libata: implement dump_id force param

Add dump_id libata.force parameter.  If specified, libata dumps full
IDENTIFY data during device configuration.  This is to aid debugging.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Larry Baker <baker@usgs.gov>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b56ea86..a5c0550 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1252,6 +1252,8 @@ and is between 256 and 4096 characters. It is defined in the file
                        * nohrst, nosrst, norst: suppress hard, soft
                           and both resets.
 
                        * nohrst, nosrst, norst: suppress hard, soft
                           and both resets.
 

+                       * dump_id: dump IDENTIFY data.
+

                        If there are multiple matching configurations changing
                        the same attribute, the last one is used.
 
                        If there are multiple matching configurations changing
                        the same attribute, the last one is used.
 

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8959f42..06b7e49 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2126,6 +2126,14 @@ retry:
                goto err_out;
        }
 
                goto err_out;
        }
 

+       if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
+               ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
+                              "class=%d may_fallback=%d tried_spinup=%d\n",
+                              class, may_fallback, tried_spinup);
+               print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+                              16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
+       }
+

        /* Falling back doesn't make sense if ID data was read
         * successfully at least once.
         */
        /* Falling back doesn't make sense if ID data was read
         * successfully at least once.
         */


@@ -6377,6 +6385,7 @@ static int __init ata_parse_force_one(char **cur,
                { "3.0Gbps",    .spd_limit      = 2 },
                { "noncq",      .horkage_on     = ATA_HORKAGE_NONCQ },
                { "ncq",        .horkage_off    = ATA_HORKAGE_NONCQ },
                { "3.0Gbps",    .spd_limit      = 2 },
                { "noncq",      .horkage_on     = ATA_HORKAGE_NONCQ },
                { "ncq",        .horkage_off    = ATA_HORKAGE_NONCQ },

+               { "dump_id",    .horkage_on     = ATA_HORKAGE_DUMP_ID },

                { "pio0",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 0) },
                { "pio1",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 1) },
                { "pio2",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 2) },
                { "pio0",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 0) },
                { "pio1",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 1) },
                { "pio2",       .xfer_mask      = 1 << (ATA_SHIFT_PIO + 2) },

diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4c5eca4..3bad270 100644 (file)
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -386,6 +386,7 @@ enum {
        ATA_HORKAGE_1_5_GBPS    = (1 << 13),    /* force 1.5 Gbps */
        ATA_HORKAGE_NOSETXFER   = (1 << 14),    /* skip SETXFER, SATA only */
        ATA_HORKAGE_BROKEN_FPDMA_AA     = (1 << 15),    /* skip AA */
        ATA_HORKAGE_1_5_GBPS    = (1 << 13),    /* force 1.5 Gbps */
        ATA_HORKAGE_NOSETXFER   = (1 << 14),    /* skip SETXFER, SATA only */
        ATA_HORKAGE_BROKEN_FPDMA_AA     = (1 << 15),    /* skip AA */

+       ATA_HORKAGE_DUMP_ID     = (1 << 16),    /* dump IDENTIFY data */

 
         /* DMA mask for user DMA control: User visible values; DO NOT
            renumber */
 
         /* DMA mask for user DMA control: User visible values; DO NOT
            renumber */