This file details changes in 2.6 which affect PCMCIA card driver authors:
+* New configuration loop helper (as of 2.6.28)
+ By calling pcmcia_loop_config(), a driver can iterate over all available
+ configuration options. During a driver's probe() phase, one doesn't need
+ to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and
+ pcmcia_parse_tuple directly in most if not all cases.
+
* New release helper (as of 2.6.17)
Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
necessary now is calling pcmcia_disable_device. As there is no valid
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
struct ata_host *host;
struct ata_port *ap;
struct ata_pcmcia_info *info;
- tuple_t tuple;
- struct {
- unsigned short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
-
struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
- /* Allocate resoure probing structures */
-
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk)
- goto out1;
-
- cfg = &stk->parse.cftable_entry;
-
- /* Tuples we are walking */
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
is_kme = ((pdev->manf_id == MANFID_KME) &&
((pdev->card_id == PRODID_KME_KXLC005_A) ||
(pdev->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
-/* link->conf.Vcc = stk->conf.Vcc; */
-
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
-
- /* Now munch the resources looking for a suitable set */
- while (1) {
- if (pcmcia_get_tuple_data(pdev, &tuple) != 0)
- goto next_entry;
- if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0)
- goto next_entry;
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
+ /* Allocate resoure probing structures */
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- pdev->conf.ConfigIndex = cfg->index;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort1 + 0x0e;
- } else
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
- } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
- }
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto out1;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
+ }
+ io_base = pdev->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
for (n = 0; n < 0x400; n += 0x40) {
link->io.BasePort1 = n ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ unsigned long try = (unsigned long) priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int bt3c_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
bt3c_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ unsigned long try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (*try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int btuart_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ int try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, btuart_check_config, &try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
- && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int dtl1_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
static int dtl1_config(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
/* Look for a generic full-sized window */
link->io.NumPorts1 = 8;
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len; /*yo */
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
+ if (!pcmcia_loop_config(link, dtl1_confcheck, NULL))
goto failed;
- }
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
/*==== Interface to PCMCIA Layer =======================================*/
+static int cm4000_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int cm4000_config(struct pcmcia_device * link, int devno)
{
struct cm4000_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
- int rc;
/* read the config-tuples */
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) {
-
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- /* Get the IOaddr */
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(link, &link->io);
- if (rc == CS_SUCCESS)
- break; /* we are done */
- }
- if (rc != CS_SUCCESS)
+ if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc =
- pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
- }
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
return;
}
-static int reader_config(struct pcmcia_device *link, int devno)
+static int cm4040_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- struct reader_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
int rc;
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ rc = pcmcia_request_io(p_dev, &p_dev->io);
+ dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+ "pcmcia_request_io returned 0x%x\n", rc);
+ return rc;
+}
+
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
+static int reader_config(struct pcmcia_device *link, int devno)
+{
+ struct reader_dev *dev;
+ int fail_rc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS;
- rc = pcmcia_get_next_tuple(link, &tuple)) {
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
- rc = pcmcia_request_io(link, &link->io);
-
- dev_printk(KERN_INFO, &handle_to_dev(link), "foo");
- if (rc == CS_SUCCESS)
- break;
- else
- dev_printk(KERN_INFO, &handle_to_dev(link),
- "pcmcia_request_io failed 0x%x\n", rc);
- }
- if (rc != CS_SUCCESS)
+
+ if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
- !=CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ fail_rc = pcmcia_request_configuration(link, &link->conf);
+ if (fail_rc != 0) {
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_configuration failed 0x%x\n",
fail_rc);
struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev,
work_reboot);
struct pcmcia_device *link = ipw->link;
- int ret = pccard_reset_card(link->socket);
+ int ret = pcmcia_reset_card(link->socket);
- if (ret != CS_SUCCESS)
+ if (ret != 0)
cs_error(link, ResetCard, ret);
}
{
struct pcmcia_device *link = ipw->link;
int ret;
- config_info_t conf;
tuple_t tuple;
unsigned short buf[64];
cisparse_t parse;
while (ret == 0) {
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit0;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, ParseTuple, ret);
goto exit0;
}
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit0;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
ret = pcmcia_request_io(link, &link->io);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestIO, ret);
goto exit0;
}
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit1;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit1;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, ParseTuple, ret);
goto exit1;
}
ret = pcmcia_request_window(&link, &ipw->request_common_memory,
&ipw->handle_common_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestWindow, ret);
goto exit1;
}
ret = pcmcia_map_mem_page(ipw->handle_common_memory,
&memreq_common_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, MapMemPage, ret);
goto exit1;
}
ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
&ipw->handle_attr_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestWindow, ret);
goto exit2;
}
ret = pcmcia_map_mem_page(ipw->handle_attr_memory,
&memreq_attr_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, MapMemPage, ret);
goto exit2;
}
ret = pcmcia_request_irq(link, &link->irq);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestIRQ, ret);
goto exit3;
}
- /* Look up current Vcc */
-
- ret = pcmcia_get_configuration_info(link, &conf);
-
- if (ret != CS_SUCCESS) {
- cs_error(link, GetConfigurationInfo, ret);
- goto exit4;
- }
-
printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
ipw->is_v2_card ? "V2/V3" : "V1");
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
*/
ret = pcmcia_request_configuration(link, &link->conf);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestConfiguration, ret);
goto exit4;
}
cfg = &(parse.cftable_entry);
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
if (cfg->index == 0)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->conf.ConfigIndex = cfg->index;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ide_config(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- tuple_t tuple;
- struct {
- u_short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
struct ide_host *host;
DEBUG(0, "ide_config(0x%p)\n", link);
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk) goto err_mem;
- cfg = &stk->parse.cftable_entry;
-
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
-
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry;
- if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry;
-
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- link->io.NumPorts1 = 8;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- link->io.NumPorts1 = io->win[0].len;
- link->io.NumPorts2 = 0;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort1 + 0x0e;
- } else goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- } else if (pcmcia_get_next_tuple(link, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto err_mem;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
+
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
}
+ io_base = link->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int avmcs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ if (cf->io.nwin <= 0)
+ return -ENODEV;
+
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len;
+ p_dev->io.NumPorts2 = 0;
+ printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
+ p_dev->io.BasePort1,
+ p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
+ return pcmcia_request_io(p_dev, &p_dev->io);
}
static int avmcs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
- u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
dev = link->priv;
- do {
- devname[0] = 0;
- if (link->prod_id[1])
- strlcpy(devname, link->prod_id[1], sizeof(devname));
+ devname[0] = 0;
+ if (link->prod_id[1])
+ strlcpy(devname, link->prod_id[1], sizeof(devname));
- /*
- * find IO port
- */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if (cf->io.nwin > 0) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len;
- link->io.NumPorts2 = 0;
- printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
- link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) goto found_port;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
-found_port:
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- break;
- }
+ /*
+ * find IO port
+ */
+ if (pcmcia_loop_config(link, avmcs_configcheck, NULL))
+ return -ENODEV;
+ do {
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int avma1cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ if (cf->io.nwin <= 0)
+ return -ENODEV;
+
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len;
+ p_dev->io.NumPorts2 = 0;
+ printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
+ p_dev->io.BasePort1,
+ p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
+ return pcmcia_request_io(p_dev, &p_dev->io);
}
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
static int avma1cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
- u_char buf[64];
char devname[128];
IsdnCard_t icard;
int busy = 0;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
- do {
- devname[0] = 0;
- if (link->prod_id[1])
- strlcpy(devname, link->prod_id[1], sizeof(devname));
+ devname[0] = 0;
+ if (link->prod_id[1])
+ strlcpy(devname, link->prod_id[1], sizeof(devname));
- /*
- * find IO port
- */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if (cf->io.nwin > 0) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len;
- link->io.NumPorts2 = 0;
- printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
- link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1 - 1);
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) goto found_port;
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (pcmcia_loop_config(link, avma1cs_configcheck, NULL))
+ return -ENODEV;
-found_port:
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- break;
- }
-
+ do {
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
device available to the system.
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ int j;
+
+ if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+ printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ } else {
+ printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
+ for (j = 0x2f0; j > 0x100; j -= 0x10) {
+ p_dev->io.BasePort1 = j;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int elsa_cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
- int i, j, last_fn;
- u_short buf[128];
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_fn;
IsdnCard_t icard;
DEBUG(0, "elsa_config(0x%p)\n", link);
dev = link->priv;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
- printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- } else {
- printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
- link->conf.ConfigIndex = cf->index;
- for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
- link->io.BasePort1 = j;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
+ i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
+ if (i != 0) {
last_fn = RequestIO;
goto cs_failed;
}
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
last_fn = RequestConfiguration;
goto cs_failed;
}
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-static int sedlbauer_config(struct pcmcia_device *link)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int last_fn, last_ret;
- u8 buf[64];
- config_info_t conf;
- win_req_t req;
- memreq_t map;
- IsdnCard_t icard;
-
- DEBUG(0, "sedlbauer_config(0x%p)\n", link);
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
+ win_req_t *req = priv_data;
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
+ if (cfg->index == 0)
+ return -ENODEV;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
}
-
+
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
- goto next_entry;
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
}
-
+
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
/* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-/* new in dummy.cs 2001/01/28 MN
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-*/
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
}
/*
needs to be mapped to virtual space with ioremap() before it
is used.
*/
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Attributes |= WIN_ENABLE;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
-/* new in dummy.cs 2001/01/28 MN
- if (req.Size < 0x1000)
- req.Size = 0x1000;
-*/
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ memreq_t map;
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Attributes |= WIN_ENABLE;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ return -ENODEV;
+ map.Page = 0;
+ map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ return -ENODEV;
}
- /* If we got this far, we're cool! */
- break;
+ return 0;
+}
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+
+
+static int sedlbauer_config(struct pcmcia_device *link)
+{
+ local_info_t *dev = link->priv;
+ win_req_t *req;
+ int last_fn, last_ret;
+ IsdnCard_t icard;
+
+ DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ /*
+ In this loop, we scan the CIS for configuration table entries,
+ each of which describes a valid card configuration, including
+ voltage, IO window, memory window, and interrupt settings.
+
+ We make no assumptions about the card to be configured: we use
+ just the information available in the CIS. In an ideal world,
+ this would work for any PCMCIA card, but it requires a complete
+ and accurate CIS. In practice, a driver usually "knows" most of
+ these things without consulting the CIS, and most client drivers
+ will only use the CIS to fill in implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+ if (last_ret)
+ goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
sedlbauer_release(link);
return -ENODEV;
device available to the system.
======================================================================*/
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
-{
- int i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
-}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
- cisparse_t *parse)
+static int teles_cs_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS) return i;
- return get_tuple(handle, tuple, parse);
+ int j;
+
+ if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+ printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ } else {
+ printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
+ for (j = 0x2f0; j > 0x100; j -= 0x10) {
+ p_dev->io.BasePort1 = j;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int teles_cs_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
- int i, j, last_fn;
- u_short buf[128];
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_fn;
IsdnCard_t icard;
DEBUG(0, "teles_config(0x%p)\n", link);
dev = link->priv;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- i = first_tuple(link, &tuple, &parse);
- while (i == CS_SUCCESS) {
- if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
- printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- } else {
- printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
- link->conf.ConfigIndex = cf->index;
- for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
- link->io.BasePort1 = j;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
+ i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
+ if (i != 0) {
last_fn = RequestIO;
goto cs_failed;
}
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
last_fn = RequestConfiguration;
goto cs_failed;
}
DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
dev->offset, mrq.CardOffset);
mrq.Page = 0;
- if( (ret = pcmcia_map_mem_page(win, &mrq)) != CS_SUCCESS) {
+ ret = pcmcia_map_mem_page(win, &mrq);
+ if (ret != 0) {
cs_error(dev->p_dev, MapMemPage, ret);
return NULL;
}
DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
ret = pcmcia_modify_configuration(link, &mod);
- if(ret != CS_SUCCESS) {
+ if (ret != 0)
cs_error(link, ModifyConfiguration, ret);
- }
}
tuple.DesiredTuple = RETURN_FIRST_TUPLE;
rc = pcmcia_get_first_tuple(link, &tuple);
- while(rc == CS_SUCCESS) {
+ while (rc == 0) {
rc = pcmcia_get_tuple_data(link, &tuple);
- if(rc != CS_SUCCESS) {
+ if (rc != 0) {
cs_error(link, GetTupleData, rc);
break;
}
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if(rc != CS_SUCCESS) {
+ rc = pcmcia_parse_tuple(&tuple, &parse);
+ if (rc != 0) {
cs_error(link, ParseTuple, rc);
break;
}
int last_ret = 0, last_fn = 0;
int ret;
int i;
- config_info_t t;
static char *probes[] = { "jedec_probe", "cfi_probe" };
int new_name = 0;
DEBUG(3, "link=0x%p", link);
- DEBUG(2, "Validating CIS");
- ret = pcmcia_validate_cis(link, NULL);
- if(ret != CS_SUCCESS) {
- cs_error(link, GetTupleData, ret);
- }
-
card_settings(dev, link, &new_name);
dev->pcmcia_map.phys = NO_XIP;
dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
- DEBUG(2, "Getting configuration");
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &t));
- DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
- dev->vpp = (vpp) ? vpp : t.Vpp1;
+ dev->vpp = (vpp) ? vpp : link->socket.socket.Vpp;
link->conf.Attributes = 0;
if(setvpp == 2) {
link->conf.Vpp = dev->vpp;
}
link->conf.IntType = INT_MEMORY;
- link->conf.ConfigBase = t.ConfigBase;
- link->conf.Status = t.Status;
- link->conf.Pin = t.Pin;
- link->conf.Copy = t.Copy;
- link->conf.ExtStatus = t.ExtStatus;
link->conf.ConfigIndex = 0;
- link->conf.Present = t.Present;
DEBUG(2, "Setting Configuration");
ret = pcmcia_request_configuration(link, &link->conf);
- if(ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestConfiguration, ret);
if (dev->win_base) {
iounmap(dev->win_base);
for (i = j = 0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
if (multi && (j & 0x80)) continue;
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
/* The 3c589 has an extra EEPROM for configuration info, including
the hardware address. The 3c562 puts the address in the CIS. */
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes =
+ link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
}
} else {
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
}
}
+static int axnet_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -ENODEV;
+
+ p_dev->conf.ConfigIndex = 0x05;
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return -ENODEV;
+}
+
static int axnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
axnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
int i, j, last_ret, last_fn;
- u_short buf[64];
DECLARE_MAC_BUF(mac);
DEBUG(0, "axnet_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = 0x05;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
+ if (last_ret != 0) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
DEBUG(0, "com20020_config(0x%p)\n", link);
DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
- i = !CS_SUCCESS;
+ i = -ENODEV;
if (!link->io.BasePort1)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
link->io.BasePort1 = ioaddr;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
}
else
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIO failed totally!\n");
goto failed;
link->irq.AssignedIRQ,
link->irq.IRQInfo1, link->irq.IRQInfo2);
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIRQ failed totally!\n");
goto failed;
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
}
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
link->io.BasePort1 = ioaddr;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) {
+ if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_FUNCE;
tuple.TupleOffset = 0;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
link->conf.ConfigIndex = parse.cftable_entry.index;
switch (link->manf_id) {
case MANFID_TDK:
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
ret = mfc_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else {
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
}
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i != 0x200) ? 0 : -1;
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return 0;
/* Try PRIMARY card at 0xA20-0xA23 */
link->io.BasePort1 = 0xA20;
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
link->io.BasePort1 = 0xA24;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name);
#if RESET_ON_TIMEOUT
printk("resetting card\n");
- pcmcia_reset_card(link, NULL);
+ pcmcia_reset_card(link->socket);
#else /* #if RESET_ON_TIMEOUT */
printk("NOT resetting card\n");
#endif /* #if RESET_ON_TIMEOUT */
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return NULL;
}
iounmap(virt);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i < NR_INFO) ? hw_info+i : NULL;
} /* get_hwinfo */
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
}
}
+static int pcnet_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *has_shmem = priv_data;
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -EINVAL;
+
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+
+ *has_shmem = ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000));
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return 0;
+}
+
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
+ int last_ret, last_fn, start_pg, stop_pg, cm_offset;
int has_shmem = 0;
- u_short buf[64];
hw_info_t *local_hw_info;
DECLARE_MAC_BUF(mac);
DEBUG(0, "pcnet_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+ if (last_ret) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
{
int i;
- if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ i = pcmcia_get_first_tuple(handle, tuple);
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != 0)
+ return i;
+ return pcmcia_parse_tuple(tuple, parse);
}
static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
{
int i;
- if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
+ (i = pcmcia_get_tuple_data(handle, tuple)) != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ return pcmcia_parse_tuple(tuple, parse);
}
/*======================================================================
return 0;
}
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int k;
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ for (k = 0; k < 0x400; k += 0x10) {
+ if (k & 0x80)
+ continue;
+ p_dev->io.BasePort1 = k ^ 0x300;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int mhz_mfc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
win_req_t req;
memreq_t mem;
- int i, k;
+ int i;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+ return -ENOMEM;
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
- i = first_tuple(link, tuple, parse);
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
- while (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort2 = cf->io.win[0].base;
- for (k = 0; k < 0x400; k += 0x10) {
- if (k & 0x80) continue;
- link->io.BasePort1 = k ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- if (i == CS_SUCCESS) break;
- i = next_tuple(link, tuple, parse);
- }
- if (i != CS_SUCCESS)
+ if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
goto free_cfg_mem;
dev->base_addr = link->io.BasePort1;
req.Base = req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS)
+ if (i != 0)
goto free_cfg_mem;
smc->base = ioremap(req.Base, req.Size);
mem.CardOffset = mem.Page = 0;
mem.CardOffset = link->conf.ConfigBase;
i = pcmcia_map_mem_page(link->win, &mem);
- if ((i == CS_SUCCESS)
+ if ((i == 0)
&& (smc->manfid == MANFID_MEGAHERTZ)
&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
mhz_3288_power(link);
free_cfg_mem:
kfree(cfg_mem);
- return i;
+ return -ENODEV;
}
static int mhz_setup(struct pcmcia_device *link)
/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
tuple->DesiredTuple = CISTPL_VERS_1;
- if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+ if (first_tuple(link, tuple, parse) != 0) {
rc = -1;
goto free_cfg_mem;
}
/* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
- if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+ if (next_tuple(link, tuple, parse) != 0)
first_tuple(link, tuple, parse);
if (parse->version_1.ns > 3) {
station_addr = parse->version_1.str + parse->version_1.ofs[3];
/* Another possibility: for the EM3288, in a special tuple */
tuple->DesiredTuple = 0x81;
- if (pcmcia_get_first_tuple(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
- if (pcmcia_get_tuple_data(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_tuple_data(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
/*====================================================================*/
+static int smc_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int smc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
int i;
- cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
link->io.NumPorts1 = 16;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- i = next_tuple(link, tuple, parse);
- }
- if (i == CS_SUCCESS)
- dev->base_addr = link->io.BasePort1;
+ i = pcmcia_loop_config(link, smc_configcheck, NULL);
+ if (!i)
+ dev->base_addr = link->io.BasePort1;
- kfree(cfg_mem);
return i;
}
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
+ return -ENOMEM;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
/* Check for a LAN function extension tuple */
tuple->DesiredTuple = CISTPL_FUNCE;
i = first_tuple(link, tuple, parse);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
break;
i = next_tuple(link, tuple, parse);
}
- if (i == CS_SUCCESS) {
+ if (i == 0) {
node_id = (cistpl_lan_node_id_t *)parse->funce.data;
if (node_id->nb == 6) {
for (i = 0; i < 6; i++)
for (i = j = 0; j < 4; j++) {
link->io.BasePort2 = com[j];
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
link->io.NumPorts2 = 0;
/* Read the station address from tuple 0x90, subtuple 0x04 */
tuple->DesiredTuple = 0x90;
i = pcmcia_get_first_tuple(link, tuple);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
i = pcmcia_get_tuple_data(link, tuple);
- if ((i != CS_SUCCESS) || (buf[0] == 0x04))
+ if ((i != 0) || (buf[0] == 0x04))
break;
i = pcmcia_get_next_tuple(link, tuple);
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
rc = -1;
goto free_cfg_mem;
}
======================================================================*/
-#define CS_EXIT_TEST(ret, svc, label) \
-if (ret != CS_SUCCESS) { cs_error(link, svc, ret); goto label; }
+#define CS_EXIT_TEST(ret, svc, label) \
+if (ret != 0) { \
+ cs_error(link, svc, ret); \
+ goto label; \
+}
static int smc91c92_config(struct pcmcia_device *link)
{
if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
- err = pcmcia_parse_tuple(handle, tuple, parse);
+ err = pcmcia_parse_tuple(tuple, parse);
return err;
}
if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
- err = pcmcia_parse_tuple(handle, tuple, parse);
+ err = pcmcia_parse_tuple(tuple, parse);
return err;
}
return 0;
}
+static int
+xirc2ps_config_modem(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ unsigned int ioaddr;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = ioaddr;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int
+xirc2ps_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *pass = priv_data;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = p_dev->io.BasePort2
+ + (*pass ? (cf->index & 0x20 ? -24:8)
+ : (cf->index & 0x20 ? 8:-24));
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+
+}
+
/****************
* xirc2ps_config() is scheduled to run after a CARD_INSERTION event
* is received, to configure the PCMCIA socket, and to make the
{
struct net_device *dev = link->priv;
local_info_t *local = netdev_priv(dev);
+ unsigned int ioaddr;
tuple_t tuple;
cisparse_t parse;
- unsigned int ioaddr;
int err, i;
u_char buf[64];
cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
DECLARE_MAC_BUF(mac);
local->dingo_ccr = NULL;
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
link->io.NumPorts1 = 16; /* no Mako stuff anymore */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)) {
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
- goto port_found;
- }
- }
- }
+ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
+ goto port_found;
} else {
link->io.NumPorts1 = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* mirrored every 32 bytes. Actually we use a mirrored port for
* the Mako if (on the first pass) the COR bit 5 is set.
*/
- for (pass=0; pass < 2; pass++) {
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)){
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = link->io.BasePort2
- + (pass ? (cf->index & 0x20 ? -24:8)
- : (cf->index & 0x20 ? 8:-24));
- if (!(err=pcmcia_request_io(link, &link->io)))
+ for (pass=0; pass < 2; pass++)
+ if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
goto port_found;
- }
- }
- }
/* if special option:
* try to configure as Ethernet only.
* .... */
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int airo_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ win_req_t *req = priv_data;
+
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
+
+ /*
+ Now set up a common memory window, if needed. There is room
+ in the struct pcmcia_device structure for one memory window handle,
+ but if the base addresses need to be saved, or if multiple
+ windows are needed, the info should go in the private data
+ structure for this device.
+
+ Note that the memory window base is a physical address, and
+ needs to be mapped to virtual space with ioremap() before it
+ is used.
+ */
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ memreq_t map;
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ return -ENODEV;
+ map.Page = 0;
+ map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ return -ENODEV;
+ }
+ /* If we got this far, we're cool! */
+ return 0;
+}
+
+
static int airo_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
+ win_req_t *req;
int last_fn, last_ret;
- u_char buf[64];
- win_req_t req;
- memreq_t map;
dev = link->priv;
DEBUG(0, "airo_config(0x%p)\n", link);
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ /*
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (last_ret)
+ goto failed;
+
/*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
+ Allocate an interrupt line. Note that this does not assign a
+ handler to the interrupt, unless the 'Handler' member of the
+ irq structure is initialized.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
- }
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
-
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
+ kfree(req);
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
airo_release(link);
+ kfree(req);
return -ENODEV;
} /* airo_config */
return 0;
}
+static int atmel_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int atmel_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
int last_fn, last_ret;
- u_char buf[64];
struct pcmcia_device_id *did;
dev = link->priv;
DEBUG(0, "atmel_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+ if (pcmcia_loop_config(link, atmel_config_check, NULL))
+ goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
atmel_release(link);
return -ENODEV;
}
tuple.TupleOffset = 0;
res = pcmcia_get_first_tuple(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
res = pcmcia_get_tuple_data(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
- res = pcmcia_parse_tuple(dev, &tuple, &parse);
- if (res != CS_SUCCESS)
+ res = pcmcia_parse_tuple(&tuple, &parse);
+ if (res != 0)
goto err_kfree_ssb;
dev->conf.ConfigBase = parse.config.base;
win.Size = SSB_CORE_SIZE;
win.AccessSpeed = 250;
res = pcmcia_request_window(&dev, &win, &dev->win);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
mem.CardOffset = 0;
mem.Page = 0;
res = pcmcia_map_mem_page(dev->win, &mem);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
- pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
+ pcmcia_parse_tuple(&tuple, parse) ||
parse->longlink_mfc.nfn < 2) {
/* No multi-function links found */
ret = -ENODEV;
reg.Value = COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
reg.Value |= COR_IREQ_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
reg.Offset = CISREG_CCSR;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
reg.Value = old_cor & ~COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
- cs_error(link, fn, _ret); \
- goto next_entry; \
-} \
-} while (0)
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+ "(default 0x%02X)\n", cfg->index, dflt->index);
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
+ " this entry\n");
+ return -ENODEV;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
+ "- skipping this entry\n");
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+ /* At least Compaq WL200 does not have IRQInfo1 set,
+ * but it does not work without interrupts.. */
+ printk(KERN_WARNING "Config has no IRQ info, but trying to "
+ "enable IRQ anyway..\n");
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ }
+
+ /* IO window settings */
+ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+ "io.base=0x%04x, len=%d\n", io->flags,
+ io->win[0].base, io->win[0].len);
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags &
+ CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- tuple_t tuple;
- cisparse_t *parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
- if (parse == NULL || hw_priv == NULL) {
+ if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/* Look for an appropriate configuration table entry in the CIS */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- for (;;) {
- cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
- CFG_CHECK2(GetTupleData,
- pcmcia_get_tuple_data(link, &tuple));
- CFG_CHECK2(ParseTuple,
- pcmcia_parse_tuple(link, &tuple, parse));
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
- PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, dflt.index);
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk("Config has no IRQ info, but trying to enable "
- "IRQ anyway..\n");
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "dflt.io.nwin=%d\n",
- cfg->io.nwin, dflt.io.nwin);
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- CFG_CHECK2(RequestIO,
- pcmcia_request_io(link, &link->io));
-
- /* This configuration table entry is OK */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple,
- pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
- kfree(parse);
return ret;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
- kfree(parse);
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
(ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
- (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+ (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
{
lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
goto out1;
for (i = j = 0x0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
/* We need atomic ops here, because we're not holding the lock */
set_bit(0, &card->hard_reset_in_progress);
- err = pcmcia_reset_card(link, NULL);
+ err = pcmcia_reset_card(link->socket);
if (err)
return err;
last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
} while (0)
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
orinoco_cs_config(struct pcmcia_device *link)
{
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
-
return 0;
cs_failed:
iounmap(local->amem);
/* Do bother checking to see if these succeed or not */
i = pcmcia_release_window(local->amem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
i = pcmcia_release_window(local->rmem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
pcmcia_disable_device(link);
DEBUG(2,"ray_release ending\n");
* device available to the system.
*/
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
spectrum_cs_config(struct pcmcia_device *link)
{
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
#endif
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
reg.Action = CS_WRITE;
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
do
{
i = pcmcia_request_io(link, &link->io);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIO, i);
break;
* actually assign a handler to the interrupt.
*/
i = pcmcia_request_irq(link, &link->irq);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIRQ, i);
break;
*/
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestConfiguration, i);
break;
req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestWindow, i);
break;
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, MapMemPage, i);
break;
link->io.BasePort1 = j;
link->io.BasePort2 = link->io.BasePort1 + 0x10;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int parport_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ if (epp_mode)
+ p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int parport_config(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_cftable_entry_t dflt = { 0 };
struct parport *p;
int last_ret, last_fn;
-
+
DEBUG(0, "parport_config(0x%p)\n", link);
-
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- if (epp_mode)
- link->conf.ConfigIndex |= FORCE_EPP_MODE;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+
+ last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
-
+
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
# Makefile for the kernel pcmcia subsystem (c/o David Hinds)
#
-ifeq ($(CONFIG_PCMCIA_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-
pcmcia_core-y += cs.o cistpl.o rsrc_mgr.o socket_sysfs.o
pcmcia_core-$(CONFIG_CARDBUS) += cardbus.o
obj-$(CONFIG_PCCARD) += pcmcia_core.o
skt->spd_io[map->map] = speed;
}
- map->start=(ioaddr_t)(u32)skt->virt_io;
+ map->start=(unsigned int)(u32)skt->virt_io;
map->stop=map->start+MAP_SIZE;
return 0;
struct resource res_attr;
void * virt_io;
- ioaddr_t phys_io;
+ unsigned int phys_io;
unsigned int phys_attr;
unsigned int phys_mem;
unsigned short speed_io, speed_attr, speed_mem;
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/bus_ops.h>
-#include "cs_internal.h"
#include <asm/io.h>
#include <asm/irq.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/bus_ops.h>
-#include "cs_internal.h"
#include <asm/io.h>
#include <asm/irq.h>
pci_bus_add_devices(bus);
s->irq.AssignedIRQ = s->pci_irq;
- return CS_SUCCESS;
+ return 0;
}
void cb_free(struct pcmcia_socket * s)
if (!(s->features & SS_CAP_STATIC_MAP) && (mem->res == NULL)) {
mem->res = pcmcia_find_mem_region(0, s->map_size, s->map_size, 0, s);
if (mem->res == NULL) {
- printk(KERN_NOTICE "cs: unable to map card memory!\n");
+ dev_printk(KERN_NOTICE, &s->dev,
+ "cs: unable to map card memory!\n");
return NULL;
}
s->cis_virt = NULL;
======================================================================*/
static void read_cis_cache(struct pcmcia_socket *s, int attr, u_int addr,
- u_int len, void *ptr)
+ size_t len, void *ptr)
{
struct cis_cache_entry *cis;
int ret;
if (s->fake_cis) {
- if (s->fake_cis_len > addr+len)
+ if (s->fake_cis_len >= addr+len)
memcpy(ptr, s->fake_cis+addr, len);
else
memset(ptr, 0xff, len);
buf = kmalloc(256, GFP_KERNEL);
if (buf == NULL)
- return -1;
+ dev_printk(KERN_WARNING, &s->dev,
+ "no memory for verifying CIS\n");
+ return -ENOMEM;
list_for_each_entry(cis, &s->cis_cache, node) {
int len = cis->len;
======================================================================*/
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis)
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len)
{
- kfree(s->fake_cis);
- s->fake_cis = NULL;
- if (cis->Length > CISTPL_MAX_CIS_SIZE)
- return CS_BAD_SIZE;
- s->fake_cis = kmalloc(cis->Length, GFP_KERNEL);
- if (s->fake_cis == NULL)
- return CS_OUT_OF_RESOURCE;
- s->fake_cis_len = cis->Length;
- memcpy(s->fake_cis, cis->Data, cis->Length);
- return CS_SUCCESS;
+ if (len > CISTPL_MAX_CIS_SIZE) {
+ dev_printk(KERN_WARNING, &s->dev, "replacement CIS too big\n");
+ return -EINVAL;
+ }
+ kfree(s->fake_cis);
+ s->fake_cis = kmalloc(len, GFP_KERNEL);
+ if (s->fake_cis == NULL) {
+ dev_printk(KERN_WARNING, &s->dev, "no memory to replace CIS\n");
+ return -ENOMEM;
+ }
+ s->fake_cis_len = len;
+ memcpy(s->fake_cis, data, len);
+ return 0;
}
EXPORT_SYMBOL(pcmcia_replace_cis);
int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple_t *tuple)
{
if (!s)
- return CS_BAD_HANDLE;
+ return -EINVAL;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
tuple->TupleLink = tuple->Flags = 0;
#ifdef CONFIG_CARDBUS
if (s->state & SOCKET_CARDBUS) {
!(tuple->Attributes & TUPLE_RETURN_COMMON)) {
cisdata_t req = tuple->DesiredTuple;
tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
- if (pccard_get_next_tuple(s, function, tuple) == CS_SUCCESS) {
+ if (pccard_get_next_tuple(s, function, tuple) == 0) {
tuple->DesiredTuple = CISTPL_LINKTARGET;
- if (pccard_get_next_tuple(s, function, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
+ if (pccard_get_next_tuple(s, function, tuple) != 0)
+ return -ENOSPC;
} else
tuple->CISOffset = tuple->TupleLink = 0;
tuple->DesiredTuple = req;
int ofs, i, attr;
if (!s)
- return CS_BAD_HANDLE;
+ return -EINVAL;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
link[1] = tuple->TupleLink;
ofs = tuple->CISOffset + tuple->TupleLink;
/* End of chain? Follow long link if possible */
if (link[0] == CISTPL_END) {
if ((ofs = follow_link(s, tuple)) < 0)
- return CS_NO_MORE_ITEMS;
+ return -ENOSPC;
attr = SPACE(tuple->Flags);
read_cis_cache(s, attr, ofs, 2, link);
}
}
if (i == MAX_TUPLES) {
cs_dbg(s, 1, "cs: overrun in pcmcia_get_next_tuple\n");
- return CS_NO_MORE_ITEMS;
+ return -ENOSPC;
}
tuple->TupleCode = link[0];
tuple->TupleLink = link[1];
tuple->CISOffset = ofs + 2;
- return CS_SUCCESS;
+ return 0;
}
EXPORT_SYMBOL(pccard_get_next_tuple);
u_int len;
if (!s)
- return CS_BAD_HANDLE;
+ return -EINVAL;
if (tuple->TupleLink < tuple->TupleOffset)
- return CS_NO_MORE_ITEMS;
+ return -ENOSPC;
len = tuple->TupleLink - tuple->TupleOffset;
tuple->TupleDataLen = tuple->TupleLink;
if (len == 0)
- return CS_SUCCESS;
+ return 0;
read_cis_cache(s, SPACE(tuple->Flags),
tuple->CISOffset + tuple->TupleOffset,
_MIN(len, tuple->TupleDataMax), tuple->TupleData);
- return CS_SUCCESS;
+ return 0;
}
EXPORT_SYMBOL(pccard_get_tuple_data);
case 3: device->dev[i].speed = 150; break;
case 4: device->dev[i].speed = 100; break;
case 7:
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
device->dev[i].speed = SPEED_CVT(*p);
while (*p & 0x80)
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
break;
default:
- return CS_BAD_TUPLE;
+ return -EINVAL;
}
- if (++p == q) return CS_BAD_TUPLE;
- if (*p == 0xff) break;
+ if (++p == q)
+ return -EINVAL;
+ if (*p == 0xff)
+ break;
scale = *p & 7;
- if (scale == 7) return CS_BAD_TUPLE;
+ if (scale == 7)
+ return -EINVAL;
device->dev[i].size = ((*p >> 3) + 1) * (512 << (scale*2));
device->ndev++;
- if (++p == q) break;
+ if (++p == q)
+ break;
}
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
{
u_char *p;
if (tuple->TupleDataLen < 5)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = (u_char *) tuple->TupleData;
csum->addr = tuple->CISOffset + get_unaligned_le16(p) - 2;
csum->len = get_unaligned_le16(p + 2);
csum->sum = *(p + 4);
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
static int parse_longlink(tuple_t *tuple, cistpl_longlink_t *link)
{
if (tuple->TupleDataLen < 4)
- return CS_BAD_TUPLE;
+ return -EINVAL;
link->addr = get_unaligned_le32(tuple->TupleData);
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
link->nfn = *p; p++;
if (tuple->TupleDataLen <= link->nfn*5)
- return CS_BAD_TUPLE;
+ return -EINVAL;
for (i = 0; i < link->nfn; i++) {
link->fn[i].space = *p; p++;
link->fn[i].addr = get_unaligned_le32(p);
p += 4;
}
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
{
int i, j, ns;
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
ns = 0; j = 0;
for (i = 0; i < max; i++) {
- if (*p == 0xff) break;
+ if (*p == 0xff)
+ break;
ofs[i] = j;
ns++;
for (;;) {
s[j++] = (*p == 0xff) ? '\0' : *p;
if ((*p == '\0') || (*p == 0xff)) break;
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
}
if ((*p == 0xff) || (++p == q)) break;
}
if (found) {
*found = ns;
- return CS_SUCCESS;
+ return 0;
} else {
- return (ns == max) ? CS_SUCCESS : CS_BAD_TUPLE;
+ return (ns == max) ? 0 : -EINVAL;
}
}
vers_1->major = *p; p++;
vers_1->minor = *p; p++;
- if (p >= q) return CS_BAD_TUPLE;
+ if (p >= q)
+ return -EINVAL;
return parse_strings(p, q, CISTPL_VERS_1_MAX_PROD_STRINGS,
vers_1->str, vers_1->ofs, &vers_1->ns);
p += 2;
}
jedec->nid = nid;
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
static int parse_manfid(tuple_t *tuple, cistpl_manfid_t *m)
{
if (tuple->TupleDataLen < 4)
- return CS_BAD_TUPLE;
+ return -EINVAL;
m->manf = get_unaligned_le16(tuple->TupleData);
m->card = get_unaligned_le16(tuple->TupleData + 2);
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
{
u_char *p;
if (tuple->TupleDataLen < 2)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = (u_char *)tuple->TupleData;
f->func = p[0];
f->sysinit = p[1];
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
u_char *p;
int i;
if (tuple->TupleDataLen < 1)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = (u_char *)tuple->TupleData;
f->type = p[0];
for (i = 1; i < tuple->TupleDataLen; i++)
f->data[i-1] = p[i];
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
rasz = *p & 0x03;
rmsz = (*p & 0x3c) >> 2;
if (tuple->TupleDataLen < rasz+rmsz+4)
- return CS_BAD_TUPLE;
+ return -EINVAL;
config->last_idx = *(++p);
p++;
config->base = 0;
for (i = 0; i <= rmsz; i++)
config->rmask[i>>2] += p[i] << (8*(i%4));
config->subtuples = tuple->TupleDataLen - (rasz+rmsz+4);
- return CS_SUCCESS;
+ return 0;
}
/*======================================================================
static u_char *parse_irq(u_char *p, u_char *q, cistpl_irq_t *irq)
{
- if (p == q) return NULL;
+ if (p == q)
+ return NULL;
irq->IRQInfo1 = *p; p++;
if (irq->IRQInfo1 & IRQ_INFO2_VALID) {
- if (p+2 > q) return NULL;
+ if (p+2 > q)
+ return NULL;
irq->IRQInfo2 = (p[1]<<8) + p[0];
p += 2;
}
if (*p & 0x40)
entry->flags |= CISTPL_CFTABLE_DEFAULT;
if (*p & 0x80) {
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
if (*p & 0x10)
entry->flags |= CISTPL_CFTABLE_BVDS;
if (*p & 0x20)
entry->interface = 0;
/* Process optional features */
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
features = *p; p++;
/* Power options */
if ((features & 3) > 0) {
p = parse_power(p, q, &entry->vcc);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vcc.present = 0;
if ((features & 3) > 1) {
p = parse_power(p, q, &entry->vpp1);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vpp1.present = 0;
if ((features & 3) > 2) {
p = parse_power(p, q, &entry->vpp2);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vpp2.present = 0;
/* Timing options */
if (features & 0x04) {
p = parse_timing(p, q, &entry->timing);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else {
entry->timing.wait = 0;
entry->timing.ready = 0;
/* I/O window options */
if (features & 0x08) {
p = parse_io(p, q, &entry->io);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->io.nwin = 0;
/* Interrupt options */
if (features & 0x10) {
p = parse_irq(p, q, &entry->irq);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->irq.IRQInfo1 = 0;
entry->mem.win[0].card_addr = 0;
entry->mem.win[0].host_addr = 0;
p += 2;
- if (p > q) return CS_BAD_TUPLE;
+ if (p > q)
+ return -EINVAL;
break;
case 0x40:
entry->mem.nwin = 1;
entry->mem.win[0].card_addr = get_unaligned_le16(p + 2) << 8;
entry->mem.win[0].host_addr = 0;
p += 4;
- if (p > q) return CS_BAD_TUPLE;
+ if (p > q)
+ return -EINVAL;
break;
case 0x60:
p = parse_mem(p, q, &entry->mem);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
break;
}
/* Misc features */
if (features & 0x80) {
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
entry->flags |= (*p << 8);
while (*p & 0x80)
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
p++;
}
entry->subtuples = q-p;
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
{
u_char *p;
if (tuple->TupleDataLen < 6)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = (u_char *)tuple->TupleData;
bar->attr = *p;
p += 2;
bar->size = get_unaligned_le32(p);
- return CS_SUCCESS;
+ return 0;
}
static int parse_config_cb(tuple_t *tuple, cistpl_config_t *config)
p = (u_char *)tuple->TupleData;
if ((*p != 3) || (tuple->TupleDataLen < 6))
- return CS_BAD_TUPLE;
+ return -EINVAL;
config->last_idx = *(++p);
p++;
config->base = get_unaligned_le32(p);
config->subtuples = tuple->TupleDataLen - 6;
- return CS_SUCCESS;
+ return 0;
}
static int parse_cftable_entry_cb(tuple_t *tuple,
entry->flags |= CISTPL_CFTABLE_DEFAULT;
/* Process optional features */
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
features = *p; p++;
/* Power options */
if ((features & 3) > 0) {
p = parse_power(p, q, &entry->vcc);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vcc.present = 0;
if ((features & 3) > 1) {
p = parse_power(p, q, &entry->vpp1);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vpp1.present = 0;
if ((features & 3) > 2) {
p = parse_power(p, q, &entry->vpp2);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->vpp2.present = 0;
/* I/O window options */
if (features & 0x08) {
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
entry->io = *p; p++;
} else
entry->io = 0;
/* Interrupt options */
if (features & 0x10) {
p = parse_irq(p, q, &entry->irq);
- if (p == NULL) return CS_BAD_TUPLE;
+ if (p == NULL)
+ return -EINVAL;
} else
entry->irq.IRQInfo1 = 0;
if (features & 0x20) {
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
entry->mem = *p; p++;
} else
entry->mem = 0;
/* Misc features */
if (features & 0x80) {
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
entry->flags |= (*p << 8);
if (*p & 0x80) {
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
entry->flags |= (*p << 16);
}
while (*p & 0x80)
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
p++;
}
entry->subtuples = q-p;
- return CS_SUCCESS;
+ return 0;
}
#endif
p += 6;
}
geo->ngeo = n;
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
u_char *p, *q;
if (tuple->TupleDataLen < 10)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = tuple->TupleData;
q = p + tuple->TupleDataLen;
p = tuple->TupleData;
q = p + tuple->TupleDataLen;
- if (p == q) return CS_BAD_TUPLE;
+ if (p == q)
+ return -EINVAL;
org->data_org = *p;
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
for (i = 0; i < 30; i++) {
org->desc[i] = *p;
if (*p == '\0') break;
- if (++p == q) return CS_BAD_TUPLE;
+ if (++p == q)
+ return -EINVAL;
}
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
u_char *p;
if (tuple->TupleDataLen < 10)
- return CS_BAD_TUPLE;
+ return -EINVAL;
p = tuple->TupleData;
fmt->offset = get_unaligned_le32(p + 2);
fmt->length = get_unaligned_le32(p + 6);
- return CS_SUCCESS;
+ return 0;
}
/*====================================================================*/
-int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse)
+int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse)
{
- int ret = CS_SUCCESS;
+ int ret = 0;
if (tuple->TupleDataLen > tuple->TupleDataMax)
- return CS_BAD_TUPLE;
+ return -EINVAL;
switch (tuple->TupleCode) {
case CISTPL_DEVICE:
case CISTPL_DEVICE_A:
break;
case CISTPL_NO_LINK:
case CISTPL_LINKTARGET:
- ret = CS_SUCCESS;
+ ret = 0;
break;
default:
- ret = CS_UNSUPPORTED_FUNCTION;
+ ret = -EINVAL;
break;
}
+ if (ret)
+ __cs_dbg(0, "parse_tuple failed %d\n", ret);
return ret;
}
-EXPORT_SYMBOL(pccard_parse_tuple);
+EXPORT_SYMBOL(pcmcia_parse_tuple);
/*======================================================================
int ret;
buf = kmalloc(256, GFP_KERNEL);
- if (buf == NULL)
- return CS_OUT_OF_RESOURCE;
+ if (buf == NULL) {
+ dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+ return -ENOMEM;
+ }
tuple.DesiredTuple = code;
tuple.Attributes = TUPLE_RETURN_COMMON;
ret = pccard_get_first_tuple(s, function, &tuple);
- if (ret != CS_SUCCESS) goto done;
+ if (ret != 0)
+ goto done;
tuple.TupleData = buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
ret = pccard_get_tuple_data(s, &tuple);
- if (ret != CS_SUCCESS) goto done;
- ret = pccard_parse_tuple(&tuple, parse);
+ if (ret != 0)
+ goto done;
+ ret = pcmcia_parse_tuple(&tuple, parse);
done:
kfree(buf);
return ret;
int ret, reserved, dev_ok = 0, ident_ok = 0;
if (!s)
- return CS_BAD_HANDLE;
+ return -EINVAL;
tuple = kmalloc(sizeof(*tuple), GFP_KERNEL);
- if (tuple == NULL)
- return CS_OUT_OF_RESOURCE;
+ if (tuple == NULL) {
+ dev_printk(KERN_WARNING, &s->dev, "no memory to validate CIS\n");
+ return -ENOMEM;
+ }
p = kmalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL) {
- kfree(tuple);
- return CS_OUT_OF_RESOURCE;
+ kfree(tuple);
+ dev_printk(KERN_WARNING, &s->dev, "no memory to validate CIS\n");
+ return -ENOMEM;
}
count = reserved = 0;
tuple->DesiredTuple = RETURN_FIRST_TUPLE;
tuple->Attributes = TUPLE_RETURN_COMMON;
ret = pccard_get_first_tuple(s, function, tuple);
- if (ret != CS_SUCCESS)
+ if (ret != 0)
goto done;
/* First tuple should be DEVICE; we should really have either that
or a CFTABLE_ENTRY of some sort */
if ((tuple->TupleCode == CISTPL_DEVICE) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == CS_SUCCESS) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == CS_SUCCESS))
+ (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+ (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
dev_ok++;
/* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
tuple, for card identification. Certain old D-Link and Linksys
cards have only a broken VERS_2 tuple; hence the bogus test. */
- if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == CS_SUCCESS) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == CS_SUCCESS) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != CS_NO_MORE_ITEMS))
+ if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
+ (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
+ (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
ident_ok++;
if (!dev_ok && !ident_ok)
for (count = 1; count < MAX_TUPLES; count++) {
ret = pccard_get_next_tuple(s, function, tuple);
- if (ret != CS_SUCCESS) break;
+ if (ret != 0)
+ break;
if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
((tuple->TupleCode > 0x47) && (tuple->TupleCode < 0x80)) ||
((tuple->TupleCode > 0x90) && (tuple->TupleCode < 0xff)))
*info = count;
kfree(tuple);
kfree(p);
- return CS_SUCCESS;
+ return 0;
}
EXPORT_SYMBOL(pccard_validate_cis);
/* Access speed for attribute memory windows */
INT_MODULE_PARM(cis_speed, 300); /* ns */
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
wait_for_completion(&socket->thread_done);
if (!socket->thread) {
- printk(KERN_WARNING "PCMCIA: warning: socket thread for socket %p did not start\n", socket);
+ dev_printk(KERN_WARNING, &socket->dev,
+ "PCMCIA: warning: socket thread did not start\n");
return -EIO;
}
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
- return CS_NO_CARD;
+ return -ENODEV;
if (status & SS_READY)
- return CS_SUCCESS;
+ return 0;
msleep(unreset_check * 10);
}
cs_err(skt, "time out after reset.\n");
- return CS_GENERAL_FAILURE;
+ return -ETIMEDOUT;
}
/*
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
- printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
+ dev_printk(KERN_ERR, &s->dev,
+ "*** DANGER *** unable to remove socket power\n");
}
cs_socket_put(s);
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
- return CS_NO_CARD;
+ return -ENODEV;
msleep(initial_delay * 10);
for (i = 0; i < 100; i++) {
skt->ops->get_status(skt, &status);
if (!(status & SS_DETECT))
- return CS_NO_CARD;
+ return -ENODEV;
if (!(status & SS_PENDING))
break;
if (status & SS_PENDING) {
cs_err(skt, "voltage interrogation timed out.\n");
- return CS_GENERAL_FAILURE;
+ return -ETIMEDOUT;
}
if (status & SS_CARDBUS) {
if (!(skt->features & SS_CAP_CARDBUS)) {
cs_err(skt, "cardbus cards are not supported.\n");
- return CS_BAD_TYPE;
+ return -EINVAL;
}
skt->state |= SOCKET_CARDBUS;
}
skt->socket.Vcc = skt->socket.Vpp = 50;
else {
cs_err(skt, "unsupported voltage key.\n");
- return CS_BAD_TYPE;
+ return -EIO;
}
if (skt->power_hook)
skt->ops->get_status(skt, &status);
if (!(status & SS_POWERON)) {
cs_err(skt, "unable to apply power.\n");
- return CS_BAD_TYPE;
+ return -EIO;
}
status = socket_reset(skt);
cs_dbg(skt, 4, "insert\n");
if (!cs_socket_get(skt))
- return CS_NO_CARD;
+ return -ENODEV;
ret = socket_setup(skt, setup_delay);
- if (ret == CS_SUCCESS) {
+ if (ret == 0) {
skt->state |= SOCKET_PRESENT;
- printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n",
- (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
- skt->sock);
+ dev_printk(KERN_NOTICE, &skt->dev,
+ "pccard: %s card inserted into slot %d\n",
+ (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
+ skt->sock);
#ifdef CONFIG_CARDBUS
if (skt->state & SOCKET_CARDBUS) {
static int socket_suspend(struct pcmcia_socket *skt)
{
if (skt->state & SOCKET_SUSPEND)
- return CS_IN_USE;
+ return -EBUSY;
send_event(skt, CS_EVENT_PM_SUSPEND, CS_EVENT_PRI_LOW);
skt->socket = dead_socket;
skt->ops->suspend(skt);
skt->state |= SOCKET_SUSPEND;
- return CS_SUCCESS;
+ return 0;
}
/*
int ret;
if (!(skt->state & SOCKET_SUSPEND))
- return CS_IN_USE;
+ return -EBUSY;
skt->socket = dead_socket;
skt->ops->init(skt);
}
ret = socket_setup(skt, resume_delay);
- if (ret == CS_SUCCESS) {
+ if (ret == 0) {
/*
* FIXME: need a better check here for cardbus cards.
*/
skt->state &= ~SOCKET_SUSPEND;
- return CS_SUCCESS;
+ return 0;
}
static void socket_remove(struct pcmcia_socket *skt)
{
- printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
+ dev_printk(KERN_NOTICE, &skt->dev,
+ "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
}
/* register with the device core */
ret = device_register(&skt->dev);
if (ret) {
- printk(KERN_WARNING "PCMCIA: unable to register socket 0x%p\n",
- skt);
+ dev_printk(KERN_WARNING, &skt->dev,
+ "PCMCIA: unable to register socket\n");
skt->thread = NULL;
complete(&skt->thread_done);
return 0;
* CIS register.
*/
-int pccard_reset_card(struct pcmcia_socket *skt)
+int pcmcia_reset_card(struct pcmcia_socket *skt)
{
int ret;
mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
- ret = CS_NO_CARD;
+ ret = -ENODEV;
break;
}
if (skt->state & SOCKET_SUSPEND) {
- ret = CS_IN_USE;
+ ret = -EBUSY;
break;
}
if (skt->state & SOCKET_CARDBUS) {
- ret = CS_UNSUPPORTED_FUNCTION;
+ ret = -EPERM;
break;
}
send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW);
if (skt->callback)
skt->callback->suspend(skt);
- if (socket_reset(skt) == CS_SUCCESS) {
+ if (socket_reset(skt) == 0) {
send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW);
if (skt->callback)
skt->callback->resume(skt);
}
}
- ret = CS_SUCCESS;
+ ret = 0;
} while (0);
mutex_unlock(&skt->skt_mutex);
return ret;
} /* reset_card */
-EXPORT_SYMBOL(pccard_reset_card);
+EXPORT_SYMBOL(pcmcia_reset_card);
/* These shut down or wake up a socket. They are sort of user
mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
- ret = CS_NO_CARD;
+ ret = -ENODEV;
break;
}
if (skt->state & SOCKET_CARDBUS) {
- ret = CS_UNSUPPORTED_FUNCTION;
+ ret = -EPERM;
break;
}
if (skt->callback) {
mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
- ret = CS_NO_CARD;
+ ret = -ENODEV;
break;
}
if (skt->state & SOCKET_CARDBUS) {
- ret = CS_UNSUPPORTED_FUNCTION;
+ ret = -EPERM;
break;
}
ret = socket_resume(skt);
ret = -EBUSY;
break;
}
- if (socket_insert(skt) == CS_NO_CARD) {
+ if (socket_insert(skt) == -ENODEV) {
ret = -ENODEV;
break;
}
/*
- * cs_internal.h
+ * cs_internal.h -- definitions internal to the PCMCIA core modules
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
* (C) 1999 David A. Hinds
+ * (C) 2003 - 2008 Dominik Brodowski
+ *
+ *
+ * This file contains definitions _only_ needed by the PCMCIA core modules.
+ * It must not be included by PCMCIA socket drivers or by PCMCIA device
+ * drivers.
*/
#ifndef _LINUX_CS_INTERNAL_H
#include <linux/kref.h>
/* Flags in client state */
-#define CLIENT_CONFIG_LOCKED 0x0001
-#define CLIENT_IRQ_REQ 0x0002
-#define CLIENT_IO_REQ 0x0004
-#define CLIENT_UNBOUND 0x0008
-#define CLIENT_STALE 0x0010
#define CLIENT_WIN_REQ(i) (0x1<<(i))
-#define CLIENT_CARDBUS 0x8000
/* Each card function gets one of these guys */
typedef struct config_t {
struct kref ref;
- u_int state;
- u_int Attributes;
- u_int IntType;
- u_int ConfigBase;
- u_char Status, Pin, Copy, Option, ExtStatus;
- u_int CardValues;
- io_req_t io;
- struct {
- u_int Attributes;
- } irq;
+ unsigned int state;
+ unsigned int Attributes;
+ unsigned int IntType;
+ unsigned int ConfigBase;
+ unsigned char Status, Pin, Copy, Option, ExtStatus;
+ unsigned int CardValues;
+ io_req_t io;
+ struct {
+ u_int Attributes;
+ } irq;
} config_t;
+
struct cis_cache_entry {
struct list_head node;
unsigned int addr;
unsigned char cache[0];
};
+struct pccard_resource_ops {
+ int (*validate_mem) (struct pcmcia_socket *s);
+ int (*adjust_io_region) (struct resource *res,
+ unsigned long r_start,
+ unsigned long r_end,
+ struct pcmcia_socket *s);
+ struct resource* (*find_io) (unsigned long base, int num,
+ unsigned long align,
+ struct pcmcia_socket *s);
+ struct resource* (*find_mem) (unsigned long base, unsigned long num,
+ unsigned long align, int low,
+ struct pcmcia_socket *s);
+ int (*add_io) (struct pcmcia_socket *s,
+ unsigned int action,
+ unsigned long r_start,
+ unsigned long r_end);
+ int (*add_mem) (struct pcmcia_socket *s,
+ unsigned int action,
+ unsigned long r_start,
+ unsigned long r_end);
+ int (*init) (struct pcmcia_socket *s);
+ void (*exit) (struct pcmcia_socket *s);
+};
+
/* Flags in config state */
#define CONFIG_LOCKED 0x01
#define CONFIG_IRQ_REQ 0x02
#define SOCKET_INUSE 0x0010
#define SOCKET_SUSPEND 0x0080
#define SOCKET_WIN_REQ(i) (0x0100<<(i))
-#define SOCKET_REGION_INFO 0x4000
#define SOCKET_CARDBUS 0x8000
#define SOCKET_CARDBUS_CONFIG 0x10000
}
}
-/* In cardbus.c */
-int cb_alloc(struct pcmcia_socket *s);
-void cb_free(struct pcmcia_socket *s);
-int read_cb_mem(struct pcmcia_socket *s, int space, u_int addr, u_int len, void *ptr);
+#ifdef CONFIG_PCMCIA_DEBUG
+extern int cs_debug_level(int);
-/* In cistpl.c */
-int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
- u_int addr, u_int len, void *ptr);
-void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
- u_int addr, u_int len, void *ptr);
-void release_cis_mem(struct pcmcia_socket *s);
-void destroy_cis_cache(struct pcmcia_socket *s);
+#define cs_dbg(skt, lvl, fmt, arg...) do { \
+ if (cs_debug_level(lvl)) \
+ dev_printk(KERN_DEBUG, &skt->dev, \
+ "cs: " fmt, ## arg); \
+} while (0)
+#define __cs_dbg(lvl, fmt, arg...) do { \
+ if (cs_debug_level(lvl)) \
+ printk(KERN_DEBUG \
+ "cs: " fmt, ## arg); \
+} while (0)
+
+#else
+#define cs_dbg(skt, lvl, fmt, arg...) do { } while (0)
+#define __cs_dbg(lvl, fmt, arg...) do { } while (0)
+#endif
+
+#define cs_err(skt, fmt, arg...) \
+ dev_printk(KERN_ERR, &skt->dev, "cs: " fmt, ## arg)
+
+
+/*
+ * Stuff internal to module "pcmcia_core":
+ */
+
+/* cistpl.c */
int verify_cis_cache(struct pcmcia_socket *s);
-int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t code, void *parse);
-/* In rsrc_mgr */
-int pcmcia_validate_mem(struct pcmcia_socket *s);
-struct resource *pcmcia_find_io_region(unsigned long base, int num, unsigned long align,
- struct pcmcia_socket *s);
-int pcmcia_adjust_io_region(struct resource *res, unsigned long r_start,
- unsigned long r_end, struct pcmcia_socket *s);
-struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align,
- int low, struct pcmcia_socket *s);
+/* rsrc_mgr.c */
void release_resource_db(struct pcmcia_socket *s);
-/* In socket_sysfs.c */
+/* socket_sysfs.c */
extern int pccard_sysfs_add_socket(struct device *dev);
extern void pccard_sysfs_remove_socket(struct device *dev);
-/* In cs.c */
-extern struct rw_semaphore pcmcia_socket_list_rwsem;
-extern struct list_head pcmcia_socket_list;
-int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle, int idx, win_req_t *req);
-int pccard_get_configuration_info(struct pcmcia_socket *s, struct pcmcia_device *p_dev, config_info_t *config);
-int pccard_reset_card(struct pcmcia_socket *skt);
+/* cardbus.c */
+int cb_alloc(struct pcmcia_socket *s);
+void cb_free(struct pcmcia_socket *s);
+int read_cb_mem(struct pcmcia_socket *s, int space, u_int addr, u_int len,
+ void *ptr);
+
+/*
+ * Stuff exported by module "pcmcia_core" to module "pcmcia"
+ */
+
struct pcmcia_callback{
struct module *owner;
- int (*event) (struct pcmcia_socket *s, event_t event, int priority);
+ int (*event) (struct pcmcia_socket *s,
+ event_t event, int priority);
void (*requery) (struct pcmcia_socket *s, int new_cis);
int (*suspend) (struct pcmcia_socket *s);
int (*resume) (struct pcmcia_socket *s);
};
+/* cs.c */
+extern struct rw_semaphore pcmcia_socket_list_rwsem;
+extern struct list_head pcmcia_socket_list;
+extern struct class pcmcia_socket_class;
+
+int pcmcia_get_window(struct pcmcia_socket *s,
+ window_handle_t *handle,
+ int idx,
+ win_req_t *req);
int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c);
+struct pcmcia_socket *pcmcia_get_socket_by_nr(unsigned int nr);
-#define cs_socket_name(skt) ((skt)->dev.bus_id)
+int pcmcia_suspend_card(struct pcmcia_socket *skt);
+int pcmcia_resume_card(struct pcmcia_socket *skt);
-#ifdef DEBUG
-extern int cs_debug_level(int);
+int pcmcia_eject_card(struct pcmcia_socket *skt);
+int pcmcia_insert_card(struct pcmcia_socket *skt);
-#define cs_dbg(skt, lvl, fmt, arg...) do { \
- if (cs_debug_level(lvl)) \
- printk(KERN_DEBUG "cs: %s: " fmt, \
- cs_socket_name(skt) , ## arg); \
-} while (0)
+struct pcmcia_socket *pcmcia_get_socket(struct pcmcia_socket *skt);
+void pcmcia_put_socket(struct pcmcia_socket *skt);
-#else
-#define cs_dbg(skt, lvl, fmt, arg...) do { } while (0)
-#endif
+/* cistpl.c */
+int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
+ u_int addr, u_int len, void *ptr);
+void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
+ u_int addr, u_int len, void *ptr);
+void release_cis_mem(struct pcmcia_socket *s);
+void destroy_cis_cache(struct pcmcia_socket *s);
+int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
+ cisdata_t code, void *parse);
+int pcmcia_replace_cis(struct pcmcia_socket *s,
+ const u8 *data, const size_t len);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
+ unsigned int *count);
-#define cs_err(skt, fmt, arg...) \
- printk(KERN_ERR "cs: %s: " fmt, (skt)->dev.bus_id , ## arg)
+/* rsrc_mgr.c */
+int pcmcia_validate_mem(struct pcmcia_socket *s);
+struct resource *pcmcia_find_io_region(unsigned long base,
+ int num,
+ unsigned long align,
+ struct pcmcia_socket *s);
+int pcmcia_adjust_io_region(struct resource *res,
+ unsigned long r_start,
+ unsigned long r_end,
+ struct pcmcia_socket *s);
+struct resource *pcmcia_find_mem_region(u_long base,
+ u_long num,
+ u_long align,
+ int low,
+ struct pcmcia_socket *s);
+
+/*
+ * Stuff internal to module "pcmcia".
+ */
+/* ds.c */
+extern struct bus_type pcmcia_bus_type;
+
+/* pcmcia_resource.c */
+extern int pcmcia_release_configuration(struct pcmcia_device *p_dev);
+
+#ifdef CONFIG_PCMCIA_IOCTL
+/* ds.c */
+extern spinlock_t pcmcia_dev_list_lock;
+
+extern struct pcmcia_device *pcmcia_get_dev(struct pcmcia_device *p_dev);
+extern void pcmcia_put_dev(struct pcmcia_device *p_dev);
+
+struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
+ unsigned int function);
+
+/* pcmcia_ioctl.c */
+extern void __init pcmcia_setup_ioctl(void);
+extern void __exit pcmcia_cleanup_ioctl(void);
+extern void handle_event(struct pcmcia_socket *s, event_t event);
+extern int handle_request(struct pcmcia_socket *s, event_t event);
+
+#else /* CONFIG_PCMCIA_IOCTL */
+
+static inline void __init pcmcia_setup_ioctl(void) { return; }
+static inline void __exit pcmcia_cleanup_ioctl(void) { return; }
+static inline void handle_event(struct pcmcia_socket *s, event_t event)
+{
+ return;
+}
+static inline int handle_request(struct pcmcia_socket *s, event_t event)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PCMCIA_IOCTL */
#endif /* _LINUX_CS_INTERNAL_H */
#include <pcmcia/ss.h>
#include "cs_internal.h"
-#include "ds_internal.h"
/*====================================================================*/
MODULE_DESCRIPTION("PCMCIA Driver Services");
MODULE_LICENSE("GPL");
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
int ds_pc_debug;
module_param_named(pc_debug, ds_pc_debug, int, 0644);
#define ds_dbg(lvl, fmt, arg...) do { \
- if (ds_pc_debug > (lvl)) \
+ if (ds_pc_debug > (lvl)) \
printk(KERN_DEBUG "ds: " fmt , ## arg); \
} while (0)
+#define ds_dev_dbg(lvl, dev, fmt, arg...) do { \
+ if (ds_pc_debug > (lvl)) \
+ dev_printk(KERN_DEBUG, dev, "ds: " fmt , ## arg); \
+} while (0)
#else
#define ds_dbg(lvl, fmt, arg...) do { } while (0)
+#define ds_dev_dbg(lvl, dev, fmt, arg...) do { } while (0)
#endif
spinlock_t pcmcia_dev_list_lock;
/* String tables for error messages */
typedef struct lookup_t {
- int key;
- char *msg;
+ const int key;
+ const char *msg;
} lookup_t;
static const lookup_t error_table[] = {
- { CS_SUCCESS, "Operation succeeded" },
- { CS_BAD_ADAPTER, "Bad adapter" },
- { CS_BAD_ATTRIBUTE, "Bad attribute", },
- { CS_BAD_BASE, "Bad base address" },
- { CS_BAD_EDC, "Bad EDC" },
- { CS_BAD_IRQ, "Bad IRQ" },
- { CS_BAD_OFFSET, "Bad offset" },
- { CS_BAD_PAGE, "Bad page number" },
- { CS_READ_FAILURE, "Read failure" },
- { CS_BAD_SIZE, "Bad size" },
- { CS_BAD_SOCKET, "Bad socket" },
- { CS_BAD_TYPE, "Bad type" },
- { CS_BAD_VCC, "Bad Vcc" },
- { CS_BAD_VPP, "Bad Vpp" },
- { CS_BAD_WINDOW, "Bad window" },
- { CS_WRITE_FAILURE, "Write failure" },
- { CS_NO_CARD, "No card present" },
- { CS_UNSUPPORTED_FUNCTION, "Usupported function" },
- { CS_UNSUPPORTED_MODE, "Unsupported mode" },
- { CS_BAD_SPEED, "Bad speed" },
- { CS_BUSY, "Resource busy" },
- { CS_GENERAL_FAILURE, "General failure" },
- { CS_WRITE_PROTECTED, "Write protected" },
- { CS_BAD_ARG_LENGTH, "Bad argument length" },
- { CS_BAD_ARGS, "Bad arguments" },
- { CS_CONFIGURATION_LOCKED, "Configuration locked" },
- { CS_IN_USE, "Resource in use" },
- { CS_NO_MORE_ITEMS, "No more items" },
- { CS_OUT_OF_RESOURCE, "Out of resource" },
- { CS_BAD_HANDLE, "Bad handle" },
- { CS_BAD_TUPLE, "Bad CIS tuple" }
+ { 0, "Operation succeeded" },
+ { -EIO, "Input/Output error" },
+ { -ENODEV, "No card present" },
+ { -EINVAL, "Bad parameter" },
+ { -EACCES, "Configuration locked" },
+ { -EBUSY, "Resource in use" },
+ { -ENOSPC, "No more items" },
+ { -ENOMEM, "Out of resource" },
};
{ ReplaceCIS, "ReplaceCIS" }
};
-
-static int pcmcia_report_error(struct pcmcia_device *p_dev, error_info_t *err)
+const char *pcmcia_error_func(int func)
{
int i;
- char *serv;
-
- if (!p_dev)
- printk(KERN_NOTICE);
- else
- printk(KERN_NOTICE "%s: ", p_dev->dev.bus_id);
for (i = 0; i < ARRAY_SIZE(service_table); i++)
- if (service_table[i].key == err->func)
- break;
- if (i < ARRAY_SIZE(service_table))
- serv = service_table[i].msg;
- else
- serv = "Unknown service number";
+ if (service_table[i].key == func)
+ return service_table[i].msg;
- for (i = 0; i < ARRAY_SIZE(error_table); i++)
- if (error_table[i].key == err->retcode)
- break;
- if (i < ARRAY_SIZE(error_table))
- printk("%s: %s\n", serv, error_table[i].msg);
- else
- printk("%s: Unknown error code %#x\n", serv, err->retcode);
+ return "Unknown service number";
+}
+EXPORT_SYMBOL(pcmcia_error_func);
- return CS_SUCCESS;
-} /* report_error */
+const char *pcmcia_error_ret(int ret)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(error_table); i++)
+ if (error_table[i].key == ret)
+ return error_table[i].msg;
-/* end of code which was in cs.c before */
+ return "unknown";
+}
+EXPORT_SYMBOL(pcmcia_error_ret);
/*======================================================================*/
-void cs_error(struct pcmcia_device *p_dev, int func, int ret)
-{
- error_info_t err = { func, ret };
- pcmcia_report_error(p_dev, &err);
-}
-EXPORT_SYMBOL(cs_error);
static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
static void pcmcia_release_dev(struct device *dev)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
- ds_dbg(1, "releasing device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "releasing device\n");
pcmcia_put_socket(p_dev->socket);
kfree(p_dev->devname);
kref_put(&p_dev->function_config->ref, pcmcia_release_function);
static void pcmcia_add_device_later(struct pcmcia_socket *s, int mfc)
{
if (!s->pcmcia_state.device_add_pending) {
- ds_dbg(1, "scheduling to add %s secondary"
+ ds_dev_dbg(1, &s->dev, "scheduling to add %s secondary"
" device to %d\n", mfc ? "mfc" : "pfc", s->sock);
s->pcmcia_state.device_add_pending = 1;
s->pcmcia_state.mfc_pfc = mfc;
*/
did = p_dev->dev.driver_data;
- ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id,
- p_drv->drv.name);
+ ds_dev_dbg(1, dev, "trying to bind to %s\n", p_drv->drv.name);
if ((!p_drv->probe) || (!p_dev->function_config) ||
(!try_module_get(p_drv->owner))) {
p_dev->conf.ConfigBase = cis_config.base;
p_dev->conf.Present = cis_config.rmask[0];
} else {
- printk(KERN_INFO "pcmcia: could not parse base and rmask0 of CIS\n");
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: could not parse base and rmask0 of CIS\n");
p_dev->conf.ConfigBase = 0;
p_dev->conf.Present = 0;
}
ret = p_drv->probe(p_dev);
if (ret) {
- ds_dbg(1, "binding %s to %s failed with %d\n",
- p_dev->dev.bus_id, p_drv->drv.name, ret);
+ ds_dev_dbg(1, dev, "binding to %s failed with %d\n",
+ p_drv->drv.name, ret);
goto put_module;
}
struct pcmcia_device *tmp;
unsigned long flags;
- ds_dbg(2, "pcmcia_card_remove(%d) %s\n", s->sock,
- leftover ? leftover->devname : "");
+ ds_dev_dbg(2, leftover ? &leftover->dev : &s->dev,
+ "pcmcia_card_remove(%d) %s\n", s->sock,
+ leftover ? leftover->devname : "");
if (!leftover)
s->device_count = 0;
p_dev->_removed=1;
spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
- ds_dbg(2, "unregistering device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(2, &p_dev->dev, "unregistering device\n");
device_unregister(&p_dev->dev);
}
p_dev = to_pcmcia_dev(dev);
p_drv = to_pcmcia_drv(dev->driver);
- ds_dbg(1, "removing device %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "removing device\n");
/* If we're removing the primary module driving a
* pseudo multi-function card, we need to unbind
/* check for proper unloading */
if (p_dev->_irq || p_dev->_io || p_dev->_locked)
- printk(KERN_INFO "pcmcia: driver %s did not release config properly\n",
- p_drv->drv.name);
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: driver %s did not release config properly\n",
+ p_drv->drv.name);
for (i = 0; i < MAX_WIN; i++)
if (p_dev->_win & CLIENT_WIN_REQ(i))
- printk(KERN_INFO "pcmcia: driver %s did not release windows properly\n",
- p_drv->drv.name);
+ dev_printk(KERN_INFO, dev,
+ "pcmcia: driver %s did not release window properly\n",
+ p_drv->drv.name);
/* references from pcmcia_probe_device */
pcmcia_put_dev(p_dev);
}
if (!pccard_read_tuple(p_dev->socket, p_dev->func,
CISTPL_DEVICE_GEO, devgeo)) {
- ds_dbg(0, "mem device geometry probably means "
- "FUNCID_MEMORY\n");
+ ds_dev_dbg(0, &p_dev->dev,
+ "mem device geometry probably means "
+ "FUNCID_MEMORY\n");
p_dev->func_id = CISTPL_FUNCID_MEMORY;
p_dev->has_func_id = 1;
}
if (!p_dev->devname)
goto err_free;
sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id);
- ds_dbg(3, "devname is %s\n", p_dev->devname);
+ ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname);
spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
if (!p_dev->function_config) {
- ds_dbg(3, "creating config_t for %s\n", p_dev->dev.bus_id);
+ ds_dev_dbg(3, &p_dev->dev, "creating config_t\n");
p_dev->function_config = kzalloc(sizeof(struct config_t),
GFP_KERNEL);
if (!p_dev->function_config)
kref_init(&p_dev->function_config->ref);
}
- printk(KERN_NOTICE "pcmcia: registering new device %s\n",
- p_dev->devname);
+ dev_printk(KERN_NOTICE, &p_dev->dev,
+ "pcmcia: registering new device %s\n",
+ p_dev->devname);
pcmcia_device_query(p_dev);
int ret = 0;
if (!(s->resource_setup_done)) {
- ds_dbg(3, "no resources available, delaying card_add\n");
+ ds_dev_dbg(3, &s->dev,
+ "no resources available, delaying card_add\n");
return -EAGAIN; /* try again, but later... */
}
if (pcmcia_validate_mem(s)) {
- ds_dbg(3, "validating mem resources failed, "
+ ds_dev_dbg(3, &s->dev, "validating mem resources failed, "
"delaying card_add\n");
return -EAGAIN; /* try again, but later... */
}
ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
if (ret || !no_chains) {
- ds_dbg(0, "invalid CIS or invalid resources\n");
+ ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
}
{
struct pcmcia_socket *s =
container_of(work, struct pcmcia_socket, device_add);
- ds_dbg(1, "adding additional device to %d\n", s->sock);
+ ds_dev_dbg(1, &s->dev, "adding additional device to %d\n", s->sock);
pcmcia_device_add(s, s->pcmcia_state.mfc_pfc);
s->pcmcia_state.device_add_pending = 0;
s->pcmcia_state.mfc_pfc = 0;
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
if (!p_dev->dev.driver) {
- ds_dbg(1, "update device information for %s\n",
- p_dev->dev.bus_id);
+ ds_dev_dbg(1, dev, "update device information\n");
pcmcia_device_query(p_dev);
}
unsigned long flags;
/* must be called with skt_mutex held */
- ds_dbg(0, "re-scanning socket %d\n", skt->sock);
+ ds_dev_dbg(0, &skt->dev, "re-scanning socket %d\n", skt->sock);
spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
if (list_empty(&skt->devices_list))
int ret = -ENOMEM;
int no_funcs;
int old_funcs;
- cisdump_t *cis;
cistpl_longlink_mfc_t mfc;
if (!filename)
return -EINVAL;
- ds_dbg(1, "trying to load CIS file %s\n", filename);
+ ds_dev_dbg(1, &dev->dev, "trying to load CIS file %s\n", filename);
if (strlen(filename) > (FIRMWARE_NAME_MAX - 1)) {
- printk(KERN_WARNING "pcmcia: CIS filename is too long [%s]\n",
- filename);
+ dev_printk(KERN_WARNING, &dev->dev,
+ "pcmcia: CIS filename is too long [%s]\n",
+ filename);
return -EINVAL;
}
if (request_firmware(&fw, path, &dev->dev) == 0) {
if (fw->size >= CISTPL_MAX_CIS_SIZE) {
ret = -EINVAL;
- printk(KERN_ERR "pcmcia: CIS override is too big\n");
+ dev_printk(KERN_ERR, &dev->dev,
+ "pcmcia: CIS override is too big\n");
goto release;
}
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis) {
- ret = -ENOMEM;
- goto release;
- }
-
- cis->Length = fw->size + 1;
- memcpy(cis->Data, fw->data, fw->size);
-
- if (!pcmcia_replace_cis(s, cis))
+ if (!pcmcia_replace_cis(s, fw->data, fw->size))
ret = 0;
else {
- printk(KERN_ERR "pcmcia: CIS override failed\n");
+ dev_printk(KERN_ERR, &dev->dev,
+ "pcmcia: CIS override failed\n");
goto release;
}
* after it has re-checked that there is no possible module
* with a prod_id/manf_id/card_id match.
*/
- ds_dbg(0, "skipping FUNC_ID match for %s until userspace "
- "interaction\n", dev->dev.bus_id);
+ ds_dev_dbg(0, &dev->dev,
+ "skipping FUNC_ID match until userspace interaction\n");
if (!dev->allow_func_id_match)
return 0;
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_FAKE_CIS) {
- ds_dbg(0, "device %s needs a fake CIS\n", dev->dev.bus_id);
+ ds_dev_dbg(0, &dev->dev, "device needs a fake CIS\n");
if (!dev->socket->fake_cis)
pcmcia_load_firmware(dev, did->cisfile);
/* match dynamic devices first */
spin_lock(&p_drv->dynids.lock);
list_for_each_entry(dynid, &p_drv->dynids.list, node) {
- ds_dbg(3, "trying to match %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
if (pcmcia_devmatch(p_dev, &dynid->id)) {
- ds_dbg(0, "matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
spin_unlock(&p_drv->dynids.lock);
return 1;
}
#ifdef CONFIG_PCMCIA_IOCTL
/* matching by cardmgr */
if (p_dev->cardmgr == p_drv) {
- ds_dbg(0, "cardmgr matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "cardmgr matched to %s\n", drv->name);
return 1;
}
#endif
while (did && did->match_flags) {
- ds_dbg(3, "trying to match %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
if (pcmcia_devmatch(p_dev, did)) {
- ds_dbg(0, "matched %s to %s\n", dev->bus_id,
- drv->name);
+ ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
return 1;
}
did++;
if (p_dev->suspended)
return 0;
- ds_dbg(2, "suspending %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "suspending\n");
if (dev->driver)
p_drv = to_pcmcia_drv(dev->driver);
if (p_drv->suspend) {
ret = p_drv->suspend(p_dev);
if (ret) {
- printk(KERN_ERR "pcmcia: device %s (driver %s) did "
- "not want to go to sleep (%d)\n",
- p_dev->devname, p_drv->drv.name, ret);
+ dev_printk(KERN_ERR, dev,
+ "pcmcia: device %s (driver %s) did "
+ "not want to go to sleep (%d)\n",
+ p_dev->devname, p_drv->drv.name, ret);
goto out;
}
}
if (p_dev->device_no == p_dev->func) {
- ds_dbg(2, "releasing configuration for %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "releasing configuration\n");
pcmcia_release_configuration(p_dev);
}
if (!p_dev->suspended)
return 0;
- ds_dbg(2, "resuming %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "resuming\n");
if (dev->driver)
p_drv = to_pcmcia_drv(dev->driver);
goto out;
if (p_dev->device_no == p_dev->func) {
- ds_dbg(2, "requesting configuration for %s\n", dev->bus_id);
+ ds_dev_dbg(2, dev, "requesting configuration\n");
ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
if (ret)
goto out;
static int pcmcia_bus_resume(struct pcmcia_socket *skt)
{
- ds_dbg(2, "resuming socket %d\n", skt->sock);
+ ds_dev_dbg(2, &skt->dev, "resuming socket %d\n", skt->sock);
bus_for_each_dev(&pcmcia_bus_type, NULL, skt, pcmcia_bus_resume_callback);
return 0;
}
static int pcmcia_bus_suspend(struct pcmcia_socket *skt)
{
- ds_dbg(2, "suspending socket %d\n", skt->sock);
+ ds_dev_dbg(2, &skt->dev, "suspending socket %d\n", skt->sock);
if (bus_for_each_dev(&pcmcia_bus_type, NULL, skt,
pcmcia_bus_suspend_callback)) {
pcmcia_bus_resume(skt);
struct pcmcia_socket *s = pcmcia_get_socket(skt);
if (!s) {
- printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
- "failed, event 0x%x lost!\n", skt, event);
+ dev_printk(KERN_ERR, &skt->dev,
+ "PCMCIA obtaining reference to socket " \
+ "failed, event 0x%x lost!\n", event);
return -ENODEV;
}
- ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
- event, priority, skt);
+ ds_dev_dbg(1, &skt->dev, "ds_event(0x%06x, %d, 0x%p)\n",
+ event, priority, skt);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
socket = pcmcia_get_socket(socket);
if (!socket) {
- printk(KERN_ERR "PCMCIA obtaining reference to socket %p failed\n", socket);
+ dev_printk(KERN_ERR, dev,
+ "PCMCIA obtaining reference to socket failed\n");
return -ENODEV;
}
ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
if (ret) {
- printk(KERN_ERR "PCMCIA registration PCCard core failed for socket %p\n", socket);
+ dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return (ret);
}
+++ /dev/null
-/* ds_internal.h - internal header for 16-bit PCMCIA devices management */
-
-extern spinlock_t pcmcia_dev_list_lock;
-extern struct bus_type pcmcia_bus_type;
-
-extern struct pcmcia_device * pcmcia_get_dev(struct pcmcia_device *p_dev);
-extern void pcmcia_put_dev(struct pcmcia_device *p_dev);
-
-struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int function);
-
-extern int pcmcia_release_configuration(struct pcmcia_device *p_dev);
-
-#ifdef CONFIG_PCMCIA_IOCTL
-extern void __init pcmcia_setup_ioctl(void);
-extern void __exit pcmcia_cleanup_ioctl(void);
-extern void handle_event(struct pcmcia_socket *s, event_t event);
-extern int handle_request(struct pcmcia_socket *s, event_t event);
-#else
-static inline void __init pcmcia_setup_ioctl(void) { return; }
-static inline void __exit pcmcia_cleanup_ioctl(void) { return; }
-static inline void handle_event(struct pcmcia_socket *s, event_t event) { return; }
-static inline int handle_request(struct pcmcia_socket *s, event_t event) { return CS_SUCCESS; }
-#endif
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/ss.h>
-#include "cs_internal.h"
#define MODNAME "hd64465_ss"
#include "vg468.h"
#include "ricoh.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static const char version[] =
"i82365.c 1.265 1999/11/10 18:36:21 (David Hinds)";
#include "m32r_cfc.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int m32r_cfc_debug;
module_param(m32r_cfc_debug, int, 0644);
#define debug(lvl, fmt, arg...) do { \
pcc_set(sock,(unsigned int)PLD_CFBUFCR,1);
}
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
if(state->flags & SS_IOCARD){
debug(3, ":IOCARD");
}
#define PCC_DEBUG_DBEX
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int m32r_pcc_debug;
module_param(m32r_pcc_debug, int, 0644);
#define debug(lvl, fmt, arg...) do { \
pcc_set(sock,PCCSIGCR,reg);
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
if(state->flags & SS_IOCARD){
debug(3, ":IOCARD");
}
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
+#ifdef CONFIG_PCMCIA_DEBUG
+static int pc_debug;
module_param(pc_debug, int, 0);
#define dprintk(args...) printk(KERN_DEBUG "m8xx_pcmcia: " args);
#else
a = config_readb(socket, O2_RESERVED1);
b = config_readb(socket, O2_RESERVED2);
- printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
switch (socket->dev->device) {
/*
case PCI_DEVICE_ID_O2_6812:
case PCI_DEVICE_ID_O2_6832:
case PCI_DEVICE_ID_O2_6836:
- printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta O2: old bridge, disabling read "
+ "prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
config_writeb(socket, O2_RESERVED2,
break;
default:
- printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
+ dev_printk(KERN_INFO , &socket->dev->dev,
+ "O2: enabling read prefetch/write burst\n");
config_writeb(socket, O2_RESERVED1,
a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
config_writeb(socket, O2_RESERVED2,
#include <pcmcia/ss.h>
#include "cs_internal.h"
-#include "ds_internal.h"
static int major_dev = -1;
} user_info_t;
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern int ds_pc_debug;
#define ds_dbg(lvl, fmt, arg...) do { \
irq = adj->resource.irq.IRQ;
if ((irq < 0) || (irq > 15))
- return CS_BAD_IRQ;
+ return -EINVAL;
if (adj->Action != REMOVE_MANAGED_RESOURCE)
return 0;
#else
static inline int adjust_irq(struct pcmcia_socket *s, adjust_t *adj) {
- return CS_SUCCESS;
+ return 0;
}
#endif
static int pcmcia_adjust_resource_info(adjust_t *adj)
{
struct pcmcia_socket *s;
- int ret = CS_UNSUPPORTED_FUNCTION;
+ int ret = -ENOSYS;
unsigned long flags;
down_read(&pcmcia_socket_list_rwsem);
if (s->state & SOCKET_SUSPEND)
status->CardState |= CS_EVENT_PM_SUSPEND;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
c = (p_dev) ? p_dev->function_config : NULL;
status->CardState |=
(reg & ESR_REQ_ATTN) ? CS_EVENT_REQUEST_ATTENTION : 0;
}
- return CS_SUCCESS;
+ return 0;
}
status->CardState |=
(val & SS_WRPROT) ? CS_EVENT_WRITE_PROTECT : 0;
(val & SS_BATWARN) ? CS_EVENT_BATTERY_LOW : 0;
status->CardState |=
(val & SS_READY) ? CS_EVENT_READY_CHANGE : 0;
- return CS_SUCCESS;
+ return 0;
} /* pccard_get_status */
+int pccard_get_configuration_info(struct pcmcia_socket *s,
+ struct pcmcia_device *p_dev,
+ config_info_t *config)
+{
+ config_t *c;
+
+ if (!(s->state & SOCKET_PRESENT))
+ return -ENODEV;
+
+
+#ifdef CONFIG_CARDBUS
+ if (s->state & SOCKET_CARDBUS) {
+ memset(config, 0, sizeof(config_info_t));
+ config->Vcc = s->socket.Vcc;
+ config->Vpp1 = config->Vpp2 = s->socket.Vpp;
+ config->Option = s->cb_dev->subordinate->number;
+ if (s->state & SOCKET_CARDBUS_CONFIG) {
+ config->Attributes = CONF_VALID_CLIENT;
+ config->IntType = INT_CARDBUS;
+ config->AssignedIRQ = s->irq.AssignedIRQ;
+ if (config->AssignedIRQ)
+ config->Attributes |= CONF_ENABLE_IRQ;
+ if (s->io[0].res) {
+ config->BasePort1 = s->io[0].res->start;
+ config->NumPorts1 = s->io[0].res->end -
+ config->BasePort1 + 1;
+ }
+ }
+ return 0;
+ }
+#endif
+
+ if (p_dev) {
+ c = p_dev->function_config;
+ config->Function = p_dev->func;
+ } else {
+ c = NULL;
+ config->Function = 0;
+ }
+
+ if ((c == NULL) || !(c->state & CONFIG_LOCKED)) {
+ config->Attributes = 0;
+ config->Vcc = s->socket.Vcc;
+ config->Vpp1 = config->Vpp2 = s->socket.Vpp;
+ return 0;
+ }
+
+ config->Attributes = c->Attributes | CONF_VALID_CLIENT;
+ config->Vcc = s->socket.Vcc;
+ config->Vpp1 = config->Vpp2 = s->socket.Vpp;
+ config->IntType = c->IntType;
+ config->ConfigBase = c->ConfigBase;
+ config->Status = c->Status;
+ config->Pin = c->Pin;
+ config->Copy = c->Copy;
+ config->Option = c->Option;
+ config->ExtStatus = c->ExtStatus;
+ config->Present = config->CardValues = c->CardValues;
+ config->IRQAttributes = c->irq.Attributes;
+ config->AssignedIRQ = s->irq.AssignedIRQ;
+ config->BasePort1 = c->io.BasePort1;
+ config->NumPorts1 = c->io.NumPorts1;
+ config->Attributes1 = c->io.Attributes1;
+ config->BasePort2 = c->io.BasePort2;
+ config->NumPorts2 = c->io.NumPorts2;
+ config->Attributes2 = c->io.Attributes2;
+ config->IOAddrLines = c->io.IOAddrLines;
+
+ return 0;
+} /* pccard_get_configuration_info */
+
+
/*======================================================================
These manage a ring buffer of events pending for one user process
case DS_GET_CONFIGURATION_INFO:
if (buf->config.Function &&
(buf->config.Function >= s->functions))
- ret = CS_BAD_ARGS;
+ ret = -EINVAL;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
ret = pccard_get_configuration_info(s, p_dev, &buf->config);
break;
case DS_PARSE_TUPLE:
buf->tuple.TupleData = buf->tuple_parse.data;
- ret = pccard_parse_tuple(&buf->tuple, &buf->tuple_parse.parse);
+ ret = pcmcia_parse_tuple(&buf->tuple, &buf->tuple_parse.parse);
break;
case DS_RESET_CARD:
- ret = pccard_reset_card(s);
+ ret = pcmcia_reset_card(s);
break;
case DS_GET_STATUS:
if (buf->status.Function &&
(buf->status.Function >= s->functions))
- ret = CS_BAD_ARGS;
+ ret = -EINVAL;
else {
struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
ret = pccard_get_status(s, p_dev, &buf->status);
goto free_out;
}
- ret = CS_BAD_ARGS;
+ ret = -EINVAL;
if (!(buf->conf_reg.Function &&
(buf->conf_reg.Function >= s->functions))) {
&buf->win_info.map);
break;
case DS_REPLACE_CIS:
- ret = pcmcia_replace_cis(s, &buf->cisdump);
+ ret = pcmcia_replace_cis(s, buf->cisdump.Data, buf->cisdump.Length);
break;
case DS_BIND_REQUEST:
if (!capable(CAP_SYS_ADMIN)) {
err = -EINVAL;
}
- if ((err == 0) && (ret != CS_SUCCESS)) {
+ if ((err == 0) && (ret != 0)) {
ds_dbg(2, "ds_ioctl: ret = %d\n", ret);
switch (ret) {
- case CS_BAD_SOCKET: case CS_NO_CARD:
- err = -ENODEV; break;
- case CS_BAD_ARGS: case CS_BAD_ATTRIBUTE: case CS_BAD_IRQ:
- case CS_BAD_TUPLE:
- err = -EINVAL; break;
- case CS_IN_USE:
- err = -EBUSY; break;
- case CS_OUT_OF_RESOURCE:
+ case -ENODEV:
+ case -EINVAL:
+ case -EBUSY:
+ case -ENOSYS:
+ err = ret;
+ break;
+ case -ENOMEM:
err = -ENOSPC; break;
- case CS_NO_MORE_ITEMS:
+ case -ENOSPC:
err = -ENODATA; break;
- case CS_UNSUPPORTED_FUNCTION:
- err = -ENOSYS; break;
default:
err = -EIO; break;
}
#include <pcmcia/ds.h>
#include "cs_internal.h"
-#include "ds_internal.h"
/* Access speed for IO windows */
#endif
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern int ds_pc_debug;
#define ds_dbg(skt, lvl, fmt, arg...) do { \
if (ds_pc_debug >= lvl) \
- printk(KERN_DEBUG "pcmcia_resource: %s: " fmt, \
- cs_socket_name(skt) , ## arg); \
+ dev_printk(KERN_DEBUG, &skt->dev, \
+ "pcmcia_resource: " fmt, \
+ ## arg); \
} while (0)
#else
-#define ds_dbg(lvl, fmt, arg...) do { } while (0)
+#define ds_dbg(skt, lvl, fmt, arg...) do { } while (0)
#endif
u_char val;
if (!p_dev || !p_dev->function_config)
- return CS_NO_CARD;
+ return -EINVAL;
s = p_dev->socket;
c = p_dev->function_config;
if (!(c->state & CONFIG_LOCKED))
- return CS_CONFIGURATION_LOCKED;
+ return -EACCES;
addr = (c->ConfigBase + reg->Offset) >> 1;
pcmcia_write_cis_mem(s, 1, addr, 1, &val);
break;
default:
- return CS_BAD_ARGS;
+ return -EINVAL;
break;
}
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_access_configuration_register */
EXPORT_SYMBOL(pcmcia_access_configuration_register);
-int pccard_get_configuration_info(struct pcmcia_socket *s,
- struct pcmcia_device *p_dev,
- config_info_t *config)
-{
- config_t *c;
-
- if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
-
-
-#ifdef CONFIG_CARDBUS
- if (s->state & SOCKET_CARDBUS) {
- memset(config, 0, sizeof(config_info_t));
- config->Vcc = s->socket.Vcc;
- config->Vpp1 = config->Vpp2 = s->socket.Vpp;
- config->Option = s->cb_dev->subordinate->number;
- if (s->state & SOCKET_CARDBUS_CONFIG) {
- config->Attributes = CONF_VALID_CLIENT;
- config->IntType = INT_CARDBUS;
- config->AssignedIRQ = s->irq.AssignedIRQ;
- if (config->AssignedIRQ)
- config->Attributes |= CONF_ENABLE_IRQ;
- if (s->io[0].res) {
- config->BasePort1 = s->io[0].res->start;
- config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1;
- }
- }
- return CS_SUCCESS;
- }
-#endif
-
- if (p_dev) {
- c = p_dev->function_config;
- config->Function = p_dev->func;
- } else {
- c = NULL;
- config->Function = 0;
- }
-
- if ((c == NULL) || !(c->state & CONFIG_LOCKED)) {
- config->Attributes = 0;
- config->Vcc = s->socket.Vcc;
- config->Vpp1 = config->Vpp2 = s->socket.Vpp;
- return CS_SUCCESS;
- }
-
- config->Attributes = c->Attributes | CONF_VALID_CLIENT;
- config->Vcc = s->socket.Vcc;
- config->Vpp1 = config->Vpp2 = s->socket.Vpp;
- config->IntType = c->IntType;
- config->ConfigBase = c->ConfigBase;
- config->Status = c->Status;
- config->Pin = c->Pin;
- config->Copy = c->Copy;
- config->Option = c->Option;
- config->ExtStatus = c->ExtStatus;
- config->Present = config->CardValues = c->CardValues;
- config->IRQAttributes = c->irq.Attributes;
- config->AssignedIRQ = s->irq.AssignedIRQ;
- config->BasePort1 = c->io.BasePort1;
- config->NumPorts1 = c->io.NumPorts1;
- config->Attributes1 = c->io.Attributes1;
- config->BasePort2 = c->io.BasePort2;
- config->NumPorts2 = c->io.NumPorts2;
- config->Attributes2 = c->io.Attributes2;
- config->IOAddrLines = c->io.IOAddrLines;
-
- return CS_SUCCESS;
-} /* pccard_get_configuration_info */
-
-int pcmcia_get_configuration_info(struct pcmcia_device *p_dev,
- config_info_t *config)
-{
- return pccard_get_configuration_info(p_dev->socket, p_dev,
- config);
-}
-EXPORT_SYMBOL(pcmcia_get_configuration_info);
-
-
/** pcmcia_get_window
*/
int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle,
int w;
if (!s || !(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
for (w = idx; w < MAX_WIN; w++)
if (s->state & SOCKET_WIN_REQ(w))
break;
if (w == MAX_WIN)
- return CS_NO_MORE_ITEMS;
+ return -EINVAL;
win = &s->win[w];
req->Base = win->ctl.res->start;
req->Size = win->ctl.res->end - win->ctl.res->start + 1;
if (win->ctl.flags & MAP_USE_WAIT)
req->Attributes |= WIN_USE_WAIT;
*handle = win;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_get_window */
EXPORT_SYMBOL(pcmcia_get_window);
int pcmcia_get_mem_page(window_handle_t win, memreq_t *req)
{
if ((win == NULL) || (win->magic != WINDOW_MAGIC))
- return CS_BAD_HANDLE;
+ return -EINVAL;
req->Page = 0;
req->CardOffset = win->ctl.card_start;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_get_mem_page */
EXPORT_SYMBOL(pcmcia_get_mem_page);
{
struct pcmcia_socket *s;
if ((win == NULL) || (win->magic != WINDOW_MAGIC))
- return CS_BAD_HANDLE;
- if (req->Page != 0)
- return CS_BAD_PAGE;
+ return -EINVAL;
s = win->sock;
+ if (req->Page != 0) {
+ ds_dbg(s, 0, "failure: requested page is zero\n");
+ return -EINVAL;
+ }
win->ctl.card_start = req->CardOffset;
- if (s->ops->set_mem_map(s, &win->ctl) != 0)
- return CS_BAD_OFFSET;
- return CS_SUCCESS;
+ if (s->ops->set_mem_map(s, &win->ctl) != 0) {
+ ds_dbg(s, 0, "failed to set_mem_map\n");
+ return -EIO;
+ }
+ return 0;
} /* pcmcia_map_mem_page */
EXPORT_SYMBOL(pcmcia_map_mem_page);
c = p_dev->function_config;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
if (!(c->state & CONFIG_LOCKED))
- return CS_CONFIGURATION_LOCKED;
+ return -EACCES;
if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
if (mod->Attributes & CONF_ENABLE_IRQ) {
s->ops->set_socket(s, &s->socket);
}
- if (mod->Attributes & CONF_VCC_CHANGE_VALID)
- return CS_BAD_VCC;
+ if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
+ ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
+ return -EINVAL;
+ }
/* We only allow changing Vpp1 and Vpp2 to the same value */
if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
if (mod->Vpp1 != mod->Vpp2)
- return CS_BAD_VPP;
+ ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n");
+ return -EINVAL;
s->socket.Vpp = mod->Vpp1;
- if (s->ops->set_socket(s, &s->socket))
- return CS_BAD_VPP;
+ if (s->ops->set_socket(s, &s->socket)) {
+ dev_printk(KERN_WARNING, &s->dev,
+ "Unable to set VPP\n");
+ return -EIO;
+ }
} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
- (mod->Attributes & CONF_VPP2_CHANGE_VALID))
- return CS_BAD_VPP;
+ (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
+ ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
+ return -EINVAL;
+ }
if (mod->Attributes & CONF_IO_CHANGE_WIDTH) {
pccard_io_map io_off = { 0, 0, 0, 0, 1 };
}
}
- return CS_SUCCESS;
+ return 0;
} /* modify_configuration */
EXPORT_SYMBOL(pcmcia_modify_configuration);
}
}
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_release_configuration */
config_t *c = p_dev->function_config;
if (!p_dev->_io )
- return CS_BAD_HANDLE;
+ return -EINVAL;
p_dev->_io = 0;
(c->io.NumPorts1 != req->NumPorts1) ||
(c->io.BasePort2 != req->BasePort2) ||
(c->io.NumPorts2 != req->NumPorts2))
- return CS_BAD_ARGS;
+ return -EINVAL;
c->state &= ~CONFIG_IO_REQ;
if (req->NumPorts2)
release_io_space(s, req->BasePort2, req->NumPorts2);
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_release_io */
config_t *c= p_dev->function_config;
if (!p_dev->_irq)
- return CS_BAD_HANDLE;
+ return -EINVAL;
p_dev->_irq = 0;
if (c->state & CONFIG_LOCKED)
- return CS_CONFIGURATION_LOCKED;
- if (c->irq.Attributes != req->Attributes)
- return CS_BAD_ATTRIBUTE;
- if (s->irq.AssignedIRQ != req->AssignedIRQ)
- return CS_BAD_IRQ;
+ return -EACCES;
+ if (c->irq.Attributes != req->Attributes) {
+ ds_dbg(s, 0, "IRQ attributes must match assigned ones\n");
+ return -EINVAL;
+ }
+ if (s->irq.AssignedIRQ != req->AssignedIRQ) {
+ ds_dbg(s, 0, "IRQ must match assigned one\n");
+ return -EINVAL;
+ }
if (--s->irq.Config == 0) {
c->state &= ~CONFIG_IRQ_REQ;
s->irq.AssignedIRQ = 0;
pcmcia_used_irq[req->AssignedIRQ]--;
#endif
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_release_irq */
struct pcmcia_socket *s;
if ((win == NULL) || (win->magic != WINDOW_MAGIC))
- return CS_BAD_HANDLE;
+ return -EINVAL;
s = win->sock;
if (!(win->handle->_win & CLIENT_WIN_REQ(win->index)))
- return CS_BAD_HANDLE;
+ return -EINVAL;
/* Shut down memory window */
win->ctl.flags &= ~MAP_ACTIVE;
win->magic = 0;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_release_window */
EXPORT_SYMBOL(pcmcia_release_window);
pccard_io_map iomap;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;;
- if (req->IntType & INT_CARDBUS)
- return CS_UNSUPPORTED_MODE;
+ if (req->IntType & INT_CARDBUS) {
+ ds_dbg(p_dev->socket, 0, "IntType may not be INT_CARDBUS\n");
+ return -EINVAL;
+ }
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED)
- return CS_CONFIGURATION_LOCKED;
+ return -EACCES;
/* Do power control. We don't allow changes in Vcc. */
s->socket.Vpp = req->Vpp;
- if (s->ops->set_socket(s, &s->socket))
- return CS_BAD_VPP;
+ if (s->ops->set_socket(s, &s->socket)) {
+ dev_printk(KERN_WARNING, &s->dev,
+ "Unable to set socket state\n");
+ return -EINVAL;
+ }
/* Pick memory or I/O card, DMA mode, interrupt */
c->IntType = req->IntType;
c->state |= CONFIG_LOCKED;
p_dev->_locked = 1;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_request_configuration */
EXPORT_SYMBOL(pcmcia_request_configuration);
config_t *c;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
if (!req)
- return CS_UNSUPPORTED_MODE;
+ return -EINVAL;
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED)
- return CS_CONFIGURATION_LOCKED;
- if (c->state & CONFIG_IO_REQ)
- return CS_IN_USE;
- if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))
- return CS_BAD_ATTRIBUTE;
+ return -EACCES;
+ if (c->state & CONFIG_IO_REQ) {
+ ds_dbg(s, 0, "IO already configured\n");
+ return -EBUSY;
+ }
+ if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) {
+ ds_dbg(s, 0, "bad attribute setting for IO region 1\n");
+ return -EINVAL;
+ }
if ((req->NumPorts2 > 0) &&
- (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)))
- return CS_BAD_ATTRIBUTE;
+ (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) {
+ ds_dbg(s, 0, "bad attribute setting for IO region 2\n");
+ return -EINVAL;
+ }
+ ds_dbg(s, 1, "trying to allocate resource 1\n");
if (alloc_io_space(s, req->Attributes1, &req->BasePort1,
- req->NumPorts1, req->IOAddrLines))
- return CS_IN_USE;
+ req->NumPorts1, req->IOAddrLines)) {
+ ds_dbg(s, 0, "allocation of resource 1 failed\n");
+ return -EBUSY;
+ }
if (req->NumPorts2) {
+ ds_dbg(s, 1, "trying to allocate resource 2\n");
if (alloc_io_space(s, req->Attributes2, &req->BasePort2,
req->NumPorts2, req->IOAddrLines)) {
+ ds_dbg(s, 0, "allocation of resource 2 failed\n");
release_io_space(s, req->BasePort1, req->NumPorts1);
- return CS_IN_USE;
+ return -EBUSY;
}
}
c->io = *req;
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_request_io */
EXPORT_SYMBOL(pcmcia_request_io);
{
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
- int ret = CS_IN_USE, irq = 0;
+ int ret = -EINVAL, irq = 0;
int type;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
+ return -ENODEV;
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED)
- return CS_CONFIGURATION_LOCKED;
- if (c->state & CONFIG_IRQ_REQ)
- return CS_IN_USE;
+ return -EACCES;
+ if (c->state & CONFIG_IRQ_REQ) {
+ ds_dbg(s, 0, "IRQ already configured\n");
+ return -EBUSY;
+ }
/* Decide what type of interrupt we are registering */
type = 0;
}
if (ret && (req->Attributes & IRQ_HANDLE_PRESENT)) {
- if (request_irq(irq, req->Handler, type, p_dev->devname, req->Instance))
- return CS_IN_USE;
+ ret = request_irq(irq, req->Handler, type,
+ p_dev->devname, req->Instance);
+ if (ret)
+ return ret;
}
/* Make sure the fact the request type was overridden is passed back */
if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
- printk(KERN_WARNING "pcmcia: request for exclusive IRQ could not be fulfilled.\n");
- printk(KERN_WARNING "pcmcia: the driver needs updating to supported shared IRQ lines.\n");
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
+ "request for exclusive IRQ could not be fulfilled.\n");
+ dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
+ "needs updating to supported shared IRQ lines.\n");
}
c->irq.Attributes = req->Attributes;
s->irq.AssignedIRQ = req->AssignedIRQ = irq;
pcmcia_used_irq[irq]++;
#endif
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_request_irq */
EXPORT_SYMBOL(pcmcia_request_irq);
int w;
if (!(s->state & SOCKET_PRESENT))
- return CS_NO_CARD;
- if (req->Attributes & (WIN_PAGED | WIN_SHARED))
- return CS_BAD_ATTRIBUTE;
+ return -ENODEV;
+ if (req->Attributes & (WIN_PAGED | WIN_SHARED)) {
+ ds_dbg(s, 0, "bad attribute setting for iomem region\n");
+ return -EINVAL;
+ }
/* Window size defaults to smallest available */
if (req->Size == 0)
align = (((s->features & SS_CAP_MEM_ALIGN) ||
(req->Attributes & WIN_STRICT_ALIGN)) ?
req->Size : s->map_size);
- if (req->Size & (s->map_size-1))
- return CS_BAD_SIZE;
+ if (req->Size & (s->map_size-1)) {
+ ds_dbg(s, 0, "invalid map size\n");
+ return -EINVAL;
+ }
if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
- (req->Base & (align-1)))
- return CS_BAD_BASE;
+ (req->Base & (align-1))) {
+ ds_dbg(s, 0, "invalid base address\n");
+ return -EINVAL;
+ }
if (req->Base)
align = 0;
/* Allocate system memory window */
for (w = 0; w < MAX_WIN; w++)
if (!(s->state & SOCKET_WIN_REQ(w))) break;
- if (w == MAX_WIN)
- return CS_OUT_OF_RESOURCE;
+ if (w == MAX_WIN) {
+ ds_dbg(s, 0, "all windows are used already\n");
+ return -EINVAL;
+ }
win = &s->win[w];
win->magic = WINDOW_MAGIC;
if (!(s->features & SS_CAP_STATIC_MAP)) {
win->ctl.res = pcmcia_find_mem_region(req->Base, req->Size, align,
(req->Attributes & WIN_MAP_BELOW_1MB), s);
- if (!win->ctl.res)
- return CS_IN_USE;
+ if (!win->ctl.res) {
+ ds_dbg(s, 0, "allocating mem region failed\n");
+ return -EINVAL;
+ }
}
(*p_dev)->_win |= CLIENT_WIN_REQ(w);
if (req->Attributes & WIN_USE_WAIT)
win->ctl.flags |= MAP_USE_WAIT;
win->ctl.card_start = 0;
- if (s->ops->set_mem_map(s, &win->ctl) != 0)
- return CS_BAD_ARGS;
+ if (s->ops->set_mem_map(s, &win->ctl) != 0) {
+ ds_dbg(s, 0, "failed to set memory mapping\n");
+ return -EIO;
+ }
s->state |= SOCKET_WIN_REQ(w);
/* Return window handle */
}
*wh = win;
- return CS_SUCCESS;
+ return 0;
} /* pcmcia_request_window */
EXPORT_SYMBOL(pcmcia_request_window);
pcmcia_release_window(p_dev->win);
}
EXPORT_SYMBOL(pcmcia_disable_device);
+
+
+struct pcmcia_cfg_mem {
+ tuple_t tuple;
+ cisparse_t parse;
+ u8 buf[256];
+ cistpl_cftable_entry_t dflt;
+};
+
+/**
+ * pcmcia_loop_config() - loop over configuration options
+ * @p_dev: the struct pcmcia_device which we need to loop for.
+ * @conf_check: function to call for each configuration option.
+ * It gets passed the struct pcmcia_device, the CIS data
+ * describing the configuration option, and private data
+ * being passed to pcmcia_loop_config()
+ * @priv_data: private data to be passed to the conf_check function.
+ *
+ * pcmcia_loop_config() loops over all configuration options, and calls
+ * the driver-specific conf_check() for each one, checking whether
+ * it is a valid one.
+ */
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+ int (*conf_check) (struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data),
+ void *priv_data)
+{
+ struct pcmcia_cfg_mem *cfg_mem;
+
+ tuple_t *tuple;
+ int ret = -ENODEV;
+ unsigned int vcc;
+
+ cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL);
+ if (cfg_mem == NULL)
+ return -ENOMEM;
+
+ /* get the current Vcc setting */
+ vcc = p_dev->socket->socket.Vcc;
+
+ tuple = &cfg_mem->tuple;
+ tuple->TupleData = cfg_mem->buf;
+ tuple->TupleDataMax = 255;
+ tuple->TupleOffset = 0;
+ tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ tuple->Attributes = 0;
+
+ ret = pcmcia_get_first_tuple(p_dev, tuple);
+ while (!ret) {
+ cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
+
+ if (pcmcia_get_tuple_data(p_dev, tuple))
+ goto next_entry;
+
+ if (pcmcia_parse_tuple(tuple, &cfg_mem->parse))
+ goto next_entry;
+
+ /* default values */
+ p_dev->conf.ConfigIndex = cfg->index;
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ cfg_mem->dflt = *cfg;
+
+ ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data);
+ if (!ret)
+ break;
+
+next_entry:
+ ret = pcmcia_get_next_tuple(p_dev, tuple);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(pcmcia_loop_config);
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
#include "soc_common.h"
#include "pxa2xx_base.h"
static int add_interval(struct resource_map *map, u_long base, u_long num)
{
- struct resource_map *p, *q;
+ struct resource_map *p, *q;
- for (p = map; ; p = p->next) {
- if ((p != map) && (p->base+p->num-1 >= base))
- return -1;
- if ((p->next == map) || (p->next->base > base+num-1))
- break;
- }
- q = kmalloc(sizeof(struct resource_map), GFP_KERNEL);
- if (!q) return CS_OUT_OF_RESOURCE;
- q->base = base; q->num = num;
- q->next = p->next; p->next = q;
- return CS_SUCCESS;
+ for (p = map; ; p = p->next) {
+ if ((p != map) && (p->base+p->num-1 >= base))
+ return -1;
+ if ((p->next == map) || (p->next->base > base+num-1))
+ break;
+ }
+ q = kmalloc(sizeof(struct resource_map), GFP_KERNEL);
+ if (!q) {
+ printk(KERN_WARNING "out of memory to update resources\n");
+ return -ENOMEM;
+ }
+ q->base = base; q->num = num;
+ q->next = p->next; p->next = q;
+ return 0;
}
/*====================================================================*/
} else {
/* Split the block into two pieces */
p = kmalloc(sizeof(struct resource_map), GFP_KERNEL);
- if (!p) return CS_OUT_OF_RESOURCE;
+ if (!p) {
+ printk(KERN_WARNING "out of memory to update resources\n");
+ return -ENOMEM;
+ }
p->base = base+num;
p->num = q->base+q->num - p->base;
q->num = base - q->base;
}
}
}
- return CS_SUCCESS;
+ return 0;
}
/*======================================================================
int any;
u_char *b, hole, most;
- printk(KERN_INFO "cs: IO port probe %#x-%#x:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
+ base, base+num-1);
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
- printk(KERN_ERR "do_io_probe: unable to kmalloc 256 bytes");
+ dev_printk(KERN_ERR, &s->dev,
+ "do_io_probe: unable to kmalloc 256 bytes");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
struct socket_data *s_data = s->resource_data;
u_long i, j, bad, fail, step;
- printk(KERN_INFO "cs: memory probe 0x%06lx-0x%06lx:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
+ base, base+num-1);
bad = fail = 0;
step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
/* don't allow too large steps */
if (probe_mask & MEM_PROBE_HIGH) {
if (inv_probe(s_data->mem_db.next, s) > 0)
return 0;
- printk(KERN_NOTICE "cs: warning: no high memory space "
- "available!\n");
+ dev_printk(KERN_NOTICE, &s->dev,
+ "cs: warning: no high memory space available!\n");
return -ENODEV;
}
if (res->flags & IORESOURCE_IO) {
if (res == &ioport_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge I/O "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge I/O "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
if (res->flags & IORESOURCE_MEM) {
if (res == &iomem_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge Memory "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge Memory "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}
#include <mach/pxa-regs.h>
#endif
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
-#include "cs_internal.h"
struct device;
extern int soc_common_drv_pcmcia_remove(struct device *dev);
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
int lvl, const char *fmt, ...);
char *buf, loff_t off, size_t count)
{
struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
- cisdump_t *cis;
int error;
if (off)
return -EINVAL;
- if (count >= 0x200)
+ if (count >= CISTPL_MAX_CIS_SIZE)
return -EINVAL;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL);
- if (!cis)
- return -ENOMEM;
-
- cis->Length = count + 1;
- memcpy(cis->Data, buf, count);
-
- error = pcmcia_replace_cis(s, cis);
- kfree(cis);
+ error = pcmcia_replace_cis(s, buf, count);
if (error)
return -EIO;
#include <pcmcia/ss.h>
#include "tcic.h"
-#ifdef DEBUG
+#ifdef CONFIG_PCMCIA_DEBUG
static int pc_debug;
module_param(pc_debug, int, 0644);
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
/* make sure PCI interrupts are enabled before probing */
ti_init(socket);
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting (all serial or parallel)
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* for serial PCI make sure MFUNC3 is set to IRQSER */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts ok\n");
mfunc_old = mfunc;
goto out;
}
}
/* serial PCI interrupts not working fall back to parallel */
- printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: falling back to parallel PCI interrupts\n");
devctl &= ~TI113X_DCR_IMODE_MASK;
devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
mfunc_old = mfunc;
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
} else {
/* not working, back to old value */
mfunc = mfunc_old;
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta TI: no PCI interrupts. Fish. "
+ "Please report.\n");
}
}
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
- printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
- pci_name(socket->dev), mfunc, devctl);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
/* if IRQs are configured as tied, align irq of func1 with func0 */
sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting
*/
- printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
- pci_name(socket->dev));
-
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
/* if all serial: set INTRTIE, probe again */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts, tied ok\n");
goto out;
}
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
goto out;
}
if (pci_irq_status == -1)
goto out;
}
-
+
/* still nothing: set INTRTIE */
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
- printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts, tied ok\n");
goto out;
}
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
- printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
- pci_name(socket->dev));
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: no PCI interrupts. Fish. Please report.\n");
}
}
/* make sure that memory burst is active */
val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
- printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Disabling CLKRUN feature\n");
val |= TI113X_SCR_KEEPCLK;
}
if (!(val & TI122X_SCR_MRBURSTUP)) {
- printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Enabling burst memory read transactions\n");
val |= TI122X_SCR_MRBURSTUP;
}
if (val_orig != val)
* CSC interrupts to PCI rather than INTVAL.
*/
val = config_readb(socket, TI1250_DIAGNOSTIC);
- printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
- (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
- printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
- (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Using %s to route CSC interrupts to PCI\n",
+ (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Routing CardBus interrupts to %s\n",
+ (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
/* do irqrouting, depending on function */
if (PCI_FUNC(socket->dev->devfn) == 0)
diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
if (diag != old) {
- printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
- old, diag);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "adjusting diagnostic: %02x -> %02x\n",
+ old, diag);
config_writeb(socket, TI1250_DIAGNOSTIC, diag);
}
/* default to clear TLTEnable bit, old behaviour */
test_c9 &= ~ENE_TEST_C9_TLTENABLE;
- printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+ old_c9, test_c9);
config_writeb(socket, ENE_TEST_C9, test_c9);
}
module_param(pwr_irqs_off, bool, 0644);
MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
/* Don't ask.. */
#define to_cycles(ns) ((ns)/120)
static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
{
u32 val = readl(socket->base + reg);
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
return val;
}
static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
{
- debug("%p %04x %08x\n", socket, reg, val);
+ debug("%04x %08x\n", socket, reg, val);
writel(val, socket->base + reg);
readl(socket->base + reg); /* avoid problems with PCI write posting */
}
{
u8 val;
pci_read_config_byte(socket->dev, offset, &val);
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
return val;
}
{
u16 val;
pci_read_config_word(socket->dev, offset, &val);
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
return val;
}
{
u32 val;
pci_read_config_dword(socket->dev, offset, &val);
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
return val;
}
static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
{
- debug("%p %04x %02x\n", socket, offset, val);
+ debug("%04x %02x\n", socket, offset, val);
pci_write_config_byte(socket->dev, offset, val);
}
static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
{
- debug("%p %04x %04x\n", socket, offset, val);
+ debug("%04x %04x\n", socket, offset, val);
pci_write_config_word(socket->dev, offset, val);
}
static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
{
- debug("%p %04x %08x\n", socket, offset, val);
+ debug("%04x %08x\n", socket, offset, val);
pci_write_config_dword(socket->dev, offset, val);
}
static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
{
u8 val = readb(socket->base + 0x800 + reg);
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
return val;
}
u16 val;
val = readb(socket->base + 0x800 + reg);
val |= readb(socket->base + 0x800 + reg + 1) << 8;
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
return val;
}
static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
{
- debug("%p %04x %02x\n", socket, reg, val);
+ debug("%04x %02x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
readb(socket->base + 0x800 + reg); /* PCI write posting... */
}
static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
{
- debug("%p %04x %04x\n", socket, reg, val);
+ debug("%04x %04x\n", socket, reg, val);
writeb(val, socket->base + 0x800 + reg);
writeb(val >> 8, socket->base + 0x800 + reg + 1);
if (state & CB_CBCARD) {
- val |= SS_CARDBUS;
+ val |= SS_CARDBUS;
val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
root = pci_find_parent_resource(socket->dev, res);
if (root && (request_resource(root, res) == 0))
return 0;
- printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
- pci_name(socket->dev), nr);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Preassigned resource %d busy or not available, "
+ "reconfiguring...\n",
+ nr);
}
if (type & IORESOURCE_IO) {
return 1;
}
- printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
- pci_name(socket->dev), type);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "no resource of type %x available, trying to continue...\n",
+ type);
res->start = res->end = res->flags = 0;
return 0;
}
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
- printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+ dev_printk(KERN_WARNING, &socket->dev->dev,
+ "request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
else
socket->socket.irq_mask = 0;
- printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ socket->socket.irq_mask, socket->cb_irq);
}
/*
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->subordinate > upper_limit)
- printk(KERN_WARNING "Yenta: Upper limit for fixing this "
- "bridge's parent bridge: #%02x\n", upper_limit);
+ dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+ "Upper limit for fixing this "
+ "bridge's parent bridge: #%02x\n", upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->subordinate < upper_limit) {
unsigned char subordinate_to_assign =
min(cardbus_bridge->subordinate, upper_limit);
- printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
- "bus (#%02x) from #%02x to #%02x\n",
- bridge_to_fix->number,
- bridge_to_fix->subordinate, subordinate_to_assign);
+ dev_printk(KERN_INFO, &bridge_to_fix->dev,
+ "Raising subordinate bus# of parent "
+ "bus (#%02x) from #%02x to #%02x\n",
+ bridge_to_fix->number,
+ bridge_to_fix->subordinate, subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->subordinate = subordinate_to_assign;
* Bail out if so.
*/
if (!dev->subordinate) {
- printk(KERN_ERR "Yenta: no bus associated with %s! "
- "(try 'pci=assign-busses')\n", pci_name(dev));
+ dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+ "(try 'pci=assign-busses')\n");
return -ENODEV;
}
goto disable;
if (!pci_resource_start(dev, 0)) {
- printk(KERN_ERR "No cardbus resource!\n");
+ dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
- printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
- pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+ dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+ dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
socket->poll_timer.data = (unsigned long)socket;
socket->poll_timer.expires = jiffies + HZ;
add_timer(&socket->poll_timer);
- printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
- KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "no PCI IRQ, CardBus support disabled for this "
+ "socket.\n");
+ dev_printk(KERN_INFO, &dev->dev,
+ "check your BIOS CardBus, BIOS IRQ or ACPI "
+ "settings.\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
- printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ dev_printk(KERN_INFO, &dev->dev,
+ "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int aha152x_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ /* For New Media T&J, look for a SCSI window */
+ if (cfg->io.win[0].len >= 0x20)
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ else if ((cfg->io.nwin > 1) &&
+ (cfg->io.win[1].len >= 0x20))
+ p_dev->io.BasePort1 = cfg->io.win[1].base;
+ if ((cfg->io.nwin > 0) &&
+ (p_dev->io.BasePort1 < 0xffff)) {
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
+}
+
static int aha152x_config_cs(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
struct aha152x_setup s;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- u_char tuple_data[64];
+ int last_ret, last_fn;
struct Scsi_Host *host;
-
+
DEBUG(0, "aha152x_config(0x%p)\n", link);
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- /* For New Media T&J, look for a SCSI window */
- if (parse.cftable_entry.io.win[0].len >= 0x20)
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- else if ((parse.cftable_entry.io.nwin > 1) &&
- (parse.cftable_entry.io.win[1].len >= 0x20))
- link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
- if ((parse.cftable_entry.io.nwin > 0) &&
- (link->io.BasePort1 < 0xffff)) {
- link->conf.ConfigIndex = parse.cftable_entry.index;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
-
+
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
aha152x_release_cs(link);
return -ENODEV;
}
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int fdomain_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
+
static int fdomain_config(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- u_char tuple_data[64];
+ int last_ret, last_fn;
char str[22];
struct Scsi_Host *host;
DEBUG(0, "fdomain_config(0x%p)\n", link);
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
fdomain_release(link);
return -ENODEV;
} /* fdomain_config */
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-/*====================================================================*/
-static int nsp_cs_config(struct pcmcia_device *link)
-{
- int ret;
- scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int last_ret, last_fn;
- unsigned char tuple_data[64];
- config_info_t conf;
- win_req_t req;
- memreq_t map;
- cistpl_cftable_entry_t dflt = { 0 };
- struct Scsi_Host *host;
- nsp_hw_data *data = &nsp_data_base;
-
- nsp_dbg(NSP_DEBUG_INIT, "in");
-
- tuple.Attributes = 0;
- tuple.TupleData = tuple_data;
- tuple.TupleDataMax = sizeof(tuple_data);
- tuple.TupleOffset = 0;
-
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+struct nsp_cs_configdata {
+ nsp_hw_data *data;
+ win_req_t req;
+};
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
+static int nsp_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct nsp_cs_configdata *cfg_mem = priv_data;
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; }
- if (cfg->index == 0) { goto next_entry; }
- link->conf.ConfigIndex = cfg->index;
+ if (cfg->index == 0)
+ return -ENODEV;
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) {
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) {
- goto next_entry;
- }
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
+ else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+ return -ENODEV;
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp =
+ p_dev->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
}
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) {
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
goto next_entry;
}
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Attributes |= WIN_ENABLE;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
- if (req.Size < 0x1000) {
- req.Size = 0x1000;
- }
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ memreq_t map;
+ cistpl_mem_t *mem =
+ (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ cfg_mem->req.Attributes |= WIN_ENABLE;
+ cfg_mem->req.Base = mem->win[0].host_addr;
+ cfg_mem->req.Size = mem->win[0].len;
+ if (cfg_mem->req.Size < 0x1000)
+ cfg_mem->req.Size = 0x1000;
+ cfg_mem->req.AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
goto next_entry;
map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
goto next_entry;
- data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size);
- data->MmioLength = req.Size;
+ cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size);
+ cfg_mem->data->MmioLength = cfg_mem->req.Size;
}
/* If we got this far, we're cool! */
- break;
-
- next_entry:
- nsp_dbg(NSP_DEBUG_INIT, "next");
- pcmcia_disable_device(link);
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ return 0;
}
+next_entry:
+ nsp_dbg(NSP_DEBUG_INIT, "next");
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
+static int nsp_cs_config(struct pcmcia_device *link)
+{
+ int ret;
+ scsi_info_t *info = link->priv;
+ struct nsp_cs_configdata *cfg_mem;
+ struct Scsi_Host *host;
+ nsp_hw_data *data = &nsp_data_base;
+
+ nsp_dbg(NSP_DEBUG_INIT, "in");
+
+ cfg_mem = kzalloc(sizeof(cfg_mem), GFP_KERNEL);
+ if (!cfg_mem)
+ return -ENOMEM;
+ cfg_mem->data = data;
+
+ ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem);
+ goto cs_failed;
+
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (pcmcia_request_irq(link, &link->irq))
+ goto cs_failed;
}
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto cs_failed;
if (free_ports) {
if (link->io.BasePort1) {
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
+ cfg_mem->req.Base+cfg_mem->req.Size-1);
printk("\n");
+ kfree(cfg_mem);
return 0;
cs_failed:
nsp_dbg(NSP_DEBUG_INIT, "config fail");
- cs_error(link, last_fn, last_ret);
nsp_cs_release(link);
+ kfree(cfg_mem);
return -ENODEV;
} /* nsp_cs_config */
-#undef CS_CHECK
/*======================================================================
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int qlogic_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+ if (p_dev->io.BasePort1 == 0)
+ return -ENODEV;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int qlogic_config(struct pcmcia_device * link)
{
scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
- unsigned short tuple_data[32];
+ int last_ret, last_fn;
struct Scsi_Host *host;
DEBUG(0, "qlogic_config(0x%p)\n", link);
- info->manf_id = link->manf_id;
-
- tuple.TupleData = (cisdata_t *) tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- if (link->io.BasePort1 != 0) {
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
cs_failed:
cs_error(link, last_fn, last_ret);
pcmcia_disable_device(link);
+failed:
return -ENODEV;
} /* qlogic_config */
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int SYM53C500_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+ if (p_dev->io.BasePort1 == 0)
+ return -ENODEV;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int
SYM53C500_config(struct pcmcia_device *link)
{
struct scsi_info_t *info = link->priv;
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn;
+ int last_ret, last_fn;
int irq_level, port_base;
- unsigned short tuple_data[32];
struct Scsi_Host *host;
struct scsi_host_template *tpnt = &sym53c500_driver_template;
struct sym53c500_data *data;
info->manf_id = link->manf_id;
- tuple.TupleData = (cisdata_t *)tuple_data;
- tuple.TupleDataMax = 64;
- tuple.TupleOffset = 0;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- link->conf.ConfigIndex = parse.cftable_entry.index;
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
-
- if (link->io.BasePort1 != 0) {
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
-next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
cs_failed:
cs_error(link, last_fn, last_ret);
+failed:
SYM53C500_release(link);
return -ENODEV;
} /* SYM53C500_config */
{
int i;
i = pcmcia_get_first_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
- int i;
- i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ return pcmcia_parse_tuple(tuple, parse);
}
/*====================================================================*/
-static int simple_config(struct pcmcia_device *link)
+static int simple_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static const int size_table[2] = { 8, 16 };
- struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- config_info_t config;
- int i, j, try;
- int s;
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
+ && (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
+}
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+static int simple_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i = -ENODEV, try;
/* If the card is already configured, look up the port and irq */
- i = pcmcia_get_configuration_info(link, &config);
- if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+ if (link->function_config) {
unsigned int port = 0;
- if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
- port = config.BasePort2;
+ if ((link->io.BasePort2 != 0) &&
+ (link->io.NumPorts2 == 8)) {
+ port = link->io.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
- (config.NumPorts1 == 0x40)) {
- port = config.BasePort1 + 0x28;
+ (link->io.NumPorts1 == 0x40)) {
+ port = link->io.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave) {
- kfree(cfg_mem);
- return setup_serial(link, info, port, config.AssignedIRQ);
+ return setup_serial(link, info, port,
+ link->irq.AssignedIRQ);
}
}
- /* First pass: look for a config entry that looks normal. */
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (s = 0; s < 2; s++) {
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
- (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, tuple, parse);
- }
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 4; try++)
+ if (!pcmcia_loop_config(link, simple_config_check, &try))
+ goto found_port;
+
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
- ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, tuple, parse);
- }
+ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+ goto found_port;
- found_port:
- if (i != CS_SUCCESS) {
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
- kfree(cfg_mem);
- return -1;
- }
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link, RequestIO, i);
+ return -1;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
- kfree(cfg_mem);
return -1;
}
- kfree(cfg_mem);
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
-static int multi_config(struct pcmcia_device * link)
+static int multi_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- int i, rc, base2 = 0;
+ int *base2 = priv_data;
+
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort1 + 8;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ if (cf->io.nwin == 2) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.BasePort2 = cf->io.win[1].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort2;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+static int multi_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i, base2 = 0;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
- (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort1 + 8;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
- }
-
- /* If that didn't work, look for two windows */
- if (i != CS_SUCCESS) {
+ if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ /* If that didn't work, look for two windows */
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.BasePort2 = cf->io.win[1].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort2;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
+ if (pcmcia_loop_config(link, multi_config_check_notpicky,
+ &base2)) {
+ printk(KERN_NOTICE "serial_cs: no usable port range"
+ "found, giving up\n");
+ return -ENODEV;
}
}
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- rc = -1;
- goto free_cfg_mem;
- }
-
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
+ /* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
- rc = -1;
- goto free_cfg_mem;
+ return -ENODEV;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (cf->index == 1 || cf->index == 3) {
+ if (link->conf.ConfigIndex == 1 ||
+ link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
- rc = 0;
- goto free_cfg_mem;
+ return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
- rc = 0;
-free_cfg_mem:
- kfree(cfg_mem);
- return rc;
+ return 0;
}
/*======================================================================
/* Is this a compliant multifunction card? */
tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
- info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
+ info->multi = (first_tuple(link, tuple, parse) == 0);
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL))) {
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
+ if (first_tuple(link, tuple, parse) == 0) {
if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
info->multi = cf->io.win[0].len >> 3;
if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
reg.Action = CS_WRITE;
reg.Value = value;
res = pcmcia_access_configuration_register(bus->host_pcmcia, ®);
- if (unlikely(res != CS_SUCCESS))
+ if (unlikely(res != 0))
return -EBUSY;
return 0;
reg.Offset = offset;
reg.Action = CS_READ;
res = pcmcia_access_configuration_register(bus->host_pcmcia, ®);
- if (unlikely(res != CS_SUCCESS))
+ if (unlikely(res != 0))
return -EBUSY;
*value = reg.Value;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl");
+ GOTO_ERROR_ON(res != 0, "MAC first tpl");
res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data");
+ GOTO_ERROR_ON(res != 0, "MAC first tpl data");
while (1) {
GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
break;
res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl");
+ GOTO_ERROR_ON(res != 0, "MAC next tpl");
res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data");
+ GOTO_ERROR_ON(res != 0, "MAC next tpl data");
}
GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl");
+ GOTO_ERROR_ON(res != 0, "VEN first tpl");
res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data");
+ GOTO_ERROR_ON(res != 0, "VEN first tpl data");
while (1) {
GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
switch (tuple.TupleData[0]) {
break;
}
res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
- if (res == CS_NO_MORE_ITEMS)
+ if (res == -ENOSPC)
break;
- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl");
+ GOTO_ERROR_ON(res != 0, "VEN next tpl");
res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data");
+ GOTO_ERROR_ON(res != 0, "VEN next tpl data");
}
return 0;
return;
}
+static int ixj_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ixj_config(struct pcmcia_device * link)
{
IXJ *j;
ixj_info_t *info;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_cftable_entry_t dflt =
- {
- 0
- };
- int last_ret, last_fn;
+ cistpl_cftable_entry_t dflt = { 0 };
+
info = link->priv;
DEBUG(0, "ixj_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ if (pcmcia_loop_config(link, ixj_config_check, &dflt))
+ goto cs_failed;
+
+ if (pcmcia_request_configuration(link, &link->conf))
+ goto cs_failed;
/*
* Register the card with the core.
- */
- j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10);
+ */
+ j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
info->ndev = 1;
info->node.major = PHONE_MAJOR;
link->dev_node = &info->node;
ixj_get_serial(link, j);
return 0;
+
cs_failed:
- cs_error(link, last_fn, last_ret);
ixj_cs_release(link);
return -ENODEV;
}
.num_resources = ARRAY_SIZE(resources),
};
-static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+static int sl811_hc_init(struct device *parent, resource_size_t base_addr,
+ int irq)
{
if (platform_dev.dev.parent)
return -EBUSY;
platform_device_unregister(&platform_dev);
}
+static int sl811_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ }
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* we need an interrupt */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+ }
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
+
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
DBG(0, "sl811_cs_config(0x%p)\n", link);
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0
- || pcmcia_parse_tuple(link, &tuple, &parse)
- != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
- dflt = *cfg;
- }
-
- if (cfg->index == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- }
-
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* we need an interrupt */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
-
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
- break;
-
-next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
+ if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+ goto failed;
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
- goto cs_failed;
+ goto failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ,
pcmcia_request_irq(link, &link->irq));
else
- goto cs_failed;
+ goto failed;
CS_CHECK(RequestConfiguration,
pcmcia_request_configuration(link, &link->conf));
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
< 0) {
cs_failed:
- printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
+failed:
+ printk(KERN_WARNING "sl811_cs_config failed\n");
sl811_cs_release(link);
return -ENODEV;
}
#define MANFID_TOSHIBA 0x0098
-#define MANFID_UNGERMANN 0x02c0
+#define MANFID_UNGERMANN 0x02c0
#define MANFID_XIRCOM 0x0105
#define TUPLE_RETURN_LINK 0x01
#define TUPLE_RETURN_COMMON 0x02
-/* For ValidateCIS */
-typedef struct cisinfo_t {
- u_int Chains;
-} cisinfo_t;
-
#define CISTPL_MAX_CIS_SIZE 0x200
-/* For ReplaceCIS */
-typedef struct cisdump_t {
- u_int Length;
- cisdata_t Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-
-int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis);
-
-/* don't use outside of PCMCIA core yet */
-int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple);
-int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple_t *tuple);
-int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
-int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse);
-
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *count);
-
-/* ... but use these wrappers instead */
-#define pcmcia_get_first_tuple(p_dev, tuple) \
- pccard_get_first_tuple(p_dev->socket, p_dev->func, tuple)
-
-#define pcmcia_get_next_tuple(p_dev, tuple) \
- pccard_get_next_tuple(p_dev->socket, p_dev->func, tuple)
-
-#define pcmcia_get_tuple_data(p_dev, tuple) \
- pccard_get_tuple_data(p_dev->socket, tuple)
-
-#define pcmcia_parse_tuple(p_dev, tuple, parse) \
- pccard_parse_tuple(tuple, parse)
-
-#define pcmcia_validate_cis(p_dev, info) \
- pccard_validate_cis(p_dev->socket, p_dev->func, info)
-
#endif /* LINUX_CISTPL_H */
#define CS_WRITE 2
/* for AdjustResourceInfo */
-typedef struct adjust_t {
- u_int Action;
- u_int Resource;
- u_int Attributes;
- union {
- struct memory {
- u_long Base;
- u_long Size;
- } memory;
- struct io {
- ioaddr_t BasePort;
- ioaddr_t NumPorts;
- u_int IOAddrLines;
- } io;
- struct irq {
- u_int IRQ;
- } irq;
- } resource;
-} adjust_t;
-
/* Action field */
#define REMOVE_MANAGED_RESOURCE 1
#define ADD_MANAGED_RESOURCE 2
-#define GET_FIRST_MANAGED_RESOURCE 3
-#define GET_NEXT_MANAGED_RESOURCE 4
-/* Resource field */
-#define RES_MEMORY_RANGE 1
-#define RES_IO_RANGE 2
-#define RES_IRQ 3
-/* Attribute field */
-#define RES_IRQ_TYPE 0x03
-#define RES_IRQ_TYPE_EXCLUSIVE 0
-#define RES_IRQ_TYPE_TIME 1
-#define RES_IRQ_TYPE_DYNAMIC 2
-#define RES_IRQ_CSC 0x04
-#define RES_SHARED 0x08
-#define RES_RESERVED 0x10
-#define RES_ALLOCATED 0x20
-#define RES_REMOVED 0x40
+
typedef struct event_callback_args_t {
struct pcmcia_device *client_handle;
void *client_data;
} event_callback_args_t;
-/* for GetConfigurationInfo */
-typedef struct config_info_t {
- u_char Function;
- u_int Attributes;
- u_int Vcc, Vpp1, Vpp2;
- u_int IntType;
- u_int ConfigBase;
- u_char Status, Pin, Copy, Option, ExtStatus;
- u_int Present;
- u_int CardValues;
- u_int AssignedIRQ;
- u_int IRQAttributes;
- ioaddr_t BasePort1;
- ioaddr_t NumPorts1;
- u_int Attributes1;
- ioaddr_t BasePort2;
- ioaddr_t NumPorts2;
- u_int Attributes2;
- u_int IOAddrLines;
-} config_info_t;
-
/* For CardValues field */
#define CV_OPTION_VALUE 0x01
#define CV_STATUS_VALUE 0x02
#define WIN_BAR_MASK 0xe000
#define WIN_BAR_SHIFT 13
-/* Attributes for RegisterClient -- UNUSED -- */
-#define INFO_MASTER_CLIENT 0x01
-#define INFO_IO_CLIENT 0x02
-#define INFO_MTD_CLIENT 0x04
-#define INFO_MEM_CLIENT 0x08
-#define MAX_NUM_CLIENTS 3
-
-#define INFO_CARD_SHARE 0x10
-#define INFO_CARD_EXCL 0x20
-
-typedef struct cs_status_t {
- u_char Function;
- event_t CardState;
- event_t SocketState;
-} cs_status_t;
-
typedef struct error_info_t {
int func;
int retcode;
#define CS_EVENT_3VCARD 0x200000
#define CS_EVENT_XVCARD 0x400000
-/* Return codes */
-#define CS_SUCCESS 0x00
-#define CS_BAD_ADAPTER 0x01
-#define CS_BAD_ATTRIBUTE 0x02
-#define CS_BAD_BASE 0x03
-#define CS_BAD_EDC 0x04
-#define CS_BAD_IRQ 0x06
-#define CS_BAD_OFFSET 0x07
-#define CS_BAD_PAGE 0x08
-#define CS_READ_FAILURE 0x09
-#define CS_BAD_SIZE 0x0a
-#define CS_BAD_SOCKET 0x0b
-#define CS_BAD_TYPE 0x0d
-#define CS_BAD_VCC 0x0e
-#define CS_BAD_VPP 0x0f
-#define CS_BAD_WINDOW 0x11
-#define CS_WRITE_FAILURE 0x12
-#define CS_NO_CARD 0x14
-#define CS_UNSUPPORTED_FUNCTION 0x15
-#define CS_UNSUPPORTED_MODE 0x16
-#define CS_BAD_SPEED 0x17
-#define CS_BUSY 0x18
-#define CS_GENERAL_FAILURE 0x19
-#define CS_WRITE_PROTECTED 0x1a
-#define CS_BAD_ARG_LENGTH 0x1b
-#define CS_BAD_ARGS 0x1c
-#define CS_CONFIGURATION_LOCKED 0x1d
-#define CS_IN_USE 0x1e
-#define CS_NO_MORE_ITEMS 0x1f
-#define CS_OUT_OF_RESOURCE 0x20
-#define CS_BAD_HANDLE 0x21
-
-#define CS_BAD_TUPLE 0x40
-
-#ifdef __KERNEL__
-
-/*
- * The main Card Services entry point
- */
-
-enum service {
- AccessConfigurationRegister, AddSocketServices,
- AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
- DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
- GetClientInfo, GetConfigurationInfo, GetEventMask,
- GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
- GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
- GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
- MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
- OpenMemory, ParseTuple, ReadMemory, RegisterClient,
- RegisterEraseQueue, RegisterMTD, RegisterTimer,
- ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
- ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
- RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
- RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
- SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
- WriteMemory, BindDevice, BindMTD, ReportError,
- SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
- GetFirstWindow, GetNextWindow, GetMemPage
-};
-
-struct pcmcia_socket;
-
-int pcmcia_access_configuration_register(struct pcmcia_device *p_dev, conf_reg_t *reg);
-int pcmcia_get_configuration_info(struct pcmcia_device *p_dev, config_info_t *config);
-int pcmcia_get_mem_page(window_handle_t win, memreq_t *req);
-int pcmcia_map_mem_page(window_handle_t win, memreq_t *req);
-int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
-int pcmcia_release_window(window_handle_t win);
-int pcmcia_request_configuration(struct pcmcia_device *p_dev, config_req_t *req);
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
-int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req);
-int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req, window_handle_t *wh);
-int pcmcia_suspend_card(struct pcmcia_socket *skt);
-int pcmcia_resume_card(struct pcmcia_socket *skt);
-int pcmcia_eject_card(struct pcmcia_socket *skt);
-int pcmcia_insert_card(struct pcmcia_socket *skt);
-int pccard_reset_card(struct pcmcia_socket *skt);
-
-struct pcmcia_device * pcmcia_dev_present(struct pcmcia_device *p_dev);
-void pcmcia_disable_device(struct pcmcia_device *p_dev);
-
-struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt);
-void pcmcia_put_socket(struct pcmcia_socket *skt);
-
-/* compatibility functions */
-#define pcmcia_reset_card(p_dev, req) \
- pccard_reset_card(p_dev->socket)
-
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_CS_H */
#include <sys/types.h>
#endif
-#if defined(__arm__) || defined(__mips__) || defined(__avr32__) || \
- defined(__bfin__)
-/* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
-typedef u_int ioaddr_t;
-#else
-typedef u_short ioaddr_t;
-#endif
-
typedef u_short socket_t;
typedef u_int event_t;
typedef u_char cisdata_t;
/*
- * Copyright (2003-2004) Dominik Brodowski <linux@brodo.de>
- * David Woodhouse
+ * device_id.h -- PCMCIA driver matching helpers
*
- * License: GPL v2
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (C) 2003 - 2004 David Woodhouse
+ * (C) 2003 - 2004 Dominik Brodowski
*/
+#ifndef _LINUX_PCMCIA_DEVICE_ID_H
+#define _LINUX_PCMCIA_DEVICE_ID_H
+
+#ifdef __KERNEL__
+
#define PCMCIA_DEVICE_MANF_CARD(manf, card) { \
.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
PCMCIA_DEV_ID_MATCH_CARD_ID, \
#define PCMCIA_DEVICE_NULL { .match_flags = 0, }
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_PCMCIA_DEVICE_ID_H */
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
* (C) 1999 David A. Hinds
- * (C) 2003 - 2004 Dominik Brodowski
+ * (C) 2003 - 2008 Dominik Brodowski
*/
#ifndef _LINUX_DS_H
#include <pcmcia/cs_types.h>
#include <pcmcia/device_id.h>
-typedef struct tuple_parse_t {
- tuple_t tuple;
- cisdata_t data[255];
- cisparse_t parse;
-} tuple_parse_t;
-
-typedef struct win_info_t {
- window_handle_t handle;
- win_req_t window;
- memreq_t map;
-} win_info_t;
-
-typedef struct bind_info_t {
- dev_info_t dev_info;
- u_char function;
- struct pcmcia_device *instance;
- char name[DEV_NAME_LEN];
- u_short major, minor;
- void *next;
-} bind_info_t;
-
-typedef struct mtd_info_t {
- dev_info_t dev_info;
- u_int Attributes;
- u_int CardOffset;
-} mtd_info_t;
-
-typedef struct region_info_t {
- u_int Attributes;
- u_int CardOffset;
- u_int RegionSize;
- u_int AccessSpeed;
- u_int BlockSize;
- u_int PartMultiple;
- u_char JedecMfr, JedecInfo;
- memory_handle_t next;
-} region_info_t;
-#define REGION_TYPE 0x0001
-#define REGION_TYPE_CM 0x0000
-#define REGION_TYPE_AM 0x0001
-#define REGION_PREFETCH 0x0008
-#define REGION_CACHEABLE 0x0010
-#define REGION_BAR_MASK 0xe000
-#define REGION_BAR_SHIFT 13
-
-typedef union ds_ioctl_arg_t {
- adjust_t adjust;
- config_info_t config;
- tuple_t tuple;
- tuple_parse_t tuple_parse;
- client_req_t client_req;
- cs_status_t status;
- conf_reg_t conf_reg;
- cisinfo_t cisinfo;
- region_info_t region;
- bind_info_t bind_info;
- mtd_info_t mtd_info;
- win_info_t win_info;
- cisdump_t cisdump;
-} ds_ioctl_arg_t;
-
-#define DS_ADJUST_RESOURCE_INFO _IOWR('d', 2, adjust_t)
-#define DS_GET_CONFIGURATION_INFO _IOWR('d', 3, config_info_t)
-#define DS_GET_FIRST_TUPLE _IOWR('d', 4, tuple_t)
-#define DS_GET_NEXT_TUPLE _IOWR('d', 5, tuple_t)
-#define DS_GET_TUPLE_DATA _IOWR('d', 6, tuple_parse_t)
-#define DS_PARSE_TUPLE _IOWR('d', 7, tuple_parse_t)
-#define DS_RESET_CARD _IO ('d', 8)
-#define DS_GET_STATUS _IOWR('d', 9, cs_status_t)
-#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
-#define DS_VALIDATE_CIS _IOR ('d', 11, cisinfo_t)
-#define DS_SUSPEND_CARD _IO ('d', 12)
-#define DS_RESUME_CARD _IO ('d', 13)
-#define DS_EJECT_CARD _IO ('d', 14)
-#define DS_INSERT_CARD _IO ('d', 15)
-#define DS_GET_FIRST_REGION _IOWR('d', 16, region_info_t)
-#define DS_GET_NEXT_REGION _IOWR('d', 17, region_info_t)
-#define DS_REPLACE_CIS _IOWR('d', 18, cisdump_t)
-#define DS_GET_FIRST_WINDOW _IOR ('d', 19, win_info_t)
-#define DS_GET_NEXT_WINDOW _IOWR('d', 20, win_info_t)
-#define DS_GET_MEM_PAGE _IOWR('d', 21, win_info_t)
-
-#define DS_BIND_REQUEST _IOWR('d', 60, bind_info_t)
-#define DS_GET_DEVICE_INFO _IOWR('d', 61, bind_info_t)
-#define DS_GET_NEXT_DEVICE _IOWR('d', 62, bind_info_t)
-#define DS_UNBIND_REQUEST _IOW ('d', 63, bind_info_t)
-#define DS_BIND_MTD _IOWR('d', 64, mtd_info_t)
-
#ifdef __KERNEL__
#include <linux/device.h>
#include <pcmcia/ss.h>
-typedef struct dev_node_t {
- char dev_name[DEV_NAME_LEN];
- u_short major, minor;
- struct dev_node_t *next;
-} dev_node_t;
-
-
+/*
+ * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus
+ * a.k.a. PCI drivers
+ */
struct pcmcia_socket;
+struct pcmcia_device;
struct config_t;
+/* dynamic device IDs for PCMCIA device drivers. See
+ * Documentation/pcmcia/driver.txt for details.
+*/
struct pcmcia_dynids {
spinlock_t lock;
struct list_head list;
int pcmcia_register_driver(struct pcmcia_driver *driver);
void pcmcia_unregister_driver(struct pcmcia_driver *driver);
+/* Some drivers use dev_node_t to store char or block device information.
+ * Don't use this in new drivers, though.
+ */
+typedef struct dev_node_t {
+ char dev_name[DEV_NAME_LEN];
+ u_short major, minor;
+ struct dev_node_t *next;
+} dev_node_t;
struct pcmcia_device {
/* the socket and the device_no [for multifunction devices]
#define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
#define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv)
+/* deprecated -- don't use! */
#define handle_to_dev(handle) (handle->dev)
-/* error reporting */
-void cs_error(struct pcmcia_device *handle, int func, int ret);
+
+/* (deprecated) error reporting by PCMCIA devices. Use dev_printk()
+ * or dev_dbg() directly in the driver, without referring to pcmcia_error_func()
+ * and/or pcmcia_error_ret() for those functions will go away soon.
+ */
+enum service {
+ AccessConfigurationRegister, AddSocketServices,
+ AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
+ DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
+ GetClientInfo, GetConfigurationInfo, GetEventMask,
+ GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
+ GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
+ GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
+ MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
+ OpenMemory, ParseTuple, ReadMemory, RegisterClient,
+ RegisterEraseQueue, RegisterMTD, RegisterTimer,
+ ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
+ ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
+ RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
+ RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
+ SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
+ WriteMemory, BindDevice, BindMTD, ReportError,
+ SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
+ GetFirstWindow, GetNextWindow, GetMemPage
+};
+const char *pcmcia_error_func(int func);
+const char *pcmcia_error_ret(int ret);
+
+#define cs_error(p_dev, func, ret) \
+ { \
+ dev_printk(KERN_NOTICE, &p_dev->dev, \
+ "%s : %s\n", \
+ pcmcia_error_func(func), \
+ pcmcia_error_ret(ret)); \
+ }
+
+/* CIS access.
+ * Use the pcmcia_* versions in PCMCIA drivers
+ */
+int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse);
+
+int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function,
+ tuple_t *tuple);
+#define pcmcia_get_first_tuple(p_dev, tuple) \
+ pccard_get_first_tuple(p_dev->socket, p_dev->func, tuple)
+
+int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function,
+ tuple_t *tuple);
+#define pcmcia_get_next_tuple(p_dev, tuple) \
+ pccard_get_next_tuple(p_dev->socket, p_dev->func, tuple)
+
+int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
+#define pcmcia_get_tuple_data(p_dev, tuple) \
+ pccard_get_tuple_data(p_dev->socket, tuple)
+
+
+/* loop CIS entries for valid configuration */
+int pcmcia_loop_config(struct pcmcia_device *p_dev,
+ int (*conf_check) (struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data),
+ void *priv_data);
+
+/* is the device still there? */
+struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *p_dev);
+
+/* low-level interface reset */
+int pcmcia_reset_card(struct pcmcia_socket *skt);
+
+/* CIS config */
+int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
+ conf_reg_t *reg);
+
+/* device configuration */
+int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
+int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req);
+int pcmcia_request_configuration(struct pcmcia_device *p_dev,
+ config_req_t *req);
+
+int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req,
+ window_handle_t *wh);
+int pcmcia_release_window(window_handle_t win);
+
+int pcmcia_get_mem_page(window_handle_t win, memreq_t *req);
+int pcmcia_map_mem_page(window_handle_t win, memreq_t *req);
+
+int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
+void pcmcia_disable_device(struct pcmcia_device *p_dev);
#endif /* __KERNEL__ */
+
+
+
+/* Below, there are only definitions which are used by
+ * - the PCMCIA ioctl
+ * - deprecated PCMCIA userspace tools only
+ *
+ * here be dragons ... here be dragons ... here be dragons ... here be drag
+ */
+
+#if defined(CONFIG_PCMCIA_IOCTL) || !defined(__KERNEL__)
+
+#if defined(__arm__) || defined(__mips__) || defined(__avr32__) || \
+ defined(__bfin__)
+/* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
+typedef u_int ioaddr_t;
+#else
+typedef u_short ioaddr_t;
+#endif
+
+/* for AdjustResourceInfo */
+typedef struct adjust_t {
+ u_int Action;
+ u_int Resource;
+ u_int Attributes;
+ union {
+ struct memory {
+ u_long Base;
+ u_long Size;
+ } memory;
+ struct io {
+ ioaddr_t BasePort;
+ ioaddr_t NumPorts;
+ u_int IOAddrLines;
+ } io;
+ struct irq {
+ u_int IRQ;
+ } irq;
+ } resource;
+} adjust_t;
+
+/* Action field */
+#define REMOVE_MANAGED_RESOURCE 1
+#define ADD_MANAGED_RESOURCE 2
+#define GET_FIRST_MANAGED_RESOURCE 3
+#define GET_NEXT_MANAGED_RESOURCE 4
+/* Resource field */
+#define RES_MEMORY_RANGE 1
+#define RES_IO_RANGE 2
+#define RES_IRQ 3
+/* Attribute field */
+#define RES_IRQ_TYPE 0x03
+#define RES_IRQ_TYPE_EXCLUSIVE 0
+#define RES_IRQ_TYPE_TIME 1
+#define RES_IRQ_TYPE_DYNAMIC 2
+#define RES_IRQ_CSC 0x04
+#define RES_SHARED 0x08
+#define RES_RESERVED 0x10
+#define RES_ALLOCATED 0x20
+#define RES_REMOVED 0x40
+
+
+typedef struct tuple_parse_t {
+ tuple_t tuple;
+ cisdata_t data[255];
+ cisparse_t parse;
+} tuple_parse_t;
+
+typedef struct win_info_t {
+ window_handle_t handle;
+ win_req_t window;
+ memreq_t map;
+} win_info_t;
+
+typedef struct bind_info_t {
+ dev_info_t dev_info;
+ u_char function;
+ struct pcmcia_device *instance;
+ char name[DEV_NAME_LEN];
+ u_short major, minor;
+ void *next;
+} bind_info_t;
+
+typedef struct mtd_info_t {
+ dev_info_t dev_info;
+ u_int Attributes;
+ u_int CardOffset;
+} mtd_info_t;
+
+typedef struct region_info_t {
+ u_int Attributes;
+ u_int CardOffset;
+ u_int RegionSize;
+ u_int AccessSpeed;
+ u_int BlockSize;
+ u_int PartMultiple;
+ u_char JedecMfr, JedecInfo;
+ memory_handle_t next;
+} region_info_t;
+
+#define REGION_TYPE 0x0001
+#define REGION_TYPE_CM 0x0000
+#define REGION_TYPE_AM 0x0001
+#define REGION_PREFETCH 0x0008
+#define REGION_CACHEABLE 0x0010
+#define REGION_BAR_MASK 0xe000
+#define REGION_BAR_SHIFT 13
+
+/* For ReplaceCIS */
+typedef struct cisdump_t {
+ u_int Length;
+ cisdata_t Data[CISTPL_MAX_CIS_SIZE];
+} cisdump_t;
+
+/* for GetConfigurationInfo */
+typedef struct config_info_t {
+ u_char Function;
+ u_int Attributes;
+ u_int Vcc, Vpp1, Vpp2;
+ u_int IntType;
+ u_int ConfigBase;
+ u_char Status, Pin, Copy, Option, ExtStatus;
+ u_int Present;
+ u_int CardValues;
+ u_int AssignedIRQ;
+ u_int IRQAttributes;
+ ioaddr_t BasePort1;
+ ioaddr_t NumPorts1;
+ u_int Attributes1;
+ ioaddr_t BasePort2;
+ ioaddr_t NumPorts2;
+ u_int Attributes2;
+ u_int IOAddrLines;
+} config_info_t;
+
+/* For ValidateCIS */
+typedef struct cisinfo_t {
+ u_int Chains;
+} cisinfo_t;
+
+typedef struct cs_status_t {
+ u_char Function;
+ event_t CardState;
+ event_t SocketState;
+} cs_status_t;
+
+typedef union ds_ioctl_arg_t {
+ adjust_t adjust;
+ config_info_t config;
+ tuple_t tuple;
+ tuple_parse_t tuple_parse;
+ client_req_t client_req;
+ cs_status_t status;
+ conf_reg_t conf_reg;
+ cisinfo_t cisinfo;
+ region_info_t region;
+ bind_info_t bind_info;
+ mtd_info_t mtd_info;
+ win_info_t win_info;
+ cisdump_t cisdump;
+} ds_ioctl_arg_t;
+
+#define DS_ADJUST_RESOURCE_INFO _IOWR('d', 2, adjust_t)
+#define DS_GET_CONFIGURATION_INFO _IOWR('d', 3, config_info_t)
+#define DS_GET_FIRST_TUPLE _IOWR('d', 4, tuple_t)
+#define DS_GET_NEXT_TUPLE _IOWR('d', 5, tuple_t)
+#define DS_GET_TUPLE_DATA _IOWR('d', 6, tuple_parse_t)
+#define DS_PARSE_TUPLE _IOWR('d', 7, tuple_parse_t)
+#define DS_RESET_CARD _IO ('d', 8)
+#define DS_GET_STATUS _IOWR('d', 9, cs_status_t)
+#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
+#define DS_VALIDATE_CIS _IOR ('d', 11, cisinfo_t)
+#define DS_SUSPEND_CARD _IO ('d', 12)
+#define DS_RESUME_CARD _IO ('d', 13)
+#define DS_EJECT_CARD _IO ('d', 14)
+#define DS_INSERT_CARD _IO ('d', 15)
+#define DS_GET_FIRST_REGION _IOWR('d', 16, region_info_t)
+#define DS_GET_NEXT_REGION _IOWR('d', 17, region_info_t)
+#define DS_REPLACE_CIS _IOWR('d', 18, cisdump_t)
+#define DS_GET_FIRST_WINDOW _IOR ('d', 19, win_info_t)
+#define DS_GET_NEXT_WINDOW _IOWR('d', 20, win_info_t)
+#define DS_GET_MEM_PAGE _IOWR('d', 21, win_info_t)
+
+#define DS_BIND_REQUEST _IOWR('d', 60, bind_info_t)
+#define DS_GET_DEVICE_INFO _IOWR('d', 61, bind_info_t)
+#define DS_GET_NEXT_DEVICE _IOWR('d', 62, bind_info_t)
+#define DS_UNBIND_REQUEST _IOW ('d', 63, bind_info_t)
+#define DS_BIND_MTD _IOWR('d', 64, mtd_info_t)
+
+
+/* used in userspace only */
+#define CS_IN_USE 0x1e
+
+#define INFO_MASTER_CLIENT 0x01
+#define INFO_IO_CLIENT 0x02
+#define INFO_MTD_CLIENT 0x04
+#define INFO_MEM_CLIENT 0x08
+#define MAX_NUM_CLIENTS 3
+
+#define INFO_CARD_SHARE 0x10
+#define INFO_CARD_EXCL 0x20
+
+
+#endif /* !defined(__KERNEL__) || defined(CONFIG_PCMCIA_IOCTL) */
+
#endif /* _LINUX_DS_H */
/* for GetSocket, SetSocket */
typedef struct socket_state_t {
- u_int flags;
- u_int csc_mask;
- u_char Vcc, Vpp;
- u_char io_irq;
+ u_int flags;
+ u_int csc_mask;
+ u_char Vcc, Vpp;
+ u_char io_irq;
} socket_state_t;
extern socket_state_t dead_socket;
#define HOOK_POWER_PRE 0x01
#define HOOK_POWER_POST 0x02
-
typedef struct pccard_io_map {
- u_char map;
- u_char flags;
- u_short speed;
- u_int start, stop;
+ u_char map;
+ u_char flags;
+ u_short speed;
+ u_int start, stop;
} pccard_io_map;
typedef struct pccard_mem_map {
- u_char map;
- u_char flags;
- u_short speed;
- u_long static_start;
- u_int card_start;
- struct resource *res;
+ u_char map;
+ u_char flags;
+ u_short speed;
+ u_long static_start;
+ u_int card_start;
+ struct resource *res;
} pccard_mem_map;
-typedef struct cb_bridge_map {
- u_char map;
- u_char flags;
- u_int start, stop;
-} cb_bridge_map;
-
-/*
- * Socket operations.
- */
-struct pcmcia_socket;
-
-struct pccard_operations {
- int (*init)(struct pcmcia_socket *sock);
- int (*suspend)(struct pcmcia_socket *sock);
- int (*get_status)(struct pcmcia_socket *sock, u_int *value);
- int (*set_socket)(struct pcmcia_socket *sock, socket_state_t *state);
- int (*set_io_map)(struct pcmcia_socket *sock, struct pccard_io_map *io);
- int (*set_mem_map)(struct pcmcia_socket *sock, struct pccard_mem_map *mem);
-};
-
-struct pccard_resource_ops {
- int (*validate_mem) (struct pcmcia_socket *s);
- int (*adjust_io_region) (struct resource *res,
- unsigned long r_start,
- unsigned long r_end,
- struct pcmcia_socket *s);
- struct resource* (*find_io) (unsigned long base, int num,
- unsigned long align,
- struct pcmcia_socket *s);
- struct resource* (*find_mem) (unsigned long base, unsigned long num,
- unsigned long align, int low,
- struct pcmcia_socket *s);
- int (*add_io) (struct pcmcia_socket *s,
- unsigned int action,
- unsigned long r_start,
- unsigned long r_end);
- int (*add_mem) (struct pcmcia_socket *s,
- unsigned int action,
- unsigned long r_start,
- unsigned long r_end);
- int (*init) (struct pcmcia_socket *s);
- void (*exit) (struct pcmcia_socket *s);
-};
-/* SS_CAP_STATIC_MAP */
-extern struct pccard_resource_ops pccard_static_ops;
-/* !SS_CAP_STATIC_MAP */
-extern struct pccard_resource_ops pccard_nonstatic_ops;
-
-/* static mem, dynamic IO sockets */
-extern struct pccard_resource_ops pccard_iodyn_ops;
-
-/*
- * Calls to set up low-level "Socket Services" drivers
- */
-struct pcmcia_socket;
-
typedef struct io_window_t {
u_int InUse, Config;
struct resource *res;
/* Maximum number of memory windows per socket */
#define MAX_WIN 4
+
+/*
+ * Socket operations.
+ */
+struct pcmcia_socket;
+struct pccard_resource_ops;
struct config_t;
struct pcmcia_callback;
struct user_info_t;
+struct pccard_operations {
+ int (*init)(struct pcmcia_socket *s);
+ int (*suspend)(struct pcmcia_socket *s);
+ int (*get_status)(struct pcmcia_socket *s, u_int *value);
+ int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state);
+ int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io);
+ int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem);
+};
+
struct pcmcia_socket {
struct module *owner;
spinlock_t lock;
io_window_t io[MAX_IO_WIN];
window_t win[MAX_WIN];
struct list_head cis_cache;
- u_int fake_cis_len;
- char *fake_cis;
+ size_t fake_cis_len;
+ u8 *fake_cis;
struct list_head socket_list;
struct completion socket_released;
struct pci_dev * cb_dev;
- /* socket setup is done so resources should be able to be allocated. Only
- * if set to 1, calls to find_{io,mem}_region are handled, and insertion
- * events are actually managed by the PCMCIA layer.*/
+ /* socket setup is done so resources should be able to be allocated.
+ * Only if set to 1, calls to find_{io,mem}_region are handled, and
+ * insertio events are actually managed by the PCMCIA layer.*/
u8 resource_setup_done:1;
- /* is set to one if resource setup is done using adjust_resource_info() */
+ /* It's old if resource setup is done using adjust_resource_info() */
u8 resource_setup_old:1;
u8 resource_setup_new:1;
/* Zoom video behaviour is so chip specific its not worth adding
this to _ops */
- void (*zoom_video)(struct pcmcia_socket *, int);
+ void (*zoom_video)(struct pcmcia_socket *,
+ int);
/* so is power hook */
int (*power_hook)(struct pcmcia_socket *sock, int operation);
-#ifdef CONFIG_CARDBUS
+
/* allows tuning the CB bridge before loading driver for the CB card */
+#ifdef CONFIG_CARDBUS
void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
#endif
/* state thread */
- struct mutex skt_mutex; /* protects socket h/w state */
-
struct task_struct *thread;
struct completion thread_done;
- spinlock_t thread_lock; /* protects thread_events */
unsigned int thread_events;
+ /* protects socket h/w state */
+ struct mutex skt_mutex;
+ /* protects thread_events */
+ spinlock_t thread_lock;
/* pcmcia (16-bit) */
struct pcmcia_callback *callback;
#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
- struct list_head devices_list; /* PCMCIA devices */
- u8 device_count; /* the number of devices, used
- * only internally and subject
- * to incorrectness and change */
+ /* The following elements refer to 16-bit PCMCIA devices inserted
+ * into the socket */
+ struct list_head devices_list;
+
+ /* the number of devices, used only internally and subject to
+ * incorrectness and change */
+ u8 device_count;
+ /* 16-bit state: */
struct {
- u8 present:1, /* PCMCIA card is present in socket */
- busy:1, /* "master" ioctl is used */
- dead:1, /* pcmcia module is being unloaded */
- device_add_pending:1, /* a multifunction-device
- * add event is pending */
- mfc_pfc:1, /* the pending event adds a mfc (1) or pfc (0) */
- reserved:3;
- } pcmcia_state;
-
- struct work_struct device_add; /* for adding further pseudo-multifunction
- * devices */
+ /* PCMCIA card is present in socket */
+ u8 present:1;
+ /* "master" ioctl is used */
+ u8 busy:1;
+ /* pcmcia module is being unloaded */
+ u8 dead:1;
+ /* a multifunction-device add event is pending */
+ u8 device_add_pending:1;
+ /* the pending event adds a mfc (1) or pfc (0) */
+ u8 mfc_pfc:1;
+
+ u8 reserved:3;
+ } pcmcia_state;
+
+
+ /* for adding further pseudo-multifunction devices */
+ struct work_struct device_add;
#ifdef CONFIG_PCMCIA_IOCTL
struct user_info_t *user;
wait_queue_head_t queue;
-#endif
-#endif
+#endif /* CONFIG_PCMCIA_IOCTL */
+#endif /* CONFIG_PCMCIA */
/* cardbus (32-bit) */
#ifdef CONFIG_CARDBUS
struct resource * cb_cis_res;
void __iomem *cb_cis_virt;
-#endif
+#endif /* CONFIG_CARDBUS */
/* socket device */
struct device dev;
- void *driver_data; /* data internal to the socket driver */
-
+ /* data internal to the socket driver */
+ void *driver_data;
};
-struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr);
+/* socket drivers must define the resource operations type they use. There
+ * are three options:
+ * - pccard_static_ops iomem and ioport areas are assigned statically
+ * - pccard_iodyn_ops iomem areas is assigned statically, ioport
+ * areas dynamically
+ * - pccard_nonstatic_ops iomem and ioport areas are assigned dynamically.
+ * If this option is selected, use
+ * "select PCCARD_NONSTATIC" in Kconfig.
+ */
+extern struct pccard_resource_ops pccard_static_ops;
+extern struct pccard_resource_ops pccard_iodyn_ops;
+extern struct pccard_resource_ops pccard_nonstatic_ops;
+/* socket drivers are expected to use these callbacks in their .drv struct */
+extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_resume(struct device *dev);
+
+/* socket drivers use this callback in their IRQ handler */
+extern void pcmcia_parse_events(struct pcmcia_socket *socket,
+ unsigned int events);
-extern void pcmcia_parse_events(struct pcmcia_socket *socket, unsigned int events);
+/* to register and unregister a socket */
extern int pcmcia_register_socket(struct pcmcia_socket *socket);
extern void pcmcia_unregister_socket(struct pcmcia_socket *socket);
-extern struct class pcmcia_socket_class;
-
-/* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
-extern int pcmcia_socket_dev_resume(struct device *dev);
#endif /* _LINUX_SS_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff