear Bcn_Itv
- word |= priv->ieee80211->current_network.beacon_interval;//0x64;
- write_nic_word(dev, BcnItv, word);
-#endif
-#endif
word = read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd;
write_nic_word(dev, AtimWnd,word);// word |=
//priv->ieee80211->current_network.atim_window);
// priv->dot11PowerSaveMode = rtPsMode;
priv->ieee80211->ps = rtPsMode;
// Determine ListenInterval.
-#if 0
- if(priv->dot11PowerSaveMode == eMaxPs)
- {
- priv->ieee80211->ListenInterval = 10;
- }
- else
- {
- priv->ieee80211->ListenInterval = 2;
- }
-#endif
+
return true;
}
}
#endif
-#if 0
-#ifndef ENABLE_LPS
- if(priv->ieee80211->state == IEEE80211_LINKED){
- if( priv->NumRxOkInPeriod> 666 ||
- priv->NumTxOkInPeriod > 666 ) {
- bBusyTraffic = true;
- }
- if((priv->ieee80211->NumRxData + priv->NumTxOkInPeriod)<8) {
- bEnterPS= true;
- }
- if(bEnterPS) {
- LeisurePSEnter(priv);
- }
- else {
- LeisurePSLeave(priv);
- }
- }
- else {
- LeisurePSLeave(priv);
- }
-#endif
- priv->NumRxOkInPeriod = 0;
- priv->NumTxOkInPeriod = 0;
- priv->ieee80211->NumRxData = 0;
-#else
#ifdef ENABLE_LPS
if(priv->ieee80211->state == IEEE80211_LINKED){
priv->link_detect.NumRxOkInPeriod = priv->ieee80211->NumRxDataInPeriod;
priv->link_detect.NumTxOkInPeriod = 0;
priv->ieee80211->NumRxDataInPeriod = 0;
priv->ieee80211->NumRxBcnInPeriod = 0;
-#endif
}
int _rtl8180_up(struct net_device *dev)
{
//up(&priv->wx_sem);
}
-#if 0
-/* this is called by the kernel when it needs to TX a 802.3 encapsulated frame*/
-int rtl8180_8023_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->tx_lock,flags);
- ret = ieee80211_r8180_8023_hardstartxmit(skb,priv->ieee80211);
- spin_unlock_irqrestore(&priv->tx_lock,flags);
- return ret;
-}
-#endif
-
int r8180_set_mac_adr(struct net_device *dev, void *mac)
{
struct r8180_priv *priv = ieee80211_priv(dev);
else
head+=8;
}
-#if 0
- if(nicv == begin)
- txdv = begin + (priv->txringcount -1)*8;
- else
- txdv = nicv - 8;
- txed = !(txdv[0] &(1<<31));
-
- if(txed){
- if(!(txdv[0] & (1<<15))) error = 1;
- //if(!(txdv[0] & (1<<30))) error = 1;
- if(error)DMESG("%x",txdv[0]);
- }
-#endif
//DMESG("%x",txdv[0]);
/* the head has been moved to the last certainly TXed
* (or at least processed by the nic) packet.
readf_count = (readf_count+1)%0xffff;
#endif
-#if 0
- if(priv->up == 0)//driver stopped
- {
- printk("\nDo nothing...");
- goto out;
- }
- else
-#endif
{
// We should turn off LED before polling FF51[4].
static u8 read_acadapter_file(char *filename)
{
-#if 0
- int fd;
- char buf[1];
- char ret[50];
- int i = 0;
- int n = 0;
- mm_segment_t old_fs = get_fs();
- set_fs(KERNEL_DS);
-
- fd = sys_open(filename, O_RDONLY, 0);
- if (fd >= 0) {
- while (sys_read(fd, buf, 1) == 1)
- {
- i++;
- if(i>10)
- {
- if(buf[0]!=' ')
- {
- ret[n]=buf[0];
- n++;
- }
- }
- }
- sys_close(fd);
- }
- ret[n]='\0';
-// printk("%s \n", ret);
- set_fs(old_fs);
-
- if(strncmp(ret, "off-line",8) == 0)
- {
- return 1;
- }
-#endif
return 0;
}
if(priv->CurrAntennaIndex == 0)
{
-#if 0//lzm del 080826
-//by amy 080312
- if(priv->bSwAntennaDiverity)
- bResult = SetAntennaConfig87SE(dev, 1, true);
- else
-#endif
bResult = SetAntenna8185(dev, 1);
//by amy 080312
// printk("SwitchAntenna(): switching to antenna 1 ......\n");
}
else
{
-#if 0//lzm del 080826
-//by amy 080312
- if(priv->bSwAntennaDiverity)
- bResult = SetAntennaConfig87SE(dev, 0, true);
- else
-#endif
bResult = SetAntenna8185(dev, 0);
//by amy 080312
// printk("SwitchAntenna(): switching to antenna 0 ......\n");
84, //14
};
-#if 0
-/* maxim expects 4 bit address MSF, then 12 bit data MSF*/
-void write_maxim(struct net_device *dev,u8 adr, u32 data)
-{
-
- int shift;
- short bit;
- u16 word;
-
- adr = adr &0xf;
- word = (u16)data & 0xfff;
- word |= (adr<<12);
- /*write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN);
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(1);
-
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | BB_HOST_BANG_EN | BB_HOST_BANG_CLK);
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(1);
- */
-
- /* MAX2820 will sample data on rising edge of clock */
- for(shift = 15;shift >=0; shift--){
- bit = word>>shift & 1;
-
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA));
-
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(2);
-
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG |
- (bit<<BB_HOST_BANG_DATA) | BB_HOST_BANG_CLK); /* sample data */
-
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(1);
-
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG |
- (bit<<BB_HOST_BANG_DATA));
-
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(2);
-
- }
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
- BB_HOST_BANG_EN);
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(2);
-
- /* The shift register fill flush to the requested register the
- * last 12 bits data shifted in
- */
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
- BB_HOST_BANG_EN | BB_HOST_BANG_CLK);
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(2);
-
- write_nic_dword(dev,PHY_CONFIG,BB_HOST_BANG | (bit<<BB_HOST_BANG_DATA)|
- BB_HOST_BANG_EN);
- read_nic_dword(dev,PHY_CONFIG);
- mdelay(2);
-
-
-#ifdef DEBUG_MAXIM
- DMESG("Writing maxim: %x (adr %x)",phy_config,adr);
-#endif
-
-}
-#endif
-
void write_maxim(struct net_device *dev,u8 adr, u32 data) {
u32 temp;
temp = 0x90 + (data & 0xf);
0x63,0x58,0x70,0xc5,// -66dbm
};
-#if 0
-u8 rtl8225_init_gain[]={
- //0x00,0x00,0x00,0x00,//0x00,0x00,0x00,0x00,
- 0x33,0x80,0x6c,0xc5,//0x00,0x49,0x06,0xb5,//Gain = 0 ~ -78dbm
- 0x43,0x78,0x69,0xc5,//0x00,0x45,0x06,0xb1,//Gain = 1 ~ -74dbm
- 0x53,0x60,0x66,0xc5,//0x00,0x41,0x06,0xab,//Gain = 2 ~ -70dbm
- 0x63,0x58,0x63,0xc5,//0x00,0x3d,0x06,0xa5,//Gain = 3 ~ -66dbm
- 0x73,0x50,0x62,0xc5,//0x00,0x39,0x06,0xa1,//Gain = 4 ~ -62dbm
- 0x83,0x43,0x61,0xc5,//0x00,0x35,0x06,0x9b,//Gain = 5 ~ -58dbm
- 0x93,0x38,0x5a,0xc5,//0x00,0x31,0x06,0x99,//Gain = 6 ~ -54dbm
-};
-#endif
u32 rtl8225_chan[] ={
0,
0x0080, //ch1
};
-
-#if 0
-u16 rtl8225bc_rxgain[]={
- 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
- 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
- 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
- 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
- 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
- 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
- 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
- 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
- 0x0794, 0x0795, 0x0798, 0x0799, 0x039a, 0x039b, 0x039c, 0x039d,
- 0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
- 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
- 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
-
-};
-
-
-u16 rtl8225a_rxgain[]={
- 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
- 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
- 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
- 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
- 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
- 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
- 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
- 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
- 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
- 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
- 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad,
- 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad, 0x07ad
-};
-#endif
-
u8 rtl8225_agc[]={
0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96,
0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86,
write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
}
-#if 0
-
-void rtl8225_set_gain(struct net_device *dev, short gain)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
-
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
- if(priv->card_8185 == 2)
- write_phy_ofdm(dev, 0x21, 0x27);
- else
- write_phy_ofdm(dev, 0x21, 0x37);
-
- write_phy_ofdm(dev, 0x25, 0x20);
- write_phy_ofdm(dev, 0x11, 0x6);
-
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_ofdm(dev, 0x27, 0x8);
- else
- write_phy_ofdm(dev, 0x27, 0x88);
-
- write_phy_ofdm(dev, 0x14, 0);
- write_phy_ofdm(dev, 0x16, 0);
- write_phy_ofdm(dev, 0x15, 0x40);
- write_phy_ofdm(dev, 0x17, 0x40);
-
- write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]);
- write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]);
- write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
- write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
- //rtl8225_set_gain_usb(dev, gain);
-}
-#endif
-
void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
{
mdelay(1);
//write_nic_byte(dev, TX_AGC_CONTROL,4);
}
-#if 0
-/* switch between mode B and G */
-void rtl8225_set_mode(struct net_device *dev, short modeb)
-{
- write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
- write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
+
void rtl8225_rf_set_chan(struct net_device *dev, short ch)
{
struct r8180_priv *priv = ieee80211_priv(dev);
void rtl8225_host_usb_init(struct net_device *dev)
{
- #if 0
- write_nic_byte(dev,RFPinsSelect+1,0);
-
- write_nic_byte(dev,GPIO,0);
-
- write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7));
-
- write_nic_byte(dev,RFPinsSelect+1,4);
-
- write_nic_byte(dev,GPIO,0x20);
-
- write_nic_byte(dev,GP_ENABLE,0);
-
-
- /* Config BB & RF */
- write_nic_word(dev, RFPinsOutput, 0x80);
-
- write_nic_word(dev, RFPinsSelect, 0x80);
-
- write_nic_word(dev, RFPinsEnable, 0x80);
-
-
- mdelay(100);
-
- mdelay(1000);
-#endif
-
}
void rtl8225_rf_sleep(struct net_device *dev)
write_nic_word(dev, BRSR, 0xffff);
- #if 0
- if(priv->card_8185 == 1){/* version C or B */
- if(priv->card_8185_Bversion) /* version B*/
- write_nic_dword(dev, RF_PARA, 0x44);
- else /* version C */
- write_nic_dword(dev, RF_PARA, 0x100044);
- }else{ /* version D */
- if(priv->enable_gpio0)
- write_nic_dword(dev, RF_PARA, 0x20100044);
- else /* also USB */
- write_nic_dword(dev, RF_PARA, 0x100044);
- }
- #endif
-
write_nic_dword(dev, RF_PARA, 0x100044);
#if 1 //0->1
mdelay(1);
-
- #if 0
- }else if(priv->phy_ver == 1){
- /* version A */
- write_rtl8225(dev, 0x5, 0xbc0 + 2);
- }else{
- #endif
/* version B & C */
if(priv->card_type == USB)
for(i=0;i<95;i++){
write_rtl8225(dev, 0x1, (u8)(i+1));
- #if 0
- if(priv->phy_ver == 1)
- /* version A */
- write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]);
- else
- #endif
/* version B & C & D*/
write_rtl8225(dev, 0x2, rtl8225bcd_rxgain[i]);
write_phy_ofdm(dev, 0x8, 0x40); mdelay(1);
write_phy_ofdm(dev, 0x9, 0xfe); mdelay(1);
- #if 0
- if(priv->card_type == USB){
- write_phy_ofdm(dev, 0xa, 0x9);
- }else{
- if(priv->card_8185 == 1 && priv->card_8185_Bversion){
- /* Ver B
- * maybe later version can accept this also?
- */
- write_phy_ofdm(dev, 0xa, 0x6);
- write_phy_ofdm(dev, 0x18, 0x6f);
- }else{
- #endif
/* ver C & D */
write_phy_ofdm(dev, 0xa, 0x9); mdelay(1);
write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
- #if 0
- if(priv->card_8185 == 1){
- if(priv->card_8185_Bversion)
- write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/
- else
- write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/
- }else{
- #endif
write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
/*ver D & 8187*/
// }
write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
-#if 0
- }else{
- /* Ver B & C*/
- write_phy_ofdm(dev, 0x12, 0x0);
- write_phy_ofdm(dev, 0x13, 0x0);
- }
-#endif
write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
write_phy_ofdm(dev, 0x1c, 0x4);mdelay(1);
-#if 0
- if(priv->card_8185 == 1){
- if(priv->card_8185_Bversion){
- /*ver B*/
- write_phy_ofdm(dev, 0x1e, 0x95);
- write_phy_ofdm(dev, 0x1f, 0x55);
- }else{
- /*ver C*/
- write_phy_ofdm(dev, 0x1e, 0x90);
- write_phy_ofdm(dev, 0x1f, 0x34);
-
- }
- }else{
-#endif
/*ver D & 8187*/
write_phy_ofdm(dev, 0x1e, 0x95);mdelay(1);
write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
write_phy_ofdm(dev, 0x25, 0x20); mdelay(1);
write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-#if 0
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_ofdm(dev, 0x27, 0x08); /* Ver B. might work also fo ver C&D ?*/
- else
-#endif
write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
/* Ver C & D & 8187*/
write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
write_phy_cck(dev, 0x5, 0x12); mdelay(1);
write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-#if 0
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_cck(dev, 0x7, 0xd8); /* Ver B */
- else
-#endif
write_phy_cck(dev, 0x7, 0x78);mdelay(1);
/* Ver C & D & 8187*/
write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
write_phy_cck(dev, 0x11, 0x88); mdelay(1);
write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-#if 0
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_cck(dev, 0x13, 0x98); /* Ver B */
- else
-#endif
write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
write_phy_cck(dev, 0x19, 0x0);
0x63,0x24,0x4f,//,0x37,// -70dbm
0x73,0x0f,0x4c,//,0x37,// -66dbm
};
-#if 0
-u32 rtl8225_chan[] = {
- 0, //dummy channel 0
- 0x085c, //1
- 0x08dc, //2
- 0x095c, //3
- 0x09dc, //4
- 0x0a5c, //5
- 0x0adc, //6
- 0x0b5c, //7
- 0x0bdc, //8
- 0x0c5c, //9
- 0x0cdc, //10
- 0x0d5c, //11
- 0x0ddc, //12
- 0x0e5c, //13
- //0x0f5c, //14
- 0x0f72, // 14
-};
-#endif
//-
u16 rtl8225z2_rxgain[]={
0x1e,0x1f,0x20,0x21,0x22,0x23,
};
-#if 0
-//-
-u8 rtl8225_agc[]={
- 0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96,
- 0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86,
- 0x85,0x84,0x83,0x82,0x81,0x80,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36,
- 0x35,0x34,0x33,0x32,0x31,0x30,0x2f,0x2e,0x2d,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x26,
- 0x25,0x24,0x23,0x22,0x21,0x20,0x1f,0x1e,0x1d,0x1c,0x1b,0x1a,0x19,0x18,0x17,0x16,
- 0x15,0x14,0x13,0x12,0x11,0x10,0x0f,0x0e,0x0d,0x0c,0x0b,0x0a,0x09,0x08,0x07,0x06,
- 0x05,0x04,0x03,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
- 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
-};
-#endif
/*
from 0 to 0x23
u8 rtl8225_tx_gain_cck_ofdm[]={
}
-#if 0
-
-void rtl8225_set_gain(struct net_device *dev, short gain)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
-
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON);
-
- if(priv->card_8185 == 2)
- write_phy_ofdm(dev, 0x21, 0x27);
- else
- write_phy_ofdm(dev, 0x21, 0x37);
-
- write_phy_ofdm(dev, 0x25, 0x20);
- write_phy_ofdm(dev, 0x11, 0x6);
-
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_ofdm(dev, 0x27, 0x8);
- else
- write_phy_ofdm(dev, 0x27, 0x88);
