--- /dev/null
+/*
+ * arch/arm/mach-footbridge/isa-rtc.c
+ *
+ * Copyright (C) 1998 Russell King.
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * CATS has a real-time clock, though the evaluation board doesn't.
+ *
+ * Changelog:
+ * 21-Mar-1998 RMK Created
+ * 27-Aug-1998 PJB CATS support
+ * 28-Dec-1998 APH Made leds optional
+ * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder
+ * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in
+ */
+
+#define RTC_PORT(x) (0x70+(x))
+#define RTC_ALWAYS_BCD 0
+
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+void __init isa_rtc_init(void)
+{
+ int reg_d, reg_b;
+
+ /*
+ * Probe for the RTC.
+ */
+ reg_d = CMOS_READ(RTC_REG_D);
+
+ /*
+ * make sure the divider is set
+ */
+ CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
+
+ /*
+ * Set control reg B
+ * (24 hour mode, update enabled)
+ */
+ reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
+ reg_b |= 2;
+ CMOS_WRITE(reg_b, RTC_REG_B);
+
+ if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
+ CMOS_READ(RTC_REG_B) == reg_b) {
+ /*
+ * We have a RTC. Check the battery
+ */
+ if ((reg_d & 0x80) == 0)
+ printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
+ }
+}
+++ /dev/null
-/*
- * arch/arm/mach-footbridge/include/mach/time.h
- *
- * Copyright (C) 1998 Russell King.
- * Copyright (C) 1998 Phil Blundell
- *
- * CATS has a real-time clock, though the evaluation board doesn't.
- *
- * Changelog:
- * 21-Mar-1998 RMK Created
- * 27-Aug-1998 PJB CATS support
- * 28-Dec-1998 APH Made leds optional
- * 20-Jan-1999 RMK Started merge of EBSA285, CATS and NetWinder
- * 16-Mar-1999 RMK More support for EBSA285-like machines with RTCs in
- */
-
-#define RTC_PORT(x) (rtc_base+(x))
-#define RTC_ALWAYS_BCD 0
-
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/time.h>
-#include "common.h"
-
-static int rtc_base;
-
-static unsigned long __init get_isa_cmos_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- // check to see if the RTC makes sense.....
- if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
- return mktime(1970, 1, 1, 0, 0, 0);
-
- do {
- sec = CMOS_READ(RTC_SECONDS);
- min = CMOS_READ(RTC_MINUTES);
- hour = CMOS_READ(RTC_HOURS);
- day = CMOS_READ(RTC_DAY_OF_MONTH);
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
- } while (sec != CMOS_READ(RTC_SECONDS));
-
- if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- sec = bcd2bin(sec);
- min = bcd2bin(min);
- hour = bcd2bin(hour);
- day = bcd2bin(day);
- mon = bcd2bin(mon);
- year = bcd2bin(year);
- }
- if ((year += 1900) < 1970)
- year += 100;
- return mktime(year, mon, day, hour, min, sec);
-}
-
-static int set_isa_cmos_time(void)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned char save_control, save_freq_select;
- unsigned long nowtime = xtime.tv_sec;
-
- save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
- CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
- save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
- CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
- cmos_minutes = CMOS_READ(RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- cmos_minutes = bcd2bin(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- real_seconds = bin2bcd(real_seconds);
- real_minutes = bin2bcd(real_minutes);
- }
- CMOS_WRITE(real_seconds,RTC_SECONDS);
- CMOS_WRITE(real_minutes,RTC_MINUTES);
- } else
- retval = -1;
-
- /* The following flags have to be released exactly in this order,
- * otherwise the DS12887 (popular MC146818A clone with integrated
- * battery and quartz) will not reset the oscillator and will not
- * update precisely 500 ms later. You won't find this mentioned in
- * the Dallas Semiconductor data sheets, but who believes data
- * sheets anyway ... -- Markus Kuhn
- */
- CMOS_WRITE(save_control, RTC_CONTROL);
- CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
- return retval;
-}
-
-void __init isa_rtc_init(void)
-{
- if (machine_is_personal_server())
- /*
- * Add-in 21285s shouldn't access the RTC
- */
- rtc_base = 0;
- else
- rtc_base = 0x70;
-
- if (rtc_base) {
- int reg_d, reg_b;
-
- /*
- * Probe for the RTC.
- */
- reg_d = CMOS_READ(RTC_REG_D);
-
- /*
- * make sure the divider is set
- */
- CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
-
- /*
- * Set control reg B
- * (24 hour mode, update enabled)
- */
- reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
- reg_b |= 2;
- CMOS_WRITE(reg_b, RTC_REG_B);
-
- if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
- CMOS_READ(RTC_REG_B) == reg_b) {
- struct timespec tv;
-
- /*
- * We have a RTC. Check the battery
- */
- if ((reg_d & 0x80) == 0)
- printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
-
- tv.tv_nsec = 0;
- tv.tv_sec = get_isa_cmos_time();
- do_settimeofday(&tv);
- set_rtc = set_isa_cmos_time;
- } else
- rtc_base = 0;
- }
-}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff