hwmon: (lm85) Implement the standard PWM frequency interface

Implement the standard PWM frequency interface: pwm[1-*]_freq in
units of 1 Hz, instead of the non-standard pwm[1-*]_auto_pwm_freq
in units of 0.1 Hz. The old naming was not only non-standard, it was
also confusing, because it suggested that the frequency value only
applied in automatic fan speed mode, which isn't true.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>

diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 6d41db7..4006207 100644 (file)
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -163,16 +163,6 @@ configured individually according to the following options.
 * pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off
                       temperature. (PWM value from 0 to 255)
 
-* pwm#_auto_pwm_freq - select base frequency of PWM output. You can select
-                       in range of 10.0 to 94.0 Hz in .1 Hz units.
-                      (Values 100 to 940).
-
-The pwm#_auto_pwm_freq can be set to one of the following 8 values. Setting the
-frequency to a value not on this list, will result in the next higher frequency
-being selected. The actual device frequency may vary slightly from this
-specification as designed by the manufacturer. Consult the datasheet for more
-details. (PWM Frequency values:  100, 150, 230, 300, 380, 470, 620, 940)
-
 * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature
                          the bahaviour of fans. Write 1 to let fans spinning at
                         pwm#_auto_pwm_min or write 0 to let them off.

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 3594a02..6b676df 100644 (file)
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -191,8 +191,8 @@ static int RANGE_TO_REG(int range)
 #define RANGE_FROM_REG(val)    lm85_range_map[(val) & 0x0f]
 
 /* These are the PWM frequency encodings */
-static const int lm85_freq_map[] = { /* .1 Hz */
-       100, 150, 230, 300, 380, 470, 620, 940
+static const int lm85_freq_map[8] = { /* 1 Hz */
+       10, 15, 23, 30, 38, 47, 62, 94
 };
 
 static int FREQ_TO_REG(int freq)
@@ -275,7 +275,6 @@ struct lm85_zone {
 
 struct lm85_autofan {
        u8 config;      /* Register value */
-       u8 freq;        /* PWM frequency, encoded */
        u8 min_pwm;     /* Minimum PWM value, encoded */
        u8 min_off;     /* Min PWM or OFF below "limit", flag */
 };
@@ -301,6 +300,7 @@ struct lm85_data {
        u16 fan[4];             /* Register value */
        u16 fan_min[4];         /* Register value */
        u8 pwm[3];              /* Register value */
+       u8 pwm_freq[3];         /* Register encoding */
        u8 temp_ext[3];         /* Decoded values */
        u8 in_ext[8];           /* Decoded values */
        u8 vid;                 /* Register value */
@@ -528,11 +528,38 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
        return count;
 }
 
+static ssize_t show_pwm_freq(struct device *dev,
+               struct device_attribute *attr, char *buf)
+{
+       int nr = to_sensor_dev_attr(attr)->index;
+       struct lm85_data *data = lm85_update_device(dev);
+       return sprintf(buf, "%d\n", FREQ_FROM_REG(data->pwm_freq[nr]));
+}
+
+static ssize_t set_pwm_freq(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+{
+       int nr = to_sensor_dev_attr(attr)->index;
+       struct i2c_client *client = to_i2c_client(dev);
+       struct lm85_data *data = i2c_get_clientdata(client);
+       long val = simple_strtol(buf, NULL, 10);
+
+       mutex_lock(&data->update_lock);
+       data->pwm_freq[nr] = FREQ_TO_REG(val);
+       lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+               (data->zone[nr].range << 4)
+               | data->pwm_freq[nr]);
+       mutex_unlock(&data->update_lock);
+       return count;
+}
+
 #define show_pwm_reg(offset)                                           \
 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,              \
                show_pwm, set_pwm, offset - 1);                         \
 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,     \
-               show_pwm_enable, set_pwm_enable, offset - 1)
+               show_pwm_enable, set_pwm_enable, offset - 1);           \
+static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR,       \
+               show_pwm_freq, set_pwm_freq, offset - 1)
 
 show_pwm_reg(1);
 show_pwm_reg(2);
@@ -761,31 +788,6 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev,
        return count;
 }
 
-static ssize_t show_pwm_auto_pwm_freq(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       int nr = to_sensor_dev_attr(attr)->index;
-       struct lm85_data *data = lm85_update_device(dev);
-       return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
-}
-
-static ssize_t set_pwm_auto_pwm_freq(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t count)
-{
-       int nr = to_sensor_dev_attr(attr)->index;
-       struct i2c_client *client = to_i2c_client(dev);
-       struct lm85_data *data = i2c_get_clientdata(client);
-       long val = simple_strtol(buf, NULL, 10);
-
-       mutex_lock(&data->update_lock);
-       data->autofan[nr].freq = FREQ_TO_REG(val);
-       lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
-               (data->zone[nr].range << 4)
-               | data->autofan[nr].freq);
-       mutex_unlock(&data->update_lock);
-       return count;
-}
-
 #define pwm_auto(offset)                                               \
 static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels,                 \
                S_IRUGO | S_IWUSR, show_pwm_auto_channels,              \
@@ -795,10 +797,7 @@ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min,                      \
                set_pwm_auto_pwm_min, offset - 1);                      \
 static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl,               \
                S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl,            \
-               set_pwm_auto_pwm_minctl, offset - 1);                   \
-static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_freq,                 \
-               S_IRUGO | S_IWUSR, show_pwm_auto_pwm_freq,              \
-               set_pwm_auto_pwm_freq, offset - 1);
+               set_pwm_auto_pwm_minctl, offset - 1)
 
 pwm_auto(1);
 pwm_auto(2);
@@ -867,7 +866,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
                TEMP_FROM_REG(data->zone[nr].limit));
        lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
                ((data->zone[nr].range & 0x0f) << 4)
-               | (data->autofan[nr].freq & 0x07));
+               | (data->pwm_freq[nr] & 0x07));
 
 /* Update temp_auto_hyst and temp_auto_off */
        data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
@@ -910,7 +909,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev,
                val - min);
        lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
                ((data->zone[nr].range & 0x0f) << 4)
-               | (data->autofan[nr].freq & 0x07));
+               | (data->pwm_freq[nr] & 0x07));
        mutex_unlock(&data->update_lock);
        return count;
 }
@@ -984,6 +983,9 @@ static struct attribute *lm85_attributes[] = {
        &sensor_dev_attr_pwm1_enable.dev_attr.attr,
        &sensor_dev_attr_pwm2_enable.dev_attr.attr,
        &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+       &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+       &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+       &sensor_dev_attr_pwm3_freq.dev_attr.attr,
 
        &sensor_dev_attr_in0_input.dev_attr.attr,
        &sensor_dev_attr_in1_input.dev_attr.attr,
@@ -1026,9 +1028,6 @@ static struct attribute *lm85_attributes[] = {
        &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
        &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
        &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
-       &sensor_dev_attr_pwm1_auto_pwm_freq.dev_attr.attr,
-       &sensor_dev_attr_pwm2_auto_pwm_freq.dev_attr.attr,
-       &sensor_dev_attr_pwm3_auto_pwm_freq.dev_attr.attr,
 
        &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
        &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
@@ -1458,7 +1457,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                        data->autofan[i].config =
                            lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
                        val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
-                       data->autofan[i].freq = val & 0x07;
+                       data->pwm_freq[i] = val & 0x07;
                        data->zone[i].range = val >> 4;
                        data->autofan[i].min_pwm =
                            lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));