Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
authorLinus Torvalds <torvalds@linux-foundation.org>
Thu, 8 Oct 2009 19:22:45 +0000 (12:22 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 8 Oct 2009 19:22:45 +0000 (12:22 -0700)
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_atp867x: add Power Management support
  pata_atp867x: PIO support fixes
  pata_atp867x: clarifications in timings calculations and cable detection
  pata_atp867x: fix it to not claim MWDMA support
  libata: fix incorrect link online check during probe
  ahci: filter FPDMA non-zero offset enable for Aspire 3810T
  libata: make gtf_filter per-dev
  libata: implement more acpi filtering options
  libata: cosmetic updates
  ahci: display all AHCI 1.3 HBA capability flags (v2)
  pata_ali: trivial fix of a very frequent spelling mistake
  ahci: disable 64bit DMA by default on SB600s

drivers/ata/ahci.c
drivers/ata/libata-acpi.c
drivers/ata/libata-core.c
drivers/ata/libata-eh.c
drivers/ata/libata.h
drivers/ata/pata_ali.c
drivers/ata/pata_atp867x.c
include/linux/ata.h
include/linux/libata.h

index acd1162..4edca6e 100644 (file)
@@ -122,6 +122,7 @@ enum {
        HOST_VERSION            = 0x10, /* AHCI spec. version compliancy */
        HOST_EM_LOC             = 0x1c, /* Enclosure Management location */
        HOST_EM_CTL             = 0x20, /* Enclosure Management Control */
+       HOST_CAP2               = 0x24, /* host capabilities, extended */
 
        /* HOST_CTL bits */
        HOST_RESET              = (1 << 0),  /* reset controller; self-clear */
@@ -129,16 +130,29 @@ enum {
        HOST_AHCI_EN            = (1 << 31), /* AHCI enabled */
 
        /* HOST_CAP bits */
+       HOST_CAP_SXS            = (1 << 5),  /* Supports External SATA */
        HOST_CAP_EMS            = (1 << 6),  /* Enclosure Management support */
-       HOST_CAP_SSC            = (1 << 14), /* Slumber capable */
+       HOST_CAP_CCC            = (1 << 7),  /* Command Completion Coalescing */
+       HOST_CAP_PART           = (1 << 13), /* Partial state capable */
+       HOST_CAP_SSC            = (1 << 14), /* Slumber state capable */
+       HOST_CAP_PIO_MULTI      = (1 << 15), /* PIO multiple DRQ support */
+       HOST_CAP_FBS            = (1 << 16), /* FIS-based switching support */
        HOST_CAP_PMP            = (1 << 17), /* Port Multiplier support */
+       HOST_CAP_ONLY           = (1 << 18), /* Supports AHCI mode only */
        HOST_CAP_CLO            = (1 << 24), /* Command List Override support */
+       HOST_CAP_LED            = (1 << 25), /* Supports activity LED */
        HOST_CAP_ALPM           = (1 << 26), /* Aggressive Link PM support */
        HOST_CAP_SSS            = (1 << 27), /* Staggered Spin-up */
+       HOST_CAP_MPS            = (1 << 28), /* Mechanical presence switch */
        HOST_CAP_SNTF           = (1 << 29), /* SNotification register */
        HOST_CAP_NCQ            = (1 << 30), /* Native Command Queueing */
        HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
 
+       /* HOST_CAP2 bits */
+       HOST_CAP2_BOH           = (1 << 0),  /* BIOS/OS handoff supported */
+       HOST_CAP2_NVMHCI        = (1 << 1),  /* NVMHCI supported */
+       HOST_CAP2_APST          = (1 << 2),  /* Automatic partial to slumber */
+
        /* registers for each SATA port */
        PORT_LST_ADDR           = 0x00, /* command list DMA addr */
        PORT_LST_ADDR_HI        = 0x04, /* command list DMA addr hi */
@@ -267,8 +281,10 @@ struct ahci_em_priv {
 struct ahci_host_priv {
        unsigned int            flags;          /* AHCI_HFLAG_* */
        u32                     cap;            /* cap to use */
+       u32                     cap2;           /* cap2 to use */
        u32                     port_map;       /* port map to use */
        u32                     saved_cap;      /* saved initial cap */
+       u32                     saved_cap2;     /* saved initial cap2 */
        u32                     saved_port_map; /* saved initial port_map */
        u32                     em_loc; /* enclosure management location */
 };
@@ -331,12 +347,15 @@ static void ahci_init_sw_activity(struct ata_link *link);
 
 static ssize_t ahci_show_host_caps(struct device *dev,
                                   struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+                                  struct device_attribute *attr, char *buf);
 static ssize_t ahci_show_host_version(struct device *dev,
                                      struct device_attribute *attr, char *buf);
 static ssize_t ahci_show_port_cmd(struct device *dev,
                                  struct device_attribute *attr, char *buf);
 
 DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
 DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
 DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
 
@@ -345,6 +364,7 @@ static struct device_attribute *ahci_shost_attrs[] = {
        &dev_attr_em_message_type,
        &dev_attr_em_message,
        &dev_attr_ahci_host_caps,
+       &dev_attr_ahci_host_cap2,
        &dev_attr_ahci_host_version,
        &dev_attr_ahci_port_cmd,
        NULL
@@ -447,7 +467,8 @@ static const struct ata_port_info ahci_port_info[] = {
        [board_ahci_sb600] =
        {
                AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL |
-                                AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
+                                AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+                                AHCI_HFLAG_32BIT_ONLY),
                .flags          = AHCI_FLAG_COMMON,
                .pio_mask       = ATA_PIO4,
                .udma_mask      = ATA_UDMA6,
@@ -732,6 +753,16 @@ static ssize_t ahci_show_host_caps(struct device *dev,
        return sprintf(buf, "%x\n", hpriv->cap);
 }
 
+static ssize_t ahci_show_host_cap2(struct device *dev,
+                                  struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(dev);
+       struct ata_port *ap = ata_shost_to_port(shost);
+       struct ahci_host_priv *hpriv = ap->host->private_data;
+
+       return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
 static ssize_t ahci_show_host_version(struct device *dev,
                                   struct device_attribute *attr, char *buf)
 {
@@ -771,7 +802,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
                                     struct ahci_host_priv *hpriv)
 {
        void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
-       u32 cap, port_map;
+       u32 cap, cap2, vers, port_map;
        int i;
        int mv;
 
@@ -784,6 +815,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
        hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
        hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
 
+       /* CAP2 register is only defined for AHCI 1.2 and later */
+       vers = readl(mmio + HOST_VERSION);
+       if ((vers >> 16) > 1 ||
+          ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+               hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+       else
+               hpriv->saved_cap2 = cap2 = 0;
+
        /* some chips have errata preventing 64bit use */
        if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
                dev_printk(KERN_INFO, &pdev->dev,
@@ -869,6 +908,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 
        /* record values to use during operation */
        hpriv->cap = cap;
+       hpriv->cap2 = cap2;
        hpriv->port_map = port_map;
 }
 
@@ -887,6 +927,8 @@ static void ahci_restore_initial_config(struct ata_host *host)
        void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 
        writel(hpriv->saved_cap, mmio + HOST_CAP);
+       if (hpriv->saved_cap2)
+               writel(hpriv->saved_cap2, mmio + HOST_CAP2);
        writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
        (void) readl(mmio + HOST_PORTS_IMPL);   /* flush */
 }
@@ -2534,13 +2576,14 @@ static void ahci_print_info(struct ata_host *host)
        struct ahci_host_priv *hpriv = host->private_data;
        struct pci_dev *pdev = to_pci_dev(host->dev);
        void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-       u32 vers, cap, impl, speed;
+       u32 vers, cap, cap2, impl, speed;
        const char *speed_s;
        u16 cc;
        const char *scc_s;
 
        vers = readl(mmio + HOST_VERSION);
        cap = hpriv->cap;
+       cap2 = hpriv->cap2;
        impl = hpriv->port_map;
 
        speed = (cap >> 20) & 0xf;
@@ -2583,25 +2626,29 @@ static void ahci_print_info(struct ata_host *host)
                "flags: "
                "%s%s%s%s%s%s%s"
                "%s%s%s%s%s%s%s"
-               "%s\n"
+               "%s%s%s%s%s%s\n"
                ,
 
-               cap & (1 << 31) ? "64bit " : "",
-               cap & (1 << 30) ? "ncq " : "",
-               cap & (1 << 29) ? "sntf " : "",
-               cap & (1 << 28) ? "ilck " : "",
-               cap & (1 << 27) ? "stag " : "",
-               cap & (1 << 26) ? "pm " : "",
-               cap & (1 << 25) ? "led " : "",
-
-               cap & (1 << 24) ? "clo " : "",
-               cap & (1 << 19) ? "nz " : "",
-               cap & (1 << 18) ? "only " : "",
-               cap & (1 << 17) ? "pmp " : "",
-               cap & (1 << 15) ? "pio " : "",
-               cap & (1 << 14) ? "slum " : "",
-               cap & (1 << 13) ? "part " : "",
-               cap & (1 << 6) ? "ems ": ""
+               cap & HOST_CAP_64 ? "64bit " : "",
+               cap & HOST_CAP_NCQ ? "ncq " : "",
+               cap & HOST_CAP_SNTF ? "sntf " : "",
+               cap & HOST_CAP_MPS ? "ilck " : "",
+               cap & HOST_CAP_SSS ? "stag " : "",
+               cap & HOST_CAP_ALPM ? "pm " : "",
+               cap & HOST_CAP_LED ? "led " : "",
+               cap & HOST_CAP_CLO ? "clo " : "",
+               cap & HOST_CAP_ONLY ? "only " : "",
+               cap & HOST_CAP_PMP ? "pmp " : "",
+               cap & HOST_CAP_FBS ? "fbs " : "",
+               cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+               cap & HOST_CAP_SSC ? "slum " : "",
+               cap & HOST_CAP_PART ? "part " : "",
+               cap & HOST_CAP_CCC ? "ccc " : "",
+               cap & HOST_CAP_EMS ? "ems " : "",
+               cap & HOST_CAP_SXS ? "sxs " : "",
+               cap2 & HOST_CAP2_APST ? "apst " : "",
+               cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+               cap2 & HOST_CAP2_BOH ? "boh " : ""
                );
 }
 
@@ -2650,17 +2697,15 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
        }
 }
 
-/*
- * SB600 ahci controller on certain boards can't do 64bit DMA with
- * older BIOS.
- */
-static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
 {
        static const struct dmi_system_id sysids[] = {
                /*
                 * The oldest version known to be broken is 0901 and
                 * working is 1501 which was released on 2007-10-26.
-                * Force 32bit DMA on anything older than 1501.
+                * Enable 64bit DMA on 1501 and anything newer.
+                *
                 * Please read bko#9412 for more info.
                 */
                {
@@ -2672,48 +2717,29 @@ static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
                        },
                        .driver_data = "20071026",      /* yyyymmdd */
                },
-               /*
-                * It's yet unknown whether more recent BIOS fixes the
-                * problem.  Blacklist the whole board for the time
-                * being.  Please read the following thread for more
-                * info.
-                *
-                * http://thread.gmane.org/gmane.linux.ide/42326
-                */
-               {
-                       .ident = "Gigabyte GA-MA69VM-S2",
-                       .matches = {
-                               DMI_MATCH(DMI_BOARD_VENDOR,
-                                         "Gigabyte Technology Co., Ltd."),
-                               DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"),
-                       },
-               },
                { }
        };
        const struct dmi_system_id *match;
+       int year, month, date;
+       char buf[9];
 
        match = dmi_first_match(sysids);
        if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
            !match)
                return false;
 
-       if (match->driver_data) {
-               int year, month, date;
-               char buf[9];
-
-               dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
-               snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
-
-               if (strcmp(buf, match->driver_data) >= 0)
-                       return false;
+       dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+       snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
 
+       if (strcmp(buf, match->driver_data) >= 0) {
+               dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+                          match->ident);
+               return true;
+       } else {
                dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
                           "forcing 32bit DMA, update BIOS\n", match->ident);
-       } else
-               dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't "
-                          "do 64bit DMA, forcing 32bit\n", match->ident);
-
-       return true;
+               return false;
+       }
 }
 
 static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
@@ -2858,6 +2884,50 @@ static bool ahci_broken_online(struct pci_dev *pdev)
        return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
 }
 
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+       static const struct dmi_system_id sysids[] = {
+               /*
+                * Aspire 3810T issues a bunch of SATA enable commands
+                * via _GTF including an invalid one and one which is
+                * rejected by the device.  Among the successful ones
+                * is FPDMA non-zero offset enable which when enabled
+                * only on the drive side leads to NCQ command
+                * failures.  Filter it out.
+                */
+               {
+                       .ident = "Aspire 3810T",
+                       .matches = {
+                               DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+                               DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+                       },
+                       .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+               },
+               { }
+       };
+       const struct dmi_system_id *dmi = dmi_first_match(sysids);
+       unsigned int filter;
+       int i;
+
+       if (!dmi)
+               return;
+
+       filter = (unsigned long)dmi->driver_data;
+       dev_printk(KERN_INFO, host->dev,
+                  "applying extra ACPI _GTF filter 0x%x for %s\n",
+                  filter, dmi->ident);
+
+       for (i = 0; i < host->n_ports; i++) {
+               struct ata_port *ap = host->ports[i];
+               struct ata_link *link;
+               struct ata_device *dev;
+
+               ata_for_each_link(link, ap, EDGE)
+                       ata_for_each_dev(dev, link, ALL)
+                               dev->gtf_filter |= filter;
+       }
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        static int printed_version;
@@ -2926,9 +2996,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
                hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
 
-       /* apply sb600 32bit only quirk */
-       if (ahci_sb600_32bit_only(pdev))
-               hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+       /* only some SB600s can do 64bit DMA */
+       if (ahci_sb600_enable_64bit(pdev))
+               hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
 
        if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
                pci_intx(pdev, 1);
@@ -3023,6 +3093,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        /* apply workaround for ASUS P5W DH Deluxe mainboard */
        ahci_p5wdh_workaround(host);
 
+       /* apply gtf filter quirk */
+       ahci_gtf_filter_workaround(host);
+
        /* initialize adapter */
        rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
        if (rc)
index 01964b6..b0882cd 100644 (file)
 
 #include <acpi/acpi_bus.h>
 
-enum {
-       ATA_ACPI_FILTER_SETXFER = 1 << 0,
-       ATA_ACPI_FILTER_LOCK    = 1 << 1,
-       ATA_ACPI_FILTER_DIPM    = 1 << 2,
-
-       ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
-                                 ATA_ACPI_FILTER_LOCK |
-                                 ATA_ACPI_FILTER_DIPM,
-};
-
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
 
 #define NO_PORT_MULT           0xffff
 #define SATA_ADR(root, pmp)    (((root) << 16) | (pmp))
@@ -613,10 +603,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
        tf->command = gtf->tf[6];       /* 0x1f7 */
 }
 
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+                             const struct ata_taskfile *tf,
                              const struct ata_taskfile *ptf)
 {
-       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+       if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
                /* libata doesn't use ACPI to configure transfer mode.
                 * It will only confuse device configuration.  Skip.
                 */
@@ -625,7 +616,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
                        return 1;
        }
 
-       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+       if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
                /* BIOS writers, sorry but we don't wanna lock
                 * features unless the user explicitly said so.
                 */
@@ -647,12 +638,23 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
                        return 1;
        }
 
-       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+       if (tf->command == ATA_CMD_SET_FEATURES &&
+           tf->feature == SETFEATURES_SATA_ENABLE) {
                /* inhibit enabling DIPM */
-               if (tf->command == ATA_CMD_SET_FEATURES &&
-                   tf->feature == SETFEATURES_SATA_ENABLE &&
+               if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
                    tf->nsect == SATA_DIPM)
                        return 1;
+
+               /* inhibit FPDMA non-zero offset */
+               if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+                   (tf->nsect == SATA_FPDMA_OFFSET ||
+                    tf->nsect == SATA_FPDMA_IN_ORDER))
+                       return 1;
+
+               /* inhibit FPDMA auto activation */
+               if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+                   tf->nsect == SATA_FPDMA_AA)
+                       return 1;
        }
 
        return 0;
@@ -704,7 +706,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
                pptf = &ptf;
        }
 
-       if (!ata_acpi_filter_tf(&tf, pptf)) {
+       if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
                rtf = tf;
                err_mask = ata_exec_internal(dev, &rtf, NULL,
                                             DMA_NONE, NULL, 0, 0);
index 0ddaf43..b525a09 100644 (file)
@@ -5591,6 +5591,9 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
 
                dev->link = link;
                dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+               dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
                ata_dev_init(dev);
        }
 }
index a04488f..0a97822 100644 (file)
@@ -2667,14 +2667,14 @@ int ata_eh_reset(struct ata_link *link, int classify,
                dev->pio_mode = XFER_PIO_0;
                dev->flags &= ~ATA_DFLAG_SLEEPING;
 
-               if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
-                       /* apply class override */
-                       if (lflags & ATA_LFLAG_ASSUME_ATA)
-                               classes[dev->devno] = ATA_DEV_ATA;
-                       else if (lflags & ATA_LFLAG_ASSUME_SEMB)
-                               classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
-               } else
-                       classes[dev->devno] = ATA_DEV_NONE;
+               if (ata_phys_link_offline(ata_dev_phys_link(dev)))
+                       continue;
+
+               /* apply class override */
+               if (lflags & ATA_LFLAG_ASSUME_ATA)
+                       classes[dev->devno] = ATA_DEV_ATA;
+               else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+                       classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
        }
 
        /* record current link speed */
@@ -2713,34 +2713,48 @@ int ata_eh_reset(struct ata_link *link, int classify,
        ap->pflags &= ~ATA_PFLAG_EH_PENDING;
        spin_unlock_irqrestore(link->ap->lock, flags);
 
-       /* Make sure onlineness and classification result correspond.
+       /*
+        * Make sure onlineness and classification result correspond.
         * Hotplug could have happened during reset and some
         * controllers fail to wait while a drive is spinning up after
         * being hotplugged causing misdetection.  By cross checking
-        * link onlineness and classification result, those conditions
-        * can be reliably detected and retried.
+        * link on/offlineness and classification result, those
+        * conditions can be reliably detected and retried.
         */
        nr_unknown = 0;
        ata_for_each_dev(dev, link, ALL) {
-               /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
-               if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
-                       classes[dev->devno] = ATA_DEV_NONE;
-                       if (ata_phys_link_online(ata_dev_phys_link(dev)))
+               if (ata_phys_link_online(ata_dev_phys_link(dev))) {
+                       if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+                               ata_dev_printk(dev, KERN_DEBUG, "link online "
+                                              "but device misclassifed\n");
+                               classes[dev->devno] = ATA_DEV_NONE;
                                nr_unknown++;
+                       }
+               } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
+                       if (ata_class_enabled(classes[dev->devno]))
+                               ata_dev_printk(dev, KERN_DEBUG, "link offline, "
+                                              "clearing class %d to NONE\n",
+                                              classes[dev->devno]);
+                       classes[dev->devno] = ATA_DEV_NONE;
+               } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+                       ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
+                                      "clearing UNKNOWN to NONE\n");
+                       classes[dev->devno] = ATA_DEV_NONE;
                }
        }
 
        if (classify && nr_unknown) {
                if (try < max_tries) {
                        ata_link_printk(link, KERN_WARNING, "link online but "
-                                      "device misclassified, retrying\n");
+                                       "%d devices misclassified, retrying\n",
+                                       nr_unknown);
                        failed_link = link;
                        rc = -EAGAIN;
                        goto fail;
                }
                ata_link_printk(link, KERN_WARNING,
-                              "link online but device misclassified, "
-                              "device detection might fail\n");
+                               "link online but %d devices misclassified, "
+                               "device detection might fail\n", nr_unknown);
        }
 
        /* reset successful, schedule revalidation */
index be8e262..823e630 100644 (file)
@@ -118,6 +118,8 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
 extern void ata_acpi_associate_sata_port(struct ata_port *ap);
 extern void ata_acpi_associate(struct ata_host *host);
 extern void ata_acpi_dissociate(struct ata_host *host);
index fc9c5d6..1432dc9 100644 (file)
@@ -290,7 +290,7 @@ static void ali_warn_atapi_dma(struct ata_device *adev)
 
        if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
                ata_dev_printk(adev, KERN_WARNING,
-                              "WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled\n");
+                              "WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled\n");
                ata_dev_printk(adev, KERN_WARNING,
                               "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
        }
index 7990de9..6fe7ded 100644 (file)
@@ -118,20 +118,13 @@ struct atp867x_priv {
        int             pci66mhz;
 };
 
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
-       return speed - XFER_UDMA_0 + 1;
-}
-
 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
        struct atp867x_priv *dp = ap->private_data;
        u8 speed = adev->dma_mode;
        u8 b;
-       u8 mode;
-
-       mode = atp867x_speed_to_mode(speed);
+       u8 mode = speed - XFER_UDMA_0 + 1;
 
        /*
         * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
        iowrite8(b, dp->dma_mode);
 }
 
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+       unsigned int clk)
 {
+       struct atp867x_priv *dp = ap->private_data;
        unsigned char clocks = clk;
 
+       /*
+        * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+        * on 66MHz bus
+        */
+       if (dp->pci66mhz)
+               clocks++;
+
        switch (clocks) {
        case 0:
                clocks = 1;
                break;
-       case 1 ... 7:
-               break;
-       case 8 ... 12:
-               clocks = 7;
+       case 1 ... 6:
                break;
        default:
                printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
-                       "Using default 8clk.\n", clk);
-               clocks = 0;     /* 8 clk */
+                       "Using 12clk.\n", clk);
+       case 9 ... 12:
+               clocks = 7;     /* 12 clk */
                break;
+       case 7:
+       case 8: /* default 8 clk */
+               clocks = 0;
+               goto active_clock_shift_done;
        }
+
+active_clock_shift_done:
        return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 }
 
@@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk)
                break;
        case 1 ... 11:
                break;
-       case 12:
-               clocks = 0;
-               break;
-       case 13: case 14:
-               --clocks;
+       case 13:
+       case 14:
+               --clocks;       /* by the spec */
                break;
        case 15:
                break;
        default:
                printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
-                       "Using default 15clk.\n", clk);
-               clocks = 0;     /* 12 clk */
+                       "Using default 12clk.\n", clk);
+       case 12:        /* default 12 clk */
+               clocks = 0;
                break;
        }
+
        return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
 }
 
@@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
                b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
        iowrite8(b, dp->dma_mode);
 
-       b = atp867x_get_active_clocks_shifted(t.active) |
-               atp867x_get_recover_clocks_shifted(t.recover);
-       if (dp->pci66mhz)
-               b += 0x10;
+       b = atp867x_get_active_clocks_shifted(ap, t.active) |
+           atp867x_get_recover_clocks_shifted(t.recover);
 
        if (adev->devno & 1)
                iowrite8(b, dp->slave_piospd);
        else
                iowrite8(b, dp->mstr_piospd);
 
-       /*
-        * use the same value for comand timing as for PIO timimg
-        */
+       b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+           atp867x_get_recover_clocks_shifted(t.rec8b);
+
        iowrite8(b, dp->eightb_piospd);
 }
 
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+       if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+               (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+                pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+               return 1;
+       }
+       return 0;
+}
+
 static int atp867x_cable_detect(struct ata_port *ap)
 {
-       return ATA_CBL_PATA40_SHORT;
+       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+       if (atp867x_cable_override(pdev))
+               return ATA_CBL_PATA40_SHORT;
+
+       return ATA_CBL_PATA_UNK;
 }
 
 static struct scsi_host_template atp867x_sht = {
@@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev,
        static const struct ata_port_info info_867x = {
                .flags          = ATA_FLAG_SLAVE_POSS,
                .pio_mask       = ATA_PIO4,
-               .mwdma_mask     = ATA_MWDMA2,
                .udma_mask      = ATA_UDMA6,
                .port_ops       = &atp867x_ops,
        };
@@ -515,6 +533,23 @@ err_out:
        return rc;
 }
 
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+       struct ata_host *host = dev_get_drvdata(&pdev->dev);
+       int rc;
+
+       rc = ata_pci_device_do_resume(pdev);
+       if (rc)
+               return rc;
+
+       atp867x_fixup(host);
+
+       ata_host_resume(host);
+       return 0;
+}
+#endif
+
 static struct pci_device_id atp867x_pci_tbl[] = {
        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),      0 },
        { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),      0 },
@@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = {
        .id_table       = atp867x_pci_tbl,
        .probe          = atp867x_init_one,
        .remove         = ata_pci_remove_one,
+#ifdef CONFIG_PM
+       .suspend        = ata_pci_device_suspend,
+       .resume         = atp867x_reinit_one,
+#endif
 };
 
 static int __init atp867x_init(void)
index 6299a25..4fb3573 100644 (file)
@@ -334,9 +334,12 @@ enum {
        SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
 
        /* SETFEATURE Sector counts for SATA features */
-       SATA_AN                 = 0x05,  /* Asynchronous Notification */
-       SATA_DIPM               = 0x03,  /* Device Initiated Power Management */
-       SATA_FPDMA_AA           = 0x02,  /* DMA Setup FIS Auto-Activate */
+       SATA_FPDMA_OFFSET       = 0x01, /* FPDMA non-zero buffer offsets */
+       SATA_FPDMA_AA           = 0x02, /* FPDMA Setup FIS Auto-Activate */
+       SATA_DIPM               = 0x03, /* Device Initiated Power Management */
+       SATA_FPDMA_IN_ORDER     = 0x04, /* FPDMA in-order data delivery */
+       SATA_AN                 = 0x05, /* Asynchronous Notification */
+       SATA_SSP                = 0x06, /* Software Settings Preservation */
 
        /* feature values for SET_MAX */
        ATA_SET_MAX_ADDR        = 0x00,
index 76319bf..8769864 100644 (file)
@@ -418,6 +418,17 @@ enum {
                                  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
                                  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
                                  ATA_TIMING_UDMA,
+
+       /* ACPI constants */
+       ATA_ACPI_FILTER_SETXFER = 1 << 0,
+       ATA_ACPI_FILTER_LOCK    = 1 << 1,
+       ATA_ACPI_FILTER_DIPM    = 1 << 2,
+       ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,  /* FPDMA non-zero offset */
+       ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,      /* FPDMA auto activate */
+
+       ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
+                                 ATA_ACPI_FILTER_LOCK |
+                                 ATA_ACPI_FILTER_DIPM,
 };
 
 enum ata_xfer_mask {
@@ -587,6 +598,7 @@ struct ata_device {
 #ifdef CONFIG_ATA_ACPI
        acpi_handle             acpi_handle;
        union acpi_object       *gtf_cache;
+       unsigned int            gtf_filter;
 #endif
        /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
        u64                     n_sectors;      /* size of device, if ATA */