Fix all device drivers to use the new video_device_node_name function.
This also strips kernel log messages from the "/dev/" prefix, has the device
node location is a userspace policy decision unknown to the kernel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
return err;
}
- if( VFL_TYPE_GRABBER == type ) {
+ if (VFL_TYPE_GRABBER == type)
vv->video_minor = vfd->minor;
- INFO(("%s: registered device video%d [v4l2]\n",
- dev->name, vfd->num));
- } else {
+ else
vv->vbi_minor = vfd->minor;
- INFO(("%s: registered device vbi%d [v4l2]\n",
- dev->name, vfd->num));
- }
+
+ INFO(("%s: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(vfd)));
*vid = vfd;
return 0;
goto out_dev;
}
- printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n",
- ar->vdev->num, M32R_IRQ_INT3, freq);
+ printk("%s: Found M64278 VGA (IRQ %d, Freq %dMHz).\n",
+ video_device_node_name(ar->vdev), M32R_IRQ_INT3, freq);
return 0;
if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER,
video_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device video%d\n",
- btv->c.nr, btv->video_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->video_dev));
if (device_create_file(&btv->video_dev->dev,
&dev_attr_card)<0) {
printk(KERN_ERR "bttv%d: device_create_file 'card' "
if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI,
vbi_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device vbi%d\n",
- btv->c.nr, btv->vbi_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->vbi_dev));
if (!btv->has_radio)
return 0;
if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,
radio_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device radio%d\n",
- btv->c.nr, btv->radio_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->radio_dev));
/* all done */
return 0;
return -ENODEV;
}
- printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
- qcam->vdev.num, qcam->pport->name);
+ printk(KERN_INFO "%s: Colour QuickCam found on %s\n",
+ video_device_node_name(&qcam->vdev), qcam->pport->name);
qcams[num_cams++] = qcam;
static void create_proc_cpia_cam(struct cam_data *cam)
{
- char name[5 + 1 + 10 + 1];
struct proc_dir_entry *ent;
if (!cpia_proc_root || !cam)
return;
- snprintf(name, sizeof(name), "video%d", cam->vdev.num);
-
- ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
+ ent = create_proc_entry(video_device_node_name(&cam->vdev),
+ S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
if (!ent)
return;
static void destroy_proc_cpia_cam(struct cam_data *cam)
{
- char name[5 + 1 + 10 + 1];
-
if (!cam || !cam->proc_entry)
return;
- snprintf(name, sizeof(name), "video%d", cam->vdev.num);
- remove_proc_entry(name, cpia_proc_root);
+ remove_proc_entry(video_device_node_name(&cam->vdev), cpia_proc_root);
cam->proc_entry = NULL;
}
}
#ifdef CONFIG_PROC_FS
- DBG("destroying /proc/cpia/video%d\n", cam->vdev.num);
+ DBG("destroying /proc/cpia/%s\n", video_device_node_name(&cam->vdev));
destroy_proc_cpia_cam(cam);
#endif
if (!cam->open_count) {
if (!cam->open_count) {
video_unregister_device(cam->vdev);
} else {
- LOG("/dev/video%d removed while open, "
- "deferring video_unregister_device\n",
- cam->vdev->num);
+ LOG("%s removed while open, deferring "
+ "video_unregister_device\n",
+ video_device_node_name(cam->vdev));
}
}
{
struct cx18_stream *s = &cx->streams[type];
int vfl_type = cx18_stream_info[type].vfl_type;
+ const char *name;
int num, ret;
/* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something?
s->video_dev = NULL;
return ret;
}
- num = s->video_dev->num;
+
+ name = video_device_node_name(s->video_dev);
switch (vfl_type) {
case VFL_TYPE_GRABBER:
- CX18_INFO("Registered device video%d for %s "
- "(%d x %d.%02d kB)\n",
- num, s->name, cx->stream_buffers[type],
+ CX18_INFO("Registered device %s for %s (%d x %d.%02d kB)\n",
+ name, s->name, cx->stream_buffers[type],
cx->stream_buf_size[type] / 1024,
(cx->stream_buf_size[type] * 100 / 1024) % 100);
break;
case VFL_TYPE_RADIO:
- CX18_INFO("Registered device radio%d for %s\n",
- num, s->name);
+ CX18_INFO("Registered device %s for %s\n", name, s->name);
break;
case VFL_TYPE_VBI:
if (cx->stream_buffers[type])
- CX18_INFO("Registered device vbi%d for %s "
+ CX18_INFO("Registered device %s for %s "
"(%d x %d bytes)\n",
- num, s->name, cx->stream_buffers[type],
+ name, s->name, cx->stream_buffers[type],
cx->stream_buf_size[type]);
else
- CX18_INFO("Registered device vbi%d for %s\n",
- num, s->name);
+ CX18_INFO("Registered device %s for %s\n",
+ name, s->name);
break;
}
if (dev->users) {
cx231xx_warn
- ("device /dev/video%d is open! Deregistration and memory "
- "deallocation are deferred on close.\n", dev->vdev->num);
+ ("device %s is open! Deregistration and memory "
+ "deallocation are deferred on close.\n",
+ video_device_node_name(dev->vdev));
dev->state |= DEV_MISCONFIGURED;
cx231xx_uninit_isoc(dev);
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- cx231xx_info("V4L2 device /dev/vbi%d deregistered\n",
- dev->vbi_dev->num);
+ cx231xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(dev->vbi_dev));
if (-1 != dev->vbi_dev->minor)
video_unregister_device(dev->vbi_dev);
else
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- cx231xx_info("V4L2 device /dev/video%d deregistered\n",
- dev->vdev->num);
+ cx231xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(dev->vdev));
if (-1 != dev->vdev->minor)
video_unregister_device(dev->vdev);
else
return ret;
}
- cx231xx_info("%s/0: registered device video%d [v4l2]\n",
- dev->name, dev->vdev->num);
+ cx231xx_info("%s/0: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(dev->vdev));
/* Initialize VBI template */
memcpy(&cx231xx_vbi_template, &cx231xx_video_template,
return ret;
}
- cx231xx_info("%s/0: registered device vbi%d\n",
- dev->name, dev->vbi_dev->num);
+ cx231xx_info("%s/0: registered device %s\n",
+ dev->name, video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
cx231xx_errdev("can't register radio device\n");
return ret;
}
- cx231xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
+ cx231xx_info("Registered radio device as %s\n",
+ video_device_node_name(dev->radio_dev));
}
- cx231xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
- dev->vdev->num, dev->vbi_dev->num);
+ cx231xx_info("V4L2 device registered as %s and %s\n",
+ video_device_node_name(dev->vdev),
+ video_device_node_name(dev->vbi_dev));
return 0;
}
return err;
}
- printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
- dev->name, dev->v4l_device->num);
+ printk(KERN_INFO "%s: registered device %s [mpeg]\n",
+ dev->name, video_device_node_name(dev->v4l_device));
return 0;
}
dev->name);
goto fail_unreg;
}
- printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
- dev->name, dev->video_dev->num);
+ printk(KERN_INFO "%s/0: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(dev->video_dev));
/* initial device configuration */
mutex_lock(&dev->lock);
cx23885_set_tvnorm(dev, dev->tvnorm);
dev->core->name);
return err;
}
- printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n",
- dev->core->name, dev->mpeg_dev->num);
+ printk(KERN_INFO "%s/2: registered device %s [mpeg]\n",
+ dev->core->name, video_device_node_name(dev->mpeg_dev));
return 0;
}
core->name);
goto fail_unreg;
}
- printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n",
- core->name, dev->video_dev->num);
+ printk(KERN_INFO "%s/0: registered device %s [v4l2]\n",
+ core->name, video_device_node_name(dev->video_dev));
dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi");
err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
core->name);
goto fail_unreg;
}
- printk(KERN_INFO "%s/0: registered device vbi%d\n",
- core->name, dev->vbi_dev->num);
+ printk(KERN_INFO "%s/0: registered device %s\n",
+ core->name, video_device_node_name(dev->vbi_dev));
if (core->board.radio.type == CX88_RADIO) {
dev->radio_dev = cx88_vdev_init(core,dev->pci,
core->name);
goto fail_unreg;
}
- printk(KERN_INFO "%s/0: registered device radio%d\n",
- core->name, dev->radio_dev->num);
+ printk(KERN_INFO "%s/0: registered device %s\n",
+ core->name, video_device_node_name(dev->radio_dev));
}
/* everything worked */
if (dev->users) {
em28xx_warn
- ("device /dev/video%d is open! Deregistration and memory "
+ ("device %s is open! Deregistration and memory "
"deallocation are deferred on close.\n",
- dev->vdev->num);
+ video_device_node_name(dev->vdev));
dev->state |= DEV_MISCONFIGURED;
em28xx_uninit_isoc(dev);
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- em28xx_info("V4L2 device /dev/vbi%d deregistered\n",
- dev->vbi_dev->num);
+ em28xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(dev->vbi_dev));
if (-1 != dev->vbi_dev->minor)
video_unregister_device(dev->vbi_dev);
else
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- em28xx_info("V4L2 device /dev/video%d deregistered\n",
- dev->vdev->num);
+ em28xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(dev->vdev));
if (-1 != dev->vdev->minor)
video_unregister_device(dev->vdev);
else
em28xx_errdev("can't register radio device\n");
return ret;
}
- em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
+ em28xx_info("Registered radio device as %s\n",
+ video_device_node_name(dev->radio_dev));
}
- em28xx_info("V4L2 video device registered as /dev/video%d\n",
- dev->vdev->num);
+ em28xx_info("V4L2 video device registered as %s\n",
+ video_device_node_name(dev->vdev));
if (dev->vbi_dev)
- em28xx_info("V4L2 VBI device registered as /dev/vbi%d\n",
- dev->vbi_dev->num);
+ em28xx_info("V4L2 VBI device registered as %s\n",
+ video_device_node_name(dev->vbi_dev));
return 0;
}
else if (cam->stream != STREAM_OFF) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. To "
- "use it, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use it, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
cam = container_of(kref, struct et61x251_device, kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
+ DBG(2, "V4L2 device %s deregistered",
+ video_device_node_name(cam->v4ldev));
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is already in use",
- cam->v4ldev->num);
+ DBG(2, "Device %s is already in use",
+ video_device_node_name(cam->v4ldev));
DBG(3, "Simultaneous opens are not supported");
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
cam->frame_count = 0;
et61x251_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
+ DBG(3, "Video device %s is open",
+ video_device_node_name(cam->v4ldev));
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
+ DBG(3, "Video device %s closed",
+ video_device_node_name(cam->v4ldev));
kref_put(&cam->kref, et61x251_release_resources);
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
"problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->num);
+ "%s again.", video_device_node_name(cam->v4ldev));
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
+ DBG(2, "V4L2 device registered as %s",
+ video_device_node_name(cam->v4ldev));
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
DBG(2, "Disconnecting %s...", cam->v4ldev->name);
if (cam->users) {
- DBG(2, "Device /dev/video%d is open! Deregistration and "
- "memory deallocation are deferred.",
- cam->v4ldev->num);
+ DBG(2, "Device %s is open! Deregistration and memory "
+ "deallocation are deferred.",
+ video_device_node_name(cam->v4ldev));
cam->state |= DEV_MISCONFIGURED;
et61x251_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
gspca_dev = usb_get_intfdata(intf);
PDEBUG(D_PROBE,
- "Camera is now controlling video device /dev/video%d",
- gspca_dev->vdev.minor);
+ "Camera is now controlling video device %s",
+ video_device_node_name(&gspca_dev->vdev));
}
return ret;
{
struct gspca_dev *gspca_dev = container_of(vfd, struct gspca_dev, vdev);
- PDEBUG(D_PROBE, "/dev/video%d released", gspca_dev->vdev.num);
+ PDEBUG(D_PROBE, "%s released",
+ video_device_node_name(&gspca_dev->vdev));
kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
}
usb_set_intfdata(intf, gspca_dev);
- PDEBUG(D_PROBE, "/dev/video%d created", gspca_dev->vdev.num);
+ PDEBUG(D_PROBE, "%s created", video_device_node_name(&gspca_dev->vdev));
return 0;
out:
kfree(gspca_dev->usb_buf);
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
- PDEBUG(D_PROBE, "/dev/video%d disconnect", gspca_dev->vdev.num);
+ PDEBUG(D_PROBE, "%s disconnect",
+ video_device_node_name(&gspca_dev->vdev));
mutex_lock(&gspca_dev->usb_lock);
gspca_dev->present = 0;
usb_set_intfdata(interface, dev);
/* let the user know what node this device is now attached to */
- v4l2_info(&dev->v4l2_dev, "device now attached to /dev/video%d\n",
- dev->video_dev->minor);
+ v4l2_info(&dev->v4l2_dev, "device now attached to %s\n",
+ video_device_node_name(dev->video_dev));
return 0;
error:
static void hdpvr_disconnect(struct usb_interface *interface)
{
struct hdpvr_device *dev;
- int minor;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
- minor = dev->video_dev->minor;
-
/* prevent more I/O from starting and stop any ongoing */
mutex_lock(&dev->io_mutex);
dev->status = STATUS_DISCONNECTED;
atomic_dec(&dev_nr);
- v4l2_info(&dev->v4l2_dev, "device /dev/video%d disconnected\n", minor);
+ v4l2_info(&dev->v4l2_dev, "device %s disconnected\n",
+ video_device_node_name(dev->video_dev));
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev->usbc_buf);
{
struct ivtv_stream *s = &itv->streams[type];
int vfl_type = ivtv_stream_info[type].vfl_type;
+ const char *name;
int num;
if (s->vdev == NULL)
s->vdev = NULL;
return -ENOMEM;
}
- num = s->vdev->num;
+ name = video_device_node_name(s->vdev);
switch (vfl_type) {
case VFL_TYPE_GRABBER:
- IVTV_INFO("Registered device video%d for %s (%d kB)\n",
- num, s->name, itv->options.kilobytes[type]);
+ IVTV_INFO("Registered device %s for %s (%d kB)\n",
+ name, s->name, itv->options.kilobytes[type]);
break;
case VFL_TYPE_RADIO:
- IVTV_INFO("Registered device radio%d for %s\n",
- num, s->name);
+ IVTV_INFO("Registered device %s for %s\n",
+ name, s->name);
break;
case VFL_TYPE_VBI:
if (itv->options.kilobytes[type])
- IVTV_INFO("Registered device vbi%d for %s (%d kB)\n",
- num, s->name, itv->options.kilobytes[type]);
+ IVTV_INFO("Registered device %s for %s (%d kB)\n",
+ name, s->name, itv->options.kilobytes[type]);
else
- IVTV_INFO("Registered device vbi%d for %s\n",
- num, s->name);
+ IVTV_INFO("Registered device %s for %s\n",
+ name, s->name);
break;
}
return 0;
omap24xxcam_poweron_reset(cam);
- dev_info(cam->dev, "registered device video%d\n", vfd->minor);
+ dev_info(cam->dev, "registered device %s\n",
+ video_device_node_name(vfd));
return 0;
};
-static const char *get_v4l_name(int v4l_type)
-{
- switch (v4l_type) {
- case VFL_TYPE_GRABBER: return "video";
- case VFL_TYPE_RADIO: return "radio";
- case VFL_TYPE_VBI: return "vbi";
- default: return "?";
- }
-}
-
-
/*
* pvr_ioctl()
*
static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip)
{
- int num = dip->devbase.num;
struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw;
enum pvr2_config cfg = dip->config;
- int v4l_type = dip->v4l_type;
pvr2_hdw_v4l_store_minor_number(hdw,dip->minor_type,-1);
are gone. */
video_unregister_device(&dip->devbase);
- printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n",
- get_v4l_name(v4l_type), num,
+ printk(KERN_INFO "pvrusb2: unregistered device %s [%s]\n",
+ video_device_node_name(&dip->devbase),
pvr2_config_get_name(cfg));
}
": Failed to register pvrusb2 v4l device\n");
}
- printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n",
- get_v4l_name(dip->v4l_type), dip->devbase.num,
+ printk(KERN_INFO "pvrusb2: registered device %s [%s]\n",
+ video_device_node_name(&dip->devbase),
pvr2_config_get_name(dip->config));
pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw,
goto err_video_release;
}
- PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num);
+ PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev));
/* occupy slot */
if (hint < MAX_DEV_HINTS)
dev->name);
goto fail4;
}
- printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
- dev->name, dev->video_dev->num);
+ printk(KERN_INFO "%s: registered device %s [v4l2]\n",
+ dev->name, video_device_node_name(dev->video_dev));
dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
vbi_nr[dev->nr]);
if (err < 0)
goto fail4;
- printk(KERN_INFO "%s: registered device vbi%d\n",
- dev->name, dev->vbi_dev->num);
+ printk(KERN_INFO "%s: registered device %s\n",
+ dev->name, video_device_node_name(dev->vbi_dev));
if (card_has_radio(dev)) {
dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
radio_nr[dev->nr]);
if (err < 0)
goto fail4;
- printk(KERN_INFO "%s: registered device radio%d\n",
- dev->name, dev->radio_dev->num);
+ printk(KERN_INFO "%s: registered device %s\n",
+ dev->name, video_device_node_name(dev->radio_dev));
}
/* everything worked */
dev->empress_dev = NULL;
return err;
}
- printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
- dev->name, dev->empress_dev->num);
+ printk(KERN_INFO "%s: registered device %s [mpeg]\n",
+ dev->name, video_device_node_name(dev->empress_dev));
videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops,
&dev->pci->dev, &dev->slock,
err("video_register_device failed");
return -EIO;
}
- dev_info(&intf->dev, "registered new video device: video%d\n",
- se401->vdev.num);
+ dev_info(&intf->dev, "registered new video device: %s\n",
+ video_device_node_name(&se401->vdev));
usb_set_intfdata(intf, se401);
return 0;
else if (cam->stream != STREAM_OFF) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. "
- "To use it, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "To use it, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
cam = container_of(kref, struct sn9c102_device, kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
+ DBG(2, "V4L2 device %s deregistered",
+ video_device_node_name(cam->v4ldev));
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is already in use",
- cam->v4ldev->num);
+ DBG(2, "Device %s is already in use",
+ video_device_node_name(cam->v4ldev));
DBG(3, "Simultaneous opens are not supported");
/*
open() must follow the open flags and should block
cam->frame_count = 0;
sn9c102_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
+ DBG(3, "Video device %s is open", video_device_node_name(cam->v4ldev));
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
+ DBG(3, "Video device %s closed", video_device_node_name(cam->v4ldev));
kref_put(&cam->kref, sn9c102_release_resources);
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
err += sn9c102_set_compression(cam, &jc);
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
- DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->num);
+ DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware problems. "
+ "To use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
+ DBG(2, "V4L2 device registered as %s",
+ video_device_node_name(cam->v4ldev));
video_set_drvdata(cam->v4ldev, cam);
cam->module_param.force_munmap = force_munmap[dev_nr];
DBG(2, "Disconnecting %s...", cam->v4ldev->name);
if (cam->users) {
- DBG(2, "Device /dev/video%d is open! Deregistration and "
- "memory deallocation are deferred.",
- cam->v4ldev->num);
+ DBG(2, "Device %s is open! Deregistration and memory "
+ "deallocation are deferred.",
+ video_device_node_name(cam->v4ldev));
cam->state |= DEV_MISCONFIGURED;
sn9c102_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
if (err)
STK_ERROR("v4l registration failed\n");
else
- STK_INFO("Syntek USB2.0 Camera is now controlling video device"
- " /dev/video%d\n", dev->vdev.num);
+ STK_INFO("Syntek USB2.0 Camera is now controlling device %s\n",
+ video_device_node_name(&dev->vdev));
return err;
}
wake_up_interruptible(&dev->wait_frame);
stk_remove_sysfs_files(&dev->vdev);
- STK_INFO("Syntek USB2.0 Camera release resources "
- "video device /dev/video%d\n", dev->vdev.num);
+ STK_INFO("Syntek USB2.0 Camera release resources device %s\n",
+ video_device_node_name(&dev->vdev));
video_unregister_device(&dev->vdev);
}
retval = -EIO;
goto error_vdev;
}
- PDEBUG(0, "STV(i): registered new video device: video%d",
- stv680->vdev->num);
+ PDEBUG(0, "STV(i): registered new video device: %s",
+ video_device_node_name(stv680->vdev));
usb_set_intfdata (intf, stv680);
retval = stv680_create_sysfs_files(stv680->vdev);
"%s: video_register_device() successful\n", __func__);
}
- dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n",
+ dev_info(&uvd->dev->dev, "%s on %s: canvas=%s videosize=%s\n",
(uvd->handle != NULL) ? uvd->handle->drvName : "???",
- uvd->vdev.num, tmp2, tmp1);
+ video_device_node_name(&uvd->vdev), tmp2, tmp1);
usb_get_dev(uvd->dev);
return 0;
return -EIO;
}
- printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",
- cam->vdev.num);
+ printk(KERN_INFO "ViCam webcam driver now controlling device %s\n",
+ video_device_node_name(&cam->vdev));
usb_set_intfdata (intf, cam);
{
// vbi Device:
if (usbvision->vbi) {
- PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]",
- usbvision->vbi->num);
+ PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
+ video_device_node_name(usbvision->vbi));
if (usbvision->vbi->minor != -1) {
video_unregister_device(usbvision->vbi);
} else {
// Radio Device:
if (usbvision->rdev) {
- PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]",
- usbvision->rdev->num);
+ PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
+ video_device_node_name(usbvision->rdev));
if (usbvision->rdev->minor != -1) {
video_unregister_device(usbvision->rdev);
} else {
// Video Device:
if (usbvision->vdev) {
- PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]",
- usbvision->vdev->num);
+ PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
+ video_device_node_name(usbvision->vdev));
if (usbvision->vdev->minor != -1) {
video_unregister_device(usbvision->vdev);
} else {
video_nr)<0) {
goto err_exit;
}
- printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n",
- usbvision->nr, usbvision->vdev->num);
+ printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
+ usbvision->nr, video_device_node_name(usbvision->vdev));
// Radio Device:
if (usbvision_device_data[usbvision->DevModel].Radio) {
radio_nr)<0) {
goto err_exit;
}
- printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n",
- usbvision->nr, usbvision->rdev->num);
+ printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
+ usbvision->nr, video_device_node_name(usbvision->rdev));
}
// vbi Device:
if (usbvision_device_data[usbvision->DevModel].vbi) {
vbi_nr)<0) {
goto err_exit;
}
- printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n",
- usbvision->nr, usbvision->vbi->num);
+ printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device %s [v4l2] (Not Working Yet!)\n",
+ usbvision->nr, video_device_node_name(usbvision->vbi));
}
// all done
return 0;
return -EBUSY;
}
- dprintk(dev, 1, "open /dev/video%d type=%s users=%d\n", dev->vfd->num,
+ dprintk(dev, 1, "open %s type=%s users=%d\n",
+ video_device_node_name(dev->vfd),
v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users);
/* allocate + initialize per filehandle data */
list_del(list);
dev = list_entry(list, struct vivi_dev, vivi_devlist);
- v4l2_info(&dev->v4l2_dev, "unregistering /dev/video%d\n",
- dev->vfd->num);
+ v4l2_info(&dev->v4l2_dev, "unregistering %s\n",
+ video_device_node_name(dev->vfd));
video_unregister_device(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
video_nr++;
dev->vfd = vfd;
- v4l2_info(&dev->v4l2_dev, "V4L2 device registered as /dev/video%d\n",
- vfd->num);
+ v4l2_info(&dev->v4l2_dev, "V4L2 device registered as %s\n",
+ video_device_node_name(vfd));
return 0;
rel_vdev:
error:
cam->sensor_initialized = 0;
cam->sensor = CC_UNKNOWN;
- DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
+ DBG(1, "Image sensor initialization failed for %s (%s). "
"Try to detach and attach this device again",
- symbolic(camlist, cam->id), cam->v4ldev->num)
+ symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
return err;
}
{
mutex_lock(&w9968cf_devlist_mutex);
- DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num)
+ DBG(2, "V4L device deregistered: %s",
+ video_device_node_name(cam->v4ldev))
video_unregister_device(cam->v4ldev);
list_del(&cam->v4llist);
if (cam->sensor == CC_UNKNOWN) {
DBG(2, "No supported image sensor has been detected by the "
- "'ovcamchip' module for the %s (/dev/video%d). Make "
- "sure it is loaded *before* (re)connecting the camera.",
- symbolic(camlist, cam->id), cam->v4ldev->num)
+ "'ovcamchip' module for the %s (%s). Make sure "
+ "it is loaded *before* (re)connecting the camera.",
+ symbolic(camlist, cam->id),
+ video_device_node_name(cam->v4ldev))
mutex_unlock(&cam->dev_mutex);
up_read(&w9968cf_disconnect);
return -ENODEV;
}
if (cam->users) {
- DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
- symbolic(camlist, cam->id), cam->v4ldev->num, cam->command)
+ DBG(2, "%s (%s) has been already occupied by '%s'",
+ symbolic(camlist, cam->id),
+ video_device_node_name(cam->v4ldev), cam->command)
if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
mutex_unlock(&cam->dev_mutex);
up_read(&w9968cf_disconnect);
mutex_lock(&cam->dev_mutex);
}
- DBG(5, "Opening '%s', /dev/video%d ...",
- symbolic(camlist, cam->id), cam->v4ldev->num)
+ DBG(5, "Opening '%s', %s ...",
+ symbolic(camlist, cam->id), video_device_node_name(cam->v4ldev))
cam->streaming = 0;
cam->misconfigured = 0;
goto fail;
}
- DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num)
+ DBG(2, "V4L device registered as %s",
+ video_device_node_name(cam->v4ldev))
/* Set some basic constants */
w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
wake_up_interruptible_all(&cam->open);
if (cam->users) {
- DBG(2, "The device is open (/dev/video%d)! "
+ DBG(2, "The device is open (%s)! "
"Process name: %s. Deregistration and memory "
"deallocation are deferred on close.",
- cam->v4ldev->num, cam->command)
+ video_device_node_name(cam->v4ldev), cam->command)
cam->misconfigured = 1;
w9968cf_stop_transfer(cam);
wake_up_interruptible(&cam->wait_queue);
else if (cam->stream != STREAM_OFF) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "URB timeout reached. The camera is misconfigured. To "
- "use it, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use it, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
{
struct zc0301_device *cam = container_of(kref, struct zc0301_device,
kref);
- DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num);
+ DBG(2, "V4L2 device %s deregistered",
+ video_device_node_name(cam->v4ldev));
video_set_drvdata(cam->v4ldev, NULL);
video_unregister_device(cam->v4ldev);
usb_put_dev(cam->usbdev);
}
if (cam->users) {
- DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num);
+ DBG(2, "Device %s is busy...",
+ video_device_node_name(cam->v4ldev));
DBG(3, "Simultaneous opens are not supported");
if ((filp->f_flags & O_NONBLOCK) ||
(filp->f_flags & O_NDELAY)) {
cam->frame_count = 0;
zc0301_empty_framequeues(cam);
- DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num);
+ DBG(3, "Video device %s is open",
+ video_device_node_name(cam->v4ldev));
out:
mutex_unlock(&cam->open_mutex);
cam->users--;
wake_up_interruptible_nr(&cam->wait_open, 1);
- DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num);
+ DBG(3, "Video device %s closed",
+ video_device_node_name(cam->v4ldev));
kref_put(&cam->kref, zc0301_release_resources);
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) {
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
- "use the camera, close and open /dev/video%d again.",
- cam->v4ldev->num);
+ "use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -ENOMEM;
}
if (err) { /* atomic, no rollback in ioctl() */
cam->state |= DEV_MISCONFIGURED;
DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
- "problems. To use the camera, close and open "
- "/dev/video%d again.", cam->v4ldev->num);
+ "problems. To use the camera, close and open %s again.",
+ video_device_node_name(cam->v4ldev));
return -EIO;
}
goto fail;
}
- DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num);
+ DBG(2, "V4L2 device registered as %s",
+ video_device_node_name(cam->v4ldev));
cam->module_param.force_munmap = force_munmap[dev_nr];
cam->module_param.frame_timeout = frame_timeout[dev_nr];
DBG(2, "Disconnecting %s...", cam->v4ldev->name);
if (cam->users) {
- DBG(2, "Device /dev/video%d is open! Deregistration and "
+ DBG(2, "Device %s is open! Deregistration and "
"memory deallocation are deferred.",
- cam->v4ldev->num);
+ video_device_node_name(cam->v4ldev));
cam->state |= DEV_MISCONFIGURED;
zc0301_stop_transfer(cam);
cam->state |= DEV_DISCONNECTED;
spin_lock_init(&cam->slock);
- dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n",
- cam->vdev->num);
+ dev_info(&udev->dev, DRIVER_DESC " controlling device %s\n",
+ video_device_node_name(cam->vdev));
return 0;
}
}
video_set_drvdata(go->video_dev, go);
++go->ref_count;
- printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
- go->video_dev->name, go->video_dev->num);
+ printk(KERN_INFO "%s: registered device %s [v4l2]\n",
+ go->video_dev->name, video_device_node_name(go->video_dev));
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff