if (is_handle_aborted(handle))
return;
- printk(KERN_ERR "%s: aborting transaction: %s in %s\n",
- caller, errstr, err_fn);
+ printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n",
+ caller, errstr, err_fn);
journal_abort_handle(handle);
}
+void ext3_msg(struct super_block *sb, const char *prefix,
+ const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+ printk("%sEXT3-fs (%s): ", prefix, sb->s_id);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
+}
+
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
*
journal_abort(journal, -EIO);
}
if (test_opt (sb, ERRORS_RO)) {
- printk (KERN_CRIT "Remounting filesystem read-only\n");
+ ext3_msg(sb, KERN_CRIT,
+ "error: remounting filesystem read-only");
sb->s_flags |= MS_RDONLY;
}
ext3_commit_super(sb, es, 1);
if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs (device %s): panic forced after error\n",
+ panic("EXT3-fs (%s): panic forced after error\n",
sb->s_id);
}
return;
errstr = ext3_decode_error(sb, errno, nbuf);
- printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
- sb->s_id, function, errstr);
+ ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr);
ext3_handle_error(sb);
}
{
va_list args;
- printk (KERN_CRIT "ext3_abort called.\n");
-
va_start(args, fmt);
- printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+ printk(KERN_CRIT "EXT3-fs (%s): error: %s: ", sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs panic from previous error\n");
+ panic("EXT3-fs: panic from previous error\n");
if (sb->s_flags & MS_RDONLY)
return;
- printk(KERN_CRIT "Remounting filesystem read-only\n");
+ ext3_msg(sb, KERN_CRIT,
+ "error: remounting filesystem read-only");
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
va_list args;
va_start(args, fmt);
- printk(KERN_WARNING "EXT3-fs warning (device %s): %s: ",
+ printk(KERN_WARNING "EXT3-fs (%s): warning: %s: ",
sb->s_id, function);
vprintk(fmt, args);
printk("\n");
if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
return;
- ext3_warning(sb, __func__,
- "updating to rev %d because of new feature flag, "
- "running e2fsck is recommended",
- EXT3_DYNAMIC_REV);
+ ext3_msg(sb, KERN_WARNING,
+ "warning: updating to rev %d because of "
+ "new feature flag, running e2fsck is recommended",
+ EXT3_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
/*
* Open the external journal device
*/
-static struct block_device *ext3_blkdev_get(dev_t dev)
+static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb)
{
struct block_device *bdev;
char b[BDEVNAME_SIZE];
return bdev;
fail:
- printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n",
- __bdevname(dev, b), PTR_ERR(bdev));
+ ext3_msg(sb, "error: failed to open journal device %s: %ld",
+ __bdevname(dev, b), PTR_ERR(bdev));
+
return NULL;
}
{
struct list_head *l;
- printk(KERN_ERR "sb orphan head is %d\n",
+ ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d",
le32_to_cpu(sbi->s_es->s_last_orphan));
- printk(KERN_ERR "sb_info orphan list:\n");
+ ext3_msg(sb, KERN_ERR, "sb_info orphan list:");
list_for_each(l, &sbi->s_orphan) {
struct inode *inode = orphan_list_entry(l);
- printk(KERN_ERR " "
+ ext3_msg(sb, KERN_ERR, " "
"inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
inode->i_mode, inode->i_nlink,
{Opt_err, NULL},
};
-static ext3_fsblk_t get_sb_block(void **data)
+static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb)
{
ext3_fsblk_t sb_block;
char *options = (char *) *data;
/*todo: use simple_strtoll with >32bit ext3 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
- printk("EXT3-fs: Invalid sb specification: %s\n",
+ ext3_msg(sb, "error: invalid sb specification: %s",
(char *) *data);
return 1;
}
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
- printk("EXT3 (no)user_xattr options not supported\n");
+ ext3_msg(sb, KERN_INFO,
+ "(no)user_xattr options not supported");
break;
#endif
#ifdef CONFIG_EXT3_FS_POSIX_ACL
#else
case Opt_acl:
case Opt_noacl:
- printk("EXT3 (no)acl options not supported\n");
+ ext3_msg(sb, KERN_INFO,
+ "(no)acl options not supported");
break;
#endif
case Opt_reservation:
user to specify an existing inode to be the
journal file. */
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
break;
case Opt_journal_inum:
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
if (match_int(&args[0], &option))
break;
case Opt_journal_dev:
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
if (match_int(&args[0], &option))
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
== data_opt)
break;
- printk(KERN_ERR
- "EXT3-fs (device %s): Cannot change "
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot change "
"data mode on remount. The filesystem "
"is mounted in data=%s mode and you "
- "try to remount it in data=%s mode.\n",
- sb->s_id,
+ "try to remount it in data=%s mode.",
data_mode_string(sbi->s_mount_opt &
EXT3_MOUNT_DATA_FLAGS),
data_mode_string(data_opt));
set_qf_name:
if (sb_any_quota_loaded(sb) &&
!sbi->s_qf_names[qtype]) {
- printk(KERN_ERR
- "EXT3-fs: Cannot change journaled "
- "quota options when quota turned on.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot change journaled "
+ "quota options when quota turned on.");
return 0;
}
qname = match_strdup(&args[0]);
if (!qname) {
- printk(KERN_ERR
- "EXT3-fs: not enough memory for "
- "storing quotafile name.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: not enough memory for "
+ "storing quotafile name.");
return 0;
}
if (sbi->s_qf_names[qtype] &&
strcmp(sbi->s_qf_names[qtype], qname)) {
- printk(KERN_ERR
- "EXT3-fs: %s quota file already "
- "specified.\n", QTYPE2NAME(qtype));
+ ext3_msg(sb, KERN_ERR,
+ "error: %s quota file already "
+ "specified.", QTYPE2NAME(qtype));
kfree(qname);
return 0;
}
sbi->s_qf_names[qtype] = qname;
if (strchr(sbi->s_qf_names[qtype], '/')) {
- printk(KERN_ERR
- "EXT3-fs: quotafile must be on "
- "filesystem root.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: quotafile must be on "
+ "filesystem root.");
kfree(sbi->s_qf_names[qtype]);
sbi->s_qf_names[qtype] = NULL;
return 0;
clear_qf_name:
if (sb_any_quota_loaded(sb) &&
sbi->s_qf_names[qtype]) {
- printk(KERN_ERR "EXT3-fs: Cannot change "
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
"journaled quota options when "
- "quota turned on.\n");
+ "quota turned on.");
return 0;
}
/*
set_qf_format:
if (sb_any_quota_loaded(sb) &&
sbi->s_jquota_fmt != qfmt) {
- printk(KERN_ERR "EXT3-fs: Cannot change "
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
"journaled quota options when "
- "quota turned on.\n");
+ "quota turned on.");
return 0;
}
sbi->s_jquota_fmt = qfmt;
break;
case Opt_noquota:
if (sb_any_quota_loaded(sb)) {
- printk(KERN_ERR "EXT3-fs: Cannot change quota "
- "options when quota turned on.\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
+ "quota options when quota turned on.");
return 0;
}
clear_opt(sbi->s_mount_opt, QUOTA);
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
- printk(KERN_ERR
- "EXT3-fs: quota options not supported.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: quota options not supported.");
break;
case Opt_usrjquota:
case Opt_grpjquota:
case Opt_offgrpjquota:
case Opt_jqfmt_vfsold:
case Opt_jqfmt_vfsv0:
- printk(KERN_ERR
- "EXT3-fs: journaled quota options not "
- "supported.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: journaled quota options not "
+ "supported.");
break;
case Opt_noquota:
break;
break;
case Opt_resize:
if (!is_remount) {
- printk("EXT3-fs: resize option only available "
- "for remount\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: resize option only available "
+ "for remount");
return 0;
}
if (match_int(&args[0], &option) != 0)
clear_opt(sbi->s_mount_opt, NOBH);
break;
default:
- printk (KERN_ERR
- "EXT3-fs: Unrecognized mount option \"%s\" "
- "or missing value\n", p);
+ ext3_msg(sb, KERN_ERR,
+ "error: unrecognized mount option \"%s\" "
+ "or missing value", p);
return 0;
}
}
(sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)) ||
(sbi->s_qf_names[GRPQUOTA] &&
(sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA))) {
- printk(KERN_ERR "EXT3-fs: old and new quota "
- "format mixing.\n");
+ ext3_msg(sb, KERN_ERR, "error: old and new quota "
+ "format mixing.");
return 0;
}
if (!sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT3-fs: journaled quota format "
- "not specified.\n");
+ ext3_msg(sb, KERN_ERR, "error: journaled quota format "
+ "not specified.");
return 0;
}
} else {
if (sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT3-fs: journaled quota format "
+ ext3_msg(sb, KERN_ERR, "error: journaled quota format "
"specified with no journaling "
- "enabled.\n");
+ "enabled.");
return 0;
}
}
int res = 0;
if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
- printk (KERN_ERR "EXT3-fs warning: revision level too high, "
- "forcing read-only mode\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: revision level too high, "
+ "forcing read-only mode");
res = MS_RDONLY;
}
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT3_VALID_FS))
- printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: mounting unchecked fs, "
+ "running e2fsck is recommended");
else if ((sbi->s_mount_state & EXT3_ERROR_FS))
- printk (KERN_WARNING
- "EXT3-fs warning: mounting fs with errors, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: mounting fs with errors, "
+ "running e2fsck is recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
- printk (KERN_WARNING
- "EXT3-fs warning: maximal mount count reached, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: maximal mount count reached, "
+ "running e2fsck is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
- printk (KERN_WARNING
- "EXT3-fs warning: checktime reached, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: checktime reached, "
+ "running e2fsck is recommended");
#if 0
/* @@@ We _will_ want to clear the valid bit if we find
inconsistencies, to force a fsck at reboot. But for
ext3_commit_super(sb, es, 1);
if (test_opt(sb, DEBUG))
- printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, "
- "bpg=%lu, ipg=%lu, mo=%04lx]\n",
+ ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, "
+ "bpg=%lu, ipg=%lu, mo=%04lx]",
sb->s_blocksize,
sbi->s_groups_count,
EXT3_BLOCKS_PER_GROUP(sb),
EXT3_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
- printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id);
if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
char b[BDEVNAME_SIZE];
-
- printk("external journal on %s\n",
+ ext3_msg(sb, KERN_INFO, "using external journal on %s",
bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
} else {
- printk("internal journal\n");
+ ext3_msg(sb, KERN_INFO, "using internal journal");
}
return res;
}
}
if (bdev_read_only(sb->s_bdev)) {
- printk(KERN_ERR "EXT3-fs: write access "
- "unavailable, skipping orphan cleanup.\n");
+ ext3_msg(sb, KERN_ERR, "error: write access "
+ "unavailable, skipping orphan cleanup.");
return;
}
}
if (s_flags & MS_RDONLY) {
- printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n",
- sb->s_id);
+ ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
sb->s_flags &= ~MS_RDONLY;
}
#ifdef CONFIG_QUOTA
if (EXT3_SB(sb)->s_qf_names[i]) {
int ret = ext3_quota_on_mount(sb, i);
if (ret < 0)
- printk(KERN_ERR
- "EXT3-fs: Cannot turn on journaled "
- "quota: error %d\n", ret);
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot turn on journaled "
+ "quota: %d", ret);
}
}
#endif
#define PLURAL(x) (x), ((x)==1) ? "" : "s"
if (nr_orphans)
- printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n",
- sb->s_id, PLURAL(nr_orphans));
+ ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
+ PLURAL(nr_orphans));
if (nr_truncates)
- printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n",
- sb->s_id, PLURAL(nr_truncates));
+ ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
+ PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
struct ext3_super_block *es = NULL;
struct ext3_sb_info *sbi;
ext3_fsblk_t block;
- ext3_fsblk_t sb_block = get_sb_block(&data);
+ ext3_fsblk_t sb_block = get_sb_block(&data, sb);
ext3_fsblk_t logic_sb_block;
unsigned long offset = 0;
unsigned int journal_inum = 0;
blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
if (!blocksize) {
- printk(KERN_ERR "EXT3-fs: unable to set blocksize\n");
+ ext3_msg(sb, KERN_ERR, "error: unable to set blocksize");
goto out_fail;
}
}
if (!(bh = sb_bread(sb, logic_sb_block))) {
- printk (KERN_ERR "EXT3-fs: unable to read superblock\n");
+ ext3_msg(sb, KERN_ERR, "error: unable to read superblock");
goto out_fail;
}
/*
(EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
- "EXT3-fs warning: feature flags set on rev 0 fs, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: feature flags set on rev 0 fs, "
+ "running e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
*/
features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP);
if (features) {
- printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
- "unsupported optional features (%x).\n",
- sb->s_id, le32_to_cpu(features));
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount because of unsupported "
+ "optional features (%x)", le32_to_cpu(features));
goto failed_mount;
}
features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP);
if (!(sb->s_flags & MS_RDONLY) && features) {
- printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
- "unsupported optional features (%x).\n",
- sb->s_id, le32_to_cpu(features));
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount RDWR because of unsupported "
+ "optional features (%x)", le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
if (blocksize < EXT3_MIN_BLOCK_SIZE ||
blocksize > EXT3_MAX_BLOCK_SIZE) {
- printk(KERN_ERR
- "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
- blocksize, sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount because of unsupported "
+ "filesystem blocksize %d", blocksize);
goto failed_mount;
}
* than the hardware sectorsize for the machine.
*/
if (blocksize < hblock) {
- printk(KERN_ERR "EXT3-fs: blocksize %d too small for "
- "device blocksize %d.\n", blocksize, hblock);
+ ext3_msg(sb, KERN_ERR,
+ "error: fsblocksize %d too small for "
+ "hardware sectorsize %d", blocksize, hblock);
goto failed_mount;
}
brelse (bh);
if (!sb_set_blocksize(sb, blocksize)) {
- printk(KERN_ERR "EXT3-fs: bad blocksize %d.\n",
- blocksize);
+ ext3_msg(sb, KERN_ERR,
+ "error: bad blocksize %d", blocksize);
goto out_fail;
}
logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
bh = sb_bread(sb, logic_sb_block);
if (!bh) {
- printk(KERN_ERR
- "EXT3-fs: Can't read superblock on 2nd try.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: can't read superblock on 2nd try");
goto failed_mount;
}
es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
- printk (KERN_ERR
- "EXT3-fs: Magic mismatch, very weird !\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: magic mismatch");
goto failed_mount;
}
}
if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
(!is_power_of_2(sbi->s_inode_size)) ||
(sbi->s_inode_size > blocksize)) {
- printk (KERN_ERR
- "EXT3-fs: unsupported inode size: %d\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: unsupported inode size: %d",
sbi->s_inode_size);
goto failed_mount;
}
sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
le32_to_cpu(es->s_log_frag_size);
if (blocksize != sbi->s_frag_size) {
- printk(KERN_ERR
- "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: fragsize %lu != blocksize %u (unsupported)",
sbi->s_frag_size, blocksize);
goto failed_mount;
}
}
if (sbi->s_blocks_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #blocks per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "#blocks per group too big: %lu",
sbi->s_blocks_per_group);
goto failed_mount;
}
if (sbi->s_frags_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #fragments per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: #fragments per group too big: %lu",
sbi->s_frags_per_group);
goto failed_mount;
}
if (sbi->s_inodes_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #inodes per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: #inodes per group too big: %lu",
sbi->s_inodes_per_group);
goto failed_mount;
}
if (le32_to_cpu(es->s_blocks_count) >
(sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
- printk(KERN_ERR "EXT3-fs: filesystem on %s:"
- " too large to mount safely\n", sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: filesystem is too large to mount safely");
if (sizeof(sector_t) < 8)
- printk(KERN_WARNING "EXT3-fs: CONFIG_LBDAF not "
- "enabled\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: CONFIG_LBDAF not enabled");
goto failed_mount;
}
sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
- printk (KERN_ERR "EXT3-fs: not enough memory\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: not enough memory");
goto failed_mount;
}
block = descriptor_loc(sb, logic_sb_block, i);
sbi->s_group_desc[i] = sb_bread(sb, block);
if (!sbi->s_group_desc[i]) {
- printk (KERN_ERR "EXT3-fs: "
- "can't read group descriptor %d\n", i);
+ ext3_msg(sb, KERN_ERR,
+ "error: can't read group descriptor %d", i);
db_count = i;
goto failed_mount2;
}
}
if (!ext3_check_descriptors (sb)) {
- printk(KERN_ERR "EXT3-fs: group descriptors corrupted!\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: group descriptors corrupted");
goto failed_mount2;
}
sbi->s_gdb_count = db_count;
ext3_count_dirs(sb));
}
if (err) {
- printk(KERN_ERR "EXT3-fs: insufficient memory\n");
+ ext3_msg(sb, KERN_ERR, "error: insufficient memory");
goto failed_mount3;
}
goto failed_mount3;
} else {
if (!silent)
- printk (KERN_ERR
- "ext3: No journal on filesystem on %s\n",
- sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: no journal found. "
+ "mounting ext3 over ext2?");
goto failed_mount3;
}
case EXT3_MOUNT_WRITEBACK_DATA:
if (!journal_check_available_features
(sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
- printk(KERN_ERR "EXT3-fs: Journal does not support "
- "requested data journaling mode\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: journal does not support "
+ "requested data journaling mode");
goto failed_mount4;
}
default:
if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) {
- printk(KERN_WARNING "EXT3-fs: Ignoring nobh option - "
- "its supported only with writeback mode\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: ignoring nobh option - "
+ "it is supported only with writeback mode");
clear_opt(sbi->s_mount_opt, NOBH);
}
}
root = ext3_iget(sb, EXT3_ROOT_INO);
if (IS_ERR(root)) {
- printk(KERN_ERR "EXT3-fs: get root inode failed\n");
+ ext3_msg(sb, KERN_ERR, "error: get root inode failed");
ret = PTR_ERR(root);
goto failed_mount4;
}
if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
iput(root);
- printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
+ ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck");
goto failed_mount4;
}
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
- printk(KERN_ERR "EXT3-fs: get root dentry failed\n");
+ ext3_msg(sb, KERN_ERR, "error: get root dentry failed");
iput(root);
ret = -ENOMEM;
goto failed_mount4;
ext3_orphan_cleanup(sb, es);
EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
if (needs_recovery)
- printk (KERN_INFO "EXT3-fs: recovery complete.\n");
+ ext3_msg(sb, KERN_INFO, "recovery complete");
ext3_mark_recovery_complete(sb, es);
- printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
+ ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode",
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
"writeback");
cantfind_ext3:
if (!silent)
- printk(KERN_ERR "VFS: Can't find ext3 filesystem on dev %s.\n",
+ ext3_msg(sb, KERN_INFO,
+ "error: can't find ext3 filesystem on dev %s.",
sb->s_id);
goto failed_mount;
journal_inode = ext3_iget(sb, journal_inum);
if (IS_ERR(journal_inode)) {
- printk(KERN_ERR "EXT3-fs: no journal found.\n");
+ ext3_msg(sb, KERN_ERR, "error: no journal found");
return NULL;
}
if (!journal_inode->i_nlink) {
make_bad_inode(journal_inode);
iput(journal_inode);
- printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n");
+ ext3_msg(sb, KERN_ERR, "error: journal inode is deleted");
return NULL;
}
jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
journal_inode, journal_inode->i_size);
if (!S_ISREG(journal_inode->i_mode)) {
- printk(KERN_ERR "EXT3-fs: invalid journal inode.\n");
+ ext3_msg(sb, KERN_ERR, "error: invalid journal inode");
iput(journal_inode);
return NULL;
}
journal = journal_init_inode(journal_inode);
if (!journal) {
- printk(KERN_ERR "EXT3-fs: Could not load journal inode\n");
+ ext3_msg(sb, KERN_ERR, "error: could not load journal inode");
iput(journal_inode);
return NULL;
}
struct ext3_super_block * es;
struct block_device *bdev;
- bdev = ext3_blkdev_get(j_dev);
+ bdev = ext3_blkdev_get(j_dev, sb);
if (bdev == NULL)
return NULL;
if (bd_claim(bdev, sb)) {
- printk(KERN_ERR
- "EXT3: failed to claim external journal device.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: failed to claim external journal device");
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
return NULL;
}
blocksize = sb->s_blocksize;
hblock = bdev_logical_block_size(bdev);
if (blocksize < hblock) {
- printk(KERN_ERR
- "EXT3-fs: blocksize too small for journal device.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: blocksize too small for journal device");
goto out_bdev;
}
offset = EXT3_MIN_BLOCK_SIZE % blocksize;
set_blocksize(bdev, blocksize);
if (!(bh = __bread(bdev, sb_block, blocksize))) {
- printk(KERN_ERR "EXT3-fs: couldn't read superblock of "
- "external journal\n");
+ ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of "
+ "external journal");
goto out_bdev;
}
if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
!(le32_to_cpu(es->s_feature_incompat) &
EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
- printk(KERN_ERR "EXT3-fs: external journal has "
- "bad superblock\n");
+ ext3_msg(sb, KERN_ERR, "error: external journal has "
+ "bad superblock");
brelse(bh);
goto out_bdev;
}
if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
- printk(KERN_ERR "EXT3-fs: journal UUID does not match\n");
+ ext3_msg(sb, KERN_ERR, "error: journal UUID does not match");
brelse(bh);
goto out_bdev;
}
journal = journal_init_dev(bdev, sb->s_bdev,
start, len, blocksize);
if (!journal) {
- printk(KERN_ERR "EXT3-fs: failed to create device journal\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: failed to create device journal");
goto out_bdev;
}
journal->j_private = sb;
ll_rw_block(READ, 1, &journal->j_sb_buffer);
wait_on_buffer(journal->j_sb_buffer);
if (!buffer_uptodate(journal->j_sb_buffer)) {
- printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
+ ext3_msg(sb, KERN_ERR, "I/O error on journal device");
goto out_journal;
}
if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
- printk(KERN_ERR "EXT3-fs: External journal has more than one "
- "user (unsupported) - %d\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: external journal has more than one "
+ "user (unsupported) - %d",
be32_to_cpu(journal->j_superblock->s_nr_users));
goto out_journal;
}
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
- printk(KERN_INFO "EXT3-fs: external journal device major/minor "
- "numbers have changed\n");
+ ext3_msg(sb, KERN_INFO, "external journal device major/minor "
+ "numbers have changed");
journal_dev = new_decode_dev(journal_devnum);
} else
journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
if (sb->s_flags & MS_RDONLY) {
- printk(KERN_INFO "EXT3-fs: INFO: recovery "
- "required on readonly filesystem.\n");
+ ext3_msg(sb, KERN_INFO,
+ "recovery required on readonly filesystem");
if (really_read_only) {
- printk(KERN_ERR "EXT3-fs: write access "
- "unavailable, cannot proceed.\n");
+ ext3_msg(sb, KERN_ERR, "error: write access "
+ "unavailable, cannot proceed");
return -EROFS;
}
- printk (KERN_INFO "EXT3-fs: write access will "
- "be enabled during recovery.\n");
+ ext3_msg(sb, KERN_INFO,
+ "write access will be enabled during recovery");
}
}
if (journal_inum && journal_dev) {
- printk(KERN_ERR "EXT3-fs: filesystem has both journal "
- "and inode journals!\n");
+ ext3_msg(sb, KERN_ERR, "error: filesystem has both journal "
+ "and inode journals");
return -EINVAL;
}
if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
err = journal_update_format(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error updating journal.\n");
+ ext3_msg(sb, KERN_ERR, "error updating journal");
journal_destroy(journal);
return err;
}
err = journal_load(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error loading journal.\n");
+ ext3_msg(sb, KERN_ERR, "error loading journal");
journal_destroy(journal);
return err;
}
return 0;
}
-static int ext3_create_journal(struct super_block * sb,
- struct ext3_super_block * es,
+static int ext3_create_journal(struct super_block *sb,
+ struct ext3_super_block *es,
unsigned int journal_inum)
{
journal_t *journal;
int err;
if (sb->s_flags & MS_RDONLY) {
- printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to "
- "create journal.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: readonly filesystem when trying to "
+ "create journal");
return -EROFS;
}
if (!journal)
return -EINVAL;
- printk(KERN_INFO "EXT3-fs: creating new journal on inode %u\n",
+ ext3_msg(sb, KERN_INFO, "creating new journal on inode %u",
journal_inum);
err = journal_create(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error creating journal.\n");
+ ext3_msg(sb, KERN_ERR, "error creating journal");
journal_destroy(journal);
return -EIO;
}
* has recorded an error from a previous lifetime, move that error to the
* main filesystem now.
*/
-static void ext3_clear_journal_err(struct super_block * sb,
- struct ext3_super_block * es)
+static void ext3_clear_journal_err(struct super_block *sb,
+ struct ext3_super_block *es)
{
journal_t *journal;
int j_errno;
__le32 ret;
if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
~EXT3_FEATURE_RO_COMPAT_SUPP))) {
- printk(KERN_WARNING "EXT3-fs: %s: couldn't "
- "remount RDWR because of unsupported "
- "optional features (%x).\n",
- sb->s_id, le32_to_cpu(ret));
+ ext3_msg(sb, KERN_WARNING,
+ "warning: couldn't remount RDWR "
+ "because of unsupported optional "
+ "features (%x)", le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
* require a full umount/remount for now.
*/
if (es->s_last_orphan) {
- printk(KERN_WARNING "EXT3-fs: %s: couldn't "
+ ext3_msg(sb, KERN_WARNING, "warning: couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
- "umount/remount instead.\n",
- sb->s_id);
+ "umount/remount instead.");
err = -EINVAL;
goto restore_opts;
}
if (EXT3_SB(sb)->s_qf_names[type]) {
/* Quotafile not of fs root? */
if (path.dentry->d_parent != sb->s_root)
- printk(KERN_WARNING
- "EXT3-fs: Quota file not on filesystem root. "
- "Journaled quota will not work.\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: Quota file not on filesystem root. "
+ "Journaled quota will not work.");
}
/*
handle_t *handle = journal_current_handle();
if (!handle) {
- printk(KERN_WARNING "EXT3-fs: Quota write (off=%Lu, len=%Lu)"
- " cancelled because transaction is not started.\n",
+ ext3_msg(sb, KERN_WARNING,
+ "warning: quota write (off=%llu, len=%llu)"
+ " cancelled because transaction is not started.",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff