[SCSI] sym53c8xx: Simplify DAC DMA handling
authorMatthew Wilcox <matthew@wil.cx>
Fri, 5 Oct 2007 19:55:09 +0000 (15:55 -0400)
committerJames Bottomley <jejb@mulgrave.localdomain>
Tue, 23 Oct 2007 19:12:36 +0000 (15:12 -0400)
By introducing the use_dac(), set_dac() and DMA_DAC_MASK macros, we can
eliminate a lot of ifdefs from the code.  We now rely on the compiler to
optimise away a few things that we'd formerly relied on the preprocessor
to do.  This makes sym_setup_bus_dma_mask() small enough to inline into
its only caller.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/sym53c8xx_2/sym_fw.c
drivers/scsi/sym53c8xx_2/sym_glue.c
drivers/scsi/sym53c8xx_2/sym_hipd.c
drivers/scsi/sym53c8xx_2/sym_hipd.h

index 3d4db80..aa230d2 100644 (file)
@@ -167,7 +167,7 @@ sym_fw2_patch(struct sym_hcb *np)
         *  Remove useless 64 bit DMA specific SCRIPTS, 
         *  when this feature is not available.
         */
-       if (!np->use_dac) {
+       if (!use_dac(np)) {
                scripta0->is_dmap_dirty[0] = cpu_to_scr(SCR_NO_OP);
                scripta0->is_dmap_dirty[1] = 0;
                scripta0->is_dmap_dirty[2] = cpu_to_scr(SCR_NO_OP);
index c1d9f69..5501297 100644 (file)
@@ -1265,31 +1265,6 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev)
 }
 
 /*
- *  Ask/tell the system about DMA addressing.
- */
-static int sym_setup_bus_dma_mask(struct sym_hcb *np)
-{
-#if SYM_CONF_DMA_ADDRESSING_MODE > 0
-#if   SYM_CONF_DMA_ADDRESSING_MODE == 1
-#define        DMA_DAC_MASK    DMA_40BIT_MASK
-#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
-#define        DMA_DAC_MASK    DMA_64BIT_MASK
-#endif
-       if ((np->features & FE_DAC) &&
-                       !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) {
-               np->use_dac = 1;
-               return 0;
-       }
-#endif
-
-       if (!pci_set_dma_mask(np->s.device, DMA_32BIT_MASK))
-               return 0;
-
-       printf_warning("%s: No suitable DMA available\n", sym_name(np));
-       return -1;
-}
-
-/*
  *  Host attach and initialisations.
  *
  *  Allocate host data and ncb structure.
@@ -1362,8 +1337,13 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
        strlcpy(np->s.chip_name, dev->chip.name, sizeof(np->s.chip_name));
        sprintf(np->s.inst_name, "sym%d", np->s.unit);
 
-       if (sym_setup_bus_dma_mask(np))
+       if ((SYM_CONF_DMA_ADDRESSING_MODE > 0) && (np->features & FE_DAC) &&
+                       !pci_set_dma_mask(np->s.device, DMA_DAC_MASK)) {
+               set_dac(np);
+       } else if (pci_set_dma_mask(np->s.device, DMA_32BIT_MASK)) {
+               printf_warning("%s: No suitable DMA available\n", sym_name(np));
                goto attach_failed;
+       }
 
        /*
         *  Try to map the controller chip to
index 39f84bb..5d0d356 100644 (file)
@@ -778,19 +778,12 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
         *  64 bit addressing  (895A/896/1010) ?
         */
        if (np->features & FE_DAC) {
-#if   SYM_CONF_DMA_ADDRESSING_MODE == 0
-               np->rv_ccntl1   |= (DDAC);
-#elif SYM_CONF_DMA_ADDRESSING_MODE == 1
-               if (!np->use_dac)
-                       np->rv_ccntl1   |= (DDAC);
-               else
-                       np->rv_ccntl1   |= (XTIMOD | EXTIBMV);
-#elif SYM_CONF_DMA_ADDRESSING_MODE == 2
-               if (!np->use_dac)
-                       np->rv_ccntl1   |= (DDAC);
-               else
-                       np->rv_ccntl1   |= (0 | EXTIBMV);
-#endif
+               if (!use_dac(np))
+                       np->rv_ccntl1 |= (DDAC);
+               else if (SYM_CONF_DMA_ADDRESSING_MODE == 1)
+                       np->rv_ccntl1 |= (XTIMOD | EXTIBMV);
+               else if (SYM_CONF_DMA_ADDRESSING_MODE == 2)
+                       np->rv_ccntl1 |= (0 | EXTIBMV);
        }
 
        /*
@@ -1322,7 +1315,7 @@ int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s)
 {
        int i;
 
-       if (!np->use_dac)
+       if (!use_dac(np))
                goto weird;
 
        /* Look up existing mappings */
@@ -1837,7 +1830,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
         *  Set up scratch C and DRS IO registers to map the 32 bit 
         *  DMA address range our data structures are located in.
         */
-       if (np->use_dac) {
+       if (use_dac(np)) {
                np->dmap_bah[0] = 0;    /* ??? */
                OUTL(np, nc_scrx[0], np->dmap_bah[0]);
                OUTL(np, nc_drs, np->dmap_bah[0]);
index f76b27f..4354571 100644 (file)
@@ -1026,6 +1026,14 @@ struct sym_hcb {
 #endif
 };
 
+#if SYM_CONF_DMA_ADDRESSING_MODE == 0
+#define use_dac(np)    0
+#define set_dac(np)    do { } while (0)
+#else
+#define use_dac(np)    (np)->use_dac
+#define set_dac(np)    (np)->use_dac = 1
+#endif
+
 #define HCB_BA(np, lbl)        (np->hcb_ba + offsetof(struct sym_hcb, lbl))
 
 
@@ -1068,18 +1076,21 @@ int sym_hcb_attach(struct Scsi_Host *shost, struct sym_fw *fw, struct sym_nvram
  */
 
 #if   SYM_CONF_DMA_ADDRESSING_MODE == 0
+#define DMA_DAC_MASK   DMA_32BIT_MASK
 #define sym_build_sge(np, data, badd, len)     \
 do {                                           \
        (data)->addr = cpu_to_scr(badd);        \
        (data)->size = cpu_to_scr(len);         \
 } while (0)
 #elif SYM_CONF_DMA_ADDRESSING_MODE == 1
+#define DMA_DAC_MASK   DMA_40BIT_MASK
 #define sym_build_sge(np, data, badd, len)                             \
 do {                                                                   \
        (data)->addr = cpu_to_scr(badd);                                \
        (data)->size = cpu_to_scr((((badd) >> 8) & 0xff000000) + len);  \
 } while (0)
 #elif SYM_CONF_DMA_ADDRESSING_MODE == 2
+#define DMA_DAC_MASK   DMA_64BIT_MASK
 int sym_lookup_dmap(struct sym_hcb *np, u32 h, int s);
 static __inline void 
 sym_build_sge(struct sym_hcb *np, struct sym_tblmove *data, u64 badd, int len)