Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
| unsigned char_ b_ModulNbr CR_AREF(aref) : Selected module number (0 to 3)|
| unsigned char_ b_PortValue CR_CHAN(chanspec) : Output Value ( 0 To 7 )
| data[0] read or write port
- data[1] if write then indicate ON or OFF
+| data[1] if write then indicate ON or OFF
- if read : data[1] will return port status.
+| if read : data[1] will return port status.
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
| Return Value :
- INPUT :
+| INPUT :
0: No error |
| -1: The handle parameter of the board is wrong |
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
this_board->pc_DriverName);
if ((ret = alloc_private(dev, sizeof(struct addi_private))) < 0) {
- return -ENOMEM;
+ return -ENOMEM;
}
if (!pci_list_builded) {
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
| |
| data[0] : 0 Configure As Timer |
| 1 Configure As Watchdog |
- data[1] : Watchdog number
+| data[1] : Watchdog number
| data[2] : Time base Unit |
| data[3] : Reload Value |
- data[4] : External Trigger |
- 1:Enable
- 0:Disable
- data[5] :External Trigger Level
- 00 Trigger Disabled
- 01 Trigger Enabled (Low level)
- 10 Trigger Enabled (High Level)
- 11 Trigger Enabled (High/Low level)
- data[6] : External Gate |
- 1:Enable
- 0:Disable
- data[7] : External Gate level
- 00 Gate Disabled
- 01 Gate Enabled (Low level)
- 10 Gate Enabled (High Level)
- data[8] :Warning Relay
- 1: ENABLE
- 0: DISABLE
- data[9] :Warning Delay available
- data[10] :Warning Relay Time unit
- data[11] :Warning Relay Time Reload value
- data[12] :Reset Relay
- 1 : ENABLE
- 0 : DISABLE
- data[13] :Interrupt
- 1 : ENABLE
- 0 : DISABLE
-
+| data[4] : External Trigger |
+| 1:Enable
+| 0:Disable
+| data[5] :External Trigger Level
+| 00 Trigger Disabled
+| 01 Trigger Enabled (Low level)
+| 10 Trigger Enabled (High Level)
+| 11 Trigger Enabled (High/Low level)
+| data[6] : External Gate |
+| 1:Enable
+| 0:Disable
+| data[7] : External Gate level
+| 00 Gate Disabled
+| 01 Gate Enabled (Low level)
+| 10 Gate Enabled (High Level)
+| data[8] :Warning Relay
+| 1: ENABLE
+| 0: DISABLE
+| data[9] :Warning Delay available
+| data[10] :Warning Relay Time unit
+| data[11] :Warning Relay Time Reload value
+| data[12] :Reset Relay
+| 1 : ENABLE
+| 0 : DISABLE
+| data[13] :Interrupt
+| 1 : ENABLE
+| 0 : DISABLE
+|
|
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| |
+----------------------------------------------------------------------------+
| Output Parameters : data[0] : software trigger status
- data[1] : hardware trigger status
-| data[2] : Software clear status
- data[3] : Overflow status
- data[4] : Timer actual value
-
+| data[1] : hardware trigger status
+| data[2] : Software clear status
+| data[3] : Overflow status
+| data[4] : Timer actual value
+|
+----------------------------------------------------------------------------+
| Return Value : TRUE : No error occur |
{
unsigned int ui_Status = 0; /* Status register */
i_WatchdogNbr = insn->unused[0];
- /******************/
+
+ /******************/
/* Get the status */
- /******************/
+ /******************/
+
ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
- /***********************************/
+
+ /***********************************/
/* Get the software trigger status */
- /***********************************/
+ /***********************************/
+
data[0] = ((ui_Status >> 1) & 1);
- /***********************************/
+ /***********************************/
/* Get the hardware trigger status */
- /***********************************/
+ /***********************************/
data[1] = ((ui_Status >> 2) & 1);
- /*********************************/
+ /*********************************/
/* Get the software clear status */
- /*********************************/
+ /*********************************/
data[2] = ((ui_Status >> 3) & 1);
- /***************************/
+ /***************************/
/* Get the overflow status */
- /***************************/
+ /***************************/
data[3] = ((ui_Status >> 0) & 1);
if (devpriv->b_TimerSelectMode == ADDIDATA_TIMER) {
data[4] = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 0);
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
| data[0] :Number of the input port on |
| which the event will take place |
| (1 or 2)
- data[1] : The event logic for port 1 has |
+| data[1] : The event logic for port 1 has |
| three possibilities |
| :0 APCI1500_AND :This logic |
| links |
| Input Parameters : struct comedi_device *dev : Driver handle |
| unsigned int ui_Channel : Channel number to read |
| unsigned int *data : Data Pointer to read status |
- data[0] :0 Start input event
- 1 Stop input event
- data[1] :No of port (1 or 2)
+| data[0] :0 Start input event
+| 1 Stop input event
+| data[1] :No of port (1 or 2)
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| unsigned int ui_NoOfChannels : No Of Channels To be Read |
| unsigned int *data : Data Pointer
- data[0] : 0 Read a single channel
- 1 read a port value
- data[1] : port value
+| data[0] : 0 Read a single channel
+| 1 read a port value
+| data[1] : port value
+----------------------------------------------------------------------------+
| Output Parameters : -- data[0] :The read status value
+----------------------------------------------------------------------------+
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ConfigDigitalOutputErrorInterrupt
- (struct comedi_device *dev,struct comedi_subdevice *s struct comedi_insn
- *insn,unsigned int *data) |
+| (struct comedi_device *dev,struct comedi_subdevice *s struct comedi_insn
+| *insn,unsigned int *data) |
| |
+----------------------------------------------------------------------------+
| Task : Configures the digital output memory and the digital
- output error interrupt |
+| output error interrupt |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| data[0] :1:Memory on |
| 0:Memory off |
- data[1] :1 Enable the voltage error interrupt
+| data[1] :1 Enable the voltage error interrupt
| :0 Disable the voltage error interrupt |
| |
+----------------------------------------------------------------------------+
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ConfigCounterTimerWatchdog(comedi_device
- *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
+| *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
| |
+----------------------------------------------------------------------------+
| Task : Configures The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status data[0] : 2 APCI1500_1_8_KHZ
| 1 APCI1500_3_6_KHZ |
| 0 APCI1500_115_KHZ
- data[1] : 0 Counter1/Timer1
- 1 Counter2/Timer2
- 2 Counter3/Watchdog
- data[2] : 0 Counter
- 1 Timer/Watchdog
- data[3] : This parameter has |
+| data[1] : 0 Counter1/Timer1
+| 1 Counter2/Timer2
+| 2 Counter3/Watchdog
+| data[2] : 0 Counter
+| 1 Timer/Watchdog
+| data[3] : This parameter has |
| two meanings. |
| - If the counter/timer |
| is used as a counter |
| the divider factor |
| for the output is |
| given.
- data[4] : 0 APCI1500_CONTINUOUS
- 1 APCI1500_SINGLE
- data[5] : 0 Software Trigger
- 1 Hardware Trigger
-
- data[6] :0 Software gate
- 1 Hardware gate
- data[7] :0 Interrupt Disable
- 1 Interrupt Enable
+| data[4] : 0 APCI1500_CONTINUOUS
+| 1 APCI1500_SINGLE
+| data[5] : 0 Software Trigger
+| 1 Hardware Trigger
+|
+| data[6] :0 Software gate
+| 1 Hardware gate
+| data[7] :0 Interrupt Disable
+| 1 Interrupt Enable
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_StartStopTriggerTimerCounterWatchdog |
| (struct comedi_device *dev,struct comedi_subdevice *s,
- struct comedi_insn *insn,unsigned int *data); |
+| struct comedi_insn *insn,unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Start / Stop or trigger the timer counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
- data[0] : 0 Counter1/Timer1
- 1 Counter2/Timer2
- 2 Counter3/Watchdog
- data[1] : 0 start
- 1 stop
- 2 Trigger
- data[2] : 0 Counter
- 1 Timer/Watchdog
+| data[0] : 0 Counter1/Timer1
+| 1 Counter2/Timer2
+| 2 Counter3/Watchdog
+| data[1] : 0 start
+| 1 stop
+| 2 Trigger
+| data[2] : 0 Counter
+| 1 Timer/Watchdog
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ReadCounterTimerWatchdog |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
+| unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Read The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
- data[0] : 0 Counter1/Timer1
- 1 Counter2/Timer2
- 2 Counter3/Watchdog
-
+| data[0] : 0 Counter1/Timer1
+| 1 Counter2/Timer2
+| 2 Counter3/Watchdog
+|
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ReadInterruptMask |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
+| unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Read the interrupt mask |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1500_ConfigureInterrupt |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
+| unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Configures the interrupt registers |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer |
-
+|
+----------------------------------------------------------------------------+
| Output Parameters : --
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1516_ConfigDigitalOutput (struct comedi_device *dev,
- struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
+| struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
| |
+----------------------------------------------------------------------------+
| Task : Configures The Digital Output Subdevice. |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| data[0] :1:Memory on |
| 0:Memory off |
| |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1516_WriteDigitalOutput |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data) |
+| unsigned int *data) |
+----------------------------------------------------------------------------+
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1516_ReadDigitalOutput |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data) |
+| unsigned int *data) |
+----------------------------------------------------------------------------+
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI1516_ConfigWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
+| struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
| |
+----------------------------------------------------------------------------+
| Task : Configures The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2032_ConfigWatchdog(comedi_device
- *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
+| *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data)|
| |
+----------------------------------------------------------------------------+
| Task : Configures The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2032_ReadWatchdog |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
+| unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Read The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_ConfigDigitalOutput (struct comedi_device *dev,
- struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
+| struct comedi_subdevice *s struct comedi_insn *insn,unsigned int *data) |
| |
+----------------------------------------------------------------------------+
| Task : Configures The Digital Output Subdevice. |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| data[0] :1:Memory on |
| 0:Memory off |
| |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_WriteDigitalOutput |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data) |
+| unsigned int *data) |
+----------------------------------------------------------------------------+
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_ReadDigitalOutput |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data) |
+| unsigned int *data) |
+----------------------------------------------------------------------------+
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
- struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
+| struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data) |
| |
+----------------------------------------------------------------------------+
| Task : Configures The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2200_ReadWatchdog |
| (struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,
- unsigned int *data); |
+| unsigned int *data); |
+----------------------------------------------------------------------------+
| Task : Read The Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| struct comedi_subdevice *s, :pointer to subdevice structure
- struct comedi_insn *insn :pointer to insn structure |
+| struct comedi_insn *insn :pointer to insn structure |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
us_TmpValue = (unsigned short) inw(dev->iobase + APCI3120_RD_STATUS);
/*** EL241003 : add this section in comment because floats must not be used
- if((us_TmpValue & 0x00B0)==0x00B0)
+ if((us_TmpValue & 0x00B0)==0x00B0)
{
- f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2);
+ f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2);
ui_TimerValue0=(unsigned int)f_ConvertValue;
if (mode==2)
{
ui_TimerValue1 = (unsigned int) f_DelayValue;
}
}
- else
+ else
{
f_ConvertValue=(((float)ui_ConvertTiming * 0.0012926) - 1);
ui_TimerValue0=(unsigned int)f_ConvertValue;
| struct comedi_subdevice *s |
| struct comedi_insn *insn |
| unsigned int *data |
- data[0] Value to be written
- data[1] :1 Set digital o/p ON
- data[1] 2 Set digital o/p OFF with memory ON
+| data[0] Value to be written
+| data[1] :1 Set digital o/p ON
+| data[1] 2 Set digital o/p OFF with memory ON
+----------------------------------------------------------------------------+
| Return Value : |
| |
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- ADDI-DATA GmbH
- Dieselstrasse 3
- D-77833 Ottersweier
- Tel: +19(0)7223/9493-0
- Fax: +49(0)7223/9493-92
- http://www.addi-data-com
- info@addi-data.com
+ ADDI-DATA GmbH
+ Dieselstrasse 3
+ D-77833 Ottersweier
+ Tel: +19(0)7223/9493-0
+ Fax: +49(0)7223/9493-92
+ http://www.addi-data-com
+ info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
static long tty_ioctl(struct file *f, unsigned op, unsigned long param)
{
#ifdef HAVE_UNLOCKED_IOCTL
- if (f->f_op->unlocked_ioctl) {
+ if (f->f_op->unlocked_ioctl) {
return f->f_op->unlocked_ioctl(f, op, param);
}
#endif
if (f->f_op->ioctl) {
- return f->f_op->ioctl(f->f_dentry->d_inode, f, op, param);
+ return f->f_op->ioctl(f->f_dentry->d_inode, f, op, param);
}
return -ENOSYS;
}
/* Device does not support poll, busy wait */
int retries = 0;
while (1) {
- unsigned char ch;
+ unsigned char ch;
retries++;
if (retries >= timeout) {
f->f_pos = 0;
if (f->f_op->read(f, &ch, 1, &f->f_pos) == 1) {
- result = ch;
+ result = ch;
break;
}
comedi_udelay(100);
const struct comedi_lrange range_unknown = { 1, {{0, 1000000, UNIT_none}} };
/*
- COMEDI_RANGEINFO
+ COMEDI_RANGEINFO
range information ioctl
arg:
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff