Blackfin: bf533-ezkit: add resources for FISP devices

The BF533-EZKIT has two Flash In-System Programming devices hooked up to
the async memory bus, so add resources for the primary flashes and the
SRAMs on the devices.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 89a5ec4..4e3e511 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+static const char *map_probes[] = {
+       "stm_flash",
+       NULL,
+};
+
+static struct platdata_mtd_ram stm_pri_data_a = {
+       .mapname    = "Flash A Primary",
+       .map_probes = map_probes,
+       .bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_a = {
+       .start = 0x20000000,
+       .end   = 0x200fffff,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_a = {
+       .name          = "mtd-ram",
+       .id            = 0,
+       .dev = {
+               .platform_data = &stm_pri_data_a,
+       },
+       .num_resources = 1,
+       .resource      = &stm_pri_resource_a,
+};
+
+static struct platdata_mtd_ram stm_pri_data_b = {
+       .mapname    = "Flash B Primary",
+       .map_probes = map_probes,
+       .bankwidth  = 2,
+};
+
+static struct resource stm_pri_resource_b = {
+       .start = 0x20100000,
+       .end   = 0x201fffff,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_b = {
+       .name          = "mtd-ram",
+       .id            = 4,
+       .dev = {
+               .platform_data = &stm_pri_data_b,
+       },
+       .num_resources = 1,
+       .resource      = &stm_pri_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram sram_data_a = {
+       .mapname   = "Flash A SRAM",
+       .bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+       .start = 0x20240000,
+       .end   = 0x2024ffff,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+       .name          = "mtd-ram",
+       .id            = 8,
+       .dev = {
+               .platform_data = &sram_data_a,
+       },
+       .num_resources = 1,
+       .resource      = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+       .mapname   = "Flash B SRAM",
+       .bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+       .start = 0x202c0000,
+       .end   = 0x202cffff,
+       .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+       .name          = "mtd-ram",
+       .id            = 9,
+       .dev = {
+               .platform_data = &sram_data_b,
+       },
+       .num_resources = 1,
+       .resource      = &sram_resource_b,
+};
+#endif
+
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
        {
@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = {
 
        &bfin_dpmc,
 
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+       &stm_pri_device_a,
+       &stm_pri_device_b,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+       &sram_device_a,
+       &sram_device_b,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
        &smc91x_device,
 #endif