ioc3/ioc4: various section fixes

Several IOC3 and IOC4 drivers misuse the __devinit and __devexit section
markers.  Use __init and __exit instead as appropriate, then add __devinit
and __devexit where they really belong for PCI drivers.

Also make ioc4_serial_init static.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 60b0b1a..09dcb69 100644 (file)
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -138,7 +138,7 @@ ioc4_unregister_submodule(struct ioc4_submodule *is)
  * even though the following code utilizes external interrupt registers
  * to perform the speed calculation.
  */
-static void
+static void __devinit
 ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 {
        union ioc4_int_out int_out;
@@ -230,7 +230,7 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
  * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
  * If neither is present, it's a PCI-RT.
  */
-static unsigned int
+static unsigned int __devinit
 ioc4_variant(struct ioc4_driver_data *idd)
 {
        struct pci_dev *pdev = NULL;
@@ -269,7 +269,7 @@ ioc4_variant(struct ioc4_driver_data *idd)
        return IOC4_VARIANT_PCI_RT;
 }
 
-static void
+static void __devinit
 ioc4_load_modules(struct work_struct *work)
 {
        /* arg just has to be freed */
@@ -280,7 +280,7 @@ ioc4_load_modules(struct work_struct *work)
 }
 
 /* Adds a new instance of an IOC4 card */
-static int
+static int __devinit
 ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
        struct ioc4_driver_data *idd;
@@ -425,7 +425,7 @@ out:
 }
 
 /* Removes a particular instance of an IOC4 card. */
-static void
+static void __devexit
 ioc4_remove(struct pci_dev *pdev)
 {
        struct ioc4_submodule *is;
@@ -476,7 +476,7 @@ static struct pci_driver ioc4_driver = {
        .name = "IOC4",
        .id_table = ioc4_id_table,
        .probe = ioc4_probe,
-       .remove = ioc4_remove,
+       .remove = __devexit_p(ioc4_remove),
 };
 
 MODULE_DEVICE_TABLE(pci, ioc4_id_table);
@@ -486,14 +486,14 @@ MODULE_DEVICE_TABLE(pci, ioc4_id_table);
  *********************/
 
 /* Module load */
-static int __devinit
+static int __init
 ioc4_init(void)
 {
        return pci_register_driver(&ioc4_driver);
 }
 
 /* Module unload */
-static void __devexit
+static void __exit
 ioc4_exit(void)
 {
        /* Ensure ioc4_load_modules() has completed before exiting */

diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index d8983dd..85dc041 100644 (file)
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_ops = {
 /**
  * ioc3_detect - module init called,
  */
-static int __devinit ioc3uart_init(void)
+static int __init ioc3uart_init(void)
 {
        int ret;
 
@@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void)
        return ret;
 }
 
-static void __devexit ioc3uart_exit(void)
+static void __exit ioc3uart_exit(void)
 {
        ioc3_unregister_submodule(&ioc3uart_ops);
        uart_unregister_driver(&ioc3_uart);

diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 2e02c30..902b067 100644 (file)
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial_submodule = {
 /**
  * ioc4_serial_init - module init
  */
-int ioc4_serial_init(void)
+static int __init ioc4_serial_init(void)
 {
        int ret;
 
@@ -2926,7 +2926,7 @@ int ioc4_serial_init(void)
        return ioc4_register_submodule(&ioc4_serial_submodule);
 }
 
-static void __devexit ioc4_serial_exit(void)
+static void __exit ioc4_serial_exit(void)
 {
        ioc4_unregister_submodule(&ioc4_serial_submodule);
        uart_unregister_driver(&ioc4_uart_rs232);

diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 816d4c5..354e9f1 100644 (file)
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -574,11 +574,11 @@ void ioc3_unregister_submodule(struct ioc3_submodule *is)
  * Device management *
  *********************/
 
-static char *
+static char * __devinitdata
 ioc3_class_names[]={"unknown", "IP27 BaseIO", "IP30 system", "MENET 1/2/3",
                        "MENET 4", "CADduo", "Altix Serial"};
 
-static int ioc3_class(struct ioc3_driver_data *idd)
+static int __devinit ioc3_class(struct ioc3_driver_data *idd)
 {
        int res = IOC3_CLASS_NONE;
        /* NIC-based logic */
@@ -601,7 +601,8 @@ static int ioc3_class(struct ioc3_driver_data *idd)
        return res;
 }
 /* Adds a new instance of an IOC3 card */
-static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+static int __devinit
+ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
        struct ioc3_driver_data *idd;
        uint32_t pcmd;
@@ -753,7 +754,7 @@ out:
 }
 
 /* Removes a particular instance of an IOC3 card. */
-static void ioc3_remove(struct pci_dev *pdev)
+static void __devexit ioc3_remove(struct pci_dev *pdev)
 {
        int id;
        struct ioc3_driver_data *idd;
@@ -805,7 +806,7 @@ static struct pci_driver ioc3_driver = {
        .name = "IOC3",
        .id_table = ioc3_id_table,
        .probe = ioc3_probe,
-       .remove = ioc3_remove,
+       .remove = __devexit_p(ioc3_remove),
 };
 
 MODULE_DEVICE_TABLE(pci, ioc3_id_table);
@@ -815,7 +816,7 @@ MODULE_DEVICE_TABLE(pci, ioc3_id_table);
  *********************/
 
 /* Module load */
-static int __devinit ioc3_init(void)
+static int __init ioc3_init(void)
 {
        if (ia64_platform_is("sn2"))
                return pci_register_driver(&ioc3_driver);
@@ -823,7 +824,7 @@ static int __devinit ioc3_init(void)
 }
 
 /* Module unload */
-static void __devexit ioc3_exit(void)
+static void __exit ioc3_exit(void)
 {
        pci_unregister_driver(&ioc3_driver);
 }