advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
- advwdt= [HW,WDT] Advantech WDT
- Format: <iostart>,<iostop>
-
aedsp16= [HW,OSS] Audio Excel DSP 16
Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
See also header of sound/oss/aedsp16.c.
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
- eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
- Format: <io>[,<irq>]
-
failslab=
fail_page_alloc=
fail_make_request=[KNL]
sched_debug [KNL] Enables verbose scheduler debug messages.
- sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver
- Format: <io>[,<timeout>[,<isapnp>]]
-
scsi_debug_*= [SCSI]
See drivers/scsi/scsi_debug.c.
wd7000= [HW,SCSI]
See header of drivers/scsi/wd7000.c.
- wdt= [WDT] Watchdog
- See Documentation/watchdog/wdt.txt.
+ watchdog timers [HW,WDT] For information on watchdog timers,
+ see Documentation/watchdog/watchdog-parameters.txt
+ or other driver-specific files in the
+ Documentation/watchdog/ directory.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
00-INDEX
- this file.
+hpwdt.txt
+ - information on the HP iLO2 NMI watchdog
pcwd-watchdog.txt
- documentation for Berkshire Products PC Watchdog ISA cards.
src/
- directory holding watchdog related example programs.
watchdog-api.txt
- description of the Linux Watchdog driver API.
+watchdog-parameters.txt
+ - information on driver parameters (for drivers other than
+ the ones that have driver-specific files here)
wdt.txt
- description of the Watchdog Timer Interfaces for Linux.
--- /dev/null
+This file provides information on the module parameters of many of
+the Linux watchdog drivers. Watchdog driver parameter specs should
+be listed here unless the driver has its own driver-specific information
+file.
+
+
+See Documentation/kernel-parameters.txt for information on
+providing kernel parameters for builtin drivers versus loadable
+modules.
+
+
+-------------------------------------------------
+acquirewdt:
+wdt_stop: Acquire WDT 'stop' io port (default 0x43)
+wdt_start: Acquire WDT 'start' io port (default 0x443)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+advantechwdt:
+wdt_stop: Advantech WDT 'stop' io port (default 0x443)
+wdt_start: Advantech WDT 'start' io port (default 0x443)
+timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+alim1535_wdt:
+timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+alim7101_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30
+use_gpio: Use the gpio watchdog (required by old cobalt boards).
+ default=0/off/no
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ar7_wdt:
+margin: Watchdog margin in seconds (default=60)
+nowayout: Disable watchdog shutdown on close
+ (default=kernel config parameter)
+-------------------------------------------------
+at32ap700x_wdt:
+timeout: Timeout value. Limited to be 1 or 2 seconds. (default=2)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+at91rm9200_wdt:
+wdt_time: Watchdog time in seconds. (default=5)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+at91sam9_wdt:
+heartbeat: Watchdog heartbeats in seconds. (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+bcm47xx_wdt:
+wdt_time: Watchdog time in seconds. (default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+bfin_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=20)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+coh901327_wdt:
+margin: Watchdog margin in seconds (default 60s)
+-------------------------------------------------
+cpu5wdt:
+port: base address of watchdog card, default is 0x91
+verbose: be verbose, default is 0 (no)
+ticks: count down ticks, default is 10000
+-------------------------------------------------
+cpwd:
+wd0_timeout: Default watchdog0 timeout in 1/10secs
+wd1_timeout: Default watchdog1 timeout in 1/10secs
+wd2_timeout: Default watchdog2 timeout in 1/10secs
+-------------------------------------------------
+davinci_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
+-------------------------------------------------
+ep93xx_wdt:
+nowayout: Watchdog cannot be stopped once started
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD)
+-------------------------------------------------
+eurotechwdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+io: Eurotech WDT io port (default=0x3f0)
+irq: Eurotech WDT irq (default=10)
+ev: Eurotech WDT event type (default is `int')
+-------------------------------------------------
+gef_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+geodewdt:
+timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+i6300esb:
+heartbeat: Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iTCO_wdt:
+heartbeat: Watchdog heartbeat in seconds.
+ (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iTCO_vendor_support:
+vendorsupport: iTCO vendor specific support mode, default=0 (none),
+ 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
+-------------------------------------------------
+ib700wdt:
+timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ibmasr:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+indydog:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iop_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+it8712f_wdt:
+margin: Watchdog margin in seconds (default 60)
+nowayout: Disable watchdog shutdown on close
+ (default=kernel config parameter)
+-------------------------------------------------
+it87_wdt:
+nogameport: Forbid the activation of game port, default=0
+exclusive: Watchdog exclusive device open, default=1
+timeout: Watchdog timeout in seconds, default=60
+testmode: Watchdog test mode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ixp2000_wdt:
+heartbeat: Watchdog heartbeat in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ixp4xx_wdt:
+heartbeat: Watchdog heartbeat in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ks8695_wdt:
+wdt_time: Watchdog time in seconds. (default=5)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+machzwd:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+action: after watchdog resets, generate:
+ 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI
+-------------------------------------------------
+max63xx_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+nodelay: Force selection of a timeout setting without initial delay
+ (max6373/74 only, default=0)
+-------------------------------------------------
+mixcomwd:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+mpc8xxx_wdt:
+timeout: Watchdog timeout in ticks. (0<timeout<65536, default=65535)
+reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+mpcore_wdt:
+mpcore_margin: MPcore timer margin in seconds.
+ (0 < mpcore_margin < 65536, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+mpcore_noboot: MPcore watchdog action, set to 1 to ignore reboots,
+ 0 to reboot (default=0
+-------------------------------------------------
+mv64x60_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+nuc900_wdt:
+heartbeat: Watchdog heartbeats in seconds.
+ (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+omap_wdt:
+timer_margin: initial watchdog timeout (in seconds)
+-------------------------------------------------
+orion_wdt:
+heartbeat: Initial watchdog heartbeat in seconds
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pc87413_wdt:
+io: pc87413 WDT I/O port (default: io).
+timeout: Watchdog timeout in minutes (default=timeout).
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pika_wdt:
+heartbeat: Watchdog heartbeats in seconds. (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pnx4008_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19
+nowayout: Set to 1 to keep watchdog running after device release
+-------------------------------------------------
+pnx833x_wdt:
+timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+start_enabled: Watchdog is started on module insertion (default=1)
+-------------------------------------------------
+rc32434_wdt:
+timeout: Watchdog timeout value, in seconds (default=20)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+riowd:
+riowd_timeout: Watchdog timeout in minutes (default=1)
+-------------------------------------------------
+s3c2410_wdt:
+tmr_margin: Watchdog tmr_margin in seconds. (default=15)
+tmr_atboot: Watchdog is started at boot time if set to 1, default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot
+debug: Watchdog debug, set to >1 for debug, (default 0)
+-------------------------------------------------
+sa1100_wdt:
+margin: Watchdog margin in seconds (default 60s)
+-------------------------------------------------
+sb_wdog:
+timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)
+-------------------------------------------------
+sbc60xxwdt:
+wdt_stop: SBC60xx WDT 'stop' io port (default 0x45)
+wdt_start: SBC60xx WDT 'start' io port (default 0x443)
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc7240_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30)
+nowayout: Disable watchdog when closing device file
+-------------------------------------------------
+sbc8360:
+timeout: Index into timeout table (0-63) (default=27 (60s))
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc_epx_c3:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc_fitpc2_wdt:
+margin: Watchdog margin in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------
+sc1200wdt:
+isapnp: When set to 0 driver ISA PnP support will be disabled (default=1)
+io: io port
+timeout: range is 0-255 minutes, default is 1
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sc520_wdt:
+timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sch311x_wdt:
+force_id: Override the detected device ID
+therm_trip: Should a ThermTrip trigger the reset generator
+timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+scx200_wdt:
+margin: Watchdog margin in seconds
+nowayout: Disable watchdog shutdown on close
+-------------------------------------------------
+shwdt:
+clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms)
+ to 0x7 (5.25ms). (default=7)
+heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+smsc37b787_wdt:
+timeout: range is 1-255 units, default is 60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+softdog:
+soft_margin: Watchdog soft_margin in seconds.
+ (0 < soft_margin < 65536, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot
+ (default=0)
+-------------------------------------------------
+stmp3xxx_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19
+-------------------------------------------------
+ts72xx_wdt:
+timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8)
+nowayout: Disable watchdog shutdown on close
+-------------------------------------------------
+twl4030_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+txx9wdt:
+timeout: Watchdog timeout in seconds. (0<timeout<N, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83627hf_wdt:
+wdt_io: w83627hf/thf WDT io port (default 0x2E)
+timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83697hf_wdt:
+wdt_io: w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)
+timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+early_disable: Watchdog gets disabled at boot time (default=1)
+-------------------------------------------------
+w83697ug_wdt:
+wdt_io: w83697ug/uf WDT io port (default 0x2e)
+timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83877f_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83977f_wdt:
+timeout: Watchdog timeout in seconds (15..7635), default=45)
+testmode: Watchdog testmode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wafer5823wdt:
+timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wdt285:
+soft_margin: Watchdog timeout in seconds (default=60)
+-------------------------------------------------
+wdt977:
+timeout: Watchdog timeout in seconds (60..15300, default=60)
+testmode: Watchdog testmode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wm831x_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wm8350_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
boards physically pull the machine down off their own onboard timers and
will reboot from almost anything.
-A second temperature monitoring interface is available on the WDT501P cards
+A second temperature monitoring interface is available on the WDT501P cards.
This provides /dev/temperature. This is the machine internal temperature in
degrees Fahrenheit. Each read returns a single byte giving the temperature.
The third interface logs kernel messages on additional alert events.
-The wdt card cannot be safely probed for. Instead you need to pass
-wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11".
+The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to
+pass IO address and IRQ boot parameters. E.g.:
+ wdt.io=0x240 wdt.irq=11
+
+Other "wdt" driver parameters are:
+ heartbeat Watchdog heartbeat in seconds (default 60)
+ nowayout Watchdog cannot be stopped once started (kernel
+ build parameter)
+ tachometer WDT501-P Fan Tachometer support (0=disable, default=0)
+ type WDT501-P Card type (500 or 501, default=500)
Features
--------
Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c
-
Watchdog timer embedded into KS8695 processor. This will reboot your
system when the timeout is reached.
+config HAVE_S3C2410_WATCHDOG
+ bool
+ help
+ This will include watchdog timer support for Samsung SoCs. If
+ you want to include watchdog support for any machine, kindly
+ select this in the respective mach-XXXX/Kconfig file.
+
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
help
- Watchdog timer block in the Samsung S3C2410 chips. This will
- reboot the system when the timer expires with the watchdog
- enabled.
+ Watchdog timer block in the Samsung SoCs. This will reboot
+ the system when the timer expires with the watchdog enabled.
The driver is limited by the speed of the system's PCLK
signal, so with reasonably fast systems (PCLK around 50-66MHz)
help
Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+config IMX2_WDT
+ tristate "IMX2+ Watchdog"
+ depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5
+ help
+ This is the driver for the hardware watchdog
+ on the Freescale IMX2 and later processors.
+ If you have one of these processors and wish to have
+ watchdog support enabled, say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx2_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
+obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
#include <linux/interrupt.h>
#include <linux/uaccess.h>
#include <asm/blackfin.h>
+#include <asm/bfin_watchdog.h>
#define stamp(fmt, args...) \
pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
# define bfin_write_WDOG_STAT(x) bfin_write_WDOGA_STAT(x)
#endif
-/* Bit in SWRST that indicates boot caused by watchdog */
-#define SWRST_RESET_WDOG 0x4000
-
-/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */
-#define WDOG_EXPIRED 0x8000
-
-/* Masks for WDEV field in WDOG_CTL register */
-#define ICTL_RESET 0x0
-#define ICTL_NMI 0x2
-#define ICTL_GPI 0x4
-#define ICTL_NONE 0x6
-#define ICTL_MASK 0x6
-
-/* Masks for WDEN field in WDOG_CTL register */
-#define WDEN_MASK 0x0FF0
-#define WDEN_ENABLE 0x0000
-#define WDEN_DISABLE 0x0AD0
-
/* some defaults */
#define WATCHDOG_TIMEOUT 20
if (copy_to_user((void *)arg, &ident, sizeof(ident)))
return -EFAULT;
case WDIOC_GETSTATUS:
- return put_user(ident.options, p);
+ return put_user(0, p);
case WDIOC_GETBOOTSTATUS:
/* XXX: something is clearing TSR */
tmp = mfspr(SPRN_TSR) & TSR_WRS(3);
- /* returns 1 if last reset was caused by the WDT */
- return (tmp ? 1 : 0);
+ /* returns CARDRESET if last reset was caused by the WDT */
+ return (tmp ? WDIOF_CARDRESET : 0);
case WDIOC_SETOPTIONS:
if (get_user(tmp, p))
return -EINVAL;
/*
* You must set these - there is no sane way to probe for this board.
- * You can use eurwdt=x,y to set these now.
*/
static int io = 0x3f0;
outl(val32, SMI_EN); /* Needed to deactivate watchdog */
}
-static void supermicro_old_pre_keepalive(unsigned long acpibase)
-{
- /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
- /* Clear "Expire Flag" (Bit 3 of TC01_STS register) */
- outb(0x08, TCO1_STS);
-}
-
/*
* Vendor Support: 2
* Board: Super Micro Computer Inc. P4SBx, P4DPx
void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
{
- if (vendorsupport == SUPERMICRO_OLD_BOARD)
- supermicro_old_pre_keepalive(acpibase);
- else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_set_heartbeat(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.05"
+#define DRV_VERSION "1.06"
#define PFX DRV_NAME ": "
/* Includes */
#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
- "(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default="
+MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
+ "5..76 (TCO v1) or 3..614 (TCO v2), default="
__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
/* Reload the timer by writing to the TCO Timer Counter register */
if (iTCO_wdt_private.iTCO_version == 2)
outw(0x01, TCO_RLD);
- else if (iTCO_wdt_private.iTCO_version == 1)
+ else if (iTCO_wdt_private.iTCO_version == 1) {
+ /* Reset the timeout status bit so that the timer
+ * needs to count down twice again before rebooting */
+ outw(0x0008, TCO1_STS); /* write 1 to clear bit */
+
outb(0x01, TCO_RLD);
+ }
spin_unlock(&iTCO_wdt_private.io_lock);
return 0;
unsigned int tmrval;
tmrval = seconds_to_ticks(t);
+
+ /* For TCO v1 the timer counts down twice before rebooting */
+ if (iTCO_wdt_private.iTCO_version == 1)
+ tmrval /= 2;
+
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
if (tmrval < 0x04)
spin_lock(&iTCO_wdt_private.io_lock);
val8 = inb(TCO_RLD);
val8 &= 0x3f;
+ if (!(inw(TCO1_STS) & 0x0008))
+ val8 += (inb(TCOv1_TMR) & 0x3f);
spin_unlock(&iTCO_wdt_private.io_lock);
*time_left = (val8 * 6) / 10;
TCOBASE);
/* Clear out the (probably old) status */
- outb(8, TCO1_STS); /* Clear the Time Out Status bit */
- outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */
- outb(4, TCO2_STS); /* Clear BOOT_STS bit */
+ outw(0x0008, TCO1_STS); /* Clear the Time Out Status bit */
+ outw(0x0002, TCO2_STS); /* Clear SECOND_TO_STS bit */
+ outw(0x0004, TCO2_STS); /* Clear BOOT_STS bit */
/* Make sure the watchdog is not running */
iTCO_wdt_stop();
if (iTCO_wdt_set_heartbeat(heartbeat)) {
iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
printk(KERN_INFO PFX
- "heartbeat value must be 2 < heartbeat < 39 (TCO v1) "
- "or 613 (TCO v2), using %d\n", heartbeat);
+ "timeout value out of range, using %d\n", heartbeat);
}
ret = misc_register(&iTCO_wdt_miscdev);
--- /dev/null
+/*
+ * Watchdog driver for IMX2 and later processors
+ *
+ * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de>
+ *
+ * some parts adapted by similar drivers from Darius Augulis and Vladimir
+ * Zapolskiy, additional improvements by Wim Van Sebroeck.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * NOTE: MX1 has a slightly different Watchdog than MX2 and later:
+ *
+ * MX1: MX2+:
+ * ---- -----
+ * Registers: 32-bit 16-bit
+ * Stopable timer: Yes No
+ * Need to enable clk: No Yes
+ * Halt on suspend: Manual Can be automatic
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <mach/hardware.h>
+
+#define DRIVER_NAME "imx2-wdt"
+
+#define IMX2_WDT_WCR 0x00 /* Control Register */
+#define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
+#define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */
+#define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */
+
+#define IMX2_WDT_WSR 0x02 /* Service Register */
+#define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */
+#define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */
+
+#define IMX2_WDT_MAX_TIME 128
+#define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */
+
+#define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8)
+
+#define IMX2_WDT_STATUS_OPEN 0
+#define IMX2_WDT_STATUS_STARTED 1
+#define IMX2_WDT_EXPECT_CLOSE 2
+
+static struct {
+ struct clk *clk;
+ void __iomem *base;
+ unsigned timeout;
+ unsigned long status;
+ struct timer_list timer; /* Pings the watchdog when closed */
+} imx2_wdt;
+
+static struct miscdevice imx2_wdt_miscdev;
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static unsigned timeout = IMX2_WDT_DEFAULT_TIME;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+ __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")");
+
+static const struct watchdog_info imx2_wdt_info = {
+ .identity = "imx2+ watchdog",
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+};
+
+static inline void imx2_wdt_setup(void)
+{
+ u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
+
+ /* Strip the old watchdog Time-Out value */
+ val &= ~IMX2_WDT_WCR_WT;
+ /* Generate reset if WDOG times out */
+ val &= ~IMX2_WDT_WCR_WRE;
+ /* Keep Watchdog Disabled */
+ val &= ~IMX2_WDT_WCR_WDE;
+ /* Set the watchdog's Time-Out value */
+ val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout);
+
+ __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
+
+ /* enable the watchdog */
+ val |= IMX2_WDT_WCR_WDE;
+ __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
+}
+
+static inline void imx2_wdt_ping(void)
+{
+ __raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR);
+ __raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR);
+}
+
+static void imx2_wdt_timer_ping(unsigned long arg)
+{
+ /* ping it every imx2_wdt.timeout / 2 seconds to prevent reboot */
+ imx2_wdt_ping();
+ mod_timer(&imx2_wdt.timer, jiffies + imx2_wdt.timeout * HZ / 2);
+}
+
+static void imx2_wdt_start(void)
+{
+ if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
+ /* at our first start we enable clock and do initialisations */
+ clk_enable(imx2_wdt.clk);
+
+ imx2_wdt_setup();
+ } else /* delete the timer that pings the watchdog after close */
+ del_timer_sync(&imx2_wdt.timer);
+
+ /* Watchdog is enabled - time to reload the timeout value */
+ imx2_wdt_ping();
+}
+
+static void imx2_wdt_stop(void)
+{
+ /* we don't need a clk_disable, it cannot be disabled once started.
+ * We use a timer to ping the watchdog while /dev/watchdog is closed */
+ imx2_wdt_timer_ping(0);
+}
+
+static void imx2_wdt_set_timeout(int new_timeout)
+{
+ u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR);
+
+ /* set the new timeout value in the WSR */
+ val &= ~IMX2_WDT_WCR_WT;
+ val |= WDOG_SEC_TO_COUNT(new_timeout);
+ __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR);
+}
+
+static int imx2_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status))
+ return -EBUSY;
+
+ imx2_wdt_start();
+ return nonseekable_open(inode, file);
+}
+
+static int imx2_wdt_close(struct inode *inode, struct file *file)
+{
+ if (test_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status) && !nowayout)
+ imx2_wdt_stop();
+ else {
+ dev_crit(imx2_wdt_miscdev.parent,
+ "Unexpected close: Expect reboot!\n");
+ imx2_wdt_ping();
+ }
+
+ clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
+ clear_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status);
+ return 0;
+}
+
+static long imx2_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int new_value;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &imx2_wdt_info,
+ sizeof(struct watchdog_info)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ imx2_wdt_ping();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_value, p))
+ return -EFAULT;
+ if ((new_value < 1) || (new_value > IMX2_WDT_MAX_TIME))
+ return -EINVAL;
+ imx2_wdt_set_timeout(new_value);
+ imx2_wdt.timeout = new_value;
+ imx2_wdt_ping();
+
+ /* Fallthrough to return current value */
+ case WDIOC_GETTIMEOUT:
+ return put_user(imx2_wdt.timeout, p);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static ssize_t imx2_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ size_t i;
+ char c;
+
+ if (len == 0) /* Can we see this even ? */
+ return 0;
+
+ clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
+ /* scan to see whether or not we got the magic character */
+ for (i = 0; i != len; i++) {
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ set_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status);
+ }
+
+ imx2_wdt_ping();
+ return len;
+}
+
+static const struct file_operations imx2_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .unlocked_ioctl = imx2_wdt_ioctl,
+ .open = imx2_wdt_open,
+ .release = imx2_wdt_close,
+ .write = imx2_wdt_write,
+};
+
+static struct miscdevice imx2_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &imx2_wdt_fops,
+};
+
+static int __init imx2_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ int res_size;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get device resources\n");
+ return -ENODEV;
+ }
+
+ res_size = resource_size(res);
+ if (!devm_request_mem_region(&pdev->dev, res->start, res_size,
+ res->name)) {
+ dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
+ res_size, res->start);
+ return -ENOMEM;
+ }
+
+ imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size);
+ if (!imx2_wdt.base) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -ENOMEM;
+ }
+
+ imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL);
+ if (IS_ERR(imx2_wdt.clk)) {
+ dev_err(&pdev->dev, "can't get Watchdog clock\n");
+ return PTR_ERR(imx2_wdt.clk);
+ }
+
+ imx2_wdt.timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME);
+ if (imx2_wdt.timeout != timeout)
+ dev_warn(&pdev->dev, "Initial timeout out of range! "
+ "Clamped from %u to %u\n", timeout, imx2_wdt.timeout);
+
+ setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0);
+
+ imx2_wdt_miscdev.parent = &pdev->dev;
+ ret = misc_register(&imx2_wdt_miscdev);
+ if (ret)
+ goto fail;
+
+ dev_info(&pdev->dev,
+ "IMX2+ Watchdog Timer enabled. timeout=%ds (nowayout=%d)\n",
+ imx2_wdt.timeout, nowayout);
+ return 0;
+
+fail:
+ imx2_wdt_miscdev.parent = NULL;
+ clk_put(imx2_wdt.clk);
+ return ret;
+}
+
+static int __exit imx2_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&imx2_wdt_miscdev);
+
+ if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
+ del_timer_sync(&imx2_wdt.timer);
+
+ dev_crit(imx2_wdt_miscdev.parent,
+ "Device removed: Expect reboot!\n");
+ } else
+ clk_put(imx2_wdt.clk);
+
+ imx2_wdt_miscdev.parent = NULL;
+ return 0;
+}
+
+static void imx2_wdt_shutdown(struct platform_device *pdev)
+{
+ if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) {
+ /* we are running, we need to delete the timer but will give
+ * max timeout before reboot will take place */
+ del_timer_sync(&imx2_wdt.timer);
+ imx2_wdt_set_timeout(IMX2_WDT_MAX_TIME);
+ imx2_wdt_ping();
+
+ dev_crit(imx2_wdt_miscdev.parent,
+ "Device shutdown: Expect reboot!\n");
+ }
+}
+
+static struct platform_driver imx2_wdt_driver = {
+ .probe = imx2_wdt_probe,
+ .remove = __exit_p(imx2_wdt_remove),
+ .shutdown = imx2_wdt_shutdown,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init imx2_wdt_init(void)
+{
+ return platform_driver_probe(&imx2_wdt_driver, imx2_wdt_probe);
+}
+module_init(imx2_wdt_init);
+
+static void __exit imx2_wdt_exit(void)
+{
+ platform_driver_unregister(&imx2_wdt_driver);
+}
+module_exit(imx2_wdt_exit);
+
+MODULE_AUTHOR("Wolfram Sang");
+MODULE_DESCRIPTION("Watchdog driver for IMX2 and later");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRIVER_NAME);
static u16 timeout = 0xffff;
module_param(timeout, ushort, 0);
MODULE_PARM_DESC(timeout,
- "Watchdog timeout in ticks. (0<timeout<65536, default=65535");
+ "Watchdog timeout in ticks. (0<timeout<65536, default=65535)");
static int reset = 1;
module_param(reset, bool, 0);
#define WDTO 0x11 /* Watchdog timeout register */
#define WDCFG 0x12 /* Watchdog config register */
-static int io = 0x2E; /* Address used on Portwell Boards */
+#define IO_DEFAULT 0x2E /* Address used on Portwell Boards */
+
+static int io = IO_DEFAULT;
static int timeout = DEFAULT_TIMEOUT; /* timeout value */
static unsigned long timer_enabled; /* is the timer enabled? */
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(io, int, 0);
-MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ").");
+MODULE_PARM_DESC(io, MODNAME " I/O port (default: "
+ __MODULE_STRING(IO_DEFAULT) ").");
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in minutes (default="
- __MODULE_STRING(timeout) ").");
+ __MODULE_STRING(DEFAULT_TIMEOUT) ").");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
#define PFX "pnx833x: "
#define WATCHDOG_TIMEOUT 30 /* 30 sec Maximum timeout */
#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
+#define PNX_WATCHDOG_TIMEOUT (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY)
+#define PNX_TIMEOUT_VALUE 2040000000U
/** CONFIG block */
#define PNX833X_CONFIG (0x07000U)
static int pnx833x_wdt_alive;
/* Set default timeout in MHZ.*/
-static int pnx833x_wdt_timeout = (WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY);
+static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT;
module_param(pnx833x_wdt_timeout, int, 0);
MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
- __MODULE_STRING(pnx833x_wdt_timeout) "(30 seconds).");
+ __MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds).");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static int start_enabled = 1;
+#define START_DEFAULT 1
+static int start_enabled = START_DEFAULT;
module_param(start_enabled, int, 0);
MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
- "(default=" __MODULE_STRING(start_enabled) ")");
+ "(default=" __MODULE_STRING(START_DEFAULT) ")");
static void pnx833x_wdt_start(void)
{
module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default="
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
MODULE_PARM_DESC(tmr_atboot,
"Watchdog is started at boot time if set to 1, default="
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
- "0 to reboot (default depends on ONLY_TESTING)");
-MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
+ "0 to reboot (default 0)");
+MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
static unsigned long open_lock;
static struct device *wdt_dev; /* platform device attached to */
wdt_mem = request_mem_region(res->start, size, pdev->name);
if (wdt_mem == NULL) {
dev_err(dev, "failed to get memory region\n");
- ret = -ENOENT;
- goto err_req;
+ return -EBUSY;
}
wdt_base = ioremap(res->start, size);
module_param(clock_division_ratio, int, 0);
MODULE_PARM_DESC(clock_division_ratio,
"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
- "to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
+ "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
twl4030_wdt_dev = pdev;
+ twl4030_wdt_disable(wdt);
+
ret = misc_register(&wdt->miscdev);
if (ret) {
dev_err(wdt->miscdev.parent,
static int type = 500;
module_param(type, int, 0);
MODULE_PARM_DESC(type,
- "WDT501-P Card type (500 or 501 , default=500)");
+ "WDT501-P Card type (500 or 501, default=500)");
/*
* Programming support
static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default="
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default="
__MODULE_STRING(DEFAULT_TIMEOUT) ")");
module_param(testmode, int, 0);
MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff