drm/radeon/kms: add support for hw i2c on r1xx-r5xx
authorAlex Deucher <alexdeucher@gmail.com>
Wed, 23 Dec 2009 08:23:21 +0000 (03:23 -0500)
committerDave Airlie <airlied@redhat.com>
Mon, 8 Feb 2010 23:31:10 +0000 (09:31 +1000)
wire hw i2c support into radeon i2c algo.

fixes merged:
- handle bus probing correctly
- use meaningful error numbers
- abort if transaction fails
- The line mapping is different depending on the asic.
- protect hw i2c engine with a mutex
- rs300 doesn't have a pin select bit
- r200 has a different pin select setup

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drivers/gpu/drm/radeon/r500_reg.h
drivers/gpu/drm/radeon/radeon.h
drivers/gpu/drm/radeon/radeon_combios.c
drivers/gpu/drm/radeon/radeon_device.c
drivers/gpu/drm/radeon/radeon_i2c.c
drivers/gpu/drm/radeon/radeon_reg.h

index 74ad89b..0cf2ad2 100644 (file)
 #define AVIVO_DVOA_BIT_DEPTH_CONTROL                   0x7988
 
 #define AVIVO_DC_GPIO_HPD_A                 0x7e94
-
-#define AVIVO_GPIO_0                        0x7e30
-#define AVIVO_GPIO_1                        0x7e40
-#define AVIVO_GPIO_2                        0x7e50
-#define AVIVO_GPIO_3                        0x7e60
-
 #define AVIVO_DC_GPIO_HPD_Y                 0x7e9c
 
-#define AVIVO_I2C_STATUS                                       0x7d30
-#      define AVIVO_I2C_STATUS_DONE                            (1 << 0)
-#      define AVIVO_I2C_STATUS_NACK                            (1 << 1)
-#      define AVIVO_I2C_STATUS_HALT                            (1 << 2)
-#      define AVIVO_I2C_STATUS_GO                              (1 << 3)
-#      define AVIVO_I2C_STATUS_MASK                            0x7
-/* If radeon_mm_i2c is to be believed, this is HALT, NACK, and maybe
- * DONE? */
-#      define AVIVO_I2C_STATUS_CMD_RESET                       0x7
-#      define AVIVO_I2C_STATUS_CMD_WAIT                        (1 << 3)
-#define AVIVO_I2C_STOP                                         0x7d34
-#define AVIVO_I2C_START_CNTL                           0x7d38
-#      define AVIVO_I2C_START                                          (1 << 8)
-#      define AVIVO_I2C_CONNECTOR0                                     (0 << 16)
-#      define AVIVO_I2C_CONNECTOR1                                     (1 << 16)
-#define R520_I2C_START (1<<0)
-#define R520_I2C_STOP (1<<1)
-#define R520_I2C_RX (1<<2)
-#define R520_I2C_EN (1<<8)
-#define R520_I2C_DDC1 (0<<16)
-#define R520_I2C_DDC2 (1<<16)
-#define R520_I2C_DDC3 (2<<16)
-#define R520_I2C_DDC_MASK (3<<16)
-#define AVIVO_I2C_CONTROL2                                     0x7d3c
-#      define AVIVO_I2C_7D3C_SIZE_SHIFT                        8
-#      define AVIVO_I2C_7D3C_SIZE_MASK                         (0xf << 8)
-#define AVIVO_I2C_CONTROL3                                             0x7d40
-/* Reading is done 4 bytes at a time: read the bottom 8 bits from
- * 7d44, four times in a row.
- * Writing is a little more complex.  First write DATA with
- * 0xnnnnnnzz, then 0xnnnnnnyy, where nnnnnn is some non-deterministic
- * magic number, zz is, I think, the slave address, and yy is the byte
- * you want to write. */
-#define AVIVO_I2C_DATA                                         0x7d44
-#define R520_I2C_ADDR_COUNT_MASK (0x7)
-#define R520_I2C_DATA_COUNT_SHIFT (8)
-#define R520_I2C_DATA_COUNT_MASK (0xF00)
-#define AVIVO_I2C_CNTL                                         0x7d50
-#      define AVIVO_I2C_EN                                                     (1 << 0)
-#      define AVIVO_I2C_RESET                                          (1 << 8)
+#define AVIVO_DC_I2C_STATUS1                           0x7d30
+#      define AVIVO_DC_I2C_DONE                        (1 << 0)
+#      define AVIVO_DC_I2C_NACK                        (1 << 1)
+#      define AVIVO_DC_I2C_HALT                        (1 << 2)
+#      define AVIVO_DC_I2C_GO                          (1 << 3)
+#define AVIVO_DC_I2C_RESET                             0x7d34
+#      define AVIVO_DC_I2C_SOFT_RESET                  (1 << 0)
+#      define AVIVO_DC_I2C_ABORT                       (1 << 8)
+#define AVIVO_DC_I2C_CONTROL1                          0x7d38
+#      define AVIVO_DC_I2C_START                       (1 << 0)
+#      define AVIVO_DC_I2C_STOP                        (1 << 1)
+#      define AVIVO_DC_I2C_RECEIVE                     (1 << 2)
+#      define AVIVO_DC_I2C_EN                          (1 << 8)
+#      define AVIVO_DC_I2C_PIN_SELECT(x)               ((x) << 16)
+#      define AVIVO_SEL_DDC1                           0
+#      define AVIVO_SEL_DDC2                           1
+#      define AVIVO_SEL_DDC3                           2
+#define AVIVO_DC_I2C_CONTROL2                          0x7d3c
+#      define AVIVO_DC_I2C_ADDR_COUNT(x)               ((x) << 0)
+#      define AVIVO_DC_I2C_DATA_COUNT(x)               ((x) << 8)
+#define AVIVO_DC_I2C_CONTROL3                          0x7d40
+#      define AVIVO_DC_I2C_DATA_DRIVE_EN               (1 << 0)
+#      define AVIVO_DC_I2C_DATA_DRIVE_SEL              (1 << 1)
+#      define AVIVO_DC_I2C_CLK_DRIVE_EN                (1 << 7)
+#      define AVIVO_DC_I2C_RD_INTRA_BYTE_DELAY(x)      ((x) << 8)
+#      define AVIVO_DC_I2C_WR_INTRA_BYTE_DELAY(x)      ((x) << 16)
+#      define AVIVO_DC_I2C_TIME_LIMIT(x)               ((x) << 24)
+#define AVIVO_DC_I2C_DATA                              0x7d44
+#define AVIVO_DC_I2C_INTERRUPT_CONTROL                         0x7d48
+#      define AVIVO_DC_I2C_INTERRUPT_STATUS            (1 << 0)
+#      define AVIVO_DC_I2C_INTERRUPT_AK                (1 << 8)
+#      define AVIVO_DC_I2C_INTERRUPT_ENABLE            (1 << 16)
+#define AVIVO_DC_I2C_ARBITRATION                       0x7d50
+#      define AVIVO_DC_I2C_SW_WANTS_TO_USE_I2C         (1 << 0)
+#      define AVIVO_DC_I2C_SW_CAN_USE_I2C              (1 << 1)
+#      define AVIVO_DC_I2C_SW_DONE_USING_I2C           (1 << 8)
+#      define AVIVO_DC_I2C_HW_NEEDS_I2C                (1 << 9)
+#      define AVIVO_DC_I2C_ABORT_HDCP_I2C              (1 << 16)
+#      define AVIVO_DC_I2C_HW_USING_I2C                (1 << 17)
+
+#define AVIVO_DC_GPIO_DDC1_MASK                        0x7e40
+#define AVIVO_DC_GPIO_DDC1_A                           0x7e44
+#define AVIVO_DC_GPIO_DDC1_EN                          0x7e48
+#define AVIVO_DC_GPIO_DDC1_Y                           0x7e4c
+
+#define AVIVO_DC_GPIO_DDC2_MASK                        0x7e50
+#define AVIVO_DC_GPIO_DDC2_A                           0x7e54
+#define AVIVO_DC_GPIO_DDC2_EN                          0x7e58
+#define AVIVO_DC_GPIO_DDC2_Y                           0x7e5c
+
+#define AVIVO_DC_GPIO_DDC3_MASK                        0x7e60
+#define AVIVO_DC_GPIO_DDC3_A                           0x7e64
+#define AVIVO_DC_GPIO_DDC3_EN                          0x7e68
+#define AVIVO_DC_GPIO_DDC3_Y                           0x7e6c
 
 #define AVIVO_DISP_INTERRUPT_STATUS                             0x7edc
 #       define AVIVO_D1_VBLANK_INTERRUPT                        (1 << 4)
index f57480b..88113f7 100644 (file)
@@ -829,6 +829,7 @@ struct radeon_device {
        struct r600_ih ih; /* r6/700 interrupt ring */
        struct workqueue_struct *wq;
        struct work_struct hotplug_work;
+       struct mutex dc_hw_i2c_mutex; /* display controller hw i2c mutex */
 
        /* audio stuff */
        struct timer_list       audio_timer;
index 318afe8..e208d73 100644 (file)
@@ -486,9 +486,65 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
                i2c.y_data_reg = ddc_line;
        }
 
-       if (rdev->family < CHIP_R200)
-               i2c.hw_capable = false;
-       else {
+       switch (rdev->family) {
+       case CHIP_R100:
+       case CHIP_RV100:
+       case CHIP_RS100:
+       case CHIP_RV200:
+       case CHIP_RS200:
+       case CHIP_RS300:
+               switch (ddc_line) {
+               case RADEON_GPIO_DVI_DDC:
+                       /* in theory this should be hw capable,
+                        * but it doesn't seem to work
+                        */
+                       i2c.hw_capable = false;
+                       break;
+               default:
+                       i2c.hw_capable = false;
+                       break;
+               }
+               break;
+       case CHIP_R200:
+               switch (ddc_line) {
+               case RADEON_GPIO_DVI_DDC:
+               case RADEON_GPIO_MONID:
+                       i2c.hw_capable = true;
+                       break;
+               default:
+                       i2c.hw_capable = false;
+                       break;
+               }
+               break;
+       case CHIP_RV250:
+       case CHIP_RV280:
+               switch (ddc_line) {
+               case RADEON_GPIO_VGA_DDC:
+               case RADEON_GPIO_DVI_DDC:
+               case RADEON_GPIO_CRT2_DDC:
+                       i2c.hw_capable = true;
+                       break;
+               default:
+                       i2c.hw_capable = false;
+                       break;
+               }
+               break;
+       case CHIP_R300:
+       case CHIP_R350:
+               switch (ddc_line) {
+               case RADEON_GPIO_VGA_DDC:
+               case RADEON_GPIO_DVI_DDC:
+                       i2c.hw_capable = true;
+                       break;
+               default:
+                       i2c.hw_capable = false;
+                       break;
+               }
+               break;
+       case CHIP_RV350:
+       case CHIP_RV380:
+       case CHIP_RS400:
+       case CHIP_RS480:
                switch (ddc_line) {
                case RADEON_GPIO_VGA_DDC:
                case RADEON_GPIO_DVI_DDC:
@@ -504,6 +560,10 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
                        i2c.hw_capable = false;
                        break;
                }
+               break;
+       default:
+               i2c.hw_capable = false;
+               break;
        }
        i2c.mm_i2c = false;
        i2c.i2c_id = 0;
@@ -1253,7 +1313,10 @@ bool radeon_legacy_get_ext_tmds_info_from_combios(struct radeon_encoder *encoder
                                tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
                                break;
                        case DDC_LCD: /* MM i2c */
-                               DRM_ERROR("MM i2c requires hw i2c engine\n");
+                               i2c_bus.valid = true;
+                               i2c_bus.hw_capable = true;
+                               i2c_bus.mm_i2c = true;
+                               tmds->i2c_bus = radeon_i2c_create(dev, &i2c_bus, "DVO");
                                break;
                        default:
                                DRM_ERROR("Unsupported gpio %d\n", gpio);
index 768b150..18ac29c 100644 (file)
@@ -638,6 +638,7 @@ int radeon_device_init(struct radeon_device *rdev,
        mutex_init(&rdev->cs_mutex);
        mutex_init(&rdev->ib_pool.mutex);
        mutex_init(&rdev->cp.mutex);
+       mutex_init(&rdev->dc_hw_i2c_mutex);
        if (rdev->family >= CHIP_R600)
                spin_lock_init(&rdev->ih.lock);
        mutex_init(&rdev->gem.mutex);
index 75b090f..b47a561 100644 (file)
@@ -26,6 +26,7 @@
 #include "drmP.h"
 #include "radeon_drm.h"
 #include "radeon.h"
+#include "atom.h"
 
 /**
  * radeon_ddc_probe
@@ -71,13 +72,25 @@ static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
         */
        if (rec->hw_capable) {
                if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) {
-                       if (rec->a_clk_reg == RADEON_GPIO_MONID) {
+                       u32 reg;
+
+                       if (rdev->family >= CHIP_RV350)
+                               reg = RADEON_GPIO_MONID;
+                       else if ((rdev->family == CHIP_R300) ||
+                                (rdev->family == CHIP_R350))
+                               reg = RADEON_GPIO_DVI_DDC;
+                       else
+                               reg = RADEON_GPIO_CRT2_DDC;
+
+                       mutex_lock(&rdev->dc_hw_i2c_mutex);
+                       if (rec->a_clk_reg == reg) {
                                WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
                                                               R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1)));
                        } else {
                                WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST |
                                                               R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3)));
                        }
+                       mutex_unlock(&rdev->dc_hw_i2c_mutex);
                }
        }
 
@@ -168,22 +181,584 @@ static void set_data(void *i2c_priv, int data)
        WREG32(rec->en_data_reg, val);
 }
 
-static int radeon_i2c_xfer(struct i2c_adapter *i2c_adap,
-                          struct i2c_msg *msgs, int num)
+/* hw i2c engine for r1xx-4xx hardware
+ * hw can buffer up to 15 bytes
+ */
+static int r100_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
+                           struct i2c_msg *msgs, int num)
+{
+       struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+       struct radeon_device *rdev = i2c->dev->dev_private;
+       struct radeon_i2c_bus_rec *rec = &i2c->rec;
+       struct i2c_msg *p;
+       int i, j, k, ret = num;
+       /* XXX: use get_engine_clock() to get the current sclk */
+       u32 prescale = (((rdev->clock.default_sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128;
+       u32 i2c_cntl_0, i2c_cntl_1, i2c_data;
+       u32 tmp, reg;
+
+       mutex_lock(&rdev->dc_hw_i2c_mutex);
+
+       reg = ((prescale << RADEON_I2C_PRESCALE_SHIFT) |
+              RADEON_I2C_START |
+              RADEON_I2C_STOP |
+              RADEON_I2C_GO);
+
+       if (rdev->is_atom_bios) {
+               tmp = RREG32(RADEON_BIOS_6_SCRATCH);
+               WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE);
+       }
+
+       if (rec->mm_i2c) {
+               i2c_cntl_0 = RADEON_I2C_CNTL_0;
+               i2c_cntl_1 = RADEON_I2C_CNTL_1;
+               i2c_data = RADEON_I2C_DATA;
+       } else {
+               i2c_cntl_0 = RADEON_DVI_I2C_CNTL_0;
+               i2c_cntl_1 = RADEON_DVI_I2C_CNTL_1;
+               i2c_data = RADEON_DVI_I2C_DATA;
+
+               switch (rdev->family) {
+               case CHIP_R100:
+               case CHIP_RV100:
+               case CHIP_RS100:
+               case CHIP_RV200:
+               case CHIP_RS200:
+               case CHIP_RS300:
+                       switch (rec->mask_clk_reg) {
+                       case RADEON_GPIO_DVI_DDC:
+                               /* no gpio select bit */
+                               break;
+                       default:
+                               DRM_ERROR("gpio not supported with hw i2c\n");
+                               ret = -EINVAL;
+                               goto done;
+                       }
+                       break;
+               case CHIP_R200:
+                       /* only bit 4 on r200 */
+                       switch (rec->mask_clk_reg) {
+                       case RADEON_GPIO_DVI_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
+                               break;
+                       case RADEON_GPIO_MONID:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
+                               break;
+                       default:
+                               DRM_ERROR("gpio not supported with hw i2c\n");
+                               ret = -EINVAL;
+                               goto done;
+                       }
+                       break;
+               case CHIP_RV250:
+               case CHIP_RV280:
+                       /* bits 3 and 4 */
+                       switch (rec->mask_clk_reg) {
+                       case RADEON_GPIO_DVI_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
+                               break;
+                       case RADEON_GPIO_VGA_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2);
+                               break;
+                       case RADEON_GPIO_CRT2_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
+                               break;
+                       default:
+                               DRM_ERROR("gpio not supported with hw i2c\n");
+                               ret = -EINVAL;
+                               goto done;
+                       }
+                       break;
+               case CHIP_R300:
+               case CHIP_R350:
+                       /* only bit 4 on r300/r350 */
+                       switch (rec->mask_clk_reg) {
+                       case RADEON_GPIO_VGA_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
+                               break;
+                       case RADEON_GPIO_DVI_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
+                               break;
+                       default:
+                               DRM_ERROR("gpio not supported with hw i2c\n");
+                               ret = -EINVAL;
+                               goto done;
+                       }
+                       break;
+               case CHIP_RV350:
+               case CHIP_RV380:
+               case CHIP_R420:
+               case CHIP_R423:
+               case CHIP_RV410:
+               case CHIP_RS400:
+               case CHIP_RS480:
+                       /* bits 3 and 4 */
+                       switch (rec->mask_clk_reg) {
+                       case RADEON_GPIO_VGA_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1);
+                               break;
+                       case RADEON_GPIO_DVI_DDC:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2);
+                               break;
+                       case RADEON_GPIO_MONID:
+                               reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3);
+                               break;
+                       default:
+                               DRM_ERROR("gpio not supported with hw i2c\n");
+                               ret = -EINVAL;
+                               goto done;
+                       }
+                       break;
+               default:
+                       DRM_ERROR("unsupported asic\n");
+                       ret = -EINVAL;
+                       goto done;
+                       break;
+               }
+       }
+
+       /* check for bus probe */
+       p = &msgs[0];
+       if ((num == 1) && (p->len == 0)) {
+               WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
+                                   RADEON_I2C_NACK |
+                                   RADEON_I2C_HALT |
+                                   RADEON_I2C_SOFT_RST));
+               WREG32(i2c_data, (p->addr << 1) & 0xff);
+               WREG32(i2c_data, 0);
+               WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
+                                   (1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
+                                   RADEON_I2C_EN |
+                                   (48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
+               WREG32(i2c_cntl_0, reg);
+               for (k = 0; k < 32; k++) {
+                       udelay(10);
+                       tmp = RREG32(i2c_cntl_0);
+                       if (tmp & RADEON_I2C_GO)
+                               continue;
+                       tmp = RREG32(i2c_cntl_0);
+                       if (tmp & RADEON_I2C_DONE)
+                               break;
+                       else {
+                               DRM_DEBUG("i2c write error 0x%08x\n", tmp);
+                               WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
+                               ret = -EIO;
+                               goto done;
+                       }
+               }
+               goto done;
+       }
+
+       for (i = 0; i < num; i++) {
+               p = &msgs[i];
+               for (j = 0; j < p->len; j++) {
+                       if (p->flags & I2C_M_RD) {
+                               WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
+                                                   RADEON_I2C_NACK |
+                                                   RADEON_I2C_HALT |
+                                                   RADEON_I2C_SOFT_RST));
+                               WREG32(i2c_data, ((p->addr << 1) & 0xff) | 0x1);
+                               WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
+                                                   (1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
+                                                   RADEON_I2C_EN |
+                                                   (48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
+                               WREG32(i2c_cntl_0, reg | RADEON_I2C_RECEIVE);
+                               for (k = 0; k < 32; k++) {
+                                       udelay(10);
+                                       tmp = RREG32(i2c_cntl_0);
+                                       if (tmp & RADEON_I2C_GO)
+                                               continue;
+                                       tmp = RREG32(i2c_cntl_0);
+                                       if (tmp & RADEON_I2C_DONE)
+                                               break;
+                                       else {
+                                               DRM_DEBUG("i2c read error 0x%08x\n", tmp);
+                                               WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
+                                               ret = -EIO;
+                                               goto done;
+                                       }
+                               }
+                               p->buf[j] = RREG32(i2c_data) & 0xff;
+                       } else {
+                               WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
+                                                   RADEON_I2C_NACK |
+                                                   RADEON_I2C_HALT |
+                                                   RADEON_I2C_SOFT_RST));
+                               WREG32(i2c_data, (p->addr << 1) & 0xff);
+                               WREG32(i2c_data, p->buf[j]);
+                               WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) |
+                                                   (1 << RADEON_I2C_ADDR_COUNT_SHIFT) |
+                                                   RADEON_I2C_EN |
+                                                   (48 << RADEON_I2C_TIME_LIMIT_SHIFT)));
+                               WREG32(i2c_cntl_0, reg);
+                               for (k = 0; k < 32; k++) {
+                                       udelay(10);
+                                       tmp = RREG32(i2c_cntl_0);
+                                       if (tmp & RADEON_I2C_GO)
+                                               continue;
+                                       tmp = RREG32(i2c_cntl_0);
+                                       if (tmp & RADEON_I2C_DONE)
+                                               break;
+                                       else {
+                                               DRM_DEBUG("i2c write error 0x%08x\n", tmp);
+                                               WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT);
+                                               ret = -EIO;
+                                               goto done;
+                                       }
+                               }
+                       }
+               }
+       }
+
+done:
+       WREG32(i2c_cntl_0, 0);
+       WREG32(i2c_cntl_1, 0);
+       WREG32(i2c_cntl_0, (RADEON_I2C_DONE |
+                           RADEON_I2C_NACK |
+                           RADEON_I2C_HALT |
+                           RADEON_I2C_SOFT_RST));
+
+       if (rdev->is_atom_bios) {
+               tmp = RREG32(RADEON_BIOS_6_SCRATCH);
+               tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE;
+               WREG32(RADEON_BIOS_6_SCRATCH, tmp);
+       }
+
+       mutex_unlock(&rdev->dc_hw_i2c_mutex);
+
+       return ret;
+}
+
+/* hw i2c engine for r5xx hardware
+ * hw can buffer up to 15 bytes
+ */
+static int r500_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
+                           struct i2c_msg *msgs, int num)
+{
+       struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+       struct radeon_device *rdev = i2c->dev->dev_private;
+       struct radeon_i2c_bus_rec *rec = &i2c->rec;
+       struct i2c_msg *p;
+       int i2c_clock = 50;
+       int i, j, remaining, current_count, buffer_offset, ret = num;
+       /* XXX: use get_engine_clock() to get the current sclk */
+       u32 prescale;
+       u32 tmp, reg;
+       u32 saved1, saved2;
+
+       mutex_lock(&rdev->dc_hw_i2c_mutex);
+
+       /* clear gpio mask bits */
+       tmp = RREG32(rec->mask_clk_reg);
+       tmp &= ~rec->mask_clk_mask;
+       WREG32(rec->mask_clk_reg, tmp);
+       tmp = RREG32(rec->mask_clk_reg);
+
+       tmp = RREG32(rec->mask_data_reg);
+       tmp &= ~rec->mask_data_mask;
+       WREG32(rec->mask_data_reg, tmp);
+       tmp = RREG32(rec->mask_data_reg);
+
+       /* clear pin values */
+       tmp = RREG32(rec->a_clk_reg);
+       tmp &= ~rec->a_clk_mask;
+       WREG32(rec->a_clk_reg, tmp);
+       tmp = RREG32(rec->a_clk_reg);
+
+       tmp = RREG32(rec->a_data_reg);
+       tmp &= ~rec->a_data_mask;
+       WREG32(rec->a_data_reg, tmp);
+       tmp = RREG32(rec->a_data_reg);
+
+       /* set the pins to input */
+       tmp = RREG32(rec->en_clk_reg);
+       tmp &= ~rec->en_clk_mask;
+       WREG32(rec->en_clk_reg, tmp);
+       tmp = RREG32(rec->en_clk_reg);
+
+       tmp = RREG32(rec->en_data_reg);
+       tmp &= ~rec->en_data_mask;
+       WREG32(rec->en_data_reg, tmp);
+       tmp = RREG32(rec->en_data_reg);
+
+       /* */
+       tmp = RREG32(RADEON_BIOS_6_SCRATCH);
+       WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE);
+       saved1 = RREG32(AVIVO_DC_I2C_CONTROL1);
+       saved2 = RREG32(0x494);
+       WREG32(0x494, saved2 | 0x1);
+
+       WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_WANTS_TO_USE_I2C);
+       for (i = 0; i < 50; i++) {
+               udelay(1);
+               if (RREG32(AVIVO_DC_I2C_ARBITRATION) & AVIVO_DC_I2C_SW_CAN_USE_I2C)
+                       break;
+       }
+       if (i == 50) {
+               DRM_ERROR("failed to get i2c bus\n");
+               ret = -EBUSY;
+               goto done;
+       }
+
+       if (rdev->family == CHIP_R520)
+               prescale = (127 << 8) + ((rdev->clock.default_sclk * 10) / (4 * 127 * i2c_clock));
+       else
+               prescale = (((rdev->clock.default_sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128;
+
+       reg = AVIVO_DC_I2C_START | AVIVO_DC_I2C_STOP | AVIVO_DC_I2C_EN;
+       switch (rec->mask_clk_reg) {
+       case AVIVO_DC_GPIO_DDC1_MASK:
+               reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC1);
+               break;
+       case AVIVO_DC_GPIO_DDC2_MASK:
+               reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC2);
+               break;
+       case AVIVO_DC_GPIO_DDC3_MASK:
+               reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC3);
+               break;
+       default:
+               DRM_ERROR("gpio not supported with hw i2c\n");
+               ret = -EINVAL;
+               goto done;
+       }
+
+       /* check for bus probe */
+       p = &msgs[0];
+       if ((num == 1) && (p->len == 0)) {
+               WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
+                                             AVIVO_DC_I2C_NACK |
+                                             AVIVO_DC_I2C_HALT));
+               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
+               udelay(1);
+               WREG32(AVIVO_DC_I2C_RESET, 0);
+
+               WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff);
+               WREG32(AVIVO_DC_I2C_DATA, 0);
+
+               WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
+               WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
+                                              AVIVO_DC_I2C_DATA_COUNT(1) |
+                                              (prescale << 16)));
+               WREG32(AVIVO_DC_I2C_CONTROL1, reg);
+               WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
+               for (j = 0; j < 200; j++) {
+                       udelay(50);
+                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                       if (tmp & AVIVO_DC_I2C_GO)
+                               continue;
+                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                       if (tmp & AVIVO_DC_I2C_DONE)
+                               break;
+                       else {
+                               DRM_DEBUG("i2c write error 0x%08x\n", tmp);
+                               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
+                               ret = -EIO;
+                               goto done;
+                       }
+               }
+               goto done;
+       }
+
+       for (i = 0; i < num; i++) {
+               p = &msgs[i];
+               remaining = p->len;
+               buffer_offset = 0;
+               if (p->flags & I2C_M_RD) {
+                       while (remaining) {
+                               if (remaining > 15)
+                                       current_count = 15;
+                               else
+                                       current_count = remaining;
+                               WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
+                                                             AVIVO_DC_I2C_NACK |
+                                                             AVIVO_DC_I2C_HALT));
+                               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
+                               udelay(1);
+                               WREG32(AVIVO_DC_I2C_RESET, 0);
+
+                               WREG32(AVIVO_DC_I2C_DATA, ((p->addr << 1) & 0xff) | 0x1);
+                               WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
+                               WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
+                                                              AVIVO_DC_I2C_DATA_COUNT(current_count) |
+                                                              (prescale << 16)));
+                               WREG32(AVIVO_DC_I2C_CONTROL1, reg | AVIVO_DC_I2C_RECEIVE);
+                               WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
+                               for (j = 0; j < 200; j++) {
+                                       udelay(50);
+                                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                                       if (tmp & AVIVO_DC_I2C_GO)
+                                               continue;
+                                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                                       if (tmp & AVIVO_DC_I2C_DONE)
+                                               break;
+                                       else {
+                                               DRM_DEBUG("i2c read error 0x%08x\n", tmp);
+                                               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
+                                               ret = -EIO;
+                                               goto done;
+                                       }
+                               }
+                               for (j = 0; j < current_count; j++)
+                                       p->buf[buffer_offset + j] = RREG32(AVIVO_DC_I2C_DATA) & 0xff;
+                               remaining -= current_count;
+                               buffer_offset += current_count;
+                       }
+               } else {
+                       while (remaining) {
+                               if (remaining > 15)
+                                       current_count = 15;
+                               else
+                                       current_count = remaining;
+                               WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
+                                                             AVIVO_DC_I2C_NACK |
+                                                             AVIVO_DC_I2C_HALT));
+                               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
+                               udelay(1);
+                               WREG32(AVIVO_DC_I2C_RESET, 0);
+
+                               WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff);
+                               for (j = 0; j < current_count; j++)
+                                       WREG32(AVIVO_DC_I2C_DATA, p->buf[buffer_offset + j]);
+
+                               WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48));
+                               WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) |
+                                                              AVIVO_DC_I2C_DATA_COUNT(current_count) |
+                                                              (prescale << 16)));
+                               WREG32(AVIVO_DC_I2C_CONTROL1, reg);
+                               WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO);
+                               for (j = 0; j < 200; j++) {
+                                       udelay(50);
+                                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                                       if (tmp & AVIVO_DC_I2C_GO)
+                                               continue;
+                                       tmp = RREG32(AVIVO_DC_I2C_STATUS1);
+                                       if (tmp & AVIVO_DC_I2C_DONE)
+                                               break;
+                                       else {
+                                               DRM_DEBUG("i2c write error 0x%08x\n", tmp);
+                                               WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT);
+                                               ret = -EIO;
+                                               goto done;
+                                       }
+                               }
+                               remaining -= current_count;
+                               buffer_offset += current_count;
+                       }
+               }
+       }
+
+done:
+       WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE |
+                                     AVIVO_DC_I2C_NACK |
+                                     AVIVO_DC_I2C_HALT));
+       WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET);
+       udelay(1);
+       WREG32(AVIVO_DC_I2C_RESET, 0);
+
+       WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_DONE_USING_I2C);
+       WREG32(AVIVO_DC_I2C_CONTROL1, saved1);
+       WREG32(0x494, saved2);
+       tmp = RREG32(RADEON_BIOS_6_SCRATCH);
+       tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE;
+       WREG32(RADEON_BIOS_6_SCRATCH, tmp);
+
+       mutex_unlock(&rdev->dc_hw_i2c_mutex);
+
+       return ret;
+}
+
+static int radeon_sw_i2c_xfer(struct i2c_adapter *i2c_adap,
+                             struct i2c_msg *msgs, int num)
 {
        struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
        int ret;
 
        radeon_i2c_do_lock(i2c, 1);
-       if (i2c_transfer(&i2c->algo.radeon.bit_adapter, msgs, num) == num)
-               ret = num;
-       else
-               ret = -1;
+       ret = i2c_transfer(&i2c->algo.radeon.bit_adapter, msgs, num);
        radeon_i2c_do_lock(i2c, 0);
 
        return ret;
 }
 
+static int radeon_i2c_xfer(struct i2c_adapter *i2c_adap,
+                          struct i2c_msg *msgs, int num)
+{
+       struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+       struct radeon_device *rdev = i2c->dev->dev_private;
+       struct radeon_i2c_bus_rec *rec = &i2c->rec;
+       int ret;
+
+       switch (rdev->family) {
+       case CHIP_R100:
+       case CHIP_RV100:
+       case CHIP_RS100:
+       case CHIP_RV200:
+       case CHIP_RS200:
+       case CHIP_R200:
+       case CHIP_RV250:
+       case CHIP_RS300:
+       case CHIP_RV280:
+       case CHIP_R300:
+       case CHIP_R350:
+       case CHIP_RV350:
+       case CHIP_RV380:
+       case CHIP_R420:
+       case CHIP_R423:
+       case CHIP_RV410:
+       case CHIP_RS400:
+       case CHIP_RS480:
+               if (rec->hw_capable)
+                       ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
+               else
+                       ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+               break;
+       case CHIP_RS600:
+       case CHIP_RS690:
+       case CHIP_RS740:
+               /* XXX fill in hw i2c implementation */
+               ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+               break;
+       case CHIP_RV515:
+       case CHIP_R520:
+       case CHIP_RV530:
+       case CHIP_RV560:
+       case CHIP_RV570:
+       case CHIP_R580:
+               if (rec->hw_capable) {
+                       if (rec->mm_i2c)
+                               ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
+                       else
+                               ret = r500_hw_i2c_xfer(i2c_adap, msgs, num);
+               } else
+                       ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+               break;
+       case CHIP_R600:
+       case CHIP_RV610:
+       case CHIP_RV630:
+       case CHIP_RV670:
+               /* XXX fill in hw i2c implementation */
+               ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+               break;
+       case CHIP_RV620:
+       case CHIP_RV635:
+       case CHIP_RS780:
+       case CHIP_RS880:
+       case CHIP_RV770:
+       case CHIP_RV730:
+       case CHIP_RV710:
+       case CHIP_RV740:
+               /* XXX fill in hw i2c implementation */
+               ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+               break;
+       default:
+               DRM_ERROR("i2c: unhandled radeon chip\n");
+               ret = -EIO;
+               break;
+       }
+
+       return ret;
+}
+
 static u32 radeon_i2c_func(struct i2c_adapter *adap)
 {
        return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -205,8 +780,6 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
        if (i2c == NULL)
                return NULL;
 
-       i2c->dev = dev;
-       i2c->rec = *rec;
        /* set the internal bit adapter */
        i2c->algo.radeon.bit_adapter.owner = THIS_MODULE;
        i2c_set_adapdata(&i2c->algo.radeon.bit_adapter, i2c);
@@ -223,10 +796,12 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
        i2c->algo.radeon.bit_data.data = i2c;
        ret = i2c_bit_add_bus(&i2c->algo.radeon.bit_adapter);
        if (ret) {
-               DRM_INFO("Failed to register internal bit i2c %s\n", name);
+               DRM_ERROR("Failed to register internal bit i2c %s\n", name);
                goto out_free;
        }
        /* set the radeon i2c adapter */
+       i2c->dev = dev;
+       i2c->rec = *rec;
        i2c->adapter.owner = THIS_MODULE;
        i2c_set_adapdata(&i2c->adapter, i2c);
        sprintf(i2c->adapter.name, "Radeon i2c %s", name);
@@ -234,7 +809,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
        i2c->adapter.algo = &radeon_i2c_algo;
        ret = i2c_add_adapter(&i2c->adapter);
        if (ret) {
-               DRM_INFO("Failed to register i2c %s\n", name);
+               DRM_ERROR("Failed to register i2c %s\n", name);
                goto out_free;
        }
 
index 6d0a009..b4a0667 100644 (file)
 
        /* Multimedia I2C bus */
 #define RADEON_I2C_CNTL_0                  0x0090
-#define RADEON_I2C_DONE                     (1 << 0)
-#define RADEON_I2C_NACK                     (1 << 1)
-#define RADEON_I2C_HALT                     (1 << 2)
-#define RADEON_I2C_SOFT_RST                 (1 << 5)
-#define RADEON_I2C_DRIVE_EN                 (1 << 6)
-#define RADEON_I2C_DRIVE_SEL                (1 << 7)
-#define RADEON_I2C_START                    (1 << 8)
-#define RADEON_I2C_STOP                     (1 << 9)
-#define RADEON_I2C_RECEIVE                  (1 << 10)
-#define RADEON_I2C_ABORT                    (1 << 11)
-#define RADEON_I2C_GO                       (1 << 12)
-#define RADEON_I2C_PRESCALE_SHIFT           16
+#       define RADEON_I2C_DONE              (1 << 0)
+#       define RADEON_I2C_NACK              (1 << 1)
+#       define RADEON_I2C_HALT              (1 << 2)
+#       define RADEON_I2C_SOFT_RST          (1 << 5)
+#       define RADEON_I2C_DRIVE_EN          (1 << 6)
+#       define RADEON_I2C_DRIVE_SEL         (1 << 7)
+#       define RADEON_I2C_START             (1 << 8)
+#       define RADEON_I2C_STOP              (1 << 9)
+#       define RADEON_I2C_RECEIVE           (1 << 10)
+#       define RADEON_I2C_ABORT             (1 << 11)
+#       define RADEON_I2C_GO                (1 << 12)
+#       define RADEON_I2C_PRESCALE_SHIFT    16
 #define RADEON_I2C_CNTL_1                   0x0094
-#define RADEON_I2C_DATA_COUNT_SHIFT         0
-#define RADEON_I2C_ADDR_COUNT_SHIFT         4
-#define RADEON_I2C_INTRA_BYTE_DELAY_SHIFT   8
-#define RADEON_I2C_SEL                      (1 << 16)
-#define RADEON_I2C_EN                       (1 << 17)
-#define RADEON_I2C_TIME_LIMIT_SHIFT         24
+#       define RADEON_I2C_DATA_COUNT_SHIFT  0
+#       define RADEON_I2C_ADDR_COUNT_SHIFT  4
+#       define RADEON_I2C_INTRA_BYTE_DELAY_SHIFT   8
+#       define RADEON_I2C_SEL               (1 << 16)
+#       define RADEON_I2C_EN                (1 << 17)
+#       define RADEON_I2C_TIME_LIMIT_SHIFT  24
 #define RADEON_I2C_DATA                            0x0098
 
 #define RADEON_DVI_I2C_CNTL_0              0x02e0
 #       define R200_DVI_I2C_PIN_SEL(x)      ((x) << 3)
-#       define R200_SEL_DDC1                0 /* 0x60 - VGA_DDC */
-#       define R200_SEL_DDC2                1 /* 0x64 - DVI_DDC */
-#       define R200_SEL_DDC3                2 /* 0x68 - MONID_DDC */
+#       define R200_SEL_DDC1                0 /* depends on asic */
+#       define R200_SEL_DDC2                1 /* depends on asic */
+#       define R200_SEL_DDC3                2 /* depends on asic */
+#      define RADEON_SW_WANTS_TO_USE_DVI_I2C (1 << 13)
+#      define RADEON_SW_CAN_USE_DVI_I2C      (1 << 13)
+#      define RADEON_SW_DONE_USING_DVI_I2C   (1 << 14)
+#      define RADEON_HW_NEEDS_DVI_I2C        (1 << 14)
+#      define RADEON_ABORT_HW_DVI_I2C        (1 << 15)
+#      define RADEON_HW_USING_DVI_I2C        (1 << 15)
 #define RADEON_DVI_I2C_CNTL_1               0x02e4
 #define RADEON_DVI_I2C_DATA                0x02e8