verbose debugging messages.
config USB_STORAGE_DATAFAB
- bool "Datafab Compact Flash Reader support"
+ tristate "Datafab Compact Flash Reader support"
depends on USB_STORAGE
help
Support for certain Datafab CompactFlash readers.
Datafab has a web page at <http://www.datafabusa.com/>.
+ If this driver is compiled as a module, it will be named ums-datafab.
+
config USB_STORAGE_FREECOM
tristate "Freecom USB/ATAPI Bridge support"
depends on USB_STORAGE
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
endif
obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
+obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o
obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o
obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
ums-cypress-objs := cypress_atacb.o
+ums-datafab-objs := datafab.o
ums-freecom-objs := freecom.o
ums-isd200-objs := isd200.o
ums-sddr09-objs := sddr09.o
*/
#include <linux/errno.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
#include "transport.h"
#include "protocol.h"
#include "debug.h"
-#include "datafab.h"
+
+struct datafab_info {
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
+ signed char lun; /* used for dual-slot readers */
+
+ /* the following aren't used yet */
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
static int datafab_determine_lun(struct us_data *us,
struct datafab_info *info);
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id datafab_usb_ids[] = {
+# include "unusual_datafab.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, datafab_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev datafab_unusual_dev_list[] = {
+# include "unusual_datafab.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
static inline int
datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) {
if (len == 0)
// Transport for the Datafab MDCFE-B
//
-int datafab_transport(struct scsi_cmnd * srb, struct us_data *us)
+static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us)
{
struct datafab_info *info;
int rc;
info->sense_ascq = 0x00;
return USB_STOR_TRANSPORT_FAILED;
}
+
+static int datafab_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - datafab_usb_ids) + datafab_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Datafab Bulk-Only";
+ us->transport = datafab_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver datafab_driver = {
+ .name = "ums-datafab",
+ .probe = datafab_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = datafab_usb_ids,
+ .soft_unbind = 1,
+};
+
+static int __init datafab_init(void)
+{
+ return usb_register(&datafab_driver);
+}
+
+static void __exit datafab_exit(void)
+{
+ usb_deregister(&datafab_driver);
+}
+
+module_init(datafab_init);
+module_exit(datafab_exit);
+++ /dev/null
-/* Driver for Datafab MDCFE-B USB Compact Flash reader
- * Header File
- *
- * Current development and maintenance by:
- * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org)
- *
- * See datafab.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_DATAFAB_MDCFE_B_H
-#define _USB_DATAFAB_MDCFE_B_H
-
-extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct datafab_info {
- unsigned long sectors; // total sector count
- unsigned long ssize; // sector size in bytes
- signed char lun; // used for dual-slot readers
-
- // the following aren't used yet
- unsigned char sense_key;
- unsigned long sense_asc; // additional sense code
- unsigned long sense_ascq; // additional sense code qualifier
-};
-
-#endif
--- /dev/null
+/* Unusual Devices File for the Datafab USB Compact Flash reader
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_DATAFAB) || \
+ defined(CONFIG_USB_STORAGE_DATAFAB_MODULE)
+
+UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
+ "Datafab",
+ "MDCFE-B USB CF Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver. Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
+UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
+ "SIIG/Datafab",
+ "SIIG/Datafab Memory Stick+CF Reader/Writer",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
+UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "MD2/MD3 Disk enclosure",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
+ "Datafab/Unknown",
+ "Datafab-based Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
+ "PNY/Datafab",
+ "PNY/Datafab CF+SM Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
+ "Simple Tech/Datafab",
+ "Simple Tech/Datafab CF+SM Reader",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+/* Submitted by Olaf Hering <olh@suse.de> */
+UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
+ "Datafab Systems, Inc.",
+ "USB to CF + SM Combo (LC1)",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+/* Reported by Felix Moeller <felix@derklecks.de>
+ * in Germany this is sold by Hama with the productnumber 46952
+ * as "DualSlot CompactFlash(TM) & MStick Drive USB"
+ */
+UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
+ "DataFab Systems Inc.",
+ "USB CF+MS",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ 0),
+
+UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
+ "Acomdata",
+ "CF",
+ US_SC_SCSI, US_PR_DATAFAB, NULL,
+ US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
#endif
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
- "Datafab",
- "MDCFE-B USB CF Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-/*
- * The following Datafab-based devices may or may not work
- * using the current driver...the 0xffff is arbitrary since I
- * don't know what device versions exist for these guys.
- *
- * The 0xa003 and 0xa004 devices in particular I'm curious about.
- * I'm told they exist but so far nobody has come forward to say that
- * they work with this driver. Given the success we've had getting
- * other Datafab-based cards operational with this driver, I've decided
- * to leave these two devices in the list.
- */
-UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
- "SIIG/Datafab",
- "SIIG/Datafab Memory Stick+CF Reader/Writer",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
-UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
- "Datafab/Unknown",
- "MD2/MD3 Disk enclosure",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_SINGLE_LUN ),
-
-UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
- "Datafab/Unknown",
- "Datafab-based Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
- "Datafab/Unknown",
- "Datafab-based Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
- "PNY/Datafab",
- "PNY/Datafab CF+SM Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
- "Simple Tech/Datafab",
- "Simple Tech/Datafab CF+SM Reader",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Submitted by Olaf Hering <olh@suse.de> */
-UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
- "Datafab Systems, Inc.",
- "USB to CF + SM Combo (LC1)",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-/* Reported by Felix Moeller <felix@derklecks.de>
- * in Germany this is sold by Hama with the productnumber 46952
- * as "DualSlot CompactFlash(TM) & MStick Drive USB"
- */
-UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
- "DataFab Systems Inc.",
- "USB CF+MS",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- 0 ),
-
-#endif
-
/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
* Only revision 1.13 tested (same for all of the above devices,
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SANE_SENSE ),
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
- "Acomdata",
- "CF",
- US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_SINGLE_LUN ),
-#endif
-
UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999,
"Maxtor",
"USB to SATA",
#include "debug.h"
#include "initializers.h"
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#include "datafab.h"
-#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
us->transport_reset = usb_stor_Bulk_reset;
break;
-#ifdef CONFIG_USB_STORAGE_DATAFAB
- case US_PR_DATAFAB:
- us->transport_name = "Datafab Bulk-Only";
- us->transport = datafab_transport;
- us->transport_reset = usb_stor_Bulk_reset;
- us->max_lun = 1;
- break;
-#endif
-
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
case US_PR_JUMPSHOT:
us->transport_name = "Lexar Jumpshot Control/Bulk";
static struct ignore_entry ignore_ids[] = {
# include "unusual_cypress.h"
+# include "unusual_datafab.h"
# include "unusual_freecom.h"
# include "unusual_isd200.h"
# include "unusual_sddr09.h"
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff