save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
- locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+ locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
/* Longtime timer */
locomo_writel(0, lchip->base + LOCOMO_LTINT);
/* SPI */
- locomo_writel(0, lchip->base + LOCOMO_SPIIE);
+ locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
r = locomo_readl(lchip->base + LOCOMO_ASD);
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
- return;
+ goto out;
}
/* Send Sub address (LSB is channel select) */
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
- return;
+ goto out;
}
/* Send DAC data */
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
- return;
}
+out:
/* stop */
r = locomo_readl(mapbase + LOCOMO_DAC);
r &= ~(LOCOMO_DAC_SCLOEB);
#define UART2_BASE (APB_PHYS_BASE + 0x17000)
#define UART3_BASE (APB_PHYS_BASE + 0x18000)
-static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+static volatile unsigned long *UART;
static inline void putc(char c)
{
static inline void arch_decomp_setup(void)
{
+ /* default to UART2 */
+ UART = (unsigned long *)UART2_BASE;
+
if (machine_is_avengers_lite())
UART = (unsigned long *)UART3_BASE;
}
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
- select FB_W100
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
config SHARPSL_PM
bool
select APM_EMULATION
+ select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+ bool
+ depends on !CORGI_SSP_DEPRECATED
+ select HWMON
+ select SENSORS_MAX1111
config CORGI_SSP_DEPRECATED
bool
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- /* SPI chip select directions - all other directions should
- * be handled by drivers.*/
- gpio_direction_output(37, 0);
-
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
#define BTUART_BASE (0x40200000)
#define STUART_BASE (0x40700000)
-static unsigned long uart_base = FFUART_BASE;
-static unsigned int uart_shift = 2;
-static unsigned int uart_is_pxa = 1;
+static unsigned long uart_base;
+static unsigned int uart_shift;
+static unsigned int uart_is_pxa;
static inline unsigned char uart_read(int offset)
{
static inline void arch_decomp_setup(void)
{
+ /* initialize to default */
+ uart_base = FFUART_BASE;
+ uart_shift = 2;
+ uart_is_pxa = 1;
+
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
|| machine_is_cm_x300() || machine_is_balloon3())
#include <linux/lis3lv02d.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
#include <linux/regulator/max8660.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
.active_low = 0,
.wakeup = 0,
.debounce_interval = 5, /* ms */
- .desc = "on/off button",
+ .desc = "on_off button",
},
};
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- /* spi chip selects */
- gpio_direction_output(37, 0);
- gpio_direction_output(24, 0);
- gpio_direction_output(39, 0);
-
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
/*
* Map LCD controller registers.
*/
- fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+ fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
if (fbi->reg_base == NULL) {
ret = -ENOMEM;
goto failed;