-
- write_phy_ofdm(dev, 0x14, 0);
- write_phy_ofdm(dev, 0x16, 0);
- write_phy_ofdm(dev, 0x15, 0x40);
- write_phy_ofdm(dev, 0x17, 0x40);
-
- write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]);
- write_phy_ofdm(dev, 0x23, rtl8225_gain[gain * 4 + 1]);
- write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 4 + 2]);
- write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 4 + 3]);
- //rtl8225_set_gain_usb(dev, gain);
-}
-#endif
-
u32 read_rtl8225(struct net_device *dev, u8 adr)
{
u32 data2Write = ((u32)(adr & 0x1f)) << 27;
return dataRead;
}
-#if 0
-void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
-{
- int i;
- u16 out,select;
- u8 bit;
- u32 bangdata = (data << 4) | (adr & 0xf);
- struct r8180_priv *priv = ieee80211_priv(dev);
-
- out = read_nic_word(dev, RFPinsOutput) & 0xfff3;
- write_nic_word(dev,RFPinsEnable,
- (read_nic_word(dev,RFPinsEnable) | 0x7));
-
- select = read_nic_word(dev, RFPinsSelect);
-
- write_nic_word(dev, RFPinsSelect, select | 0x7 |
- ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO));
-
- force_pci_posting(dev);
- udelay(10);
-
- write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN );//| 0x1fff);
-
- force_pci_posting(dev);
- udelay(2);
-
- write_nic_word(dev, RFPinsOutput, out);
-
- force_pci_posting(dev);
- udelay(10);
-
-
- for(i=15; i>=0;i--){
-
- bit = (bangdata & (1<<i)) >> i;
-
- write_nic_word(dev, RFPinsOutput, bit | out);
-
- write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
- write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
- i--;
- bit = (bangdata & (1<<i)) >> i;
-
- write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
- write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
- write_nic_word(dev, RFPinsOutput, bit | out);
-
- }
-
- write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
- force_pci_posting(dev);
- udelay(10);
-
- write_nic_word(dev, RFPinsOutput, out |
- ((priv->card_type == USB) ? 4 : BB_HOST_BANG_EN));
-
- write_nic_word(dev, RFPinsSelect, select |
- ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO));
-
- if(priv->card_type == USB)
- mdelay(2);
- else
- rtl8185_rf_pins_enable(dev);
-}
-
-#endif
short rtl8225_is_V_z2(struct net_device *dev)
{
short vz2 = 1;
/* reg 8 pg 1 = 23*/
//printk(KERN_WARNING "RF Rigisters:\n");
-#if 0
- for(i = 0; i <= 0xf; i++)
- printk(KERN_WARNING "%08x,", read_rtl8225(dev, i));
- //printk(KERN_WARNING "reg[9]@pg1 = 0x%x\n", read_rtl8225(dev, 0x0F));
-// printk(KERN_WARNING "RF:\n");
-#endif
if( read_rtl8225(dev, 8) != 0x588)
vz2 = 0;
}
-#if 0
-void rtl8225_rf_close(struct net_device *dev)
-{
- write_rtl8225(dev, 0x4, 0x1f);
-
- force_pci_posting(dev);
- mdelay(1);
-
- rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_OFF);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_OFF);
-}
-#endif
-#if 0
-short rtl8225_rf_set_sens(struct net_device *dev, short sens)
-{
- if (sens <0 || sens > 6) return -1;
-
- if(sens > 4)
- write_rtl8225(dev, 0x0c, 0x850);
- else
- write_rtl8225(dev, 0x0c, 0x50);
-
- sens= 6-sens;
- rtl8225_set_gain(dev, sens);
-
- write_phy_cck(dev, 0x41, rtl8225_threshold[sens]);
- return 0;
-
-}
-#endif
-
-
void rtl8225z2_rf_close(struct net_device *dev)
{
RF_WriteReg(dev, 0x4, 0x1f);
// u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];//-by amy 080312
char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);//+by amy 080312
char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);//+by amy 080312
-#if 0
- //
- // CCX 2 S31, AP control of client transmit power:
- // 1. We shall not exceed Cell Power Limit as possible as we can.
- // 2. Tolerance is +/- 5dB.
- // 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit.
- //
- // TODO:
- // 1. 802.11h power contraint
- //
- // 071011, by rcnjko.
- //
- if( priv->OpMode == RT_OP_MODE_INFRASTRUCTURE &&
- priv->bWithCcxCellPwr &&
- ch == priv->dot11CurrentChannelNumber)
- {
- u8 CckCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_B, pMgntInfo->CcxCellPwr);
- u8 OfdmCellPwrIdx = DbmToTxPwrIdx(dev, WIRELESS_MODE_G, pMgntInfo->CcxCellPwr);
- printk("CCX Cell Limit: %d dBm => CCK Tx power index : %d, OFDM Tx power index: %d\n",
- priv->CcxCellPwr, CckCellPwrIdx, OfdmCellPwrIdx);
- printk("EEPROM channel(%d) => CCK Tx power index: %d, OFDM Tx power index: %d\n",
- channel, CckTxPwrIdx, OfdmTxPwrIdx);
-
- if(cck_power_level > CckCellPwrIdx)
- cck_power_level = CckCellPwrIdx;
- if(ofdm_power_level > OfdmCellPwrIdx)
- ofdm_power_level = OfdmCellPwrIdx;
-
- printk("Altered CCK Tx power index : %d, OFDM Tx power index: %d\n",
- CckTxPwrIdx, OfdmTxPwrIdx);
- }
-#endif
if(IS_DOT11D_ENABLE(priv->ieee80211) &&
IS_DOT11D_STATE_DONE(priv->ieee80211) )
{
mdelay(1);
}
-#if 0
-/* switch between mode B and G */
-void rtl8225_set_mode(struct net_device *dev, short modeb)
-{
- write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
- write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
{
force_pci_posting(dev);
mdelay(10);
-//deleted by David : 2006/8/9
-#if 0
- write_nic_byte(dev,SIFS,0x22);// SIFS: 0x22
-
- if(gset)
- write_nic_byte(dev,DIFS,20); //DIFS: 20
- else
- write_nic_byte(dev,DIFS,0x24); //DIFS: 36
-
- if(priv->ieee80211->state == IEEE80211_LINKED &&
- ieee80211_is_shortslot(priv->ieee80211->current_network))
- write_nic_byte(dev,SLOT,0x9); //SLOT: 9
-
- else
- write_nic_byte(dev,SLOT,0x14); //SLOT: 20 (0x14)
-
-
- if(gset){
- write_nic_byte(dev,EIFS,91 - 20); // EIFS: 91 (0x5B)
- write_nic_byte(dev,CW_VAL,0x73); //CW VALUE: 0x37
- //DMESG("using G net params");
- }else{
- write_nic_byte(dev,EIFS,91 - 0x24); // EIFS: 91 (0x5B)
- write_nic_byte(dev,CW_VAL,0xa5); //CW VALUE: 0x37
- //DMESG("using B net params");
- }
-#endif
-
}
-#if 0
-void rtl8225_host_pci_init(struct net_device *dev)
-{
- write_nic_word(dev, RFPinsOutput, 0x480);
-
- rtl8185_rf_pins_enable(dev);
-
- //if(priv->card_8185 == 2 && priv->enable_gpio0 ) /* version D */
- //write_nic_word(dev, RFPinsSelect, 0x88);
- //else
- write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); /* 0x488 | SW_CONTROL_GPIO */
-
- write_nic_byte(dev, GP_ENABLE, 0);
-
- force_pci_posting(dev);
- mdelay(200);
-
- write_nic_word(dev, GP_ENABLE, 0xff & (~(1<<6))); /* bit 6 is for RF on/off detection */
-
-}
-
-void rtl8225_host_usb_init(struct net_device *dev)
-{
- write_nic_byte(dev,RFPinsSelect+1,0);
-
- write_nic_byte(dev,GPIO,0);
-
- write_nic_byte_E(dev,0x53,read_nic_byte_E(dev,0x53) | (1<<7));
-
- write_nic_byte(dev,RFPinsSelect+1,4);
-
- write_nic_byte(dev,GPIO,0x20);
-
- write_nic_byte(dev,GP_ENABLE,0);
-
-
- /* Config BB & RF */
- write_nic_word(dev, RFPinsOutput, 0x80);
-
- write_nic_word(dev, RFPinsSelect, 0x80);
-
- write_nic_word(dev, RFPinsEnable, 0x80);
-
-
- mdelay(100);
-
- mdelay(1000);
-
-}
-#endif
void rtl8225z2_rf_init(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
for(i=0;i<95;i++){
write_rtl8225(dev, 0x1, (u8)(i+1));
- #if 0
- if(priv->phy_ver == 1)
- /* version A */
- write_rtl8225(dev, 0x2, rtl8225a_rxgain[i]);
- else
- #endif
/* version B & C & D*/
write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
mdelay(1);
}
-#if 0
- for(i=0;i<128;i++){
- write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
-
- mdelay(1);
- write_phy_ofdm(dev, 0xa, (u8)i+ 0x80);
-
- mdelay(1);
- }
-#endif
force_pci_posting(dev);
mdelay(1);
write_phy_ofdm(dev, 0xe, 0xd3);mdelay(1);
- #if 0
- if(priv->card_8185 == 1){
- if(priv->card_8185_Bversion)
- write_phy_ofdm(dev, 0xf, 0x20);/*ver B*/
- else
- write_phy_ofdm(dev, 0xf, 0x28);/*ver C*/
- }else{
- #endif
write_phy_ofdm(dev, 0xf, 0x38);mdelay(1);
/*ver D & 8187*/
// }
write_phy_ofdm(dev, 0x13, 0x20);mdelay(1);
-#if 0
- }else{
- /* Ver B & C*/
- write_phy_ofdm(dev, 0x12, 0x0);
- write_phy_ofdm(dev, 0x13, 0x0);
- }
-#endif
write_phy_ofdm(dev, 0x14, 0x0); mdelay(1);
write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
write_phy_ofdm(dev, 0x16, 0x0); mdelay(1);
write_phy_cck(dev, 0x10, ((priv->card_type == USB) ? 0x9b: 0x93)); mdelay(1);
write_phy_cck(dev, 0x11, 0x88); mdelay(1);
write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-#if 0
- if(priv->card_8185 == 1 && priv->card_8185_Bversion)
- write_phy_cck(dev, 0x13, 0x98); /* Ver B */
- else
-#endif
write_phy_cck(dev, 0x13, 0xd0); /* Ver C & D & 8187*/
write_phy_cck(dev, 0x19, 0x0);
QueueID++;
continue;
}
-#if 0 //reserved amy
- else if(priv->NdisAdapter.CurrentPowerState != NdisDeviceStateD0)
- {
- RT_TRACE(COMP_POWER, DBG_LOUD, ("eRfSleep: %d times TcbBusyQueue[%d] !=0 but lower power state!\n", (pMgntInfo->TxPollingTimes+1), QueueID));
- break;
- }
-#endif
else//lzm mod 080826
{
priv->TxPollingTimes ++;
QueueID++;
continue;
}
-#if 0
- else if(Adapter->NdisAdapter.CurrentPowerState != NdisDeviceStateD0)
- {
- RT_TRACE(COMP_POWER, DBG_LOUD, ("%d times TcbBusyQueue[%d] !=0 but lower power state!\n", (i+1), QueueID));
- break;
- }
-#endif
else
{
udelay(10);
{
// Update current RF state variable.
priv->eRFPowerState = eRFPowerState;
-#if 0
- switch(priv->eRFPowerState)
- {
- case eRfOff:
- //
- //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
- //
- if(priv->RfOffReason==RF_CHANGE_BY_IPS )
- {
- Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK);
- }
- else
- {
- // Turn off LED if RF is not ON.
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
- }
- break;
-
- case eRfOn:
- // Turn on RF we are still linked, which might happen when
- // we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
- if( pMgntInfo->bMediaConnect == TRUE )
- {
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
- }
- break;
-
- default:
- // do nothing.
- break;
- }
-#endif
-
}
priv->SetRFPowerStateInProgress = false;
mdelay(1);
//write_nic_byte(dev, TX_AGC_CONTROL,4);
}
-#if 0
-/* switch between mode B and G */
-void rtl8255_set_mode(struct net_device *dev, short modeb)
-{
- write_phy_ofdm(dev, 0x15, (modeb ? 0x0 : 0x40));
- write_phy_ofdm(dev, 0x17, (modeb ? 0x0 : 0x40));
-}
-#endif
void rtl8255_rf_set_chan(struct net_device *dev, short ch)
{
rtl8255_SetTXPowerLevel(dev, ch);
/* FIXME FIXME FIXME */
-
- #if 0
- write_nic_byte(dev,DIFS,0xe); //DIFS
- write_nic_byte(dev,SLOT,0x14); //SLOT
- write_nic_byte(dev,EIFS,0x5b); // EIFS
- //write_nic_byte(dev,0xbc,0); //CW CONFIG
- write_nic_byte(dev,0xbd,0xa4); //CW VALUE
- //write_nic_byte(dev,TX_AGC_CONTROL,4);
- //write_nic_byte(dev, 0x9d,7);
-//Apr 20 13:25:03 localhost kernel: w8. 409d<-7 // CCK AGC
- /*write_nic_word(dev,0x84,0x488);
- write_nic_byte(dev,0x91,0x3e);
- write_nic_byte(dev,0x90,0x30);
- write_nic_word(dev,0x84,0x488);
- write_nic_byte(dev,0x91,0x3e);
- write_nic_byte(dev,0x90,0x20);
- */
- //mdelay(100);
- #endif
}
void rtl8255_init_BGband(struct net_device *dev)
write_phy_cck(dev, 0x4a, 0x0);
write_phy_cck(dev, 0x4b, 0x0);
// write_phy_cck(dev, 0x4c, 0x5);
-#if 0
- write_phy_cck(dev, 0x41, 0x9d); /* Energy Threshold */
- // TESTR 0xb 8187
- write_phy_cck(dev, 0x10, 0x93);// & 0xfb);
-#endif
+
//rtl8255_set_gain(dev, 1); /* FIXME this '1' is random */
rtl8255_SetTXPowerLevel(dev, priv->chan);
wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
return wstats;
}
-#if 0
- spin_lock_irqsave(&ieee->lock, flag);
- list_for_each_entry(target, &ieee->network_list, list)
- {
- if (is_same_network(target, &ieee->current_network, ieee))
- {
- printk("it's same network:%s\n", target->ssid);
-#if 0
- if (!tmp_level)
- {
- tmp_level = target->stats.signalstrength;
- tmp_qual = target->stats.signal;
- }
- else
- {
- tmp_level = (15*tmp_level + target->stats.signalstrength)/16;
- tmp_qual = (15*tmp_qual + target->stats.signal)/16;
- }
-#else
- tmp_level = target->stats.signal;
- tmp_qual = target->stats.signalstrength;
- tmp_noise = target->stats.noise;
- printk("level:%d, qual:%d, noise:%d\n", tmp_level, tmp_qual, tmp_noise);
-#endif
- break;
- }
- }
- spin_unlock_irqrestore(&ieee->lock, flag);
-#endif
tmp_level = (&ieee->current_network)->stats.signal;
tmp_qual = (&ieee->current_network)->stats.signalstrength;
tmp_noise = (&ieee->current_network)->stats.noise;
RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); // Rx mode//+edward
RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); // Rx mode//+edward
-#if 0//-edward
- RF_WriteReg(dev, 0x00, 0x0197); mdelay(1);
- RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1);
- RF_WriteReg(dev, 0x00, 0x009F); mdelay(1);
-#endif
RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); // Rx mode//+edward
RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); // Rx mode//+edward
//power save parameters.
CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
*/
-#if 0
- write_nic_dword(dev, PHY_ADR, 0x0100c880);
- write_nic_dword(dev, PHY_ADR, 0x01001c86);
- write_nic_dword(dev, PHY_ADR, 0x01007890);
- write_nic_dword(dev, PHY_ADR, 0x0100d0ae);
- write_nic_dword(dev, PHY_ADR, 0x010006af);
- write_nic_dword(dev, PHY_ADR, 0x01004681);
-#endif
+
write_phy_cck(dev,0x00,0xc8);
write_phy_cck(dev,0x06,0x1c);
write_phy_cck(dev,0x10,0x78);
// Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26.
SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
//by amy 080312}
-#if 0
- // Config Sw/Hw Antenna Diversity
- if( priv->bSwAntennaDiverity ) // Use SW+Hw Antenna Diversity
- {
- if( priv->bDefaultAntenna1 == true ) // aux antenna
- {
- // Mac register, aux antenna
- write_nic_byte(dev, ANTSEL, 0x00);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
- write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
- write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0d, 0x54); // Reg0d : 54
- write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2
- }
- else // main antenna
- {
- // Mac register, main antenna
- write_nic_byte(dev, ANTSEL, 0x03);
- //base band
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
- write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
- write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c
- write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2
- }
- }
- else // Disable Antenna Diversity
- {
- if( priv->bDefaultAntenna1 == true ) // aux Antenna
- {
- // Mac register, aux antenna
- write_nic_byte(dev, ANTSEL, 0x00);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb
- write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
- write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0d, 0x54); // Reg0d : 54
- write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32
- }
- else // main Antenna
- {
- // Mac register, main antenna
- write_nic_byte(dev, ANTSEL, 0x03);
- // Config CCK RX antenna.
- write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b
- write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09
- write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47
- // Config OFDM RX antenna.
- write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c
- write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32
- }
- }
-#endif
//by amy for antenna
}
switch(priv->rf_chip)
{
-#if 0
- case RF_ZEBRA2:
- // Dynamic set initial gain, by shien chang, 2006.07.14
- switch(priv->InitialGain)
- {
- case 1: //m861dBm
- DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfa85); mdelay(1);
- break;
-
- case 2: //m862dBm
- DMESG("RTL8185B + 8225 Initial Gain State 2: -82 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- case 3: //m863dBm
- DMESG("RTL8185B + 8225 Initial Gain State 3: -82 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0x96a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- case 4: //m864dBm
- DMESG("RTL8185B + 8225 Initial Gain State 4: -78 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- case 5: //m82dBm
- DMESG("RTL8185B + 8225 Initial Gain State 5: -74 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x3697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- case 6: //m78dBm
- DMESG("RTL8185B + 8225 Initial Gain State 6: -70 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x4697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- case 7: //m74dBm
- DMESG("RTL8185B + 8225 Initial Gain State 7: -66 dBm \n");
- write_nic_dword(dev, PhyAddr, 0x5697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xa6a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfb85); mdelay(1);
- break;
-
- default: //MP
- DMESG("RTL8185B + 8225 Initial Gain State 1: -82 dBm (default)\n");
- write_nic_dword(dev, PhyAddr, 0x2697); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0x86a4); mdelay(1);
- write_nic_dword(dev, PhyAddr, 0xfa85); mdelay(1);
- break;
- }
- break;
-#endif
case RF_ZEBRA4:
// Dynamic set initial gain, follow 87B
switch(priv->InitialGain)
// <RJ_TODO_8185B> We shall set up the ARFR according to user's setting.
//write_nic_word(dev, ARFR, 0x0fff); // set 1M ~ 54M
//by amy
-#if 0
- PlatformIOWrite2Byte(dev, ARFR, 0x0fff); // set 1M ~ 54M
-#endif
// Aadded by Roger, 2007.11.15.
PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps.
//by amy
// Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.
//PlatformIOWrite4Byte(dev, RFTiming, 0x00004001);
//by amy
-#if 0
- write_nic_dword(dev, RFTiming, 0x00004001);
-#endif
// power save parameter based on "87SE power save parameters 20071127.doc", as follow.
//Enable DA10 TX power saving
notify_wx_assoc_event(priv->ieee80211);
// Stop SW Beacon.Use hw beacon so do not need to do so.by amy
-#if 0
- if(pMgntInfo->bEnableSwBeaconTimer)
- {
- // SwBeaconTimer will stop if pMgntInfo->mIbss==FALSE, see SwBeaconCallback() for details.
