e1000e: remove failed request for sw/fw/hw flag

When the driver fails to acquire the control flag used to serialize
NVM and PHY accesses between the driver, firmware and hardware, remove the
request for the flag otherwise the hardware might grant the flag when it
becomes available but the driver will not release the flag.  This could
cause the firmware to prevent the driver getting the flag for all future
attempts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 019b9c0..692251b 100644 (file)
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -398,6 +398,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 
        if (!timeout) {
                hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+               extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+               ew32(EXTCNF_CTRL, extcnf_ctrl);
                return -E1000_ERR_CONFIG;
        }