fbdev: kconfig update

Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers.

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b218ac5..e63e564 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -254,16 +254,24 @@ config FB_PM2
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        help
-         This is the frame buffer device driver for the Permedia2 AGP frame
-         buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
-         product page at
-         <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
+         This is the frame buffer device driver for cards based on
+         the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+         The driver was tested on the following cards:
+               Diamond FireGL 1000 PRO AGP
+               ELSA Gloria Synergy PCI
+               Appian Jeronimo PRO (both heads) PCI
+               3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+               Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+               ASK Graphic Blaster Exxtreme AGP
+
+         To compile this driver as a module, choose M here: the
+         module will be called pm2fb.
 
 config FB_PM2_FIFO_DISCONNECT
        bool "enable FIFO disconnect feature"
        depends on FB_PM2 && PCI
        help
-         Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
+         Support the Permedia2 FIFO disconnect feature.
 
 config FB_ARMCLCD
        tristate "ARM PrimeCell PL110 support"
@@ -1539,25 +1547,25 @@ config FB_KYRO
          module will be called kyrofb.
 
 config FB_3DFX
-       tristate "3Dfx Banshee/Voodoo3 display support"
+       tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
        depends on FB && PCI
        select FB_CFB_IMAGEBLIT
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        help
-         This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
-         chips. Say Y if you have such a graphics board.
+         This driver supports graphics boards with the 3Dfx Banshee,
+         Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+         such a graphics board.
 
          To compile this driver as a module, choose M here: the
          module will be called tdfxfb.
 
 config FB_3DFX_ACCEL
-       bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+       bool "3Dfx Acceleration functions (EXPERIMENTAL)"
        depends on FB_3DFX && EXPERIMENTAL
        ---help---
-       This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
-       with acceleration functions.
-
+       This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+       device driver with acceleration functions.
 
 config FB_VOODOO1
        tristate "3Dfx Voodoo Graphics (sst1) support"
@@ -1622,17 +1630,16 @@ config FB_TRIDENT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
        ---help---
-         This driver is supposed to support graphics boards with the
-         Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
+         This is the frame buffer device driver for Trident PCI/AGP chipsets.
+         Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+         and Blade XP.
+         There are also integrated versions of these chips called CyberXXXX,
+         CyberImage or CyberBlade. These chips are mostly found in laptops
          but also on some motherboards. For more information, read
          <file:Documentation/fb/tridentfb.txt>
 
-         Cyberblade/i1 support will be removed soon, use the cyblafb driver
-         instead.
-
          Say Y if you have such a graphics board.
 
-
          To compile this driver as a module, choose M here: the
          module will be called tridentfb.