-// comment out by haich, 2007.10.01
-//#if DEV_BUS_TYPE==USB_INTERFACE
- PlatformCancelTimer( Adapter, &pMgntInfo->SwBeaconTimer);
-//#endif
- }
-#endif
// MgntIndicateMediaStatus( Adapter, RT_MEDIA_DISCONNECT, GENERAL_INDICATE );
//
// To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
//
-#if 0
- while( index < 4 )
- {
- if( ( pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP104_Encryption ) ||
- (pMgntInfo->SecurityInfo.PairwiseEncAlgorithm == WEP40_Encryption) )
- {
- if( pMgntInfo->SecurityInfo.KeyLen[index] != 0)
- pAdapter->HalFunc.SetKeyHandler(pAdapter, index, 0, FALSE, pMgntInfo->SecurityInfo.PairwiseEncAlgorithm, TRUE, FALSE);
- }
- index++;
- }
-#endif
priv->bSwRfProcessing = false;
}
//u32 rxconf;
/* for now we accept data, management & ctl frame*/
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-#if 0
- rxconf=read_nic_dword(dev,RX_CONF);
- rxconf = rxconf &~ MAC_FILTER_MASK;
- rxconf = rxconf | (1<<ACCEPT_MNG_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_DATA_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_BCAST_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_MCAST_FRAME_SHIFT);
-// rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
- if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode");
-
- if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC){
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- }else{
- rxconf = rxconf | (1<<ACCEPT_NICMAC_FRAME_SHIFT);
- if(priv->card_8185 == 0)
- rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
- }
-
- /*if(priv->ieee80211->iw_mode == IW_MODE_MASTER){
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- rxconf = rxconf | (1<<RX_CHECK_BSSID_SHIFT);
- }*/
-
- if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){
- rxconf = rxconf | (1<<ACCEPT_CTL_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_ICVERR_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_PWR_FRAME_SHIFT);
- }
-
- if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
- rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
-
- //if(!priv->card_8185){
- rxconf = rxconf &~ RX_FIFO_THRESHOLD_MASK;
- rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<<RX_FIFO_THRESHOLD_SHIFT);
- //}
-
- rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
- rxconf = rxconf &~ MAX_RX_DMA_MASK;
- rxconf = rxconf | (MAX_RX_DMA_2048<<MAX_RX_DMA_SHIFT);
-
- //if(!priv->card_8185)
- rxconf = rxconf | RCR_ONLYERLPKT;
-
- rxconf = rxconf &~ RCR_CS_MASK;
- if(!priv->card_8185)
- rxconf |= (priv->rcr_csense<<RCR_CS_SHIFT);
-// rxconf &=~ 0xfff00000;
-// rxconf |= 0x90100000;//9014f76f;
- write_nic_dword(dev, RX_CONF, rxconf);
-#endif
if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode");
//u32 txconf;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-#if 0
- txconf= read_nic_dword(dev,TX_CONF);
- if(priv->card_8185){
-
-
- byte = read_nic_byte(dev,CW_CONF);
- byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
- byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
- write_nic_byte(dev, CW_CONF, byte);
-
- tx_agc_ctl = read_nic_byte(dev, TX_AGC_CTL);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
- tx_agc_ctl |=(1<<TX_AGC_CTL_FEEDBACK_ANT);
- write_nic_byte(dev, TX_AGC_CTL, tx_agc_ctl);
- /*
- write_nic_word(dev, 0x5e, 0x01);
- force_pci_posting(dev);
- mdelay(1);
- write_nic_word(dev, 0xfe, 0x10);
- force_pci_posting(dev);
- mdelay(1);
- write_nic_word(dev, 0x5e, 0x00);
- force_pci_posting(dev);
- mdelay(1);
- */
- write_nic_byte(dev, 0xec, 0x3f); /* Disable early TX */
- }
-
- if(priv->card_8185){
-
- txconf = txconf &~ (1<<TCR_PROBE_NOTIMESTAMP_SHIFT);
-
- }else{
-
- if(hwseqnum)
- txconf= txconf &~ (1<<TX_CONF_HEADER_AUTOICREMENT_SHIFT);
- else
- txconf= txconf | (1<<TX_CONF_HEADER_AUTOICREMENT_SHIFT);
- }
-
- txconf = txconf &~ TX_LOOPBACK_MASK;
- txconf = txconf | (TX_LOOPBACK_NONE <<TX_LOOPBACK_SHIFT);
- txconf = txconf &~ TCR_DPRETRY_MASK;
- txconf = txconf &~ TCR_RTSRETRY_MASK;
- txconf = txconf | (priv->retry_data<<TX_DPRETRY_SHIFT);
- txconf = txconf | (priv->retry_rts<<TX_RTSRETRY_SHIFT);
- txconf = txconf &~ (1<<TX_NOCRC_SHIFT);
-
- if(priv->card_8185){
- if(priv->hw_plcp_len)
- txconf = txconf &~ TCR_PLCP_LEN;
- else
- txconf = txconf | TCR_PLCP_LEN;
- }else{
- txconf = txconf &~ TCR_SAT;
- }
- txconf = txconf &~ TCR_MXDMA_MASK;
- txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
- txconf = txconf | TCR_CWMIN;
- txconf = txconf | TCR_DISCW;
-
-// if(priv->ieee80211->hw_wep)
-// txconf=txconf &~ (1<<TX_NOICV_SHIFT);
-// else
- txconf=txconf | (1<<TX_NOICV_SHIFT);
-
- write_nic_dword(dev,TX_CONF,txconf);
-#endif
-
write_nic_dword(dev, TCR, priv->TransmitConfig);
byte = read_nic_byte(dev, MSR);
byte |= MSR_LINK_ENEDCA;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff