Moved duplicated code to separate files.
LNBP21 stuff rewritten from scratch, BSBE1 copied from av7110.c.
Modified budget driver to use the new routines.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
struct dvb_adapter *dvb;
void* demodulator_priv;
void* frontend_priv;
+ void* misc_priv;
};
extern int dvb_register_frontend(struct dvb_adapter* dvb,
--- /dev/null
+/*
+ * bsbe1.h - ALPS BSBE1 tuner support (moved from av7110.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef BSBE1_H
+#define BSBE1_H
+
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb9,
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+
+static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+ u8 aclk = 0;
+ u8 bclk = 0;
+
+ if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+ else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+ else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+ else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+ else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+ else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+ stv0299_writereg(fe, 0x13, aclk);
+ stv0299_writereg(fe, 0x14, bclk);
+ stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, 0x21, (ratio ) & 0xf0);
+
+ return 0;
+}
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
+{
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(i2c, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsbe1_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
+#endif
--- /dev/null
+/*
+ * lnbp21.h - driver for lnb supply and control ic lnbp21
+ *
+ * Copyright (C) 2006 Oliver Endriss
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP21_H
+#define _LNBP21_H
+
+/* system register */
+#define LNBP21_OLF 0x01
+#define LNBP21_OTF 0x02
+#define LNBP21_EN 0x04
+#define LNBP21_VSEL 0x08
+#define LNBP21_LLC 0x10
+#define LNBP21_TEN 0x20
+#define LNBP21_ISEL 0x40
+#define LNBP21_PCL 0x80
+
+struct lnbp21 {
+ u8 config;
+ u8 override_or;
+ u8 override_and;
+ struct i2c_adapter *i2c;
+ void (*release_chain)(struct dvb_frontend* fe);
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0,
+ .buf = &lnbp21->config,
+ .len = sizeof(lnbp21->config) };
+
+ lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN);
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ lnbp21->config |= LNBP21_EN;
+ break;
+ case SEC_VOLTAGE_18:
+ lnbp21->config |= (LNBP21_EN | LNBP21_VSEL);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ lnbp21->config |= lnbp21->override_or;
+ lnbp21->config &= lnbp21->override_and;
+
+ return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0,
+ .buf = &lnbp21->config,
+ .len = sizeof(lnbp21->config) };
+
+ if (arg)
+ lnbp21->config |= LNBP21_LLC;
+ else
+ lnbp21->config &= ~LNBP21_LLC;
+
+ lnbp21->config |= lnbp21->override_or;
+ lnbp21->config &= lnbp21->override_and;
+
+ return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static void lnbp21_exit(struct dvb_frontend *fe)
+{
+ struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+
+ /* LNBP power off */
+ lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+ /* free data & call next release routine */
+ fe->ops->release = lnbp21->release_chain;
+ kfree(fe->misc_priv);
+ fe->misc_priv = NULL;
+ if (fe->ops->release)
+ fe->ops->release(fe);
+}
+
+static int lnbp21_init(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear)
+{
+ struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL);
+
+ if (!lnbp21)
+ return -ENOMEM;
+
+ /* default configuration */
+ lnbp21->config = LNBP21_ISEL;
+
+ /* bits which should be forced to '1' */
+ lnbp21->override_or = override_set;
+
+ /* bits which should be forced to '0' */
+ lnbp21->override_and = ~override_clear;
+
+ /* install release callback */
+ lnbp21->release_chain = fe->ops->release;
+ fe->ops->release = lnbp21_exit;
+
+ /* override frontend ops */
+ fe->ops->set_voltage = lnbp21_set_voltage;
+ fe->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
+
+ lnbp21->i2c = i2c;
+ fe->misc_priv = lnbp21;
+
+ return lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+}
+
+#endif
#include "l64781.h"
#include "tda8083.h"
#include "s5h1420.h"
+#include "lnbp21.h"
+#include "bsbe1.h"
static void Set22K (struct budget *budget, int state)
{
return 0;
}
-static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- switch(voltage) {
- case SEC_VOLTAGE_13:
- buf = (buf & 0xf7) | 0x04;
- break;
-
- case SEC_VOLTAGE_18:
- buf = (buf & 0xf7) | 0x0c;
- break;
-
- case SEC_VOLTAGE_OFF:
- buf = buf & 0xf0;
- break;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, long arg)
-{
- struct budget* budget = (struct budget*) fe->dvb->priv;
- u8 buf;
- struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- if (arg) {
- buf = buf | 0x10;
- } else {
- buf = buf & 0xef;
- }
-
- msg.flags = 0;
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
- return 0;
-}
-
-static int lnbp21_init(struct budget* budget)
-{
- u8 buf = 0x00;
- struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };
-
- if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
.pll_set = alps_bsru6_pll_set,
};
-static u8 alps_bsbe1_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x30,
- 0x03, 0x00,
- 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
- 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
- 0x06, 0x40, /* DAC not used, set to high impendance mode */
- 0x07, 0x00, /* DAC LSB */
- 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
- 0x09, 0x00, /* FIFO */
- 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
- 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
- 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
- 0x10, 0x3f, // AGC2 0x3d
- 0x11, 0x84,
- 0x12, 0xb9,
- 0x15, 0xc9, // lock detector threshold
- 0x16, 0x00,
- 0x17, 0x00,
- 0x18, 0x00,
- 0x19, 0x00,
- 0x1a, 0x00,
- 0x1f, 0x50,
- 0x20, 0x00,
- 0x21, 0x00,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
- 0x29, 0x1e, // 1/2 threshold
- 0x2a, 0x14, // 2/3 threshold
- 0x2b, 0x0f, // 3/4 threshold
- 0x2c, 0x09, // 5/6 threshold
- 0x2d, 0x05, // 7/8 threshold
- 0x2e, 0x01,
- 0x31, 0x1f, // test all FECs
- 0x32, 0x19, // viterbi and synchro search
- 0x33, 0xfc, // rs control
- 0x34, 0x93, // error control
- 0x0f, 0x92, // 0x80 = inverse AGC
- 0xff, 0xff
-};
-
-static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
- int ret;
- u8 data[4];
- u32 div;
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
- if ((params->frequency < 950000) || (params->frequency > 2150000))
- return -EINVAL;
-
- div = (params->frequency + (125 - 1)) / 125; // round correctly
- data[0] = (div >> 8) & 0x7f;
- data[1] = div & 0xff;
- data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
- data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
-
- ret = i2c_transfer(i2c, &msg, 1);
- return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
- .demod_address = 0x68,
- .inittab = alps_bsbe1_inittab,
- .mclk = 88000000UL,
- .invert = 1,
- .skip_reinit = 0,
- .min_delay_ms = 100,
- .set_symbol_rate = alps_bsru6_set_symbol_rate,
- .pll_set = alps_bsbe1_pll_set,
-};
-
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
// try the ALPS BSBE1 now
budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
- if (lnbp21_init(budget)) {
+ if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, LNBP21_LLC, 0)) {
printk("%s: No LNBP21 found!\n", __FUNCTION__);
goto error_out;
}
case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
- budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
- budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
- if (lnbp21_init(budget)) {
+ if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) {
printk("%s: No LNBP21 found!\n", __FUNCTION__);
goto error_out;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff