[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue
authorKashyap, Desai <kashyap.desai@lsi.com>
Fri, 29 May 2009 11:17:26 +0000 (16:47 +0530)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Tue, 9 Jun 2009 22:41:36 +0000 (17:41 -0500)
Now Firmware events are handled by firmware event queue.
Previously it was handled in interrupt context/WorkQueue of Linux.
Firmware Event handling is restructured and optimized.

Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/message/fusion/mptbase.c
drivers/message/fusion/mptbase.h
drivers/message/fusion/mptsas.c
drivers/message/fusion/mptsas.h

index ae203ec..d67b263 100644 (file)
@@ -1931,6 +1931,11 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
         */
        mpt_detect_bound_ports(ioc, pdev);
 
+       INIT_LIST_HEAD(&ioc->fw_event_list);
+       spin_lock_init(&ioc->fw_event_lock);
+       snprintf(ioc->fw_event_q_name, 20, "mpt/%d", ioc->id);
+       ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
        if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
            CAN_SLEEP)) != 0){
                printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
@@ -2010,6 +2015,11 @@ mpt_detach(struct pci_dev *pdev)
        cancel_delayed_work(&ioc->fault_reset_work);
        destroy_workqueue(wq);
 
+       spin_lock_irqsave(&ioc->fw_event_lock, flags);
+       wq = ioc->fw_event_q;
+       ioc->fw_event_q = NULL;
+       spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+       destroy_workqueue(wq);
 
        sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
        remove_proc_entry(pname, NULL);
index 24d6012..b6efc64 100644 (file)
@@ -694,9 +694,18 @@ typedef struct _MPT_ADAPTER
        struct net_device       *netdev;
        struct list_head         sas_topology;
        struct mutex             sas_topology_mutex;
+
+       struct workqueue_struct *fw_event_q;
+       struct list_head         fw_event_list;
+       spinlock_t               fw_event_lock;
+       u8                       fw_events_off; /* if '1', then ignore events */
+       char                     fw_event_q_name[20];
+
        struct mutex             sas_discovery_mutex;
        u8                       sas_discovery_runtime;
        u8                       sas_discovery_ignore_events;
+       struct list_head         sas_device_info_list;
+       struct mutex             sas_device_info_mutex;
        u8                       sas_discovery_quiesce_io;
        int                      sas_index; /* index refrencing */
        MPT_MGMT                 sas_mgmt;
index eb6b10e..22a027e 100644 (file)
@@ -95,7 +95,24 @@ static u8    mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna
 static u8      mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
 static u8      mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS;
 
-static void mptsas_hotplug_work(struct work_struct *work);
+static void mptsas_firmware_event_work(struct work_struct *work);
+static void mptsas_send_sas_event(struct fw_event_work *fw_event);
+static void mptsas_send_raid_event(struct fw_event_work *fw_event);
+static void mptsas_send_ir2_event(struct fw_event_work *fw_event);
+static void mptsas_parse_device_info(struct sas_identify *identify,
+               struct mptsas_devinfo *device_info);
+static inline void mptsas_set_rphy(MPT_ADAPTER *ioc,
+               struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy);
+static struct mptsas_phyinfo   *mptsas_find_phyinfo_by_sas_address
+               (MPT_ADAPTER *ioc, u64 sas_address);
+static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc,
+       struct mptsas_devinfo *device_info, u32 form, u32 form_specific);
+static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc,
+       struct mptsas_enclosure *enclosure, u32 form, u32 form_specific);
+static int mptsas_add_end_device(MPT_ADAPTER *ioc,
+       struct mptsas_phyinfo *phy_info);
+static void mptsas_del_end_device(MPT_ADAPTER *ioc,
+       struct mptsas_phyinfo *phy_info);
 
 static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
                                        MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -219,6 +236,100 @@ static void mptsas_print_expander_pg1(MPT_ADAPTER *ioc, SasExpanderPage1_t *pg1)
            le16_to_cpu(pg1->AttachedDevHandle)));
 }
 
+/* inhibit sas firmware event handling */
+static void
+mptsas_fw_event_off(MPT_ADAPTER *ioc)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&ioc->fw_event_lock, flags);
+       ioc->fw_events_off = 1;
+       ioc->sas_discovery_quiesce_io = 0;
+       spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+}
+
+/* enable sas firmware event handling */
+static void
+mptsas_fw_event_on(MPT_ADAPTER *ioc)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&ioc->fw_event_lock, flags);
+       ioc->fw_events_off = 0;
+       spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* queue a sas firmware event */
+static void
+mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    unsigned long delay)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&ioc->fw_event_lock, flags);
+       list_add_tail(&fw_event->list, &ioc->fw_event_list);
+       INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
+       devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
+           ioc->name, __func__, fw_event));
+       queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+           delay);
+       spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* free memory assoicated to a sas firmware event */
+static void
+mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&ioc->fw_event_lock, flags);
+       devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
+           ioc->name, __func__, fw_event));
+       list_del(&fw_event->list);
+       kfree(fw_event);
+       spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* walk the firmware event queue, and either stop or wait for
+ * outstanding events to complete */
+static void
+mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
+{
+       struct fw_event_work *fw_event, *next;
+       struct mptsas_target_reset_event *target_reset_list, *n;
+       u8      flush_q;
+       MPT_SCSI_HOST   *hd = shost_priv(ioc->sh);
+
+       /* flush the target_reset_list */
+       if (!list_empty(&hd->target_reset_list)) {
+               list_for_each_entry_safe(target_reset_list, n,
+                   &hd->target_reset_list, list) {
+                       dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+                           "%s: removing target reset for id=%d\n",
+                           ioc->name, __func__,
+                          target_reset_list->sas_event_data.TargetID));
+                       list_del(&target_reset_list->list);
+                       kfree(target_reset_list);
+               }
+       }
+
+       if (list_empty(&ioc->fw_event_list) ||
+            !ioc->fw_event_q || in_interrupt())
+               return;
+
+       flush_q = 0;
+       list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+               if (cancel_delayed_work(&fw_event->work))
+                       mptsas_free_fw_event(ioc, fw_event);
+               else
+                       flush_q = 1;
+       }
+       if (flush_q)
+               flush_workqueue(ioc->fw_event_q);
+}
+
+
 static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
 {
        struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
@@ -309,6 +420,7 @@ mptsas_port_delete(MPT_ADAPTER *ioc, struct mptsas_portinfo_details * port_detai
                if(phy_info->port_details != port_details)
                        continue;
                memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+               mptsas_set_rphy(ioc, phy_info, NULL);
                phy_info->port_details = NULL;
        }
        kfree(port_details);
@@ -380,6 +492,157 @@ starget)
                phy_info->port_details->starget = starget;
 }
 
+/**
+ *     mptsas_add_device_component -
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *     @channel: fw mapped id's
+ *     @id:
+ *     @sas_address:
+ *     @device_info:
+ *
+ **/
+static void
+mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id,
+       u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id)
+{
+       struct mptsas_device_info       *sas_info, *next;
+       struct scsi_device      *sdev;
+       struct scsi_target      *starget;
+       struct sas_rphy *rphy;
+
+       /*
+        * Delete all matching devices out of the list
+        */
+       mutex_lock(&ioc->sas_device_info_mutex);
+       list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+           list) {
+               if ((sas_info->sas_address == sas_address ||
+                       (sas_info->fw.channel == channel &&
+                       sas_info->fw.id == id))) {
+                       list_del(&sas_info->list);
+                       kfree(sas_info);
+               }
+       }
+
+       sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+       if (!sas_info)
+               goto out;
+
+       /*
+        * Set Firmware mapping
+        */
+       sas_info->fw.id = id;
+       sas_info->fw.channel = channel;
+
+       sas_info->sas_address = sas_address;
+       sas_info->device_info = device_info;
+       sas_info->slot = slot;
+       sas_info->enclosure_logical_id = enclosure_logical_id;
+       INIT_LIST_HEAD(&sas_info->list);
+       list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+
+       /*
+        * Set OS mapping
+        */
+       shost_for_each_device(sdev, ioc->sh) {
+               starget = scsi_target(sdev);
+               rphy = dev_to_rphy(starget->dev.parent);
+               if (rphy->identify.sas_address == sas_address) {
+                       sas_info->os.id = starget->id;
+                       sas_info->os.channel = starget->channel;
+               }
+       }
+
+ out:
+       mutex_unlock(&ioc->sas_device_info_mutex);
+       return;
+}
+
+/**
+ *     mptsas_add_device_component_by_fw -
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *     @channel:  fw mapped id's
+ *     @id:
+ *
+ **/
+static void
+mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+       struct mptsas_devinfo sas_device;
+       struct mptsas_enclosure enclosure_info;
+       int rc;
+
+       rc = mptsas_sas_device_pg0(ioc, &sas_device,
+           (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+            MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+           (channel << 8) + id);
+       if (rc)
+               return;
+
+       memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+       mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+           (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+            MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+            sas_device.handle_enclosure);
+
+       mptsas_add_device_component(ioc, sas_device.channel,
+           sas_device.id, sas_device.sas_address, sas_device.device_info,
+           sas_device.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *     mptsas_add_device_component_starget -
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *     @starget:
+ *
+ **/
+static void
+mptsas_add_device_component_starget(MPT_ADAPTER *ioc,
+       struct scsi_target *starget)
+{
+       VirtTarget      *vtarget;
+       struct sas_rphy *rphy;
+       struct mptsas_phyinfo   *phy_info = NULL;
+       struct mptsas_enclosure enclosure_info;
+
+       rphy = dev_to_rphy(starget->dev.parent);
+       vtarget = starget->hostdata;
+       phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+                       rphy->identify.sas_address);
+       if (!phy_info)
+               return;
+
+       memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+       mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+               (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+               MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+               phy_info->attached.handle_enclosure);
+
+       mptsas_add_device_component(ioc, phy_info->attached.channel,
+               phy_info->attached.id, phy_info->attached.sas_address,
+               phy_info->attached.device_info,
+               phy_info->attached.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ *     mptsas_del_device_components - Cleaning the list
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_del_device_components(MPT_ADAPTER *ioc)
+{
+       struct mptsas_device_info       *sas_info, *next;
+
+       mutex_lock(&ioc->sas_device_info_mutex);
+       list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+               list) {
+               list_del(&sas_info->list);
+               kfree(sas_info);
+       }
+       mutex_unlock(&ioc->sas_device_info_mutex);
+}
+
 
 /*
  * mptsas_setup_wide_ports
@@ -535,6 +798,29 @@ mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id)
        return vtarget;
 }
 
+static void
+mptsas_queue_device_delete(MPT_ADAPTER *ioc,
+       MpiEventDataSasDeviceStatusChange_t *sas_event_data)
+{
+       struct fw_event_work *fw_event;
+       int sz;
+
+       sz = offsetof(struct fw_event_work, event_data) +
+           sizeof(MpiEventDataSasDeviceStatusChange_t);
+       fw_event = kzalloc(sz, GFP_ATOMIC);
+       if (!fw_event) {
+               printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+                   ioc->name, __func__, __LINE__);
+               return;
+       }
+       memcpy(fw_event->event_data, sas_event_data,
+           sizeof(MpiEventDataSasDeviceStatusChange_t));
+       fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE;
+       fw_event->ioc = ioc;
+       mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+
 /**
  * mptsas_target_reset
  *
@@ -654,10 +940,8 @@ mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 {
        MPT_SCSI_HOST   *hd = shost_priv(ioc->sh);
         struct list_head *head = &hd->target_reset_list;
-       struct mptsas_hotplug_event *ev;
        EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
        u8              id, channel;
-       __le64          sas_address;
        struct mptsas_target_reset_event        *target_reset_list;
        SCSITaskMgmtReply_t *pScsiTmReply;
 
@@ -729,41 +1013,9 @@ mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
         * enable work queue to remove device from upper layers
         */
        list_del(&target_reset_list->list);
-
-       ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-       if (!ev) {
-               dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
-                   ioc->name,__func__, __LINE__));
-               goto out_fail;
-       }
-
-       dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
-               ioc->name, mf));
-
-       INIT_WORK(&ev->work, mptsas_hotplug_work);
-       ev->ioc = ioc;
-       ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-       ev->parent_handle =
-           le16_to_cpu(sas_event_data->ParentDevHandle);
-       ev->channel = channel;
-       ev->id =id;
-       ev->phy_id = sas_event_data->PhyNum;
-       memcpy(&sas_address, &sas_event_data->SASAddress,
-           sizeof(__le64));
-       ev->sas_address = le64_to_cpu(sas_address);
-       ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-       dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-          "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n",
-          ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id));
-
-       ev->event_type = MPTSAS_DEL_DEVICE;
-       schedule_work(&ev->work);
-       kfree(target_reset_list);
-
- out_fail:
-
-       mpt_clear_taskmgmt_in_progress_flag(ioc);
-       return 0;
+       if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
+               mptsas_queue_device_delete(ioc,
+                       &target_reset_list->sas_event_data);
 
 
        /*
@@ -798,37 +1050,58 @@ static int
 mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
        MPT_SCSI_HOST   *hd;
-       struct mptsas_target_reset_event *target_reset_list, *n;
        int rc;
 
        rc = mptscsih_ioc_reset(ioc, reset_phase);
+       if ((ioc->bus_type != SAS) || (!rc))
+               return rc;
 
-       if (ioc->bus_type != SAS)
-               goto out;
-
-       if (reset_phase != MPT_IOC_POST_RESET)
-               goto out;
-
-       if (!ioc->sh || !ioc->sh->hostdata)
-               goto out;
        hd = shost_priv(ioc->sh);
        if (!hd->ioc)
                goto out;
 
-       if (list_empty(&hd->target_reset_list))
-               goto out;
-
-       /* flush the target_reset_list */
-       list_for_each_entry_safe(target_reset_list, n,
-           &hd->target_reset_list, list) {
-               list_del(&target_reset_list->list);
-               kfree(target_reset_list);
+       switch (reset_phase) {
+       case MPT_IOC_SETUP_RESET:
+               dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+                   "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+               mptsas_fw_event_off(ioc);
+               break;
+       case MPT_IOC_PRE_RESET:
+               dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+                   "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+               break;
+       case MPT_IOC_POST_RESET:
+               dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+                   "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+               if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+                       ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+                       complete(&ioc->sas_mgmt.done);
+               }
+               mptsas_cleanup_fw_event_q(ioc);
+               mptsas_fw_event_on(ioc);
+               break;
+       default:
+               break;
        }
 
  out:
        return rc;
 }
 
+
+/**
+ * enum device_state -
+ * @DEVICE_RETRY: need to retry the TUR
+ * @DEVICE_ERROR: TUR return error, don't add device
+ * @DEVICE_READY: device can be added
+ *
+ */
+enum device_state{
+       DEVICE_RETRY,
+       DEVICE_ERROR,
+       DEVICE_READY,
+};
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
                u32 form, u32 form_specific)
@@ -894,15 +1167,268 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
        return error;
 }
 
+/**
+ *     mptsas_add_end_device - report a new end device to sas transport layer
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *     @phy_info: decribes attached device
+ *
+ *     return (0) success (1) failure
+ *
+ **/
+static int
+mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+       struct sas_rphy *rphy;
+       struct sas_port *port;
+       struct sas_identify identify;
+       char *ds = NULL;
+       u8 fw_id;
+
+       if (!phy_info) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: exit at line=%d\n", ioc->name,
+                        __func__, __LINE__));
+               return 1;
+       }
+
+       fw_id = phy_info->attached.id;
+
+       if (mptsas_get_rphy(phy_info)) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return 2;
+       }
+
+       port = mptsas_get_port(phy_info);
+       if (!port) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return 3;
+       }
+
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_SSP_TARGET)
+               ds = "ssp";
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_STP_TARGET)
+               ds = "stp";
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+               ds = "sata";
+
+       printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
+           " phy %d, sas_addr 0x%llx\n", ioc->name, ds,
+           phy_info->attached.channel, phy_info->attached.id,
+           phy_info->attached.phy_id, (unsigned long long)
+           phy_info->attached.sas_address);
+
+       mptsas_parse_device_info(&identify, &phy_info->attached);
+       rphy = sas_end_device_alloc(port);
+       if (!rphy) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return 5; /* non-fatal: an rphy can be added later */
+       }
+
+       rphy->identify = identify;
+       if (sas_rphy_add(rphy)) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               sas_rphy_free(rphy);
+               return 6;
+       }
+       mptsas_set_rphy(ioc, phy_info, rphy);
+       return 0;
+}
+
+/**
+ *     mptsas_del_end_device - report a deleted end device to sas transport
+ *     layer
+ *     @ioc: Pointer to MPT_ADAPTER structure
+ *     @phy_info: decribes attached device
+ *
+ **/
+static void
+mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+       struct sas_rphy *rphy;
+       struct sas_port *port;
+       struct mptsas_portinfo *port_info;
+       struct mptsas_phyinfo *phy_info_parent;
+       int i;
+       char *ds = NULL;
+       u8 fw_id;
+       u64 sas_address;
+
+       if (!phy_info)
+               return;
+
+       fw_id = phy_info->attached.id;
+       sas_address = phy_info->attached.sas_address;
+
+       if (!phy_info->port_details) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return;
+       }
+       rphy = mptsas_get_rphy(phy_info);
+       if (!rphy) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return;
+       }
+
+       if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR
+               || phy_info->attached.device_info
+                       & MPI_SAS_DEVICE_INFO_SMP_INITIATOR
+               || phy_info->attached.device_info
+                       & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+               ds = "initiator";
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_SSP_TARGET)
+               ds = "ssp";
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_STP_TARGET)
+               ds = "stp";
+       if (phy_info->attached.device_info &
+           MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+               ds = "sata";
+
+       dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT
+           "removing %s device: fw_channel %d, fw_id %d, phy %d,"
+           "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel,
+           phy_info->attached.id, phy_info->attached.phy_id,
+           (unsigned long long) sas_address);
+
+       port = mptsas_get_port(phy_info);
+       if (!port) {
+               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, fw_id, __LINE__));
+               return;
+       }
+       port_info = phy_info->portinfo;
+       phy_info_parent = port_info->phy_info;
+       for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) {
+               if (!phy_info_parent->phy)
+                       continue;
+               if (phy_info_parent->attached.sas_address !=
+                   sas_address)
+                       continue;
+               dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev,
+                   MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n",
+                   ioc->name, phy_info_parent->phy_id,
+                   phy_info_parent->phy);
+               sas_port_delete_phy(port, phy_info_parent->phy);
+       }
+
+       dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
+           "delete port %d, sas_addr (0x%llx)\n", ioc->name,
+            port->port_identifier, (unsigned long long)sas_address);
+       sas_port_delete(port);
+       mptsas_set_port(ioc, phy_info, NULL);
+       mptsas_port_delete(ioc, phy_info->port_details);
+}
+
+struct mptsas_phyinfo *
+mptsas_refreshing_device_handles(MPT_ADAPTER *ioc,
+       struct mptsas_devinfo *sas_device)
+{
+       struct mptsas_phyinfo *phy_info;
+       struct mptsas_portinfo *port_info;
+       int i;
+
+       phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+           sas_device->sas_address);
+       if (!phy_info)
+               goto out;
+       port_info = phy_info->portinfo;
+       if (!port_info)
+               goto out;
+       mutex_lock(&ioc->sas_topology_mutex);
+       for (i = 0; i < port_info->num_phys; i++) {
+               if (port_info->phy_info[i].attached.sas_address !=
+                       sas_device->sas_address)
+                       continue;
+               port_info->phy_info[i].attached.channel = sas_device->channel;
+               port_info->phy_info[i].attached.id = sas_device->id;
+               port_info->phy_info[i].attached.sas_address =
+                   sas_device->sas_address;
+               port_info->phy_info[i].attached.handle = sas_device->handle;
+               port_info->phy_info[i].attached.handle_parent =
+                   sas_device->handle_parent;
+               port_info->phy_info[i].attached.handle_enclosure =
+                   sas_device->handle_enclosure;
+       }
+       mutex_unlock(&ioc->sas_topology_mutex);
+ out:
+       return phy_info;
+}
+
+/**
+ * mptsas_firmware_event_work - work thread for processing fw events
+ * @work: work queue payload containing info describing the event
+ * Context: user
+ *
+ */
+static void
+mptsas_firmware_event_work(struct work_struct *work)
+{
+       struct fw_event_work *fw_event =
+               container_of(work, struct fw_event_work, work.work);
+       MPT_ADAPTER *ioc = fw_event->ioc;
+
+
+       /* events handling turned off during host reset */
+       if (ioc->fw_events_off) {
+               mptsas_free_fw_event(ioc, fw_event);
+               return;
+       }
+
+       devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
+           "event = (0x%02x)\n", ioc->name, __func__, fw_event,
+           (fw_event->event & 0xFF)));
+
+       switch (fw_event->event) {
+       case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+               mptsas_send_sas_event(fw_event);
+               break;
+       case MPI_EVENT_INTEGRATED_RAID:
+               mptsas_send_raid_event(fw_event);
+               break;
+       case MPI_EVENT_IR2:
+               mptsas_send_ir2_event(fw_event);
+               break;
+       case MPI_EVENT_PERSISTENT_TABLE_FULL:
+               mptbase_sas_persist_operation(ioc,
+                   MPI_SAS_OP_CLEAR_NOT_PRESENT);
+               mptsas_free_fw_event(ioc, fw_event);
+               break;
+       }
+}
+
+
+
 static int
 mptsas_slave_configure(struct scsi_device *sdev)
 {
+       struct Scsi_Host        *host = sdev->host;
+       MPT_SCSI_HOST   *hd = shost_priv(host);
+       MPT_ADAPTER     *ioc = hd->ioc;
 
        if (sdev->channel == MPTSAS_RAID_CHANNEL)
                goto out;
 
        sas_read_port_mode_page(sdev);
 
+       mptsas_add_device_component_starget(ioc, scsi_target(sdev));
+
  out:
        return mptscsih_slave_configure(sdev);
 }
@@ -984,11 +1510,15 @@ mptsas_target_destroy(struct scsi_target *starget)
        struct sas_rphy         *rphy;
        struct mptsas_portinfo  *p;
        int                      i;
-       MPT_ADAPTER *ioc = hd->ioc;
+       MPT_ADAPTER     *ioc = hd->ioc;
+       VirtTarget      *vtarget;
 
        if (!starget->hostdata)
                return;
 
+       vtarget = starget->hostdata;
+
+
        if (starget->channel == MPTSAS_RAID_CHANNEL)
                goto out;
 
@@ -998,12 +1528,21 @@ mptsas_target_destroy(struct scsi_target *starget)
                        if (p->phy_info[i].attached.sas_address !=
                                        rphy->identify.sas_address)
                                continue;
+
+                       starget_printk(KERN_INFO, starget, MYIOC_s_FMT
+                       "delete device: fw_channel %d, fw_id %d, phy %d, "
+                       "sas_addr 0x%llx\n", ioc->name,
+                       p->phy_info[i].attached.channel,
+                       p->phy_info[i].attached.id,
+                       p->phy_info[i].attached.phy_id, (unsigned long long)
+                       p->phy_info[i].attached.sas_address);
+
                        mptsas_set_starget(&p->phy_info[i], NULL);
-                       goto out;
                }
        }
 
  out:
+       vtarget->starget = NULL;
        kfree(starget->hostdata);
        starget->hostdata = NULL;
 }
@@ -2471,6 +3010,7 @@ mptsas_discovery_work(struct work_struct *work)
        kfree(ev);
 }
 
+
 static struct mptsas_phyinfo *
 mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 {
@@ -2495,30 +3035,6 @@ mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
        return phy_info;
 }
 
-static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
-{
-       struct mptsas_portinfo *port_info;
-       struct mptsas_phyinfo *phy_info = NULL;
-       int i;
-
-       mutex_lock(&ioc->sas_topology_mutex);
-       list_for_each_entry(port_info, &ioc->sas_topology, list) {
-               for (i = 0; i < port_info->num_phys; i++) {
-                       if (!mptsas_is_end_device(
-                               &port_info->phy_info[i].attached))
-                               continue;
-                       if (port_info->phy_info[i].attached.id != id)
-                               continue;
-                       if (port_info->phy_info[i].attached.channel != channel)
-                               continue;
-                       phy_info = &port_info->phy_info[i];
-                       break;
-               }
-       }
-       mutex_unlock(&ioc->sas_topology_mutex);
-       return phy_info;
-}
 
 static struct mptsas_phyinfo *
 mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
@@ -2547,17 +3063,6 @@ mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
        return phy_info;
 }
 
-/*
- * Work queue thread to clear the persitency table
- */
-static void
-mptsas_persist_clear_table(struct work_struct *work)
-{
-       MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
-
-       mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
@@ -2583,7 +3088,8 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
        pRaidVolumePage0_t              buffer = NULL;
        RaidPhysDiskPage0_t             phys_disk;
        int                             i;
-       struct mptsas_hotplug_event     *ev;
+       struct mptsas_phyinfo   *phy_info;
+       struct mptsas_devinfo           sas_device;
 
        memset(&cfg, 0 , sizeof(CONFIGPARMS));
        memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
@@ -2623,20 +3129,16 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
                    buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
                        continue;
 
-               ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-               if (!ev) {
-                       printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
-                       goto out;
-               }
+               if (mptsas_sas_device_pg0(ioc, &sas_device,
+                   (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+                    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+                       (phys_disk.PhysDiskBus << 8) +
+                       phys_disk.PhysDiskID))
+                       continue;
 
-               INIT_WORK(&ev->work, mptsas_hotplug_work);
-               ev->ioc = ioc;
-               ev->id = phys_disk.PhysDiskID;
-               ev->channel = phys_disk.PhysDiskBus;
-               ev->phys_disk_num_valid = 1;
-               ev->phys_disk_num = phys_disk.PhysDiskNum;
-               ev->event_type = MPTSAS_ADD_DEVICE;
-               schedule_work(&ev->work);
+               phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+                   sas_device.sas_address);
+               mptsas_add_end_device(ioc, phy_info);
        }
 
  out:
@@ -2648,417 +3150,385 @@ mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id)
  * Work queue thread to handle SAS hotplug events
  */
 static void
-mptsas_hotplug_work(struct work_struct *work)
+mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+    struct mptsas_hotplug_event *hot_plug_info)
 {
-       struct mptsas_hotplug_event *ev =
-               container_of(work, struct mptsas_hotplug_event, work);
-
-       MPT_ADAPTER *ioc = ev->ioc;
        struct mptsas_phyinfo *phy_info;
-       struct sas_rphy *rphy;
-       struct sas_port *port;
-       struct scsi_device *sdev;
        struct scsi_target * starget;
-       struct sas_identify identify;
-       char *ds = NULL;
        struct mptsas_devinfo sas_device;
        VirtTarget *vtarget;
-       VirtDevice *vdevice;
+       int i;
 
-       mutex_lock(&ioc->sas_discovery_mutex);
-       switch (ev->event_type) {
-       case MPTSAS_DEL_DEVICE:
+       switch (hot_plug_info->event_type) {
 
-               phy_info = NULL;
-               if (ev->phys_disk_num_valid) {
-                       if (ev->hidden_raid_component){
-                               if (mptsas_sas_device_pg0(ioc, &sas_device,
-                                   (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
-                                    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-                                   (ev->channel << 8) + ev->id)) {
-                                       dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                                       "%s: exit at line=%d\n", ioc->name,
-                                               __func__, __LINE__));
-                                       break;
-                               }
-                               phy_info = mptsas_find_phyinfo_by_sas_address(
-                                   ioc, sas_device.sas_address);
-                       }else
-                               phy_info = mptsas_find_phyinfo_by_phys_disk_num(
-                                   ioc, ev->channel, ev->phys_disk_num);
+       case MPTSAS_ADD_PHYSDISK:
+
+               if (!ioc->raid_data.pIocPg2)
+                       break;
+
+               for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+                       if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
+                           hot_plug_info->id) {
+                               printk(MYIOC_s_WARN_FMT "firmware bug: unable "
+                                   "to add hidden disk - target_id matchs "
+                                   "volume_id\n", ioc->name);
+                               mptsas_free_fw_event(ioc, fw_event);
+                               return;
+                       }
                }
+               mpt_findImVolumes(ioc);
 
+       case MPTSAS_ADD_DEVICE:
+               memset(&sas_device, 0, sizeof(struct mptsas_devinfo));
+               mptsas_sas_device_pg0(ioc, &sas_device,
+                   (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+                   MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+                   (hot_plug_info->channel << 8) +
+                   hot_plug_info->id);
+
+               if (!sas_device.handle)
+                       return;
+
+               phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
                if (!phy_info)
-                       phy_info = mptsas_find_phyinfo_by_target(ioc,
-                           ev->channel, ev->id);
+                       break;
 
-               /*
-                * Sanity checks, for non-existing phys and remote rphys.
-                */
-               if (!phy_info){
+               if (mptsas_get_rphy(phy_info))
+                       break;
+
+               mptsas_add_end_device(ioc, phy_info);
+               break;
+
+       case MPTSAS_DEL_DEVICE:
+               phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+                   hot_plug_info->sas_address);
+               mptsas_del_end_device(ioc, phy_info);
+               break;
+
+       case MPTSAS_DEL_PHYSDISK:
+
+               mpt_findImVolumes(ioc);
+
+               phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+                               ioc, hot_plug_info->channel,
+                               hot_plug_info->phys_disk_num);
+               mptsas_del_end_device(ioc, phy_info);
+               break;
+
+       case MPTSAS_ADD_PHYSDISK_REPROBE:
+
+               if (mptsas_sas_device_pg0(ioc, &sas_device,
+                   (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+                    MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+                   (hot_plug_info->channel << 8) + hot_plug_info->id)) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                       "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                                __func__, hot_plug_info->id, __LINE__));
                        break;
                }
-               if (!phy_info->port_details) {
+
+               phy_info = mptsas_find_phyinfo_by_sas_address(
+                   ioc, sas_device.sas_address);
+
+               if (!phy_info) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                               "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                                __func__, hot_plug_info->id, __LINE__));
                        break;
                }
-               rphy = mptsas_get_rphy(phy_info);
-               if (!rphy) {
+
+               starget = mptsas_get_starget(phy_info);
+               if (!starget) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                               "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                                __func__, hot_plug_info->id, __LINE__));
                        break;
                }
 
-               port = mptsas_get_port(phy_info);
-               if (!port) {
+               vtarget = starget->hostdata;
+               if (!vtarget) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                               "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                                __func__, hot_plug_info->id, __LINE__));
                        break;
                }
 
-               starget = mptsas_get_starget(phy_info);
-               if (starget) {
-                       vtarget = starget->hostdata;
-
-                       if (!vtarget) {
-                               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                                       "%s: exit at line=%d\n", ioc->name,
-                                       __func__, __LINE__));
-                               break;
-                       }
+               mpt_findImVolumes(ioc);
 
-                       /*
-                        * Handling  RAID components
-                        */
-                       if (ev->phys_disk_num_valid &&
-                           ev->hidden_raid_component) {
-                               printk(MYIOC_s_INFO_FMT
-                                   "RAID Hidding: channel=%d, id=%d, "
-                                   "physdsk %d \n", ioc->name, ev->channel,
-                                   ev->id, ev->phys_disk_num);
-                               vtarget->id = ev->phys_disk_num;
-                               vtarget->tflags |=
-                                   MPT_TARGET_FLAGS_RAID_COMPONENT;
-                               mptsas_reprobe_target(starget, 1);
-                               phy_info->attached.phys_disk_num =
-                                   ev->phys_disk_num;
-                       break;
-                       }
-               }
+               starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: "
+                   "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+                   ioc->name, hot_plug_info->channel, hot_plug_info->id,
+                   hot_plug_info->phys_disk_num, (unsigned long long)
+                   sas_device.sas_address);
 
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_SSP_TARGET)
-                       ds = "ssp";
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_STP_TARGET)
-                       ds = "stp";
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-                       ds = "sata";
-
-               printk(MYIOC_s_INFO_FMT
-                      "removing %s device, channel %d, id %d, phy %d\n",
-                      ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
-               dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
-                   "delete port (%d)\n", ioc->name, port->port_identifier);
-               sas_port_delete(port);
-               mptsas_port_delete(ioc, phy_info->port_details);
+               vtarget->id = hot_plug_info->phys_disk_num;
+               vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+               phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num;
+               mptsas_reprobe_target(starget, 1);
                break;
-       case MPTSAS_ADD_DEVICE:
 
-               if (ev->phys_disk_num_valid)
-                       mpt_findImVolumes(ioc);
+       case MPTSAS_DEL_PHYSDISK_REPROBE:
 
-               /*
-                * Refresh sas device pg0 data
-                */
                if (mptsas_sas_device_pg0(ioc, &sas_device,
                    (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
                     MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-                       (ev->channel << 8) + ev->id)) {
+                       (hot_plug_info->channel << 8) + hot_plug_info->id)) {
                                dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                                       "%s: exit at line=%d\n", ioc->name,
-                                       __func__, __LINE__));
+                                   "%s: fw_id=%d exit at line=%d\n",
+                                   ioc->name, __func__,
+                                   hot_plug_info->id, __LINE__));
                        break;
                }
 
-               __mptsas_discovery_work(ioc);
-
                phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
                                sas_device.sas_address);
-
-               if (!phy_info || !phy_info->port_details) {
+               if (!phy_info) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                           "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, hot_plug_info->id, __LINE__));
                        break;
                }
 
                starget = mptsas_get_starget(phy_info);
-               if (starget && (!ev->hidden_raid_component)){
-
-                       vtarget = starget->hostdata;
-
-                       if (!vtarget) {
-                               dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                                   "%s: exit at line=%d\n", ioc->name,
-                                   __func__, __LINE__));
-                               break;
-                       }
-                       /*
-                        * Handling  RAID components
-                        */
-                       if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
-                               printk(MYIOC_s_INFO_FMT
-                                   "RAID Exposing: channel=%d, id=%d, "
-                                   "physdsk %d \n", ioc->name, ev->channel,
-                                   ev->id, ev->phys_disk_num);
-                               vtarget->tflags &=
-                                   ~MPT_TARGET_FLAGS_RAID_COMPONENT;
-                               vtarget->id = ev->id;
-                               mptsas_reprobe_target(starget, 0);
-                               phy_info->attached.phys_disk_num = ~0;
-                       }
+               if (!starget) {
+                       dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+                           "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, hot_plug_info->id, __LINE__));
                        break;
                }
 
-               if (mptsas_get_rphy(phy_info)) {
+               vtarget = starget->hostdata;
+               if (!vtarget) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
-                       if (ev->channel) printk("%d\n", __LINE__);
+                           "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, hot_plug_info->id, __LINE__));
                        break;
                }
 
-               port = mptsas_get_port(phy_info);
-               if (!port) {
+               if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) {
                        dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
+                           "%s: fw_id=%d exit at line=%d\n", ioc->name,
+                        __func__, hot_plug_info->id, __LINE__));
                        break;
                }
-               memcpy(&phy_info->attached, &sas_device,
-                   sizeof(struct mptsas_devinfo));
-
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_SSP_TARGET)
-                       ds = "ssp";
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_STP_TARGET)
-                       ds = "stp";
-               if (phy_info->attached.device_info &
-                   MPI_SAS_DEVICE_INFO_SATA_DEVICE)
-                       ds = "sata";
-
-               printk(MYIOC_s_INFO_FMT
-                      "attaching %s device, channel %d, id %d, phy %d\n",
-                      ioc->name, ds, ev->channel, ev->id, ev->phy_id);
 
-               mptsas_parse_device_info(&identify, &phy_info->attached);
-               rphy = sas_end_device_alloc(port);
-               if (!rphy) {
-                       dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
-                       break; /* non-fatal: an rphy can be added later */
-               }
+               mpt_findImVolumes(ioc);
 
-               rphy->identify = identify;
-               if (sas_rphy_add(rphy)) {
-                       dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
-                               "%s: exit at line=%d\n", ioc->name,
-                               __func__, __LINE__));
-                       sas_rphy_free(rphy);
-                       break;
-               }
-               mptsas_set_rphy(ioc, phy_info, rphy);
+               starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:"
+                   " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+                   ioc->name, hot_plug_info->channel, hot_plug_info->id,
+                   hot_plug_info->phys_disk_num, (unsigned long long)
+                   sas_device.sas_address);
+
+               vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+               vtarget->id = hot_plug_info->id;
+               phy_info->attached.phys_disk_num = ~0;
+               mptsas_reprobe_target(starget, 0);
+               mptsas_add_device_component_by_fw(ioc,
+                   hot_plug_info->channel, hot_plug_info->id);
                break;
+
        case MPTSAS_ADD_RAID:
-               sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-                   ev->id, 0);
-               if (sdev) {
-                       scsi_device_put(sdev);
-                       break;
-               }
-               printk(MYIOC_s_INFO_FMT
-                      "attaching raid volume, channel %d, id %d\n",
-                      ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-               scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
+
                mpt_findImVolumes(ioc);
+               printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+                   "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+                   hot_plug_info->id);
+               scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
+                   hot_plug_info->id, 0);
                break;
+
        case MPTSAS_DEL_RAID:
-               sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
-                   ev->id, 0);
-               if (!sdev)
-                       break;
-               printk(MYIOC_s_INFO_FMT
-                      "removing raid volume, channel %d, id %d\n",
-                      ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
-               vdevice = sdev->hostdata;
-               scsi_remove_device(sdev);
-               scsi_device_put(sdev);
+
                mpt_findImVolumes(ioc);
+               printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+                   "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+                   hot_plug_info->id);
+               scsi_remove_device(hot_plug_info->sdev);
+               scsi_device_put(hot_plug_info->sdev);
                break;
+
        case MPTSAS_ADD_INACTIVE_VOLUME:
+
+               mpt_findImVolumes(ioc);
                mptsas_adding_inactive_raid_components(ioc,
-                   ev->channel, ev->id);
+                   hot_plug_info->channel, hot_plug_info->id);
                break;
-       case MPTSAS_IGNORE_EVENT:
+
        default:
                break;
        }
 
-       mutex_unlock(&ioc->sas_discovery_mutex);
-       kfree(ev);
+       mptsas_free_fw_event(ioc, fw_event);
 }
 
 static void
-mptsas_send_sas_event(MPT_ADAPTER *ioc,
-               EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+mptsas_send_sas_event(struct fw_event_work *fw_event)
 {
-       struct mptsas_hotplug_event *ev;
-       u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
-       __le64 sas_address;
+       MPT_ADAPTER *ioc;
+       struct mptsas_hotplug_event hot_plug_info;
+       EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+       u32 device_info;
+       u64 sas_address;
+
+       ioc = fw_event->ioc;
+       sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
+           fw_event->event_data;
+       device_info = le32_to_cpu(sas_event_data->DeviceInfo);
 
        if ((device_info &
-            (MPI_SAS_DEVICE_INFO_SSP_TARGET |
-             MPI_SAS_DEVICE_INFO_STP_TARGET |
-             MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+               (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+               MPI_SAS_DEVICE_INFO_STP_TARGET |
+               MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) {
+               mptsas_free_fw_event(ioc, fw_event);
+               return;
+       }
+
+       if (sas_event_data->ReasonCode ==
+               MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) {
+               mptbase_sas_persist_operation(ioc,
+               MPI_SAS_OP_CLEAR_NOT_PRESENT);
+               mptsas_free_fw_event(ioc, fw_event);
                return;
+       }
 
        switch (sas_event_data->ReasonCode) {
        case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-
-               mptsas_target_reset_queue(ioc, sas_event_data);
-               break;
-
        case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-               ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-               if (!ev) {
-                       printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-                       break;
-               }
-
-               INIT_WORK(&ev->work, mptsas_hotplug_work);
-               ev->ioc = ioc;
-               ev->handle = le16_to_cpu(sas_event_data->DevHandle);
-               ev->parent_handle =
-                   le16_to_cpu(sas_event_data->ParentDevHandle);
-               ev->channel = sas_event_data->Bus;
-               ev->id = sas_event_data->TargetID;
-               ev->phy_id = sas_event_data->PhyNum;
+               memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+               hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle);
+               hot_plug_info.channel = sas_event_data->Bus;
+               hot_plug_info.id = sas_event_data->TargetID;
+               hot_plug_info.phy_id = sas_event_data->PhyNum;
                memcpy(&sas_address, &sas_event_data->SASAddress,
-                   sizeof(__le64));
-               ev->sas_address = le64_to_cpu(sas_address);
-               ev->device_info = device_info;
-
+                   sizeof(u64));
+               hot_plug_info.sas_address = le64_to_cpu(sas_address);
+               hot_plug_info.device_info = device_info;
                if (sas_event_data->ReasonCode &
                    MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
-                       ev->event_type = MPTSAS_ADD_DEVICE;
+                       hot_plug_info.event_type = MPTSAS_ADD_DEVICE;
                else
-                       ev->event_type = MPTSAS_DEL_DEVICE;
-               schedule_work(&ev->work);
+                       hot_plug_info.event_type = MPTSAS_DEL_DEVICE;
+               mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
                break;
+
        case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-       /*
-        * Persistent table is full.
-        */
-               INIT_WORK(&ioc->sas_persist_task,
-                   mptsas_persist_clear_table);
-               schedule_work(&ioc->sas_persist_task);
+               mptbase_sas_persist_operation(ioc,
+                   MPI_SAS_OP_CLEAR_NOT_PRESENT);
+               mptsas_free_fw_event(ioc, fw_event);
                break;
-       /*
-        * TODO, handle other events
-        */
+
        case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-       case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+       /* TODO */
        case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
-       case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
-       case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
-       case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
-       case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+       /* TODO */
        default:
+               mptsas_free_fw_event(ioc, fw_event);
                break;
        }
 }
+
 static void
-mptsas_send_raid_event(MPT_ADAPTER *ioc,
-               EVENT_DATA_RAID *raid_event_data)
+mptsas_send_raid_event(struct fw_event_work *fw_event)
 {
-       struct mptsas_hotplug_event *ev;
-       int status = le32_to_cpu(raid_event_data->SettingsStatus);
-       int state = (status >> 8) & 0xff;
-
-       if (ioc->bus_type != SAS)
-               return;
-
-       ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-       if (!ev) {
-               printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
-               return;
+       MPT_ADAPTER *ioc;
+       EVENT_DATA_RAID *raid_event_data;
+       struct mptsas_hotplug_event hot_plug_info;
+       int status;
+       int state;
+       struct scsi_device *sdev = NULL;
+       VirtDevice *vdevice = NULL;
+       RaidPhysDiskPage0_t phys_disk;
+
+       ioc = fw_event->ioc;
+       raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data;
+       status = le32_to_cpu(raid_event_data->SettingsStatus);
+       state = (status >> 8) & 0xff;
+
+       memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+       hot_plug_info.id = raid_event_data->VolumeID;
+       hot_plug_info.channel = raid_event_data->VolumeBus;
+       hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum;
+
+       if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED ||
+           raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED ||
+           raid_event_data->ReasonCode ==
+           MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) {
+               sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+                   hot_plug_info.id, 0);
+               hot_plug_info.sdev = sdev;
+               if (sdev)
+                       vdevice = sdev->hostdata;
        }
 
-       INIT_WORK(&ev->work, mptsas_hotplug_work);
-       ev->ioc = ioc;
-       ev->id = raid_event_data->VolumeID;
-       ev->channel = raid_event_data->VolumeBus;
-       ev->event_type = MPTSAS_IGNORE_EVENT;
+       devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+           "ReasonCode=%02x\n", ioc->name, __func__,
+           raid_event_data->ReasonCode));
 
        switch (raid_event_data->ReasonCode) {
        case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
-               ev->phys_disk_num_valid = 1;
-               ev->phys_disk_num = raid_event_data->PhysDiskNum;
-               ev->event_type = MPTSAS_ADD_DEVICE;
+               hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE;
                break;
        case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
-               ev->phys_disk_num_valid = 1;
-               ev->phys_disk_num = raid_event_data->PhysDiskNum;
-               ev->hidden_raid_component = 1;
-               ev->event_type = MPTSAS_DEL_DEVICE;
+               hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE;
                break;
        case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
                switch (state) {
                case MPI_PD_STATE_ONLINE:
                case MPI_PD_STATE_NOT_COMPATIBLE:
-                       ev->phys_disk_num_valid = 1;
-                       ev->phys_disk_num = raid_event_data->PhysDiskNum;
-                       ev->hidden_raid_component = 1;
-                       ev->event_type = MPTSAS_ADD_DEVICE;
+                       mpt_raid_phys_disk_pg0(ioc,
+                           raid_event_data->PhysDiskNum, &phys_disk);
+                       hot_plug_info.id = phys_disk.PhysDiskID;
+                       hot_plug_info.channel = phys_disk.PhysDiskBus;
+                       hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
                        break;
+               case MPI_PD_STATE_FAILED:
                case MPI_PD_STATE_MISSING:
                case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
                case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
                case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
-                       ev->phys_disk_num_valid = 1;
-                       ev->phys_disk_num = raid_event_data->PhysDiskNum;
-                       ev->event_type = MPTSAS_DEL_DEVICE;
+                       hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
                        break;
                default:
                        break;
                }
                break;
        case MPI_EVENT_RAID_RC_VOLUME_DELETED:
-               ev->event_type = MPTSAS_DEL_RAID;
+               if (!sdev)
+                       break;
+               vdevice->vtarget->deleted = 1; /* block IO */
+               hot_plug_info.event_type = MPTSAS_DEL_RAID;
                break;
        case MPI_EVENT_RAID_RC_VOLUME_CREATED:
-               ev->event_type = MPTSAS_ADD_RAID;
+               if (sdev) {
+                       scsi_device_put(sdev);
+                       break;
+               }
+               hot_plug_info.event_type = MPTSAS_ADD_RAID;
                break;
        case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+               if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) {
+                       if (!sdev)
+                               break;
+                       vdevice->vtarget->deleted = 1; /* block IO */
+                       hot_plug_info.event_type = MPTSAS_DEL_RAID;
+                       break;
+               }
                switch (state) {
                case MPI_RAIDVOL0_STATUS_STATE_FAILED:
                case MPI_RAIDVOL0_STATUS_STATE_MISSING:
-                       ev->event_type = MPTSAS_DEL_RAID;
+                       if (!sdev)
+                               break;
+                       vdevice->vtarget->deleted = 1; /* block IO */
+                       hot_plug_info.event_type = MPTSAS_DEL_RAID;
                        break;
                case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
                case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
-                       ev->event_type = MPTSAS_ADD_RAID;
+                       if (sdev) {
+                               scsi_device_put(sdev);
+                               break;
+                       }
+                       hot_plug_info.event_type = MPTSAS_ADD_RAID;
                        break;
                default:
                        break;
@@ -3067,7 +3537,11 @@ mptsas_send_raid_event(MPT_ADAPTER *ioc,
        default:
                break;
        }
-       schedule_work(&ev->work);
+
+       if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT)
+               mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+       else
+               mptsas_free_fw_event(ioc, fw_event);
 }
 
 static void
@@ -3106,76 +3580,88 @@ mptsas_send_discovery_event(MPT_ADAPTER *ioc,
  *
  */
 static void
-mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+mptsas_send_ir2_event(struct fw_event_work *fw_event)
 {
-       struct mptsas_hotplug_event *ev;
-
-       if (ir2_data->ReasonCode !=
-           MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
-               return;
-
-       ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
-       if (!ev)
+       MPT_ADAPTER     *ioc;
+       struct mptsas_hotplug_event hot_plug_info;
+       MPI_EVENT_DATA_IR2      *ir2_data;
+       u8 reasonCode;
+
+       ioc = fw_event->ioc;
+       ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data;
+       reasonCode = ir2_data->ReasonCode;
+
+       devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+           "ReasonCode=%02x\n", ioc->name, __func__, reasonCode));
+
+       memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+       hot_plug_info.id = ir2_data->TargetID;
+       hot_plug_info.channel = ir2_data->Bus;
+       switch (reasonCode) {
+       case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+               hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+               break;
+       default:
+               mptsas_free_fw_event(ioc, fw_event);
                return;
-
-       INIT_WORK(&ev->work, mptsas_hotplug_work);
-       ev->ioc = ioc;
-       ev->id = ir2_data->TargetID;
-       ev->channel = ir2_data->Bus;
-       ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
-
-       schedule_work(&ev->work);
-};
+       }
+       mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+}
 
 static int
 mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 {
-       int rc=1;
-       u8 event = le32_to_cpu(reply->Event) & 0xFF;
-
-       if (!ioc->sh)
-               goto out;
+       u32 event = le32_to_cpu(reply->Event);
+       int sz, event_data_sz;
+       struct fw_event_work *fw_event;
+       unsigned long delay;
 
-       /*
-        * sas_discovery_ignore_events
-        *
-        * This flag is to prevent anymore processing of
-        * sas events once mptsas_remove function is called.
-        */
-       if (ioc->sas_discovery_ignore_events) {
-               rc = mptscsih_event_process(ioc, reply);
-               goto out;
-       }
+       /* events turned off due to host reset or driver unloading */
+       if (ioc->fw_events_off)
+               return 0;
 
+       delay = msecs_to_jiffies(1);
        switch (event) {
        case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
-               mptsas_send_sas_event(ioc,
-                       (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
-               break;
-       case MPI_EVENT_INTEGRATED_RAID:
-               mptsas_send_raid_event(ioc,
-                       (EVENT_DATA_RAID *)reply->Data);
-               break;
-       case MPI_EVENT_PERSISTENT_TABLE_FULL:
-               INIT_WORK(&ioc->sas_persist_task,
-                   mptsas_persist_clear_table);
-               schedule_work(&ioc->sas_persist_task);
+       {
+               EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data =
+                   (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data;
+
+               if (sas_event_data->ReasonCode ==
+                   MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) {
+                       mptsas_target_reset_queue(ioc, sas_event_data);
+                       return 0;
+               }
                break;
-        case MPI_EVENT_SAS_DISCOVERY:
+       }
+       case MPI_EVENT_SAS_DISCOVERY:
                mptsas_send_discovery_event(ioc,
                        (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
                break;
+       case MPI_EVENT_INTEGRATED_RAID:
+       case MPI_EVENT_PERSISTENT_TABLE_FULL:
        case MPI_EVENT_IR2:
-               mptsas_send_ir2_event(ioc,
-                   (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+       case MPI_EVENT_SAS_PHY_LINK_STATUS:
+       case MPI_EVENT_QUEUE_FULL:
                break;
        default:
-               rc = mptscsih_event_process(ioc, reply);
-               break;
+               return 0;
        }
- out:
 
-       return rc;
+       event_data_sz = ((reply->MsgLength * 4) -
+           offsetof(EventNotificationReply_t, Data));
+       sz = offsetof(struct fw_event_work, event_data) + event_data_sz;
+       fw_event = kzalloc(sz, GFP_ATOMIC);
+       if (!fw_event) {
+               printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
+                __func__, __LINE__);
+               return 0;
+       }
+       memcpy(fw_event->event_data, reply->Data, event_data_sz);
+       fw_event->event = event;
+       fw_event->ioc = ioc;
+       mptsas_add_fw_event(ioc, fw_event, delay);
+       return 0;
 }
 
 static int
@@ -3197,6 +3683,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
                return r;
 
        ioc = pci_get_drvdata(pdev);
+       mptsas_fw_event_off(ioc);
        ioc->DoneCtx = mptsasDoneCtx;
        ioc->TaskCtx = mptsasTaskCtx;
        ioc->InternalCtx = mptsasInternalCtx;
@@ -3339,6 +3826,9 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
        hd->last_queue_full = 0;
        INIT_LIST_HEAD(&hd->target_reset_list);
+       INIT_LIST_HEAD(&ioc->sas_device_info_list);
+       mutex_init(&ioc->sas_device_info_mutex);
+
        spin_unlock_irqrestore(&ioc->FreeQlock, flags);
 
        if (ioc->sas_data.ptClear==1) {
@@ -3354,7 +3844,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
        }
 
        mptsas_scan_sas_topology(ioc);
-
+       mptsas_fw_event_on(ioc);
        return 0;
 
  out_mptsas_probe:
@@ -3368,7 +3858,8 @@ mptsas_shutdown(struct pci_dev *pdev)
 {
        MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 
-       ioc->sas_discovery_quiesce_io = 0;
+       mptsas_fw_event_off(ioc);
+       mptsas_cleanup_fw_event_q(ioc);
 }
 
 static void __devexit mptsas_remove(struct pci_dev *pdev)
@@ -3379,6 +3870,8 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
 
        mptsas_shutdown(pdev);
 
+       mptsas_del_device_components(ioc);
+
        ioc->sas_discovery_ignore_events = 1;
        sas_remove_host(ioc->sh);
 
@@ -3387,6 +3880,7 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
                list_del(&p->list);
                for (i = 0 ; i < p->num_phys ; i++)
                        mptsas_port_delete(ioc, p->phy_info[i].port_details);
+
                kfree(p->phy_info);
                kfree(p);
        }
index bf528a5..9e0885a 100644 (file)
@@ -61,12 +61,30 @@ enum mptsas_hotplug_action {
        MPTSAS_DEL_DEVICE,
        MPTSAS_ADD_RAID,
        MPTSAS_DEL_RAID,
+       MPTSAS_ADD_PHYSDISK,
+       MPTSAS_ADD_PHYSDISK_REPROBE,
+       MPTSAS_DEL_PHYSDISK,
+       MPTSAS_DEL_PHYSDISK_REPROBE,
        MPTSAS_ADD_INACTIVE_VOLUME,
        MPTSAS_IGNORE_EVENT,
 };
 
+struct mptsas_mapping{
+       u8                      id;
+       u8                      channel;
+};
+
+struct mptsas_device_info {
+       struct list_head        list;
+       struct mptsas_mapping   os;     /* operating system mapping*/
+       struct mptsas_mapping   fw;     /* firmware mapping */
+       u64                     sas_address;
+       u32                     device_info; /* specific bits for devices */
+       u16                     slot;           /* enclosure slot id */
+       u64                     enclosure_logical_id; /*enclosure address */
+};
+
 struct mptsas_hotplug_event {
-       struct work_struct      work;
        MPT_ADAPTER             *ioc;
        enum mptsas_hotplug_action event_type;
        u64                     sas_address;
@@ -74,11 +92,18 @@ struct mptsas_hotplug_event {
        u8                      id;
        u32                     device_info;
        u16                     handle;
-       u16                     parent_handle;
        u8                      phy_id;
-       u8                      phys_disk_num_valid;    /* hrc (hidden raid component) */
        u8                      phys_disk_num;          /* hrc - unique index*/
-       u8                      hidden_raid_component;  /* hrc - don't expose*/
+       struct scsi_device      *sdev;
+};
+
+struct fw_event_work {
+       struct list_head        list;
+       struct delayed_work      work;
+       MPT_ADAPTER     *ioc;
+       u32                     event;
+       u8                      retries;
+       u8                      event_data[1];
 };
 
 struct mptsas_discovery_event {